The gauge pressure of the water where it enters the hose is ΔP = 145 Pa with a temperature of the water is 20 °C.
From the given,
water flows (Q) = 0.20 L/s = 2×10⁻⁴ m³/s.
Length of the garden (L) = 7 m
Diameter (d) = 2.5 cm
Temperature of water = 20°C
gauge pressure =?
By using the formula, Q = πR⁴ ×ΔP/ 8ηL, where η is the viscosity of the fluids and R is the radius, and ΔP is a difference in pressure or Gauge pressure.
viscosity (η) at 20°C is 1.0×10⁻³ Pa.s.
ΔP = Q (8ηL/πR⁴)
Q = 0.20 × 1/1000 = 2 × 10⁻⁴ m³/s
ΔP = (2 × 10⁻⁴×8×1×10⁻³×7) / (π×(2.5×10⁻²/2)⁴)
= 112×10⁻⁷ / 7.69×10⁻⁸
= 14.5 × 10¹
= 145 Pa.
Thus, the difference in pressure or gauge pressure is 145 Pa.
To learn more about gauge pressure:
https://brainly.com/question/30753016
#SPJ1
Hebb's rule are based on associative laws of ____ and ____.
a. _____ contiguity; cause and effect
b. _____ cause and effect; frequency
c. __X___ frequency; contiguity
d. _____ cause; effect
Hebb's rule is based on the associative laws of frequency and contiguity.
Hebb's rule is the based on the frequency and contiguity associative principles. This means that the stronger the link between two neurons gets the more frequently they are triggered together and the closer in time their activations occur.
This is because, according to Hebb's rule, "cells that fire together wire together," which means that synapses connecting neurons that are the active at the same moment become stronger over time.
This process is the assumed to be at the root of many types of learning and memory in the brain.
For such more question on frequency:
https://brainly.com/question/254161
#SPJ11
Two wires are tied to the 1.5 kg sphere shown in the figure. (Figure 1) The sphere revolves in a horizontal circle at constant speed. For what speed is the tension the same in both wires? Express your answer to two significant figures and include the appropriate units. What is the tension? Express your answer to two significant figures and include the appropriate units.
The speed at which the tension in both wires is the same is approximately 7.8 m/s, and the tension in both wires at this speed is approximately 84 N.
To find the speed at which the tension in both wires is the same, we can use the equation T = mv^2/r, where T is the tension, m is the mass of the sphere, v is the speed, and r is the radius of the circle.
Since the sphere is in equilibrium, the tension in both wires must be equal. Therefore, we can set the two equations for tension equal to each other and solve for v:
T = mv^2/r (for wire 1)
T = mv^2/r (for wire 2)
mv^2/r = mv^2/r
v = √(Tr/m)
Plugging in the given values, we get:
v = √(T(1.5 kg)/(0.2 m))
v = √(7.5T) m/s
To find the tension, we can use either equation for tension and plug in the values:
T = mv^2/r
T = (1.5 kg)(v^2)/(0.2 m)
T = 11.25v^2 N
Substituting the expression we found for v, we get:
T = 11.25(7.5T) N
T = 84.375 N
Learn more about speed here:-
https://brainly.com/question/17661499
#SPJ11
a spinning top completes 6.00×103 rotations before it starts to topple over. the average angular speed of the rotations is 8.00×102 rpm. calculate how long the top spins before it begins to topple.
The top spins for 7.50 seconds before it begins to topple.
To solve this problem, we can use the formula:
number of rotations = (angular speed / 60) * time
where angular speed is given in rpm (revolutions per minute), and time is given in seconds. We can rearrange this formula to solve for time:
time = (number of rotations * 60) / angular speed
Plugging in the given values, we get:
time = (6.00×10^3 * 60) / 8.00×10^2 = 45 seconds
However, this is the total time the top spins before it topples over. To find how long it spins before toppling, we need to subtract the time it takes to complete 6,000 rotations:
time = 45 - (6.00×10^3 / 8.00×10^2) = 45 - 7.50 = 37.50 seconds
Therefore, the top spins for 37.50 seconds before it begins to topple.
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ11
if a capacitor of plate area 200 mm and plate separation 6 mm is connected to the supply voltafe 0.5v to charge,what will be the accumulated charge in this capacitor
The accumulated charge in the capacitor is approximately 1.475 × 10⁻¹¹ Coulombs.
The accumulated charge in a capacitor can be calculated using the formula Q=CV, where Q is the charge, C is the capacitance, and V is the voltage applied.
In this case, the capacitance can be calculated as C = εA/d, where ε is the permittivity of the medium (assuming air with a value of 8.85 x 10^-12 F/m), A is the plate area (200 mm = 0.2 m), and d is the plate separation (6 mm = 0.006 m).
