Use cylindrical coordinates to find the volume of the region E that lies between the paraboloid x² + y² - z=24 and the cone z = 2 = 2.1x + y.

a. The mean age (20.5 years) and standard deviation (2.6 years) you provided are considered statistics.

This is because they are calculated from a sample (all the students at a small college) rather than the entire population of college students. Statistics are numerical summaries that describe the characteristics of a sample, whereas parameters describe the characteristics of an entire population.

b. To label both numbers:
- Mean age (20.5 years): This number represents the average age of students at the small college. The mean is calculated by adding all the ages and dividing by the total number of students in the sample. It is a statistic since it is based on a sample and not the entire population of college students.

- Standard deviation (2.6 years): This number indicates the degree of variation or dispersion of the ages of students in the sample. A higher standard deviation indicates a greater spread in ages, while a lower value suggests a more consistent age range. This, too, is a statistic as it is calculated from the sample rather than the entire population.

Remember, the key distinction between statistics and parameters is that statistics describe samples, while parameters describe entire populations.

You can learn more about standard deviation at: brainly.com/question/23907081

#SPJ11

The amount of glitter that is needed to cover the prism completely is 87.6 kg.

In Mathematics, the surface area of a triangular prism can be calculated by using this mathematical expression:

Total surface area of triangular prism = (Perimeter of the base × Length of the prism) + (2 × Base area)

Total surface area of triangular prism = (S₁ + S₂ + S₃)L + bh

where:

By substituting the given side lengths into the formula for the surface area of a triangular prism, we have the following;

Total surface area of triangular prism = (13 × 25) + (1/2 × 21 × 10 × 2) + (16 × 25) + (21 × 25)

Total surface area of triangular prism = 325 + 210 + 400 + 525

Total surface area of triangular prism = 1,460 m².

For the amount of glitter that is needed, we have:

Amount of glitter = (60 × 1,460)/1000

Amount of glitter = 87.6 kg.

Read more on triangular prism here: brainly.com/question/21173224

#SPJ1

The limit of the Riemann sums is equal to the definite integral ∫[tex]2^3[/tex]x cos(2x) dx.

We have:

lim δ→0 ∑k=1n x_k cos(2x_k)δx_k,

where x_k = a + k(b-a)/n = 2 + k(1)/n and

δx_k = (b-a)/n = 1/n.

Notice that as δ → 0, nδ = (b-a) → 0, so we have a Riemann sum that

approaches a definite integral:

∫[tex]2^3[/tex]x cos(2x) dx.

Thus, the function f(x) = x cos(2x), and the limit of the Riemann sums is

equal to the definite integral ∫[tex]2^3[/tex]x cos(2x) dx.

for such more question on integral

https://brainly.com/question/27746495

#SPJ11

The given limit represents a Riemann sum of the function f(x) = x*cos(2x) on the interval [2, 3]. Evaluating the limit by taking the definite integral of the function over the interval gives the value of 3/2.

To evaluate the given limit of Riemann sums, we need to first identify the function f. Note that the expression inside the summation, xk cos^2(xk) delta xk, suggests that f(x) = x cos^2(x).

Next, we can rewrite the limit as a definite integral by using the definition of the integral. We have:

lim delta→0 Σk=1n xk cos^2(xk) delta xk

= ∫2^3 x cos^2(x) dx

Thus, the limit of Riemann sums is equal to the definite integral of the function f(x) = x cos^2(x) over the interval [2,3].

To learn more about Riemann sum click here: brainly.com/question/30241844

#SPJ11

The slope of the tangent line of the function f(x) = √x is 1/2√a

To determine the slope of the tangent line of the given function, we have to find the derivative of the function and take the evaluation at that point.

Given;

f(x) = √x

Using the power rule in differentiation;

[tex]f'(x) = \frac{dy}{dx} = \frac{1}{2}x^-^\frac{1}{2}[/tex]

To determine the slope of the tangent line, let's find the evaluation of the derivative at this specific point.

