What do Nitrogen, Oxygen, and Fluorine have in common, with regards to their electronegativity and position in the periodic table

Answers

Answer 1

The elements that are nitrogen, oxygen and fluorine all of them exist as diatomic gases at room temperature.

There are total seven diatomic elements that are written as follows: hydrogen (H), nitrogen (N), oxygen (O), fluorine (F), chlorine (Cl), bromine (Br), and iodine (I). The formation of diatomic gases is done by making up two atoms of the same gas. For example, the formula for nitrogen gas is N2, the formula for oxygen gas is O2 and the formula for Fluorine gas is F2. The word diatomic has other synonym which is known as heteronuclear. The position of all these three elements in the periodic table is different so their electronegativities, the only common factor is that they exist as a gas.

To learn more about diatomic gas check the link below:
https://brainly.com/question/670850

#SPJ4


Related Questions

if elements have the same number of valence electrons, they are

a) called halogens
b) called noble gases
c) in the same group
d) in the same period

Answers

Answer:

c

Explanation:

valence is the number of electrons in the outer most she'll.. therefore all elements in the same group have the same valences for example group one elements have a valence of one

I hope this helps

7.92g of FeSO4 • 6H2O is equal to how many molecules?

Answers

7.92g of FeSO4 • 6H2O is equal to 1.55 x 10^23 molecules.

What is molecules?

Molecules are the smallest units of matter that can exist by themselves. They are composed of two or more atoms that are held together by chemical bonds. Molecules can be found in the air we breathe, the water we drink, and the food we eat. They can also be found in living organisms, like plants and animals. Molecules can be made of a variety of different atoms, such as oxygen, carbon, nitrogen, and hydrogen. They also come in different shapes and sizes, depending on the types of atoms they are composed of.

To learn more about molecules

https://brainly.com/question/26044300

#SPJ1

Which component of the periodic table is needed to determine why KCl tastes like NaCl? A. Group B. Period C. Atomic Weight D. Atomic Number

Answers

Atomic Number of the periodic table is needed to determine why KCl tastes like NaCl.

What is the Periodic Table?

The Periodic Table is a tabular arrangement of the chemical elements organized by atomic number, electron configuration, and recurring chemical properties. It is one of the most important tools in chemistry, providing a useful framework to classify, systematize, and predict the properties of elements.

Atomic numbers are used to identify each element in the periodic table, and they are also used to determine the number of protons in the nucleus of an atom. The number of protons in an atom determines its chemical properties, and the similarity in the number of protons between two elements can explain why they have similar properties. In this case, the similarity in the atomic number of potassium (K, atomic number 19) and sodium (Na, atomic number 11) explains why the salts of both elements, potassium chloride (KCl) and sodium chloride (NaCl), taste the same.

Hence, Option D is correct.

To know more about the Periodic Table,

https://brainly.com/question/15987580

#SPJ4

A 13.1-g sample of ice at −17.9°C is mixed with 103.5 g of water at 73.0°C. Calculate the final temperature of the mixture assuming no heat loss to the surroundings. The heat capacities of H2O(s) and H2O(l) are 2.03 and 4.18 J/g·°C, respectively, and the enthalpy of fusion for ice is 6.02 kJ/mol.

Answers

The final temperature of the mixture when no heat loss to the surroundings is equal to 69.57 °C

What is the specific heat capacity?

The specific heat capacity can be defined as the amount of heat required to increase the temperature in 1 unit of substance by 1° Celcius.

The specific heat capacity can be expressed in the form of the mentioned formula below:

Q = mSΔT

The specific heat capacity of the water, S = 4.184 J/g°C

The heat lost by water = heat gained by the ice

Heat lost by water = heat gained by the ice + heat increased by the water

m₁S₁ (T₂ - T₁) = m₂L + m₂S₂ (T₂ - T₁)

103.5 × 4.18 × (73- T) = 13.1  × (2.03) + 5 × 4.18 × (T-0)

31582 - 432.63 T = 26.59 + 20.9 T

453.53 T = 31555

T = 69.57 °C

Learn more about specific heat capacity, here:

brainly.com/question/28302909

#SPJ1

What is the first thing you should do following an accident with a chemical?

Answers

Immediately rinse chemicals off with a lot of water.                                  

Different assistance must be used because different chemical accidents might occur in various ways.

