Question 20
Points 3
The height of a lighthouse is 98 meters and the distance between the top of the lighthouse and boat is 125 meters. Find the distance
between the bottom of the lighthouse and the boat.
O 125 m
O 77.6 m

Answer:

[tex]y - 17 = -\frac{11}{6} (x+5)[/tex]

Step-by-step explanation:

Remember that the slope-point form of a line is:

[tex]y - y_{1} = m(x-x_{1})[/tex], where [tex](x_{1}, y_{1} )[/tex] the point on the line, and [tex]m[/tex] is the slope. All these values are given in the question, so we just go ahead and plug them in to get:

[tex]y - 17 = -\frac{11}{6} (x+5)[/tex]

Hope this helps

If we have two series, ∑an and ∑bn, with positive terms and it is known that ∑an is divergent, and if an > bn for all n, then we can conclude that ∑bn is also divergent.

This can be understood by considering the comparison test for series convergence. The comparison test states that if 0 ≤ bn ≤ an for all n, and if ∑an is divergent, then ∑bn must also be divergent.

In our case, since an > bn for all n, it follows that 0 ≤ bn ≤ an. Therefore, by the comparison test, if ∑an is divergent, then ∑bn must also be divergent.

Intuitively, if the terms of ∑bn are smaller than the terms of ∑an, and ∑an diverges (i.e., its terms do not approach ), then ∑bn must also diverge because its terms are even smaller.

Therefore, if ∑an is known to be divergent and an > bn for all n, we can conclude that ∑bn is also divergent.

learn more about "divergent":- https://brainly.com/question/15415793

#SPJ11

We can calculate the finance charge for this month by using the formula: Finance charge = Average daily balance x APR x (number of days in billing cycle / 365)Step-by-step solution:The previous balance on your credit card was $680. You made purchases of $140 and a payment of $70. So, your new balance is:

Previous balance + purchases - payment = $680 + $140 - $70 = $750Next, we need to calculate the average daily balance:Average daily balance = (680 x number of days before payment) + (750 x number of days after payment) / number of days in billing cycleAssuming a 30-day billing cycle, the number of days before payment is 10 (from the start of the billing cycle to the payment date), and the number of days after payment is 20 (from the payment date to the end of the billing cycle).Average daily balance = (680 x 10) + (750 x 20) / 30 = $730Finally, we can use the formula to calculate the finance charge:Finance charge = Average daily balance x APR x (number of days in billing cycle / 365)Finance charge = $730 x 0.21 x (30 / 365)Finance charge = $11.92 (rounded to the nearest cent)Therefore, the finance charge for this month is $11.92.

To know more about finance charge,visit:

https://brainly.com/question/12459778

#SPJ11

The finance charge for this month is $23.26 (rounded to the nearest cent). We need to first calculate the new balance and the average daily balance.

To find the finance charge for this month, we need to first calculate the new balance and the average daily balance. Here are the steps to do so:

Step 1: Calculate the new balance.

New Balance = Previous Balance + Purchases - Payments

New Balance = $680 + $140 - $70

New Balance = $750

Step 2: Calculate the average daily balance.

Average Daily Balance = (Previous Balance x Number of days) + (New Balance x Number of days) ÷ Number of days in the billing cycle

Assuming a 30-day billing cycle, we get:

Average Daily Balance = ($680 x 30) + ($750 x 30) ÷ 30

Average Daily Balance = $40,200 ÷ 30

Average Daily Balance = $1,340

Step 3: Calculate the finance charge.

Finance Charge = Average Daily Balance x Daily Periodic Rate x Number of days in the billing cycle

We know that the APR is 21%, which means the Daily Periodic Rate is:

Daily Periodic Rate = APR ÷ Number of days in the year

Daily Periodic Rate = 21% ÷ 365

Daily Periodic Rate = 0.00057534

So, the finance charge is:

Finance Charge = $1,340 x 0.00057534 x 30

Finance Charge = $23.26

Therefore, the finance charge for this month is $23.26 (rounded to the nearest cent).

To know more about Daily Periodic Rate, visit:

https://brainly.com/question/7100136

#SPJ11

The solution to the initial value problem using Laplace transforms is x(t) = (-1/2)e^(3t)cos(2t) + (1/2)e^(3t)sin(2t).

