Tamaya purchased an ordinary annuity that earns 3. 5% interest. She will receive 20 payments of $700, once a quarter over 5 years.


What is the present value of the annuity?


A)$14,490. 00dollars


B) $3,160. 54 dollars


C) $12,792. 30 dollars


D) $15,227. 18

Please help me

Astronomers use the Hubble Constant (H) to estimate the age of the universe by relating it to the expansion rate of the universe.

The Hubble Constant represents the current rate of expansion of the universe, indicating how fast galaxies are moving away from each other. The age of the universe can be estimated by taking the inverse of the Hubble Constant, which provides an estimate of the time it would take for galaxies to move away from each other and reach their current distances. This is known as the Hubble Time. The formula for estimating the age of the universe using the Hubble Constant is:

Age of the universe = 1 / Hubble Constant

However, it's important to note that estimating the age of the universe based solely on the Hubble Constant is a simplified approach. Additional observations and measurements, such as the cosmic microwave background radiation and the abundance of light elements, are used in conjunction with the Hubble Constant to refine and improve the accuracy of the age estimation.

By combining various observations and measurements, astronomers are able to derive a more precise estimate of the age of the universe and gain insights into its evolutionary history.

Learn more about Hubble Constant here:

https://brainly.com/question/31458370

#SPJ11

When light passes through a pair of slits, it diffracts and produces a pattern of interference fringes on a screen. The number of bright interference fringes depends on the width of the slits and the wavelength of the light.

In this case, the light has a wavelength of λ = 595 nm and passes through a pair of slits that are 23 μm wide and 185 μm apart. The central diffraction maximum occurs when the two waves from the two slits interfere constructively, producing a bright fringe at the center of the pattern.
The position of the central diffraction maximum is given by the formula: d sin θ = mλ, where d is the distance between the two slits, θ is the angle between the direction of the light and the direction of the maximum, m is the order of the maximum, and λ is the wavelength of the light.
For the central maximum, m = 0 and sin θ = 0, so we have: d sin θ = 0 = mλ. This means that all wavelengths of the light will produce a bright fringe at the center of the pattern.
The number of bright interference fringes in the central maximum is given by the formula: N = (2d/λ)(w/D), where w is the width of the slits, D is the distance from the slits to the screen, and N is the number of fringes.
For the given values, we have: N = (2 × 185 × 10^-6)/(595 × 10^-9)(23 × 10^-6/1) ≈ 3. Therefore, there are 3 bright interference fringes in the central maximum.
The number of bright interference fringes in the whole pattern is given by: N = (2d/λ)(w/D) + 1. Since the central maximum has already been counted, we add 1 to the above formula to get: N = (2 × 185 × 10^-6)/(595 × 10^-9)(185 × 10^-6/1) + 1 ≈ 31. Therefore, there are 31 bright interference fringes in the whole pattern.

To know more about  central diffraction visit:

https://brainly.com/question/31785276

#SPJ11

There are approximately 379.27 moles of the monatomic ideal gas in the container.

Q = n * Cv * ΔT

where n is the number of moles of the gas.

initial temperature (T1) is 16°C and

the final temperature (T2) is 84°C.

The heat added (Q) is [tex]8.12 * 10^4 J.[/tex]

First, we need to calculate the change in temperature:

ΔT = T2 - T1 = (84 - 16) = 68 K (Note that the difference in temperatures in Celsius is the same as the difference in temperatures in Kelvin)

Now, let's plug the values into the equation and solve for the number of moles (n):

[tex]8.12 * 10^4 J = n * (3/2) * 8.314 J/(mol K) * 68 K[/tex]

Divide both sides by the heat capacity and the change in temperature:

[tex]n = (8.12 * 10 J) / ((3/2) * 8.314 J/(mol K) * 68 K)[/tex]

n ≈ 379.27 mol

So, there are approximately 379.27 moles of the monatomic ideal gas in the container.

Read more on monatomic ideal gas here: https://brainly.com/question/19719906

#SPJ4

In order to compare the reliability of the two networks in Fig. P7.1-10, we need to consider the failure probability of the links si and so, which is given as "peach". To compare the reliability of the two networks in Fig. P7.1-10, we need to consider the failure probability of links si and so. It is given that the failure probability of both links is peach.