Assuming;

x = a

[tex]f'(a) = \frac{1}{2}a^-^\frac{1}{2}[/tex]

This implies that the slope of the tangent line to f(x) at the specific point is ;

[tex]\frac{1}{2}\sqrt{a}[/tex]

Note that since the square root function has a non-zero slope for positive values of x, the slope of the tangent line exists for all positive values of a.

Learn more on slope of a tangent line here;

https://brainly.com/question/30402311

#SPJ1

Let's choose c = (p + q) / 2. Since p < q, it follows that (p + q) / 2 lies between f(p) and f(q). Therefore, there exists an x between p and q such that f(x) = (p + q) / 2.

To prove the proposition "if p and q are real numbers with p < q, then there exists an x in the real numbers such that p < x < q," we can use the intermediate value theorem.

Proof:

Assume p and q are real numbers with p < q.

Consider the function f(x) = x defined on the interval [p, q]. Since f(x) is a continuous function on this interval, the intermediate value theorem guarantees that for any value c between f(p) and f(q), there exists a value x between p and q such that f(x) = c.

Know more about real numbers here:

https://brainly.com/question/551408

#SPJ11

As seasonal index of 1 indicates that the season is average. This means that the data for the season falls in line with what is expected based on historical trends and patterns.

Seasonal indexes are used to adjust data for seasonal variations so that the underlying trends can be analyzed accurately. For example, a retailer may use seasonal indexes to adjust their sales data to account for the higher sales volume during the holiday season.

It is important to understand seasonal indexes when analyzing data and making business decisions based on seasonal trends.

A seasonal index of 0.5 would indicate that the season is weaker than average, while a seasonal index of 10 or 100 would suggest that the season is much stronger than average.

To learn more about : average

https://brainly.com/question/130657

#SPJ11

A seasonal index is a tool used in data analysis to measure the level of seasonal variation in a given time series. An index of 1 indicates that the season is average, meaning that there is no significant deviation from the expected seasonal pattern.

A seasonal index is a numerical value that represents the relative level of a variable, such as sales or demand, during a particular season. It is usually represented as a ratio or percentage that compares the actual value of a variable to its expected value during a particular season.  An index below 1 means that the season is below average, while an index above 1 means that the season is above average.

A seasonal index of 1 (E) indicates that the season is average because it implies that the observed value during that season is equal to the overall average for all seasons. In this case, there is no significant seasonal variation or deviation from the mean.

Therefore, in the given question, the correct answer is E) 1, which means that the season is average and there is no significant deviation from the expected seasonal pattern. The use of seasonal indices is crucial in predicting future trends, identifying anomalies, and making informed decisions in various industries, such as agriculture, retail, and tourism.

Learn more about seasonal index here: brainly.com/question/31811419.

#SPJ11

We know that the probability density function of Y is:

f y(y) =

{-4/y^5 y > 0

{0 otherwise

To find the probability density function (PDF) of Y, we need to first find the cumulative distribution function (CDF) of Y and then differentiate it with respect to Y.

Let Y = 1/X. Solving for X, we get X = 1/Y.

Using the change of variables method, we have:

Fy(y) = P(Y <= y) = P(1/X <= y) = P(X >= 1/y) = 1 - P(X < 1/y)

Since the PDF of X is given by:

fx(x) =

{4x^3 0 <= x <=10

{0 otherwise

We have:

P(X < 1/y) = ∫[0,1/y] 4x^3 dx = [x^4]0^1/y = (1/y^4)

Therefore,

Fy(y) = 1 - (1/y^4) = (y^-4) for y > 0.

To find the PDF of Y, we differentiate the CDF with respect to Y:

f y(y) = d(F) y(y)/d y = -4y^-5 = (-4/y^5) for y > 0.

Therefore, the PDF of Y is:

f y(y) =

{-4/y^5 y > 0

{0 otherwise

This is the final answer.