To solve the given initial value problem using Laplace transforms, we'll apply the Laplace transform to both sides of the differential equation and solve for the Laplace transform of x(t). Let's denote the Laplace transform of x(t) as X(s).

Taking the Laplace transform of the differential equation, we have:

s^2X(s) - sx(0) - x'(0) - 6(sX(s) - x(0)) + 13X(s) = 1

Since x(0) = 0 and x'(0) = 0, the equation simplifies to:

s^2X(s) - 6sX(s) + 13X(s) = 1

Now, solving for X(s), we have:

X(s)(s^2 - 6s + 13) = 1

X(s) = 1 / (s^2 - 6s + 13)

To find the inverse Laplace transform of X(s), we need to factor the denominator of X(s):

s^2 - 6s + 13 = (s - 3)^2 + 4

The roots of this quadratic equation are complex: s = 3 ± 2i.

Using partial fraction decomposition, we can write X(s) as:

X(s) = A / (s - (3 - 2i)) + B / (s - (3 + 2i))

Multiplying both sides by the common denominator and simplifying, we get:

1 = A(s - (3 + 2i)) + B(s - (3 - 2i))

Now, we can solve for A and B by comparing coefficients:

1 = (A + B)s - (3A + 3B) + (-2Ai + 2Bi)

Comparing real and imaginary parts separately, we have:

Real part: 0 = (A + B)s - (3A + 3B)
Imaginary part: 1 = (-2A + 2B)i

From the real part equation, we get A + B = 0, which implies A = -B.

From the imaginary part equation, we get -2A + 2B = 1, which implies B = 1/2 and A = -1/2.

Therefore, the partial fraction decomposition becomes:

X(s) = (-1/2) / (s - (3 - 2i)) + (1/2) / (s - (3 + 2i))

Taking the inverse Laplace transform of X(s), we can find x(t):

x(t) = (-1/2)e^((3 - 2i)t) + (1/2)e^((3 + 2i)t)

Using Euler's formula e^(it) = cos(t) + i*sin(t), we can write x(t) as:

x(t) = (-1/2)e^(3t)cos(2t) + (1/2)e^(3t)sin(2t)

To learn more about Laplace transforms go to:

https://brainly.com/question/31040475

#SPJ11

The coefficient matrix for the system is

[ 2  2 ]

[-4 -2 ]

The characteristic equation is

det(A - lambda*I) = 0

where A is the coefficient matrix, I is the identity matrix, and lambda is the eigenvalue. Substituting the values of A and I gives

| 2-lambda    2      |

|-4           -2-lambda| = 0

Expanding the determinant gives

(2-lambda)(-2-lambda) + 8 = 0

Simplifying, we get

lambda^2 - 6lambda + 12 = 0

Using the quadratic formula, we find that the eigenvalues are

lambda1 = 3 + i*sqrt(3)

lambda2 = 3 - i*sqrt(3)

To find the eigenvectors, we need to solve the system

(A - lambda*I)*v = 0

where v is the eigenvector. For lambda1, we have

[ -sqrt(3)   2      ][v1]   [0]

[ -4          -5-sqrt(3)][v2] = [0]

Solving this system, we get the eigenvector

v1 = 2 + sqrt(3)

v2 = 1

For lambda2, we have

[ sqrt(3)   2     ][v1]   [0]

[ -4         -5+sqrt(3)][v2] = [0]

Solving this system, we get the eigenvector

v1 = 2 - sqrt(3)

v2 = 1

Learn more about matrix  here:

https://brainly.com/question/29132693

#SPJ11

Answer:

A) 33 ft

Step-by-step explanation:

With two angles and one side given, we should use the Law of Sines:

[tex]\displaystyle \frac{\sin A}{a}=\frac{\sin B}{b}=\frac{\sin C}{c}\\\\\frac{\sin 48^\circ}{\overline{BC}}=\frac{\sin 130^\circ}{34}\\\\34\sin48^\circ=\overline{BC}\sin130^\circ\\\\\overline{BC}=\frac{34\sin48^\circ}{\sin130^\circ}\\\\\overline{BC}\approx 33[/tex]

The inverse Laplace transform of Y(s), we get:

y(t) = tsin(5t) + 3/5(1-e^(3-5t))*u(t-3)

