Pls help I need it ASAP!!!

Answer:

Physical

Explanation:

Because thats the answer

Answer:

It's not A or D

Explanation:

I was looking all over for answers and I saw A and D, so I used A. It was wrong, so I retook it and used D. Wrong. Your answer is either B or C. I am sorry I couldn't help more.

Answer:

it is b same question was on my quiz

Explanation:

Answer:

Cells are the fundamental units of life ' the bricks from which all your. which are built of your cells, will become compromised, and you can. of these new cells from the nutrients you get in your food is one way. Let's take a look inside one of your cells and see what the nutrients really do.

Explanation:

Answer:

Option B. Sink to the bottom of the container.

Explanation:

From the question given above, the following data were obtained:

Density of ice = 0.92 g/cm³

Density of rubbing alcohol = 0.80 g/cm³

From the density of both substance given, we can see clearly that the ice has a higher density when compared with the rubbing alcohol.

Thus, If an ice cube is placed in a container of rubbing alcohol, the ice cube will not float rather, it will sink to the bottom of the container because the ice has a higher density than the rubbing alcohol.

Answer:

what?????????i don't see a question

Answer:

Yes

Explanation:

Answer:

genetics

hope this helps :)

Explanation:

Answer:

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\[/tex]

From the question

mass = 180 g

density = 6 g/cm³

We have

[tex]volume = \frac{180}{6} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

The percent error is 0.023%.

Explanation:

Pre-weighed of a quarter is 5.6026 g.

The weight that the  student obtains for the same quarter is 5.6013 g.

We need to find the percent error in the students reading. It is given by the formula as follows :

[tex]\%=\dfrac{|\text{original value-calculated value}|}{\text{original value}}\times 100[/tex]

Putting all the values, we get :

[tex]\%=\dfrac{5.6026 -5.6013 }{5.6026 }\times 100\\\\\%=0.023\%[/tex]

So, the percent error is 0.023%.

Explanation:

The lack of a control group

Answer:

Positive

Nucleus

Answer:

A single distillation cycle is enough to separate the mixture. ... Simple distillation is the method used to separate substances in mixtures with significantly different boiling points, while fractional distillation is used for mixtures containing chemicals with boiling points close to each other.

Explanation:

Answer:They indicate the number of molecules of each substance

Explanation:

When we write chemical reaction equations, we usually put a number before the symbol of each reactant.

These coefficient shows the number of molecules of that specie that is involved in the balanced reaction equation for the reaction.

These coefficients are important because they are used in carrying out stoichiometric calculations.

Percent abundance is the percentage of all the different isotopes of an element and is used to calculate the average atomic mass. For example 99.98% of all Hydrogen in the universe is [tex]^1H[/tex] meaning hydrogen with 1 proton and 0 neutrons while the remaining 0.02% is  [tex]^2H[/tex] meaning that [tex]^1H[/tex] is the most abundant by  percent.

Answer:

According to google, "About five million million hydrogen atoms could fit. Some factors would affect that number like the area of the head and the size of atoms (as well as attractions between atoms). Some atoms are larger than others." Is this accurate? I'm not sure. Good luck! :)

Answer:

8

Explanation:

Answer: A

Explanation:

The charge-to-mass ratio of electrons is always the same constant, no matter which substances are used in the cathode ray tube.

Explanation:

So, from this, we can conclude that the charge-to-mass ratio of electrons is always the same constant, no matter which substances are used in the cathode ray tube describes Thomson's conclusion that electrons are present in all atoms.

Learn more about J.J. Thomson's model of atom here:

brainly.com/question/2437167?referrer=searchResults

brainly.com/question/1874920?referrer=searchResults

Answer:

in mountainous regions

Explanation:

The rivers usually begins in mountainous regions. A river's source is typically located in a high area, such a mountain or a hill. A river may have several sources. Some rivers start where an underground natural spring discharges water.

A mountain is an elevated area of the crust of the Earth, typically with steep sides that reveal a substantial amount of bedrock that has been exposed.

Although definitions vary, a mountain is often taller than a hill, rising normally at least 300 meters above the surrounding terrain, and differs from a plateau in having a constrained peak region.

Every river has a beginning place where the water flow starts. We refer to this source as a headwater. Some rivers have their beginnings in hills or mountains, where rainwater or snowmelt gathers and creates little channels.

It is possible for the headwater to originate from mountain snowmelt or rainfall, but it is also possible for it to bubble up from the ground or develop at the edge of a lake or big pond.

Thus, option C is correct.

To learn more about mountain, follow the link;

https://brainly.com/question/10690247

#SPJ6

Answer:

3.5: Ionic Compounds- Formulas and Names

Last updatedAug 25, 2020

3.4: An Atomic-Level Perspective of Elements and Compounds

3.6: Molecular Compounds- Formulas and Names

picture_as_pdf

Readability

Donate

6.9: Binary Ionic Compounds and Their Properties

6.18: Ionic Compounds Containing Polyatomic Ions

Learning Objectives

Derive names for common types of inorganic compounds using a systematic approach

Nomenclature, a collection of rules for naming things, is important in science and in many other situations. This module describes an approach that is used to name simple ionic and molecular compounds, such as NaCl, CaCO3, and N2O4. The simplest of these are binary compounds, those containing only two elements, but we will also consider how to name ionic compounds containing polyatomic ions, and one specific, very important class of compounds known as acids (subsequent chapters in this text will focus on these compounds in great detail). We will limit our attention here to inorganic compounds, compounds that are composed principally of elements other than carbon, and will follow the nomenclature guidelines proposed by IUPAC. The rules for organic compounds, in which carbon is the principle element, will be treated in a later chapter on organic chemistry.