Help while inhaling a chemical:                

To provide the person access to fresh air, remove them from the factory or work location. Make sure your company has a plan in place for what to do if a worker becomes unconscious or is unable to move. If the person has inhaled chemicals, administer oxygen from an oxygen tank.

Help if a Chemical touch your skin:  

Immediately rinse chemicals off with lots of water for at least 15 minutes. The more quickly and for a longer period of time you start to pour water over the region, the more damage you will limit. Chemicals that catch fire or absorb quickly through the skin must be washed for a longer time, 30 minutes to 1 hour.

Help if chemical is in eye:        

Right away, rinse the eye or both eyes. Rinse for at least 15 minutes while using a lot of water. If you have an emergency eye wash, activate it while keeping your eyes open with your fingers. If you must use your hands to splash water in your eyes, keep them open while doing so. Seek assistance in keeping them open.

Help if chemical is in mouth:                                                        

Look for the chemical label or any other relevant information. Typically, the label will provide information on "ingestion" in the first aid section. If the person should vomit up the chemical or not is determined there. It is crucial that you heed that counsel. If the chemical is consumed, the label can include an antidote. Give the remedy if you have it.

Learn more about ingestion visit:

brainly.com/question/23164645

#SPJ4

Everyone!

Give a Question/Problem for Hot and Cold Compress Pillow

Thank you!!

Answers

Answer:

are u good at geometry math? their are some questions I didn't understand it PLEASE

3. Magnesium is a metal.
a. Describe the structure and bonding in magnesium.
b. Why can magnesium conduct electricity when solid?
c. Why is magnesium malleable?

Answers

Yes, magnesium is a metallic element and is a member of the alkaline earth metals group.

What is  Magnesium?

Magnesium is a chemical element with the symbol Mg and atomic number 12. It is a silvery-white, highly reactive metal that is essential for many biological processes. Magnesium is the eighth most abundant element in the Earth's crust and the fourth most abundant element in the human body.

It is an important component of many enzymes, proteins, and other molecules. Magnesium is found naturally in many foods, including green vegetables, nuts, and grains. Magnesium plays a role in maintaining normal muscle and nerve function, keeping a healthy immune system, regulating blood sugar levels, and helping to form strong bones.

To learn about more Magnesium.

brainly.com/question/25860912

#SPJ1

List the number of sigma bonds and pi bonds in a double bond. Group of answer choices 2 sigma, 0 pi 1 sigma, 2 pi 1 sigma, 1 pi 2 sigma, 3 pi

Answers

There is one sigma as well as one pi bond in a double bond.

Sigma bonds and pi bonds are the two types of covalent bonds. Sigma bonds are formed when there is an end-to-end overlapping of the atomic orbitals. A pi bond is formed when there is a lateral or a side-by-side overlapping of the atomic orbitals.

The sigma bonds are represented by a "σ" symbol and pi bonds are represented by "π" symbol. One sigma bond is there in a single bond. A double bond contains one sigma as well as one pi bond. A triple bond has one sigma as well as two pi bonds.

--The given question is incomplete, the complete question is

"List the number of sigma bonds and pi bonds in a double bond. Group of answer choices 2 sigma, 0 pi 1 sigma, 2 pi 1 sigma, 1 pi 2 sigma, 3pi, 1pi 1 sigma."--

To know more about sigma bonds here

https://brainly.com/question/13818226

#SPJ4

What element has 4 protons 6 neutrons and 4 electrons

Answers

Answer:

Beryllium is the element that is atomic number 4 on the periodic table.

Answer: Beryllium-10

An extremely efficient enzyme has a ____ KM and a ____ kcat.

Answers

An extremely efficient enzyme has a small KM and a large kcat.

The conversion rate at the lowest substrate concentration is measured in kcat/km. This interpretation is accurate. kcat/Km is a good indicator of an enzyme's effectiveness since it takes into account both the enzyme's maximum rate, kcat, and its affinity for its substrate (Km).The turnover number, or the number of molecules that may be created per second per active site, of an enzyme is provided by the formula k c a t / kM.Because the substrate concentration is almost usually much greater than the Km, in many situations, enzymes are only better when they have a larger kcat. It seems disingenuous to me to use the ratio when this is plainly the case, yet it still happens much too frequently. It could serve as a useful benchmark when compared to enzymes in particular situations.

complete question:An extremely efficient enzyme has a _____ KM and a _____ kcat.

