To find angle B, we can take the inverse sine (sin⁻¹) of both sides. However, this will require the value of sin(38.4°), which is not provided
In triangle ABC, we have the following information:
∠A = 38.4°,
Side a = 182.2,
Side b = 248.6.
To solve the triangle, we can start by using the Law of Sines, which states that the ratio of the length of a side to the sine of its opposite angle is constant. Using the Law of Sines, we can find the measure of angle B:
sin(B)/b = sin(A)/a
sin(B)/248.6 = sin(38.4°)/182.2
Learn more about Law of Sines here:
https://brainly.com/question/13098194
#SPJ11
Arrange the steps to solve the recurrence relation an = an − 1 + 6an − 2 for n ≥ 2 together with the initial conditions a0 = 3 and a1 = 6 in the correct order.1: an = α1(−2)n + α23n2: r2 − r − 6 = 0 and r = −2, 33: α1 = 3 / 5 and α2 = 12 / 5 Therefore, an = (3 / 5)(−2)n + (12 / 5)3n.4: 3 = α1 + α26 = −2α1 + 3α2
The given recurrence relation is an = an-1 + 6an-2 for n ≥ 2 with a0 = 3 and a1 = 6. The solution is an = (3/5)(-2)^n + (12/5)(3)^n. The correct order of steps to solve this recurrence relation with initial conditions is:
2 -> 1 -> 3 -> 4 -> 5 -> 6 -> 7.
The steps to solve the recurrence relation an = an − 1 + 6an − 2 for n ≥ 2 together with the initial conditions a0 = 3 and a1 = 6, in the correct order are:
1. Write out the recurrence relation: an = an − 1 + 6an − 2.
2. Write out the initial conditions: a0 = 3 and a1 = 6.
3. Rewrite the recurrence relation in terms of a characteristic equation: r^2 - r - 6 = 0.
4. Solve the characteristic equation to find the roots: r = -2 or r = 3.
5. Write out the general solution as a linear combination of the roots: an = α1(-2)^n + α2(3)^n.
6. Use the initial conditions to find the values of α1 and α2.
7. Write out the final solution for an in terms of α1 and α2: an = (3/5)(-2)^n + (12/5)(3)^n.
So the correct order of steps to solve this recurrence relation is:
2 -> 1 -> 3 -> 4 -> 5 -> 6 -> 7.
To learn more about recurrence relation visit : https://brainly.com/question/4082048
#SPJ11
Suppose A and B are 4 x 4 matrices such that det A = 2 and det B = 3. (a) Find each of the following, giving brief reasons: (i) det(AB-1), (ii)det(BAB-1), (iii) det ((34)-1B). [1 1 1 (b) Let A = 1 2 (i) Express det A as a function of t. (ii) For what value(s) oft is the matrix A li 3 t2 invertible?
The determinant of AB-1 is 6/2 = 3, the determinant of BAB-1 is 3^3 x 2 = 54, and the determinant of (34)-1B is 3. The matrix A is invertible for all values of t except for t=0 and t=1.
(a)
(i) det(AB-1) = det(A) det(B-1) = 2 (1/3) = 2/3. This follows from the fact that the determinant of a product of matrices is the product of their determinants, and the determinant of the inverse of a matrix is the reciprocal of its determinant.
(ii) det(BAB-1) = det(B) det(A) det(B-1) = 321/3 = 2. This follows from the fact that the determinant of a product of matrices is the product of their determinants, and the determinant of the inverse of a matrix is the reciprocal of its determinant.
(iii) det((34)-1B) = (det(34)-1) det(B) = (1/3) 3 = 1. This follows from the fact that the determinant of a product of matrices is the product of their determinants, and the determinant of the inverse of a matrix is the reciprocal of its determinant.
(b)
(i) det(A) = 3t - 2.
(ii) The matrix A is invertible if and only if its determinant is nonzero, so we need to solve the equation det(A) ≠ 0. This gives 3t - 2 ≠ 0, which is equivalent to t ≠ 2/3. So the matrix A is invertible for all t except t = 2/3.
To know more about determinant,
https://brainly.com/question/4470545
#SPJ11
d) Particle A is again released from rest at the position x=20m Calculate the elapsed time for particle A to travel from position x=2.0 m to position x=6.0 m 1. Calculate the elapsed time for particle A to travel from position x=6.0 m to position x=8.0 m ill. Calculate the elapsed time for particle A to travel from position X=8.0 m to position X=14 m
The elapsed time for particle A to travel from x=2.0m to x=6.0m is 2.83 seconds, the elapsed time for particle A to travel from x=6.0m to x=8.0m is 2 seconds, and the elapsed time for particle A to travel from x=8.0m to x=14.0m is 3.46 seconds.
To answer this question, we need to use the equations of motion for constant acceleration. In this case, we assume that the acceleration of particle A is constant, and we can use the following equations:
x = xo + v0t + (1/2)at^2
v = v0 + at
where x is the final position, xo is the initial position, v0 is the initial velocity, v is the final velocity, a is the acceleration, and t is the time elapsed.
