The pH of a 0.050 M aqueous codeine solution is calculated 10.30.
To find the pH of a 0.050 M aqueous codeine solution, we need to first determine the concentration of hydroxide ions (OH⁻) in the solution, since codeine is a weak base. We can do this using the Kb value of codeine:
Kb = [OH⁻][Codeine]/[CodeineOH⁺]
Since we are given the Kb value and the concentration of codeine, we can solve for [OH⁻]:
Kb = [OH⁻][Codeine]/[CodeineOH⁺]
1.6x10-6 = [OH⁻][0.050]/[CodeineOH⁺]
To simplify this equation, we can assume that [OH⁻] is much smaller than 0.050 (since codeine is a weak base, it will only partially dissociate in water to form OH⁻ ions). This means that we can neglect the change in [Codeine] due to its partial dissociation, and approximate [Codeine OH⁺] to be equal to 0.050 - [OH⁻]:
1.6x10-6 = [OH⁻][0.050]/(0.050 - [OH⁻])
Simplifying and solving for [OH⁻], we get:
[OH⁻] = 2.0x10-4 M
Now we can find the pH of the solution using the equation:
pH = 14 - pOH
pOH = -log[OH⁻] = -log(2.0x10-4) = 3.70
pH = 14 - 3.70 = 10.30
Therefore, the pH of a 0.050 M aqueous codeine solution is 10.30.
To know more about pH, refer
https://brainly.com/question/172153
#SPJ11
To solve this problem, we need to use the formula for calculating the pH of a weak base solution. The formula is pH = pKb + log([base]/[acid]), The Kb value for codeine is 1.6x10⁻⁶, so the pKb is 5.80 (-log(1.6x10⁻⁶)).
Next, we need to find the concentration of codeine-H+ in the solution. Since codeine and its conjugate acid are in equilibrium, we can use the equation Ka x Kb = Kw to calculate the Ka value for codeine-H+. Kw is the ion product constant for water, which is 1.0x10⁻¹⁴ at 25°C. Therefore, Ka = Kw/Kb = 6.25x10⁻⁹. Now we can use the equilibrium constant expression for the dissociation of codeine-H+ to find its concentration. The expression is Ka = [H+][codeine]/[codeine-H+]. At equilibrium, [H+] = [codeine-H+], so we can simplify the expression to Ka = [H+]²/[codeine]. Solving for [H+], we get [H+] = sqrt(Ka*[codeine]) = sqrt(6.25x10⁻⁹) = 1.25x10⁻⁵ M.
Finally, we can plug in the values we found into the pH formula. pH = pKb + log([base]/[acid]) = 5.80 + log(0.050/1.25x10⁻⁵) = 10.50. Therefore, the pH of a 0.050 M aqueous codeine solution is 10.50. In conclusion, the pH of a 0.050 M aqueous codeine solution is 10.50. We found this value by using the formula for calculating the pH of a weak base solution and solving for the concentration of codeine-H+ in the solution.
To know more about equilibrium visit:-
https://brainly.com/question/30694482
#SPJ11
use the table of temperatures measured in two areas of a house to answer the question
which statement best explains the temperature difference?
A. energy is transferred between the areas when molecules touch
B. energy from the cooler air is transferred upstairs
C. the cooler air downstairs loses energy to the environment
D. warm air rises by convection to the upstairs
According to the concept of thermal energy, the statement which best explains the temperature difference is that warm air rises by convection to the upstairs.
What is thermal energy?Thermal energy is defined as a type of energy which is contained within a system which is responsible for temperature rise.Heat is a type of thermal energy.It is concerned with the first law of thermodynamics.
Thermal energy arises from friction and drag.It includes the internal energy or enthalpy of a body of matter and radiation.It is related to internal energy and heat .It arises when a substance whose molecules or atoms are vibrating faster.
Learn more about thermal energy,here:
https://brainly.com/question/18989562
#SPJ1
2.
Much of the cost of coal use in the United States comes from transporting it across
the country. If 8% of the price of coal is spent on transportation, how much money is
lost to transportation per short ton?