In Network 1, the failure of link si will result in the failure of the entire network as there is no alternative path available. On the other hand, in Network 2, the failure of link si will not affect the network as there is an alternative path available through link s2. Similarly, in Network 1, the failure of link so will also result in the failure of the entire network as there is no alternative path available. However, in Network 2, the failure of link so will not affect the network as there is an alternative path available through link s3. Therefore, we can conclude that Network 2 is more reliable than Network 1 as it has alternative paths available in case of link failures. This means that even if one link fails, the network can still function, reducing the probability of complete network failure.

To know more about probability visit :-

https://brainly.com/question/31334609

#SPJ11

When an object is placed in front of a convex mirror at a distance larger than twice the magnitude of the focal length, the image will appear upright and reduced.

In this case, since the object is placed farther away from the mirror than twice the focal length, the image will be smaller than the object, or reduced. Additionally, since the image is virtual, it will be upright. I understand you need an explanation for the image formed when an object is placed in front of a convex mirror at a distance larger than twice the magnitude of the focal length of the mirror.

1. Convex mirrors always produce virtual, upright, and reduced images.
2. The distance of the object from the mirror doesn't impact the nature of the image in the case of a convex mirror.
3. Therefore, regardless of the object's distance from the mirror, the image will always be upright and reduced.

So, even if the object is placed at a distance larger than twice the magnitude of the focal length, the image formed by the convex mirror will still be upright and reduced.

To know more about convex mirror visit:-

https://brainly.com/question/31234954

#SPJ11

The separation d of the two slits is 9.23 x 10^-5 m

The problem involves a double slit experiment where a He-Ne laser of wavelength? = 600 nm shines through the double slit onto a screen located 1.00 m away from the slit. The distance on the screen between the m = 4 maxima and the central maximum of the two-slit diffraction pattern is measured and found to be 2.6 cm.

To find the separation d of the two slits, we need to use the formula for the distance between adjacent maxima in a double-slit diffraction pattern:

y = (mλL) / d

where y is the distance between adjacent maxima on the screen, m is the order of the maximum (m = 1 for the central maximum, m = 2 for the first maximum on either side of the central maximum, and so on), λ is the wavelength of the light, L is the distance from the slit to the screen, and d is the separation between the two slits.

We are given the values of y, m, λ, and L, and we need to solve for d. Rearranging the equation, we get:

d = (mλL) / y

Plugging in the values, we get:

d = (4 x 600 nm x 1.00 m) / 2.6 cm
d = 9.23 x 10^-5 m
To know more about double slit experiment, click here;

https://brainly.com/question/28108126

#SPJ11

Without any context or information about what these variables represent, it is impossible to classify the trajectory as safe or unsafe. Please provide more information about the variables and the situation in which they are being used.

However, generally speaking, the terms "safe" and "unsafe" refer to the level of risk or danger associated with a particular action or situation. If the trajectory involves potential harm or damage, it could be considered unsafe, while if it poses no risk, it could be considered safe. Ultimately, the determination of whether a trajectory is safe or unsafe depends on the specific circumstances and the potential consequences of following that trajectory.

Learn more about  determination here :

https://brainly.com/question/31755910

#SPJ11

Angular speed = (maximum emf)/(number of turns * magnetic flux density * area)

Angularcspeed [tex]= (24.0 mV)/(120 * 0.0750 T * 0.0256 m^2) = 40.4 rad/s[/tex]

The angular speed of the coil can be calculated using the formula for emf induced in a coil, which is equal to the rate of change of magnetic flux through the coil. In this case, the maximum emf and other parameters such as the number of turns, magnetic flux density, and area of the coil are given. Using the formula and substituting the values, we can calculate the angular speed of the coil, which turns out to be 40.4 rad/s. This means that the coil rotates at a rate of 40.4 revolutions per second.

Learn more about speed here :

https://brainly.com/question/28224010

#SPJ11

The respective horizontal and vertical components of the football are 7.47 m/s and 16.47 m/s. It can be calculated using trigonometry.

When an object is launched or thrown at an angle, we can break down its initial velocity into two components: the horizontal component and the vertical component.

The horizontal component of velocity determines the object's horizontal motion, while the vertical component of velocity determines the object's vertical motion.

