Use pattern blocks to represent each multiplication equation. Use the trapezoid to
represent 1 whole.
a. 3 • 1/3 = 1
b. 3 • 2/3 = 2

The time it will take for the rescued sailors to be 57 miles from their life boat is given as follows:

3.35 hours.

Relative velocity is obtained considering the direction in which the objects are traveling, as follows:

For this problem, the sailors and the lifeboat are traveling in opposite directions, hence the relative velocity, considering each of their velocities is given as follows:

v = 14 + 3 = 17 miles.

(meaning that they get 17 miles farther each hour).

Velocity is distance divided by time, hence the time it will take for them to be 57 miles apart is given as follows:

17 = 57/t

17t = 57

t = 57/17

t = 3.35 hours.

More can be learned about relative velocity at https://brainly.com/question/13363067

#SPJ1

Therefore , the answer to the above problem is 5.75 for the mean and 9 for the median.

Regardless of whether many elements are discrete or continuous, averages can only be calculated for numeric variables. You may find this by dividing the amount of values present in the dataset by its total number of values in the data. It is possible to perform computations using either raw data or data that has been compiled into frequency tables. The average value in mathematics is obtained by adding up all the integers in a data set and dividing the total by the total number of numbers. For example, in the data below

Here,

Spread it all out here first:

4, 5, 6, 7, 7, 8, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10

The mean is calculated by dividing total total by the total number of scores. Add up each number.

There are 16 numbers total, and they add up to 92. 92 / 16 = 5.75

To get the median, identify the middle number among all the other numbers.

Sadly, there is no "center number" given that there are 16.

Add the ninth and eighth numbers together, then divide by to find the middle.

To know more about mean visit:

https://brainly.com/question/30094057

#SPJ1

Answer:

gfifhdrtjttt9668ztjt*

The answer to 7 to the power of 2 is 49.

This is because when a number is raised to a power, it means that it is multiplied by itself that number of times. 7 to the power of 2 is 7 multiplied by itself 2 times, which is 7 x 7, which equals 49.

An expression known as "power" denotes the process of repeatedly multiplying a value or integer. An is often a power where n is the exponent and an is the base.

As an illustration, the power 63 demonstrates how three times the number 6 is multiplied.

To know more about power here

https://brainly.com/question/11244065

#SPJ4

The equation of the line, that passes through the points (- 6, 1) and (10, 0) is y = - (1/16)x + (5/8) and the equation of a line that is parallel to the above line and passes through point (-7, 2) is y = - (1/16)x + (25/16).

The general equation of a straight line is -

y = mx + c

{m} - slope.

{c} - intercept along the y - axis.

Given is that the line passes through the points (- 6, 1) and (10, 0).

The slope of the line will be -

{m} = (0 - 1)/(10 + 6) = -1/16

{m} = -1/16

We can write the equation as -

y = - (1/16)x + c

For the point (10, 0), we can write -

0 = - (1/16) x 10 + c

0 = - (10/16) + c

c = 10/16

c = 5/8

So, we can write the equation as -

y = - (1/16)x + (5/8)

The equation of a line that is parallel to the above line and passes through point (-7, 2) is as follows -

y = - (1/16)x + c

2 = - (1/16) x - 7 + c

c = 2 - 7/16

c = 25/16

y = - (1/16)x + (25/16)

Therefore, the equation of the line, that passes through the points (- 6, 1) and (10, 0) is y = - (1/16)x + (5/8) and the equation of a line that is parallel to the above line and passes through point (-7, 2) is y = - (1/16)x + (25/16).

To solve more questions on straight line, visit the link below -

https://brainly.com/question/28951560

#SPJ1

In the given graph the domain and range of function y=f(x) is

Domain: (-2,2]

Range : [-4, 5)

A function's domain is the set of all possible inputs to the function. This means it can be any number that can be entered into a function. For the majority of functions, this will be any number that can be substituted for the letter x. Except for a few exceptions such as square root functions and rational numbers, your domain will almost always be all real numbers.

The set of all possible outputs of a function is referred to as its range. This is usually represented by the letters y or f(x). The range is any number obtained by substituting any number for x.

Learn more about domain and range

https://brainly.com/question/28135761

#SPJ1

To represent "infinity" or the notion that an interval lacks an ending, we use the symbol.

