We initialize the parameters to all zero values and run the linear perceptron algorithm through these points in a particular order until convergence. The number of mistakes made on each point are shown in the table below. (These points correspond to the data point in the plot above)

The telephone system is an example of a circuit-switched network.

Yes. The  Traditional telephone systems  such as landlines are known to be a common  example of a technology that are said to often make use of the circuit switching.

Hence, The telephone system is an example of a circuit-switched network is a true statement.

Learn more about telephone  from

https://brainly.com/question/917245

#SPJ1

In the case above, the thing that should be done is for one to Drop the packet.

A router is known to be a form of a physical or virtual tools that often helps one to pass information and it is said to be between two or more packet-switched computer networks.

Note that, In the case above, the thing that should be done is for one to Drop the packet.

Learn more about router from

https://brainly.com/question/24812743

#SPJ1

A terminology which best describe Kevin's goal in terms of expansion and contraction as needs change is: A. Scalability.

Scalability can be defined as a measure of the ability of a system to change (expansion or contraction) in performance and cost as a result of changes in demands of application and system processing, especially in a network architecture.

In this context, we can logically deduce that a terminology which best describe Kevin's goal in terms of expansion and contraction as needs change is scalability.

Read more on scalability here: brainly.com/question/14301721

#SPJ1

Complete Question:

Kevin would like to ensure that his software runs on a platform that is able to expand and contract as needs change.  Which one of the following terms best describes his goal? A. Scalability B. Elasticity C. Cost effectiveness D. Agility

The on-premise approach is often chosen by organizations with an established IT infrastructure.

In an on-premises method, resources are said to be given or deployed in-house and it is one that is found within an enterprise's IT infrastructure.

Customer relationship management (CRM) is known to be a form of a technology that is often used in the act of managing all of a firm's  relationships and communications with customers and also that of potential customers.

Therefore, The on-premise approach is often chosen by organizations with an established IT infrastructure.

Learn more about CRM from

https://brainly.com/question/27373018

#SPJ1

Password complexity, password history, and password reuse are all examples of account policies.

This refers to the document which contains the requirements necessary for maintaining or creating an account on computer systems or networks.

These policies vary from password complexity to avoid accounts being compromised to password history so as to be able to recover passwords on the system. This is achieved by the use of unique letters and numbers which are difficult to access by a third party thereby making it the most appropriate choice.

Read more about Account policies here https://brainly.com/question/14364696

#SPJ1

Answer:

FALSE is the answer of that question

I HOPE IT HELP YOU

Out-of-band management is required to establish a new network switch and configure its IP address for the first time.

Out-of-Band management is known to be a form of services that makes sure that a tech do not require to be sent onsite and it is one where remediation can be done in a remote place.

Hence,  Out-of-band management is required to establish a new network switch and configure its IP address for the first time.

See full question below

Which of the following is required to establish a new network switch and configure its IP address for the first time?

A. Client-to-site VPN

B. Site-to-site VPN

C. Out-of-band management

D. In-band management

Learn more about IP address from

https://brainly.com/question/24930846

#SPJ1

The place where the customer information, such as news articles, videos, large amounts of text, images, or audio files, generally get stored for web services is the database.

It should be noted that the database is a collection of structured information or data that are stored in the electronic system.

In this case, the place where the customer information, such as news articles, videos, large amounts of text, images, or audio files, generally get stored for web services is the database. It is conteolled by the database management system.

Learn more about database on:

brainly.com/question/26096799

#SPJ1

When a business firm such as Starbucks sells its products (coffee and mugs) to the general public on its website, it is a B2C sale.

B2C is a business model which literally means business to consumer and it can be defined as a market which involves businesses selling their products and services directly to the end consumers for their personal use, usually over a website.

In this context, we can infer and logically deduce that when a business firm such as Starbucks sells its products (coffee and mugs) to the general public on its website, it is a B2C sale.

Read more on B2C here: https://brainly.com/question/2829594

#SPJ1

Wikis is the one on which should you be most careful about trusting the information you come across as it may seem academically reviewed but in fact is not.

A wiki is known to be a form of a collaborative tool that is used and one that aids students to make their own contribution and change one or more pages of course linked materials.

Note that based on the above, Wikis is the one on which should you be most careful about trusting the information you come across as it may seem academically reviewed but in fact is not.

