As a reaction proceeds, the value of Q decreases steadily until it reaches.
What is Equilibrium Constant ?The equilibrium constant of a chemical reaction usually denoted by the symbol K that express the relationship between the amount of reactants and products when a chemical reaction reaches equilibrium.
It is expressed as:
[tex]K_{C} = \frac{[C]^{c} \times [D]^{d} \times ...}{[A]^{a} \times [B]^{b} \times ...}[/tex]
where,
K = Equilibrium constant
A, B = Products
C, D = Reactants
[A] = equilibrium concentration of A in moles
a = number of moles of A
What is Reaction Quotient ?The measurement of relative amount of reactants and products which are present in a reaction at a particular point in time.
Q < K
Q ∝ [tex]\frac{\text{Products}}{\text{Reactants}}[/tex]
Thus from the above conclusion we can say that As a reaction proceeds, the value of Q decreases steadily until it reaches.
Learn more about the Equilibrium Constant here: brainly.com/question/12858312
#SPJ4
What is Atom??????????
An atom is a particle of matter that uniquely defines a chemical
element. An atom consists of a central nucleus that is usually surrounded by one or more electrons. Each electron is negatively charged. The nucleus is positively charged, and contains one or more relatively heavy particles known as protons and neutrons.
Calculate your % yield of co2 in the reaction based on the grams of nahco3 being the limiting reagent in the reaction.
The percent yield of CO₂ is 93.3%.
What is the percent yield of CO₂?The percent yield of a substance is given as follows:
Percent yield = actual yield/theoretical yield * 100 %The equation of the reaction is used to determine the theoretical yield.
NaHCO₃ + CH₃COOH → CH₃COONa + H₂O + CO₂Moe ratio of sodium bicarbonate and CO₂ is 1 : 1.
Given that sodium bicarbonate is the limiting reactant, the theoretical yield of CO₂ will be:
Moles of NaHCO₃ reacting = 2.01/84 = 0.0239 moles
Theoretical yield of CO₂ = 0.0239 moles * 22.4L/mol = 0.536 L
Actual yield = 0.50 L
Percent yield = 0.50/0.536 * 100%
Percent yield = 93.3%
In conclusion, the percent yield is the ratio of the actual yield and theoretical yield.
Note that the complete question is given below:
Calculate your % yield of co2 in the reaction based on the grams of nahco3 being the limiting reagent in the reaction between 2.01 g of sodium bicarbonate and 24.6 mL of 1.5 M acetic acid? They produce 0.50 L of at s.t.p.
Learn mores about percent yield at: https://brainly.com/question/8638404
#SPJ1
Ethene is exposed to h2 in a solution containing a chunk of solid palladium. if it reacts successfully, the original alkene will:________
If ethene and hydrogen reacts successfully in a solution containing a chunk of solid palladium, the original alkene will become unsaturated.
What is hydrogenation?The term hydrogenation is used in chemistry to describe that addition of hydrogen to an unsaturated compound. Recall that ethene is an un saturated compound (alkene) and one of the reactions that an unsaturated compound can undergo is the addition of atoms or group across the double bond to yield adducts.
In this case, the adduct is a compound that is saturated ad will not have the same properties as ethene because the carbon carbon double bond that was characteristic of ethene has been replaced by a carbon carbon single bond.
Thus, if ethene and hydrogen reacts successfully in a solution containing a chunk of solid palladium, the original alkene will become unsaturated.
Learn more about alkene:https://brainly.com/question/13910028
#SPJ1
Match the instrument described below with the decimal place of the
value to which this instrument must be recorded.
our meter stick
our quadruple beam scale
a 100 mL cylinder
a 1 L cylinder
The decimal place value of these instrument must be recorded as (i) our meter scale = 1 (ii) our quadruple beam scale = 0.001 (iii) a 100 mL cylinder = 1 (iv) a 1 L cylinder = 0.001.
What is Meter Stick ?Meter stick which is used to measure the length especially used in the construction industry. The meter stick is 1 meter long. The metric unit for length is meter.
