Please help me thank u sm

At a pressure of 12.4 atm and a temperature of 850 c, 8.2 liters of water can be created from 55 grams of oxygen gas and an excess of hydrogen.

first, we need the no.of moles of O2 = mass/molar mass of O2

                                                            = 55 g / 32 g/mol

                                                            = 1.72 mol

from the balanced equation of the reaction:

2H2 (g) + O2(g) → 2H2O(g)

we can see that the molar ratio between O2: H2O = 1: 2

So we can get the no.of moles of H2O = 2 * moles of O2

                                                                 = 2 * 1.72 mol

                                                                 = 3.44 mol

So by substitution by this value in the ideal gas formula:

PV = nRT

when P = 12.4 atm  & n H2O = 3.44 mol & R= 0.0821 & T = 85 + 273=358K

12.4 atm *V = 3.44 * 0.0821 * 358 = 8.15 L

∴ V ≈ 8.2 L

In the physical sciences, pressure is defined as the perpendicular force per unit area or stress at a point within a confined fluid. The pressure exerted on a floor by a 42-pound box with a bottom area of 84 square inches is equal to the force divided by the area over which it is exerted, or one-half pound per square inch.

Learn more about pressure here:

https://brainly.com/question/15170210

#SPJ4

A rough estimate of the excess pH of the solution is 1.74.

The answer to the question is that the concentration of NaOH is 0.2 M.

The question also states that the concentration of HNO3 is equal to that of NaOH, which is 0.2 M.

The volumes of sodium hydroxide and nitric acid that are provided to us are 50 mL and 60 mL, respectively. This implies that adding the two will result in the final volume.

= 50 plus 60 equals 110, or 0.11 liters

We know that there is a neutralizing reaction between NaOH and HNO3 based on theory. Then, as a means of answering the question, we record the aforementioned equation.

OH⁻ + H⁺ ---> H₂O

Finally, we apply logarithm to get our final answer

pH = - log [ H⁺ ]

pH = - log [0.01818]

pH = 1.74

Learn more about pH

brainly.com/question/10722909

#SPJ4

(C) moved faster and spread farther apart

An increase in temperature indicates the molecules in the liquid move faster and spread farther apart. The mercury thermometer was named after physicist Daniel Gabriel Fahrenheit in Amsterdam. Mercury thermometers are useful in many ways such as measuring body, liquid, and vapor temperature. The movement of the liquid in a thermometer shows changes in temperature. With an increase in temperature shows the molecules in the liquid are moving faster and the temperature is rising in the thermometer. The mercury expands to indicate a higher temperature up the tube which is marked in order to recognize a measurement of temperature. Mercury thermometers are rare today as most of them are toxic nowadays. A Mercury thermometer consists of a bulb containing mercury attached to a glass tube; the volume of mercury in the tube is much less than the volume in the bulb.

To know more about Mercury Thermometer click:

brainly.com/question/22237259

#SPJ4

The three types of elements are metals, non-metals as well as metalloids, there are placed in a periodic table.

In a periodic table, metals are placed in s-block and d-block. While non-metals as well as metalloids are placed in p-block. Metals are generally lustrous, malleable as well ductile in nature and are usually hard in nature while non-metals lack these properties. Metalloids are the elements whose chemical as well as physical properties lies between both metals and non-metals. Examples of metals are sodium and potassium. Examples of non-metals are carbon and phosphorus while examples of metalloids are silicon and germanium.

To learn more about elements check the link below:

https://brainly.com/question/25916838

#SPJ4

2 moles of Al₂O₃ will be produced when 4 moles of Al reacts in accordance with the above equation.

Stoichiometry refers to the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, 6.0 moles of Al reacts with 4.0 mol of oxygen gas to form Al₂O₃ as follows:

4Al + 30₂ → 2Al₂O₃

Based on the above equation, 4 moles of Al reacts to form 2 moles of aluminium oxide.

This means that 4 moles of aluminium will produce 4 × ²/4 = 2 moles of aluminium oxide.

Therefore, 2 moles of Al₂O₃ will be produced by 4 moles of aluminium.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

Iron has a BCC crystal structure, an atomic radius of 0. 124 nm, and an atomic weight of 55. 85 g/mol. its theoretical density is 7.9 g /cm³.

