The lifting force, F, exerted on an airplane wing varies jointly as the area, A, of the wing's surface and the square of the plane's velocity, v. The lift of a wing with an area
of 280 square feet is 27,800 pounds when the plane is going 220 miles per hour. Find the lifting force on the wing if the plane slows down to 130 miles per hour.
(Leave the variation constant in fraction form or round to at least 5 decimal places. Round off your final answer to the nearest pound.)

The Lifting Force, F, Exerted On An Airplane Wing Varies Jointly As The Area, A, Of The Wing's Surface

Answers

Answer 1

Answer:

If the lifting force varies jointly with wing surface area and the square of the plane's velocity, then:

F = kAv²

If the lift is 27,800 pounds when the area is 190 sq. ft and the velocity is 230 mph, then the constant of proportionality is:

27,800 = k(190)(230)²

k = (27,800) / (190)(230)² = 139/50255

The lifting force the plane slows down to 200 mph is:

F = (139/50255)(190)(200)²

F = 21,020.79

Rounded to the nearest pound, the lifting force is 21,021 pounds.


Related Questions

Topic : Collisions and Conservation of Momentum

1. Two children are standing still on ice and push off each other. Each has a momentum after the push. Do they violate the conservation of law? Initial momentum is zero.

2. Describe how the conservation law works with elastic and inelastic collisions.

3. In general, for elastic collisions with stationary objects, when will the first object bounce back? When will it follows the stationary object after the collision?

4. What is the use of airbags in vehicles?

5. Why are seatbelt designed to be stretchable?

Answers

As Initial momentum is zero then final will be zero.So afterwards total momentum will be 0.The conservation law works with elastic the collison kinetic energy. And while in the inelastic collisions the energy is not conserved. The stationary object will cause the greater momentum change.It usually reduce the chances of upper body crash during an aciident.The seatbelt designed to be stretchable as itwill cause greter momentum to reduce .What is momentum?

It is amount of force or motion that cause the movement or moving of body.

Thus it is well explained.

To learn more about the collisions refer to link ;

https://brainly.com/question/7694106

1.No they do not violate the conservation of law. Because the initial momentum can be zero.

2. The momentum is conserved in both elastic and inelastic collision.

What is the law of conservation of momentum?

The momentum of the body before the contact is always equal to the momentum of the body after the impact, according to the rule of conservation of momentum.

According to the law of conservation of momentum;

Momentum before collision =Momentum after collision

[tex]\rm m_1u_1 + m_2u_2 = v(m_1 + m_2)[/tex]

1.No they do not violate the conservation of law. Because the initial momentum can be zero.

2. The momentum is conserved in both elastic and inelastic collision. Hence the conservation law works with elastic and inelastic collisions.

3. An elastic collision is one in which kinetic energy is conserved, meaning that the total kinetic energy before and after the impact is the same.

The object bounces once after the body gets struck. When the body's final velocity is zero it follows the stationary object after the collision.

4.. Airbags are meant to inflate automatically in the case of an abrupt deceleration or impact force indicative of a collision.

When the bag is fully inflated, it protects the driver and/or passenger by Increasing cushioning around the driver's neck, head, and spine.

5. Stretchable seatbelts are meant to allow a passenger's considerable velocity to be slowly reduced, preventing the passenger from being flung forward abruptly.

As a result, if the automobile collides, serious casualties can be avoided.

Hence no they do not violate the conservation of law. Because the initial momentum can be zero.

To learn more about the law of conservation of momentum refer;

https://brainly.com/question/1113396

A grasshopper jumps at a 63.0 angle with an initial velocity of 4.22 m/s. how far away does it land

Answers

The grasshopper is 1.47 m far away from the point where it jumps to the point where its lands.

To calculate the distance of the landing point of the grasshopper to the point where its jumps, we use the formula of range.

What is horizontal range?

Range can be defined as the horizontal distance between the point of projection to the point where the projectile hit the plain again.

R = u²sin2∅/g........... Equation 1

Where:

R = Distance between the point of jump and the point at which it landsu = initial velocity∅ = angleg = acceleration due to gravity

From the question,

Given:

u = 4.22 m/s∅ = 63°g = 9.8 m/s²

Substitute these values into equation 1

R = (4.22)²sin(2×63)/9.8R = 1.47 m

Hence, The grasshopper is 1.47 m far away from the point where it jumps to the point where its lands.