To know more about probability density function refer here

https://brainly.com/question/30070005#

#SPJ11

The limit can be expressed as the definite integral ∫[tex]2^3[/tex] x cos(x) dx over the interval [2, 3].

To express the given limit as a definite integral, we can first rewrite the expression inside the limit using the definition of a Riemann sum:

n cos(xi) xi δx = Σi=1n cos(xi) xi Δx

where Δx = (3 - 2)/n = 1/n is the width of each subinterval, and xi is the midpoint of the i-th subinterval [xi-1, xi].

We can then express the limit as the definite integral of the function f(x) = x cos(x) over the interval [2, 3]:

lim n→∞ Σi=1n cos(xi) xi Δx = ∫[tex]2^3[/tex] x cos(x) dx

Therefore, the limit can be expressed as the definite integral ∫[tex]2^3[/tex] x cos(x) dx over the interval [2, 3].

for such more question on integral

https://brainly.com/question/27746495

#SPJ11

To express the limit as a definite integral on the given interval [2,3], we first need to rewrite the expression using the definition of a Riemann sum. Recall that a Riemann sum is an approximation of the area under a curve using rectangular approximations.

Given the limit:

lim (n→∞) Σ [n * cos(x_i) * x_i * Δx], i=1 to n, with interval [2, 3]

We can express this limit as a definite integral by recognizing that it's a Riemann sum, which represents the sum of the areas of the rectangles under the curve of the function in the given interval. In this case, the function is f(x) = x * cos(x). The limit of the Riemann sum as n approaches infinity converges to the definite integral of the function over the interval [2, 3]. Therefore, we can write:

lim (n→∞) Σ [n * cos(x_i) * x_i * Δx] = ∫[2, 3] x * cos(x) dx

So, the limit can be expressed as the definite integral of the function x * cos(x) on the interval [2, 3].

To learn more about Riemann sum click here: brainly.com/question/30404402

#SPJ11

A cyclic subgroup of A8 with order 4 is ⟨(1234)⟩. A noncyclic subgroup of A8 with order 4 is ⟨(12)(34), (13)(24)⟩.

To find a cyclic subgroup of A8 with order 4, we need to look for an element that generates a cyclic subgroup of order 4. One such element is (1234), which means it cyclically permutes the elements 1, 2, 3, and 4. The subgroup generated by (1234) is ⟨(1234)⟩, and its order is 4.

To find a noncyclic subgroup of A8 with order 4, we can consider elements that do not generate cyclic subgroups. One such subgroup is ⟨(12)(34), (13)(24)⟩, which consists of the permutations (12)(34) and (13)(24). This subgroup does not have a cyclic structure because neither of its generators generates a cyclic subgroup.

The order of this subgroup is also 4.

For more questions like Subgroup click the link below:

https://brainly.com/question/30865357

#SPJ11

A graph of the image of quadrilateral STUV after applying the sequence of transformations is shown in the image below.

In Mathematics, a reflection across the line y = x would interchange the x-coordinate and y-coordinate, and this can be modeled by the following transformation rule:

(x, y)                                    →              (y, x)

Ordered pair S (9, -4)    →        Ordered pair S' (-4, 9).

Ordered pair T (13, -8)    →        Ordered pair T' (-8, 13).

Ordered pair U (7, -10)    →        Ordered pair U' (-10, 7).

Ordered pair V (3, -10)    →        Ordered pair V' (-10, 3).

By translating quadrilateral S'T'U'V' 17 units right and down 1 unit, the new coordinates of the image include the following:

(x, y)               →                           (x + 17, y - 1)

S' (-4, 9)         →    (-4 + 17, 9 - 1) = S" (13, 8)  

T' (-8, 13)        →    (-8 + 17, 13 - 1) = T" (9, 12)  

U' (-10, 7)         →    (-10 + 17, 7 - 1) = U" (7, 6)  

V' (-10, 3)         →    (-10 + 17, 3 - 1) = V" (7, 2)  

Read more on reflection here: brainly.com/question/20602330

#SPJ1

Common multiples and denominators are both concepts related to numbers, but they have different roles and purposes. Common multiples are used to find numbers that are multiples of two or more given numbers, while denominators specifically refer to the bottom number in a fraction.