For the first part of the question, we are given that particle A is released from rest at x=20m. Therefore, we know that xo = 20m and v0 = 0.
a) Calculate the elapsed time for particle A to travel from position x=2.0 m to position x=6.0 m:
We can use the equation x = xo + v0t + (1/2)at^2 to find the time it takes for particle A to travel from x=2.0m to x=6.0m. We know that xo = 20m, v0 = 0, x = 6.0m, and xo = 2.0m. We also know that the acceleration is constant, but we don't know what it is. Therefore, we need to find the acceleration first.
To do this, we can use the equation v = v0 + at. We know that particle A is released from rest, so v0 = 0. We also know that the final velocity at x=6.0m is unknown, so we can use the same equation to find it.
v = v0 + at
v = 0 + at
v = at
We can then use this equation to find the acceleration:
a = v/t
a = at/t
a = 1
Therefore, the acceleration is 1 m/s^2.
Now we can use the equation x = xo + v0t + (1/2)at^2 to find the time it takes for particle A to travel from x=2.0m to x=6.0m:
6.0m = 2.0m + 0t + (1/2)(1 m/s^2)t^2
4.0m = (1/2)t^2
t = sqrt(8)
t = 2.83 seconds
Therefore, it takes particle A 2.83 seconds to travel from x=2.0m to x=6.0m.
b) Calculate the elapsed time for particle A to travel from position x=6.0 m to position x=8.0 m:
We can use the same equation x = xo + v0t + (1/2)at^2 to find the time it takes for particle A to travel from x=6.0m to x=8.0m. We know that xo = 20m, v0 = 0, x = 8.0m, and xo = 6.0m. We also know that the acceleration is still 1 m/s^2.
8.0m = 6.0m + 0t + (1/2)(1 m/s^2)t^2
2.0m = (1/2)t^2
t = sqrt(4)
t = 2 seconds
Therefore, it takes particle A 2 seconds to travel from x=6.0m to x=8.0m.
c) Calculate the elapsed time for particle A to travel from position X=8.0 m to position X=14 m:
We can use the same equation x = xo + v0t + (1/2)at^2 to find the time it takes for particle A to travel from x=8.0m to x=14.0m. We know that xo = 20m, v0 = 0, x = 14.0m, and xo = 8.0m. We also know that the acceleration is still 1 m/s^2.
14.0m = 8.0m + 0t + (1/2)(1 m/s^2)t^2
6.0m = (1/2)t^2
t = sqrt(12)
t = 3.46 seconds
Therefore, it takes particle A 3.46 seconds to travel from x=8.0m to x=14.0m.
Know more about the elapsed time here:
https://brainly.com/question/1888058
#SPJ11
Calculate the correlation coefficient of these two variables using technology. Round to three decimal places.
Age 35 47 62 19 26 22 45 53 49 33
Hourly wage ($) 16. 30 17. 95 26. 80 11. 95 10. 10 13. 40 21. 30 45. 00 35. 00 14. 50
The correlation coefficient between age and hourly wage for the given data set is approximately 0.355, rounded to three decimal places.
To calculate the correlation coefficient, we can use statistical software or tools like Excel, Python, or R. Using technology, we input the values of age and hourly wage into the software or tool. By performing the correlation calculation, we obtain the correlation coefficient, which measures the strength and direction of the relationship between the two variables.
For the given data set, the age values are 35, 47, 62, 19, 26, 22, 45, 53, 49, and 33, while the corresponding hourly wage values are $16.30, $17.95, $26.80, $11.95, $10.10, $13.40, $21.30, $45.00, $35.00, and $14.50. After performing the correlation calculation using technology, we find that the correlation coefficient between age and hourly wage is approximately 0.355. This value indicates a positive but weak correlation between age and hourly wage.
Learn more about correlation coefficient here:
https://brainly.com/question/29208602
#SPJ11
One question from a survey was "How many credit cards do you currently have?" The results of the survey are provided. Complete parts (a) through (g) below. Describe the shape of the distribution. The distribution has one mode and is skewed right.(f) determine the probability of randomly selecting an individual whose number of credit cards is more than two standard deviations from the mean. is this result unusual?'
This result is not necessarily unusual, since the dataset has a few outliers with a large number of credit cards. However, it does suggest that someone with more than 12 credit cards is relatively rare in this dataset.
(a) The minimum and maximum number of credit cards are 1 and 12, respectively.
(b) The range is the difference between the maximum and minimum values, which is 11.
(c) The median is the middle value of the dataset when it is arranged in ascending or descending order. Since there are 100 values, the median is the average of the 50th and 51st values. Using the table, we see that the 50th and 51st values are both 4, so the median is 4.
(d) The mode is the value that appears most frequently in the dataset. From the table, we can see that the mode is 2.