Learn more about Wikis from

https://brainly.com/question/25153373

#SPJ1

In the case above, file name do not reflect best practices and as such it is No. A file name must include the date, the author, and the version number.

A file name is known to be the key identifier of a file and a Good file name need to present some clues in regards to its content, status and version.

Hence, In the case above, file name do not reflect best practices and as such it is No. A file name must include the date, the author, and the version number.

See options below

Does this file name reflect best practices?1 point

Yes. A file name should include the project name and version.

No. A file name must include the date, the author, and the version number.

Learn more about file name from

https://brainly.com/question/1982059

#SPJ1

Header file guards are preprocessor directives with the primary role to cause the compiler to allow defining a function that are usable throughout a user's program.

A header file can be defined as a type of file which comprises macro definitions and C declarations and they are meant to be shared between several source files.

In Computer programming, header file guards are preprocessor directives with the primary role to cause the compiler to allow defining a function that are usable throughout a user's program.

Read more on header file here: https://brainly.com/question/23678678

#SPJ1

The items that are key features of reading replicas are

This is further explained below.

Generally, A disaster recovery plan, often known as a DRP, is a well-documented and organized strategy that outlines how an organization may swiftly go back to work in the aftermath of an unexpected event.

In conclusion, A disaster recovery plan, also known as a DR plan, is a formal document that is drafted by an organization and provides step-by-step instructions on how to react to unanticipated occurrences such as natural disasters, power outages, cyber-attacks, and any other kind of event that is disruptive.

Read more about the DR plan

https://brainly.com/question/2681783

#SPJ1

In computer, the guidelines that should be followed prior to ordering and installing memory in an hp business pc or notebook is to verify that the network cable is plugged in.

It should be noted that a computer simply means the electronic device that can be used to make one's work easier.

In this case, in computer, the guidelines that should be followed prior to ordering and installing memory in an hp business pc or notebook is to verify that the network cable is plugged in. This is important to allow for easy installation.

Learn more about computer on:

brainly.com/question/24540334

#SPJ1

Using the knowledge in computational language in JAVA it is possible to write the code being methods define a method named getWordFrequency that takes an array of strings

import java.util.*;

public class WordFrequency {

       public static int getWordFrequency(String[] wordsList , int listSize , String currWord) {

               HashMap<String , Integer> hm = new HashMap<>();

               for(String st : wordsList) {

                       String str = st.toLowerCase();

                       hm.put(str, hm.getOrDefault(str, 0) + 1);

               }

               for(String st : wordsList) {

                       String str = st.toLowerCase();

                       System.out.println(st + " " + hm.get(str));

               }

               String currWordToLowerCase = currWord.toLowerCase();

               return hm.get(currWordToLowerCase);

       }

       public static void main(String[] args) {

               // TODO Auto-generated method stub

               String[] wordsList = {"hey" , "Hi" , "Mark" , "hi" , "mark"};

               int listSize = wordsList.length;

               String currWord = "hey";

               System.out.println("The frequency of " + currWord + " is : " + getWordFrequency(wordsList , listSize , currWord));

       }

}

See more about JAVA at brainly.com/question/12978370

#SPJ1

The facts that are assumed and the facts  that are proven in a direct proof of the theorem is that option a) Assumed: x is rational and y is rational and Proven: x + y is rational.

The term known as theorem is known to be a kind of a formula, or statement that is seen in a lot of mathematics field and it also known top  be the logic deduced.

Note that it is also seen as the result that is said to have been proved to be true (through the use of operations and facts that are said to be already known).

Therefore, The facts that are assumed and the facts  that are proven in a direct proof of the theorem is that option a) Assumed: x is rational and y is rational and Proven: x + y is rational.

Learn more about Theorem from

https://brainly.com/question/343682

#SPJ1

See full question below

Theorem: For any two real numbers, x and y, if x and y are both rational then x + y is also rational. Which facts are assumed and which facts are proven in a direct proof of the theorem?

a) Assumed: x is rational and y is rational

Proven: x + y is rational

b) Assumed: x + y is irrational

Proven: x is irrational and y is irrational

c) Assumed: x + y is rational

Proven: x is rational or y is rational

d) Assumed: x is rational or y is rational

Proven: x + y is rational

If one uses the data above (in billions of dollars), the Gross domestic product (in billions of dollars) for this economy equals  $1,200.