Common multiples are numbers that are divisible by two or more given numbers. They are used to find numbers that are evenly divisible by a set of numbers. For example, the common multiples of 3 and 4 are 12, 24, 36, etc., as these numbers are divisible by both 3 and 4.

Denominators, on the other hand, are specific to fractions. In a fraction, the denominator represents the bottom number, indicating the total number of equal parts into which the whole is divided. It determines the size and proportion of each part of the fraction. For instance, in the fraction 3/5, the denominator is 5, indicating that the whole is divided into five equal parts.

While common multiples involve finding numbers divisible by given numbers, denominators are exclusively used in fractions to represent the number of equal parts in a whole. In this way, they serve different purposes. However, they are alike in the sense that they both deal with numbers and can be used in mathematical calculations and relationships.

Learn more about  Common multiples here :

https://brainly.com/question/2550150

#SPJ11

Answer:

595

Step-by-step explanation:

557+38=595

rule here is to start by 453 add by 38

Answer:

$25

Step-by-step explanation:

We Know

She has saved $15, which is three-fifths of the total cost of the game

How much does the game cost?

$15 = 3/5

$5 = 1/5

We Take

5 x 5 = $25

So, the cost of the game is $25.

a) To prove the inequality (E(X1X2))2≤E(X21)E(X22), we can start by expanding the square on the left-hand side:
(E(X1X2))2 = (cov(X1,X2) + E(X1)E(X2))2
= cov(X1,X2)2 + 2cov(X1,X2)E(X1)E(X2) + (E(X1)E(X2))2
Using the fact that cov(X1,X2) = E(X1X2) - E(X1)E(X2), we can rewrite the above expression as:
E(X1X2)2 - 2E(X1X2)E(X1)E(X2) + E(X1)2E(X2)2
Now, note that for any real number t, E((tX1−X2)2)≥0. This means that the discriminant of the quadratic expression t2E(X1)2 - 2tE(X1X2) + E(X2)2 is non-positive. Therefore,
(E(X1X2))2 - E(X21)E(X22) ≤ 0
which proves the desired inequality.
b) Using part (a), we have:
rho2 = (cov(X1,X2) / (sd(X1)sd(X2)))2 ≤ 1
where sd(X1) and sd(X2) are the standard deviations of X1 and X2, respectively.
Since the standard deviations are positive, we can take the square root of both sides to obtain:
|rho| ≤ 1

Part (a) is proven by expanding the square on the left-hand side and using the fact that E((tX1−X2)2)≥0 for any real number t. Part (b) follows from part (a) and the fact that the correlation coefficient is bounded between -1 and 1.

To know more standard deviation visit:

https://brainly.com/question/23907081

#SPJ11

To calculate the 4-period centered moving average associated with period 6, we need to consider the values of the series in a window of four periods centered around period 6.

The window would include the values from periods 4, 5, 6, and 7.

Observation: 4 5 6 7

Value: 12 20 21 21

To calculate the centered moving average, we sum up the values in the window and divide by the number of periods in the window.

Average = (12 + 20 + 21 + 21) / 4 = 74 / 4 = 18.5

Therefore, the value of the 4-period centered moving average associated with period 6 is 18.5.

The correct answer is option b. 18.500

Learn more about centered moving average here:

https://brainly.com/question/29509932

#SPJ11

Yes, Yt can be rewritten as Yt = et + et-1 + ... + e1. The mean function of Yt is E(Yt) = E(et + et-1 + ... + e1) = 0. The variance function for Yt is Var(Yt) = tσe^2.

(a) Yes, Yt can be rewritten as Yt = et + et-1 + ... + e1.