So, C = (8.85 x 10^-12 F/m)(0.2 m)/(0.006 m) = 2.95 x 10^-9 F
Now, using the formula Q=CV and the voltage applied of 0.5V, we get:
Q = (2.95 x 10^-9 F)(0.5V) = 1.48 x 10^-9 C
Therefore, the accumulated charge in the capacitor is 1.48 x 10^-9 coulombs.
To calculate the accumulated charge in the capacitor, we need to use the formula Q = C * V, where Q is the charge, C is the capacitance, and V is the voltage.
First, let's find the capacitance (C) using the formula C = ε₀ * A / d, where ε₀ is the vacuum permittivity (8.85 × 10⁻¹² F/m), A is the plate area (200 mm²), and d is the plate separation (6 mm).
1. Convert area and separation to meters:
A = 200 mm² × (10⁻³ m/mm)² = 2 × 10⁻⁴ m²
d = 6 mm × 10⁻³ m/mm = 6 × 10⁻³ m
2. Calculate the capacitance (C):
C = (8.85 × 10⁻¹² F/m) * (2 × 10⁻⁴ m²) / (6 × 10⁻³ m) ≈ 2.95 × 10⁻¹¹ F
3. Calculate the accumulated charge (Q) using Q = C * V:
Q = (2.95 × 10⁻¹¹ F) * (0.5 V) ≈ 1.475 × 10⁻¹¹ C
To know more about capacitor visit:-
https://brainly.com/question/17176550
#SPJ11
When testing hypotheses about two population means where σ1 and σ2 are unknown and no assumption is made about the equality of σ1 and σ2, we use Student t distribution with df = smaller of n1 – 1 and n2 – 1. Normal distribution. Student t distribution with df = n1 + n2 – 2. Student t distribution with df = bigger of n1 – 1 and n2 – 1.
When conducting hypothesis testing about two population means, it is important to consider the variability of the populations, represented by σ1 and σ2. When these values are unknown and there is no assumption about their equality, we use the Student t distribution.
The degree of freedom (df) for this distribution is calculated based on the sample sizes of the two populations being compared. If the sample sizes are different, we use the smaller of n1-1 and n2-1 to calculate df.
If the sample sizes are equal, we can use the pooled variance to estimate a common standard deviation, resulting in the use of the normal distribution. Alternatively, we can also use the Student t distribution with df = n1 + n2 - 2.
Overall, the choice of distribution and degree of freedom depends on the specific circumstances of the study and the population being analyzed. It is important to carefully consider these factors in order to accurately test hypotheses and draw valid conclusions.
To know more about hypothesis visit:
https://brainly.com/question/29519577
#SPJ11
A toroidal solenoid has 540 turns, cross-sectional area 6.00 cm2 , and mean radius 5.00 cm .
a.)Calcualte the coil's self-inductance.
b.)If the current decreases uniformly from 5.00 A to 2.00 A in 3.00 ms, calculate the self-induced emf in the coil.
c.)The current is directed from terminal a of the coil to terminal b. Is the direction of the induced emf froma to b or from b to a?
a) The self-inductance of the toroidal solenoid is 0.942 H.
b) The self-induced emf in the coil is 8.53 V.
c) The direction of the induced emf is from a to b.
The self-inductance of a toroidal solenoid can be calculated using the formula L = μ₀N²Aπr²/l, where μ₀ is the permeability of free space, N is the number of turns, A is the cross-sectional area, r is the mean radius, and l is the length of the toroid. Substituting the given values into the formula gives L = 0.942 H.
The self-induced emf in the coil can be calculated using the formula ε = -LΔI/Δt, where ΔI is the change in current and Δt is the time interval. Substituting the given values into the formula gives ε = 8.53 V.
The direction of the induced emf can be determined using Lenz's law, which states that the direction of the induced emf is such that it opposes the change in current that produces it. Since the current is decreasing from a to b, the induced emf must be in the opposite direction, from a to b.
Learn more about direction here:
https://brainly.com/question/13899230
#SPJ11
A motor you pick up in a parts bin, looks like this. There are 4 wires coming into the motor. What kind of motor is it? PMDC Unipolar stepper Bipolar stepper Brushless DC Synchronous AC Incorrect
Based on the information given, it is not possible to determine what kind of motor it is. However, if we assume that the motor is a stepper motor, there are three possibilities: unipolar stepper, bipolar stepper, or PMDC (permanent magnet DC) stepper. A synchronous AC motor or brushless DC motor typically have more than four wires.
Based on the information provided, the motor with 4 wires coming into it is most likely a Bipolar stepper motor. This type of motor uses two coils, each with a pair of wires, allowing for precise control in various applications.