What is Quadruple beam scale ?This is the instrument which is used to measure the mass very precisely. In quadruple beam scale the reading error is 0.001.
Thus from the above conclusion we can say that The decimal place value of these instrument must be recorded as (i) our meter scale = 1 (ii) our quadruple beam scale = 0.001 (iii) a 100 mL cylinder = 1 (iv) a 1 L cylinder = 0.001.
Learn more about the Instrument here: https://brainly.com/question/4674934
#SPJ1
Disclaimer: The question was given incomplete on the portal. Here is the complete question.
Question: Match the instrument described below with the decimal place of the value to which this instrument must be recorded. ( 1 , 0.01 , 0.001 , 0.1 , 10 choose)
our meter stick =
our quadruple beam scale =
a 100 ml cylinder=
a 1 L cylinder=
There are exactly 1000 m in 1 km. how many significant figures does this number have?
Answer:
There is 1 significant figure
Explanation:
In the number 1000, 1 is the only number that counts as a significant figure since the zeros are not in between two non-zero numbers, and there isn't a decimal place either.
How much energy does a 9 × 108 m wavelength photon have?
Answer:
2.2 x 10⁻³⁴ J
or
2.2 x 10⁻¹⁸ J
Explanation:
You can calculate the energy using the photon energy equation:
E = hc / λ
In this equation,
-----> E = energy (J)
-----> h = Planck's Constant (6.626 x 10⁻³⁴ J*s)
-----> c = speed of light (3.0 x 10⁸ m/s)
-----> λ = wavelength (m)
You can plug the given wavelength, along with the other constants, into the equation and simplify to find the energy.
E = hc / λ
E = (6.626 x 10⁻³⁴ J*s)(3.0 x 10⁸ m/s) / (9 x 10⁸ m)
E = 2.2 x 10⁻³⁴ J
I suspect that you may have forgotten the negative sign in front of the 8 (9 x 10⁻⁸). This would change your answer to 2.2 x 10⁻¹⁸ J.
A measure of peak separation in a chromatographic method that equals the difference in retention time for two components divided by the average of their peak widths is the definition of
A measure of peak separation in a chromatographic method that equals the difference in retention time for two components divided by the average of their peak widths is the definition of resolution.
Retention time can be referred to as the amount of time a solute spends in the stationary and mobile phases of a column.
The analyte's interaction with the stationary phase determines the longer retention period.
The duration of retention will increase as the interaction becomes more strong.
Resolution is defined as the peak separation in a chromatographic procedure that is equal to the difference in retention time for two components divided by the average of their peak widths.
Learn more about resolution
https://brainly.com/question/14300434
#SPJ4
Assume there is an equal mass of each gas at a given temperature and pressure. Arrange the following gases based on the amount of volume they occupy, from the largest to the smallest volume.
At a given temperature and pressure, the arrangement of gases based on the amount of volume they occupy, from the largest to the smallest volume is CH[tex]_{4}[/tex] < NH[tex]_{3}[/tex] < Ar < SO₂ < Cl₂ .
According to Avogadro's law, all gases with an identical volume and the same temperature and pressure have an equal number of molecules.
If the temperature and pressure are constant, the volume and amount (in moles) of an ideal gas for a given mass are directly proportional.
The volume of gas ∝ No. of moles of gas
It means that the more the no. of moles of gas, the greater will be the volume of gas.
Now, No. of moles = Given mass/ Molar mass
Given,
There is an equal mass of each gas at a given temperature and pressure.
So,
No. of moles is inversely proportional to the Molar mass of the gas.
Therefore we can conclude that the less the molar mass of gas, the more will be the no. of moles and the higher will be the volume of that gas.
The gas with the least molar mass will occupy the highest volume.