The horizontal and vertical components of a football kicked with a speed of 18 m/s at an angle of 65° to the horizontal can be calculated using trigonometry.

The horizontal component can be found by multiplying the initial speed by the cosine of the angle:  horizontal component = 18 m/s x cos(65°) = 7.47 m/s.The vertical component can be found by multiplying the initial speed by the sine of the angle:  vertical component = 18 m/s x sin(65°) = 16.47 m/s.

To know more about trigonometry, refer here:

https://brainly.com/question/14272510#

#SPJ11

The value of R_0 to set the current l_o= 1 mA in the NMOS differential amplifier is 10 kOhm. The value of R_0 to set V_DSQ = 8 V is 4 kOhm.

To set the current l_o = 1 mA, the voltage V_GS1 must be equal to the voltage V_GS2. The voltage V_GS1 can be found as V_GS1 = V_DD - V_DS1 - V_T, where V_T is the threshold voltage of the transistor. Since V_DS1 is very small compared to V_DD, we can approximate V_GS1 as V_DD - V_T. Similarly, V_GS2 = V_DD - V_T. Hence, V_DSQ = V_DD/2 - V_T. The drain current is given by I_D = k_n[(V_DD - V_T - V_DSQ)/2]². Solving for R_0, we get R_0 = (V_DD - V_T - V_DSQ)/(2I_D) = 10 kOhm.

To set V_DSQ = 8 V, we need to set V_GS1 = V_GS2 = V_DD/2 - V_DSQ/2 - V_T. The drain current is given by I_D = k_n[(V_DD/2 - V_DSQ/2 - V_T)² - (V_DD/2 - V_T)²]. Solving for R_0, we get R_0 = (V_DD/2 - V_DSQ/2 - V_T)/√(2I_D/k_n) = 4 kOhm.

Learn more about voltage here:

https://brainly.com/question/32002804

#SPJ11

Boyle's law is a fundamental law of physics that describes the behavior of gases at a constant temperature. According to this law, the volume of a fixed quantity of gas is inversely proportional to the gas's pressure. This means that as the pressure of a gas increases, its volume decreases and vice versa.

To verify Boyle's law, we can perform an experiment using a simulation. In this experiment, we set the number of "Heavy" gas molecules to 100 and remove heat to set the temperature to 298 K. Then, we select "Temperature (T)" from the menu Hold Constant and measure the width of the container in nm.We can then set the width of the box by moving the adjustable wall of the container on the left side as given in the table. We note the corresponding pressure reading in atm.

It is important to note that the pressure of the container does not remain constant because the molecules exert pressure on the walls of the box. Therefore, we consider the average pressure of the container, which varies between 11.2 and 12.0 atm, to be 11.6 atm.By completing the table with our raw data for the pressure in the container at each width, we can plot a graph of volume versus the inverse of pressure (1/P) to verify Boyle's law.

The graph should show a linear relationship, which confirms that the volume of a fixed quantity of gas is indeed inversely proportional to its pressure at a constant temperature.Overall, this experiment demonstrates the importance of Boyle's law in understanding the behavior of gases and its practical applications in various fields of science and engineering.

For more such questions on Boyle's law
https://brainly.com/question/1696010

#SPJ11

The transverse strain is -0.00375 in./in.

Given:

Length of the metal bar (L) = 1.5 ft = 18 inches

Axial strain (ε) = 0.015 in./in.

Poisson's ratio (ν) = 0.25

Formula:

Transverse strain (ε_t) = -νε

Calculation:

Transverse strain (ε_t) = -0.25 x 0.015

ε_t = -0.00375

Therefore, the transverse strain is -0.00375 in./in.

Learn more about Transverse Strain.

brainly.com/question/19167627

#SPJ11

The speed of the satellite in a circular orbit around the earth at an altitude R above the earth's surface is √(gR/2).

The speed of the satellite can be found using the formula: v = √(GM/r), where G is the gravitational constant, M is the mass of the earth, and r is the distance between the satellite and the center of the earth.

In a circular orbit, r = R + h, where h is the altitude of the satellite above the earth's surface.