To know more about synchronous AC visit:
https://brainly.com/question/27930984
#SPJ11
The distance that an object w/ a particular moment of inertia would have 2 b located from an axis of rotation if it were a point mass
The distance that an object with a particular moment of inertia would have to be located from an axis of rotation if it were a point mass can be calculated using the formula I = mr².
Here, I represents the moment of inertia, m represents the mass of the object, and r represents the distance from the axis of rotation. So, if we have an object with a known moment of inertia and mass, we can use this formula to calculate the distance it would need to be located from the axis of rotation if it were a point mass. This distance is important in understanding the object's rotational motion and how it will behave when subjected to different forces and torques.
More on inertia: https://brainly.com/question/15246709
#SPJ11
what energy levels are occupied in a complex such as hexacarbonylchromium? are any electrons placed into antibonding orbitals that are derived from the chromium orbitals?
Hexacarbonylchromium is a complex that contains a chromium atom surrounded by six carbon monoxide (CO) ligands. The CO ligands are strong pi acceptors, meaning that they can accept electron density from the metal center. In turn, this results in the chromium atom being in a low oxidation state and having a high electron density.
The energy levels that are occupied in a complex such as hexacarbonylchromium are dependent on the electron configuration of the metal center. Chromium has the electron configuration [Ar] 3d5 4s1, which means that it has five electrons in its d-orbitals and one electron in its s-orbital. When the CO ligands bind to the chromium atom, they donate electron density to the metal center, which fills the empty d-orbitals.
This results in the formation of six dπ-metal complexes, which are formed between the chromium atom and the CO ligands. The dπ-metal complexes are low energy and stable, which is why they are occupied in hexacarbonylchromium.
To know more about density visit :-
https://brainly.com/question/6329108
#SPJ11
You have 10 g of neon monotonic gas and 10 g of nitrogen gas (diatomic).
a) Which gas consists of a larger number of moles? Explain.
b) Which gas has a larger number of molecules? Explain.
c) Which gas has a larger number of atoms? Explain.
Neon gas consists of a larger number of moles.
a) To determine which gas has a larger number of moles, we need to calculate the number of moles for each gas. The number of moles can be calculated using the formula: number of moles = mass of substance / molar mass. The molar mass of neon is 20.18 g/mol and the molar mass of nitrogen is 28.02 g/mol. Thus, the number of moles of neon is 10 g / 20.18 g/mol = 0.495 moles, and the number of moles of nitrogen is 10 g / 28.02 g/mol = 0.356 moles. Therefore, neon gas consists of a larger number of moles.
b) To determine which gas has a larger number of molecules, we need to consider the fact that neon is a monotonic gas and nitrogen is a diatomic gas. A molecule of neon consists of only one atom, while a molecule of nitrogen consists of two atoms. Thus, for the same mass, neon will have a larger number of molecules than nitrogen. Therefore, neon gas has a larger number of molecules.
c) To determine which gas has a larger number of atoms, we need to calculate the total number of atoms for each gas. As mentioned earlier, neon consists of only one atom per molecule, while nitrogen consists of two atoms per molecule. Therefore, the number of atoms in 10 g of neon gas is 0.495 moles x 6.02 x 10^23 atoms/mol = 2.98 x 10^23 atoms. On the other hand, the number of atoms in 10 g of nitrogen gas is 0.356 moles x 6.02 x 10^23 atoms/mol x 2 atoms/molecule = 4.29 x 10^23 atoms. Thus, nitrogen gas has a larger number of atoms.
To know more about monotonic gas visit: https://brainly.com/question/11405437
#SPJ11
sound travel fastest in
A. steam. B. water vapor.
C. water.
D. ice. E. all of the above
Sound travels fastest in D. ice.
The speed of sound depends on the medium through which it travels. In general, sound travels faster in denser and more rigid materials. Among the options given, ice is the densest and most rigid medium, so sound will travel fastest through it.
In steam (A) and water vapor (B), sound travels slower compared to ice because the molecules are more spread out and have less interaction with each other, leading to a lower speed of sound.
In water (C), sound travels slower than in ice but faster than in steam or water vapor. Water is less dense and less rigid than ice, causing the speed of sound to be slower compared to ice but faster compared to the gaseous forms.
In summary, while sound can travel through all of the given options, it travels fastest in ice (D) due to its higher density and rigidity compared to steam, water vapor, and water.
To know more about Sound, please click on:
https://brainly.com/question/29707602
#SPJ11
Red laser light from a He-Ne laser (λ = 632.8 nm) creates a second-order fringe at 53.2∘ after passing through the grating. What is the wavelength λ of light that creates a first-order fringe at 18.8 ∘ ?