The molar mass of the iron = 55.85 g/mol

The atomic radius = 0.124 nm

the edge length is given as :

a = (4r) / √3

a = ( 4 × 0.124 × 10⁻⁷ cm ) / √3

a = 2.86 × 10⁻⁸ cm

The density is given below :

density = ( Z × M ) / Na × a³

density = ( 2 × 55.85 ) / (6.023 ×10²³) × ( 2.86 × 10⁻⁸ )

density = 7.9 g/cm³

Thus the theoretical density is 7.9 g/cm³.

To learn more about density here

https://brainly.com/question/14728915

#SPJ4

When Br2(l) boils at its normal boiling point, its entropy increases as it is positive.

The level of randomness found inside a substance's molecules is known as entropy.

The temperature at which atmospheric pressure and a liquid's vapor pressure are equal is known as the boiling point.

The amount of heat energy required to convert one mole of a substance from its liquid state into its gaseous state at constant temperature and pressure is referred to as the molar enthalpy of vaporization.

Entropy increases when a liquid is heated because the randomness between the molecules increases. As a result, entropy will rise.

To know more about entropy, refer

https://brainly.com/question/419265

#SPJ4

D. a) propanoyl chloride with (1) AlCl3 and (2) H2O b) Br2 / heat or light.

What is a reagent?

A reagent is a substance that is used in a chemical reaction to detect, measure, examine, or produce other substances. Reagents are used in many different industries, including pharmaceuticals, environmental testing, and materials science. Reagents can be in the form of a solid, liquid, or gas, and are generally made from a combination of elements, compounds, or mixtures.

a) The reaction of propanoyl chloride with AlCl3 and H2O can be represented as follows:

AlCl3 + H2O + Propanoyl Chloride → Al(OH)3 + HCl + Propanoic Acid

This reaction involves substitution of the chlorine atom in the propanoyl chloride molecule with a hydroxide ion from the AlCl3/H2O mixture.

b) Br2 / heat or light cannot be used to react with propanoyl chloride, as this reaction would require the breaking of the carbon-chlorine bond. This is not possible using Br2 / heat or light.

To know more about reagent,

https://brainly.com/question/26905271

#SPJ4

In literary classes, the three most popular types are verbal irony, dramatic irony, and situational irony. When a speaker or narrator says something that contradicts what they mean, what they intend, or what the context necessitates, this is called verbal irony.

One thing is expressed while another is meant in an ironic statement. For example, on a chilly, wet gray day, you would exclaim, "What a gorgeous day!" Alternatively, if you were suffering from a severe case of food sickness, you may respond, "Wow, I feel terrific today." "ffers points of view and ideas that are, at most, intriguing... However, it does not reach the truth." Ronagh and Souder are particularly concerned with scientific assertions that are not meant to be taken seriously.

Here,

The three most common varieties in literary studies are verbal irony, dramatic irony, and situational irony. Verbal irony occurs when a speaker or narrator says something that contradicts what they mean, what they intend, or what the context requires.

To know more about irony,

https://brainly.com/question/1695719

#SPJ4

Thermodynamic data is data that relates to the physical properties of a system related to temperature, pressure, and energy.

What is  Thermodynamic data?

Thermodynamic data is data that describes the physical properties of a material system in terms of temperature, pressure, and other thermodynamic variables. It is used to predict the behavior of materials in different conditions and to analyze processes such as heat transfer or chemical reactions. It is also used to design and optimize energy systems, such as engines and power plants.

The standard change in entropy when one mole of sodium nitrate is dissolved in water is:

ΔS° = S° (products) - S° (reactants)

ΔS° = (60.25 + 146.4) - 116.3 = 90.3 J/K•mol

The solubility of sodium nitrate will increase if the temperature of the system is increased.

To know more about thermodynamic data,

https://brainly.com/question/14265296

#SPJ4

Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 8.0 mol of CuS form when  8.0 mol CuSO[tex]_4[/tex]  reacts.

The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number. The stoichiometry represents the number of moles.

Na[tex]_2[/tex]S + CuSO[tex]_4[/tex]→ Na[tex]_2[/tex]SO[tex]4[/tex] + CuS

moles of  Na[tex]_2[/tex]S  =9.0 mol

moles of  CuSO[tex]_4[/tex]=8.0 mol

Since CuSO[tex]_4[/tex] is limiting reagent

moles of CuS=8.0 mol

Therefore, 8.0 mol of CuS form when  8.0 mol CuSO[tex]_4[/tex]  reacts.

