the branch circuit conductors for a 5 hp, 230V, single-phase motor with a nameplate rating of 25 A must have an ampacity of ___________ or greater.

Answer:

0.00337339236

Answer:

Hey there! 16 divided by 4743 is approximately equal to 0.003366. This means that if you take 16 and divide it by 4743, the result will be a number that is very close to 0.003366. This division problem can be written as the fraction 16/4743, or as the decimal 0.003366.

________________________________________________________

Some common mistakes to avoid when solving division problems include forgetting to carry the remainder, failing to check for divisibility, and mixing up the order of the dividend and the divisor. It is also important to pay attention to the units of measurement and to ensure that the units in the dividend and the divisor are compatible.

Some strategies for solving division problems with large numbers include using place value to break down the numbers into smaller units, using long division or a calculator to perform the division, and using estimation to check the reasonableness of the answer. It can also be helpful to use mental math techniques, such as rounding, to simplify the division problem. Other strategies might include using division to find the prime factorization of a number or to identify common factors or multiples.

For gas piping other than black or galvanized steel installed in a concealed location, where a bored hole is located a maximum of 1/2 inch from the edge of the wood member.

What is galvanized steel?
Galvanized steel is a type of steel that has been treated with a layer of zinc oxide to protect it from corrosion. This layer is bonded to the steel so that it will not flake or peel off. Galvanized steel is often used in the construction industry because it is highly resistant to rust and other forms of corrosion. It is also used in the automotive and appliance industries as well as in the production of water pipes, fencing, and other metal items. Galvanized steel is cost-effective and easy to maintain, making it a popular choice for many applications. It is also environmentally friendly since it does not require the use of chemicals or paints. Galvanized steel is a durable and versatile material that is essential for many projects.

To learn more about galvanized steel
https://brainly.com/question/14835168

#SPJ4

The velocity of the cylinder when it moves downward s = 0.2m from its equilibrium position is; 1.55 m/s

At the equilibrium position, since;

F_sp = kx₀

We are given kAB = 120. Thus;

F_sp = 120x₀

Resolving forces about the y-axis gives;

∑f_y = 0, we have;

120x₀  - 4(9.81) = 0

x₀ = (6 * 9.81)/120

x₀ = 0.4905 m

Thus, when the 60 N force is applied, the compression of the spring is;

x = s + 0.4905 m

Thus;

F_sp = 120(s + 0.4905 m)

Then balancing of upward and downward forces gives us;

120(s + 0.4905) − 60 − 6(9.81) = 6(−a)

120s - 60 = -6a

a = 10 - 20s

At the initial condition v=0 at s = 0, we integrate to get the velocity;

v²/2 = 10s - 20s²

v = √(20s - 40s²)

At s = 0.2 m, we have;

v = √(20(0.2) - 40(0.2)²)

v = 1.55 m/s

Read more about Velocity of Cylinder at; https://brainly.com/question/9485953

#SPJ1

Technician A is the correct answer. He is correct in saying that after an accident, you should take precautions to avoid it happening again in the future.

First, look for any injuries. If someone is in pain, take care of them.

After that, move your car to a safer location where you can exchange names, addresses, phone numbers, vehicle identification numbers, vehicle license plate numbers, insurance information, and driver's license information.

Finally, take note of the crash site and obtain the names, addresses, and phone numbers of any witnesses. If the vehicles cannot be moved, set up flares or raise your hood to protect the scene.

To know more about vehicle accidents, visit:

brainly.com/question/1235714

#SPJ4

__________________________________________________________

Hello! In this question, I will answer the first part of the question, in which we will determine the x, y, and z components for the reaction at joint A in the ball-and-socket.
__________________________________________________________

Explanation:

To better understand what the question entails, we will start off by drawing the free-body diagram to understand the direction of our components. The image is attached below. This will help us solve for our components.

