what are the differences between tls and ssl? check all that apply.

The error is found at b. *list = new double[n];. The code fragment is trying to dynamically allocate an array of n doubles, but there is an error in how the array is being declared and assigned.

The error is that the variable 'list' is not a pointer, but it's trying to use the 'new' operator to dynamically allocate memory for the array, which is only used for pointer types. To fix this error, we can add a pointer operator (*) before the variable 'list' to make it a pointer. This allows us to use the 'new' operator to dynamically allocate memory for the array. So the correct answer is b. *list = new double[n];

Learn more about code, here https://brainly.com/question/497311

#SPJ4

Answer:

If a specific type of cell called a Reed-Sternberg cell is seen, the lymphoma is classified as Hodgkin's. If the Reed-Sternberg cell is not present, the lymphoma is classified as non-Hodgkin's. Many subtypes of lymphoma exist.

Explanation:

Use the spanning-tree vlan vlan-id root secondary global configuration mode command to create a different root bridge if needed.

With this command, the switch's priority is set to the predetermined value of 28,672. As a result, in the event that the primary root bridge fails, the backup switch will take over as the root bridge. The root bridge is determined by the switch with the lowest priority, or BID (the lower the priority value, the higher the priority). For instance, setting the priority to a lower value than the other switches on the network will guarantee that a certain switch is always the root bridge.

Learn more about network here-

https://brainly.com/question/30188706

#SPJ4

The correct answer is (D) Ambiguity problem for context free grammar. The phrase "We saw her duck" is a paraphrase of the lines "We saw her drop her head" and "We saw the duck that belonged to her,".

An ambiguous grammar is one in which there is more than one derivation tree for a given string w L(G). There are several left- or right-most derivations for a given string produced by that grammar. Grammar that is unclear: A CFG is said to be unclear if more than one LeftMost Derivation Tree (LMDT) or RightMost Derivation Tree exists for the given input text (RMDT). Any CFG that has numerous leftmost derivations from the start symbol for one or more terminal strings is considered ambiguous. Alternatively, different rightmost derivations or different parse trees.

To learn more about Ambiguity click the link below:

brainly.com/question/15222669

#SPJ4

To fix this issue, the user needs to update the project's build.gradle file and replace the deprecated features with the new recommended ones.

Here are some steps the user can follow:

The error message "deprecated gradle features were used in this build, making it incompatible with gradle 8.0" occurs when a user is trying to build a project using an older version of the Gradle build tool, and the project contains features or configurations that have been deprecated (removed or replaced) in the latest version of Gradle.

Gradle is a powerful build tool that is commonly used in Java and Android development. It allows developers to automate the process of building, testing, and deploying their projects.

Learn more about fix problem, here brainly.com/question/20371101

#SPJ4

The correct answer is a. PaaS Database-as-a-service solution is an example.As its name implies, PaaS (Platform as a Service) gives you access to computing platforms, which generally contain an operating system.

We've still left out one more phrase: "database as a service" (DBaaS). Usually, it refers to databases that are SaaS or PaaS-offered. DBaaS solutions are now available on all major cloud platforms. Some of these are somewhat more like SaaS, while others are somewhat more like PaaS. The majority of database administration tasks, such as updating, patching, backups, and monitoring, are handled by the fully managed platform as a service (PaaS) database engine known as Azure SQL Database without the need for human intervention. PaaS is often used in instances like AWS Elastic Beanstalk. Microsoft Azure Heroku.

To learn more about PaaS click the link below:

brainly.com/question/20600180

#SPJ4

When Automatic Private IP Addressing (APIPA) is used, the following IP configuration parameters are set:

The following parameters are not set:

APIPA is used as a fallback mechanism when a DHCP server is not available on the network. It allows hosts on the network to automatically self-configure their IP addresses and subnet masks, so they can communicate with each other.

However APIPA does not provide a default gateway or DNS server IP addresses, which limits the hosts' connectivity to the local network only.

To learn more about APIPA, use the link below:

brainly.com/question/28580974

#SPJ4

The right response is MICR. Banks utilise magnetic ink character readers to verify the check (MICR).

