Engineering High School

the threaded movable part that rotates on a micrometer is called the _______

a. Sleeve
b. Thimble
c. Spindle
d. Anvil

Answers

Answer 1

Answer:

C

Explanation:

The Anvil is the stationary part of the tool, the spindle is the threaded moveable part

Related Questions

Jordan's dad made a new recipe for dinner. Jordan looked at the food and saw that it was white, yellow, and purple in color. She picked up a few pieces and felt that they were firm. As she moved the pieces to her mouth, she recognized the scent of carrot and black pepper. When she took a bite, she noticed it was salty and sweet.

Which statement best describes how Jordan used her senses to know what ingredients were in the recipe?

Answers

Answer:

Jordan used her eyes to see the food, her touch to feel the food, and her nose to smell the food, and lastly, but most importantly, she used her mouth to taste the food.

Which forces on the arrow before is released ?

Answers

Hope this helps! :D

There is a very interesting physical phenomenon in the physics behind archery, known as Archer's paradox. When an arrow is released to the left (or right) of a bow its trajectory follows a path that is different from its expected trajectory.

The contradiction, or paradox, arises from the fact that the arrow oscillates during its release, as the string is exerting its "push" force at the rear of the arrow. As a result of this oscillation, the arrow undulates around the bow shaft, enabling it to fly in a trajectory that is in the same direction as the arrow axis at full draw. The video below shows the motion of the arrow just after release, using a high-speed camera. It only takes milliseconds for the arrow to fly past the bow.

Help me please.please,please​

Answers

Answer:

Explanation:

learn some manners You have

What should you consider when choosing a shotgun as a firearm?

Answers

make sure you meet any minimum legal requirements for caliber, gauge, or the amount of energy produced by the projectile.

which article refers us back to article 430.24 in the service calculation?
A.220.55
B.220.60
C.220.50
D.220.12

Answers

Answer:

B

Explanation:

So i was watching a f1 race and i was wondering, what part of the car stops during a lock-up (when the wheel stops while turning on a corner)

Answers

I think the wheels lock up

pls help me thank you ​

Answers

Answer:   1.  Hand Plane

                 2. Rift Sawn

Explanation:  I'm not Sure tho hope it helps

Hand plane is the best for dressing timber
And Rift sawn

what is shown in the above figure

Answers

Answer:

there is no figure .....

A 10 kg mass is lifted to a height of 2 m What is the potiental energy at this position

Answers

Answer:

5000 wt

Explanation:

Energy=mass÷height

=10,000÷2

=5000wt

Technician A says that the differential gear set allows for the difference is speed of each drive wheel when cornering. Technician B says that the final drive assembly connects the engine to the transmission. Who is correct?

Answers

Answer:

Technician A says that the differential gear set allows for the difference is speed of each drive wheel when cornering.

Technician will say that the differential gear set allows for the difference is speed of each drive wheel when cornering.

What is the last stage of gears?

The last stage of gears found between the vehicle transmission system and the wheels is the final drive ratio. The function of the final drive gear assembly is to enable a gear reduction control stage to reduce the rotation per minute and increase the wheel torque, such that the vehicle performance can be adjusted and the final gear ratio can be between 3:1 and 4.5:1 not 1:1

A gear is a rotating , circular machine element with teeth that can be cut, or in the case of a cogwheel or gearwheel, they can be inserted. These teeth, known as cogs, mesh with another grooved part to transfer (convert) torque and speed.

The basic idea underlying how gears work is comparable to the fundamental idea behind how levers work. Cog is another casual term for a gear. Geared devices can vary the speed, torque, and orientation of a power supply.

Therefore, Technician will say that the differential gear set allows for the difference is speed of each drive wheel when cornering.

Learn more about Technician on:

https://brainly.com/question/14290207

#SPJ2

Which one of the following best defines hardness: (a) energy absorbed by a material when an object strikes its surface, (b) resistance to bending, (c) resistance to permanent indentation, or (d) resistance to scratching

Answers

Resistance to permanent indentation

What is the name of the two-phase microstructure found in steels resulting from the eutectoid transformation of austenite and consisting in alternate layers of ferrite and cementite

Answers

Here I hope this is what you need?