__________________________________________________________

Solve:

To start, we will first solve for the weight of the sign, we will use the formula:

[tex]W=mg[/tex]

Whereas:

Plug in our values into the formula and solve:

[tex]W = 90\cdot9.81=882.9 N[/tex]

Since we now know our weight value, we can solve for our force in the cable BC, expressed as a vector. We will use the formula:

[tex]\bold{T}_{BC}=T_{BC}(\frac{\bold{r}_{BC}}{r_{BC}})[/tex]

Where:

Plug in our values into the formula and solve:

[tex]\bold{T}_{BC}=T_{BC}\bigg(\cfrac{\text{[i - 2j+ 2k] ft}}{\sqrt{(1)^2+(-2)^2+(2)^2}}}\bigg)\\\\\bold{T}_{BC}=T_{BC}\bigg(\cfrac{\text{[i - 2j+ 2k] ft}}{3}}}\bigg)\\\\\text{Simplify}\\\\\bold{T}_{BC}=\frac{1}{3}T_{BC}{\text{i}}-\frac{2}{3}T_{BC}j+\frac{2}{3} T_{BC}k[/tex]

Now, let us solve for our force in the cable BD, also expressed as a vector. Use the formula:

[tex]\bold{T}_{BD}=T_{BD}(\frac{\bold{r}_{BD}}{r_{BD}})[/tex]

Use the same steps from solving for our vector force of cable BC. Plug in the values and solve:

[tex]\bold{T}_{BD}=T_{BD}\bigg(\cfrac{\text{[-2i - 2j+ k] ft}}{\sqrt{(-2)^2+(-2)^2+(1)^2}}}\bigg)\\\\\bold{T}_{BD}=T_{BD}\bigg(\cfrac{\text{[-2i - 2j+ k] ft}}{3}}}\bigg)\\\\\text{Simplify}\\\\\bold{T}_{BD}=-\frac{2}{3}T_{BD}{\text{i}}-\frac{2}{3}T_{BD}j+\frac{1}{3} T_{BD}k[/tex]

We now need to find the moment at A at equilibrium (0). This is known as:

[tex]\sum M_{a}=0 \Rightarrow\bold{r}_{B}\times(\bold{T}_{BC}+\bold{T}_{BD}+\bold{W})=0[/tex]

Whereas:

Plug in values into the equation:

[tex]2\text{j}\times\big[\big(\frac{1}{3}T_{BC}{\text{i}}-\frac{2}{3}T_{BC}j+\frac{2}{3} T_{BC}k\big)+\big(-\frac{2}{3}T_{BD}{\text{i}}-\frac{2}{3}T_{BD}j+\frac{1}{3} T_{BD}k\big)\big]\\+\text{j}\times-882.9\text{k}=0[/tex]

Find the moment about the z-axis to zero. This is known as:

[tex]\sum M_{z}=0\\\\-\frac{2}{3}T_{BC}+\frac{4}{3}T_{BD}=0\\\\\text{Simplify}\\\\T_{BC}=2T_{BD}[/tex]

Now, find the moment about the x-axis to zero. This is known as:

[tex]\sum M_{x}=0\\\\\frac{4}{3}T_{BC}+\frac{2}{3}T_{BD}-882.9=0\\\\\text{We know }T_{BC}=2T_{BD}\text{, plug in }2T_{BD}\text{ in }T_{BC}\\\\\frac{4}{3}\times2T_{BD}+\frac{2}{3}T_{BD}-882.9=0\text{ Solve for }T_{BD}\\\\\frac{10}{3}T_{BD}=882.9\\\\T_{BD}=264.87\text{ N}[/tex]

Now, let us calculate the tension in wire BC.

[tex]T_{BC}=2T_{BD} = 2(264.87) = 529.74\text{ N}[/tex]

Let us calculate the reaction at A by solving for the equilibrium force equation. The formula is:

[tex]\sum F=0\\\\\bold{F}_A+\bold{T}_{BC}+\bold{T}_{BD}+\bold{W}=0[/tex]

Plug in our known information into the equation and simplify.