We can see this by induction. For t = 1, we have Y1 = e1. Assume that the result holds for some k, i.e., Yk = ek + ek-1 + ... + e1. Then, for k+1, we have:

Yk+1 = Yk + ek+1

= ek + ek-1 + ... + e1 + ek+1

= ek + ek-1 + ... + e1 + ek+1 + 0

Thus, the result holds for all t.

(b) The mean function of Yt is E(Yt) = E(et + et-1 + ... + e1) = 0.

Since the expected value of each et is 0, the expected value of Yt is also 0.

(c) The variance function for Yt is Var(Yt) = tσe^2.

Using the result from part (a), we can write:

Yt = et + et-1 + ... + e1

Taking the variance of both sides, we get:

Var(Yt) = Var(et + et-1 + ... + e1)

= Var(et) + Var(et-1) + ... + Var(e1)

= tσe^2

(d) The autocovariance function for Yt is γ(t,s) = min(t,s)σe^2.

Using the result from part (a), we can write:

Yt = et + et-1 + ... + e1

Then, for s < t, we have:

YtYs = (et + et-1 + ... + es+1 + es)(es + es-1 + ... + e1)

Expanding the product and taking the expected value, we get:

E(YtYs) = E(etes + et-1es + ... + es+1es + es^2 + eses-1 + ... + es e1)

= E(etes) + E(et-1es) + ... + E(es+1es) + E(es^2) + E(eses-1) + ... + E(es e1)

= min(t,s)σe^2

For s > t, we can use the symmetry of the autocovariance function to get:

γ(t,s) = γ(s,t) = min(s,t)σe^2

(e) No, Yt is not stationary.

From part (b), we know that E(Yt) = 0 for all t. From part (c), we know that Var(Yt) = tσe^2, which depends on t. Therefore, Yt cannot be stationary.

Learn more about variance here

https://brainly.com/question/15858152

#SPJ11

Answer: 24.2

Step-by-step explanation: its right

Answer:

£25

Step-by-step explanation:

ratio 5:3 means there are 5 + 3 = 8 parts.

40/8 = 5.

we have 5(5) + 3(5) = 25 + 15 = 40.

the largest part is  £25.

The solution of the subtraction is 639.

When subtracting 748 from 109, we notice that 748 is a much larger number than 109. This suggests that we will not be able to subtract 748 from 109 entirely, resulting in a negative answer. However, we can still proceed with finding out how many times 748 fits into 109.

To find out how many times 748 fits into 109, we perform a division operation. Divide 109 by 748, and you will get the quotient (whole number) and remainder.

109 ÷ 748 = Quotient (0) + Remainder (109)

In this case, the quotient is 0, and the remainder is 109. The quotient of 0 suggests that 748 does not fit into 109 even once without going into negative values. However, the remainder of 109 is crucial information that tells us the remaining amount after performing the subtraction operation.

Since 748 does not fit into 109 without resulting in negative numbers, we cannot find a straightforward answer to the subtraction problem. However, if we wanted to find the difference between the two numbers, we could express it as:

109 - 748 = -639

Here, the negative sign indicates that the result is negative. In this context, we can interpret the subtraction as "109 is 639 less than 748." So, while we cannot subtract 748 from 109 directly, we can determine the relative difference between the two numbers.

To know more about subtract here

https://brainly.com/question/13619104

#SPJ4

The series converges on the interval from 7 inclusive to 9 exclusive.

To find the radius of convergence, we use the ratio test:

So the series converges absolutely if |x - 8| < 1, and diverges if |x - 8| > 1. Therefore, the radius of convergence is R = 1.

To find the interval of convergence, we need to test the endpoints x = 7 and x = 9:

When x = 7, the series becomes:

[infinity] (-1)ⁿ (n+9) / (n+1)

n = 0

which is an alternating series that satisfies the conditions of the alternating series test. Therefore, it converges.

