The dimples on a golf ball will increase the flight distance (as compared to a smooth ball of the same mass and material) because: they create turbulence in the airflow around the ball.
When a golf ball is hit, it creates a layer of high-pressure air in front of the ball and a layer of low-pressure air behind it.
The dimples on the ball disrupt the flow of air and create a turbulent boundary layer, which reduces drag by reducing the size of the wake region.
This allows the ball to fly farther and more accurately. The lift force acting on the ball is also increased due to the dimples.
This is because the turbulence caused by the dimples reduces the air pressure on the upper surface of the ball, thereby increasing the net upward force on the ball.
In summary, the dimples on a golf ball reduce drag and increase lift, allowing it to travel farther and more accurately than a smooth ball of the same mass and material.
To know more about "Pressure" refer here:
https://brainly.com/question/30638771#
#SPJ11
what makes magnets work
A 12 kg object speeds up from an initial velocity of 10 m/s north to a final velocity of 15 m/s north. Calculate the change in momentum
Answer:
60m/s
Explanation:
momentum = Mass × Velocity
Initial Momentum = 12 × 10
= 120
Final Momentum = 12×15
=180
Change in Momentum = 180 - 120
= 60m/s
Answer:
60Explanation:
formula for change in momentum = F =∆p/∆t
F∆t = ∆p
∆p = m(v - Vo)
∆p = 12(15-10)
=12(5)= 60
A 6kg bowling ball is rolled down the bowling lane with a force of 42N, what is the acceleration of the ball?
Answer:
7 m/s²
Explanation:
F= ma
A= F/m = 42/6 = 7 m/s²
Car manufacturers use radiation for which task? sealing windows drying paint cleaning tires lubricating engines
Answer: drying paint
Explanation:
From the options that are given in the question, we should note that car manufacturers use radiation for drying paint.
The radiation is vital as it keeps the car cool and also helps in the reduction if heat in the vehicle. The other options such as sealing windows, cleaning tires and lubricating engines aren't true as radiation isn't used for that purpose by the car manufacturers.
Answer:
drying paint
Explanation:
PLEASEEE HURRY!!
Can you tell me How the sun is responsible for all of the energy here on Earth?
Answer:
Explanation:
All of the energy from the Sun that reaches the Earth arrives as solar radiation, part of a large collection of energy called the electromagnetic radiation spectrum. Solar radiation includes visible light, ultraviolet light, infrared, radio waves, X-rays, and gamma rays.
A clock which has a brass pendulum beats second correctly when the temperature of
the room is 30°c. It gains the time 15.55 sec per day when the temperature of the
rooms falls to 10°C. Find the linear expansivity of brass.
Answer:
- 0.0481666 °C^-1
Explanation:
Linear expansivity of brass, α
α = (2T - 2T0) / T0.dt
T0 = 30°
dt = change in temperature = 30 - 10 = 20°C
T = 15.55 sec
α = (2*15.55 - 2*30) / 30*20
α = (31.1 - 60) / 600
α = - 28.9 / 600
α = - 0.0481666 °C^-1
Unlike Electromagnetic waves, Mechanical waves need a to
transfer energy
Are moons 1-4 waxing are waning ?
Answer:
I want to help you but i cant.
Explanation:
please provide a screenshot or photos of moons 1-4
Use the image to answer the question. Which process enables the boy to see
over the wall?
A.diffraction
B.interference
C.reflection
D.refraction
HELLO
İ THİNK D
WHY D?
BCUESE SEN COK MALSİN ZAAA DAHA TÜRCE BİLMİYON MK
A 2.0kg pendulum swings from point A of a height of 0.10m to a point B of the same height. The heights are relative to the lowerst height. What is the change in gravitational potential energy from A to B?
A 2.0 kg pendulum swings from point A of height yA = 0.10 m to point B of the same height. The heights are relative to the lowest height.
What is the change in gravitational potential energy from A to B?
Answer: 0 J
An 850 kg elevator is accelerating upwards at 3.0 m/s2. Calculate the tension in the cable.
