Use the electron arrangement interactive to complete the table

Answers

Answer 1

The number of electrons that is needed to fill the following sublevels are:

1s = 2 electrons. 2s = 2 electrons. 2p = 6 electrons. 3s = 2 electrons.

What is the number of electrons needed to complete the table?

The formula to find this out is:

= 2 x (2 x Level +1)

1s = 0 levels

Number of electrons:

= 2 x (2 x 0 + 1)

= 2 electrons

2s = 0 levels

= 2 x (2 x 0 + 1)

= 2 electrons

2p = 1 level

= 2 x (2 x 1 + 1)

= 6 electrons

3s = 0 levels

= 2 x (2 x 0 + 1)

= 2 electrons

Find out more on electron arrangement at https://brainly.com/question/11316046.

Use The Electron Arrangement Interactive To Complete The Table
Answer 2

The completed table using the electron arrangement interactive is attached below. In this table for sublevel 1s, 2s, 2p and 3s electron needed is 2,2,6 and 2 respectively.

What is electron arrangement?

The electron arrangement is the way or process to arrange the electrons in an atom. The number of electron  needed per sublevel are expressed in following points.

The number of electron need to feel sublevel 1s is 2.The number of electron need to feel sublevel 2s is 2.The number of electron need to feel sublevel 2p is 6.The number of electron need to feel sublevel 3s is 2.

The image of the table which fill the sublevel is attached below. In this table all the electron is fulfilled with needed electrons.

Thus, the completed table using the electron arrangement interactive is attached below. In this table for sublevel 1s, 2s, 2p and 3s electron needed is 2,2,6 and 2 respectively.

Learn more about the electron arrangement here;

https://brainly.com/question/27184897

#SPJ4

Use The Electron Arrangement Interactive To Complete The Table
Use The Electron Arrangement Interactive To Complete The Table

Related Questions

A piston in an automobile engine is in simple harmonic motion. Its amplitude of oscillation from the equilibrium (centered) position is ±6.83 cm and its mass is 2.708 kg.
Find the maximum velocity of the piston when the auto engine is running at the rate of 3590 rev/min.
Answer in units of m/s.

Answers

The maximum velocity of the piston when the auto engine is running at the given speed is 25.68 m/s.

Angular speed of the automobile

The angular speed of the automobile in radian per second is calculated as follows;

ω = 2πN

ω = 2π x (3590 /60 s)

ω = 375.94 rad/s

Maximum velocity

The maximum velocity of the piston is calculated using the following formula;

v(max) = Aω

v(max) = 0.0683 x 375.94

v(max) = 25.68 m/s

Thus, the maximum velocity of the piston when the auto engine is running at the given speed is 25.68 m/s.

Learn more about angular speed here: https://brainly.com/question/6860269

A car is traveling in a race. The car went from the initial velocity of 35 m/s to the final velocity of 65 m/s in 5 seconds
What is the acceleration?
- 13 m/s
om/
6 m/s
13 m/s

Answers

Answer:

6m/s

Explanation:

a = (v-u)/t

acceleration, a

initial velocity, u

final velocity, v

time, t

substitute values and you'll get the answer

Answer:

6 m/s

Explanation:

Please help, question is the picture.

Answers

Answer:

Mirror angle:

25°

50°

Angle of incidence (θi):

25°

50°

Angle of reflection (θr)

25°

50°

Explanation:

The mirror angle is the same as the angles of incidence and reflection.

Brainlist Pls!

HELP MEEEE, question number 5

Answers

Explanation:

The gravitational potential energy of an object is given by GPE=mgh

where m is the mass of the object, g is the gravitational field strength (9.81 m/s² on earth) and h the height it is lifted at above the GPE reference ground.

Mass 1 has a GPE=m¹gh=(2)(9.81)(10)=196.2 Joule

Mass 2 has a GPE=m²gh=(4)(9.81)(10)=392.4 Joule

Object 2 has more potential energy and it makes sense since it's heavier

Hope this helps :))

7. Why are cooking pans made of aluminum? {Explain using the specific heat value of
aluminum} it conducts heat well high thermal energy

Answers

Cooking utensils, such as pots, pans and menu trays, are often made from aluminium because it is lightweight and conducts heat well, making it energy-efficient for heating and cooling. These properties also make it a preferred material for packaging.