The cost of coal per short ton in the United States is approximately $50. 8% of this would be $4, meaning that the amount of money lost to transportation per short ton is $4.
What is transportation?Transportation is the movement of people or goods from one place to another. It is a critical part of the global economy and is a key factor in the development of social and economic opportunities. Transportation is also an important factor in the quality of life of individuals and communities. There are many different types of transportation, including public transit, such as buses, trains, and subways; private transit such as taxis, carpools, and ride sharing; and personal transportation such as cars, motorcycles, and bicycles. Transportation is an essential tool for connecting people and goods to the places they need to go, and for providing access to essential goods, services, and opportunities. It is also a key factor in the development of cities and urban areas, as well as in the movement of people and goods between countries and continents.
This is due to the cost of transporting coal from the mine to the point of sale, which can include costs such as fuel, labor, and infrastructure.
To learn more about transportation
https://brainly.com/question/30168663
#SPJ1
What is an ionic bond with two suitable examples explain the difference between an ionic and a covalent bond?
Covalent bonds are created between two nonmetals, whereas ionic bonds are formed between a metal and a nonmetal.
Covalent bonds between atoms develop when there is little to no difference in the electronegativity of the atoms, whereas ionic bonds form when there is a large difference.
Covalent bonds are created when the half-filled atomic orbitals of two different atoms overlap, but ionic bonds cannot be created by overlapping orbitals.
For example, the ionic bond in NaCl is written as Na⁺Cl⁻ because sodium is a metal and chlorine is a non-metal.
Let's use methane as an example. Due to the low difference in electronegativity between carbon and hydrogen, the atomic orbitals of these two elements meet in this molecule and form a covalent bond.
Want to know more about ionic and covalent bonds visit the link which is given below;
https://brainly.com/question/10777799
#SPJ4
How many grams of potassium hydroxide (KOH), exist in 12.50 X 1019 molecules of KOH?
1.343 x 10²³ grams of potassium hydroxide (KOH), exist in 12.50 X 1019 molecules of KOH.
What does Avogadro's number mean?The quantity of units in one mole of any substance is called the Avogadro number, also referred to as the Avogadro constant. The comparable number is 6.0221408571023. The units may be electrons, ions, atoms, or molecules, depending on the type of reaction occurring and the substance being utilized. Two gases of the same volume have the same number of molecules when they are at the same temperature and pressure, according to Amedeo Avogadro.
Given:
0.2228 mol of potassium hydroxide in 12.50 X 1019 molecules of KOH
Hence in one mole, there is Avogadro number of molecules
i.e. 6.023 × 10²³ molecules.
no of atoms = 0.223 x 6.023
= 1.343 x 10²³
To learn more about potassium hydroxide, visit:
https://brainly.com/question/29765117
#SPJ1
What is the best description of a mole?
A mole is described as the amount of substance that has as many particles as there are atoms in exactly 12 grams of carbon 12 isotope.
A mole refers to the amount of substance that has as many particles as there are atoms in exactly 12 grams of carbon 12 isotope. A mole shows 6.022×1023 particles irrespective of their nature. The symbol of a mole is 'mol'. And one mole is equal to 6.022×1023.
A mole is a standard scientific unit that measures large quantities of very small entities such as molecules, atoms, or other specified particles.
You can learn more about mole at
https://brainly.com/question/24191825
#SPJ4
Draw a chiral ketone with the formula C6H12O.
One of the chiral ketones which has the formula of C₆H₁₂O is Methyl isobutyl ketone
MIBK is used as a solvent in factories that manufacture paints, rubber products, chemicals, and machinery. As a solvent, it is used in pesticide spraying. Pharmaceutical companies that manufacture prescription drugs also use his MIBK. MIBK enhances and retains flavor and aroma.
Unlike acetone and butanone, MIBK has fairly low solubility in water. It has similar polarity to ethyl acetate but is more acid/base stable. This and its low density make it suitable for liquid-liquid extraction. These are the uses and applications of one of the chiral ketones.