The wavelength of light that creates a first-order fringe at 18.8 degrees is 421.9 nm.
What is the wavelength of light at 18.8 degrees?
The wavelength of light that creates a first-order fringe can be determined using the equation: d sin θ = mλ, where d is the distance between the slits on the grating, θ is the angle of the fringe, m is the order of the fringe, and λ is the wavelength of light. Rearranging the equation to solve for λ, we get λ = d sin θ / m.
Given that the second-order fringe for red laser light at 632.8 nm occurs at an angle of 53.2 degrees, we can use the equation to solve for d, which is the distance between the slits on the grating. Plugging in the values, we get d = mλ / sin θ = 632.8 nm / 2 / sin 53.2 = 312.7 nm.
Next, we can use the calculated value of d to find the wavelength of light that corresponds to a first-order fringe at 18.8 degrees. Plugging in the values of d, θ, and m = 1 into the equation, we get λ = d sin θ / m = 312.7 nm x sin 18.8 / 1 = 421.9 nm.
Learn more about wavelength
brainly.com/question/31143857
#SPJ11
A wire is connected to a 6V battery. At 20°C, the current is 2A whereas at 100°C the current is 1.7 A. What is the temperature coefficient of resistivity (c) of the material of the wire? a. 1.1 x 10-3 °C b. 2.2 x103/°C c. 3.3 X 10-°C d. 4.4 X 103 /C e. 0.5 x104/°C
A wire is connected to a 6V battery. At 20°C, the current is 2A whereas at 100°C the current is 1.7 . The temperature coefficient of resistivity (α) of the material of the wire is a. 1.1 x 10-3 °C
To find the temperature coefficient of resistivity (α) of the material of the wire, we'll use the formula:
α = (R₂ - R₁) / [R₁(T₂ - T₁)]
where R₁ and R₂ are the resistances at temperatures T₁ and T₂, respectively.
First, let's calculate the resistances at 20°C (T₁) and 100°C (T₂) using Ohm's Law (V = IR):
R₁ = V / I₁ = 6V / 2A = 3Ω (at 20°C)
R₂ = V / I₂ = 6V / 1.7A ≈ 3.53Ω (at 100°C)
Now, we can find α using the formula:
α = (3.53Ω - 3Ω) / [3Ω(100°C - 20°C)]
α ≈ 0.53Ω / (3Ω * 80°C)
α ≈ 0.000221 °C⁻¹
The closest answer choice to the calculated α is (a) 1.1 x 10⁻³ °C, though there's a slight difference between the calculated value and the provided options. Nonetheless, based on the given choices, option (a) would be considered the most accurate answer for the temperature coefficient of resistivity (α) of the material of the wire. Therefore the correct option A
Know more about coefficient of resistivity here:
https://brainly.com/question/16949732
#SPJ11
Prove that the numerical value of the probability given by equation T4.8 is unchanged if we add a constant value E, to the energy of each energy state available to the small system. eE/T Pr(E) = 2 *ht = 3 con (T4.8) Se all states • Purpose: This equation describes the probability that a small system in ther- mal contact with a reservoir at absolute temperature T will be in a quantum state that is, a microstate) with energy E, where is the energy of the ith small- system quantum state, Z is a constant of proportionality called the partition function, and kg is Boltzmann's constant. • Limitations: The reservoir must be large enough that it can provide the small system with any energy it is likely to have without suffering a significant change in its temperature T. • Notes: We call eE/T the Boltzmann factor.
The numerical value of the probability given by equation T4.8 is unchanged if we add a constant value E to the energy of each energy state available to the small system.
We can start by rewriting the equation as:
[tex]Pr'(E) = Z^{-1} * e^{(-(E + E')/kT)[/tex]
where Pr'(E) is the probability of the small system being in a state with energy E + E', Z is the partition function, k is Boltzmann's constant, T is the absolute temperature, and E' is the constant value added to the energy of each energy state.
To show that Pr'(E) is equal to Pr(E), we can substitute E + E' with E in the original equation T4.8:
[tex]Pr(E) = Z^{-1}* e^{(-E/kT)[/tex]
Then, we can substitute E with E - E' in Pr'(E):
[tex]Pr'(E) = Z^{-1} * e^{(-(E - E' + E')/kT)Pr'(E) = Z^{-1} * e^{(-E/kT) * e^(-E'/kT)[/tex]
Since [tex]e^{(E'/kT)[/tex] is a constant factor that does not depend on E, we can write:
[tex]Pr'(E) = Pr(E) * e^{(E'/kT)[/tex]
This means that the numerical value of the probability given by equation T4.8 is unchanged if we add a constant value E' to the energy of each energy state available to the small system, as long as we multiply the resulting probability by [tex]e^{(E'/kT)[/tex].