The main environmental effects of ozone depletion could include all of the following except

Answers

The main environmental effects of ozone depletion could include the following:

higher risk of skin cancersunburnsquick ageingweakend immune system

What is ozone depletion?

Ozone depletion is the gradual thinning of the ozone layer in the upper atmosphere as a result of the relelase of chemical compounds or gases.

Ozone layer helps prevent the Earth surface against incoming ultraviolet radiations that could cause damage to our environment.

Therefore, the main environmental effects of ozone depletion could include the following:

higher risk of skin cancersunburnsquick ageingweakend immune system

Learn more about ozone depletion at: https://brainly.com/question/1238233

The following are some of the primary environmental implications of ozone depletion and increased risk of skin cancer, sunburns, rapid aging, and the immune system being weakened.

What is ozone depletion, and how does it happen?

The progressive weakening of the ozone layer in the upper atmosphere as a result of the release of chemical compounds or gases is known as ozone depletion.

The ozone layer protects the Earth's surface from harmful UV rays that may harm our environment. As a result, the primary environmental effects of ozone depletion could include:

1. An increased risk of skin cancer

2. Sunburns

3. Rapid aging

4. The immune system is weakened.

Hence increased risk of skin cancer is the main environmental effect of ozone depletion.

To learn more about the ozone depletion refer to the link;

https://brainly.com/question/11318086

#SPJ4

The reflection of a 10. 0 cm object appears to be 18 cm tall and 9 cm behind the mirror. What distance is the object from the mirror? cm.

Answers

The distance is the object from the mirror will be 5cm.

What is a mirror equation?

A mirror equation is an equation that relates object distance and image distance to focal length. It is often referred to as a mirror formula.

The object distance in a spherical mirror is the distance between the object and the pole of the mirror (u).

The given data in the problem is;

Image height = 18cm

Object height = 10cm

u is the object distance

v is the image distance = 9 cm

From the symmetry of the triangle;

[tex]\frac{image \ height }{object \ height} = \frac{v}{u} \\\\ \frac{18 }{10} = \frac{9}{u}\\\\ \rm u=\frac{90}{8} \\\\ u = 5\ cm[/tex],

Hence the distance is the object from the mirror will be 5cm.

To learn more about the mirror equation refer to the link;

https://brainly.com/question/3229491

A car’s tire rotates 5.25 times in 3 seconds. What is the tangential velocity of the tire?

Answers

The tangential velocity of the car's tire is the product of the angular velocity and radius of the car's tire which is 11(r) m/s.

Angular velocity of the tire

The angular velocity of the tire is the rate of change of angular displacement of the tire with time.

The magnitude of the angular velocity of the tire is calculated as follows;

ω = 2πN

where;

N is the number of revolutions per second

ω = 2π x (5.25 / 3)

ω =  11 rad/s

Tangential velocity of the tire

The tangential velocity of the car's tire is the product of the angular velocity and radius of the car's tire.

The magnitude of the tangential velocity is caculated as follows;

v = ωr

where;

r is the radius of the car's tire

v = 11r m/s

Learn more about tangential velocity here: https://brainly.com/question/25780931

Identify the aspects of the pictured graph that are missing or contain errors.

Answers

Answer:

ooops ignore this it wont let me leave this screen it does this weirdly s

Explanation:

A magnifier allows one to look at a very near object by forming an image of it farther away. The object appears larger. To create a magnifier, one would use a.

Answers

In order to create a magnifier in convex lens, you should choose a short focal length that is lesser than 1 meter.

What is a convex lens?

A convex lens is also referred to as converging lens and it can be defined as a type of lens that typically causes parallel rays of light with respect to its principal axis to come to a focus (converge) and form a real image.

In Science, a magnifier refer to an optical instrument that allow us to look at a very near object because its image is generally formed farther away. Thus, the image of the object appears to be much larger.

In this context, you should choose a short focal length that is lesser than 1 meter when you want to create a magnifier in convex lens because the nearer the object is to the lens, the larger would be the image formed.

Read more on convex lens here: https://brainly.com/question/10153605

What do tripped circuit breakers and blown fuses indicate.