The endpoints of infinity and negative infinity can be seen in two different ways. One the one hand, we can never get to infinity because it is a concept and not a real quantity.

In this sense, the interval is said to be open because it excludes the endpoints infinity and negative infinity. The infinity symbol is placed on the right side since there is no higher endpoint (all values must be larger than or equal to -3). An interval is closed if its boxed end is on -3. Because there is no endpoint on that side, infinity always has a curved end.

To represent "infinity" or the notion that an interval lacks an ending, we use the symbol. The symbol shouldn't be used with a square bracket because it's not a number. Visit this tutorial on set-builder and interval notation for a more thorough discussion of set notation and interval notation.

To learn more about infinity visit:

brainly.com/question/30107645

#SPJ1

The radius of the sphere  1.5  units

The volume of the cone is   pi (3)^2 *4 / 3   units^3  =  12pi  units^3

The volume of the sphere is (4/3)pi (1.5)^3  units^3 = 4.5 units^3

So   ratio  of the volume of the sphere to the cone is :

4.5 pi  / 12 pi  =    4.5 / 12  =      (9/2) / (24/2)  =  9 / 24  =  3 / 8

To learn more about diameter refer to:

https://brainly.com/question/23220731

#SPJ4

Helen is not correct. The pressure decreases by 23.8% and not less than 20%.

The initial pressure is 70 N / 0.2 m^2 = 350 Pa (Pascals). If the force is increased by 10 N and the area is increased by 10 cm^2, the new pressure is 80 N / 0.3 m^2 = 266.67 Pa

To calculate the percentage change in pressure, we divide the change in pressure by the initial pressure and multiply by 100:

So Helen is not correct. The pressure decreases by 23.8% and not less than 20%.

Learn more about Force here:

https://brainly.com/question/25239010

#SPJ4

A power of 3 equation is called as cubic equation.

The term equation in math is known as a mathematical statement with an 'equal to' symbol between two expressions that have equal values.

Here we need to find the term that has been used for power of 3 equation.

Here we have to know that the power of 3 equation is known as cubic equation.

in other terms the polynomial equation which has a degree of three is called a cubic polynomial equation or trinomial polynomial equation.

As we all know that the power of the variable is the maximum up to 3, therefore, we get three values for a variable, say x.

The general form of the power of 3 equation is written as

=> ax³ + bx² + cx + d = 0

To know more about equation here.

https://brainly.com/question/10413253

#SPJ4

0.30 is the probability that the individual purchased the product

A probability is a number that expresses the possibility or likelihood that a specific event will take place. Probabilities can be stated as proportions with a range of 0 to 1, or as percentages with a range of 0% to 100%.

The proportion between the total number of conceivable outcomes and the number of outcomes in a comprehensive collection of equally probable alternatives that result in a particular occurrence.

Example: When flipping a coin, there are only two possible outcomes: either it will land on its head or on its tail.

Let, B = individual purchased the product

S = individuals recalls seeing the advertisement.

Here, P(B) = 0.20

P(S) = 0.40

P(B ∩ S) = 0.12

Thus, P(B | S) = P(B ∩ S) / P(S)

= 0.12/0.40

= 0.30

P(B) = 0.20 < P(B | S) =0.30

Yes, thus the probability that an individual will purchase the product will increase if the individual sees the advertisement first.  

To know more about probability refer to:

brainly.com/question/24756209

#SPJ4

The complete question is as follows:

Answer:

  135.5 m

Step-by-step explanation:

Given a triangle with angles A=46°, B=103°, and side c=97 m, you want to find the length of side 'a'.

Given one side and two angles we can solve the triangle using the Law of Sines:

  a/sin(A) = b/sin(B) = c/sin(C)

In order to do that, we need to have a (side, angle) pair, so we need to find the measure of angle C.

  A + B + C = 180°

  46° +103° +C = 180° . . . use the given measures

  C = 31° . . . . . . . . . . . . . subtract 149°

Now, we can find 'a' from ...

  a/sin(A) = c/sin(C)

  a = c·sin(A)/sin(C) = (97 m)·sin(46°)/sin(31°) ≈ 135.477286 m

The distance from B to the tree at C is about 135.5 meters.

The amount of square inches of the cake that are covered with icing is 201.06, calculated by using the formula (π * radius2), with π equal to 3.14 and the radius equal to 8 inches.