A) small; small

B) small; large

C) large; large

D) large; small

E) kcat and KM do nothing to predict the efficiency of an enzyme

learn more about kcat Refer:brainly.com/question/14818292

#SPJ4

A car has a mass of 2,050 kg and is traveling at 28 meters per second. What is the car's kinetic energy?

Answers

After solving the equation the car's kinetic energy is 783,500 kg m2/s2.

What is kinetic energy?

Kinetic energy is the energy of motion, or the energy associated with an object or system due to its motion. It is a form of energy that can be converted into other forms of energy, such as thermal energy, sound energy, electrical energy, and so on.

The car's kinetic energy is the energy it has due to its motion. Kinetic energy is calculated as KE = 1/2mv2, where m is mass and v is velocity. In this case, the car has a mass of 2,050 kg and is traveling at 28 meters per second. Plugging these values into the equation gives:
KE = 1/2(2050 kg)(28 m/s)2
= 1/2(2050 kg)(784 m2/s2)
= 783500 kg m2/s2
Therefore, the car's kinetic energy is 783,500 kg m2/s2.

To learn more about kinetic energy
https://brainly.com/question/26520543
#SPJ1

Ex: Mg + 2HCl—-> MgCl₂ + H₂ If 4.48L of H₂ gas at STP is
produced in 40 sec, what is the reaction rate in mol/sec?

Answers

Answer:

The reaction rate in mol/sec is 0.005.

Explanation:

To determine the reaction rate in mol/sec, you need to first determine the number of moles of H₂ gas produced in the reaction. The volume of a gas at STP (standard temperature and pressure) is directly proportional to the number of moles of the gas, so you can use the volume of H₂ gas produced to calculate the number of moles.

At STP, 1 mole of a gas occupies a volume of 22.4 L. Therefore, the number of moles of H₂ gas produced in the reaction can be calculated as follows:

moles H₂ = 4.48 L / 22.4 L/mol = 0.2 mol

To determine the reaction rate in mol/sec, you need to divide the number of moles of H₂ gas produced by the time it took for the reaction to occur:

reaction rate (mol/sec) = 0.2 mol / 40 sec = 0.005 mol/sec

So, the reaction rate in mol/sec is 0.005.

A compound with a molecular mass of 56.104 grams is found to be 86% carbon. The rest of the compound is hydrogen. Find its molecular formula. Group of answer choices C3H6 C4H8 C2H4 C6H10

Answers

The molecular formula for this compound is C4H8 that can be calculated from its empirical formula.

The empirical formula of a chemical compound is the simplest whole number ratio of atoms present in a compound. The compound is made up of only carbon and hydrogen atoms thus it is known as hydrocarbon. The percentage of carbon is 86%, therefore the percentage of hydrogen is 14%.

The molecular mass of the compound is given i.e., 56.104 grams.

Moles of C= 86 g * 1 mol/12 g =7 moles

Moles of H=14 g* 1 mol/1 g= 14 moles

Thus, the mole ratio of C:H can be given as:

Moles of C/ Moles of H= 7/14=1/2

Thus, the empirical formula is CH2 while its molecular formula is C4H8.

To learn more about molecular formula check the link below:

https://brainly.com/question/26388921

#SPJ4

What happens to the molecules in the room as they change from a liquid to a gas?

Answers

When a liquid changes to a gas, the molecules in the room gain enough energy to break the bonds that hold them together in the liquid state.

What are Molecules?

Molecules are the smallest unit of matter that still has the properties of a particular substance. They are made up of two or more atoms that are bonded together. Molecules can be covalent, meaning the atoms in the molecule share electrons, or ionic, meaning one atom has donated electrons to the other.

This energy comes from an increase in temperature, which causes the molecules to move faster and farther apart. As the molecules move around and expand, they fill the room with a vapor or gas.

To know more about molecules,

https://brainly.com/question/26044300

#SPJ4

Which type of Electromagnetic wave has wavelength similar to the size of a 1 Peso coin

Answers

The microwave wavelength is the same as a one peso coin.

As you know, a peso coin is 24 mm in diameter. So the question becomes, what does an electromagnetic wave with a wavelength of 24mm look like? Wave velocity v, frequency f, and wavelength λ are related to each other. v=fλ

The velocity v in vacuum is the speed of light C₀ = 299792458 m/s. Therefore, the frequency is.

f=[tex]\frac{299792458m/s}{0,024m}[/tex] = 12.5GHz

This is commonly called microwave and its frequency is called Ku band. It is commonly used in satellite communications.