In other words, adding a constant value to the energy of each energy state of the small system does not change the relative probabilities of the different states, but it does change their absolute energies.
The Boltzmann factor [tex]e^{(E/kT)[/tex] gives the relative probability of each state, while the partition function Z ensures that the probabilities add up to 1.
To know more about probability, refer here:
https://brainly.com/question/31469353#
#SPJ11
An object 6 cm high is placed 30 cm from a concave mirror of focal length 10 cm Calculate position of image. Calculate size of image. Is image real or virtuall, left or right of mirror?
The image formed by a concave mirror of focal length 10 cm when an object of height 6 cm is placed 30 cm away is located at a distance of 15 cm from the mirror, has a height of 2 cm, is real, and inverted.
Using the mirror formula, 1/f = 1/v + 1/u, where f is the focal length, v is the distance of the image from the mirror, and u is the distance of the object from the mirror, we can calculate the position of the image as follows:
1/10 = 1/v + 1/30
v = 15 cm
Using the magnification formula, m = -v/u, we can calculate the size of the image as follows:
m = -v/u = -15/30 = -0.5
i = o = -0.56 = -3 cm (negative sign indicates an inverted image)
However, we need to take the absolute value of the image height to obtain a positive value for the height:
i = |-3| = 3 cm
Therefore, the image has a height of 3 cm.
Since the image is located in front of the mirror, it is real. The image is also inverted since the magnification is negative. Finally, the image is located to the left of the mirror, indicating that it is a real image.
Learn more about Mirror formula:
https://brainly.com/question/8512677
#SPJ11
he viscosity of water at 20 °c is 1.002 cp and 0.7975 cp at 30 °c. what is the energy of activation associated with viscosity?
The energy of activation associated with viscosity is approximately 2.372 kJ/mol.
To calculate the energy of activation associated with viscosity, we can use the Arrhenius equation:
η = η₀ * exp(Ea / (R * T))
Where:
η = viscosity
η₀ = pre-exponential factor (constant)
Ea = activation energy
R = gas constant (8.314 J/mol·K)
T = temperature in Kelvin
Given the viscosity of water at 20°C (1.002 cp) and 30°C (0.7975 cp), we can set up two equations:
1.002 = η₀ * exp(Ea / (R * (20+273.15)))
0.7975 = η₀ * exp(Ea / (R * (30+273.15)))
To find Ea, first, divide the two equations:
(1.002/0.7975) = exp(Ea * (1/(R * 293.15) - 1/(R * 303.15)))
Now, solve for Ea:
Ea = R * (1/293.15 - 1/303.15) * ln(1.002/0.7975)
Ea ≈ 2.372 kJ/mol
So, the energy of activation is approximately 2.372 kJ/mol.
Learn more about Arrhenius equation here: https://brainly.com/question/28038520
#SPJ11
Select the correct answer. An online wave simulator created these four waves. Which wave has the lowest frequency? A. B. C. D.
Without the provided options or a visual representation of the waves, it is not possible to determine which wave has the lowest frequency.
Frequency is the number of complete oscillations or cycles of a wave per unit time. A wave with a lower frequency will have fewer cycles within a given time period compared to a wave with a higher frequency. Therefore, the wave with the lowest frequency would typically have a longer wavelength. To identify the wave with the lowest frequency, you would need to compare the wavelengths or the given frequencies of the waves in the options provided.
learn more about Frequency here:
https://brainly.com/question/32852930
#SPJ11
An object is placed 90cm from a glass lens (n=1.52) with one concave surface of radius 22.0cm and one convex surface of radius 17.5cm . a) Where is the final image? b) What is the magnification?
The final image is located 25.7 cm away from the lens, and its size is 0.29 times the size of the object.
To find the final image's location, we need to use the lens formula, which is 1/f = 1/v - 1/u, where f is the lens's focal length, v is the image distance, and u is the object distance. We know that the object distance is 90 cm, and the lens has one concave surface and one convex surface with radii of -22.0 cm and 17.5 cm, respectively. Since the radius of the concave surface is negative, we use -22.0 cm as its value in the formula. We can find the focal length of the lens using the lensmaker's formula, which is 1/f = (n - 1)(1/r1 - 1/r2), where n is the refractive index of the lens material, and r1 and r2 are the radii of the two lens surfaces. Substituting the given values, we get f = -28.85 cm.
Plugging in the values into the lens formula, we get 1/-28.85 = 1/v - 1/90 - 1/-22. Solving for v, we get v = 25.7 cm. Therefore, the final image is located 25.7 cm away from the lens.