Learn more about horizontal range here : https://brainly.com/question/12870645

You are riding a bicycle up a gentle hill. It is fairly easy to increase your potential
energy, but to increase your kinetic energy would be harder.
True or false

Answers

True or false: while riding a bicycle up a gentle hill, it fairly easy to increase your potential energy, but to increase your kinetic energy would ...

To travel at a constant speed, a car engine provides 24 KW of useful power. The driving force on the car is 600 N. At what speed does it travel?

Answers

[tex]\text{Given that,}\\ \\\text{Power,} ~P=24~ KW = 24000~ W\\\\\text{Force,} ~F=600~N\\\\\text{We know that,}\\\\P=Fv\\\\\implies v = \dfrac{P}{F} = \dfrac{24000}{600}=40~ ms^{-1}\\\\\\\text{It travels at 40 m/s}[/tex]

Which of the following is NOT an example of force?
A. gravity
B. mass
C. a push
D. remain at rest

Answers

Answer:

D. remain at rest

Explanation:

D remain at rest because gravity is a force pulling you towards the earth mass is also a force push is also a type of force as you are applying it to an object so D is the answer

The resultant of two vectors is of magnitude 3 units and 4 units is 1 units, what is the value of their dot product? ​

Answers

Answer:

A dot B = C     is the vector equation for this expression

A · B = A B cos θ

3 * 4 cos θ = 1       the value 1 is their dot product

cos θ = 1 / 12 = .083       θ = 85.2 deg

A professional golfer swings a golf club, striking a golf ball that has a mass of 55.0 g. The club is in contact with the ball for only 0.00410 s. After the collision, the ball leaves the club at a speed of 32.0 m/s. What is the magnitude of the average force (in N) exerted on the ball by the club?

Answers

The magnitude of the average force exerted on the ball by the club is 429.27 N.

What is force?

Force can be defined as the product of mass and acceleration

To calculate the force exerted on the ball by the club, we use the formula below.

Formula:

F = m(v-u)/t............ Equation 1

Where:

F = Force exerted on the ballm = mass of the ballv = Final velocityu = initial velocityt = time

From the question,

Given:

m = 55 g = 0.055 kgu = 0 m/sv = 32 m/st = 0.0041 s

Substitute these values into equation 1

F = 0.055(32-0)/0.0041F = 429.27 N

Hence, The magnitude of the average force exerted on the ball by the club is 429.27 N.

Learn more about force here: https://brainly.com/question/18762601

The force of a hammer drives a nail into wood. This is an example of?
A. An unbalanced force.
B. Gravitational force.
C. Friction.
D. Balanced forces.

Answers

Answer:

A. An unbalanced force.

Explanation:

There needs to be a net force in order for the nail to be driven into presumably the wall. Without the net force then the hammer and nail wouldn't move.

static frictional Force​

Answers

Answer:

The static frictional force is the force between the magnetic forces statically and contains only two objects during this physical reaction. It results in electricity and a slight shock.

Explain why is dressing table mirror may become dirsty if wiped with a cloth on a warm day.​

Answers

Answer:

When you rub a dry cloth across glass, it creates charged static electricity, which attracts little non-charged dust particles.

Read the materials on Biomolecules. Summarize and creatively translate them into a poem describing
what you have learned about biomolecules write your answer

Answers

Biomolecules are fundamental for life. They required both energy supply and building structures.

What are biomolecules?

Biomolecules are organic molecules that fundamental for life and must be ingested from the regular diet.

Biomolecules include proteins (e.g., meal proteins), lipids (fats) and also carbohydrates (e.g., glucose).

Biomolecules required both energy supply (e.g., glucose) and building structures (e.g., amino acids in proteins).

Learn more about biomolecules here:

https://brainly.com/question/10904629

A man of mass 70 kg climbs stairs of vertical height 2.5m. Calculate the work done against the force of gravity. (Take g = 9.81 ms?)​

Answers

Answer:

1716.75 J

Explanation:

Step 1: First check what we are provided with. As per given question we have:

mass (m) = 70 kg, height (h) = 2.5 m and acceleration due to gravity (g) = 9.81 m/s².

Step 2: Check what we are asked to find out.

Work done = Change in Potential energy

The stuff required to solve this question is potential energy. Using the formula: P = mgh. Where P is Potential energy, m is mass, g is acceleration due to gravity and h is height.