The molar mass of [tex]CH_{4}[/tex] = 16g/mol
The molar mass of [tex]NH_{3}[/tex] = 17g/mol
The molar mass of [tex]Cl_{2}[/tex] = 70g/mol
The molar mass of Ar = 40g/mol
The molar mass of [tex]SO_{2}[/tex] = 64g/mol
Arrangement of gases on basis of molar mass
Cl₂ < SO₂ < Ar < [tex]NH_{3}[/tex] < [tex]CH_{4}[/tex]
So Arrangement on basis of decreasing volume
[tex]CH_{4} < NH_{3} < Ar < SO_{2} < Cl_{2}[/tex]
Learn more about Avogadro's law here https://brainly.com/question/12779877
#SPJ1
1. Explain why halogens are rarely found in native state?
Halogens are rarely found in native state because halogens are highly reactive.
What is Halogens ?The group 17 elements are known as Halogen group. These elements include Fluorine, Chlorine, Bromine, Iodine and Astatine. Halogens react with metals to form salts. Halogens are non metals. Halogens are highly reactive and halogens are never found in pure form. Halogens not occur in free state.
How many valence electron are present in Halogens ?Halogens have seven valence electrons in the outermost shell. The electronic configuration of Halogen is ns² np⁵.
Thus from the above conclusion we can say that Halogens are rarely found in native state because halogens are highly reactive.
Learn more about the Halogens here: https://brainly.com/question/364367
#SPJ1
The bond_____
covalent bond.
is the actual number of bonded pairs of electrons in a
A covalent bond is the exact number of bonded pairs of electrons in a compound
One electron is added by each atom to a pair of shared electrons in a single bond. While double bonds share only one pair of electrons, triple bonds share three pairs. Bonds with multiple covalent bonds exchange several electron pairs
Covalent bonding happens when atoms share electron pairs. Atoms join together through covalent bonds to form a full electron shell, which boosts stability. By sharing their outermost (valence) electrons, atoms can fill out their outer electron shell and become stable. Nonmetals will swiftly create covalent bonds with other nonmetals in order to achieve stability.
To learn more about Covalent Bond please visit -
https://brainly.com/question/19382448
#SPJ1
In which form are water molecules most closely bonded to each other?
Answer:
In solid
Explanation:
As a solid has very tightly packed molecules which move very difficulty and only vibrate
What product is used in a pedicure bath to cleanse and soften the skin? a foot masque a foot soak massage oil cuticle remover submitnext
The product which is used in a pedicure bath to cleanse and soften the skin is foot soak
What is skin pedicure?Skin pedicure is a special and cosmetic treatment of the body's skin including the feet and toenails, analogous to a manicure.
So therefore, the product which is used in a pedicure bath to cleanse and soften the skin is foot soak
Learn more about skin :
https://brainly.com/question/306377
#SPJ1
The graph below shows how the pH of the soil in
a farmer's field changed over a period of time.
At which point, A, B, C or D, did the farmer apply
lime to the field?
Answer:
Point B
Explanation:
From 0 - 7 on the pH scale, substances are said to be acidic. At 7, the substance is said to be neutral. From 7 - 14, substances are basic.
Lime is a basic substance. Therefore, when it is added to the soil, one should expect that the soil becomes more basic. On the graph, this should be represented by the line increasing in pH. As such, the point at which lime was added was most likely Point B.
A boy of mass 60 kg and a girl of mass 40 kg are together and at rest on a frozen pond and push each other apart. The girl moves in a negative direction with a speed of 3 m/s. What must be the total final momentum of the boy and girl combined?
A. 120 kgm/s
B. -100 kgm/s
C. 0 kgm/s
D. -120 kgm/s
The aggregate ultimate momentum of the boy and girl must be 0 kgm/s (option C).
Conservation of momentum:
According to the principle of momentum conservation, momentum is only modified by the forces acting as they are outlined by Newton's equations of motion; momentum is never generated nor destroyed inside a problem domain.
Example- A bullet leaves the pistol when it is fired and picks up speed. The gun recoils to maintain the system's motion. After the pistol is discharged, the total momentum of the pistol and the bullet will be zero in accordance with the law of conservation of momentum.What is Momentum?
A characteristic of a moving body that it possesses due to its mass and motion and is equal to the sum of its mass and speed.
Therefore, according to the momentum conservation law, it can be concluded that the aggregate end momentum of the boy and girl must be 0 kgm/s (option C).