Learn more about microwave visit:

brainly.com/question/13589613

#SPJ4

Predict the ideal bond angles in GeCl4 using the molecular shape given by the VSEPR theory
>120°
109.5°
120°
<120°
>109.5°
90°
< 109.5°
180°

Answers

Predict the ideal bond angles in GeCl4 using the molecular shape given by the VSEPR theory is 109.5°.

Germanium tetrachloride has an odd, acidic smell and is a colorless, fuming liquid. It is a necessary step in the creation of pure germanium metal. GeCl4 has seen a significant rise in utilization recently as a result of its employment as a reagent in the creation of fiber optics. GeO2 (germanium dioxide) may be immediately converted into germanium tetrachloride by dissolving the oxide in strong hydrochloric acid. To purify and remove the germanium tetrachloride from other products and contaminants, the resultant liquid is fractionally distilled. Rehydrolyzing the GeCl4 with deionized water will yield pure GeO2, which may then be reduced with hydrogen to get germanium metal.

complete question:Predict the ideal bond angles in GeCl4 using the molecular shape given by the VSEPR theory

109.5°

90°

120°

180°

< 109.5°

>109.5°

<120°

>120°

learn more about Germanium Refer:brainly.com/question/23745589

#SPJ4

Photosynthesis Notes

1. Give the Greek root word meaning for photoautotroph.

2. What was von Helmont testing with his willow tree experiment? What was the result?

3. Define the law of conservation of mass.

4.

Describe the experiment used by Joseph Priestly to discover oxygen.

5. List the primary constituents of air.

a.

b.

C.

d.

e.

6. What did Jan Ingenhousz discover about plants?

7. Based on the work of Nicolas de Saussure, what are the two primary sources of mass for

plants?

8. Define photosynthesis-

9. Define potential energy-

Answers

Photoautotroph has been derived from the combination of three words, photo -meaning "light", autos- meaning "self", and troph meaning "nutrition".

Land plants and photosynthetic algae are both photoautotrophs. These species contain pigments that can capture light, like chlorophyll. Origin of the word: photo- (light) + auto (self) + troph (nourishment). Autotrophs known as photoautotrophs generate complex chemical substances like proteins, lipids, and carbohydrates by absorbing light. Photosynthesis is the name given to this light-mediated process.

An energy-rich carbohydrate like glucose is produced by plants using carbon dioxide, inorganic salts, and water during a process called photosynthesis. As a byproduct, oxygen is also produced, other than glucose. Land plants and photosynthetic algae are both photoautotrophs. These species contain pigments that can capture light, like chlorophyll.

To know more about autotrophs, refer to the following link:

https://brainly.com/question/28623341

#SPJ4

Between what is expected and what actually happens?

Answers

Irony is a mismatch between what is expected and what actually occurs. These literary methods aid in the creation of dramatic effects in writing.

What is Irony?

Irony is a disconnect between what is expected to happen and what actually happens. These types of literary devices help in creating a dramatic effect in literature.

Irony is a literary device which was used extensively in Greek tragedy. It involves expressing the meaning of something by making use of words which technically mean the opposite of the original thing being conveyed.

Irony is used for a dramatic or humorous effect.  There are three types of irony seen in literature as follows:

• Verbal Irony  

• Situational Irony  

• Dramatic Irony  

Verbal irony involves the usage of different words to mean something dissimilar to what they look like they actually mean.  

Situational Irony means that what happens is totally different from what was expected to be happening.

Dramatic Irony occurs in plays, etc. where the audience or the readers are more aware of what is actually going on as compared to the character in the scene.

Learn more about irony here:

https://brainly.com/question/13428382

#SPJ4

What is the freezing point of the solution after you add an additional 1. 34 g (Use i = 2. 5 for MgCl2)

Answers

The freezing point of the solution after you add an additional 1.34 g is -0.808°C.

What is freezing point of a solution?

A solution's freezing point is lower than the pure solvent's freezing point. This means that for freezing to happen, a solution needs to be cooled to a lower temperature than the pure solvent.

We use the equation: to determine the mass of the solution

Density = mass/volume

1.05 g/ml = mass/ 50ml

mass = 1.05×50

mass = 52.5g.