Answers

Answer:

When a circuit breaker regularly trips or a fuse repeatedly blows, it is a sign that you are making excessive demands on the circuit and need to move some appliances and devices to other circuits. Or, it may indicate that your house has too few circuits and is in need of a service upgrade.

1. What is one way that light waves differ from sound waves?

A. Light waves all have the same frequency..

B. Light waves travel by oscillation.

C. Light waves do not require a medium to propagate.

D. Light waves transfer energy.

2. Which best explains why high frequency electromagnetic waves are more likely to cause harm to living things?(1 point)

A. As a wave's frequency increases, more energy is carried by the wave in a given time period.

B. As a wave's frequency increases, less energy is carried by the wave in a given time period.

C. As a wave's frequency increases, a constant energy is carried by the wave in a given time period.

D. As a wave's frequency increases, the energy carried by the wave in a given time period is equal to zero.

3. How do the frequencies and the speeds of yellow light and blue light compare?

Answers

One way Light waves differ from sound waves it that it does not require a medium to propagate.

High frequency electromagnetic waves are more likely to cause harm because as a wave's frequency increases, more energy is carried by the wave in a given time period.

The frequency of yellow light is greater than that of blue light.

What is a Wave?

This is defined as a propagation of disturbances from place to place in a regular and organized way.

The answers provided above are therefore the most appropriate choices in this scenario.

Read more about Waves here https://brainly.com/question/15663649

Answer: Light waves do not require a medium to propagate and As a wave's frequency increases, more energy is carried by the wave in a given time period.

Explanation:

A sound wave passes from air into water and then into steel. With each change in medium, what happens to the speed of the wave?.

Answers

Answer:

Explanation:

You need to consider the index of refraction.

index of refraction of air: 1.00

index of refraction of water: 1.33

Index of refraction of steel: 2.75681

If the sound wave passed from air into water, it passes from a lower index to a higher index of refraction.

As the wave travels into the more dense medium (higher n), it slows down. Therefore from air to water (lower to higher) it slows down, and from water to steel (n of steel is higher that n of water) therefore it slows down even more.

Which best describes an action related to interdependence?
A. limiting the amount of fish harvested to ensure future availability
B. finding methods for extracting oil with minimal damage to the environment
C. using calculations to ensure that lumber is used efficiently
D. predicting the profits from selling metal that is extracted from ore

Answers

[tex]\small\color{blue}{⊱─━━━━━━━━━⊱༻●༺⊰━━━━━━━━━─⊰}[/tex]

Which best describes an action related to interdependence?

A. limiting the amount of fish harvested to ensure future availability

B. finding methods for extracting oil with minimal damage to the environment

C. using calculations to ensure that lumber is used efficiently

D. predicting the profits from selling metal that is extracted from ore

[tex]\small\color{blue}{⊱─━━━━━━━━━⊱༻●༺⊰━━━━━━━━━─⊰}[/tex]

The living things in an ecosystem are interdependent. This means that living things depend on their interactions with each other and also nonliving things for survival. For example, a tree depends on sunlight for energy and food.

[tex]\small\color{blue}{⊱─━━━━━━━━━⊱༻●༺⊰━━━━━━━━━─⊰}[/tex]

-PoliteCat

#CarryOnLearning

[tex]\large\boxed{\text{Learn With Brainly!!}}[/tex]

ᴄʟɪᴄᴋ ᴛʜɪs ↓

a
13. Chemical energy is a form of___________
energy.

Answers

Answer:

Potential energy.

Explanation:

Batteries are a form of chemical energy which  is stored in the bonds of molecules contained within the battery acid, batteries are a form of potential energy making chemical potential energy too.

A 23. 6 g ball of clay is thrown horizontally to the right at 40. 4 m/s toward a 1. 70 kg block sitting at rest on a frictionless surface. The clay hits and sticks to the block.


What is the speed of the block and clay right after the collision?


Answer in m/s to three significant figures

Answers

Answer:

0.142 m/s

Explanation:

You solve it by conservation of momentum.