Learn more about the chiral ketones in
https://brainly.com/question/28452799
#SPJ4
Which of the following groups contains the most reactive elements?a. the alkali metalsb. the alkaline earth metalsc. the carbon familyd. the noble gase
Option (a) is correct. The alkali metals contains the most reactive elements. It is present in the group 1 of the periodic table.
In the periodic table, Group 1 includes hydrogen and the alkali metals. Because they have just one valence electron, group 1 elements are very reactive. The atoms of Alkali metals can easily give away the one outer-level electron. This is due their larger atomic radii and low ionization energies. These metals are most reactive. Alkali metal tend to donate their electrons in reactions and have an oxidation state of +1. These alkali metals are characterized by their soft texture and silvery color. They have low boiling point and melting points. These are less dense. Lithium, sodium and potassium float on water because of their low density. This explains the alkali metals.
To learn more about Alkali metals please visit:
https://brainly.com/question/25317545
#SPJ4
what is the percentage mass of oxygen of magnesium nitrate with working
Answer:
below on my bule
Explanation:bule
Predicting products of chemical reactions worksheet
Predict the products of the reactions below. Then, write the balanced equation and classify the reaction. If a
precipitate forms, indicate by using (s) by the precipitate. If "no reaction" occurs write N.R. beside the
question.
Use your activity series, predicting products helper sheet and the solubility rules.
1. magnesium bromide + chlorine →
2. aluminum + iron (III) oxide →
3. silver nitrate + zinc chloride →
4. sulfuric acid (H2SO4) + sodium hydroxide →
5. aluminum + oxygen →
Product prediction and solubility rules in the following chemical reactions
1. magnesium bromide + chlorineMgBr2 (aq) + Cl2 (g) → MgCl2 (aq) + Br2 (aq)
Reaction type: Substitution
2. aluminum + iron(III) oxide2 Al (s) + Fe2O3 (s) → Al2O3 (s) + 2 Fe (s)
Reaction type: Redox
3. silver nitrate + zinc chlorideZnCl2 + 2 AgNO3 → Zn(NO3)2 + 2 AgCl
Reaction type: Double substitution
4. sulfuric acid (H2SO4) + sodium hydroxideH2SO4 (aq) + 2 NaOH (aq) → Na2SO4 (aq) + 2 H2O (l)
Reaction type: Neutralization
5. Aluminum + oxygen4 Al (s) + 3 O2 (g) → 2 Al2O3 (s)
Reaction type: Oxidation
Learn more about predicting products of chemical reactions at https://brainly.com/question/3678899
#SPJ4
How many molecules are there in 295 grams of ammonia?
Answer:
295 g of ammonia = (17.32 mol x 6.022 x 10^23 molecules/mol) = 1.04 x 10^25 molecules.
Explanation:
hope this helps
Please help Chemistry will give brainliest if right!
54.0 g Al reacts with 64.0 g O2 to
form Al2O3 according to the equation.
4AI + 302 → 2Al2O3
Al: 27 g/mol Al2O3: 102 g/mol
How many grams of Al2O3 form
from 54.0 g Al?
[ ? ] g Al2O3
Answer: Don't know if this is right but try 102 g.
Explanation: I put this into acellus and it was correct so see if that works.
How are weather and climate different from each other?
Climate is the average weather of the area over a long term period. weather is short-term changes in the atmosphere
Answer: Weather refers to a short-term change in the atmosphere or temperature, while climate is over a long period of time.
Round off to 3 sig figs-1638
1,640. The number is rounded up because the digit in the tenths place is 8, which is greater than or equal to 5.
What is rounded off?Rounding off is a mathematical process of replacing a number with an approximate value that has a shorter, simpler, or more explicit representation. It is often done to reduce the number of significant figures in a calculation or to make calculations easier. Rounding off is used in many everyday situations, such as calculating a restaurant bill or estimating the amount of paint needed to paint a room. It is also used in more complex calculations, such as in scientific and engineering calculations.
To learn more about rounded off
https://brainly.com/question/13993506
#SPJ1
What type of epithelium is found along most of the digestive tract?
In humans, simple columnar epithelium is the type of epithelium that found along most of the digestive tract including the stomach, and intestines.