Percentage of magnesium chloride in the solution is 1.52%

Mass of magnesium chloride in the solution = 1.52 % of 52.5 g

Mass of magnesium chloride in the solution = 1.52/100×52.5

Mass of magnesium chloride in the solution = 0.798g

The following equation is used to determine depression in freezing point:

ΔTf = Freezing point of pure solution - Freezing point of solution

ΔTf = i Kf m

Freezing point of pure solution - Freezing point of solution = i Kf m

m =  m solute × 100/M solute × W solvent

Given values,

Freezing point of pure solution (water) is 0°C

i is Vant hoff factor = 2.5

Kf molal freezing point elevation constant = 1.86°C/m

m solute given mass of solute (magnesium chloride) = [0.798 + 1.34] g

m solute = 2.138 g

M solute molar mass of solute (magnesium chloride) = 95.2 g/mol

W solvent mass of solvent (water) = [52.5 - 0.798] g = 51.702 g

substitute the given values,

0 - Freezing point of solution = 1×1.86×2.138×1000/95.2×51.702

Freezing point of solution = -0.808°C.

To know more about freezing point visit:

https://brainly.com/question/14825265

#SPJ4

Complete question is " A 50 mL solution is initially 1.52% MgCl₂ by mass and has a density of 1.05 g/ml

What is the freezing point of the solution after you add an additional 1.34 g MgCl₂? (Use i = 2.5 for MgCl₂)."

What are the 7 are elements?

Answers

The classical elements or seven elements in nature are plants, warm energy, soil, mineral, water, cold energy, and air.

Living organisms incorporate distinctly massive quantities of oxygen, carbon, hydrogen, nitrogen, and sulfur (those 5 factors are called the majority factors), together with sodium, magnesium, potassium, calcium, chlorine, and phosphorus (those six factors are called microminerals). From the smallest atom to a massive whale to the sun machine itself, all matters are stated to be composed of a few aggregate of those elements. Halogens belong to group 17, and they acquire only one electron in order to attain stable electronic configuration.

To learn more about elements check the link below:

https://brainly.com/question/28376204

#SPJ4

Human population growth in 2018 was 1. 7%. If this rate of growth remains constant, in what year will the human population double?

Answers

Human population growth will Double time and that will be 41.17 years

Human growth can be defined as;

The growth and development are positively influenced by factors, like parental health and genetic composition.

Population growth is the increase in the number of humans on Earth.

Human population has grown exponentially over the past century. It has done so largely by producing large amounts of food, and learning how to control disease.

We can find what year the human population would double using the rule of 70. This is given as;

Double time = 70 / rate(r)

Double time = ?

Rate = 1.7%

Inserting into the equation;

Double time = 70 / 1.7

Double time =41.17 years

To look more about population growth click here

brainly.com/question/18415071

#SPJ4

8.0 mol AgNO3 reacts with 5.0 mol Zn in
a single replacement reaction.
2AgNO3 + Zn→ 2Ag + Zn(NO3)2
How many moles of Ag form from 5.0
mol Zn?
[?] mol Ag
Round your answer to the ones place.

Answers

The number of moles of Ag that forms from 5.0 moles of Zn is 10 moles.

How to calculate number of moles?

The number of moles of a substance can be calculated stoichiometrically as follows;

Stoichiometry is the study and calculation of quantitative (measurable) relationships of the reactants and products in chemical reactions (chemical equations).

According to this question, silver nitrate reacts with zinc to produce silver and zinc nitrate as follows:

2AgNO₃ + Zn → 2Ag + Zn(NO₃)₂

Based on the equation above, 1 mole of Zn produces 2 moles of silver.

Hence, 5 moles of Zn will produce 10 moles of Ag.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

A beautyberry is a type of shrub that grows well in the southern United States. Some students have a small beautyberry shrub that is growing near their school. They record the number of berries, ripe or unripe, and the number of flowers at different times throughout the year.

Table. Column headings. Month, ripe berries, unripe berries, flowers. September, 9, 4, 2. October, 5, 10, 4. November, 5, 7, 3. December, 2, 3, 1. February, 3, 2, 0. March, 6, 11, 5. April, 12, 5, flowers 9. June, 3, 8, 2.

Which statement best explains what is shown in their data?

Choose the correct answer.

Responses
A.The beautyberry relies on wind to spread its seeds.
B..The beautyberry relies on one type of animal to eat the berries.
C.The beautyberry uses asexual reproduction to make new plants.
D.The beautyberry increases its chances of reproduction because its berries do not all become ripe at the same time.