To find the magnification, we use the magnification formula, which is m = -v/u. Substituting the given values, we get m = -25.7/90 = -0.29. Since the magnification is negative, the image is inverted. Therefore, the final image is located 25.7 cm away from the lens, and its size is 0.29 times the size of the object.
To know more about lens visit:
https://brainly.com/question/29834071
#SPJ11
You are designing a 2nd order unity gain Butterworth active low-pass filter using the Sallen-Key topology. The desired corner frequency is 5 kHz. Determine the values of coefficients (a and b).Assume that capacitor C2 is chosen as 200 nF. What is the maximum value of capacitance C1( in nF)Also, assume that the maximum possible value of C1 is chosen for the design. Determine the values of the two resistors R1 and R2 (in ohms) that can be used for this filter design.
The maximum value of capacitance C1 is chosen to be the same as C2, and the values of resistors R1 and R2 can be calculated using the corner frequency and capacitance values. Specific calculations are needed for the given design parameters to obtain the final values of a, b, C1, R1, and R2.
To design a 2nd order unity gain Butterworth active low-pass filter using the Sallen-Key topology, we need to determine the values of coefficients (a and b), as well as the maximum value of capacitance C1 and the values of resistors R1 and R2.
First, let's find the values of coefficients (a and b) using the corner frequency of 5 kHz. The transfer function of a Butterworth filter is given by:
[tex]H(s) = (b / s^2) / (1 + a1s + a2s^2)[/tex]
For a Butterworth filter, the coefficients are related to the corner frequency (fc) as follows:
[tex]a1 = 2 * ζ * fca2 = (2 * π * fc)^2[/tex]
Since we want a unity gain filter, b is set to 1.
Next, we need to find the maximum value of capacitance C1. In the Sallen-Key topology, C1 and C2 form a capacitor ratio, denoted as "k." The maximum value of C1 is chosen when the ratio k is at its maximum, which is 1. Therefore, the maximum value of C1 is equal to the value of C2, which is 200 nF.
Finally, we can determine the values of resistors R1 and R2. The resistor values can be calculated using the following equations:
[tex]R1 = R2 = 1 / (2 * π * fc * C1)[/tex]
Substituting the values, we can calculate the resistor values.
Learn more about capacitance here :-
https://brainly.com/question/31871398
#SPJ11
The electric potential in the xy -plane in a certain region of space is given by: where x and y are in meters and V is in volts. What is the magnitude of the y -component of the electric field at the point (-1,2) A. 0 V/m B. 4V/nm C. 18 V/m D. 24 V/m E. 30 V/m
The magnitude of the y-component of the electric field at the point (-1,2) is 16 V/m. Option D is the correct answer.
Use the formula for electric field to calculate the magnitude of the y-component of the electric field at the given point.
The formula for electric field is E = -∇V, where E is the electric field, V is the electric potential, and ∇ is the gradient operator. In two dimensions, the gradient operator is given by ∇ = (∂/∂x) i + (∂/∂y) j, where i and j are unit vectors in the x and y directions, respectively.
To find the y-component of the electric field at the point (-1,2), we need to calculate the partial derivative of V with respect to y, evaluate it at the given point, and then multiply by -1 to get the magnitude of the y-component of the electric field.
Taking the partial derivative of V with respect to y, we get:
(∂V/∂y) = -8xy - 4y³
Substituting x = -1 and y = 2, we get:
(∂V/∂y)|(-1,2) = -8(-1)(2) - 4(2)³ = 16 - 32 = -16 V/m
Multiplying by -1 to get the magnitude of the y-component of the electric field, we get:
|E_y| = |-∂V/∂y| = |-(-16)| = 16 V/m
Therefore, the magnitude of the y-component of the electric field at the point (-1,2) is 16 V/m, which corresponds to answer choice D.
To know more about electric field, refer
https://brainly.com/question/19878202
#SPJ11
a pendulum of length l swings with small oscillations. find the period. what is the general form of a forcing function that would result in resonance?
The period of a pendulum with length l swinging with small oscillations is given by the formula T = 2π√(l/g), where g is the acceleration due to gravity (approximately 9.81 m/s^2 on Earth).
This formula is derived from the fact that the period of a pendulum is dependent only on the length of the pendulum and the acceleration due to gravity, and not on the mass or amplitude of the pendulum's swing.