Using the equation for acceleration due to gravity, g = GM/(R^2), we can solve for M: M = gR^2/G. Substituting this into the formula for v, we get:

v = √(GM/(R+h)) = √(gR^2/(R+h))

Substituting R for h, we get:

v = √(gR^2/(2R)) = √(gR/2)

Therefore, the speed of the satellite in a circular orbit around the earth at an altitude R above the earth's surface is √(gR/2).

To learn more about speed, refer below:

https://brainly.com/question/28224010

#SPJ11

The rate of change of velocity is defined as acceleration. Acceleration usually indicates that the speed is changing, however this is not always the case. When an item goes on a circular course with a constant speed, it is still accelerating since its velocity direction changes.

The acceleration of a model car on an incline is given by a(t) = 2t/t^2 2, where t represents time. To simplify the expression, we can rewrite it as a(t) = 2/t.

This means that the acceleration of the car decreases as time increases. In other words, the car will accelerate quickly at first, but its acceleration will slow down over time. This can be seen graphically by plotting the function a(t) = 2/t, which will have a curve that approaches zero as t increases.

To know about Acceleration visit:

https://brainly.com/question/12550364

#SPJ11

Supernova 1987a demonstrated the creation of new elements by detecting the presence of radioactive isotopes that could only be formed through nuclear reactions occurring during the intense energy release of the supernova explosion.

Supernova 1987a provided evidence for the creation of new elements in supernova explosions through the detection of radioactive isotopes. When a massive star goes supernova, its core undergoes a cataclysmic collapse, leading to a powerful explosion. During this explosion, extreme temperatures and pressures trigger nuclear reactions, causing fusion and neutron capture processes. These processes generate heavy elements beyond iron, such as gold, platinum, and uranium. In the case of Supernova 1987a, the presence of radioactive isotopes, including nickel-56, cobalt-56, and titanium-44, was observed. These isotopes have short half-lives and can only be formed in the energetic environment of a supernova explosion, confirming the creation of new elements in such cosmic events.

Learn more about Supernova 1987a here:

https://brainly.com/question/13045846

#SPJ11

Applying direct differentiation to Ψ-e-ax² yields Ψ''=2α(2ax²-1), which shows that Ψ has points of inflection when 2ax²-1=0, or when x=±√1/2α.

These points correspond to the extreme positions of the particle's classical motion. This demonstrates the correspondence principle, which states that in the classical limit, the behavior of a quantum system should approach that of classical mechanics.

The presence of points of inflection indicates that the wave function changes concavity at the turning points of the classical motion, where the particle comes to a momentary stop before changing direction. This behavior is consistent with classical mechanics, where an object moving with simple harmonic motion changes direction at its turning points.

To know more about relative classical mechanics click on below link:

https://brainly.com/question/30697808#

#SPJ11

Two forces act on the brick: the force of gravity pulling it downward and the force exerted by your hand pushing it upward during acceleration.

When you are accelerating the brick upward, there are two forces acting on it. The first force is the force of gravity, pulling the brick downward towards the Earth. This force is proportional to the mass of the brick. The second force is the force exerted by your hand, pushing the brick upward to counteract gravity and accelerate it. This force is applied through contact with your hand and is equal in magnitude but opposite in direction to the force of gravity. These two forces, gravity pulling downward and your hand pushing upward, are the only forces acting on the brick during the upward acceleration.

Learn more about acceleration here:

https://brainly.com/question/2303856

#SPJ11

Before the two skaters pushed off from each other, their total momentum was zero. This is because the momentum of one skater going to the right (-85.0kgm/s) is exactly balanced by the momentum of the other skater going to the left (-65.0kgm/s).

According to the law of conservation of momentum, the total momentum of a closed system remains constant unless acted upon by an external force. In this case, the two skaters are the only objects in the system and they are pushing off from each other, but the total momentum of the system remains zero.

It is important to note that momentum is a vector quantity, meaning it has both magnitude and direction. The negative sign in front of the momentum values indicates the direction of the skaters' motion, with one going to the right and the other to the left. The magnitude of their momentum values (85.0kgm/s and 65.0kgm/s) tells us how difficult it would be to stop their motion if they were to collide with another object.

to know more about vector quantity click this link

brainly.com/question/21797532

#SPJ11

If the lid accidentally slips over the crucible, it will create a closed system. This can have several effects depending on what is being heated inside the crucible.