To know more about mole, here:

brainly.com/question/15209553

#SPJ1

0Bh will be the hexadecimal value of AL (Aluminium)after these instructions execute

#D9DAD9 is the hex code for aluminum. (217, 218, 217) are the corresponding RGB values, indicating that it is made up of 33% red, 33% green, and 33% blue. Printers employ the CMYK color coding, which are C:1 M:0 Y:1 K:15. Aluminum has a brightness value of 85%, a saturation value of 0%, and a hue value of 120° on the HSV/HSB scale.Hexadecimal is the most practical number system to work with when dealing with long strings of numbers due to its compactness, aligned correspondence of 4 bits to 1 symbol, and freedom from the need to perform multiplication and addition when switching between bases (compare switching from binary to decimal and back).

complete question:What will be the hexadecimal value of AL after these instructions execute?

mov al, 0CFh

and al, 2Bh

learn more about Aluminium Refer:brainly.com/question/30228880

#SPJ4

Answer:

This is true. A seismograph measures the size of a volcano eruption by detecting the vibrations that are produced by the volcanic activity. The vibrations can then be converted into a numerical value that represents the magnitude of the eruption.

Explanation:

Atoms follow the octet rule, which makes them more stable in pairs.

The diatomic elements oxygen and nitrogen have a slightly more complex structure. There is a double bond between the two O atoms in the O₂ dot structure. And there is a triple bond between the two N atoms in the N₂ dot structure. Diatomic elements are elements that are never found alone in nature. It is always bound to another atom. The diatomic state of this atom is much more stable than its unbonded state.

Everything around us contains energy, even if it doesn't move. All molecules and atoms have spins and vibrations, but these are all internal forces.

All atoms try to reach the lowest potential. Atom has a state of lower energy, implying maximum stability under certain external conditions.

Learn more about octet rule visit:

brainly.com/question/865531

#SPJ4

Learn more about london dispersion force visit:

brainly.com/question/20514601

#SPJ4

Answer:

I don't know I am sorry

The total pressure in the flask is 1.320 times the total pressure.

Pressure is an important concept in chemistry, as it affects the physical behavior of gases and solids, and the rates at which reactions occur. Pressure is a measure of the force applied to an area, typically expressed in units of atmospheres (atm), or kilopascals (kPa).

Methane :

Mole fraction of methane = (231 mL / 2.00 L) = 0.1155

Partial pressure of methane = 0.1155 * Ptotal

Chlorine:

Mole fraction of chlorine = (907 mL / 2.00 L) = 0.4535

Partial pressure of chlorine = 0.4535 * Ptotal

Products:

Mole fraction of products = (75.9% com) = 0.759

Partial pressure of products = 0.759 * Ptotal

Total pressure = 0.1155*Ptotal + 0.4535*Ptotal + 0.759*Ptotal = 1.320*Ptotal

To learn more about pressure
https://brainly.com/question/25736513
#SPJ4

In a container, the pressure of hydrogen sulfide gas is 267.4 torr.

The force of all gas particle/wall collisions divided by the area of the wall is defined as pressure (P): Pressure is one of the primary observable quantities of this phase of matter; it is exerted by all gases. The amount of force exerted per area is described as pressure. Pressure is defined as force divided by area. The pressure from snow on a roof, for example, would equal the weight of the snow divided by the area of the roof. In chemistry, pressure is often generated by gases. When you blow up a balloon, you fill it with gas.

Here,

pressure of hydrogen sulfide gas= 35650 Pa

1 torr=133.33 Pa

=35650/133.33

=267.38 torr

The pressure of hydrogen sulfide gas in a container is 267.4 torr.

To know more about pressure,

https://brainly.com/question/14760196

#SPJ4

Cobalt-60 has a half-life of 5.20 years, which means that half the sample will be present after that time.

The chemical element cobalt has the atomic number 27 and the symbol Co. It is a naturally occurring hard, glossy, silver-gray metal that is found in rocks and soils. Cobalt is magnetic when it is pure, and it can be used to make alloys, magnets, and colours. Additionally, it is employed in the manufacture of batteries, catalysis, and pharmaceuticals. The production of vitamins and proteins depends on cobalt, a trace mineral that is crucial for maintaining human health.

After 7.55 years, about 0.78 of the original 1.000 mg sample will remain.
Therefore, 0.78 x 1.000 mg = 0.780 mg will remain after 7.55 years.

To learn more about Cobalt
https://brainly.com/question/15609461
#SPJ4

Based on the provided information, the number of grams of carbon should you end with is 5g.