1. Use the formula (π * radius2), with π equal to 3.14

2. The radius is half of the diameter, divide the diameter (16 inches) by 2

3. Radius = 16 inches / 2 = 8 inches

4. Calculate π * radius2: 3.14 * (8 inches)2 = 201.06 square inches

π * (8 inches)2

= 3.14 * (64 inches2)

= 201.06 square inches

Dominique is decorating a round cake with fruits and has frosted just the top of the cake. To determine the area of the cake that is covered with icing, we can use the formula (π * radius2). Since the cake is round, we can determine the radius of the cake by dividing the diameter of the cake (16 inches) by 2, resulting in the radius being 8 inches. We can then calculate the area of the cake covered with icing by multiplying π by the radius squared. Using the number 3.14 for π, the calculation is 3.14 * (8 inches)2, which equals 201.06 square inches. Therefore, 201.06 square inches of the cake are covered with icing.

Learn more about radius here

https://brainly.com/question/15047456

#SPJ4

To find the endpoint we have to calculate the distance between the known midpoint to the known endpoint. To calculate the midpoint we add two points and divide them by 2.

The formula for midpoint = (x1 + x2)/2, (y1 + y2)/2.

Substituting in the two x-coordinates and two y-coordinates from the endpoints.

Putting it together,

The endpoint formula is:

(x a ,ya)= ((2xm−xb),(2ym−yb))

( x a , y a ) = ( ( 2 x m − x b ) , ( 2 y m − y b ) ).

The end of a line at a point that is equally distant from both ends, a time interval between an event's beginning and end.

The point on a graph or figure where the figure stops might be referred to as the endpoint. It can be the point joining the sides of a polygon (the vertex), the common endpoint of two rays making an angle, the two extreme points of a line segment, the one end of a ray.

To learn more about endpoints and midpoints:

https://brainly.com/question/18315903

#SPJ4

Answer:if the siblings are less and the child are more u should remove  the percent from the difference and put it to the another one the one from  down there so the difference is 70% so try the same from down  there is 18 so it got to be 20

Answer:20

The factored quadratic functions with their equivalent standard form are given as follows:

1. e -> x² - 3x - 10 = (x - 5)(x + 2)

2. a -> x² + 7x - 10 = (x + 5)(x + 2).

3. c -> x² - 7x + 10 = (x - 5)(x - 2).

4. d -> x² - 2x - 63 = (x - 9)(x + 7)

5. f -> x² + 2x - 63 = (x + 9)(x - 7).

6. b -> x² + 16x + 63 = (x + 7)(x + 9).

A quadratic function is defined as follows:

y = ax² + bx + c.

A quadratic function can be factored as a function of it's roots x* and x**, as follows:

y = a(x - x*)(x - x**).

For item a, the function is given as follows:

y = x² + 7x + 10.

The coefficients are given as follows:

a = 1, b = 7, c = +10.

The discriminant is of:

D = 7² - 4(1)(10)

D = 49 - 40

D = 9.

Hence the first root is of:

x = (-7 - square root of 9)/2

x = -5.

The second root is of:

x = (-7 + square root of 9)/2

x = -2.

Meaning that the factored expression is given as follows:

y = (x + 5)(x - 2).

Matched with the second expression of column A.

The same procedure is followed for the remaining quadratic functions.

More can be learned about quadratic functions at https://brainly.com/question/26865936

#SPJ1

Answer:

-8g+16-12t is the answer

Step-by-step explanation:

multiply everything by 4

Answer:

150-c

Step-by-step explanation:

150= total

c= children

adults=x

x=150-c

Answer:

I hope this helps you...

please mark me as brainliest..

According to the solving the team average is g/17 and Chris sold (g/8) - 17  games.

The term "Average" refers to a value that should be used to describe the sample as a whole. The average is determined by dividing the total number of values in a set by the total number of values. also known as the arithmetic mean.