When austenite in iron-carbon alloys is transformed isothermally below the eutectoid temperature at small undercooling, it undergoes eutectoid transformation to produce a unique micro- structure termed “pearlite”, which was discovered by Sorby in 1864.

What is the potiental energy of a 3 kg ball that is on the ground

Answers

Answer:

147.15

Explanation:

147.15 is the answer

For a master blacksmith or metal worker, what qualities distinguish a feature of a house worth preserving for historical reasons from one that is not worth preserving? (Select all that apply.)


metal
original
noncorroded
copper

Answers

Answer:

I think "a","b","c"

Explanation:

I tried and sorry if its wrong

Do Only plastic pipe, not flexible tubing have a maximum temperature rating?

Answers

Answer:

No they both can

Explanation:

When you walk down the street, your muscles are supplying you with the
energy to move (10letters)

Answers

Your muscles are supplying you with the energy to move through a biological process called metabolism.

What is metabolism?

Metabolism can be defined as a set of chemical and biological processes that are carried out by a living organism, in order to sustain life.

A good example of metabolism is the supply of energy by the muscles in the body of a living organism, which enables him or her to move from one point to another.

In conclusion, your muscles are able to supply you with the energy to move through a biological process called metabolism.

Read more on metabolism here: https://brainly.com/question/1490181

how should an instructor act in front of his recruits and cadets?

Answers

Answer:

Professional

Explanation:

:)

why is it important to follow properly the different steps in painting and varnishing a product ?​

Answers

Answer:

The main reason for this is the ingredients found in the paint. Different Ingredients are used to make different types of color paints, therefore when each of these paints is used in connection with the solvent the different chemicals in the paint create a certain reaction with the chemicals in the solvent, and each reaction may be different in each color depending on the chemical compound.

Technician A says that that a box-end wrench is more likely to round the head of a bolt than an open-end wrench. Technician B says that 6-point sockets and wrenches have more surface area on a bolt and will hold more firmly when removing and tightening. Who is correct? a. Technician A b. Technician B c. Both A and B d. neither A nor B I need the answer so I don't fail my test.

Answers

Answer:

The answer is C. Both A and B

In an ideal reheat cycle, steam is generated at 6.3 Mpa, 450 deg. C and partially expands to 0.84 Mpa. At this point, the steam is withdrawn and passed through a reheater. It re-enters the turbine at 0.84 Mpa and 480 deg. C. Complete expansion now occurs to the condenser pressure of 0.02 Mpa. Find the following: a. Enthalpies b. Total heat added and rejected c. Total turbine work and pump work d. Net cycle work e. Cycle efficiency and engine efficiency​

Answers

300 squeare meter 60deegree

An urgent. Please answer this. :)

1 & 2 are Ω

3 & 4 are V​

Answers

Answer:

See below ↓

Explanation:

1) 40 Ω

2) 24 Ω

3) 85 V

4) 135 V

Which of the following are parts of the natural environment? (Select the best four answers.)

Question 1 options:

A sweater


A bear


Prairie grass


A volcano


A cloud


A bathtub


A car


A log cabin

Answers

Answer:

Bear, prairie grass, volcano, and cloud.

I NEED HELP!!!Situation: A client has hired Jose, a materials engineer, to develop a package for an item he has begun to market. The object needs to be mailed to customers within three days of being ordered.

Answers

Answer:

what Jose would do is first develop the package for the product, then find a company to mass produce the package he made, the find a shipping retailer that can get it shipped out to the customer within 3 days of ordering it.

Explanation:


Compute the number of games using the formula of “SINGLE ROUND ROBIN” and plot the games in a table:
● N=9
● N=8
● N=10

Answers

Answer:

N=27.02

Explanation:

Select the correct answer from each drop-down menu.
Dan and Andy have studied blology and are interested in different fields of this subject. Dan loves observing animals and studying the motion of
animals, while Andy wants to branch into the medical field and research artificial limbs and other body parts. What branches of engineering
would the two pursue?
Dan and Andy would pursue different branches of mechanical engineering. The field of
deals with the mechanics
of living organisms
y deals with the creation of artificial body parts.