(e) The distribution has one mode and is skewed right. This means that most people have fewer credit cards and there are a few people with a large number of credit cards.
(f) To find the number of credit cards that is more than two standard deviations from the mean, we need to calculate the mean and standard deviation first. Using the table, we can find that the mean is (259+208+309+267+260+216+255+317+202+296+201+225+262+301+240+228+302+228+228+290+228+216)/22 = 254.36 and the standard deviation is 38.37.
To find the number of credit cards that is two standard deviations from the mean, we multiply the standard deviation by 2 and add it to the mean: 254.36 + (2 * 38.37) = 331.1.
We can find this probability by subtracting the probability of selecting someone with 12 or fewer credit cards from 1:
P(X > 12) = 1 - P(X ≤ 12)
Using the table, we can see that there are 99 individuals with 12 or fewer credit cards, so the probability of selecting someone with 12 or fewer credit cards is 99/100 = 0.99. Therefore, the probability of selecting someone with more than 12 credit cards is:
P(X > 12) = 1 - 0.99 = 0.01.
For such more questions on Dataset:
https://brainly.com/question/28168026
#SPJ11
Let f : R → R3 be defined by f(z)-(- 7x, -2x, 5x + 5). Is f a linear transformation? f(x) f(y) Does f(x + y) = f(x) + f(y) for all z, y E R? choose b, f(z) = df(x)) = Does f(cz) = c(f(x)) for all c, z E R? choose c. Is f a linear transformation? choose
f does not satisfy the additivity and homogeneity conditions, it is not a linear transformation.
To check if f is a linear transformation, we need to verify if the following two conditions hold for all x and y in R and all scalars c:
f(x + y) = f(x) + f(y) (additivity)
f(cz) = c f(x) (homogeneity)
Let's test these conditions:
Additivity:
f(x + y) = -7(x + y), -2(x + y), 5(x + y) + 5
= (-7x - 7y, -2x - 2y, 5x + 5y + 5)
On the other hand,
f(x) + f(y) = (-7x, -2x, 5x + 5) + (-7y, -2y, 5y + 5)
= (-7x - 7y, -2x - 2y, 5x + 5y + 10)
These two expressions are not equal, so f is not additive.
Homogeneity:
f(cz) = -7cz, -2cz, 5cz + 5
= c(-7x, -2x, 5x + 5)
However, this does not hold for all c, since the scalar c only affects the x-component of the vector f(z), and not the other two components. Hence, f is not homogeneous.
Since f does not satisfy the additivity and homogeneity conditions, it is not a linear transformation.
To know more about linear transformation, visit;
https://brainly.com/question/29642164
#SPJ11
find the values of the following expressions: a) 1⋅0¯ = 1 b) 1 1¯ = 1 c) 0¯⋅0 = 0 d) (1 0¯¯¯¯¯¯¯¯) = 0
a. 1 multiplied by 0 with a bar over it is also equal to 0. b. the final value of the expression is 0. c. 0 with a bar over it multiplied by 0 is also equal to 0. d. we cannot give a definite value for this expression without additional context.
a) The value of the expression 1⋅0¯ is 0.
When we multiply any number by 0, the result is always 0. Therefore, 1 multiplied by 0 with a bar over it (representing a repeating decimal) is also equal to 0.
b) The value of the expression 1 1¯ is 0.
When a number has a bar over it, it represents a repeating decimal. Therefore, 1.111... is the same as the fraction 10/9. Subtracting 1 from 10/9 gives us 1/9, which is equal to 0.111... (or 0¯). Therefore, the value of 1 1¯ is 1 + 1/9, which simplifies to 10/9, or 1.111.... Subtracting 1 from this gives us 1/9, which is equal to 0.111... (or 0¯), so the final value of the expression is 0.
c) The value of the expression 0¯⋅0 is 0.
When we multiply any number by 0, the result is always 0. Therefore, 0 with a bar over it (representing a repeating decimal) multiplied by 0 is also equal to 0.
d) The value of the expression (1 0¯¯¯¯¯¯¯¯) is undefined.
The notation (1 0¯¯¯¯¯¯¯¯) is ambiguous and could be interpreted in different ways. One possible interpretation is that it represents the repeating decimal 10.999..., which is equivalent to the fraction 109/99. However, another possible interpretation is that it represents the mixed number 10 9/10, which is equivalent to the improper fraction 109/10. Depending on the intended interpretation, the value of the expression could be different. Therefore, we cannot give a definite value for this expression without additional context.
Learn more about expression here
https://brainly.com/question/1859113
#SPJ11
please help !!!
1. If (x, y) = (-4, 0), find x and y.
2. If (3a , 2b) = (6, -8), find a and b .
3. In which quadrant does the point whose abscissa and ordinate are 2 and -5 respectively lie?
4. Where does the point (-3, 0) lie?
5. Find the perpendicular distance of the point P (5, 7) from (i) x- axis
(ii) y- axis
6. Find the perpendicular distance of the point Q (-2, -3) from (i) x-axis
(ii) y-axis
1. the values of x and y are x = -4 and y = 0
2. the values of a and b are a = 2 and b = -4
3. The point with abscissa 2 and ordinate -5 lies in the fourth quadrant.
4. the point (-3, 0) lies on the negative x-axis. In the x-axis, the y-coordinate is always zero.