If the crucible contains a substance that requires oxygen for combustion, such as a metal, then the lack of air supply inside the closed system can prevent the substance from burning completely. This can result in incomplete combustion and the production of harmful gases.

On the other hand, if the crucible contains a substance that is being heated for a chemical reaction, the closed system can prevent the escape of any gases produced during the reaction. This can alter the reaction conditions and potentially affect the outcome of the experiment.

In any case, if the lid accidentally slips over the crucible, it is important to address the situation promptly to avoid any unwanted effects and ensure safe experimentation.

Your question is about the effect of a lid accidentally slipping over a crucible during an experiment.

The effect of a lid accidentally slipping over a crucible during an experiment may cause the following changes:

1. Change in mass: If you are conducting a mass measurement experiment, the additional mass of the lid might cause inaccurate results due to the increased weight.

2. Altered chemical reactions: The presence of the lid may affect the chemical reactions occurring inside the crucible, as it could limit the exposure to air or other gases, altering the conditions of the reaction.

3. Change in temperature: If the crucible is being heated, the lid might trap heat inside, causing a change in temperature and potentially affecting the experiment results.

4. Safety hazard: If the lid is not intended to be used with the crucible, it could pose a safety risk due to improper fitting, breakage, or release of gases.

To correct these changes, carefully remove the lid from the crucible and continue with the experiment according to the instructions, making note of the incident in your lab report.

To know more about Crucible visit:

https://brainly.com/question/355513

#SPJ11

In this scenario, star A's habitable zone would generally be farther away than star B's habitable zone due to the higher luminosity of star A.

The habitable zone of a star is the region around the star where conditions are potentially suitable for the existence of liquid water on the surface of a planet. It is determined by the star's temperature and luminosity.

In this scenario, since star A emits twice as much heat and light as star B, it means that star A has a higher luminosity than star B. Luminosity refers to the total amount of energy radiated by a star per unit time.

The habitable zone of a star is generally located at a distance where the energy received from the star allows for the possibility of liquid water. The boundaries of the habitable zone depend on various factors, including the star's luminosity.

With star A having a higher luminosity, its habitable zone would typically be farther away compared to star B's habitable zone. This is because the higher luminosity of star A results in greater energy output, and to maintain suitable temperatures for liquid water, planets in its habitable zone would need to be located at greater distances where the energy received is balanced.

On the other hand, star B, with lower luminosity, would have a habitable zone that is relatively closer to the star since it emits less energy. Planets in star B's habitable zone would need to be closer to receive enough energy for liquid water to exist.

To know more about luminosity, please click on:

https://brainly.com/question/32108873

#SPJ11

The value of the inductor and resistor if they are in series then the resistor value is 10Ω and the inductor value is 0.5 H.

The network's admittance is approximately 0.0196 S.

a. To find the values of the inductor (L) and resistor (R) in a series network with an equivalent impedance of Zeq = (10 + j50)Ω at 100 rad/s, we can use the following relationships:

Zeq = R + jωL
where ω is the angular frequency, which is given as 100 rad/s.

Comparing the real and imaginary parts of the impedance, we have:
R = 10Ω (real part)
ωL = 50Ω (imaginary part)

To find the inductor value, we can rearrange the formula for the imaginary part:
L = 50Ω / 100 rad/s = 0.5 H

So, the resistor value is 10Ω and the inductor value is 0.5 H.

b. To find the admittance (Y) of the network, we can use the following formula:

Y = 1 / Zeq

First, find the magnitude of the impedance:
|Zeq| = √(10² + 50²) = √2600 = 50√(1.04) ≈ 51.02Ω

Now, calculate the admittance:
Y = 1 / 51.02Ω ≈ 0.0196 S

So, the network's admittance is approximately 0.0196 S.

To learn more about inductor  visit: https://brainly.com/question/4425414

#SPJ11

The ratio of refractive indices na/no in terms of x is 1/x, where x is the ratio of the speed of light in substance A to the speed of light in substance B.

To find the ratio na/no in terms of x, we first need to understand the relationship between the speed of light and the refractive index of a substance. The refractive index (n) of a substance is defined as the ratio of the speed of light in a vacuum (c) to the speed of light in the substance (v). Therefore, we can express this relationship as n = c/v.