[tex]\big[(A_xi+A_yj+A_zk)+(\frac{1}{3}T_{BC}{\text{i}}-\frac{2}{3}T_{BC}j+\frac{2}{3} T_{BC}k)+(-\frac{2}{3}T_{BD}{\text{i}}-\frac{2}{3}T_{BD}j\\+\frac{1}{3} T_{BD}k)-981\text{k}\big]=0\\\\\text{Separate by component}\\\\\big[(A_x+\frac{1}{3}T_{BC}-\frac{2}{3}T_{BD})\text{\bold{i}}+(A_y-\frac{2}{3}T_{BC}-\frac{2}{3}T_{BD})\text{\bold{j}}+(A_z+\frac{2}{3}T_{BC}+\frac{1}{3}T_{BD}\\-981)\text{\bold{k}}\big]=0\\\\\text{Plug in known values}\\[/tex]

[tex]\big[(A_x+\frac{1}{3}\times529.74-\frac{2}{3}\times264.87)\text{\bold{i}}+(A_y-\frac{2}{3}\times529.74-\frac{2}{3}\times264.87)\text{\bold{j}}+(A_z+\frac{2}{3}\times529.74+\frac{1}{3}\times264.87-882.9)\text{\bold{k}}\big]=0[/tex]

Now, we can calculate our reactions.

Calculate the reaction at A in the x-direction.

[tex]\sum F_x=0\\\\A_x+\frac{1}{3}\times529.74-\frac{2}{3}\times264.87=0\\\\\boxed{A_x=0\text{ N}}[/tex]

Calculate the reaction at A in the y-direction.

[tex]\sum F_y=0\\\\A_y-\frac{2}{3}\times529.74-\frac{2}{3}\times264.87=0\\\\A_y-529.74=0\\\\\boxed{A_y=529.74\text{ N}}[/tex]

Calculate the reaction at A in the z-direction.

[tex]\sum F_z=0\\\\A_z+\frac{2}{3}\times529.74+\frac{1}{3}\times264.87-981=0\\\\A_z-441.45=0\\\\\boxed{A_z=441.45\text{ N}}[/tex]

__________________________________________________________

Answer:

[tex]\boxed{\text{A=} < \text{0, 529.74, 441.45} > }[/tex]

__________________________________________________________

Answer:

s = 6.6

-25 + 5 × 6.6 = 8

Just let me know if you need any more help.

Graphic designers and UI/UX designers are more likely to work for Jasmine. A member of her team.

The building and maintenance of websites require a variety of skills and disciplines known as web design. Among the many components of web design are search engine optimization, user interface design (UI design), authorship, which includes standardized code and custom software, and web graphic design. Even while some designers manage every step of the design process, it is typical for many people to collaborate in teams to handle different areas. Web design is sometimes used to describe the process of designing a website's front-end (client side) design, which involves authoring HTML. Web design and web engineering partially overlap within the broader context of web development.

Learn more about Web design here:

https://brainly.com/question/15420719

#SPJ4

Answer: the bottom is a harder material than, the actual w33d inside it

Explanation:

The mass of sugar cane being fed to the process with this flowrate is 0.0014 kg/s.

Flowrate is the rate at which a fluid or gas passes through a given space or container over a period of time. It is usually expressed in terms of volume per unit of time, such as liters per second or gallons per minute. Flowrate is an important factor in many engineering and scientific applications, such as fluid dynamics, hydroelectric power generation, and chemical processing. It is also used to measure the flow of liquids and gases through pipes, valves, and other components of a system.