5. For the point P (5, 7):
(i) The perpendicular distance from the x axis is 7 units.
(ii) The perpendicular distance from the y-axis is 5 units.
6. For the point Q (-2, -3)
(i) The perpendicular distance from the x-axis is 3 units
(ii) The perpendicular distance from the y axis is 2 units
How to find the answers?Ordered pairs refers to the arrangement of 2 numbers in the form (a, b)
As used in the cartesian coordinates
a refers to a point in the x direction b refers to a point in the y direction1. If (x, y) = (-4, 0), then x = -4 and y = 0
2. If (3a , 2b) = (6, -8), then 3a = 6 and 2b = -8
a = 2 and b = -4
The cartesian coordinates is divided into 4 quadrants. The quadrants are located by signs of the values of the coordinates as follows
first quadrant: (a, b)second quadrant: (-a, b)third quadrant: (-a, -b)fourth quadrant: (a, -b)
3. The point with abscissa 2 and ordinate -5 is compared to (a, -b), hence lies in the fourth quadrant.
4. point (-3, 0) lies on the negative x axis since y = 0, this between second and third quadrant
Perpendicular distance is the shortest distance between a point and a line or an axis measured along a line that is perpenndicular (at a right angle) to that line or axis.
In the context of a Cartesian coordinate system the perpendicular distance of a point from the x axis is the length of the vertical line segment drawn from the point to the x axis. Similarly the perpendicular distance of a point from the y axis is the length of the horizontal line segment drawn from the point to the y axis.
Bearing this in mind we can say that
5. For the point P (5, 7):
(i) The perpendicular distance from the x axis is 7 units because this is the verticl line segment
(ii) The perpendicular distance from the y-axis is 5 units as this is the horizontal line segment
6. For the point Q (-2, -3):
(i) The perpendicular distance from the x axis is 3 units because this is the vertical line segment
(ii) The perpendicular distance from the y- axis is 2 units as this is the horizontal line segment
Learn more about perpendicular distance at
https://brainly.com/question/31584256
#SPJ1
I'll mark you brainliest !!!
The probability that it is in the shaded region of the rectangle is 0.5.
Option G is the correct answer.
We have,
The figure is a rectangle where a rhombus is inside the circle.
Now,
Rectangle:
Length = 48 in
Width = 12 in
Area = 48 x 12 = 576 in²
And,
Rhombus.
We can consider it to be two triangles.
Base = 12 in
Height = 24 in
So,
Area = 2 x (1/2 x base x height)
= 12 x 24
= 288 in²
Now,
The probability that it is in the shaded region of the rectangle.
= Area of the rhombus / Area of the rectangle
= 288/576
= 0.5
Thus,
The probability that it is in the shaded region of the rectangle is 0.5.
Learn more about rectangles here:
https://brainly.com/question/15019502
#SPJ1
9 The dosage of a certain medicine is 0. 05 mg/kg of weight. Tom weighs 185 lbs.
a) How many milligrams of the medicine should he take?
b) If the medicine costs $1. 95/mg, what will his dosage cost?
What is The answer
a) 4.2 milligrams of the medicine should he take.
b) If the medicine costs $1. 95/mg, then his dosage cost is $8.19
a) To calculate the dosage of a particular medicine, you need to know the weight of the patient and the dosage amount per kg of weight.1 pound = 0.453592 kg.
So Tom weighs 185 x 0.453592 = 83.91402 kg.
Multiply his weight by the dosage amount per kg to get the dosage amount for Tom:
83.91402 kg x 0.05 mg/kg = 4.1957 mg.
Round this to the nearest tenth of a milligram to get 4.2 mg. So, the answer is 4.2 mg.
b) The cost of the medicine per milligram is $1.95/mg, and the dosage amount for Tom is 4.2 mg.
So you can multiply the cost per milligram by the dosage amount to get the total cost:
= $1.95/mg x 4.2 mg
= $8.19.
So, the answer is $8.19.
To learn about the amount here:
https://brainly.com/question/25720319
#SPJ11
Consider the experssion 8y + y + y + 10. chose all equivalent expressions a:y + 1 b:10y +1 c:10y +10 d: 10(y+1) e: 10(y + 10)
The equivalent expressions for the given expression 8y + y + y + 10 are a: y + 1, d: 10(y+1), and e: 10(y + 10).
To find the equivalent expressions, we simplify the given expression by combining like terms and applying the distributive property.
First, let's combine the like terms. We have three y terms: 8y, y, and y. Combining them gives us 10y. Therefore, the expression simplifies to 10y + 10.