Simple columnar epithelium is made up of a single layer of tall, slender columnar epithelial cells with oval-shaped nuclei that are linked to the basement membrane in the basal region. The majority of the digestive tract's organs in humans, including the stomach and intestines, are lined by simple columnar epithelium. The uterus is lined with simple columnar epithelium as well.
There are two further classifications for simple columnar epithelium: ciliated and non-ciliated (glandular). Tiny hairs on the ciliated portion of the simple columnar epithelium assist in moving mucus and other materials along the respiratory system.
The majority of the human digestive tract, including the stomach and intestines, is lined by simple columnar epithelium.
Learn more about Simple columnar epithelium at https://brainly.com/question/17203173
#SPJ4
How many atoms are in 0.540 moles of sodium?
Answer:
3.24108 Raised to 23 I'm pretty sure
3-less than or equal to -5x graph in slope intercept form question #9
9. The slope for the given equation 3- y ≤ -5x is 5 and intercept is 3.
What is meant by slope intercept method?Slope-intercept form (y=mx+b) of linear equations highlights the slope (m) and y-intercept (b) of line. The slope intercept formula y = mx + b is used when you know the slope of line that is to to be examined and point given is also the y intercept (0, b). In this formula, b represents y value of the y intercept point.
The slope intercept for of linear equation is: y = mx +b
m is slope and b is y intercept.
So, y = 5x + 3
Now m = 5 ; so the slope is 5
b = 3 ; hence y-intercept is 3
To know more about slope intercept method, refer
https://brainly.com/question/22057368
#SPJ1
1. Identify each of the following as a measurements of length,area, volume, mass, density, time or temperature:
a)ns
b)10.0 kg/m3
c) 1.2 pm
d)750 km2
e) 83 K
f) 4.0 mm3
2. Carry out the following operations, and express the answerwith the appropriate number of significant figures and units:
a) (5.231 mm)(6.1 mm)
b) 72.3 g/1.5 mL
c) 12.21 g + 0.0132 g
d) 31.03 g + 12 mg
3. Drug medications are often prescribed on the basis of bodyweight. The adult dosage of Elixophyllin, a drug used to treatasthma, is 6 mg/kg of body mass. Calculate the dose in milligramsfor a 150-lb person.
4. A man who is 5 ft. 8 in. tall weighs 160 lb. What is hisheight in centimeters and his mass in kilograms.
In the same way, as the U.S. customary system employs feet, quarts, and ounces to measure these things, the metric system measures length, liquid volume, and mass in units like meter, liter, and gram.
The metric system uses kilograms or grams to measure mass, meters or kilometers to measure distance, and liters to measure volume. Time doesn't have any quantifiable physical qualities. The length of time between two events is what we are actually counting. People have used a variety of methods throughout history to keep track of the passage of time, including sunrise and sunset times and moon phases. Volume, which is measured in cubic units, is the area in three dimensions that matter occupies or that is encircled by a surface. The cubic meter (m3), a derivation of the SI unit of volume.
To find more on volume, refer here:
https://brainly.com/question/463363
#SPJ4
Calculate the number of H atoms in 0.532 mol C4H10. Na = 6.022 x 1023.
O 8.83 x 10-24 H atoms
O 3.20 x 1023 H atoms
O 8.83 x 10-25 H atoms
O 1.13 x 1024 H atoms
O 3.20 x 1024 Hatoms
3.20 x 1024 H atoms, which were produced after the Big Big 13.7 billion years ago, are contained in 0.532 mol of C4H10, the smallest known unit of mass.
How are atoms made?Atomic structure: composition The atom is made up of a small nucleus that is encircled by circling electrons. Protons, which are found in the nucleus and have positive charges comparable to the atom negative charges, are present. Neutrons, which are almost the same size but lack a charge, might also be found in the nucleus.
What are the 3 different types of atoms?Protons, electrons, and neutrons are the 3 main types of particles found in atoms. In contrast, the mass of the electron is extremely little compared to that of neutrons and protons. A neutron has had no charge, a proton has a positive charge, and an electron has a negative charge.
