Now
Frequency:-
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{T}[/tex]
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{2.5\times 10^{-3}}[/tex]
[tex]\\ \rm\rightarrowtail \nu=0.4\times 10^{3}[/tex]
[tex]\\ \rm\rightarrowtail \nu=400Hz[/tex]
The frequency for this time will be 400 Hz.
What is the frequency?Frequency is defined as the ratio of the number of waves to time. It is denoted by f.
f=[tex]\frac{1}{T}[/tex] where,
f is the frequency and,
T is the time period.
SI unit of frequency is Hz.
There are different types of frequency in sound :
Infrasonic-The frequency is less than 20 Hz.Audible-The frequency is between 20Hz to 20,000 Hz.Ultrasonic-The frequency is greater than 20,000 Hz.According to the question :
Given :
T= 2.50×[tex]10^{-3}[/tex]
f=[tex]\frac{1}{T}[/tex]
⇒f=1/(2.50×[tex]10^{-3}[/tex])
⇒400 Hz
Hence, the frequency for this time will be 400 Hz.
For more information about frequency :
https://brainly.com/question/5102661
#SPJ2
If you wanted to melt ice, then heat it up, and get the water to just barely vaporize, how many equations would you need to solve for the energy used in this procedure?
Two equations will be needed to solve for the energy used in this procedure.
What is Energy?This is defined as the ability or capacity to do work. Ice being converted to vapor requires energy and the equations are seen below:
H₂O₍s₎ ⇒ H₂O₍l₎
H₂O₍l₎ ⇒ H₂O₍g₎
These are the equations which are used to calculate energy with heat being involved in both reactions.
Read more about Energy here https://brainly.com/question/19666326
What is the electric potential energy of a charge that experiences a force of 3. 6 × 10–4 N when it is 9. 8 × 10–5 m from the source of the electric field? 3. 5 × 10–8 J 4. 6 × 10–4 J 2. 7 × 10–1 J 3. 7 × 100 J.
The electric potential energy of the charge will be =3.5*10^8 J
What is Electric potential energy?Electric potential energy is the energy that is needed to move a charge against an electric field.
F=Force experienced by the charge = 3.6*10^-4 N
q1 = magnitude of charge producing the electric field
q2 = magnitude of charge experiencing the electric force
r1 = distance between the two charges
Electric force experienced by the charge is given using coulomb's law as
[tex]F=\dfrac{kq_1q_2}{r^2}[/tex]
[tex]3.6\times 10^{-4}=\dfrac{9\times 10^9 q_1q_2}{(9.8\times 10^{-5})^2}[/tex]
[tex]q_1q_2=3.84\times 10^{-22}[/tex]
Electric potential energy of the charge can be given as
[tex]U=\dfrac{kq_1q_2}{r}[/tex]
[tex]U=\dfrac{(9\times 10^9)q_1q_2}{(9.8\times 10^{-5})^2}[/tex]
[tex]U=3.5\times 10^{-8}\ J[/tex]
Thus Electric potential energy of the charge can be given as [tex]U=3.5\times 10^{-8}\ J[/tex]
To know more about Electric potential energy follow
https://brainly.com/question/14306881
What is the tension of the string if the cylinder has an acceleration of
In physics, the tension on a suspended object said to be equal to the weight of the object plus or minus the mass of the object times the acceleration acting on it.
~ ISS
The particles that make up matter are ______, ions or molecules.
Answer:
Atoms.
Explanation:
Atoms are purely one bit of an element. Ions are positive or negative atoms. Molecules are not pure, they have other stuff with it.
The amount of potential energy possessed by an elevated object is:.
dont use me for points please i need help, (circuits for physics)
Answer:
B, A, A, B
Explanation:
Just trust me on this one.
4. Point B on a wheel of radius 40 cm that is rotating at a constant 5. 0 revolutions
per second is located 0. 20 m from the axis of rotation. Pont A is just at the border
of the wheel. See the figure.
a) What is the angular velocity of the wheel in rad/s?
b) What point has a greater linear speed, A or B? Calculate both speeds and
compare the results.
c) What are the centripetal accelerations of points A and B due to the spin of the
wheel? Sketch the situation and represent the vectors linear velocity and
centripetal acceleration in points A and B. Assume the rotation of the wheel
to be clockwise.