If you start with 5 grams of carbon on the reactant side, the grams of carbon you should end with 5g based on the law of conservation of mass. The law of conservation of mass, also known as principle of mass conservation postulate that for any system closed to all transfers of matter and energy, the system mass must remain constant over time, as the mass of system cannot change, so quantity can neither be added nor be removed. Hence, the law states that mass is neither created nor destroyed in a chemical reaction. Hence, the grams of reactants that one starts with, one will end with the same amount. Chemicals recombine to give a different compound in the product, the mass is still always conserved.

Note: The question is incomplete. The complete question probably is: If you start with 5 grams of carbon on the reactant side, how many grams of carbon should you end with?

Learn more about Law of conservation of mass:

https://brainly.com/question/19038178

#SPJ4

It saves energy, minimizes air and water pollution, cuts greenhouse gas emissions, and protects natural resources. Stanford recycled, composted, and otherwise decreased its trash by 62% and reduced landfill by 35%.

It saves energy, minimizes air and water pollution, cuts greenhouse gas emissions, and protects natural resources. Stanford recycled, composted, and otherwise decreased its trash by 62% and reduced landfill by 35%. The process of transforming waste resources into new materials and things is known as recycling. This notion frequently includes the recovery of energy from waste materials. The capacity of a material to regain the attributes it had in its original form determines its recyclability. Recycling is the collection and processing of items that would otherwise be discarded as waste in order to create new goods. Recycling may help your town, economy, and environment.

Here,

It saves energy, decreases air and water pollution, lowers greenhouse gas emissions, and protects natural resources. Stanford recycled, composted, and avoided landfill by 62% and 35%, respectively.

To know more about recycle,

https://brainly.com/question/26807121

#SPJ4

The Correct answer is 50 Meters,Displacement is defined to be the change in position of an object.

Displacement is the term used to describe the shift in an object's location or the shortest path/length between two places. With such a magnitude and orientation, it is a vector quantity.

Displacement=Δx=x f −x 0

The student's path fortunately consisted of straight lines and right angles. Therefore we can use the pythagorean theorem to find the distance between where the student's path started and stopped.

A2+B2= C2.

We Give

meters east in for A, 40.

meters north for B  60 .

Distance =40+60+20=110m

Displacement OC= Root of (40 ²+30 ²)

                            = 50 m

That's the length of the distance between where the student started and where the student ended up.

A2 plus B2 equals C2. We plug 30. meters east in for A, and 40. meters north for B. 30. meters squared plus 40. meters squared equals 2500 meters2. Then we take the square root of that number and get 50. meters.

To know more about Displacement refer to :

https://brainly.com/question/321442

#SPJ1

The empirical formula of this compound is Ca3(PO4)2.

What is an Empirical formula?

An empirical formula is a type of chemical formula that shows the simplest ratio of atoms in a molecule, rather than the total number of atoms. It is the simplest possible chemical formula that shows the relative numbers of each type of atom in a molecule.

The molecular formula is Ca3(PO4)2•H2O, which indicates that the compound is composed of three calcium atoms, two phosphate atoms, and two water molecules. The molar mass of this compound is 1004 g/mol, which is two times the molar mass of the empirical formula (502 g/mol). Therefore, the molecular formula of this compound is Ca3(PO4)2•H2O.

To know more about empirical formula,

https://brainly.com/question/13058832

#SPJ4

A certain solution contains 4.3 grams of salt per liter. the  salt is there in 11 liters of the solution is 47.3 grams.

The solution contains = 4.3 grams salt per liters

in one liters the solution contains = 4.3 grams of the salt.

the salt in the 11 liters = ?

so, in one liter in contains = 4.3 grams

in 11 liters it will contains = 4.3 × 11

                                         = 47.3 g

the round off answer to the solution is 47.3 g.

Thus the amount of the salt in the 11 Liters of the solution is the 47.3 g.

To learn more about solutions  here

https://brainly.com/question/10432855

#SPJ4

108°C is the final temperature of the water after absorption of 1680 Joules of heat energy.

Temperature is a physical quantity used to measure the average kinetic energy of molecules in matter. This is measured with a thermometer or other device that measures the average kinetic energy of the molecules within the substance. The terms Celsius (°C), Fahrenheit (°F), or Kelvin are commonly used to describe temperature (K). Temperature can affect the physical state of matter.

By rearranging the equation gives:

ΔT = q/mc

Plugging in the given values,

ΔT = 1680/ (80.0 g × 4.184 J/g·C)

= 98°C.