Answer:
10880N
Explanation:
We are given that
Mass of elevator, m=850 kg
Acceleration, [tex]a=3m/s^2[/tex]
[tex]g=9.8m/s^2[/tex]
We have to find the tension in the cable.
We know that
When elevator is accelerating upward then tension in the cable
[tex]T=m(a+g)[/tex]
Using the formula
[tex]T=850(3+9.8)[/tex]
[tex]T=10880N[/tex]
Discuss how the motion of the stunt cyclist relates to the forces acting on the stunt cyclist during the collision
Answer:
hello your question is incomplete hence I will give you a general answer on how a stunt cyclist performs his stunts successfully
answer ;
The stunt cyclist trying to perform some sort of stunt with the bicycle will be faced with some forces like the static fiction between the tires of the bicycle and wall and also a centripetal force.
In order to overcome the centripetal force the minimal grip of the bicycle must be equal to the weight and the speed at which the cyclist must go can be represented as :
[tex]V_{min} = \sqrt{\frac{r.g}{u} }[/tex]
Explanation:
The stunt cyclist trying to perform some sort of stunt with the bicycle will be faced with some forces like the static fiction between the tires of the bicycle and wall and also a centripetal force.
In order to overcome the centripetal force the minimal grip of the bicycle must be equal to the weight and the speed at which the cyclist must go can be represented as :
[tex]V_{min} = \sqrt{\frac{r.g}{u} }[/tex]
where ; r = radius of the tunnel where the stunt is to be performed
g = gravitational speed
u = coefficient of static friction
What type of wave is this. I can figure it out
what is the resistance of an object that produces a current of a 6 A and has a voltage of 30
Answer:
this is the answer the required questions
hope you like this
True or false: Energy is everything and the whole universe is governed by energy
Answer:
True
Explanation:
I took the test
You have a working electrical parallel circuit with three light bulbs, then 1 bulb burns
out.
Describe how electric current flows through the parallel circuit after 1 of the 3 bulbs
burns out?
Answer:
but the answer should be no as if 3 bulbs are connected together if one burns out the whole circuit will stop .hope you understood
please mark me as brainlist
How are humidity and precipitation related?
A. When humidity is low, the chance of precipitation is high.
b.When humidity is high, the chance of precipitation is high.
c.When humidity is high, the chance of precipitation is low.
d.Changes in humidity do not cause precipitation.
Answer:
Relative humidity depends on the amount moisture actually in the air at some temperature to the amount of moisture that the air can hold.
For instance, at 25 deg C the air has a saturation pressure of 23.76 mm of Hg.
That means that if at that temperature the pressure of the water vapor in the air reaches 23.76 mm Hg then the air is 100% saturated.
I believe the standard air pressure at 25 deg C is 760 mm Hg.
Now if the pressure of the water vapor in the air is 1/2 * 23.76 = 11.88 mm then the air is 50% saturated and the relative hunidity is 50 %.
At 100% relative humidity rain occurs (the air can't hold any more water).
When humidity is high, the chance of precipitation is high. The correct answer is b. When humidity is high, the chance of precipitation is high.
The amount of moisture or water vapor in the air is referred to as humidity. Relative humidity is a common way to measure it since it shows how much moisture the air is holding relative to how much it could contain at a particular temperature.
Any type of water that falls from the atmosphere and makes it to the surface of the Earth is referred to as precipitation. Examples include rain, snow, sleet, and hail.
When humidity levels are high, there is a lot of moisture in the air, which increases the possibility that saturation will occur. Excess water vapor condenses into visible water droplets or ice crystals as the air gets saturated, creating clouds. Condensed moisture in the clouds eventually gains enough weight to return to Earth as precipitation.
Therefore, when humidity is high, the chance of precipitation is high. The correct answer is:
b. When humidity is high, the chance of precipitation is high.