Before the impact the total momentum is, considering right the positive direction,

[tex]m_1v_1+m_2v_2 =6\cdot10^-^3\times 40.4\ kg\cdot m/s + 1.7\times 0 \ kg\cdot m/s =242.4\cdot 10^-^3\ kg\cdot m/s[/tex]

After the impact, we have a single body of mass [tex]m_1+m_2[/tex] and thus a single value of speed, V.

[tex](m_1+m_2)V =1.703 kg \cdot V[/tex]

Since no external forces are applied, the two quantities are equal after the impact. That allows us to solve for V

[tex]V= (242.4\cdot10^-^3 \ kg\cdot m/s )\div (1.703\ kg)=142.337\cdot10^-^3 m/s = 0.142 m/s[/tex]

In your own words describe the physiological significance of the fev1/fvc ratio

Answers

Answer:

if you doctor suspect that you have COPD , they will calculate your fev1/fvc ratio . this represent the percentage of your lung capacity that you can explain in one second. the higher your percentage , the larger your lung capacity and the healthier your lungs

The ratio  [tex]\frac{FEV1}{FVC}[/tex]  indicates the diameter of an airway. The greater the value, the more quickly air can pass through the airway.

What is lung volume?

The volume of air in the lungs at different stages of the respiratory cycle is referred to as lung volumes and lung capacities. An adult human male's entire lung capacity is around 6 liters of air.

The ratio  [tex]\frac{FEV1}{FVC}[/tex]  indicates the diameter of an airway. The greater the value, the more quickly air can pass through the airway. As a result, the lower the resistance, the broader the airway becomes.

Hence the lower the resistance, the broader the airway becomes.

To learn more about the lung volume refer to the link;

https://brainly.com/question/15704673

#SPJ4

12. Tom has two pendulums with him. Pendulum 1 has a ball of mass 0.1 kg attached to it and has a length of 5 m. Pendulum 2 has a ball of mass 0.5 kg attached to a string of length 1 m. How does mass of the ball affect the frequency of the pendulum? Which pendulum will have a higher frequency and why?

Show all of your work.

Answers

According to Hooke 's law

[tex]\\ \rm\rightarrowtail \nu=k\sqrt{\dfrac{\ell}{m}}[/tex]

[tex]\\ \rm\rightarrowtail \nu\propto \dfrac{1}{\sqrt{m}}[/tex]

Hence lower the mass higher the frequency

First ball will have a higher frequency

A 100-cm long dipole is excited by a sinusoidally varying current with an amplitude i0=2 a. Determine the time average power radiated by the dipole if the oscillating frequency is 150 mhz

Answers

For A 100-cm long dipole is excited by a sinusoidally varying current with an amplitude i0=2 , the time average power radiated  is mathematically given as

P=0.1577w

What is the time average power radiated by the dipole if the oscillating frequency is 150 mhz?

Generally, the equation for the   is mathematically given as

[tex]\lambda =\frac{c}{f}[/tex]

Therefore

[tex]\lambda=\frac{3\times 10^{8}}{10^{6}}[/tex]

lambda=300m

In conclusion, for the power

[tex]P=40\pi^{2}(I_{0})^{2}(\frac{l}{\lambda})^{2}\\\\P=40* (3.14)^{2}\times6^{2} (\frac{1}{300})^{2}[/tex]

P=0.1577w

Read more about Power

https://brainly.com/question/10203153

The time-averaged power radiated by the dipole if the oscillating frequency is 150 MHz is 0.1577 w.

What is wavelength?

The distance between identical points (adjacent crests) in adjacent cycles of a waveform signal carried in space or down a wire is defined as the wavelength.

Given that the current is 2 amp, while the frequency is 150 MHz. Therefore, the wavelength can be written as,

[tex]\lambda = \dfrac cf = \dfrac{3 \times 10^8}{10^6} = 300\rm\ m[/tex]

Now, the power can be written as,

[tex]P=40 \pi^2 \times (I_o)^2 \times (\dfrac{l}{\lambda})^2\\\\P = 40 \times \pi ^2 \times 6^2 \times (\dfrac{1}{300})^2\\\\P = 0.1577\rm\ w[/tex]

Hence,  the time-average power radiated by the dipole if the oscillating frequency is 150 MHz is 0.1577 w.