Answer:
SD
Explanation:
Which terrestrial planet exhibits retrograde rotation?.
Answer:
Planets that are farther from the sun than the earth (all but Mercury and Venus) will exhibit retrograde motion.
If the position of the planet is observed relative to the background stars, the planet will appear to move backward relative to the stars when the earth is moving in an Eastward direction faster than the planet, and the planet appears to move backwards relative to the stars
(The planet will be on the side of the earth that is opposite that of the sun)
How does energy affecf a wave?
Which choice most accurately traces the flow of electrons in the circuit?
this is wrong
Electrons move counterclockwise from side B of the battery to side A of the battery through each lightbulb.
Electron flow out of the negative terminal, through the circuit and into the positive terminal of the source is accurate about Electron flow.
What is electron flow?Electron flow is the current produced by the movement of free electrons moving along a positive terminal; the direction of electron flow is opposite to that of current.
Electron flow out of the negative terminal, through the circuit and into the positive terminal of the source.
Therefore, Electron flow out of the negative terminal, through the circuit and into the positive terminal of the source is accurate about Electron flow.
Learn more about Electron flow here.
https://brainly.com/question/22385977
Seismic waves do not travel along the Earth’s surface. Please select the best answer from the choices provided T F.
Seismic waves do not travel along the Earth’s surface. The statement is false.
what are seismic waves?
The seismic waves can be defined as the waves full of energy that travel through the Earth's layer, these waves are the result of earthquake.
They can further be divided into two types body wave and surface waves. The body waves travel in the interior of the Earth and the surface waves travel at the surface of the Earth.
The seismic waves can have an amplitude of few centimeters in large earthquake. They travel slower as compared to the body waves.
Hence Seismic waves do not travel along the Earth’s surface. The statement is false.
To know more about Seismic waves follow
https://brainly.com/question/6835759
Answer:
False
Explanation:
Ed 2022
Imagine a situation : If people could not see colours, then how would traffic lights work ? Design a traffic system that does not rely on colors.
Answer:
position
Explanation:
Okay, so this already exists
Colorblind people use the position of the light
Red on top, yellow in middle, green on bottom
A block of mass 3. 0 kg is hung from a spring, causing it to stretch 12 cm at equilibrium, as shown above. The 3. 0 kg block is then replaced by a 4. 0 kg block, and the new block is released from the position shown above, at which the spring is unstretched. How far will the 4. 0 kg block fall before its direction is reversed?.
Answer: 32 cm
Explanation:
A carrot has a mass of 69 grams and a volume of 150 cubic centimeters. Calculate its
density.
Answer:
As Per Provided Information
Mass of carrot 69 grams
Volume of carrot 150 cm³
we have been asked to determine the density of carrot .
Using Formulae
[tex] \bf \: Density = \cfrac{Mass \: of \: carrot}{Volume \: of \: carrot}[/tex]
Substituting the given value and let's solve it to determine the density of carrot.
[tex] \longrightarrow\sf \: Density = \cfrac{69}{150} \\ \\ \\ \longrightarrow\sf \: Density = \cancel\cfrac{69}{150} \\ \\ \\ \longrightarrow\sf \: Density =0.46 \: gm \: {cm}^{ - 3} [/tex]
Therefore,
Density of carrot is 0.46 gm/cm³Two blocks each of mass m are attached to the ends of a massless rod
The net torque on this system is (ml2g-ml1g)k
What is Torque?
This refers to the type of force that causes rotation in objects which has mass and is a twisting force
Based on the complete question, we can see the given parameters:
The torque due to farther mass above the pivot is ml2gk
The torque due to nearer mass about the pivot is ml1gk
Therefore, the net torque is (ml2g-ml1g)k
Read more about torque here:
https://brainly.com/question/14839816
The net torque on this system in which two blocks each of mass m are attached to the ends of a massless rod, above pivot, is (ml₂g-ml_₁g)\hat k.