That procedure was automated by the MICR line. The information magnetically written on the checks, including the routing number, account number, and check number, is processed by a scanner, also known as a reader-sorter computerised device. Magnetic Ink Character Recognition is referred to as MICR. It is a method for character recognition that can decipher characters produced with specialised magnetic ink that are unintelligible to humans. It is mostly employed in banks to speed up the processing of checks. OCR is a type of scanner that reads text-based documents. Character scanning technique called MICR makes use of magnetic ink and unique characters. 2. It is capable of scanning any printed text. It has the ability to scan the unique data on checks.

To learn more about MICR click the link below:

brainly.com/question/4415602

#SPJ4

Because bugs have the potential to cause long-term damage and because most software can really contain a wide range of problems, depending on the programmers' skill, the only reasonable response is B.

The best approach is to observe and test. Test each application function, run tests on the software, test the software on actual devices to better understand any potential issues end users might encounter, and check the software in various test environments. In short, test, observe, and if necessary, fix. A software bug is a mistake, flaw, or fault in the conception, creation, or usage of computer software that results in inaccurate or unexpected outcomes or leads it to act in ways that weren't intended.

To learn more about bugs click the link below:

brainly.com/question/9916389

#SPJ4

The minimum number of hard disks required to configure RAID 5 is three.

RAID 5 requires at least three hard disks for its implementation. RAID 5 uses striping and distributed parity. Striping is the process of writing data across multiple disks, while parity is used to provide redundancy in the event of a single disk failure.

In RAID 5, parity is distributed across all disks, and the data is striped across all disks in the array, with one disk dedicated to parity. The parity data is used to reconstruct data in the event of a failure, allowing the system to remain operational.

This allows RAID 5 to provide increased capacity and improved performance, while still providing a level of redundancy in the event of a disk failure.

For more questions like RAID 5 click the link below:

https://brainly.com/question/13025768

#SPJ4

Answer:

x >= y

Explanation:

A greedy method cannot solve optimization issues (Dijkstra's Algorithm) with negative graph edges.

a method for creating a Minimum Spanning Tree from a connected weighted graph. This algorithm is greedy. Putting the lightest weight edge that doesn't generate a cycle in the MST is the greedy decision.

Simple, instinctive algorithms called greedy algorithms are employed to solve optimization (either maximised or minimised) problems. The goal of this algorithm is to discover the best solution to the entire problem by making the best decision at each stage.

To know more algorithm visit:-

https://brainly.com/question/22984934

#SPJ4

Use the Windows USB/DVD Download Tool to copy the installation files to a USB flash drive.

First, you must boot from installation media and choose the Custom option in Setup. Second, you must install Windows 10 on a separate disk partition or physical drive; if you choose the same partition that contains an existing Windows version, you will lose access to that Windows installation.

To create a Windows 10 bootable USB, download the Media Creation Tool. Then run the tool and select Create installation for another PC. Finally, select USB flash drive and wait for the installer to finish.

To learn more about USB/DVD please click on below link.

https://brainly.com/question/4170730

#SPJ4

1. A digital collage is a collection of digital images, graphics, and other visual elements that are combined and arranged to create a new, composite image.

2. Digital collages can be created using a variety of digital media, including digital photos, vector graphics, 3D models, and video clips. Common software used to create digital collages include Adobe Photoshop, Adobe Illustrator, GIMP, Procreate, and other digital art software.

3. Some important elements to learn about when creating digital collages include composition, color theory, image manipulation and editing techniques, layering, and masking. Additionally, understanding how to use the tools and features of your chosen software, such as selection tools, layer masks, and blending modes, will also be important.

A firewall is a security device computing appliance blocks and filters unwanted network traffic.

A firewall is a network security device that monitors and filters incoming and outgoing network traffic depending on previously set security policies in an organization. A firewall, at its most basic, is a barrier that lies between a private internal network and the public Internet. A firewall is a security device, either computer software or hardware, that may help safeguard your whole network by filtering traffic and preventing unauthorized users from accessing confidential data on your computer or network.

The volume of data that passes through a network at any particular moment is referred to as network traffic. Network traffic is often known as data traffic or just traffic. Traffic to a network can be optimized in search engine optimization.

To learn more about Firewall to refer:

brainly.com/question/13098598

#SPJ4

Here are the steps to use Diskpart to fix the issue:

This error message occurs when attempting to delete a partition that has the "protected" attribute set, which prevents it from being deleted without the use of the "force protected" parameter. To fix this issue, you can use the Diskpart command-line tool to clear the "protected" attribute from the partition, and then delete it.