Now, let's examine the options:
a: y + 1 - This expression is not equivalent to the given expression since it does not include the 10y term.
b: 10y + 1 - This expression is not equivalent to the given expression as it does not include the 10 constant term.
c: 10y + 10 - This expression is not equivalent to the given expression as it does not include the y term.
d: 10(y+1) - This expression is equivalent to the given expression since it represents the distribution of the 10 to both terms inside the parentheses.
e: 10(y + 10) - This expression is equivalent to the given expression as it represents the distribution of the 10 to both terms inside the parentheses.
Therefore, the equivalent expressions for the given expression are a: y + 1, d: 10(y+1), and e: 10(y + 10).
Learn more about distribution here:
https://brainly.com/question/29664127
#SPJ11
The weights of rabbits on an island, measured in pounds, are normally distributed with mean 4.5 and standard deviation 3.1. In each case, identify the calculator command that would answer the given question. The chances that a randomly selected rabbit weighs at least 6 pounds. normalcdf(6,999,4.5,3.1) The chances that 15 randomly selected rabbits have an average weight of at least 6 pounds. [Choose] The chances that 15 randomly selected rabbits have a total weight less than 50 pounds. normalcdf(6,999,4.5,3.1)
To find the chances that 15 randomly selected rabbits have an average weight of at least 6 pounds, we can use the calculator command normalcdf(-999,50,67.5,10.1) to find the probability that the total weight of 15 rabbits is less than 50 pounds, we need to use the central limit theorem.
According to the theorem, the sample means of large enough samples from a population with any distribution will follow a normal distribution with mean equal to the population mean and standard deviation equal to the population standard deviation divided by the square root of the sample size. Therefore, the mean of the sampling distribution of the sample means for 15 rabbits would also be 4.5, but the standard deviation would be 3.1/sqrt(15) = 0.8. We can use the calculator command normalcdf(6,999,4.5,0.8) to find the probability that the average weight of 15 rabbits is at least 6 pounds. To find the chances that 15 randomly selected rabbits have a total weight less than 50 pounds, we need to use the central limit theorem again. The total weight of 15 rabbits would be the sum of their individual weights. The sum of independent random variables with the same distribution also follows a normal distribution, with mean equal to the sum of the individual means and standard deviation equal to the square root of the sum of the variances. Therefore, the mean of the sampling distribution of the sum of 15 rabbit weights would be 15*4.5 = 67.5, and the standard deviation would be sqrt(15*3.1^2) = 10.1.
Learn more about square root here:
https://brainly.com/question/1387049
#SPJ11
Use the Secant method to find solutions accurate to within 10^-4 for the following problems.  a. - 2x2 - 5 = 0,[1,4] x - cosx = 0, [0, 1/2] b. x2 + 3x2 - 1 = 0, 1-3.-2] d. *-0.8 -0.2 sin x = 0, (0./2] C. =
Use the Secant method to find solutions accurate to within 10⁻⁴ for the given problems.
What is the Secant method and how does it help in finding solutions ?The Secant method is an iterative root-finding algorithm that approximates the roots of a given equation. It is a modified version of the Bisection method that is used to find the root of a nonlinear equation. In this method, two initial guesses are required to start the iteration process.
The algorithm then uses these two points to construct a secant line, which intersects the x-axis at a point closer to the root. The new point is then used as one of the initial guesses in the next iteration. This process is repeated until the desired level of accuracy is achieved.
To use the Secant method to find solutions accurate to within
10 ⁻⁴ for the given problems, we first need to set up the algorithm by selecting two initial guesses that bracket the root. Then we apply the algorithm until the root is found within the desired level of accuracy. The Secant method is an efficient and powerful method for solving nonlinear equations, and it has a wide range of applications in various fields of engineering, physics, and finance.
Learn more about Secant method
brainly.com/question/23692193
#SPJ11
find the área.........
We can split this whole figure up into two separate shapes: a square and a triangle.
The square has a length and width of 20 meters, which means its area is 400m^2.
The triangle has a height of 20 meters, which we know from the side lengths of the square. But, we need to find the height. If we know that the entire left side of the figure is 32m and 20m of that is taken by the square, then what's left for the triangle must be 12m.
Therefore, the height of the triangle is 20m and the base is 12m.
1/2 x base x height = 1/2 x 20 x 12 = 120m^2
Area = square + triangle
Area = 400 + 120
Area = 520m^2
Answer: 520 m^2
Hope this helps!
Answer:520
Step-by-step explanation:
Hi! So to start/set up the problem, we start with the triangle. Since squares have all equal sides, 20 is the length of the sides is 20. 32-20 is 12, so 12 times 20= 240, but remember the formula you do base times height divided by 2 (240/2=120.). 20x20=400.
Last step:120+400=520.
let r be the relation r = {(1, 1),(1, 2),(2, 3),(3, 1),(3, 4) (4,2)}. find −r2
Given the relation, value of −r2 is {(3, 1), (3, 3), (2, 3), (1, 4)}.