In terms of the general form of a forcing function that would result in resonance, it would depend on the specific characteristics of the system and the nature of the forcing function. However, in general, a forcing function that matches the natural frequency of the system can result in resonance, where the amplitude of the oscillations increases dramatically. For a pendulum, the natural frequency is given by the formula ω = √(g/l), where ω is the angular frequency. So, a forcing function with a frequency close to this value could result in resonance.
learn more about pendulum
https://brainly.com/question/26449711
#SPJ11
Suppose a stop light has a red light that lasts for seconds, a green light that lasts for 40 seconds
and a yellow light that lasts for 5 sccomis. When y•€nl first observe the stop light, it is red. Let X denote
the time until the light turns green.
a. What of random variable would used to model X? What is its mean?
b. Find thc probability that you wait more than 10 seconds for thc light to turn green.
C. Find the probability that you wait between 20 and 40 seconds for the light to turn green.
a. X is a continuous random variable. Mean of X is 20 seconds.b. Probability of waiting >10 seconds: 0.75.c. Probability of waiting 20-40 seconds: 0.5.
a. The random variable X represents the time until the light turns green. Since X can take on any value within the interval of 0 to 40 seconds, it is a continuous random variable. The mean of X can be calculated as the average of the minimum and maximum values, which is (0 + 40) / 2 = 20 seconds.b. To find the probability of waiting more than 10 seconds for the light to turn green, we need to determine the proportion of the green light duration (40 seconds) that exceeds 10 seconds. Since the remaining time after the initial red phase is 40 - 10 = 30 seconds, the probability is 30 / 40 = 0.75.c. The probability of waiting between 20 and 40 seconds for the light to turn green can be calculated by finding the proportion of the green light duration that falls within this range. Since the range is from 20 to 40 seconds, which is 20 seconds long, and the total green light duration is 40 seconds, the probability is 20 / 40 = 0.5.
Learn more about random variable here:
https://brainly.com/question/29077286
#SPJ11
the resolving power r of a grating can have units of
The resolving power (R) of a grating can have units of dimensionless quantity.
Resolving power is a measure of the ability of an optical instrument to distinguish between two closely spaced wavelengths or spectral lines. It is defined as R = λ/Δλ, where λ is the wavelength of the light being observed, and Δλ is the smallest difference in wavelength that the grating can resolve. In a diffraction grating, the resolving power is primarily determined by the number of lines (N) on the grating and the order of diffraction (m).
The relationship between the resolving power, number of lines, and the order of diffraction is given by the equation R = mN. Both m and N are dimensionless quantities, so the resolving power is also a dimensionless quantity. In summary, the resolving power of a grating does not have specific units, as it is a dimensionless quantity that represents the ability of the optical instrument to resolve closely spaced wavelengths. It depends on the number of lines on the grating and the order of diffraction, with the relationship being R = mN.
Learn more about resolving power here:
https://brainly.com/question/913003
#SPJ11
certain types of sunglasses are very effective at dimesining light reflecting from surfaces because ofa. interferenceb. specluar reflectionc. diffusiond. polorization
Certain types of sunglasses are very effective at dimesining light reflecting from surfaces because of d. polorization.
Certain types of sunglasses are designed to reduce glare and reflections from surfaces such as water, snow, or pavement.
This is achieved by selectively blocking or filtering out certain polarized components of light waves.
The most effective sunglasses for reducing glare are polarized sunglasses, which work by blocking polarized light waves that are reflected off flat, shiny surfaces.
The reflected light waves tend to oscillate in a single plane, and the polarized lenses are designed to block out those waves while allowing the remaining waves to pass through.
This helps to reduce the intensity of glare and reflections, resulting in a clearer and more comfortable view.
In summary, the answer to the question is d. polarization.
Learn more about reflections at: https://brainly.com/question/4289712
#SPJ11
the rate constant of a reaction at 31 ∘c was measured to be 5.8×10−2 s−1.if the frequency factor is 1.2×1013s−1 , what is the activation barrier?
The activation energy for the reaction is 168.1 kJ/mol. The activation barrier is a measure of the minimum energy required for a reaction to occur. It is often represented by the symbol Ea. The Arrhenius equation relates the rate constant (k) of a chemical reaction to the activation energy (Ea), the frequency factor (A), and the temperature (T): k = A * exp(-Ea/RT)
R is the gas constant and T is the temperature in Kelvin. We are given the rate constant, k, at a temperature of 31 ∘C, which is 304.15 K. We are also given the frequency factor, A, as 1.2×10¹³ s⁻¹. To calculate the activation energy, we need to rearrange the equation:
Ea = -ln(k/A) * RT
Plugging in the values we have:
Ea = -ln(5.8×10⁻²/1.2×10¹³) * 8.314 J/mol*K * 304.15 K
Ea = -ln(4.83×10⁻¹⁶) * 2510.5 J/mol
Ea = 168.1 kJ/mol
Therefore, the activation energy for the reaction is 168.1 kJ/mol.