Average A collection of integers are added, their count is divided, and the sum is used to determine the arithmetic mean.

average game sold = g/8

since Chris sold 17 games less than average

hence, Chris sold   games

To know more about average visit:-

brainly.com/question/2906096

#SPJ1

The flowchart to find the biggest of 3 numbers is mentioned below:

A flowchart is a type of diagram that represents an algorithm, process, or workflow. It is a visual representation of the steps and decisions involved in a problem-solving or decision-making process. Flowcharts use a variety of symbols and shapes to represent different types of steps and decisions, such as inputs, outputs, process steps, and decision points. They are used to communicate the logic of a program or process to different stakeholders, such as developers, managers, and users.

An algorithm is a set of instructions or a step-by-step procedure for solving a problem or completing a task. It is a well-defined sequence of operations or actions that are taken in order to achieve a specific goal or outcome. Algorithms can be expressed using natural language, pseudocode, or programming languages. The steps in an algorithm must be unambiguous and have a clear stopping point.

To learn more about flowchart visit:

https://brainly.com/question/14598590

#SPJ1

Magda said the typical measure of orange juice in a full family-size jug is 1 gal in value.

A finite collection of symbols that are properly created in line with context-dependent criteria is referred to as an expression, sometimes known as a mathematical expression. Operations include addition, subtraction, multiplication, and division.

The collection of mathematical symbols that emerges from the right arrangement of numbers is known as a mathematical expression and variables using operations like addition, subtraction, multiplication, division, exponentiation, and other as-yet-unlearned operations and functions.

The three different types of algebraic expressions are monomial, binomial, and polynomial.

The complete question is : In a math question, Magda correctly answered a question that asked for a typical measure of orange juice in a full family-size jug. Which was her answer?

a. 2 cups

b. 1 gal

c. 10 gal

d. 10 fl oz

To learn more about mathematical expression refer to :

brainly.com/question/1852123

#SPJ4

Using percentages we know that the value of a car decreases by 34% on average.

A % is a quantity or ratio that, in mathematics, represents a portion of one hundred.

A dimensionless relationship between two numbers can be represented in a variety of ways, such as through ratios, fractions, and decimals.

The symbol "%" is frequently written after the number to indicate percentages.

So, we know that:
Annie brought a car at: $32000

Current price of the car: $21000

The decline in car percentage:

21000/32000 * 100

65.625%

⇒ 100 - 65.625 = 34.375%

Rounding off: 34%

Therefore, using percentages we know that the value of a car decreases by 34% on average.

Know more about the percentages here:

https://brainly.com/question/9553743

#SPJ4

Complete question:
Annie bought a brand-new car for $32,000. The car is now worth $21,000.

By what percentage does the car's worth decrease?

The time duration for the population to exceed 10,000 is approximately 6.6 hours

What is time ?

In mathematics, time is described as a continuing and continuous series of events that take place in chronological order from the past through the present and into the future. The duration of events, the gaps between them, or even the sequencing of occurrences can all be quantified, measured, or compared using time.

the time frame that an activity, process, or state lasts or continues to exist: duration is a non-spatial continuum that is measured in terms of subsequent occurrences from the past, present, and future.

The mathematical symbol used to represent the multiplication process and its subsequent product is the multiplication sign, sometimes referred to as the times sign or the dimension sign.

t = The time duration in hours

The initial population of the cells = 1,000

Therefore, at t = 0, P(0) = 1,000 = P₀ × 1.42^0

∴  P(0) = 1,000 = P₀ × 1 = P₀

P₀ = 1,000

When the population is 10,000, we have;

P(t) = 10,000 = 1,000 × 1.42^t

∴ 1.42^t = 10,000/1,000 = 10

㏒(1.42^t) = ㏒(10) = 1

∴ t × ㏒(1.42) = 1

t = 1/㏒(1.42) = 6.56649071898

∴ The time duration for the population to exceed 10,000, t ≈ 6.6 hours.

To learn more about time from the given link  

https://brainly.com/question/22545229

#SPJ4

Answer:

Step-by-step explanation:

So first, with the given table you need to "plug-in" the numbers that are there for x and y.

Ok, for example 2 is listed in the "x" row. So plug it 2 for "x":

3x+y=15

3(2)+y=15

6+y=15

-6      -6

y=9

So do this for all of them...the same goes with all of the values...just plug in one, complete the steps then you'll get the answer for the other variable.

Hope this helps!

Answer:

There would be 312 acres of old tree growth for 0.4% of the forest. There would be 31.2 acres of old tree growth for 0.04%. I wasn't sure if you meant 0.4 or 0.04.