What is torque?The torque of a body is the rate of change of angular momentum of the body. Torque is the product of moment of inertia and the angular acceleration.[tex]\tau =I\times \alpha[/tex][tex]\tau=mlg[/tex]
Here, (I) is the moment of inertia and (α) is the angular acceleration.
Two blocks each of the mass m are attached to the ends of a massless rod which pivots as shown in fig.
Initially, the rod is held in the horizontal position and then released. When, the mass was kept at farther to pivot, then the value of torque is,
[tex]\tau=ml_2g\hat k[/tex]
When, the mass was kept at nearer to pivot, then the value of torque is,
[tex]\tau=-ml_1g\hat k[/tex]
Thus, the net torque on this system above pivot is,
[tex]\tau=ml_2g\hat k+(-ml_2g\hat k)\\\tau=(ml_2g-ml_1g)\hat k[/tex]
Thus, the net torque on this system in which two blocks each of mass m are attached to the ends of a massless rod, above pivot is (ml₂g-ml_₁g)\hat k.
Learn more about the torque here;
https://brainly.com/question/25482609
#SPJ4
When a 10-V battery is connected to a resistor, 2 A of current flow in the resistor. What is the resistor's value
Hi there!
We can use Ohm's law to solve:
[tex]V = IR[/tex]
V = Potential Difference (V)
I = Current (A)
R = Resistance (Ω)
We can rearrange the equation to solve for resistance:
[tex]R = \frac{V}{I}[/tex]
Plug in the given values to solve.
[tex]R = \frac{10}{2} = \boxed{5 \Omega}[/tex]
If a train going 60 m/s hits the brakes, and it takes the train 85 seconds to stop, what is
the train's acceleration?
Question :-
If a Train going with 60 m/s Speed hits the Brakes, and takes 85 sec to stop. What is the Acceleration of the Train ?Answer :-
Acceleration of Train is 0.70 m/s² .Explanation :-
As per the provided information in the given question, we have been given that the Speed of the Train is 60 m/s . Time taken to stop the Train is 85 sec . And, we have been asked to calculate the Acceleration of the Train .
For calculating the Acceleration , we will use the Formula :-
[tex] \bigstar \: \: \: \boxed { \sf{ \: Acceleration \: = \: \dfrac{v \: - \: u}{t} \: }} \\ [/tex]
Where ,
V denotes to Final Velocity .U denotes to Initial Velocity .T denotes to Time Taken .Therefore , by Substituting the given values in the above Formula :-
[tex] \dag \: \: \: \: \sf{Acceleration \: = \: \dfrac{Final \: Velocity \: - \: Initial \: Velocity}{Time} } \\ [/tex]
[tex] \longmapsto \: \: \: \sf{Acceleration \: = \: \dfrac{0 \: - \: 60}{85} } \\ [/tex]
[tex] \longmapsto \: \: \: \sf{Acceleration \: = \: \dfrac{60}{85} } \\ [/tex]
[tex] \longmapsto \: \: \: \textbf {\textsf {Acceleration \: = \: 0.70 }} [/tex]
Hence :-
Acceleration = 0.70 m/s² .[tex] \underline {\rule {210pt} {4pt}} [/tex]
Note :-
Kindly Scroll the Screen from Right to Left for Better View .Answer:
Question :-
If a Train going with 60 m/s Speed hits the Brakes, and takes 85 sec to stop. What is the Acceleration of the Train ?
Answer :-
Acceleration of Train is 0.70 m/s² .
Explanation :-
As per the provided information in the given question, we have been given that the Speed of the Train is 60 m/s . Time taken to stop the Train is 85 sec . And, we have been asked to calculate the Acceleration of the Train .
For calculating the Acceleration , we will use the Formula :-
\begin{gathered} \bigstar \: \: \: \boxed { \sf{ \: Acceleration \: = \: \dfrac{v \: - \: u}{t} \: }} \\ \end{gathered}
★
Acceleration=
t
v−u
Where ,
V denotes to Final Velocity .