Taking the Laplace transform of the differential equation y''+25y=g(t), where y(0)=0 and y'(0)=0, we get:

s^2Y(s)-sy(0)-y'(0) + 25Y(s) = G(s)

s^2Y(s) + 25Y(s) = G(s)

Y(s) = G(s) / (s^2 + 25)

Substituting the given piecewise function for g(t), we get:

G(s) = L{g(t)} = L{t} + L{3u(t-3)}

G(s) = 1/s^2 + 3e^(-3s)/s

Substituting G(s) into the Laplace transform of y(t), we get:

Y(s) = [1/s^2 + 3e^(-3s)/s] / (s^2 + 25)

Y(s) = (1/s^2) / (s^2 + 25) + (3e^(-3s)/s) / (s^2 + 25)

Know more about Laplace transform here:

https://brainly.com/question/31481915

#SPJ11

To determine the number of seconds it took for the cannonball to hit the ground, we need to look for the point in the table where the height is equal to zero.

From the given data, we can see that at 5 seconds, the height is 0 feet. Therefore, the cannonball hit the ground 5 seconds after it was dropped.

So the answer is: 5

Learn more about feet here:

https://brainly.com/question/15658113

#SPJ11

The length of the pathway that runs along the diagonal of the play area is approximately 36 meters.

Given: Length of the rectangular play area = 30 meters Width of the rectangular play area = 20 meters To find: The length of a pathway that runs along the diagonal of the play area.

Formula to find diagonal of rectangle is as follows:d = √(l² + w²)Where,d = diagonal of the rectangular play areal = length of the rectangular play areaw = width of the rectangular play area.

Substituting the given values in the above formula,d = √(30² + 20²)d = √(900 + 400)d = √1300d = 36.0555 m (approx)

Therefore, the length of the pathway that runs along the diagonal of the play area is approximately 36 meters (rounded to the nearest meter).

Note: Here, we use the square root of 1300 in a calculator to find the exact value of the diagonal and rounded it off to the nearest meter.

To know more about diagonal , visit:

https://brainly.com/question/28592115

#SPJ11

The length of the pathway along the diagonal of the play area is approximately 36 meters.

The length of the pathway that runs along the diagonal of the play area can be found using the Pythagorean theorem. The Pythagorean theorem states that in a right triangle, the square of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the other two sides. In this case, the length is the hypotenuse, while the 30-meter side and the 20-meter side are the other two sides.

Applying the Pythagorean theorem, we have:

a2 + b2 = c2

where a = 30 meters and b = 20 meters. Solving for c, the length of the pathway:

c2 = a2 + b2

c2 = 302 + 202

c2 = 900 + 400

c2 = 1300

Next, we take the square root of both sides to find the length of the pathway:

c = √1300

c ≈ √1296

c ≈ 36 meters

https://brainly.com/question/32934618

#SPJ12

a)  The posterior density p(θ | n) is p(θ | n) ∝ L(θ | n) * f(θ). b) the posterior distribution of θ will assign negligible probability mass around θ = 0.99 for large sample sizes. c) The posterior distribution would be more informative and accurately capture the true value of θ.

(a) To determine the posterior density of θ given n heads, we can use Bayes' theorem:

Posterior density ∝ Likelihood × Prior

Let's denote the posterior density as p(θ | n), the likelihood as L(θ | n), and the prior as f(θ).

The likelihood L(θ | n) is the probability of observing n heads given θ. In a coin toss, the probability of getting a head on a single toss is θ, so the likelihood is given by the binomial distribution:

L(θ | n) = (n choose n) * θ^n * (1-θ)^(n-n)

The prior density f(θ) is given as a Uniform[0.4, 0.6] distribution. Since it is a continuous uniform distribution, the prior density is a constant within the interval [0.4, 0.6] and zero outside this interval.

Now, we can calculate the posterior density p(θ | n):

p(θ | n) ∝ L(θ | n) * f(θ)

The constant of proportionality can be obtained by integrating the posterior density over the entire range of θ and dividing by it to make it a proper probability density.

(b) Suppose the true value of θ is 0.99. In this case, the likelihood L(θ | n) will decrease rapidly as n increases. This is because, as we observe more heads (n increases), the likelihood of obtaining those heads given a true θ of 0.99 becomes extremely low. As a result, the posterior distribution of θ will assign negligible probability mass around θ = 0.99 for large sample sizes.