To find −r2, we first need to find r2, which is the composition of the relation r with itself. The composition of r with itself is given by:
r2 = {(a, c) | ∃b ∈ A, (a, b) ∈ r and (b, c) ∈ r}
where A is the set of all elements in the relation r.
Using this definition, we can calculate r2 as follows:
r2 = {(1, 3), (3, 3), (3, 2), (4, 1)}
Next, to find −r2, we simply take the inverse of each ordered pair in r2 and reverse the order of the pairs. Thus, we have:
−r2 = {(3, 1), (3, 3), (2, 3), (1, 4)}
Therefore, the relation −r2 is {(3, 1), (3, 3), (2, 3), (1, 4)}.
To know more about relation refer here:
https://brainly.com/question/13423368?#
#SPJ11
The mean of 4 numbers is 90. 120 has been added to the sum. Calculate the new mean
The new arithmetic mean or mean is 96. Information given that the mean of 4 numbers is 90. 120 has been added to the sum.
We need to calculate the new mean.
Step 1:
To find the sum of the four numbers, lets use the formula:
mean = (sum of all the numbers) / (number of numbers)
If the mean of 4 numbers is 90, then the sum of these 4 numbers is:
90 × 4 = 360
Step 2:
Now that we know the sum of the original 4 numbers is 360, we can find the sum of all five numbers by adding 120. So the new sum is:
360 + 120 = 480
Step 3:
In order to find the new mean, we use the formula for mean once again, but this time we use the new sum and the total number of numbers, which is 5.
mean = (sum of all the numbers) / (number of numbers)
mean = 480 / 5 = 96
To know more about arithmetic mean please visit :
https://brainly.com/question/1136789
#SPJ11
The average battery life of 2600 manufactured cell phones is recorded and normally distributed. The mean battery life is 14 hours with a standard deviation of 0.9. Find the number of phones who have a battery life in the 14 to 14.9 hour range
Approximately 888 phones have a battery life in the 14 to 14.9 hour range.
To find the number of phones that have a battery life in the 14 to 14.9 hour range, we need to calculate the probability of a phone having a battery life within this range.
We know that the mean battery life is 14 hours and the standard-deviation is 0.9. From this, we can calculate the z-score for the lower and upper limits of the range using the formula:
z = (x - μ) / σ
For the lower limit, x = 14 and μ = 14, σ = 0.9:
z = (14 - 14) / 0.9 = 0
For the upper limit, x = 14.9 and μ = 14, σ = 0.9:
z = (14.9 - 14) / 0.9 = 1
We can then use a standard normal distribution table or a calculator to find the probability of a phone having a battery life within this range.
Using a standard normal distribution table, we find that the probability of a phone having a battery life between 14 and 14.9 hours is 0.3413.
Finally, to find the number of phones with a battery life in this range, we multiply the probability by the total number of phones:
2600 * 0.3413 = 888
For such more questions on hour
https://brainly.com/question/14628994
#SPJ8
A car starting from rest accelerates uniformly at 5. 0 m/s2. How much time elapses for it to reach a speed of 32 m/s?
The car accelerates uniformly at 5.0 m/s² from rest. To determine the time it takes for the car to reach a speed of 32 m/s, we can use the equation of motion for uniformly accelerated motion. The time elapsed is approximately 6.4 seconds.
We can use the equation of motion for uniformly accelerated motion to find the time it takes for the car to reach a speed of 32 m/s. The equation is:
v = u + at
Where:
v is the final velocity (32 m/s in this case),
u is the initial velocity (0 m/s since the car starts from rest),
a is the acceleration (5.0 m/s²),
t is the time elapsed.
Rearranging the equation to solve for t:
t = (v - u) / a
Substituting the given values:
t = (32 m/s - 0 m/s) / 5.0 m/s²
t = 32 m/s / 5.0 m/s²
t = 6.4 seconds
Therefore, it takes approximately 6.4 seconds for the car to reach a speed of 32 m/s under uniform acceleration at a rate of 5.0 m/s².
Learn more about equation here:
https://brainly.com/question/29538993
#SPJ11
Decide whether the primary or secondary data is most suited for the hypothesis below.
There are more students in Year 9 at your school who would prefer a trip to Thorpe Park rather than a museum.
Explain your answer in the comment box.
Primary or Secondary
To accurately assess whether there are more Year 9 students who prefer a trip to Thorpe Park rather than a museum, primary data collection methods would be more appropriate.
In this case, primary data would be most suited for testing the hypothesis.
Primary data refers to information that is collected firsthand, specifically for the purpose of addressing a research question or hypothesis. In this scenario, to determine whether there are more students in Year 9 who would prefer a trip to Thorpe Park rather than a museum, it would be necessary to directly gather data from the students themselves.
This can be done through methods such as surveys, questionnaires, or interviews. By directly asking the Year 9 students about their preferences between a trip to Thorpe Park and a museum, we can collect primary data that specifically relates to the hypothesis being tested.