Learn more about fix problem, here https://brainly.com/question/20371101

#SPJ4

To troubleshoot physical connectivity issues in this scenario, you need to do the following: Make sure the power cord is plugged in correctly and there are no loose connections.

If completing these steps does not resolve the issue, we recommend contacting your reseller for assistance as the issue may be hardware related

Learn more about troubleshooting physical connectivity here: https://brainly.com/question/13023289

#SPJ4

To fix the issue of "messages not being fully downloaded on an iPhone," try these steps:

If the problem persists, try signing out of iCloud and signing back in again. If the problem still persists, you may consider contacting apple support for further assistance.

Learn more about fix problem, here https://brainly.com/question/20371101

#SPJ4

Break will simply end the loop and exit it, not iterating further or running the code, whereas continue will resume regular operation after stopping the block's execution and iterating.

As an illustration: for I in range(10):

print(i)

if I > 5, then break print (i)

The code will terminate at i==6.

The result will resemble this:

>> 0

>> 0

>> 1

>> 1

>> 2

>> 2

>> 3

>> 3

>> 4

>> 4

>> 5

>> 5

print for I in range(10) (i)

If I > 5, keep printing (i)

The aforementioned code will only print I for values between 0 and 5. But until that continues, the malware will run.

Output:

>> 0

>> 0

>> 1

>> 1

>> 2

>> 2

>> 3

>> 3

>> 4

>> 4

>> 5

>> 5

>> 6

>> 7

>> 8

>> 9

Learn more about malware here:

https://brainly.com/question/29786853

#SPJ4

operational resilience: The AWS Cloud is designed to be highly available and scalable, which can help organizations improve their operational resilience and reduce the impact of failures or disruptions.

The capacity of systems to withstand, absorb, recover from, or adapt to an unfavourable event that might injure, destroy, or impair their ability to carry out mission-related tasks. Operational resilience is a result that gains from successful operational risk management. 3 To reduce operational interruptions and their repercussions, actions including risk identification and assessment, risk mitigation (including the application of controls), and continuing monitoring are coordinated. Operational resilience makes sure that even in the face of calamity, your company can continue to operate. Creating an end-to-end operational resilience plan helps and improves your organization's capacity to react and adapt quickly to environmental, system, and process changes.

To learn more about operational resilience please click on below link.

brainly.com/question/14313263

#SPJ4

Answer: run ipconfig

Explanation: This gives you all of ip information need

The correct answer is O four data inputs and two select inputs, A four-line multiplexer.

A combinational logic circuit known as a multiplexer (MUX) is used to switch one of several inputs to a single common output line. An many-to-one data selector is a multiplexer. In accordance with the bits on the choose line, a multiplexer chooses one of the several data accessible at its input. A 4-to-1 multiplexer accepts 4 inputs and routes one input—the one you choose—to the output. Selection inputs regulate the choice of input. A 4-to-1 multiplexer consists of a 2-to-4 decoder and 4X2 AND-OR. But this multiplexer only outputs one 8-bit bus after accepting four 8-bit bus inputs.

To learn more about multiplexer click the link below:

brainly.com/question/15052768

#SPJ4

By potentially misinterpreting any one of the input digits (from 0 to 9), a system reconstructs an integer that is entered into it.

For instance, if the input is 11891 and the digit 1 is mistakenly read as 9, the algorithm will reconstruct it as 99899.

import java.util.Scanner;

class Digit_1{

public static void main(){

Scanner sc= new Scanner(System.in);

System.out.print(“\n Enter the number :”);

int n= sc.nextInt();

int m =n, c=0, k=0;

while(n>0){

k=n%10;

if(k==1){

c++;

}

n=n/10;

}

System.out.print(“\n The total number of 1’s present = “+c);

}

}

Learn more about system here-

https://brainly.com/question/30146762

#SPJ4

(1) Requires each Executive department and agency to evaluate the credit worthiness of an individual.

(2) Mandates the use of a Government sponsored travel card for costs associated with official Government travel.

(5) Establishes command, supervisory, and personal responsibilities for use of the GTCC and the operation of the DoD travel card program.

(4) States that the applicant understand the provisions of the travel card program and proper use of the travel card.

Based on the data, the prediction that Barton should expect to happen is A1 attracts C2.

Magnets have two poles, namely the north pole and the south pole. When magnetic poles of the same kind are brought close to each other, the two poles will repel each other. Conversely, different poles will attract each other. The magnetic field will form a magnetic force.