Learn more about Wavelength:

https://brainly.com/question/13533093

#SPJ4

Which of these circuits has a voltmeter?
O
(A)
(B)
(C)
(D)
(E)
ОА А
OBB
Ос. с
ODD
О Е Е

Answers

Answer:

I think is o or mavey it could be D

What units are appropriate to express specific heat?.

Answers

Answer:

The units for specific heat can either be joules per gram per degree (J/goC) or calories per gram per degree

Explanation:

In what type of system is mechanical energy lost to its surroundings?

A. internal

B. external

C. closed

D. open

Answers

Answer:

open

Explanation:

in open system mechanical energy is lost to its surroundings

Thermal energy is transferred between objects when they have?
A. the same mass
B. different temperatures
C. the same kinetic energy

Answers

The answer is B I had to answer this question one time

Answer:

B. different temperatures

Explanation:

Thats how they transfer energy because if one object is hotter then the other, the heat can still be transfer to the other object and make their temperatures the same

Which level instruments operate on the principle of generating a signal and then measuring the time required for the signal to reflect off the process fluid back to the transmitter

Answers

A is the correct answer I believe

One of the most crucial devices for electronics and communication is the signal generator. For several reasons, including testing, debugging, and designing, it is utilized to produce various types of signals and frequencies.

What instruments operate principle of generating a signal?

Engineers create electronic signals using signal generators, which can be analogue or digital, to test circuit designs. Signal generators come in a wide variety of forms with various characteristics and uses. The most typical signal generator kinds and their distinctive qualities are listed below.

Therefore, radar level instruments operate on the principle of generating a signal and then measuring the time required for the signal to reflect off the process fluid back to the transmitter.

Learn more about instruments here:

https://brainly.com/question/29608809

#SPJ2

If you have 10 ounces of meat, what percentage of the calories comes from fat if the meat is 90% lean?

Answers

Answer:

There are 602 calories in 10 ounces of Ground Beef (85% Lean / 15% Fat).  serving sizes of Ground Beef

Explanation:

hope this helps if not please let me now

The wavelengths of visible light vary from about 300 nm to 700 nm. what is the range of frequencies of visible light in a vacuum?

a) 90 hz to 210 hz
b) 9*10^10 hz to 2.1*10 hz
c) 4.28*10^5 hz to 1*10^6 hz
d) 4.29*10^14 hz to 1*10^15 hz

Answers

The range of frequencies of visible light in a vacuum with wavelength between 300 nm to 700 nm is determined as 4.29 x 10¹⁴ Hz to 1 x 10¹⁵ Hz.

Frequency of the visible light

The frequency of the visible light is determined  by using the following formulas relating speed of light and frequency of light.

c = fλ

where;

c is speed of lightf is frequency of lightλ is the wavelength

Frequency of light at 300 nm wavelength

f = c/λ

f = (3 x 10⁸) / (300 x 10⁻⁹)

f = 1 x 10¹⁵ Hz

Frequency of light at 700 nm wavelength

f = c/λ

f = (3 x 10⁸) / (700 x 10⁻⁹)

f = 4.29 x 10¹⁴ Hz

Thus, the range of frequencies of visible light in a vacuum with wavelength between 300 nm to 700 nm is determined as 4.29 x 10¹⁴ Hz to 1 x 10¹⁵ Hz.

Learn more about frequency of visible light here: https://brainly.com/question/10728818

What is the new period if the pendulum is taken to a planet that has 4 times the mass and 4 times the radius of earth

Answers

The new period of the pendulum when it is taken to the new planet is  double of its period on Earth.

Period of a pendulum

The period of a pendulum is given by the following formula;

[tex]T = 2\pi \sqrt{\frac{l}{g} }[/tex]

where;

g is acceleration due to gravity of the pendulumL is length of the pendulumAcceleration due to gravity of the new planet

The acceleration due to gravity of the new planet is calculated as follows;

[tex]g_E = \frac{GM_E}{R_E^2} = 9.81 \ m/s^2 \\\\g(new \ planet) = \frac{G(4M_E)}{(4R_E)^2} = \frac{4GM_E}{16R_E^2} = \frac{GM_E}{4R_E^2} = \frac{9.81}{4} = 2.45 \ m/s^2[/tex]

New period of the pendulum

[tex]T = 2\pi \sqrt{\frac{l}{g} } \\\\T =\frac{2\pi \sqrt{l} }{\sqrt{g} } \\\\T_1\sqrt{g_1} = T_2\sqrt{g_2} \\\\T_E\sqrt{g_E} = T\sqrt{g} \\\\T = \frac{T_E\sqrt{g_E}}{\sqrt{g} } \\\\T = \frac{T_E \times \sqrt{9.81} }{\sqrt{2.45} } \\\\T = 2T_E[/tex]

Thus, the new period of the pendulum when it is taken to the new planet is double of its period on Earth.