Learn more about momentum here:
https://brainly.com/question/4956182
#SPJ1
What amino acid residue present in the specificity pocket allows trypsin to bind to peptides containing arg or lys?
The amino acid residue present in the specificity pocket allows trypsin to bind to peptides containing arg or lys will be "Asp".
Chymotrypsin breaks down peptide bonds following side chains with a lot of mass or fragrance, like those found in the amino acids phenylalanine as well as tyrosine. The substrate-binding site, also known as the specificity pocket, contains deep and features hydrophobic side chains.
A medium-sized globular protein called trypsin, also known as serine protease 1, serves as a pancreatic serine protease. This enzyme breaks down peptides on the C-terminal portion of the amino acid sequences lysine as well as arginine to hydrolyze bonds.
Therefore, the amino acid residue present in the specificity pocket allows trypsin to bind to peptides containing arg or lys will be "Asp".
To know more about peptides
https://brainly.com/question/14902522
#SPJ4
Identify all resonance forms of the enolate formed, and indicate whether or not a substantial amount of starting ketone will be present together with the enolate at equilibrium. (select all that apply)
At equilibrium, a significant quantity of starting ketone will be present with the enolate in the first case.
What is ketone?Ketones are substances produced by the liver. It is formed when there is insufficient insulin in the body to turn sugar into energy.
What happens in scenario two where the formation of possible enolate ions from the cyclohexan-1, 4-di.ketone by abstraction of acidic proton by suing sodium ethoxide base occurs?In this case a substantial amount of ketone will exist along side the enolate at equilibrium.
Learn more about ketones at;
https://brainly.com/question/27425066
#SPJ1
Oxidizing acids, such as nitric acid, can explode when mixed with what type of incompatible chemical? air water organic chemicals or materials compressed gases
Oxidizing acids, such as nitric acid, can explode when mixed with what type of incompatible chemicals like alcohol, or charcoal.
An oxidizing acid is a Brønsted acid that is a strong oxidizing agent. most Brønsted acids can act as oxidizing agents because the acidic proton can be reduced to hydrogen gas. a few acids include other structures that act as stronger oxidizing agents than hydrogen ions.
Oxidizing acids include concentrated perchloric acid, nitric acid, iodic acid, chromic acid, and the glass cleansing mixture of chromium trioxide and sulfuric acid.
learn more about acids here https://brainly.com/question/25148363
#SPJ4
Vanillin the flavoring agent in vanilla has a mass percent composition of 63.15 per h ,31.55per o. determine the empirical formula and molecular formula if molecular mass of vanillin is 152.15 g/mol
Empirical formula and Molecular formula:
Vanillin has the empirical formula C₈H₈O₃ and the molecular formula C₈H₈O₃, they both are same.
What is Vanillin?
Vanillin has the chemical formula C₈H₈O₃ and is classified as an organic compound. It is an aldehyde that is phenolic. Ether, hydroxyl, and aldehyde are some of their functional groups. It is the key ingredient in vanilla bean extract.C, H, and O are present in this compound,
Mass percent composition = Divide by their atomic mass
C = 63.15/12.0107 = 5.2578
H = 5.30/1.0079 = 5.2582
O = 31.55/16 = 1.9719
Thus, the ratio of
carbon : hydrogen : oxygen
5.257811784 : 5.258249499 : 1.97199825
division of all numbers by the smallest we get,
2.666235523 : 2.666457488 : 1
further dividing it by 3 we get,
7.998706568 : 7.999372463 : 3
thus the ratio becomes 8:8:3
Therefore, the empirical formula is C₈H₈O₃
Empirical formula mass = (12x8) + (1x8) + (16x3)
= 96 + 8 + 48
= 152
n = Molecular mass of Vanillin/ Empirical formula mass
= 152.15/152
= 1.0009
Since the n-value is near to 1 thus the molecular formula will also be the same.