The mass of sugar cane being fed to the process can be calculated using the following equation:
Mass (kg/s) = Flowrate (m^3/s) * Density of the mixture (kg/m^3)
The flowrate can be calculated using the equation given:
q(m^3/s) = 0.0307 m^3/hr atm^1/2 √ Pmanometer
Therefore, the flowrate is:
q(m^3/s) = 0.0307 m^3/hr * (atm^1/2 * (6.3 in/12 in/ft)^1/2)
q(m^3/s) = 0.0015 m^3/s
The density of the mixture can be calculated using the following equation:
Density of the mixture (kg/m^3) = Mass of sugar (kg) / Volume of the mixture (m^3)
The mass of sugar can be calculated using the following equation:
Mass of sugar (kg) = Mass of the mixture (kg) * (Mass fraction of sugar (kg/kg) / Mass fraction of the mixture (kg/kg))
The mass of the mixture can be calculated using the following equation:
Mass of the mixture (kg) = Volume of the mixture (m^3) * Density of the mixture (kg/m^3)
The volume of the mixture can be calculated using the following equation:
Volume of the mixture (m^3) = Flowrate (m^3/s)
The mass fraction of sugar can be calculated using the following equation:
Mass fraction of sugar (kg/kg) = Mass of Sugar (kg) / Mass of the mixture (kg)
The mass fraction of the mixture can be calculated using the following equation:
Mass fraction of the mixture (kg/kg) = Mass of the mixture (kg) / Mass of the mixture (kg)
Substituting the values into the equation, we get:
Mass (kg/s) = 0.0015 m^3/s * (0.91 kg/m^3)
Mass (kg/s) = 0.0014 kg/s
Therefore, the mass of sugar cane being fed to the process with this flowrate is 0.0014 kg/s.

To learn more about flowrate
https://brainly.com/question/14291335
#SPJ4

After considering ϕϕ simply as a function, its domain is ⇒  [-4 , ∞).

When one or more functions and their derivatives are included in a mathematical equation, it is referred to as a differential equation. A function's derivatives at a given point determine how quickly the function will change.

Physicists, engineers, and biologists use it most frequently. Differential equations are primarily used to analyse solutions that satisfy the equations as well as the characteristics of the solutions. The differential equation can be solved in a variety of ways, but one of the simplest is by using explicit formulas.

y = x + 6√(x + 4)

⇒  y' = 1 + 6[ 1/(2√(x + 4))]      since d/dx xn = nxn-1 , d/dx √x = 1/(2√x)

⇒  y' = 1 + 3/√(x + 4)

(y -x)y' = (6√(x + 4))(1 + 3/√(x + 4)) = 6√(x + 4) + 18

y-x+18 = 6√(x + 4) + 18

ϕ(x) = x + 6√(x + 4)

Domain ⇒  x + 4 >= 0 ⇒  x >= -4

⇒ Domain ⇒  [-4 , ∞)

Learn more about Domain

https://brainly.com/question/28135761

#SPJ4

It is TRUE that the Tactical ventilation should be performed only when the fire attack hoselines and teams are ready to advance toward the fire.

What is Tactical ventilation?

Through purposeful flow path management, the overarching goal of all forms of tactical ventilation is to improve interior tenability for occupants and firefighters.

Flow path management for control and extinguishment is best accomplished by placing ventilation openings as close to the source fire as possible (e.g., not in a remote location) and working in collaboration with the fire attack team (e.g., vent ahead of rather than behind the attack team).

Firefighters must constantly control their environment with hose stream techniques when using ventilation tactics and interior attack to cool and dilute the highly combustible smoke.

To know more about Tactical ventilation, visit: https://brainly.com/question/27841064

#SPJ4

A 2 HP, 120 V, single phase motor requires a 20 ampere inverse time circuit breaker branch circuit short circuit and ground fault protective device.

What is circuit?
A circuit is an electrical path between two or more points that allow electricity to flow. It consists of various components like resistors, capacitors, transistors, diodes, and wires. Each component serves as a building block to create a functioning circuit. Circuits are used to control and direct electricity to power a variety of devices like computers, televisions, radios, and more. They are at the heart of any electrical system, from the most simple to the most complex. By properly combining the components in a circuit, electricity can be directed to flow in the desired manner and perform the required tasks. Circuit design is an important engineering field and can be used to create many practical applications.