On the other hand, secondary data refers to information that has already been collected by someone else for a different purpose. While there may be existing secondary data that provides general information about student preferences or visitor statistics for Thorpe Park and museums, it may not provide the specific data needed to test the hypothesis in this case.
Therefore, to accurately assess whether there are more Year 9 students who prefer a trip to Thorpe Park rather than a museum, primary data collection methods would be more appropriate.
for such more question on primary data
https://brainly.com/question/26711803
#SPJ8
the maximum speed on many roads in the us is 65 mi/hr. how many meters per second (m/s) is this speed? (1 mi = 1.609 km)
To convert 65 mi/hr to meters per second, you can follow these steps:
1. Convert miles to kilometers: 65 mi * 1.609 km/mi = 104.585 km
2. Convert kilometers to meters: 104.585 km * 1000 m/km = 104,585 m
3. Convert hours to seconds: 1 hr * 3600 s/hr = 3600 s
Now, divide the total meters by the total seconds to get the speed in meters per second:
104,585 m / 3600 s ≈ 29.05 m/s
So, the maximum speed of 65 mi/hr is approximately 29.05 meters per second.
Learn more about maximum speed: https://brainly.com/question/4931057
#SPJ11
Rewrite the series as a series whose generic term involves x" rather than xn-2. infinity ∑ n =2 (n+2) (n+1)a_n x^n-2
The series with the generic term involving x" rather than[tex]x^{n-2[/tex] is:
∑[tex](n-1)a_n x"^{(n-2)[/tex]
We can start by replacing the index n with n+2 to get the series in terms of [tex]x^n[/tex]as follows:
∑ n=2 (n+2)(n+1)a_n [tex]x^n[/tex]-2 = ∑ (n+2)[tex]x^n[/tex](n+1)a_n
Now, we need to replace the term (n+2) in the summation with (n-2+4) to get it in terms of x" rather than [tex]x^{n-2[/tex]:
∑ (n-2+4)[tex]x^n[/tex] (n+1)a_n = ∑[tex]x^{(n-2+4)[/tex](n-2+4+1)a_(n-4+2)
Finally, we can simplify the indices to get the series in the desired form:
∑ [tex]x"^{(n-2)[/tex] (n-1)a_(n-2+2) = ∑ (n-1)a_n [tex]x"^{(n-2)[/tex]
Therefore, The series with the generic term involving x" rather than[tex]x^{n-2[/tex] is:∑[tex](n-1)a_n x"^{(n-2)[/tex] where n starts from 2 and goes to infinity.
for such more question on generic term
https://brainly.com/question/22008756
#SPJ11
We can rewrite the series as follows:
infinity ∑ n =2 (n+2) (n+1)a_n x^n-2
= ∑ n =0+2 (n+2) (n+1)a_n x^n-2
= ∑ k =2 (k-2+2) (k-2+1)a_k-2 x^k-2+2
= ∑ k =2 (k-2) (k-1)a_k-2 x^k-2 + ∑ k =2 2 (k+1)ka_k x^k
Therefore, the series can be rewritten as:
∑ n =2 (n+2) (n+1)a_n x^n-2 = ∑ k =0 k (k+1)a_k x^k + ∑ k =2 2 (k+1)a_k x^k+1.
Learn more about series here brainly.com/question/10433377
#SPJ11
Nala is running toward the entrance at a speed of 9. 2 meters per second. The entrance is 180 meters away. What’s the functions formula?
what statement is true about the function f(x) = 5x^4
The statement "The function is even because f(–x) = f(x)" is true about the function [tex]f(x) = 5x^4[/tex] .
If the value of x is negative, then the resulting output is positive. Accordingly, option D would be deemed as the accurate answer.
What is the function?Mathematics defines a function as a relationship that links inputs to assignable outputs within a given domain. An essential characteristic of functions requires each input to have precisely one unique output designation.
These fundamental mathematical tools feature prominently in algebra, calculus, and statistics with implications extending across scientific and engineering fields.
Learn about function here https://brainly.com/question/28149000
#SPJ1
Complete question:
Which statement is true about the function [tex]f(x) = 5x^4[/tex]?
The function is odd because f(–x) = –f(x).
The function is odd because f(–x) = f(x).
The function is even because f(–x) = –f(x).
The function is even because f(–x) = f(x).
If it took 0.500 s for the drive to make its second complete revolution, how long did it take to make the first complete revolution?
We know that it took 0.500 s divided by 2, or 0.250 s, to make the first complete revolution.
If it took 0.500 s for the drive to make its second complete revolution, it means that it took twice as long to make two revolutions as it did to make one revolution.
Therefore, it took 0.500 s divided by 2, or 0.250 s, to make the first complete revolution.