Learn more about period of pendulum here: https://brainly.com/question/26449711

you have to choose more than one on this

Answers

b/c bc it’s just b and c

Consider a system consisting of three particles: m1 = 4 kg, vector v1 = < 10, -5, 15 > m/s, m2 = 9 kg, vector v2 = < -15, 5, -3 > m/s, m3 = 3 kg, vector v3 = < -24, 36, 18 > m/s.
a) what is the total momentum of this system?
b) what is the velocity of the center of mass of this system?
c) what is the total kinetic energy of this system?
d) what is the translational kinetic energy of this system?
e) what is the kinetic energy of this system relative to the center of mass?
one way to calculate krel is to calculate the velocity of each particle relative to the center of mass, by subtracting the center-of-mass velocity from the particle's actual velocity to get the particle's velocity relative to the center of mass, then calculating the corresponding kinetic energy, then adding up the three relative kinetic energies. however, there is a much simpler way to determine the specified quantity, without having to do all those calculations; think about what you know about the relationships among the various kinds of kinetic energy in a multiparticle system.

Answers

The answers to your questions are as listed below

A) The total momentum of the system is :  < - 167, 133, 87 >   kg m/s

B) Velocity of the center of mass of this system : < - 10.44 , 8.31, 5.44 > m/s

C) Total kinetic energy of the system : 5159.5 J  

D) Translational kinetic energy of the system :  1660.84 J

E) kinetic energy relative to the center of mass : 3498.66 J

Given data :

m₁ = 4 kg ,   V₁ = < 10, -5, 15 > m/s

m₂ = 9 kg,   V₂ = < -15, 5, -3 > m/s

m₃ = 3 kg    V₃ = < -24, 36, 18 > m/s.

A) Determine the total momentum of the system

Total momentum = Σ mv

= < 4*10 + 9*(-15) + 3*(-24), 4*(-5) + 9*5 + 3*36, 4*15 + 9 (-3) + 3*18 >

= < - 167, 133, 87 >   kg m/s

B) Velocity at the center of mass of this system

Velocity = < - 167 / 16 , 133/ 16, 87/ 16 >

              =  < - 10.44 , 8.31, 5.44 > m/s

C) Determine the total kinetic energy of the system

Total Kinetic energy = 1/2 m₁v₁² + 1/2 m₂v₂²  + 1/2 m₃v₃²  --- ( 1 )

where : v² = v₁² + v₂² + v₃²

therefore

Total kinetic energy = 700 + 1165.5 + 3294

                                  = 5159.5 J  

D) Determine the translational kinetic energy of the system

Translational kinetic energy ( Kcm ) = 1/2 ( m₁ + m₂ + m₃ ) * Velocity²

                                                           = 1/2 ( 16 ) * (  - 10.44² + 8.31² + 5.44² )

Hence translational kinetic energy = 1660.84 J

E) The Kinetic energy of the system relative to the center of mass

Krel = Ktotal - Kcm

       = 5159.5 - 1660.84

       = 3498.66 J

Hence we can conclude that the answers to your questions are as listed above.

Learn more about Translational kinetic energy :https://brainly.com/question/25959744

At what constant velocity must a spacecraft travel from earth if it is to reach the star in 3. 7 years, as measured by travelers on the spacecraft?