U denotes to Initial Velocity .
T denotes to Time Taken .
Therefore , by Substituting the given values in the above Formula :-
\begin{gathered} \dag \: \: \: \: \sf{Acceleration \: = \: \dfrac{Final \: Velocity \: - \: Initial \: Velocity}{Time} } \\ \end{gathered}
†Acceleration=
Time
FinalVelocity−InitialVelocity
\begin{gathered} \longmapsto \: \: \: \sf{Acceleration \: = \: \dfrac{0 \: - \: 60}{85} } \\ \end{gathered}
⟼Acceleration=
85
0−60
\begin{gathered} \longmapsto \: \: \: \sf{Acceleration \: = \: \dfrac{60}{85} } \\ \end{gathered}
⟼Acceleration=
85
60
\longmapsto \: \: \: \textbf {\textsf {Acceleration \: = \: 0.70 }}⟼Acceleration = 0.70
Hence :-
Acceleration = 0.70 m/s² .
\underline {\rule {210pt} {4pt}}
Note :-
Kindly Scroll the Screen from Right to Left for Better View .
Students in science are studying solutions and the dissolving rate of solids. One group was given some instant lemonade mix to dissolve. They used a packet of lemonade crystals and a packet of lemonade powder. The students dissolved the same amount of each solid into 100 ml of water. They varied the water temperature. List ALL the possible conclusions based the data the students collected?
Answer:
a-d
Explanation:
hope this helps
What is the difference between a moon and a planet.
Answer:
A planet revolves around the Sun and a moon orbits a planet. Technically, the moon also orbits the Sun as it spins around its planet, but because it has its own sub-orbit of a planet scientists define it as a moon. All planets in our solar system, except for Mercury and Venus, have moons. Earth has one moon, Mars has two, Neptune has thirteen, Uranus has twenty-seven, Jupiter has sixty-six, and Saturn has sixty-two. Pluto, now classified as a dwarf planet, has five moons.
Two equivalent sinusoidal waves travel toward each other on a spring they interfere. What if the waves traveling toward each other aren't sinusoidal but a series of pulses as seen in the picture? What effect does this have on the spring?
Answer:
Superposition would take place
Explanation:
The waves would interfere with one another either in the form of Constructive Interference or Destructive Interference.
Which scientist received a nobel prize for the discovery of x-rays?.
Answer:
That's Rontgen
Explanation:
Wilhem Rontgen
If a number of coplanar forces acting on a particle are in equilibrium, then
Explanation:
Then the algebraic sum of the moment of all the forces about any point is equal to the moment of the resultant force about the same point
If a number of coplanar forces acting on a particle are in equilibrium. then the moment of their resultant is equal to the sum of their individual moment.
What is the law of moments?If a number of co-planar forces operating on a particle are in equilibrium, the algebraic sum of their moments about any point equals the moment of their resultant force about the same point, according to the law of moments.
Hence If a number of coplanar forces acting on a particle are in equilibrium. then the moment of their resultant is equal to the sum of their individual moment.
To learn more about the law of moments refer to the link;
https://brainly.com/question/13735588
#SPJ4
A proton is moving south with a speed of 4500 m/s in a magnetic field of 5500 T directed into the page. Determine the magnitude and direction of the magnetic force on the charge.
a.3.96 x 10-12 N west
b.1.55 x 1026 west
c.1.55 x 1026 east
d.3.96 x 10-12 N east
Answer:
F = q V X B
V is south and B is into the page
The resultant vector is directed to the East
F = 1.6E-19 * 4.5E3 * 5.5E3 N = 3.96 N East
(Note q is negative for an electron producing a force in the opposite direction)
Control rods are used to slow down the reaction in the reactor core when the core becomes too hot. please select the best answer from the choices provided t f
In nuclear reactors, control rods are used because reactions that occur in a nuclear reactor are highly exothermic in nature.