(c) From part (b), we can conclude that the choice of prior is important. In this case, the Uniform[0.4, 0.6] prior was not suitable for capturing the true value of θ = 0.99, especially as the number of observations (n) increases. If we have strong prior knowledge or belief about the range of θ, it would be better to choose a prior that assigns higher probability mass around the true value. This way, the posterior distribution would be more informative and accurately capture the true value of θ.

To learn more about posterior density here:

https://brainly.com/question/30849916

#SPJ4

Therefore, Jessica will pay $5270 in taxes for the amount above $9000 of her income

Jessica made $40,000 in taxable income last year and the income tax rate is 15% for the first $9000 plus 17% for the amount over $9000.

We need to determine how much must Jessica pay in income tax for last year.

Solution: Firstly, we need to calculate the amount that Jessica will pay for the first $9000 of her income using the formula; Amount = Rate x Base Rate = 15%Base = $9000Amount = 0.15 x $9000Amount = $1350Jessica will pay $1350 in taxes for the first $9000 of her income.

To calculate the amount that Jessica will pay for the amount above $9000, we need to subtract $9000 from $40000: $40000 - $9000 = $31000 Jessica will pay 17% in taxes for this amount:

Amount = Rate x Base Rate = 17%Base = $31000Amount = 0.17 x $31000Amount = $5270Therefore, Jessica will pay $5270 in taxes for the amount above $9000 of her income.

Now, we can calculate the total amount of taxes that Jessica must pay for last year by adding the amounts together: $1350 + $5270 = $6620x.  

To know more about subtract visit:

https://brainly.com/question/13619104

#SPJ11

The directional derivative of h at P in the direction of v = -i is 5e^-5 i

To find the directional derivative of the function h(x, y) = e^-5x sin(y) at point P(1, pi/2) in the direction of v = -i, we first need to calculate the gradient of h at point P.

The gradient of h is given by:

∇h(x, y) = (-5e^-5x sin(y), e^-5x cos(y))

Evaluating this at point P, we get:

∇h(1, pi/2) = (-5e^-5 sin(pi/2), e^-5 cos(pi/2)) = (-5e^-5, 0)

To find the directional derivative of h at P in the direction of v = -i, we use the formula:

Dv(h) = ∇h(P) · v / ||v||

where · denotes the dot product and ||v|| is the magnitude of v.

In this case, v = -i, so ||v|| = 1 (since the magnitude of a complex number is the absolute value of its real part). Therefore, we have:

Dv(h) = ∇h(1, pi/2) · (-i) / 1 = (-5e^-5, 0) · (-i) = 5e^-5 i

So the directional derivative of h at P in the direction of v = -i is 5e^-5 i. This is the correct answer.

Learn more on directional derivatives here:

https://brainly.com/question/30365299

#SPJ11

the indefinite integral of the given vector function is 126 t^2 i + tj + 882 kt + c.

The indefinite integral of 126 (2ti + j + 7k) dt is obtained by integrating each component of the vector function separately with respect to t and adding a constant of integration:

∫ 126 (2ti + j + 7k) dt = 126 ∫ 2ti dt + ∫ j dt + 126 ∫ 7k dt + c

= 126 t^2 i + tj + 882 kt + c

what is  indefinite integral ?

An indefinite integral is the antiderivative of a function, which is another function that, when differentiated, produces the original function. It is usually represented as a family of functions with a constant of integration added. The symbol used for indefinite integration is ∫f(x)dx, where f(x) is the function to be integrated and dx represents the variable of integration. The result of the indefinite integral is a function F(x) such that F'(x) = f(x).

To learn more about  indefinite integral visit:

brainly.com/question/29133144

#SPJ11

The probability of getting more than 12 successes in 14 trials with success probability 0.9 is approximately 0.9919. The variance of the given binomial distribution is 1.26 (rounded to two decimal places). The standard deviation of the given binomial distribution is approximately 1.123.