Answers

The constant velocity that the spacecraft must travel is : 3.49 * 10⁸ m/s

Given data :

Distance of star from earth = 4.3 light years

Observers time = 3.7 years

Determine the constant velocity the spacecraft must travel

Observers time = 3.7 * 365 * 24 * 60 * 60

Distance of star from earth = 4.3 * 9.46 * 10¹⁵

The velocity the spacecraft must travel will be calculated using the equation

V = distance / time

   = ( 4.3 * 9.46 * 10¹⁵ ) / ( 3.7 * 365 * 24 * 60 * 60 )

   = 3.49 * 10⁸ m/s

Hence we can conclude that The constant velocity that the spacecraft must travel is : 3.49 * 10⁸ m/s

Learn more about space travelling : https://brainly.com/question/1344685

Attached below is the missing detail related to the question

The constant velocity must the spacecraft travels from the earth will be 3.49×10⁸ m/sec.

What is velocity?

The change of distance with respect to time is defined as speed. Speed is a scalar quantity. It is a time-based component. Its unit is m/sec.

The given data in the problem is

Distance of earth from stars = 4.3 light year

The given time = 3.7 year

One year converted into the second as;

[tex]\rm 1 \ year = 3.7 \times 365 \ days \ \times 24 \ hour \times 60 \ minute \times 60 \ sec \\\\ 1 year = 116 \times 10^6 \ sec[/tex]

1 light-year into a kilometer as;

[tex]\rm 4.3 \ light year = 4.3 \times 9.46 \times 10^{15 metre} \\\\[/tex]

At what constant velocity must a spacecraft travel from the earth if it is to reach the star in 3. 7 years,

The velocity of the spacecraft's travel from the earth will be;

[tex]\rm V = \frac{d}{t} \\\\ V= \frac{4.3 \times 9.46 \times 10^{15}}{3.7 \times 365 \times 24 \times 60 \times 60 } \\\\\ V= 3.49 \times 10^8 \ m/sec[/tex]

Hence the constant velocity must the spacecraft travels from the earth will be  3.49×10⁸ m/sec.

To learn more about the velocity refer to the link;

https://brainly.com/question/862972

#SPJ4

Other Questions
is this a good poem the topic was hope Help help help help help Identify C on the following diagram Describe the course of the war in North America . "Why is it so important to have - yield test- information available"? Concussions:A. Only occur if there is a hit to the head.B. Often cause a person to pass out or lose consciousness.C, Are noticeable right away after a hit to the head.D. Happen most often in sports as a result of a collision between athletes. Please help I will give brainliest. Sketch a graph x - y =5 Which equation represents the sentence, "The sum of three times p and twenty-five is q"? A. (3 + 25) = q B. 3(p + 25) = q C. 3p 25 = q D. (3p + 25) = q The speed of 10 cars on a certain highway stretch was recorded below. If the mean of the data is 63.2 with a standard deviation of 6.2, circle all data values with a z-score less than 0.5.{49, 58, 60, 63, 64, 64, 65, 67, 70, 72} 50 POINTS NEED HELPIf u = 3 inches, v = 4 inches, w = 7 inches, x = 7 inches, y = 8 inches, and z = 4 inches, what is the area of the object? A. 52 square inches B. 53 square inches C. 56 square inches D. 54 square inches Choose the best Spanish translation.Do you need some papers? PLEASE HELPP 50 POINTS AND ILL DO BRAINLIEST In the previous lesson, you learned about Medieval art. Please see the artifact below and answer the following questions.What can we tell about the owner of this artifact? Why would an early medieval warlord want to own and probably display this thing?What can we tell about the style? What is communicated through this particular choice of style? 121.45 - 80.28 = ___A. 39.97B. 42.27C. 41.13D. 41.17 Multiple choicechoose the sentence that is punctuated correctly.1.(1 point)o an ailurophile loves cats, an ailurophobe dislikes cats.o an ailurophile loves cats; an ailurophobe dislikes cats. Suppose that monetary neutrality and the fisher effect both hold. An increase in the money supply growth rate increases. Two of which shape can make a circle PLSS ANSWER ME explain how Hannah's approach to solving mysteries reveals her character traits? PLEASE ANSWER THIS CORRECTLY!! IF YOU DO, I'LL MARK YOU AS BRAINLIEST PLSS AND TYY :DWhat factors made the Klu Klux Klan violence possible and acceptable to so many Americans as a reaction to Reconstruction and interracial democracy? Use evidence from at least one source to support your claims. What is the value of the expression (6 + 3)215184581