Ionic Compounds

To name an inorganic compound, we need to consider the answers to several questions. First, is the compound ionic or molecular? If the compound is ionic, does the metal form ions of only one type (fixed charge) or more than one type (variable charge)? Are the ions monatomic or polyatomic? If the compound is molecular, does it contain hydrogen? If so, does it also contain oxygen? From the answers we derive, we place the compound in an appropriate category and then name it accordingly.

Compounds Containing Only Monatomic Ions

The name of a binary compound containing monatomic ions consists of the name of the cation (the name of the metal) followed by the name of the anion (the name of the nonmetallic element with its ending replaced by the suffix –ide). Some examples are given in Table  3.5.2 .

Table  3.5.1 : Names of Some Ionic Compounds

NaCl, sodium chloride Na2O, sodium oxide

KBr, potassium bromide CdS, cadmium sulfide

CaI2, calcium iodide Mg3N2, magnesium nitride

CsF, cesium fluoride Ca3P2, calcium phosphide

LiCl, lithium chloride Al4C3, aluminum carbide

Compounds Containing Polyatomic Ions

Compounds containing polyatomic ions are named similarly to those containing only monatomic ions, except there is no need to change to an –ide ending, since the suffix is already present in the name of the anion. Examples are shown in Table  3.5.2 .

Table  3.5.2 : Names of Some Polyatomic Ionic Compounds

KC2H3O2, potassium acetate (NH4)Cl, ammonium chloride

NaHCO3, sodium bicarbonate CaSO4, calcium sulfate

Al2(CO3)3, aluminum carbonate Mg3(PO4)2, magnesium phosphate

Ionic Compounds in Your Cabinets

Ionic Compound Use

NaCl, sodium chloride ordinary table salt

KI, potassium iodide added to “iodized” salt for thyroid health

NaF, sodium fluoride ingredient in toothpaste

NaHCO3, sodium bicarbonate baking soda; used in cooking (and as antacid)

Na2CO3, sodium carbonate washing soda; used in cleaning agents

NaOCl, sodium hypochlorite active ingredient in household bleach

CaCO3 calcium carbonate ingredient in antacids

Mg(OH)2, magnesium hydroxide ingredient in antacids

Al(OH)3, aluminum hydroxide ingredient in antacids

NaOH, sodium hydroxide lye; used as drain cleaner

K3PO4, potassium phosphate food additive (many purposes)

MgSO4, magnesium sulfate added to purified water

Na2HPO4, sodium hydrogen phosphate anti-caking agent; used in powdered products

Na2SO3, sodium sulfite preservative

Table  3.5.3 : Names of Some Transition Metal Ionic Compounds

Transition Metal Ionic Compound Name

FeCl3 iron(III) chloride

Hg2O mercury(I) oxide

HgO mercury(II) oxide

Cu3(PO4)2 copper(II) phosphate

Naming Ionic Compounds

Name the following ionic compounds, which contain a metal that can have more than one ionic charge:

Fe2S3

CuSe

GaN

CrCl3

Ti2(SO4)3

Solution

The anions in these compounds have a fixed negative charge (S2−, Se2− , N3−, Cl−, and  SO2−4 ), and the compounds must be neutral. Because the total number of positive charges in each compound must equal the total number of negative charges, the positive ions must be Fe3+, Cu2+, Ga3+, Cr4+, and Ti3+. These charges are used in the names of the metal ions:

iron(III) sulfide

copper(II) selenide

gallium(III) nitride

chromium(III) chloride

titanium(III) sulfate

Exercise  3.5.1  

Write the formulas of the following ionic compounds:

(a) chromium(III) phosphide

(b) mercury(II) sulfide

(c) manganese(II) phosphate

(d) copper(I) oxide

(e) chromium(VI) fluoride

Answer

(a) CrP; (b) HgS; (c) Mn3(PO4)2; (d) Cu2O; (e) CrF6

Explanation:

The given compound is francium sulfate.

Explanation:

While naming ionic compounds :

Given

The molecule formula of a compound[tex]Fr_2SO_4[/tex]:

To find:

The name of the given compound formula

Solution:

Cation in formula = [tex]Fr^+[/tex] = Francium cation

Anion in the formula= [tex]SO_4^{-2}[/tex] = Sulfate anion

So, the name of the given compound is francium sulfate.

Learn more about the naming of compounds here:

brainly.com/question/863443?referrer=searchResults

brainly.com/question/8968140?referrer=searchResults

Answer:

don't you have any options

Answer:

The emitted light can be observed as a series of colored lines with dark spaces in between; this series of colored lines is called a line or atomic spectra.

Explanation:

Answer:

The answer to this question is C; ultraviolet radiation

Explanation:

The the reason for this is because it carries more energy per photon than visible light does. Light travels at a speed of 299,792 kilometers per second (about 186,282 miles per second).

Answer:

Flammability

Explanation:

Flammability is a chemical property. So, this means that it must react with a substance.

Color, shape, and volume are physical traits. This means that no other matter needs to be included in order for this trait to be so.

Answer:

false

Explanation:

Answer:

2614.423226

Explanation:

Answer:

b

Explanation:

now explanation because that is answer

Answer:

great job!!

Explanation:

ALL IS CORRECT :)