Part 1: To find the probability P(More than 12) for a binomial experiment with n=14 trials and success probability p=0.9, we can use the cumulative distribution function (CDF) of the binomial distribution:

P(More than 12) = 1 - P(0) - P(1) - ... - P(12)

where P(k) is the probability of getting exactly k successes in 14 trials:

[tex]P(k) = (14 choose k) * 0.9^k * 0.1^(14-k)[/tex]

Using a calculator or a statistical software, we can compute each term of the sum and then subtract from 1:

P(More than 12) = 1 - P(0) - P(1) - ... - P(12)

= 1 - binom.cdf(12, 14, 0.9)

≈ 0.9919 (rounded to four decimal places)

Therefore, the probability of getting more than 12 successes in 14 trials with success probability 0.9 is approximately 0.9919.

Part 2: The mean of a binomial distribution with n trials and success probability p is given by:

mean = n * p

Substituting n=14 and p=0.9, we get:

mean = 14 * 0.9

= 12.6

Therefore, the mean of the given binomial distribution is 12.6 (rounded to two decimal places).

Part 3: The variance of a binomial distribution with n trials and success probability p is given by:

variance = n * p * (1 - p)

Substituting n=14 and p=0.9, we get:

variance = 14 * 0.9 * (1 - 0.9)

= 1.26

Therefore, the variance of the given binomial distribution is 1.26 (rounded to two decimal places).

The standard deviation is the square root of the variance:

standard deviation = sqrt(variance)

= sqrt(1.26)

≈ 1.123 (rounded to three decimal places)

Therefore, the standard deviation of the given binomial distribution is approximately 1.123.

To know more about probability refer to-

https://brainly.com/question/30034780

#SPJ11

The pair of square roots that e fall is √1 and √9

From the question, we have the following parameters that can be used in our computation:

e = 2.718

Represent as an interval

So, we have

a < e < b

This means that

a < 2.718 < b

The number 2.718 is between 1 and 3

So, we have

1 < 2.718 < 3

Express 1 and 3 as square roots

√1 < 2.718 < √9

Hence, the pair of square roots that e fall is √1 and √9

Read more about expressions at

https://brainly.com/question/31819389

#SPJ4

The pair of square roots that e falls between is √7 and √8.

The range that the figure falls between is √7 and √8. To get the range, we will find the roots of all the numbers and see the one that the figure falls between.

√2 = 1.414

√3 = 1.732

√4 = 2

√5 = 2.236

√7 = 2.645

√8 = 2.828

Now we will look at the ranges and see the one that figures 2.718 falls between. This is √7 to √8.

Learn more about irrational numbers here:

https://brainly.com/question/20400557

#SPJ4

The integral [tex]$\int_0^5 5(x - x^3) dx$[/tex] represents the area under the curve [tex]$y = x - x^3$[/tex] from 0 to 5 i.e., the given statement is true.

In the given definite integral, the integrand [tex]$5(x - x^3)$[/tex] represents the height of infinitesimally small rectangles that are used to approximate the area under the curve. The integral sums up the areas of these rectangles over the interval from 0 to 5, giving us the total area.

To see why this integral represents the area, we can break down the integrand [tex]$5(x - x^3)$[/tex] into two parts: the constant factor 5, which scales the height, and the expression [tex]$(x - x^3)$[/tex], which represents the difference between the function value and the x-axis.

The term [tex]$x - x^3$[/tex] gives us the height of each rectangle, and multiplying it by 5 scales the height uniformly.

By integrating this expression over the interval from 0 to 5, we effectively sum up the areas of these rectangles and obtain the total area under the curve.

Thus, the statement is true, and the integral [tex]$\int_0^5 5(x - x^3) , dx$[/tex] represents the area under the curve [tex]$y = x - x^3$[/tex] from 0 to 5.

Learn more definite integral here:

https://brainly.com/question/30760284

#SPJ11

So i have something for ya'll to do here, I apologize for the inconvenience, but as an AI text-based model, I am unable to physically write on a piece of loose sleeve or send pictures.

1. 77.2 - 43.778:

To subtract these two numbers, align the decimal points and subtract the digits in each place value from right to left:

    77.2

 - 43.778

  -------

    33.422

2. 5.6 divided by 2.072:

To divide these numbers, you can use long division or express it as a fraction:

  5.6 ÷ 2.072 = 5.6/2.072

3. 6.811 x 4.9:

To multiply these numbers, align the decimal points and multiply as usual:

  6.811

x 4.9

------

  33.3439

Learn more about decimal here:

https://brainly.com/question/30958821

#SPJ11

The equation of the table is y=5x where 5 is the slope

The slope intercept form of a line is y=mx+b, where m is slope and b is the y intercept.