Since the initial temperature was 10°C, the final temperature is:

ΔT = T₂ - T₁

98°C = T₂ - 10

T₂ = 108°C

To learn more about Temperature

https://brainly.com/question/25384702

#SPJ4

This is because intermolecular forces have a greater effect in a solution when bonding is present than in a vacuum when bonding is not present.

The attracting and repellent forces that develop between the molecules of a substance are known as intermolecular forces or IMF for short. Individual molecules of a substance interact with one another through the mediation of these forces.

Most of the physical and chemical features of matter are caused by intermolecular forces.

An intermolecular force is an attractive force that develops between the protons or positive parts of one molecule and the electrons or negative parts of another molecule. This force affects a substance's many physical and chemical properties. The strength of a material's intermolecular forces directly relates to the boiling point of that substance; the stronger the intermolecular forces, the higher the boiling point.

Learn more about Intermolecular forces  here:

https://brainly.com/question/9007693

#SPJ4

PBr₃ and Carbon Tetraiodide is a covalent compound. Whereas, KBr and Iron (III) Oxide is an ionic compound.  

Covalent compounds and molecular compounds are those compound where two non-metals, or a non-metal are bonded to each other through the sharing pair of electrons.

PBr₃ are covalent because phosphorous is in the column 3 in periodic system and it has three valence electrons in its outer shell. Therefore, in case of Carbon Tetraiodide carbon and iodide both are non-metals that why they are covalent compounds.

KBr and Iron (III) Oxide both are Iron (III) Oxide because they are formed by the interaction between a metal and non-metal. They will transfer the electrons from positively to negatively charged atoms.

To know more about covalent compound here

https://brainly.com/question/11632372

#SPJ4

Geometry for the complex ion [Co(en)(H2O)4]2+ that are possible is : Octahedral.

A compound with six atoms or groups of atoms or ligands grouped symmetrically around a central atom and defining the vertices of the octahedron represents the shape of an octahedron in chemistry and is known as an octahedral molecular geometry (also known as a square bipyramid).

The prefix is octa because the octahedron has eight faces. Octahedral bond angle values between 90° and 180° are what determine the octahedral shape. The angles between each of the four atoms that make up the square bases of the two pyramids of the octahedral structure and one of the apex atoms are both 90 degrees.

To know more about octahedral geometry , refer

https://brainly.com/question/29031085

#SPJ4

The new volume in litres is 13.29 L.

Given,

Temperature 1 (T₁) = 298 K

Volume 1 (V₁) = 15 L

Temperature 2 (T₂) = 383 K

Pressure 1 (P₁) = 3.36 atm

Pressure 2 (P₂) = 4. atm

By Ideal Gas Equation,

P₁V₁/T₁ = P₂V₂/T₂

⇒ (3.36*15)/298 = (4.90*V₂)/383

⇒50.4/298 = 4.90V₂/383

⇒ (50.4*383) / (298*4.90) = V₂

⇒ 19303.2/1460.2 = V₂

⇒13.29 L = V₂

New Volume will be 13.29 L.

Ideal gas law is a precise approximation of the behavioral of several gases under various situations in thermodynamics. The Ideal Gas Equation is a mathematical formula that combines empirical laws such as Charle's law, Boyle's law, Gay-law, Lussac's and Avogadro's law.

The equation characterizing the states of hypothetical gases stated mathematically by combinations of empirical or physical constants is known as the Ideal Gas Equation. It's also known as the universal gas equation. It is defined as follows:

"The ideal gas law seems to be the equation of state for a fictitious perfect gas. It is a decent approximation of the behavioral of various gases under numerous situations, while it has significant limitations".

To know more about the Ideal gas law, here

https://brainly.com/question/28257995

#SPJ4

When a beaker of ethanoic acid is placed in the refrigerator and mix it with sodium carbonate, its temperature drops down and endothermic reaction take place.

[tex]2CH_{3} COOH + NaCO_{3}[/tex]    ⇒ [tex]CH_{3}COONa + NaHCO_{3}[/tex]

This chemical reaction is a reversible reaction.

Ethanoic acid and sodium carbonate combine to form an endothermic reaction that results in fizzing as carbon dioxide is released and heat is lost to the environment, making the reaction vessel feel chilly to the touch.

The difference between adding sodium carbonate to the solution and refrigerating ethanoic acid is that no new substance is created in the former. When the substance is taken out of the refrigerator, it is still ethanoic acid. New chemicals are created in the latter scenario. Because of a chemical process, the material is no longer ethanoic acid.

Learn more about endothermic reaction visit:

brainly.com/question/23184814

#SPJ4