Now, let's consider substance A and substance B. We know that the speed of light in substance A is x times greater than the speed of light in substance B. This means that vA = x vB. Using the refractive index formula, we can write:
nA = c/vA
nB = c/vB

Substituting vA = x vB into the equation for nA, we get:
nA = c/(x vB)

Dividing this by the equation for nB, we get:

na/no = (nA/nB) = (c/vA)/(c/vB) = vB/vA = 1/x

Therefore, the ratio na/no in terms of x is 1/x.

In summary, the ratio of refractive indices na/no in terms of x is 1/x, where x is the ratio of the speed of light in substance A to the speed of light in substance B.

To know more about refractive index visit:

https://brainly.com/question/30761100

#SPJ11

The rate of change of current is given by the formula:

[tex]$$\frac{dI}{dt} = \frac{E}{L}$$[/tex]

where $E$ is the emf and $L$ is the inductance of the solenoid. Plugging in the given values, we get:

[tex]$$\frac{dI}{dt} = \frac{-12.5 \text{mV}}{0.285 \text{mH}} \approx -43.86 \text{A/s}$$[/tex]

Therefore, the rate of change of current at that specific time is approximately -43.86 A/s.

The rate of change of current in a solenoid is determined by the emf induced in the solenoid and the inductance of the solenoid. The emf induced in a solenoid is given by Faraday's Law, which states that the emf is proportional to the rate of change of the magnetic flux through the solenoid. The inductance of the solenoid depends on the geometry of the solenoid, which is given by its length and cross-sectional area. The formula for the rate of change of current is derived from the equation that relates the emf, the inductance, and the rate of change of current in an ideal solenoid. Plugging in the given values into this formula gives us the rate of change of current at that specific time.

Learn more about Faraday's Law here:

https://brainly.com/question/1640558

#SPJ11

The wavelength at which this star's spectrum peaks in brightness is approximately 5420 angstroms.

The wavelength at which a star's spectrum peaks in brightness is determined by its surface temperature. In this case, the star has a surface temperature of 5350 K. To determine the wavelength at which its spectrum peaks, we need to use Wien's law, which states that the peak wavelength is inversely proportional to the temperature.

The formula for Wien's law is:

λ(max) = 2.898 x 10^-3 mK / T

where λ(max) is the peak wavelength in meters, T is the temperature in Kelvin, and 2.898 x 10^-3 mK is the Wien's constant.

To convert meters to angstroms, we can multiply the result by 10^10.

Plugging in the given temperature of 5350 K, we get:

λ(max) = 2.898 x 10^-3 mK / 5350 K
λ(max) = 5.42 x 10^-7 meters

Multiplying by 10^10 to convert to angstroms, we get:

λ(max) = 5420 angstroms

To know more about spectrum peaks visit:-

https://brainly.com/question/31522266

#SPJ11

In a standing wave, the point where the water remains at a constant level is called the "node," and the points of maximum water-level change are called the "antinodes."

In a standing wave, the water oscillates between constructive and destructive interference. The nodes are the points where the water remains at a constant level, indicating destructive interference. These points experience minimal displacement and remain relatively stationary. In contrast, the antinodes are the points of maximum displacement and experience the greatest change in water level. These points occur at the peaks and troughs of the wave, indicating constructive interference. Together, nodes and antinodes create the characteristic pattern of a standing wave.

learn more about antinodes here:

https://brainly.com/question/30640087

#SPJ11

The third charge is -18 nC. The negative sign of q3 indicates that it has an opposite charge to the other two particles.

The electric potential energy of the three charged particles is zero because the particles are arranged in a way that the forces between them cancel out.

To solve this problem, we can use the formula for electric potential energy: U = k * (q1 * q2 / r12 + q1 * q3 / r13 + q2 * q3 / r23)

where U is the electric potential energy, k is Coulomb's constant, q1, q2, and q3 are the charges of the particles, and r12, r13, and r23 are the distances between the particles.