The slope of line passing through two points (x₁, y₁) and (x₂, y₂) is

m=y₂-y₁/x₂-x₁

Slope = 45-40/9-8

=5/1

Now let us find the y interept by taking an ordered pair (8, 40)

40 = 5(8)+b

b=0

So the equation of the table is y=5x

To learn more on slope of line click:

https://brainly.com/question/16180119

#SPJ1

The area to the right of 32 on a N(45,8) distribution is approximately 0.947.

Using a standard normal distribution table or a calculator, we first calculate the z-score for 32 on an N(45,8) distribution:

z = (32 - 45) / 8 = -1.625

Then, we find the area to the right of z = -1.625 using the standard normal distribution table or a calculator:

P(Z > -1.625) = 0.947

Therefore, the area to the right of 32 on a N(45,8) distribution is approximately 0.947.

To know more about standard normal distribution refer here:

https://brainly.com/question/29509087

#SPJ11

So, the correct option is: Vertical intercept = -15 and Horizontal intercept = 2.

The vertical intercept of a function is the value of the function when the input is zero. In other words, it is the point where the function intersects the y-axis. To find the vertical intercept of this function, we need to find the value of f(0) from the table.

Similarly, the horizontal intercept of a function is the point where the function intersects the x-axis. In other words, it is the value of the input for which the output of the function is zero. To find the horizontal intercept of this function, we need to find the value of x for which f(x) = 0 from the table.

In this case, we see from the table that f(0) = -15, which means that the function intersects the y-axis at -15. And we also see that f(2) = 0, which means that the function intersects the x-axis at 2. Therefore, the vertical intercept of the function is -15, and the horizontal intercept of the function is 2.

To know more about Vertical intercept,

https://brainly.com/question/29277179

#SPJ11

Therefore, the first three nonzero terms of the Maclaurin series for f are: f(x) = 0 + 0x + (0/2!)x^2 + (2/3!)x^3 + ...

The Maclaurin series for a function f is given by:

f(x) = f(0) + f'(0)x + (f''(0)/2!)x^2 + (f'''(0)/3!)x^3 + ...

Since f'(x) = sin(x^2), we can find the higher derivatives of f by applying the chain rule repeatedly:

f''(x) = d/dx (sin(x^2)) = cos(x^2) * 2x

f'''(x) = d/dx (cos(x^2) * 2x) = -2x^2 * sin(x^2) + 2cos(x^2)

Evaluating these derivatives at x = 0, we get:

f(0) = 0

f'(0) = sin(0) = 0

f''(0) = cos(0) * 2 * 0 = 0

f'''(0) = -2 * 0^2 * sin(0) + 2 * cos(0) = 2

To know more about Maclaurin series,

https://brainly.com/question/31745715

#SPJ11

Based on the model, a player with a career total of 40,000 points would have scored 3,734 points in their rookie season.

In this exercise, we would plot the rookie season-points on the x-axis (x-coordinates) of a scatter plot while the overall points would be plotted on the y-axis (y-coordinate) of the scatter plot through the use of Microsoft Excel.

On the Microsoft Excel worksheet, you should right click on any data point on the scatter plot, select format trend line, and then tick the box to display an equation of the curve of best fit (trend line) on the scatter plot.

Based on the scatter plot shown below, which models the relationship between the rookie season-points and the overall points, an equation of the curve of best fit is modeled as follows:

y = 5.74x + 18568

Based on the equation of the curve of best fit above, a player with a career total of 40,000 points would have scored the following points in their rookie season:

y = 5.74x + 18568

40,000 = 5.74x + 18568

5.74x = 40,000 - 18568

x = 21,432/5.74

x = 3,733.80 ≈ 3,734 points.

Read more on curve of best fit here: brainly.com/question/27311887

#SPJ1

The probability that you win at most once in the instant lottery when playing five times is approximately 0.4096.

To calculate the probability of winning at most once in the instant lottery when playing five times, we need to consider the different possibilities: winning zero times and winning once.

The probability of winning zero times (not winning) in one play is (1 - 0.2) = 0.8.

Since the outcomes are independent, the probability of winning zero times in five plays is (0.8)^5 = 0.32768.