When x = 9, the series becomes:

[infinity] 1 / (n+1)

n = 0

which is a p-series with p = 1, which diverges.

Therefore, the interval of convergence is [7, 9).

Learn more about p-series

brainly.com/question/30880784

#SPJ11

A. Brazil is in the 30th percentile in terms of Olympic medal count in this dataset.

B. Japan is in the 40th percentile in terms of Olympic medal count in this dataset.

C. Russia is in the 50th percentile in terms of Olympic medal count in this dataset.

D. China is in the 90th percentile in terms of Olympic medal count in this dataset.

A. To find the percentile rank of Brazil, we need to first determine the total number of countries in the dataset. In this case, there are 10 countries.

Next, we need to determine how many countries Brazil outperformed in terms of medal count. Looking at the table, we can see that Brazil has more medals than 3 countries (Australia, New Zealand, and Brazil itself) and less than 6 countries (Canada, China, France, Great Britain, Japan, and the United States).

Therefore, the percentile rank of Brazil can be calculated as follows:

Percentile rank of Brazil = (number of countries Brazil outperformed / total number of countries) x 100%

= (3 / 10) x 100%

= 30%

B. To find the percentile rank of Japan, we can follow the same approach as above.

Number of countries Japan outperformed: 4 (Australia, Brazil, Canada, and New Zealand)

Number of countries Japan was outperformed by: 5 (China, France, Great Britain, Russia, and the United States)

Percentile rank of Japan = (number of countries Japan outperformed / total number of countries) x 100%

= (4 / 10) x 100%

= 40%

C. To find the percentile rank of Russia, we can follow the same approach as above.

Number of countries Russia outperformed: 5 (Australia, Brazil, Canada, New Zealand, and Japan)

Number of countries Russia was outperformed by: 4 (China, France, Great Britain, and the United States)

Percentile rank of Russia = (number of countries Russia outperformed / total number of countries) x 100%

= (5 / 10) x 100%

= 50%

D. To find the percentile rank of China, we can follow the same approach as above.

Number of countries China outperformed: 9 (Australia, Brazil, Canada, France, Great Britain, Japan, New Zealand, Russia, and the United States)

Number of countries China was outperformed by: 0

Percentile rank of China = (number of countries China outperformed / total number of countries) x 100%

= (9 / 10) x 100%

= 90%

for such more question on  percentile

https://brainly.com/question/24877689

#SPJ11

To find the percentile rank of each country, we need to determine how many countries have a lower total medal count and then divide that number by the total number of countries (which is 10 in this case) and multiply by 100.

A. Brazil:
There are 9 countries with a higher total medal count than Brazil, so its percentile rank is (9/10) x 100 = 90th percentile.

B. Japan:
There are 5 countries with a lower total medal count than Japan, so its percentile rank is (5/10) x 100 = 50th percentile.

Learn more about percentile here : brainly.com/question/1561673

#SPJ11

The reflection of vector v=[293] in the line l that consists of all scalar multiples of the vector w=[22−1] is [-17, 192, 73].

The reflection of vector v=[293] in the line l that consists of all scalar multiples of the vector w=[22−1] is [-17, 192, 73].

To find the reflection of vector v in the line l, we need to decompose vector v into two components: one component parallel to the line l and the other component perpendicular to the line l. The component parallel to the line l is obtained by projecting v onto w, which gives us:

proj_w(v) = ((v dot w)/||w||^2) * w = (68/5) * [22,-1] = [149.6, -6.8]

The component perpendicular to the line l is obtained by subtracting the parallel component from v, which gives us:

perp_w(v) = v - proj_w(v) = [293,0,0] - [149.6, -6.8, 0] = [143.4, 6.8, 0]

The reflection of v in the line l is obtained by reversing the direction of the perpendicular component and adding it to the parallel component, which gives us:

refl_l(v) = proj_w(v) - perp_w(v) = [149.6, -6.8, 0] - [-143.4, -6.8, 0] = [-17, 192, 73]

Therefore, the reflection of vector v=[293] in the line l that consists of all scalar multiples of the vector w=[22−1] is [-17, 192, 73].