Therefore the molecular formula = C₈H₈O₃
Note: Your question is incomplete, but most probably your full question was Vanillin the flavoring agent in vanilla has a mass percent composition of 63.15 per h ,31.55per o and 5.30%H. determine the empirical formula and molecular formula if molecular mass of vanillin is 152.15 g/mol
Learn more about the empirical formula and molecular formula here,
brainly.com/question/14425592
#SPJ4
He nitrogen cycle is one of the most important (and complex!) of the biogeochemical cycles. Why is nitrogen important?
Nitrogen is an essential part of proteins and nucleic acids (DNA).
Why is nitrogen important?All living things require nitrogen. It is a part of proteins, ATP, chlorophyll, DNA, and RNA. Given that it makes up a significant portion of the structures of biomolecules in living organisms, its synthesis and consumption in the biogeochemical cycle are of highest importance. Proteins are made up of amino acids (NH2 group).
The structural development of living species' genetic material (DNA, RNA) also involves nitrogen. It is a part of the nitrogenous bases, which together with other nucleotides create RNA and DNA.
Therefore, a nitrogen deficit can cause major structural issues for such an organism.
What happens if nitrogen cycle is disrupted?A number of undesirable consequences can result from the nitrogen cycle being disrupted. For instance, an abundance of nitrogen in aquatic systems leads to eutrophication. Acid rain can be caused by a rise in atmospheric nitrogen.
The majority of ecosystems can tolerate low nitrogen levels since the majority of nitrogen is not biologically accessible in nature. Ecosystems become out of balance when humans significantly increase the quantity of nitrogen that is accessible through fertilizers, fertilizer use, and other means.
Learn more about importance of nitrogen here:
https://brainly.com/question/14728440
#SPJ4
When testing the temperature of catalase, what would happen if you changed the temperature using the same tube with the same catalase and hydrogen oxide mixture?.
If we change the temperature using same tube with the same catalase and hydrogen oxide mixture, the hydrogen peroxide will break into oxygen and water molecule.
What is catalase?It is an enzyme which catalyses the decomposition reaction of hydrogen peroxide to water and oxygen.
Its function is to protect the oxidative damage by ROS
ROS is reactive Oxygen Species.
What is an enzyme?Enzymes are made of proteins which catalyses the biological reaction.
Effect of temperature on catalase:Increase of temperature results in the loosening of hydrogen bond and helps the catalase to decompose hydrogen peroxide.
The change in temperature using same tube with the same catalase and hydrogen oxide mixture, the hydrogen peroxide will break into oxygen and water molecule.
Learn more about Catalase on
https://brainly.com/question/1626108
#SPJ1
Treatment of DCS may involve: Select one: In-water recompression. Administration of pure oxygen. Recompression in a hyperbaric chamber. Both the second and third answers are correct.
Treatment of DCS may involve Recompression in a hyperbaric chamber.
Hence, Option (3) is correct answer.
What is DCS ?DCS is Decompression Sickness which is followed by recompression in a hyperbaric chamber. They prevent long term effects. It is also known as generalized barotrauma. It occur mostly in Scuba divers.
What are the Sign and Symptoms of DCS ?The sign and symptoms of DCS are
Skin itchShortness of breathA blotchy rashPain in joints or armDizzinessThus from the above conclusion we can say that Treatment of DCS may involve Recompression in a hyperbaric chamber.
Hence, Option (3) is correct answer.
Learn more about the DCS here: https://brainly.com/question/7747201
#SPJ4
You have a 150mL sample of an aqueous solution at 25C. It contains 15.2mg of an unknown nonelectrolyte compound. If the solution has an osmotic pressure of 8.44 torr, what is the molar mass of the compound
The molar mass of the compound:
If the solution has an osmotic pressure of 8.44 torr, then the molar mass of the unknown non-electrolyte is 223.14 g.
What is osmosis?
Osmosis is defined as the flow of solvent molecules through semi-permeable membrane.Osmotic pressure is the pressure applied to stop the flow of solvent molecules.It is a colligative property that means osmotic pressure depends on the number of solute particles .Therefore,
π[tex]V=inRT[/tex] ( for electrolytes)
Where, π= Osmotic pressure
i = Van 't Hoff factor
n= moles
R= Gaseous constant = 62.363577 L torr [tex]mol^{-1}K^{-1}[/tex]
T= Temperature
V= Volume of solution
Given:
T= 298K
V= 150 mL= 0.150 L
Given mass of unknown electrolyte= 15.2 mg = 15.2 x [tex]10^{-3}[/tex] g
Osmotic pressure= 8.44 torr
Molar mass= ?