Step 3: Substitute the known values in the above formula.

→ P = 70 × 2.5 × 9.81

→ P = 1716.75 J

Hence, the work done against the force of gravity is 1716.75 J.

Please help solve. Image down below

Answers

Answer:

thats is so hard

Explanation:

i cant answer that

Which statement correctly describes the relationship between frequency and wavelength?
A :As the frequency of a wave increases, the longer its wavelength is

B: As the frequency of a wave increases, the shorter its wavelength is.

C: As the frequency of a wave increases, its wavelength remains the same.

Answers

Answer:

It is B

Explanation:

Option B talks about how the frequency of the wave increases the shorter it's wavelengths

Answer:

It's b

Explanation:

Need help with the following - question 2

Answers

Answer:

Find the change in momentum of the upper stage, that is:

∆p = m(vf - vi)

m being the mass of the upper stage

vf being the final velocity which was given

vi being the initial which was also given

find ∆p

then use ∆p in the same equation

∆p being the answer you got above

m being the mass of the lower stage (given)

vi being the initial velocity (given)

vf being the final velocity of the lower stage which you were asked to find

Explanation:

During a collision the change in momentum (∆p) for both objects is equal regardless of their speeds or masses before or after the equation

match each term to its definition.
the vocabulary
Volt
electric potential energy
electric potential difference
electric potential

the definitions

the SI unit of electric potential difference
difference in electric potential between two positions
potential energy an electric charge has due
to its location in a field
electric potential energy of a charged particle divided by its charge
here are the answers

Answers

Electric potential difference is the difference in electric potential between two positions and it is measured in volts.

What is electric potential energy?

This is the potential energy of an electric charge has due to its location in a field.

What is electric potential?

The electric potential of a charged particle is the electric potential energy of the charged particle divided by its charge magnitude.

What is electric potential difference?

Electric potential difference is the difference in electric potential between two positions.

What is volt?

Volt is the SI unit of electric potential difference.

Learn more about electric potential here: https://brainly.com/question/14306881

Find out the three methods of energy transfer (conduction, convection and radiation). think about
2 situations of daily life where you know or think you know that each one applies

Answers

Explanation:

conduction- putting a metal spoon in fire

convection- boiling water. In ventilation

Radiation- suns heat reaches us by radiation. heat from fire place reaches us by radiation.

How can an athlete participating in a 40m sprint modify and improve their performance based on the kinematic variable of speed and acceleration?

Answers

The athlete can improve performance by building strength, coordination and balance.

Who is an Athlete?

This is an individual who is proficient in sports and other forms of physical exercise.

Improvement of performance based on the kinematic variable of speed and acceleration can be achieved by building strength, coordination and balance by performing plyometric exercises etc.

Read more about Athlete here https://brainly.com/question/1532968

As a block falls through the air by 40 meter it does work equal to -1800 joule. Determine the mass of a block.

Answers

Answer:

m = 4.5 kg

Explanation:

w = - 1800 j

Fd = - 1800 j

mgd = - 1800 j

m = - 1800 ÷(gd)

m = - 1800 ÷( 10×-40)

m = 4.5 kg

A horizontal push of 197 N is applied to a 49.1 kg crate to slide it along a level floor. The crate is accelerating at 3.337 m/s2 (speeding up). What is the magnitude of the kinetic friction force between the crate and the floor

Answers

The magnitude of the kinetic friction force between the crate and the floor is 33.15 N.

Kinetic frictional force

The magnitude of kinetic frictional force is determined by applying Newton's second law of motion as shown below;

F - Ff = ma

where;

Ff is kinetic frictional forcea is acceleration of the crateF is the applied force

Subsitute the given parameters and solve for kinectic frictional force

197 - Ff = 49.1(3.337)

197 - Ff = 163.85

Ff = 33.15 N

Thus, the magnitude of the kinetic friction force between the crate and the floor is 33.15 N.

Learn more about kinetic frictional force here: https://brainly.com/question/20241845

I NEED HELP FAST

Match the term with the appropriate image

A) Focal length

B) Object position

C) Image position

Answers

1st image - B) Object position

2nd image - A) Focal length

3rd image - C) Image position

object position is from the lens to the object.image position is from the lens to where both rays meet together.Focal length is where the ray meets the principal axis.