The probability of winning once is given by the formula:

Probability of winning once = (number of ways to win once) * (probability of winning) * (probability of not winning the other times)

In this case, there is only one way to win once out of five plays, and the probability of winning is 0.2.

The probability of not winning the other four times is (1 - 0.2)^4 = 0.4096.

Therefore, the probability of winning once is 1 * 0.2 * 0.4096 = 0.08192.

To find the probability of winning at most once, we need to sum the probabilities of winning zero times and winning once:

Probability of winning at most once = Probability of winning zero times + Probability of winning once

= 0.32768 + 0.08192

= 0.4096

Therefore, the probability that you win at most once in the instant lottery when playing five times is approximately 0.4096.

The correct answer is option c: 0.4096.

Learn more about probability here:

https://brainly.com/question/32117953

#SPJ11

So, Zaheda travelled by air for 3 hours. She travelled 900 km by air. (Distance travelled by the plane = 300 km/h × 3 h = 900 km)

Hence, the required answer is 3 hours and the distance Zaheda travelled by air is 900 km.

Given information: Zaheda travels for 6 hours partly by car at 100 km/h and partly by air at 300km/h. If she travelled a total distance of 1200 km we need to find out how long did she travel by air.

Solution: Let the time for which Zaheda travelled by car be t hours, then she travelled by air for (6 - t) hours. Speed of the car = 100 km/h Speed of the plane = 300 km/h Let the distance travelled by the car be 'D'. Therefore, distance travelled by the plane will be (1200 - D).

Now, we can form an equation using the speed, time, and distance using the formula, S = D/T where S = Speed, D = Distance, T = Time. Speed of the car = D/t (Using above formula) Speed of the plane = (1200 - D)/(6 - t) (Using above formula) Distance travelled by the car = Speed of the car × time= (100 × t) km Distance travelled by the plane = Speed of the plane × time = (300 × (6 - t)) km

The total distance travelled by Zaheda = Distance travelled by car + Distance travelled by plane= (100 × t) + (300 × (6 - t))= 100t + 1800 - 300t= -200t + 1800= 1200 [Given]So, -200t + 1800 = 1200 => -200t = -600 => t = 3 hours Therefore, the time for which Zaheda travelled by air = (6 - t)= 6 - 3= 3 hours. So, Zaheda travelled by air for 3 hours.

She travelled 900 km by air. (Distance travelled by the plane = 300 km/h × 3 h = 900 km)Hence, the required answer is 3 hours and the distance Zaheda travelled by air is 900 km.

To know more about Speed, click here

https://brainly.com/question/17661499

#SPJ11

The point of intersection is (0, 4, 4).

To find the point at which the line passing through the points P(1, 0, 6) and Q(5, -1, 5) intersects the plane x*y - z = 7, we can first find the equation of the line and then substitute its coordinates into the equation of the plane to solve for the point of intersection.

The direction vector of the line passing through P and Q is given by:

d = <5-1, -1-0, 5-6> = <4, -1, -1>

So the vector equation of the line is:

r = <1, 0, 6> + t<4, -1, -1>

where t is a scalar parameter.

To find the point of intersection of the line and the plane, we need to solve the system of equations given by the line equation and the equation of the plane:

x*y - z = 7

1 + 4t*0 - t*1 = x   (substitute r into x)

0 + 4t*1 - t*0 = y   (substitute r into y)

6 + 4t*(-1) - t*(-1) = z   (substitute r into z)

Simplifying these equations, we get:

x = -t + 1

y = 4t

z = 7 - 3t

Substituting the value of z into the equation of the plane, we get:

x*y - (7 - 3t) = 7

x*y = 14 + 3t

(-t + 1)*4t = 14 + 3t

-4t^2 + t - 14 = 0

Solving this quadratic equation for t, we get:

t = (-1 + sqrt(225))/8 or t = (-1 - sqrt(225))/8

Since t must be non-negative for the point to be on the line segment PQ, we take the solution t = (-1 + sqrt(225))/8 = 1 as the point of intersection.

Therefore, the point of intersection of the line passing through P and Q and the plane x*y - z = 7 is:

x = -t + 1 = 0

y = 4t = 4

z = 7 - 3t = 4

So the point of intersection is (0, 4, 4).

Learn more about intersection here:

https://brainly.com/question/9462569

#SPJ11

The given initial value problem is y′′-4y=0. The solution to the initial value problem is y(t)=(3/2)*e^(2t)-(1/2)*e^(-2t).