Answers

Note that statement best explains what is shown in the above-tabularized data is: "The beautyberry increases its chances of reproduction because its berries do not all become ripe at the same time. (Option D)

What is the rationale for the above answer?

The statistics in the above table appear to reflect the ripening of berries and the number of blossoms of a plant, presumably called beautyberry. It can be noticed that the amount of ripe berries and blossoms varies each month.

This implies that the beautyberry does not produce all of its berries at once, but rather over the course of several months. This might boost the odds of reproduction by providing a food supply for animals and birds for a longer length of time.

Learn more about reproduction:
https://brainly.com/question/7464705
#SPJ1

Problem that can be caued by both the complete and incomplete
combution of methane in a ga fire

Answers

Oxidation of methane to soot:

CH4(g)+O2(g)⟶C(s)+2H2O(g)

Among the hydrocarbons is methane, CH4(g). Only the elements carbon (C) and hydrogen (H) are present in the complex. When methane burns with too much oxygen, it produces water vapor and carbon dioxide gas CO2(g) (g). Complete combustion is defined as combustion with extra oxygen.

Methane can be partially oxidized into a variety of compounds when it is burned inefficiently, including CO, methanol, formic acid, formaldehyde, and higher hydrocarbons.

Carbon monoxide is an extremely toxic gas. It is invisible and odorless. Without anybody being aware of it, malfunctioning gas fireplaces or boilers can poison the air in a room by emitting carbon monoxide.

To know more about combustion click here

https://brainly.com/question/14335621

#SPJ4

The complete question is

Problems that can be caused by both the complete and incomplete

combustion of methane in a gas fire.

A 70g chunk of metal at 180C was dropped in a bucket containing 400g of water at 25C. The final temperature of the mixture was 28C. What is the specific heat capacity of the metal

Answers

Thus, the metal has a mhm specific heat capacity of 2.472 Joel program degrees Celsius.

To calculate the temperature change (T), subtract the end temperature from the initial temperature. Multiply the temperature change by the sample's mass. Share the product's energy and heat output. The equation is C = Q / (T m). The amount of heat energy per unit mass needed to raise the temperature by one degree Celsius is known as the specific heat. The form given below, where c is the specific heat, is typically used to express the relationship between heat and temperature change. Let S represent the water's specific heat capacity. Consequently, the combined temperature of 50g of water at 20°C and 50g of water.

Learn more about temperature here-

https://brainly.com/question/5421090

#SPJ4

Write the chemical symbols for three different atoms or atomic anions with 10 electrons

Answers

Answer:

          i)  Neon (Ne)

           ii)  Fluoride Ion (F⁻¹)

            iii)  Oxide Ion  (O⁻²)

Explanation:

                  Ions are those charged species which are either positively charged (by loosing electrons) called as cations or negatively charged (by gaining electrons) called as anions.

                 In given examples, Neon is a neutral atom which has an atomic number 10. It contains 10 electrons in its neutral state with the electronic configuration 1s², 2s², 2p⁶.

                 Fluorine atom has an atomic number of 9. Therefore, it contains 9 electrons in its neutral state with an electronic configuration of 1s², 2s², 2p⁵. When Fluorine atom gains one electron it gets 10 electrons with electronic configuration of 1s², 2s², 2p⁶.

                Oxygen atom has an atomic number of 8. Therefore, it contains 8 electrons in its neutral state with an electronic configuration of 1s², 2s², 2p⁴. When Oxygen atom gains two electron it gets 10 electrons with electronic configuration of 1s², 2s², 2p⁶ forming an Oxide Ion.

Enzyme ______ bind to an enzyme to turn it off, thus preventing it from catalyzing a reaction. Multiple choice question

Answers

Enzyme Inhibitors bind to an enzyme to turn it off, thus preventing it from catalyzing a reaction.

An enzyme is a biological molecule that catalyzes chemical reactions in the cell. Enzymes work by lowering the activation energy required for a reaction to occur, making it more likely that the reaction will proceed. However, enzymes can also be inhibited, which means that their activity is reduced or stopped completely. This can happen for a variety of reasons, such as the presence of a specific molecule called an inhibitor.