To learn more about circuit
https://brainly.com/question/30018555

#SPJ4

Answer:

Lighting track is not permitted to be installed within a zone extending 3 feet horizontally and 8 feet vertically from the top of a bathtub rim.

Explanation:

The process of creating sugar from raw sugar cane involves several steps. First, the raw cane is passed through a series of crushers to extract the juice from the cane.

A crusher is a machine designed to reduce large rocks into smaller rocks, gravel, or rock dust.

This step also adds about 5% extra mass of water to the sugar cane to help with the extraction process. The crushed cane and liquid juice are then sent to a filter press, which creates a cake containing 4% of the weight of the cane juice. This cake has a composition similar to the overall non-fiber content of the raw cane. The filtrate is then sent to an evaporator, where enough water is evaporated to obtain a pale yellow juice that is 41% water. Finally, the liquid is crystallized to produce sugar crystals, which are typically about 99.8% sucrose.

To learn more about crusher
https://brainly.com/question/15352898
#SPJ4

You must listen to all of the lesson's audio before you can take the exam. This is the appropriate assertion.

Students will be able to build deeper and longer lasting knowledge and a deeper comprehension of the scientific method through carefully planned laboratory exercises that emphasize inquiry-based or problem-based learning with attention to active learning under appropriate supervision.

Supporters of this method of learning assert that learning by ear enables one to be adaptable when carrying out a variety of jobs. This is due to the fact that information can be processed without the need of hands or eyes by simply listening to audio recordings.

To learn more about laboratory exercise visit:

brainly.com/question/26264658

#SPJ1

The ionic radius of Ca²⁺ is 100 pm, K⁺ is 138 pm, Cl⁻ is 181 pm, and S²⁻ is 184 pm, therefore option d is the right choice.

The influence of an ion's nucleus on its electron cloud extends outward to a distance called the ionic radius.

When an atom loses or gains an electron, an ion is created. A cation is formed when an atom loses an electron, and an anion is formed when an atom gains an electron. The ionic radius is the furthest point away from the ion's nucleus that its outermost shell can extend.

A cation's atomic size will be lower than that of its parent atom. Compared to its parent atom, an anion is comparatively large. That's because the net effective nuclear charge gets drowned out by the repulsion between electrons caused by an atom gaining electrons.

Want to know more about ionic radius visit the link which is given below;

https://brainly.com/question/6637706

#SPJ4

The velocity of point A on the rim of the gear at the instant shown is 39.8°.

Velocity is the directional speed of a moving object as an indication of its rate of change in location as perceived from a specific frame of reference and measured by a specific time standard.

Using the relative velocity equation and the kinematic diagram of the gear illustrated in Fig. a, apply the relative velocity equation to points B and C.

Va = Vc + w x r A/C

Va = 4i + (-3.11k) x ( -1.06i + 2.56j)

Va = 3.9665i + 3.2998j

Equating the i and j components yields and its direction:

[tex]tan^{-1} = \dfrac{3.2998}{3.9665} = 39.8^\circ[/tex]

Therefore, the velocity of point A on the rim of the gear at the instant shown is 39.8°

To learn more about velocity, refer to the link:

https://brainly.com/question/18084516

#SPJ1

The weight needed to hold the wall is equal to 14.9285 N.

The force equilibrium can be described as the addition of the forces about x, y, and z-axis will be equal to zero and the sum of the moment also equal to zero.