To know more about atom visit:
https://brainly.com/question/1566330
#SPJ4
What are the (3) most commonly used chemical sanitizers and their PPM?
bleach) containing 50 to 100 micrograms (ppm) of chlorine. The most common sanitizers on the market contain chlorine. the quaternary ammonium (QUAT, QAC) Maintaining concentration: as instructed by the manufacturer. Iodine. Concentration ranges from 12.5 to 25 ppm.
What disinfectants spring to mind?The three main chemical substances that are used as sanitizers in the food service industry are iodine sanitizers, chlorine-based cleansers, and cleaners. The most used molecular sanitizing agent is chlorine since it is both very effective and inexpensive.
Is rubbing alcohol a sanitizer?It may successfully eradicate a variety of pathogens, including bacteria, hepatitis, and fungi, due to its effectiveness as a germicide. Rubing alcohol can be used as a household cleaner, but it is widely employed in medical settings to clean hands.
To know more about Sanitizers visit:
https://brainly.com/question/1570533
#SPJ4
When the following reactions come to equilibrium, does the equilibrium mixture contain mostly reactants or mostly products?
H2 (g) + S (s) <--> H2S (g) Kc = 7.8 x 105
N2 (g) + 2H2 (g) <--> N2H4 (g) Kc = 7.4 x 10-26
Is large, the equilibrium mixture is mostly products. If Kc is small, the equilibrium mixture is mostly reactants. When Kc is approximately 1, the equilibrium mixture contains appreciable amounts of both reactants and products.
What is equilibrium?Equilibrium is the state in which market supply and demand balance each other, and as a result prices become stable. Generally, an over-supply of goods or services causes prices to go down, which results in higher demand—while an under-supply or shortage causes prices to go up resulting in less demand.The balancing effect of supply and demand results in a state of equilibrium.The equilibrium price is where the supply of goods matches demand. When a major index experiences a period of consolidation or sideways momentum, it can be said that the forces of supply and demand are relatively equal and the market is in a state of equilibrium.Economists find that prices tend to fluctuate around the equilibrium levels. If the price rises too high, market forces will incentivize sellers to come in and produce more. If the price is too low, additional buyers will bid up the price. These activities keep the equilibrium level in relative balance over time.To learn more about momentum refer to:
https://brainly.com/question/18798405
#SPJ4
0.0269 moles of CaO are reacted, how many grams of CaOH2 will be produced
Answer:
Ok so, 0.0269 moles of CaO are reacted, how much of CaOH2 will produce.
Explanation:
How many grams are in a mole of Ca OH 2?
74.093 grams
so you need to multiply 0.0269 * 74.093 = 1.9931017
so 1.9931017 CaOH2 will be produced
A 58.0 g sample of unknown composition was carefully analyzed and found to consist of 24.3 g of carbon, 3.072 grams of hydrogen, 5.406 g of oxygen, and the remainder of nitrogen.
Answer:
Mass of nitrogen = 25.222g
Explanation:
We know that the mass of the unknown composition is 58.0g, so the total mass must add up to 58.0g, so let's make the unknown mass of nitrogen = x
24.3g + 3.072g + 5.406g + x = 58.0g
32.778g + x = 58.0g
x = 58.0g - 32.778g = 25.222g
Which reaction would not occur as written due to the Activity Series of Metals (found in your Chemistry Reference Table)?
A. 3 Mg + 2 AlCl3 --> 3 MgCl2 + 2 Al
B. Al + NaCl --> AlCl3 + Na
C. Ca + CuCl2 --> CaCl2 + Cu
D. 2 K + 2 H2O --> 2 KOH + H2
The reaction Al + NaCl → AlCl₃ + Na among the given reactions will not occur according to the reactivity series. Therefore, option B is correct.
What is reactivity series?The reactivity series of metals can be described as the arrangement of metals in the decreasing order of their reactivities.
The metals at the top of the activity series are strong reducing agents as they can easily oxidize. These metals easily corrode. The reducing ability gets weaker moving down the series.
The electropositive elements reduce as move down the activity series of metals. All metals above hydrogen in the reactivity series emit hydrogen gas upon reacting with dilute HCl.