Since the electric potential energy of the three charged particles is zero, we can write: 0 = k * (4.5 * q2 / r12 + q3 * 4.5 / r13 + q2 * q3 / r23) and 0 = k * (9.0 * q1 / r12 + q3 * 9.0 / r23 + q1 * q3 / r13)

We also know that the triangle is equilateral, so r12 = r13 = r23 = 2.0 cm. Substituting the distances and charges into the equations and simplifying, we get: 0 = 4.5q2 / 2 + q3 * 4.5 / 2 + q2 * q3 / 2, 0 = 9.0q1 / 2 + q3 * 9.0 / 2 + q1 * q3 / 2

Solving for q3 in either equation gives: q3 = - 9q1 - 9q2 / 4.5. Substituting q1 = q2 = 4.5 nC gives: q3 = -18 nC. Therefore, the third charge is -18 nC.

To know more about potential energy, refer here:

https://brainly.com/question/15764612#

#SPJ11

The maximum speed of the photoelectrons in part a can be calculated using the classical physics formula for kinetic energy (KE) which is KE = 1/2 mv^2.

The maximum kinetic energy of the photoelectrons is given by the energy of the incident photon minus the work function of the metal. In part a, the incident photon has an energy of 4.0 eV and the work function of the metal is 2.3 eV. Therefore, the maximum kinetic energy of the photoelectrons is 1.7 eV. To convert this energy to joules, we can use the conversion factor of 1 eV = 1.6 x 10^-19 J. So, 1.7 eV = 2.72 x 10^-19 J.
Next, we can use the formula for kinetic energy to solve for the maximum speed of the photoelectrons. Rearranging the formula to solve for velocity (v), we get:

v = sqrt(2KE/m)
Substituting the values for KE and m, we get:
v = sqrt((2 x 2.72 x 10^-19 J) / 9.11 x 10^-31 kg)
Simplifying this equation gives us:
v = 6.24 x 10^5 m/s

To know more about kinetic energy visit:-

https://brainly.com/question/999862

#SPJ11

The speed of the electron is six times the speed it would have if it had classical momentum. To find the actual speed, we would need to know the mass of the electron and the classical momentum, but we can conclude that the electron is moving very fast!

To find the speed of the electron, we need to first understand what is meant by "classical momentum." Classical momentum is the product of an object's mass and velocity. In this case, the electron's classical momentum would be its mass multiplied by its velocity. However, we are given that the electron's momentum with magnitude is six times its classical momentum.
This means that the electron's actual momentum is six times larger than what would be expected based on its mass and velocity. To find the speed of the electron, we can use the equation for momentum: p = mv, where p is momentum, m is mass, and v is velocity.
Let's say the classical momentum of the electron is p_c. Then, we can write the equation for the electron's actual momentum as p = 6p_c. Since the mass of the electron is constant, we can solve for the velocity by dividing both sides of the equation by the mass:
p/m = 6p_c/m
v = 6v_c
where v_c is the velocity corresponding to the classical momentum p_c.
To know more about electron visit:

https://brainly.com/question/1255220

#SPJ11

Full moon. A full moon is seen high in the south at dawn. During a full moon, the moon is on the opposite side of the Earth from the Sun, and it rises as the Sun sets.

Reaching its highest point in the sky around midnight. At dawn, the full moon would still be visible high in the south before it starts to set in the west. The full moon is easily recognizable due to its bright, fully illuminated disk. The position of the moon in the sky changes throughout its monthly cycle, and its visibility also varies depending on the time of day. At dawn, the moon is typically visible in the western sky, close to the horizon. However, during a full moon, the moon is directly opposite the Sun, making it visible throughout the night and high in the sky at dawn. As the Sun rises in the east, the full moon can still be seen in the southern part of the sky before it eventually sets in the west.

learn more about moon here:

https://brainly.com/question/30653068

#SPJ11

The velocity of the particle is given by v = 3t - 2t^2 m/s. To find the position x of the particle at time t = 10 seconds, we need to integrate the velocity function:

x = ∫(3t - 2t^2) dt

x = (3/2)t^2 - (2/3)t^3 + C

where C is the constant of integration. We can determine C by using the initial condition x = 0 when t = 0:

0 = (3/2)(0)^2 - (2/3)(0)^3 + C

C = 0

Therefore, the position of the particle after 10 seconds is:

x = (3/2)(10)^2 - (2/3)(10)^3 = 150 - 666.67 = -516.67 m

Note that the negative sign indicates that the particle is 516.67 m to the left of its initial position.

To know more about particle refer here

https://brainly.com/question/2288334#

#SPJ11