Given, the width of the wall, b = 10 m

The height of the water, d = 4 m

The height of the wall, l = 7m

The area of the wall, A = bd = 10(4) = 40 m²

The expression of the centroid of the wall,  [tex]\displaystyle \bar x = \frac{d}{2}[/tex]

[tex]\displaystyle \bar x = \frac{4}{2} = 2 m[/tex]

The hydrostatic force, F = ρgAx

F = (1000) (9.81) (40) (2)

F = 784,000 N

The expression for  the moment of inertia: [tex]\displaystyle I_C =\frac{bd^3}{12}[/tex]

[tex]I_c = 10\times 4/12 = 53.34 m^4[/tex]

The relation of the center of the pressure gate can be written as:

[tex]\displaystyle \bar h = \bar x +\frac{I_C}{A\bar x}[/tex]

[tex]\bar h = 2 + \frac{53.34}{40\times 2} = 2.667 \; m[/tex]

The moment about point: l × W - F(d - h) = 0

Substitute the values in the above equation:

7 × W - 78400 (4 - 2.667) = 0

7 W = 78400 (4 - 2.667)

W = 14.92 kN

Learn more about force equilibrium, here:

https://brainly.com/question/29470719

#SPJ1

About 296.5 N of anchoring force is required to keep the elbow in place. About 134.8 is the direction of the anchoring force.

The speed of an object is its magnitude (or value), which is the velocity. The item is traveling in the direction indicated by the velocity vector. Imagine a circle (or, better yet, draw one) and an object traveling along the path it defines.

Units of mass times length over time squared are used to express the strength of a force. The most used unit in metric measurements is the newton (N), which is equal to one-kilogram times one meter over one second squared.

to know more about anchoring force here:

brainly.com/question/20824527

#SPJ1

Answer: true

Explanation:

Answer:

It is critical for the upper and lower end sections of an engine to work perfectly together because they are responsible for converting fuel into motion, which is necessary for the engine to operate effectively.

The upper end section of an engine includes the cylinder head and valves, which are responsible for controlling the flow of fuel and air into the engine. The lower end section of an engine includes the crankshaft, connecting rod, and pistons, which are responsible for converting the fuel's energy into rotational motion.

If the upper and lower end sections of an engine are not working perfectly together, it can lead to a variety of problems, including reduced engine performance, reduced fuel efficiency, and increased emissions. It is therefore critical for the upper and lower end sections to be carefully designed and calibrated to work together seamlessly in order to ensure the optimal performance of the engine.

gove it to me. I'll do my best

You would expect each of the following to have a lower p50 qualitative effect on hemoglobin (5 pts) a) Raising the pH from 7.0 to 7.4.

On the forecasts, there is a "qualitative influence." Reliability and accuracy are two characteristics of forecasts. The dependability or accuracy of the forecasts may improve or worsen, depending on the qualitative effect.

Acitric Acids As an illustration, amino acid monomers make up proteins. A functional protein is created by folding a chain of linked polypeptides into a three-dimensional (3D) structure.

To know more about qualitative effect on hemoglobin visit :-

https://brainly.com/question/30216819

#SPJ4

The principal of the loan that TMI Systems repaid was $90,000.

The formula to calculate the principal of a loan is P = L + I, where P is the principal, L is the loan amount, and I is the total interest paid over the duration of the loan.

In this case, we are given that the loan amount was 10% per year simple interest, which can be calculated by multiplying the principal by the interest rate (0.1) and the duration of the loan (5 years). Therefore, the total interest paid over the duration of the loan is P x 0.1 x 5 = $50,000.

We are also given the total amount repaid, which is the sum of the principal and the total interest paid. Therefore, we can calculate the principal by subtracting the total interest paid from the total amount repaid.

This gives us $140,000 - $50,000 = $90,000. As the principal must be a positive value, the principal of the loan is $90,000.

For more questions like Principal click the link below:

https://brainly.com/question/17960115

#SPJ4

The size of RHW copper conductors needed for this 3-phase, 240-volt load is 4/10 AWG.

Copper conductors are electrical wires composed of copper that are used to carry electrical currents. They are used in a variety of applications, including power generation and transmission, electronics, telecommunications, and consumer products. Copper is an ideal material for electrical conductors because it is highly conductive, durable, and cost-effective. Copper conductors are available in a range of sizes and shapes and are used in both residential and commercial settings.