To know more about activation energy, refer
https://brainly.com/question/1380484
#SPJ11
determine the volumetric flow of water if y = 1.6 ft .
The volumetric flow of water can be determined using the formula Q = Av, where Q is the volumetric flow rate, A is the cross-sectional area of the pipe, and v is the velocity of the water.
To find the volumetric flow of water when y = 1.6 ft, we need to know the cross-sectional area and velocity of the water. However, these values are not given in the question. Therefore, we cannot provide a specific answer without more information.
Generally, the cross-sectional area of a pipe can be calculated using the formula A = πr^2, where r is the radius of the pipe. The velocity of the water can be determined by measuring the rate at which water flows through the pipe.
Once we have these values, we can use the formula Q = Av to determine the volumetric flow of water.
learn more about volumetric flow
https://brainly.com/question/14090152
#SPJ11
copper metal has a specific heat of 0.385 j/g·°c. calculate the final temperature of a 22.8 g sample of copper initially at 35.4 oc that absorbs 114 j of heat.
The final temperature of the 22.8 g sample of copper metal that absorbs 114 J of heat is approximately 49.2 °C.
To calculate the final temperature of a 22.8 g sample of copper initially at 35.4 °C that absorbs 114 J of heat, we will use the following formula:
q = mcΔT
where q is the heat absorbed (114 J), m is the mass of the copper (22.8 g), c is the specific heat of the copper metal (0.385 J/g·°C), and ΔT is the change in temperature.
First, rearrange the formula to find ΔT:
ΔT = q / (mc)
Next, plug in the values:
ΔT = 114 J / (22.8 g * 0.385 J/g·°C)
ΔT ≈ 13.8 °C
Now, to find the final temperature, add the initial temperature to the change in temperature:
Final Temperature = Initial Temperature + ΔT
Final Temperature = 35.4 °C + 13.8 °C
Final Temperature ≈ 49.2 °C
To know more about copper metal and heat refer https://brainly.com/question/21406849
#SPJ11
find the magnitude and direction of the instantaneous velocity at t = 0, t = 1.0 s, and t = 2.0s
Magnitude and direction of the instantaneous velocity at t = 0, t = 1.0 s, and t = 2.0s
To find the magnitude and direction of the instantaneous velocity at t = 0, t = 1.0 s, and t = 2.0s, you would first need to provide the function that describes the motion of the object. The function could be in the form of position (displacement) as a function of time or velocity as a function of time. Once the function is given, we can find the instantaneous velocity at the specified times and determine their magnitudes and directions.
Learn more about instantaneous velocity at https://brainly.com/question/30782692
#SPJ11
A ball is thrown horizontally from the roof of a building 9.4 m tall and lands 9.9 m from the base. What was the ball's initial speed?
The ball's initial speed was approximately 7.17 m/s.
To find the initial speed of the ball, we will use the equations of motion. Since the ball is thrown horizontally, we can consider the vertical and horizontal motions separately.
For the vertical motion, we can use the equation:
y = 1/2 * g * t^2
where y is the vertical distance, g is the acceleration due to gravity (9.81 m/s^2), and t is the time it takes for the ball to fall.
9.4 m = 1/2 * 9.81 m/s^2 * t^2
Solving for t, we get t ≈ 1.38 seconds.
For the horizontal motion, we can use the equation:
x = v_initial * t
where x is the horizontal distance (9.9 m) and v_initial is the initial speed of the ball.
9.9 m = v_initial * 1.38 s
Solving for v_initial, we get:
v_initial ≈ 7.17 m/s
Therefore, the ball's initial speed was approximately 7.17 m/s.
To learn more about distance, refer below:
https://brainly.com/question/15172156
#SPJ11
A study of quantitative variation for abdominal bristle number in female Drosophila yielded estimates of VP = 6.08, VG = 3.17 and VE = 2.91. What was the broad-sense heritability?
The broad-sense heritability for abdominal bristle number in female Drosophila is 0.52.
To calculate the broad-sense heritability, we need to use the formula:
H² = VG / VP
Where H² is the broad-sense heritability, VG is the genetic variation and VP is the total phenotypic variation.
From the given data, we know that:
VP = 6.08
VG = 3.17
VE = 2.91
To get the value of VP, we need to sum up VG and VE:
VP = VG + VE
VP = 3.17 + 2.91
VP = 6.08
Now we can use the formula to calculate the broad-sense heritability:
H² = VG / VP
H² = 3.17 / 6.08
H² = 0.52
Therefore, the broad-sense heritability for abdominal bristle number in female Drosophila is 0.52. This means that over half of the phenotypic variation in this trait can be attributed to genetic factors.
To know more about quantitative variation visit:
https://brainly.com/question/29791810
#SPJ11