This is a second-order homogeneous linear differential equation with constant coefficients. The characteristic equation is r^2-4=0, which has roots r=±2. Therefore, the general solution is y(t)=c1e^(2t)+c2e^(-2t), where c1 and c2 are constants determined by the initial conditions.

To find c1 and c2, we need to use the initial conditions. Let's say that y(0)=1 and y'(0)=2. Then, we have:

y(0)=c1+c2=1

y'(0)=2c1-2c2=2

Solving these equations simultaneously gives us c1=3/2 and c2=-1/2. Therefore, the solution to the initial value problem is y(t)=(3/2)*e^(2t)-(1/2)*e^(-2t).

Learn more about initial value here

https://brainly.com/question/2546258

#SPJ11

The relative change in tuition for the University of Washington from 2015/16 to 2016/17 is -16.7%. This means that the tuition in 2016/17 decreased by 16.7%.

According to the provided source, Washington state implemented tuition cutbacks, which resulted in a decrease in tuition fees. To calculate the relative change in tuition, we need to determine the percentage change between the initial and final tuition amounts.

The relative change in tuition is given by the formula: (final tuition - initial tuition) / initial tuition * 100%.

From the source, it is stated that the tuition at the University of Washington decreased by $1,088 from 2015/16 to 2016/17. The initial tuition in 2015/16 is not specified in the given information.

Assuming the initial tuition is denoted as "T", we can calculate the relative change as follows:

Relative change = ($1,088 / T) * 100%

Since the percentage change is rounded to one decimal place and we are asked to provide the absolute value, the relative change in tuition is -16.7%. This indicates that the tuition in 2016/17 decreased by 16.7% compared to the initial tuition.

Learn more about percentage here:

https://brainly.com/question/16797504

#SPJ11

The type of document described is an "income statement."

An income statement is a financial document that provides information about a company's revenue, expenses, and net profit over a specific period.

Step 1: Gather the necessary information.

Obtain the profit earned before tax, which represents the company's total earnings.

Determine the net profit after payment of taxes, which is the remaining profit after taxes have been deducted.

Step 2: Calculate the revenue earned by the company.

Revenue is the total income generated by the company from its primary operations.

Subtract the net profit after taxes from the profit earned before tax to find the revenue.

The formula to calculate revenue is: Revenue = Profit before tax - Net profit after taxes.

Step 3: Interpret the results.

The income statement provides valuable insights into a company's financial performance.

By comparing revenue with expenses, investors and stakeholders can assess the profitability of the company.

The income statement helps in understanding the impact of taxes on the company's net profit.

The income statement is a crucial financial document that presents the revenue earned by a company by analyzing the profit earned before tax and the net profit after payment of taxes. It provides an overview of the company's financial performance and helps in evaluating its profitability.

To know more about profitability, visit:

https://brainly.com/question/32845070

#SPJ11

Answer:36

Step-by-step explanation:

im done typing the explanations lol

there are good pythagorean theorem calculators, just search for them

Univariate analyses involve examining a single variable to better understand its distribution, central tendency, and dispersion. Continuous variables, on the other hand, can take any value within a specific range, such as height or weight.

For discrete and continuous variables, different univariate analyses are appropriate. Discrete variables are those that can only take specific, distinct values, such as counts or categories. Appropriate univariate analyses for discrete variables include frequency tables, bar charts, and pie charts. Frequency tables show the distribution of values by listing each possible value and its corresponding count. Bar charts represent this information graphically, with the height of each bar corresponding to the count of each value. Pie charts display the proportion of each value in the overall distribution as a slice of a circle.
For continuous variables, appropriate univariate analyses include histograms, box plots, and density plots. Histograms divide the data range into equal intervals, or "bins," and display the count of values within each bin as bars. Box plots illustrate the distribution by showing the data's median, quartiles, and potential outliers. Density plots estimate the probability distribution of the data by using a continuous, smooth curve.
In summary, discrete variables can be analyzed using frequency tables, bar charts, and pie charts, while continuous variables can be examined using histograms, box plots, and density plots. These univariate analyses help visualize the distribution and characteristics of each variable type.

Learn more about Univariate analyses here:

https://brainly.com/question/28108411

#SPJ11