This is based on the National Electrical Code (NEC) Table 310.15(B)(16), which states that the minimum size for a 196 ampere load is 4/10 AWG for three insulated conductors in an EMT conduit.

To learn more about copper conductors
https://brainly.com/question/14941254
#SPJ4

a) the directivity of the antenna is evaluated to be = 1.761db

b) radiation efficiency is evaluated to be  = 98.67%

c) reflection efficiency gain is evaluated to be =  68%

Resonance is the relatively large selective response of an object or a system to an external oscillatory force that causes it to vibrate in step or phase. First, acoustical systems like musical instruments and the human voice were studied for resonance.

The total range of resonance frequencies was discovered to be independent of mass, height, and mass-to-height ratio, ranging from 9 to 16 Hz.

Therefore, the correct options are: a) 1.761 db., b) 98.67%., c) 68%.

To learn more about resonant, refer to the link:

https://brainly.com/question/29547999

#SPJ1

The elevation of lowest point of the curve is 445.077 ft.

Height above or below the mean sea level is referred to as elevation. A map's elevation can be depicted either by labelling the precise elevations of specific points or by using contour lines, which link points of the same elevation. Topographic maps are depicted as having elevations.

Calculate rate of change of the curve as below:

[tex]$$\begin{aligned}r & =\frac{g_2-g_1}{L} \\& =\frac{2.5-(-4.0)}{\left(\frac{400}{100}\right)} \\& =1.625 \%\end{aligned}$$[/tex]

Calculate distance from PC to the lowest point as below:

[tex]$$\begin{aligned}X & =\frac{-g_1}{r} \\& =\frac{-(-4.0 \%)}{1.625 \%} \\& =2.462 \mathrm{ft}\end{aligned}$$[/tex]

Calculate the elevation of the lowest point of the curve as below:

[tex]$$\begin{aligned}Y & =Y_{P C}+g_1 X+\frac{r}{2} X^2 \\& =450\mathrm{ft}+(-4.0 \times 2.462)+\frac{1.625}{2}(2.462)^2 \\& =450\mathrm{ft}-9.848 \mathrm{ft}+4.925 \mathrm{ft} \\& =\mathbf{445.077} \mathrm{ft}\end{aligned}$$[/tex]

Thus, the elevation of lowest point of the curve is 445.077ft.

Learn more about elevation

https://brainly.com/question/29477960

#SPJ4

the battery and ODC input voltages, as well as the main parameters for the power source, fireworks, relays, anti-static resistances, etc. The statements below refer to the design and operation of the power sub-system on a spacecraft.

Solar panels on these spacecraft convert solar energy into the electricity they require for propulsion. The electricity generated by the solar panels is used to recharge a battery within the spacecraft. These batteries can power the spaceship even as it is traveling away from the sun.

The engine, temperature management, power and power distribution, attitude control, telemetry command and control, transmitters/antenna, computers/on-board processing/software, and structural components are only a few of the many subsystems that make up a spaceship bus.

To know more about spacecraft's subsystems visit:-

https://brainly.com/question/29610872

#SPJ1

The frequency the remote-pilot should use to monitor air traffic near an uncontrolled airport is the Common Traffic Advisory Frequency (CTAF).

What is air traffic?
Air traffic is the movement of aircrafts such as planes and helicopters in a certain area. This may include both civilian and military aircrafts. Air traffic is managed by air traffic controllers who are responsible for ensuring the safety of aircrafts by providing directions and instructions on the ground and in the air. They also inform pilots about the current weather conditions and ensure the proper separation of aircrafts from each other. Air traffic controllers must constantly monitor the positions and movements of aircrafts in their airspace and keep track of all the data related to their flight paths.

The CTAF is a frequency used by pilots and air traffic control to exchange information about aircraft operating in the vicinity of an airport.

To learn more about air traffic
https://brainly.com/question/29773821

#SPJ4