What is a nuclear reactor?A nuclear reactor is an apparatus or structure in which radioactive material can be made to undergo a commanded, self-sufficient nuclear reaction with the resultant release of energy.
Therefore, when these control rods are infused in a nuclear reactor, than it absorbs the neutrons and helps to control the chain reaction. As a result, the rate of chain reaction gets in control.
Thus, we can conclude that the statement control rods are used to slow down the reaction in the reactor core when the core becomes too hot is a true statement.
Thus In nuclear reactors, control rods are used because reactions that occur in a nuclear reactor are highly exothermic in nature.
To know more about Nuclear reactor follow
https://brainly.com/question/24295936
Answer:
TRUE ( T )
Explanation:
Just took the test on edge
Which statement describes the force diagram? the forces are balanced. the box will move to the right. the box will move to the left. the forces are unbalanced.
The answer will be A The forces are balanced. Force is an external agent applied on any object to displace it from its position. Force is a vector quantity, so with magnitude it also requires direction.
what is force?Force is an external agent applied on any object to displace it from its position. Force is a vector quantity, so with magnitude it also requires direction. Direction is necessary to examine the effect of the force and to find the equilibrium of the force.
The length of each arrow represents the magnitude of each force, while the direction of each arrow represents the direction of each force.
From the diagram, we see that the four arrows have all same length: this means that the four forces have same magnitude, therefore they are balanced in pair. In fact:
On the vertical direction, the normal reaction ([tex]F_N[/tex]) balances the weight of the box ([tex]F_g[/tex])
On the horizontal direction, the push ([tex]F_P[/tex]) balances the force of friction ([tex]F_f[/tex])
Hence the answer will be A. the forces are balanced.
To know more about Force follow
https://brainly.com/question/25239010
Answer:
A is your answer.
Explanation:
Good luck on your exam!
Two metal spheres having charges of 4. 0 × 10–6 coulomb and 2. 0 × 10–5 coulomb, respectively, are brought into contact and then separated. After separation, the charge on each sphere is
Answer:
12*10^(-6) or 1.2*10^(-5)
Explanation:
if both of spheres are in same size.
q after = (q1+q2)/2 = ( (4.0 + 20.0)*10^(-6) )/2 = 12*10^(-6) or 1.2*10^(-5)
How much energy does a pair of hair straighteners transfer every second
Answer:
It depends...
Explanation:
If you know how much watts the pair of hair straighteners use, you can use that as the energy every second. A normal flat iron for hair would be 300 watts, so we could say that it uses 300 jolts or watts of energy per second.
Find the kinetic energy k of the block at the moment labeled b. express your answer in terms of k and a.
The position of the object can be used to find the kinetic energy in terms of k and a.
What is kinetic energy?The term kinetic energy refers to the energy of an object that is in motion. The question is incomplete hence the syetem is not shown and the value of the kinetic energy can not be found in terms of k and a.
Hence, when the system is shown, we can look at the position of the system and use it to obtain the value of the kinetic energy in terms of k and a.
Learn more about kinetic energy: https://brainly.com/question/12669551
Answer:
K = 3/8k(A)^2
Explanation: Potential Energy --> Conservation of Energy
Because block B is at A/2, U = 1/2k(A/2)^2 which equals U = 1/8k(A)^2.
Now that you have the equation for potential energy, you can find kinetic energy in terms of the spring constant (k) and amplitude (A).
K = 3/8 k A^2
Infrared light and visible light are both waves on the electromagnetic spectrum. Identify two
other similarities between infrared and visible light.
Answer:
Both travel in straight line
A round tube weighs 30 lbs. If the tube is stood on end it pushes down on the floor with a pressure of
2 lbs/in?. How many square inches is the end of the tube?
Answer:
15in2
Explanation:
The diagram shows part of a radio antenna.The plastic tube protects the radio antenna from bad weather.Dust particles carried by the wind rub against the plastic tube.After some time, the dust particles cause the tube to become positively charged.State the property of plastic that allows it to become electrostatically charged.
Have a good day!! :>