Aluminum metal lies down to the sodium metal so it can not displace sodium metal therefore, this reaction is not possible.
Learn more about the reactivity series, here:
brainly.com/question/13960839
#SPJ1
draw the structure of periodic acid hio4 optimize formal charges
The structure of periodic acid [tex]HiO_{4}[/tex] attached at end of the solution.
The formal charge of [tex]HiO_{4}[/tex] is zero.
Lewis structures illustrate the bonds forming between the various atoms in covalent compounds. These further demonstrate the molecule's lone pairs. Lewis dot diagrams, electron dot diagrams, Lewis dot structures, and Lewis dot formula are other names for them. These structures can predict the shape, polarity, and reactivity of covalent compounds.
First, determine the total number of valence electrons. The H atom (group 1) has one valence electron, the I atom (group 17) has seven, and the O atoms have six valence electrons (group 16).
Take two electrons away from each bond in the skeletal framework. In this form, the 5 bonds each receive 10 of the 32 valence electrons.
The other O atom receives the final two valence electrons, completing the octets for the terminal O atoms. Because the iodine atom does not yet have a complete octet.
The diagram is attached at the end of the solution.
Formal charge = v - l - [tex]\frac{b}{2}[/tex]
v = valence electron on a free atom
l = lone pair electrons in bonding atoms
b = bond pairs of electrons
Therefore formal charge on I = +3, 3O = -1
Thus formal charge of [tex]HiO_{4}[/tex] = zero.
For more questions on Lewis structures
https://brainly.com/question/7273171
#SPJ4
How many carbon atoms are there in 12.0 grams of carbon?
6.022 ×10²³ atoms are present in 12.0 grams of carbon.
Mole (mol) is the amount of material counting 6.02214 × 10²³ particles
The value of the mole is equal to the number of atoms in exactly 12 grams of pure carbon-12.
12.00 g C-12 = 1 mol C-12 atoms = 6.022 × 10²³ atoms
The number of particles in 1 mole is called Avogadro’s Number (6.0221421 x 10²³).
6.022 ×10²³atoms/1mol
or
1 mol/6.022 ×10²³ atoms
Molar Mass is the mass of 1 mol of atoms of an element
An element’s molar mass in g/mol is numerically equal to the element’s atomic mass in amu.
1 mol C/12.01 g C
or
12.01 g C/ 1mol C
To look more about carbon atoms click here
brainly.com/question/22530423
#SPJ4
What is the pressure of a mixture of nitrogen carbon dioxide and oxygen?
The pressure of a mixture of nitrogen, carbon dioxide, and oxygen gases (PO₂ = 254 mm Hg, PN₂ = 0.351 atm, and PCO₂ = 43.9 kPa) is 113.3 kPa
The total pressure exerted by a gas mixture is the sum of the partial pressures of the component gases. For example, Earth's atmosphere is a mixture of gases consisting of nitrogen, oxygen, argon, carbon dioxide, and other gases. Partial pressure is the pressure that each gas has in a mixture so that the pressure of each gas is not affected by the presence of other gases.
The partial pressure formula is:
Ptotal = PNitrogen + Poxygen + PCarbon dioxide.
In question:
PO₂ 254 mm Hg = 33.9 kPa
PN₂ 0.351 atm = 35.5 kPa
PCO₂ = 43.9 kPa
So,
Ptotal = PO₂ + PN₂ + PCO₂
Ptotal = 33.9 kPa + 35.5 kPa + 43.9 kPa
Ptotal = 113.3 kPa
The pressure of a mixture of nitrogen, carbon dioxide and oxygen gases are 113.3 kPa.
Complete the question:
What is the pressure of a mixture of nitrogen carbon dioxide and oxygen gases if the pressures of these gases are as follows: PO2 = 254 mm Hg, PN2 = 0.351 ATM, and PCO2 = 43.9 kPa?
Learn more about the pressure of a mixture at https://brainly.com/question/19813237.