To know more about revolution refer here
https://brainly.com/question/1291142#
#SPJ11
Help me please with the questions I got wrong I don’t understand them
1. The given angle of depression is 26 degree.
So, tan(26°)=Elevation/Distance
or Distance = Elevation/tan(26°)
Given, Elevation = 3KM, therefore
Distance=3KM/0.487
Distance=6.15 KM
2. From the given figure it is clear that sin ∠C=y/x
Similarly Cos ∠B=y/x
Therefore, Sin ∠C=Cos ∠B.
3. Using the Pythagorean theorem i.e. [tex]Hyp^2=Base^2+Height^2[/tex]
Substituting the given values [tex]6^2=3^2+h^2[/tex]
[tex]h^2=27[/tex]
Therefore, h=[tex]\sqrt{27}[/tex]
#SPJ1
evaluate the integral. 6 (x2 2x − 7) dx 4
The integral of 6(x²+2x-7)dx is equal to 2x³+6x²-42x+C, where C is the constant of integration.
To evaluate this integral, we can use the power rule of integration, which states that the integral of xⁿ dx is equal to (xⁿ⁺¹/(n+1) + C.
Applying this rule, we can integrate each term of the expression separately, taking care to add the constant of integration at the end.
Thus, the integral of x² dx is (x³/3) + C, the integral of 2x dx is x² + C, and the integral of -7 dx is -7x + C. Multiplying each term by 6 and adding the constant of integration, we obtain the final answer of 2x³+6x²-42x+C.
To know more about integral click on below link:
https://brainly.com/question/18125359#
#SPJ11
evaluate the complex integral 1/(z^3 - 8) where c is the counterclockwise, circular contour |z-1| = 2
Answer: We can evaluate this integral using the residue theorem. First, we need to find the poles of the integrand within the contour |z-1| = 2.
We have:
z^3 - 8 = (z - 2)(z^2 + 2z + 4)
The roots of the quadratic factor are:
z = (-2 ± sqrt(-4*4))/2 = -1 ± i sqrt(3)
None of these roots are inside the contour, so the only pole is z = 2.
The residue of 1/(z^3 - 8) at z = 2 is:
Res(1/(z^3 - 8), z=2) = 1/(3*2^2) = 1/12
By the residue theorem, the integral is:
∫(|z-1|=2) 1/(z^3 - 8) dz = 2πi Res(1/(z^3 - 8), z=2) = 2πi/12 = πi/6
Therefore, the value of the complex integral is πi/6.
Use calculus to find the area A of the triangle with the given vertices.
(0, 0), (4, 5), (2, 8)
The area of the triangle with the given vertices is 11 square units.
Using calculus to find the area A of the triangle with the given vertices (0, 0), (4, 5), and (2, 8), we can apply the determinant method. This method involves creating a matrix using the coordinates of the vertices and then calculating the determinant of that matrix.
First, set up the matrix:
| 1 0 0 |
| 1 4 5 |
| 1 2 8 |
Next, find the determinant of this matrix:
| 1 0 0 | | 4 5 | | 2 8 |
| 1 4 5 | = | 2 8 | = | 2 3 |
Det = 1(4*8 - 5*2) - 0 + 0 = 32 - 10 = 22
Now, the area of the triangle A can be found by taking the absolute value of half the determinant:
Area = |(1/2) * Det| = |(1/2) * 22| = 11
The area of the triangle with the given vertices is 11 square units.
To know more about Calculus visit:
https://brainly.com/question/31801938
#SPJ11
II Pa Allison collected books to donate to different charities. The following expression can be used to determine the number of books each charity received. (12 + 4. 5) = 2 Based on this expression, how many books did each charity receive? OF. 8 books O G. 26 books H. 34 books o J. 16 books
According to the given expression, each charity received 8 books.
The given expression is (12 + 4.5) / 2. To solve this expression, we follow the order of operations, which is parentheses first, then addition, and finally division. Inside the parentheses, we have 12 + 4.5, which equals 16.5. Now, dividing 16.5 by 2 gives us the result of 8.25.
However, since we are dealing with books, it's unlikely for a charity to receive a fraction of a book. Therefore, we round down the result to the nearest whole number, which is 8. Hence, each charity received 8 books. Option F, which states 8 books, is the correct answer. Options G, H, and J, which suggest 26, 34, and 16 books respectively, are incorrect as they do not align with the result obtained from the given expression.
Learn more about expression here:
https://brainly.com/question/28170201
#SPJ11
in a class, the teacher decides to assign groups of 3 individuals to work on a project. how many ways is this possible if there are 36 students in the class?
there are 7140 ways to form groups of 3 individuals out of 36 students.
To form a group of 3 individuals out of 36 students, we can use the combination formula:
C(36, 3) = 36! / (3! (36 - 3)!) = 36! / (6! 30!) = (36 × 35 × 34) / (3 × 2 × 1) = 7140
what is combination ?
In mathematics, combination refers to the selection of a subset of objects from a larger set, without regard to the order in which the objects appear. The number of possible combinations is determined by the size of the larger set and the size of the subset being selected.
To learn more about combination visit:
brainly.com/question/19692242
#SPJ11