Note that:

GDP (Gross Domestic Product):

Thus it will be :

Consumption + Investment + Government expenditure + (Export - Import)

Which is:

GDP = 800 + 200 + 300 + (100 - 200)

GDP = $1200 billions

See full question below

Consumption expenditures $800

Investment expenditures 200

Government purchases 300

Exports 100

Imports 200

Wages 800

8) Refer to Table above. Consider the data above (in billions of dollars) for an economy: Gross domestic product (in billions of dollars) for this economy equals

A) $2,200.

B) $1,600.

C) $1,400.

D) $1,200.

Learn more about GDP from

https://brainly.com/question/1383956

#SPJ1

IDDFS is known to use both depth-first search’s space-efficiency and also the use of breadth-first search’s fast search due to the fact that  its nodes are closer to the root and IDDFS often calls DFS for a lot of depths starting from a starting value.

The term progressive deepening is known to be if a person is said to be making effort try to approximate a given answer at every level and they often work to go deep towards the leaf nodes based on the time limit that a person have for their move.

Hence, IDDFS is known to use both depth-first search’s space-efficiency and also the use of breadth-first search’s fast search due to the fact that  its nodes are closer to the root and IDDFS often calls DFS for a lot of depths starting from a starting value.

Learn more about deepening from

https://brainly.com/question/27353529

#SPJ1

ERM software modules deal with setting employee objectives, performance, and compensation. option D is the answer.

Software module are component of a program and not the main programme.

They form essential part of the main programme with or more routines. One or more modules developed separately make up a program.

ERM software can be used for various businesses and in organization settings. It helps to identify compensation and monitor performance of the organization.

Enterprise risk software (ERM) is essential in managing various risk attached to a Job.

Therefore, ERM software modules deal with setting employee objectives, performance, and compensation

Learn more on software below

https://brainly.com/question/14635097

#SPJ1

Answer: Distributing malicious flash drives in a parking lot or other high-traffic area, often with a label that will tempt the person who finds it into plugging it in, is a technique used by penetration testers.

Explanation:

Classes that depend on field names from parent classes are generally said to be fragile because they are very prone to coding errors.

A class can be defined as a user-defined blueprint (prototype) or template that is typically used by software programmers to create objects and define the data types, categories, and methods that should be associated with these objects.

In object-oriented programming (OOP) language, a class that is written or created to implement an interface would most likely implement all of that interface's method declarations without any coding error.

In Computer programming, we can infer and logically conclude that classes that are highly dependent on field names from parent classes are generally said to be fragile because they are very prone to coding errors.

Read more on class here: brainly.com/question/20264183

#SPJ1

The program is an illustration of loops, functions and conditional statements

The program written in Java, is as follows:

import java.util.Scanner;

public class Main {

   public static int getFrequencyOfWord(String[] wordsList, int listSize, String currWord) {

       int wordFreq = 0;

       for (int i=0; i<listSize; i++){

           if (wordsList[i].compareToIgnoreCase(currWord)==0){

               wordFreq++;

           }

       }

       return wordFreq;

   }

       public static void main(String[] args) {

           Scanner input = new Scanner(System.in);

           int N = input.nextInt();

           String myArr[] = new String[N];

           for (int i=0; i<N; i++){

               myArr[i] = input.next();

           }

           for (int i=0; i<N; i++){      

               String searchWord = myArr[i];

               int freqCount = getFrequencyOfWord(myArr,N,searchWord);

               System.out.println(searchWord + " " + freqCount);

       }              

  }

}

Read more about java programs at:

https://brainly.com/question/26642771

#SPJ1

The type of network medium Jenny should use is wireless networks.

Given data:

Jenny should use a wireless network medium to create a network that can be accessed from any room in her house without physically connecting.

Wireless networks use radio waves or infrared signals to transmit data between devices, allowing for flexible connectivity without the need for physical cables.

Devices such as smartphones, laptops, tablets, and smart home devices can connect to the wireless network and access the internet or communicate with each other.

To learn more about wireless networks, refer:

https://brainly.com/question/31630650

#SPJ3

The media query that applies when the viewport's width is at least 600px will be:

media only screen and (min-width: 600px) {

   .benefits-container {

       flex-direction: row;

   }

Media queries are the key part of responsive web design that allows the user to create different layouts depending on the size of the viewport.