#SPJ4
PLEASEE HELPP ASAPPP IM DYING HERE HAHA PLSS :(
Decomposition - 5
Combustion - 3
Synthesis - 4
Double replacement - 1
Single replacement - 2
Decomposition reaction is the breaking down of one reactant into multiple substances/fragments/parts due to external sources of energy.
Combustion is the burning of any material and we know that burning is a reaction with oxygen.
Synthesis is the formation of one compound from multiple reactants i.e. one product.
A double replacement or double displacement reaction takes place like this: AB + CD --> AC + BD
In single displacement reactions, one element is substituted for another element in the final compound, i.e. A + CD --> AC + D
To learn more about different types of chemical reactions,
https://brainly.com/question/25769000
https://brainly.com/question/12049042
A 25.0 g piece of brass at 325 °C was placed into a sample of water. The final temperature of the water and brass was 42.0 °C. How much energy is released by the brass?
The energy released by the brass is an example of the heat of fusion.
How much energy is released by the brass?The heat released by the brass can be calculated using the equation:q = m × c × ΔTwhere q is the amount of energy released (in Joules), m is the mass of the brass (25.0 g), c is the specific heat capacity of brass (0.385 J/g•°C), and ΔT is the change in temperature (325 °C - 42.0 °C = 283 °C).Therefore, the energy released by the brass is:q = (25.0 g) × (0.385 J/g•°C) × (283 °C)q = 29,202.5 JHeat of fusion is the amount of energy released or absorbed when a substance changes from a solid to a liquid or vice versa. In this case, the brass is changing from a solid to a liquid and releasing energy in the process. The energy released can be calculated using the formula: q = m·ΔT·c, where q is the heat of fusion, m is the mass of the brass, ΔT is the change in temperature, and c is the specific heat capacity of the brass.The mass of the brass is 25.0 g. The change in temperature is 325 °C - 42.0 °C, or 283 K. The specific heat capacity of brass is 0.387 J/g·K. Plugging these values into the equation gives us a heat of fusion of 2,969.2 joules. This is the amount of energy released by the brass when it changed from a solid to a liquid.To learn more about The mass of the brass refer to:
https://brainly.com/question/1993842
#SPJ1
Answer:
-283 C
Explanation:
I got it right
Calculate the number of molecules in 2.86 g CO2.
A. 6.48 x 1015
B. 1.30 x 1022
C.3.91 x 1022
D. 1.17 x 1023
E. 9.26 X 1024
Atoms constitute single neutral particles, and there are 3.91 x 1022 molecules in 2.86 g of CO2. By bonding together two or more atoms, molecules are neutral particles.
WHAT IS a molecule, and give some examples?The smallest component of a material, a molecule is made up of two or more atoms that are joined by chemical bonds and preserve the structure and characteristics of the larger substance. Chemistry is built on molecule-level principles. A subscript indicating the number of atoms is used after the element symbol to identify molecules.
How do you refer to the smallest molecule?An atom is the tiniest component of an element and shares all of its chemical characteristics with the element as a whole. Dalton's Atomic Theory was the first valid theory describing the makeup of stuff. 1. Atoms were indivisible and unbreakable, and they make up all matter.
To know more about molecules visit:
https://brainly.com/question/19556990
#SPJ4
Draw a chiral alcohol with the formula C4H10O.
t-Butyl alcohol (t-BuOH) is a tertiary aliphatic alcohol used as a solvent or alcohol denaturant and as a fragrance carrier in cosmetics. t-butyl alcohol is one of the chiral forms of alcohol.
t-BuOH was reported as an ingredient in 32 eye makeup, fragrance, and shaving formulations at concentrations between 0.00001% and 0.3%. Common modifiers found in cosmetics and personal care products include:
Denatonium benzoate, t-butyl alcohol, diethyl phthalate, methyl alcohol. The alcohol denaturation process does not chemically change the ethanol molecule. Acute exposure:
Acute exposure to tert-butyl alcohol can cause eye irritation and redness, runny nose, sore throat, headache, nausea, fatigue, dizziness, and red and dry skin. The formula of this chiral alcohol is C4H10O.
Learn more about the chiral alcohol in
https://brainly.com/question/14718203
#SPJ4