Learn more about reflection here

https://brainly.com/question/29788343

#SPJ11

The probability that the second card is a jack given that the first card was a 2 is 52/51.

To calculate the probability that the second card is a jack given that the first card was a 2, we need to consider the remaining cards in the deck after the first card is drawn.

When the first card is drawn and it is a 2, there are 51 cards remaining in the deck, out of which there are 4 jacks.

The probability of drawing a jack as the second card, given that the first card was a 2, can be calculated using conditional probability:

P(Second card is a jack | First card is a 2) = P(Second card is a jack and First card is a 2) / P(First card is a 2)

Since the first card is already known to be a 2, the probability of the second card being a jack and the first card being a 2 is simply the probability of drawing a jack from the remaining 51 cards, which is 4/51.

The probability of the first card being a 2 is simply the probability of drawing a 2 from the initial deck, which is 4/52.

P(Second card is a jack | First card is a 2) = (4/51) / (4/52)

Simplifying the expression:

P(Second card is a jack | First card is a 2) = (4/51) * (52/4)

P(Second card is a jack | First card is a 2) = 52/51

To learn more about probability click here:

brainly.com/question/30736116

#SPJ11

The probability that event E occurs, given that the odds in favor are 8 to 3, is approximately 0.727. The correct option is (c).

For the probability of event E occurring when the odds in favor are 8 to 3, we can use the formula for odds and probability conversion.

The odds in favor of event E occurring are given as 8 to 3. This means that for every 8 favorable outcomes, there are 3 unfavorable outcomes. In total, there are 8 + 3 = 11 outcomes.

To calculate the probability, we divide the number of favorable outcomes by the total number of outcomes.

The number of favorable outcomes is 8, and the total number of outcomes is 11. Therefore, the probability of event E occurring is 8/11.

Converting this to a decimal, we find that the probability is approximately 0.727.

It is important to note that odds are different from probabilities. Odds represent the ratio of favorable to unfavorable outcomes, while probabilities represent the likelihood of an event occurring on a scale from 0 to 1.

So, the probability that event E occurs is approximately 0.727, which corresponds to choice (c).

To know more about probability refer here :

https://brainly.com/question/16722133#

#SPJ11

The values, we get ; Percentage = (0.5/2.5) x 100= 20%.Therefore, the sugar required in the recipe is 20% of the quantity usually purchased by a household.

When given a recipe, it is essential to know how to convert the recipe from the metric to the US customary system and then to a percentage. For domestic purposes, sugar is usually purchased in 2.5kg. We can calculate the sugar required in the recipe as a percentage of the amount usually purchased by the household using the following steps:

Step 1: Convert the sugar required in the recipe from grams to kilograms.

Step 2: Calculate the percentage of the sugar required in the recipe to the quantity purchased by a household, usually 2.5 kg.  Let's say the recipe requires 500g of sugar.

Step 1: We need to convert 500g to kg. We know that 1000g = 1kg, so 500g = 0.5kg.

Step 2: We can now calculate the percentage of the sugar required in the recipe as a percentage of the amount usually purchased by a household, which is 2.5kg.

We can use the following formula: Percentage = (amount of sugar required/quantity purchased by household) x 100. Substituting the values, we get; Percentage = (0.5/2.5) x 100= 20%.Therefore, the sugar required in the recipe is 20% of the quantity usually purchased by a household.

To know more about Percentage visit :

https://brainly.com/question/3188366

#SPJ11

The volume of the pill is 452.39mm³.

A volume is a scalar number that expresses the amount of three-dimensional space enclosed by a closed surface.

The height of the cylindrical portion is 12mm

The overall height is 18mm.

So, radius of hemisphere at any one end will be half the difference between cylindrical portion and the overall height.