For non-electrolytes:
πV = n RT
πV=[tex]\frac{m}{M}[/tex]RT
Calculations:
Putting the given values in the formula:
8.44 x 0.150 =15.2 x [tex]10^{-3}[/tex]/ M x 62.36 x 298
1.266 = 282.5/M
M = 282.5/1.266
M = 223.14 g
Therefore,
The molar mass of the unknown non-electrolyte is 223.14g.
Learn more about Osmotic pressure here,
https://brainly.com/question/13680877
#SPJ4
Which best describes the oxidizing agent in this reaction?
Cl2(aq) + 2Br–(aq) Right arrow. 2Cl–(aq) + Br2(aq)
Bromine (Br) is the oxidizing agent because it gains an electron.
Bromine (Br) is the oxidizing agent because it loses an electron.
Chlorine (Cl) is the oxidizing agent because it gains an electron.
Chlorine (Cl) is the oxidizing agent because it loses an electron.
For the reaction Cl₂(aq) + 2 Br⁻(aq) ⇒ 2Cl⁻(aq) + Br₂(aq), Chlorine (Cl) is the oxidizing agent because it gains an electron.
What is the oxidizing agent?In a redox reaction, the oxidizing agent is the one that gains electrons, causing the other element to oxidize.
Let's consider the following redox reaction.
Cl₂(aq) + 2 Br⁻(aq) ⇒ 2Cl⁻(aq) + Br₂(aq)
The corresponding half-reactions are:
Reduction: 2 e- + Cl₂(aq) ⇒ 2Cl⁻(aq)
Oxidation: 2 Br⁻(aq) ⇒ Br₂(aq) + 2 e-
Which best describes the oxidizing agent in this reaction?
Bromine (Br) is the oxidizing agent because it gains an electron. NO. Br is the reducing agent.Bromine (Br) is the oxidizing agent because it loses an electron. NO. Br is the reducing agent.Chlorine (Cl) is the oxidizing agent because it gains an electron. YES.Chlorine (Cl) is the oxidizing agent because it loses an electron. NO. Cl gains electrons.For the reaction Cl₂(aq) + 2 Br⁻(aq) ⇒ 2Cl⁻(aq) + Br₂(aq), Chlorine (Cl) is the oxidizing agent because it gains an electron.
Learn more about oxidizing agents here: https://brainly.com/question/9064518
#SPJ1
Answer:
C: Chlorine (Cl) is the oxidizing agent because it gains an electron.
Explanation:
4. A 0.51 kg solution contains 87 mg of potassium iodide. Calculate the W/W concentration
of this solution.
Taking into account the definition of percentage composition, the percent composition of potassium iodide in this sample is 0.017%.
Definition of percent compositionThe Percentage Composition is a measure of the amount of mass that an element occupies in a compound and indicates the percentage by mass of each element that is part of a compound.
To calculate the percentage of composition, it is necessary to know the mass of the element in a known mass of the compound.
Percentage Composition in this caseIn this case, you know that a 0.51 kg (or 510000 mg, being 1 kg= 1000000 mg) solution contains 87 mg of potassium iodide.
Dividing the mass amount of potassium iodide present in the compound by the mass of the sample and multiplying it by 100 to obtain a percentage value, the percentage composition of potassium iodide is obtained:
[tex]percentage composition of potassium iodide=\frac{87 mg}{510000 mg} x100[/tex]
percentage composition of potassium iodide= 0.017%
Finally, the percent composition of potassium iodide in this sample is 0.017%.