Label 1 is likened to the north pole and label 2 is likened to the south pole so that the two attract each other. So if A1 is written with C2 then they will attract each other. If B2 is brought close to C2, they will repel each other.

So, the proper conclusion from Barton's experiment is that A1 attracts C2.

Complete question:

Barton conducts an experiment using three metallic bars that might be magnets. The bars are labeled A, B, and C. The ends of each bar are numbered 1 or 2.

1A2 | 1B2 | 1C2

He places the end of one bar close to an end of a second bar and records his results in the table shown.

Based on the data, which prediction should he expect to occur?

A) A2 repels B1.

B) C2 attracts B2.

C) B1 repels C1.

D) A1 attracts C2.

The correct answer is D.

Learn more about polar magnetic properties at https://brainly.com/question/15310905

#SPJ4

Answer:

Logic and creativity

Explanation:

Joanna can use a tool like John the Ripper to crack the passwords stored as MD5 hashes. John the Ripper is an offline password cracker that tries to find passwords from captured files without having to interact with the target.

It includes built-in brute-force tools and dictionary attacks to make cracking passwords faster and more efficient.

Additionally, John the Ripper can also be used to strengthen passwords by making them more complex and difficult to crack. It can do this by recommending the use of longer passwords consisting of a combination of numbers, letters, and symbols, as well as suggesting the use of multiple passwords for different accounts.

Learn more about retrieves a password file:

https://brainly.com/question/29413262

#SPJ4

Now that we have the key re can reconfigure the xor function to xor together the ciphertext and the key to produce the flag with "xor(b64edCiphertext. The CTF challenges are arranged in order of increasing complexity, and you can attempt them in any order. h> void encryptDecrypt (char inpString []) { char xorKey = 'P'; int len = strlen(inpString); for (int i = 0; i < len; i++) {. XOR has a property - if a = b ^ c then b = a ^ c, hence the. Simply use the command line or right click and select 7zip -> Extract here. Take the first bit ( 0 or 1) of the plain text and the first bit of the key and multiply then using XOR operation to get the ciphered bit. A XOR cipher can have keys ranging from a single bit to the length (aka no. The keystream is generated by encrypting the IV/counter, and then the keystream is XOR'd with the plaintext or ciphertext. The highest frequency letter is e. In order to work out the block size of the XOR key, we need to: Split the cipherblock into n-length. One trick I like to use is 7zip's ability to unzip files when the header is in the incorrect place. XOR, XORtool · Курс молодого CTF бойца v 1

Example challenge: Another Xor, Crypto 100 at CSAW 2017 CTF. If you’ve never used it before, xortool is great at analyzing multi-byte xor ciphers. XOR Encryption is an encryption method used to encrypt data and is hard to crack by brute-force method, i. """Returns the result of each byte being XOR'd with a single value. Decrypt ciphertext with repeating xori ct = '7d2e03292f3370267435262277363b2c2328233c3b2f33

https://brainly.com/question/30224790

#SPJ4

The program serves as an example of a loop, which is used for repetitive tasks.

In computer programming, the word "computer code" refers to a set of instructions or a set of rules that are defined in a particular programming language.(i.e., the source code). It is also the name given to the source code following preparation for computer execution by a compiler (i.e., the object code).

import java.util.*;

public class Main{

public static void main(String[] args) {

//This creates a Scanner object

Scanner input = new Scanner(System.in);

//This declares temperature as integer

int temp;

/This requests input from the user.

System.out.print("Starting Taffy Timer...\nEnter the temperature: ");

/This collects the user's input.

temp = input.nextInt();

/Until the user enters at least 270 characters, the following iteration is repeated.

while(temp<270){

  //This prompts the user for another input

 System.out.print("The mixture isn't ready yet.\nEnter the temperature:");

/The user is asked for another input in this.

    temp = input.nextInt();

}

//This is printed, when the user enters at least 270

System.out.print("Your taffy is ready for the next step!");

}

}

To know more about program visit:-

https://brainly.com/question/11023419

#SPJ4

Answer:

cpp: 'An established connection was aborted by the software in your host machine. This error appeared to be the Systinet web service timing out the connection from the . NET web service application. To correct the issue, the 'hts:rwtimeout' setting in the wsiconfig utility from 30 seconds to 3 minutes