To know more about humidity, click here:
https://brainly.com/question/28528740
#SPJ6
READ ALL PLEASE
So I have been giving away points
But now that i have a lot I shall do another points give away yes
Now hurry and add a answer :V
Answer:
can I have please I will follow u..............
water is used in car radiators as coolant because of
Water is used as a coolant in automobiles radiators because it has high specific heat capacity. So, it absorbs a large amount of heat for a degree rise in temperature.
If the total force acts in the opposite direction as the cabinet is sliding, the cabinet would
A) slow down
B) speed up
C) remains the same speed
D) slow down, change direction and then speed up going the other way
E) remains the same speed, but changes direction
Explain why the radiative zone of the sun is hotter than the corona of the sun
Answer: Because The spectra provided evidence to explain why the sun's atmosphere is so much hotter than its surface. ... Clear evidence now suggests that the heating mechanism depends on regular, but intermittent explosive bursts of heat, rather than on continuous gradual heating.
Explanation:
Identify the following as
Potential Energy or Kinetic Energy
1. A car in the driveway. Potential energy
2. Matt rolling down a hill. Kinetic energy
3. Katie and Leo kissing.
4. A battery on my desk.
5. The water just before it goes down a waterfall.
6. A lawnmower running.
7. Mrs. Rey yelling at you.
8.A toy
9.A table with a spread of food
10. The kids playing on the bus.
You have two lens A and B of focal length +50cm and -50cm respectively. The nature and power of the lenses respectively isa. Concave, -2 D ; Convex, +2 D b. Convex, +2 D; Concave, - 2 D
Answer:
Concave, +2D
Convex -2D
Explanation:
Power of a lens is the reciprocal of its focal length.
For lens of +50cm = 0.5m
Power of the lens = 1/0.5
Power of the lens = +2Dioptres
Since the focal length is positive, the lens is concave
For the lens of -50cm = -0.5m
Power = 1/-0.5
Power = -2D dioptres
Since the focal length is negative, the lens is convex
An object’s momentum includes its __________.
Answer: Momentum can be defined as "mass in motion
Explanation:
A beam of light has a wavelength of 5.06*10^ ^ 7m What is the frequency of the light?
Answer:
59.23499537
Explanation:
The Purpose Of Stretching Is :
A. To increase your flexibility
B.To increase your range of motion during workout
C.To increase blood flow to the muscles
D. All of the above
Answer:
all of the above are correct
Explanation:
hope it helps you
please mark me as brainlist
Can someone help me?in the phy
Answer:
so your answer is gonna be the first one which is A
Please help!!!!!!:>>>>>>
Answer: 6V
Explanation: parallel circuit, the voltage is the same for each resistor.
3. The only way to protect against the damage from a collision is to reduce the
by wearing what protective football gear?
some knee pads for soccer
The effect of collision during a soccer game can be minimized by wearing a shin protection gear called the shin guard.
The protection gear is usually worn in other to palliate the effect of collison during sporting activities.
As for football, the most vulnerable part of the body which is usually prone to damage during collision is the shin or knee.
Therefore, players often wear shin protection gear in other to minimize the risk of damage during collision.
Learn more :https://brainly.com/question/18519965
John is hiking and notices a small stream of water flowing down the side of the mountain. What part of the water cycle is John observing?
Question 3 options:
Runoff
Evaporation
Condensation
Precipitation
Answer:
A runoff
Explanation: A runoff is when frozen water melts so if it falls down a mouantan there probably melting ice hope this helps :} pls give brainlest
John is hiking and notices a small stream of water flowing down the side of the mountain. In this John is experiencing runoff of the water cycle. Thus, the correct option is A.
What is Runoff?Surface runoff is the flow of water which is occurring on the ground surface when there is excess rainwater, storm water, melt water, or other sources of water, which can no longer sufficiently rapidly infiltrate in the soil of the region.
Runoff occurs in the excessive rainwater and it saturates the ground surface. Rivers and lakes are the results of water runoff. There is some evaporation from the water runoff into the atmosphere however for the most part water in the rivers and lakes returns back to the oceans.
Therefore, the correct option is A.
Learn more about Runoff here:
https://brainly.com/question/2140871
#SPJ6