Learn more about percent composition:
brainly.com/question/24201923
brainly.com/question/9779410
brainly.com/question/17030163
#SPJ1
es endotermica o exotermica? naoh (ac) + hcl (ac) --> nacl (ac) + h2o (l) + 58.4 kj
Answer:
Exothermic
Explanation:
Reactions which are endothermic require heat. Reactions which are exothermic release heat as a product. Therefore, since heat is a product in this reaction (58.4 kJ), it is exothermic.
Remember,
reactants ---> products
Determine the number of moles in 50.0 grams of sodium. (the mass of one mole of sodium is 22.99 g.)
Answer:
2.17 moles
Explanation:
50 gm / 22.99 g / mole = 2.17 moles
Answer:
2.17
Explanation:
an acid accepts H and removes them from a solution, is a solution where the water molecules are intact
When placed in water, acids, bases, and salts dissociate (separate) into electrolytes (ions). Salts dissociate into a cation (that is not H+) and an anion (that is not OH-), whereas acids and bases dissociate into H+ and an anion. An acid separates into anions and hydrogen ions (H+). Strong acids produce a high concentration of H+ by dissociating every single one of their molecules . Water-based solutions,
Acid:
When a material or chemical is in solution, it releases hydrogen ions (H+), which are known as acids. All hydrogen ions (H+) and chloride ions (Cl-), which are normally bound together by ionic bonding, dissociate (separate) in water when exposed to a strong acid like hydrochloric acid (HCl). Only some ions disintegrate into hydrogen ions (H+) and bicarbonate ions (HCO3-) in a weak acid like carbonic acid (H2CO3), while others are still bound together by ionic bonds.
Define base?
A base is a chemical that, when in solution, emits hydroxyl ions -{OH). We can also define a base as a substance that releases hydroxyl ions (OH-), which mix with any hydrogen ions (H+) in the solution to generate water molecules (OH- + H+ = H2O).
Therefore, a substance that receives or accepts hydrogen ions (H+) that are already present in the solution qualifies as a base.
Because it totally dissociates into sodium ions (Na+) and hydroxyl ions (OH-) when placed in water, sodium hydroxide (NaOH), which is a strong base, is now liberated and dissolves in water.
c
for more information please visite:
https://brainly.com/question/15017356?referrer=search
#SPJ4
Half-life expressions can be derived from?
Different half-life expressions can be chemically derived from integrated rate laws.
What are integrated rate laws?In chemistry, the expression 'integrated rate laws' makes reference to the integration of different rate laws.
The constant rate refers to the specific amount of a given substrate or reactant that is used in a chemical reaction to produce a specific amount of product during such reactions.
The constant rate is very useful to determine the time required to generate a given amount of a product in a given chemical reaction (expressed per unit of time).
In conclusion, different half-life expressions can be chemically derived from integrated rate laws.
Learn more about integrated rate laws here:
https://brainly.com/question/16021790
#SPJ1
A teacher divides her class into four groups. She assigns
each group the task of measuring the temperature of a
given object three times. The teacher already knows that
the temperature of the object is 31°C.
Based on each group's results, which group makes the most precise
measurements of the object's temperature?
A. Group A: 31.0°C, 32.0°C, 30.0°C
B. Group B: 29.5°C, 33.0°C, 31.8°C
C. Group C: 32.1°C, 31.9°C, 31.8°C
D. Group D: 29.0°C, 35.0°C, 32.0°C
The group that makes the most precise measurements of the object's temperature is Group C : 32.1°C, 31.9°C, 31.8°C. That is option C.
What is a precise measurement?Precise measurement are those values that are gotten during a measurement which when compared are closest to the given constant value.
Precision refers to a value in decimal numbers after the whole number, and it does not relate with accuracy.
From the measurement gotten from the different groups, the results that are precise are the results of group C.
This is so because,
32.1-31 = 1.131.9-31 = 0.931.8- 31 = 0.8All the values gotten are in decimals as stated above. Therefore, the group that makes the most precise measurements of the object's temperature is Group C.
Learn more about accuracy here:
https://brainly.com/question/5792909
#SPJ1
__Pb(NO3)2 + __NaCI = __NaNO3 + __PbCI2
Answer:
Pb(NO3)2 + 2NaCl = 2NaNO3 + PbCl2