Select the correct answer. Based on the law of conservation of energy, which statement is correct? O A. Energy is always being added to all parts of the Universe. O B. Energy is often destroyed in some parts of the Universe. O C. Energy in a closed system cannot change forms. O D. Energy in an isolated system remains constant.

Answers

Answer:

d. energy in an isolated system remains constant.

Explanation:

energy can neither be replaced or destroyed

If a 40 N block is resting on a rough horizontal table with a
coefficient of static friction p=0.60, then what is the force of
static friction acting on the block?

Answers

Based in the relationship between static frictional force and coefficient of static friction, the force of static friction is 24 N.

What is friction?

Friction is a force that opposes the relative motion of an object moving over another at their surafce of contact.

Frictional force is constant for each type of material. This constant is known as coefficient of friction.

The coefficient of friction is given as follows:

Coefficient of friction = Frictional force/normal reaction

From the data given:

coefficient of static friction p = 0.60Weight of block = 40 N

Force of static friction = 0.60 × 40

Force of static friction = 24 N.

Therefore, the force of static friction is 24 N.

Learn more about static friction at: https://brainly.com/question/11361910


Examine the image below:
Which term describes the wave phenomenon in the image?

Answers

Answer:

C

Explanation:

Reflection.

A curve is banked at an angle of 29.1 degrees above the horizontal and the road surface has a coefficient of static friction of 0.4. What must the radius of curvature be for the safe minimum speed of 27.1 m/s?

Answers

Hi there!

We can begin by summing the forces acting on the car.

Along the axis of the incline, the forces of friction and gravity are working. The force of friction points towards the top of the ramp, while the force of gravity works towards the bottom.

We can use trigonometry to determine the force due to gravity along the ramp.

[tex]F_g = Mg sin\theta[/tex]

The force due to friction is equal to:
[tex]F_f = \mu N[/tex]

The normal force is the vertical component of the force due to gravity, so:
[tex]F_f = \mu Mgcos\theta[/tex]

Now, the combination of these two forces produces a component of the centripetal force. Drawing a diagram, we see that the true centripetal force is the HYPOTENUSE, while these forces sum up to its horizontal component along the ramp.

Therefore:
[tex]F_c sin\theta = Mgsin\theta - \mu Mgcos\theta[/tex]

The centripetal force is equivalent to:
[tex]F_c = \frac{Mv^2}{r}[/tex]

m = mass (kg)

v = velocity (m/s)
r = radius (m)

Rewrite:
[tex]\frac{Mv^2}{r}sin\theta = Mgsin\theta - \mu Mgcos\theta[/tex]

Cancel out 'M'.

[tex]\frac{v^2}{r}sin\theta = gsin\theta - \mu gcos\theta[/tex]

Rearrange to solve for 'r'.

[tex]r = \frac{v^2sin\theta}{gsin\theta - \mu gcos\theta}[/tex]

Plug in values and solve.
[tex]r = \frac{(27.1^2)sin(29.1)}{(9.8)sin(29.1) - 0.4(9.8)cos(29.1)} = \boxed{266.365 m}[/tex]

How fast must a proton move so that its kinetic energy is 70% of its total
energy?

I thought it would be 0.7c but that is wrong. I really don't know how to do this type of problem and my text book isn't any help.

Answers

Try this solution, all the details are in the attachment. note, the answer is marked with orange colour. If it is possible, check the provided solution in other sources.

Answer: ≈0.81c.

The resistance of a 60.-watt lightbulb operated at
120 volts is approximately

Answers

Answer:

The resistance of a 60 watt light bulb designed to operate at 120 volts is 240 Ω.

Explanation:

Ways in which a teacher plays a role in the literacy development of the learners​

Answers

Answer:

encourage all attempts at reading, writing, and speaking

Explanation:

A basketball player must jump 1.2m in the air in order to dunk. What is the total time he is in the air?

Answers

Answer:

0.98 [sec].

Explanation:

1) the time when the player is moving up equals the time the player falls, it can be 't'. Then

2) the equation of moving down can be written as

[tex]\frac{g*t^2}{2} =h, \ where[/tex]

g=10 [m/s²], t - time, h - the given height.

3) according to the formula above the time spent to moving down is:

[tex]t=\sqrt{\frac{2h}{g}};[/tex]

[tex]t=\sqrt{\frac{2.4}{10}}=\sqrt{0.24} =0.49[s].[/tex]

4) finally, the total time is t*2=0.98[sec].