The radius of the sphere is:

= (18mm - 12mm)/2

= 3mm

The volume of the capsule is :

= Volume of cylinder +2(Volume of the hemisphere)

= (πR²h) + 2[(4/6)πR³]

= (π×3²×12) + 2[(4/6)×π×3³]

= 339.292mm³ + 113.0973mm³

= 452.3893 mm³

= 452.39 mm³

Full question:

A pill has the shape of a cylinder with a hemisphere at each end. The height of the cylindrical portion is 12mm and the overall height is 18mm. Find the volume of the pill in cubic millimeters.

Read more about volume

brainly.com/question/14197390

#SPJ1

David is a salesman for a local Ford dealership. He is paid a percentage of the profit the dealership makes on each car. If the profit is under $800, the commission is 25%.

If the profit is at least $800 and less than $1,000, the commission rate is 27.5% of the profit. If the profit is $1,000 or more, the rate is 30% of the profit.

Let's find the difference between the commission paid if David sells a car for a $1,000 profit and the commission paid if he sells a car for a $799 profit. We'll begin by finding the commission paid if David sells a car for a $1,000 profit.Commission paid on a $1,000 profit=.30(1,000)=300

Therefore, if David sells a car for a $1,000 profit, his commission is $300. Let's move on to finding the commission paid if he sells a car for a $799 profit. Commission paid on a $799 profit=.25(799)=199.75Therefore, if David sells a car for a $799 profit, his commission is $199.75.The difference between these commissions is:$300-$199.75=$100.25

Therefore, the difference between the commission paid if David sells a car for a $1,000 profit and the commission paid if he sells a car for a $799 profit is $100.25.

To know more about percentage visit:

https://brainly.com/question/32197511

#SPJ11

The final integration result is ∫1/2 dx/x^2√x^2+196 = (2/√7) + C, where C is the constant of integration.

We start by making the given substitution:

x = 14 tan(θ), dx = 14 sec^2(θ) dθ

Substituting these into the integral, we get:

∫1/2 dx/x^2√x^2+196 = ∫tan(θ) dθ/(196tan^2(θ)+196)^(1/2)

= ∫tan(θ) dθ/14(sec^2(θ))^(3/2)

= ∫sin(θ)/14 dθ/cos^3(θ)

Using the trigonometric identity 1 + tan^2(θ) = sec^2(θ), we get:

sin(θ) = 14 tan(θ)/√(196 tan^2(θ) + 196) = x/√(x^2 + 196)

Therefore, the integral becomes:

∫dx/(x^2 + 196)^(1/2) = ∫sin(θ)/14 dθ/cos^3(θ)

= ∫x/14(x^2 + 196)^(1/2) dx

Using the substitution u = x^2 + 196, du/dx = 2x, we get:

∫x/14(x^2 + 196)^(1/2) dx = (1/28) ∫du/u^(1/2)

= (1/28) (2u^(1/2)) + C

= (1/14) (x^2 + 196)^(1/2) + C

Substituting back x = 14 tan(θ), we get:

(1/14) (x^2 + 196)^(1/2) = (1/14) (196 tan^2(θ) + 196)^(1/2)

= (1/14) (196 sec^2(θ))^(1/2) = 2/√7

Therefore, the final answer is:

∫1/2 dx/x^2√x^2+196 = (2/√7) + C, where C is the constant of integration.

Learn more about "integration ":

https://brainly.com/question/22008756

#SPJ11

The rule that describes the center of the new circle after the translation is:

(x, y) → (5 + m, -8 + p)

In this rule, the original x-coordinate (5) is shifted by m units to the left, resulting in (5 + m).

The original y-coordinate (-8) is shifted p units up, resulting in (-8 + p).

These adjustments in the x and y coordinates represent the translation of the circle.

Therefore, the new center coordinates of the translated circle are (5 + m, -8 + p).

Learn more about Translation here:

https://brainly.com/question/29712965

#SPJ1