They can also be used to detect other things about the environment your site is running on.

Learn more about media query on:

https://brainly.com/question/13136637

#SPJ1

The affirmative tú command hacer is known as haz.

The translation are:

The Affirmative tú commands is known to be one that is said to be similar  as the él/ella/Ud.

Note that this  is seen as the conjugation of the present tense and it is one that is often  used to tell another person that you are familiar with that thing.

Hence, The affirmative tú command hacer is known as haz.

Learn more about Spanish words from

https://brainly.com/question/26522612

#SPJ1

On a Local Area Network, or LAN. MAC addresses are the identification that nodes use to communicate with each other internally. This is further explained below.

Generally, A media access control address, often known as a MAC address, is a one-of-a-kind identification that is given to a network interface controller (NIC) in order for it to be used as a network address in communications that take place inside a network segment. This use is typical in the vast majority of networking technologies based on IEEE 802, such as Ethernet, Wi-Fi, and Bluetooth.

In conclusion, On a LAN, or local area network. Nodes interact with each other inside using MAC addresses.

Read more about the MAC address

https://brainly.com/question/27960072

#SPJ1

To perform the tasks you described, you would need administrative privileges or use the appropriate commands with 'sudo'.

A directory, also known as a folder, is a file system construct used to organize and store files and other directories. It acts as a container for grouping related files and subdirectories together in a hierarchical manner. Directories are an essential part of the file system structure in modern operating systems.

Here are the steps to achieve each task:

1.  Create a directory called "projects" directly inside /home/fparker:

mkdir /home/fparker/projects

2. Change the owner and group of /home/fparker/projects to the fparker user and group:

chown fparker:fparker /home/fparker/projects

3. Create a user account named ljenkins and set "password123" as the password:

useradd ljenkins                # Create the user account

passwd ljenkins password123    # Set the password for the user

After successfully completing these steps, you will have created the "projects" directory inside /home/fparker, changed its owner and group to fparker, created a new user account named ljenkins with the password "password123," and formatted the third drive's partition with the ext4 file system.

Learn more about directory on https://brainly.com/question/29757285

#SPJ2

Since the developer created a helper class with a method that can be called from Visualforce pages, the  method is as a result of a trigger known as option A. Check if Trigger.isExecuting ==true.

A systems developer is known to be one among the type of software developer.

Note that they are known to be the person that is said to be responsible as they help to create and implement applications and programs for the backend processing systems that is said to be often used in regards to  businesses and organizations.

Note that Backend processing systems are said to be a behind-the-scenes aspect  of software and as such, Since the developer created a helper class with a method that can be called from Visualforce pages, the  method is as a result of a trigger known as option A. Check if Trigger.isExecuting ==true.

See full question below

A developer created a helper class with a method that can be called from Visualforce pages, web services, triggers, and of even anonymous code. When the method is called from a trigger, the developer needs to execute logic that should not be executed If the method Is called from anywhere else. How can the developer determine if the code Is executed in a trigger context?

A. Check if Trigger.isExecuting ==true

B. Check if Trigger.newMap !=null.

C. Check if System.executionContext =='Trigger'.

D. Use the executeOnTrigger annotation on the method definition.

Learn more about  developer from

https://brainly.com/question/11352260

#SPJ1

Answer:

triangular ##&((+ hhvbh. hhhb hhv

Answer:

for i in range(1, 6):

   print(("# " * i).rstrip())

Explanation:

You need to print one hashtag, then 2, then 3, and so on. We can use Python's string multiplication to get each line quicker.

String multiplication is an easy way to repeat the same string a certain number of times. It's done by multiplying the string to a number.

For example,

"hello" * 6

>> "hellohellohellohellohellohello"

If we multiply the string "#" by any number, we would get a number of hashtags side by side, without any space. To easily avoid this, we can multiply "# " instead to automatically put a space to the right of each hashtag.

We can use a for loop that goes through range(1, 6) to print out 5 rows.

for i in range(1, 6):

Then, we can print the string "# " multiplied by i.

print("# " * i)

However, this will also put a space at the end of the string, which we do not want to print. Hence, we can use the .rstrip() method to strip the string of any spaces on the right. We will first put the whole string in parentheses, then invoke rstrip on it.

print(("# " * i).rstrip())

Let's put both lines together.

for i in range(1, 6):

   print(("# " * i).rstrip())