An experiment is set up as follows:
A mass m = 9.4kg is sent down a frictionless ramp with an initial velocity of 2.5m/s. The ramp is 87cm
long and has an angle of 36°above the horizontal. At the bottom of the ramp is a horizontal surface with a
kinetic friction coefficient of μk = 0.27. At the far side of the horizontal surface, 48cm away, is a spring with
k-constant ks = 3,413.7N
m that will be compressed as the mass collides with the spring. The experiment
ends as the spring is fully compressed and the mass is at rest.
Note: The distance that the spring is compressed is in addition to the 48cm.
7) Find the initial energy of the mass. (10pts)
8) How far will the spring compress if there is no surface friction under the spring? (10pts)
9) How far will the spring compress if the surface friction continues under the spring? (20pts)

Answers

(a) The initial energy of the mass is 76.485 J.

(b) The compression of the spring in the absence of friction is 21.2 cm.

(c)  The compression of the spring in the presence of friction is 19.4 cm.

Initial energy of the mass

The initial energy of the mass is determined as follows;

E = K.E + P.E

E = ¹/₂mv² + mgh

where;

h is the height of the ramp

E = ¹/₂mv²  + mg x Lsinθ

P.E = ¹/₂(9.4)(2.5)² +  (9.4)(9.8)(0.87)(sin36)

P.E = 76.485 J

Compression of the spring when there is no surface tension

The compression of the spring in the absence of friction is calculated as follows;

Ux = E

¹/₂kx² = 76.485

kx² = 2(76.485)

x² = (2 x 76.485)/k

x = √(2 x 76.485)/k

x = √(2 x 76.485 / 3413.7)

x = 0.212 m

x = 21.2 cm

Compression of the spring in presence of friction

The compression of the spring in the presence of friction is determined by applying the principle of conservation of energy.

E - Fd = Ux

E - μmgd = ¹/₂kx²

76.11 - (0.27 x 9.4 x 9.8 x 0.48) = ¹/₂(3413)x²

64.17 = 1706.5x²

x² = 0.0376

x = √0.0376

x = 0.194

x = 19.4 cm

Learn more about conservation of energy here: https://brainly.com/question/166559

Other Questions
Write the equation in spherical coordinates. (a) x2 y2 z2 = 64 Summarize the "Reinvention Principles." and describe some of the accomplishments of this initiative. (37 +5)^2 simplify the problem to its simplest form. helppp I dunno how to answer theseeeee im so confuseddddddddd A team of computer science researchers develop a program for searching trees that can be run in parallel. When they use distributed computing techniques to run the program on six computers in parallel, they find a speedup of 3. In this case, what does a speedup of 3 indicate? How many liters are in 950mL I need help desperately lol simplify the following 726+32 What is the scale factor from square ABC to square DEF Which of the characteristics is common to both arthropods and annelids and suggests that the two groups shared common ancestry?. should the United States dropping atomic bombs on japan? Please help! As long as it is correct you will get brainliest!Land developers are dividing a property into several sections to develop a new neighborhood, as shown below. Find the area, in square blocks, of the mall section of the property. Show all your work. Find the area, in square blocks, of the park section of the property. Show all your work. Find the total area, in square blocks, of the sections with homes. Show all your work. If the developers paid $500.00 per square block, how much did they pay for all the property being developed? Explain your answer. Identify the characteristics of what oscar lewis calls the ""culture of poverty. "". Help picture below problem 15 If 4.65 LL of CO2CO2 gas at 22 CC at 793 mmHg mmHg is used, what is the final volume, in liters, of the gas at 35 CC and a pressure of 743 mmHg mmHg , if the amount of CO2CO2 does not change? Pea plants can have yellow seeds or green seeds. which conclusion about the meaning of y is correct if the allele combination yy is for yellow seeds? yellow and dominant green and recessive yellow and recessive green and dominant Which of these methods of waste management is most likely to releaseheavy metals and other toxins into the air?A. BuryingB. DumpingC. IncineratingD. Composting What are some examples of food recalls that have recently taken place according to the host? Me llamo Juan Vega. Juan es mi nombre y Vega es mi ________. Identify the 27th term of an arithmetic sequence where a1 = 38 and a17 = 74.