Answers

The branches that the two pursue is the field of Biology that deals with the mechanics of living organisms and the field of prosthetics that deals with the creation of artificial body parts.

What is the medical field about?

The medical field is known to be the field of Medicine and it is one that centers around health and healing. It is made up of nurses, doctors, etc.

Note that in the above scenario, The branches that the Dan and Andy is the field of Biology that deals with the mechanics of living organisms and the field of prosthetics that deals with the creation of artificial body parts.

Learn more about animals from

https://brainly.com/question/25897306

Other Questions
pls help ill reward brainliest What happens if the amount of withholding taken from your pay is greater than the amount you owe in taxes? I cant remember the last time I got a good nights sleep. I keep waking up because Im so stressed about my math class. I just toss and turn, thinking about the next question Ill get wrong when the teacher calls on me. When the morning alarm goes off, Im exhausted, and by the time math class rolls around, I can barely keep my eyes open. Help!1. Identity (figure out) what you think is causing the persons stress. ?2. How is the situation affecting the student's body?3. Provide one or two ways for reducing their stress. ? wildflower mix contains several different types of seeds.cornflower 40primrose 3black-eyed Susan 2poppy 6baby's breath 12What is the probability that a randomly selected seed will be a poppy seed? Two negative integers are 8 units apart on the number line and have a product of 308.Which equation could be used to determine x, the smaller negative integer?x2 + 8x 308 = 0x2 8x + 308 = 0x2 + 8x + 308 = 0x2 8x 308 = 0 Please help quick!! Ms. Ngyuen works for a book publisher. She is in charge of setting up and hosting four book fairs per year. At these book fairs, the owners of bookstores talk with authors and learn about the new books coming out. Which of these job titles BEST describes her job?A. facilities managerB. records and information managerC. meeting and convention plannerD. arbitrator What is positive according to Adam smith Read the article titled "comparative advantage. " explain what comparative advantage is and how it relates to opportunity cost. How do these principles explain why americans have exported customer service operations to india? A spinner contains four sections: red, blue, green, and yellow. Joaquin spins the spinner twice. The set of outcomes is given as S = {RB, RG, RY, RR, BR, BG, BY, BB, GR, GB, GY, GG, YR, YB, YG, YY}. If the random variable is "yellow (Y)," which of the following is the correct probability distribution? A 2-column table has 3 rows. The first column is labeled Yellow: x with entries 0, 1, 2. The second column is labeled Probability with entries 0. 5625, 0. 375, 0. 625. A 2-column table has 3 rows. The first column is labeled Yellow: x with entries 0, 1, 2. The second column is labeled Probability with entries 0. 75, 0. 25, 0. A 2-column table has 3 rows. The first column is labeled Yellow: x with entries 0, 1, 2. The second column is labeled Probability with entries 0. 5, 0. 375, 0. 125. A 2-column table has 3 rows. The first column is labeled Yellow: x with entries 0, 1, 2. The second column is labeled Probability with entries 0. 5, 0. 25, 0. 25. This is a multiple choice question )Which of the following is an example of a phenotype?A. The actual Height of a organism B. The gene that determines the height of an organism C. all the heights a organism could possibly be What does HE stand for Brainliest if correct please help!!!!!!!11 Which is the better choice: $1000 deposited for a year at a rate of 4.8% compounded semiannually 19) or at a rate of 4.7% compounded quarterly? Which expressions are aquivalent to j + j + 2k ?Choose all answers that apply:A 2jkB 2(j+j+k0C None of the above The data below represents the scores in a golf tournament. If the mean is 70 with a standard deviation of 4.9, circle all values with a z-score greater than 0.5{63, 64, 65, 67, 70, 71, 73, 73, 76, 78} Alice has a total of 12 dimes and nickels. She has 2 more nickles than dimes Which theory proposes that work satisfaction originates from motivating factors, and dissatisfaction originates from hygiene factors?. A net of a square pyramid is shown below. 5.95 cm 5.1 cm What is the surface area, in square centimeters, of the pyramid. Which set of steps can be used to prove the sine sum identity, sin(x y) = sin(x)cos(y) cos(x)sin(y)?.