Some inhibitors bind to the active site of the enzyme, preventing the substrate from binding and thus preventing the reaction from occurring. Other inhibitors bind to other parts of the enzyme, causing a conformational change that prevents the enzyme from working. Still, other inhibitors bind to enzymes and alter their activity by non-covalent interactions.

There are different types of inhibitors like competitive inhibitors bind to the active site of an enzyme and prevent substrate binding. Non-competitive inhibitors bind to a different site on the enzyme, causing a conformational change that makes the enzyme less active. Feedback inhibitors bind to the end product of a metabolic pathway, inhibiting the enzyme that catalyzes the first step of the pathway.

To know more about  Enzyme Inhibitors  click below:

https://brainly.com/question/17320375#

#SPJ4

2POCl3(g)---> 2PCl3(g)+O2(g), deltaH_o=572 kJ, delta S_o=179 J/K
At what temperature (if any) would the decomposition of POCl3 become spontaneous?

Answers

At T=3195.53 Kelvin, decomposition of PoCl3 becomes spontaneous.

What is meant by spontaneous?

In chemistry, spontaneous processes is one that occurs without addition of external energy. Spontaneous process can occur quickly or slowly, because spontaneity is not related to the kinetics or reaction rate.

Spontaneous reaction happens in given set of conditions without interruptions whereas the nonspontaneous reaction occurs with the help of external agents like heat or energy.

Given, ∆H=572KJ and ∆S=0.179J/K

According to thermodynamical concept;

As, T=∆H/∆S,

=572/0.179

= 3195.53 Kelvin

We know, change in Gibbs free energy (∆G)=0 ; which shows that reaction is in equilibrium.

Above this temperature the reaction becomes spontaneous and moves in  forward direction.

To know more about spontaneous process, refer

https://brainly.com/question/2855292

#SPJ4

Explain what it means for materials to move down their concentration gradient and up their concentration gradient.

Answers

Moving down the concentration gradient means that materials move from an area of high concentration of the material to an area of low concentration of the material.

What is concentration?

In chemistry, concentration is the amount of a substance in a given space. Another way to describe concentration is the proportion of the solute to a solvent or entire solution. In general, mass/unit volume is used to express concentration. Instead of using volume, concentration can be stated as a mass per unit. Although concentration is typically used to describe chemical solutions, it may be computed for any mixture.

This can be seen in osmosis, where water moves from a higher concentration of solute to a lower concentration of solute.

To learn more about concentration

https://brainly.com/question/26255204

#SPJ4

While massing a hazardous solid on the balance, a lab student finds the amount taken is larger than needed and removes a small portion with a spatula. What is the recommended strategy for dealing with the excess material

Answers

As with any laboratory work, adequate facility design, operation, and monitoring, as well as excellent work practices, are necessary to protect laboratory staff against the hazard.

Both degrees of protection are based on the principle of ALARA (as little as reasonably possible) exposure. Electricity Risks By adopting adequate measures, the electrocution dangers of electrically powered instruments, tools, and other equipment are nearly completely minimized, therefore their use in the hazard need not represent a serious risk. You need the correct sort of scales if you want to weigh laboratory samples accurately. To accurately weigh the lab samples, for instance, you may use an analytical balance. The reliability of the weighing device will determine how accurate and precise the findings are.

To learn more about laboratory please click on below link

https://brainly.com/question/14428286

#SPJ4

Other Questions
A scale model of a building is 16 inches long. The actual building is 62 feet long. In the model, the door is 2.4 inches tall. How tall is the actual door? 1. A student has computed that it takes an average of 17 minutes with a standard deviation of 3 minutes to drive from home, park the car, and walk to an early morning class. Find the proportion of times whose time X satisfies each of the following conditions:A) If you selected 10 days at random, what is the probability that half the days will take between 15 and20 minutes?B) What is the probability the second day selected will be the first day he is late to class, assuming he leftat 8:39am?(I know how to solve for the probabilities on their own, however Im not sure how to incorporate the added probability based on multiple days) What is the only real power a vice president has? Use context clues to determine the meaning of the Lost Generation. Write your best definitionhere, along with the words and phrases that were most helpful in determining the meaning of thephrase. Then, check a search engine to confirm your understanding. What is the median? Help please What is the importance of audio or sound in media forms such as film and television? What do Jim and Della realize at the end of the story? Dennis made an extra 245. 00 do for selling furniture was 7% of the total value of the furniture he sold. What was the total value of the furniture Dennise sold? you are not liable for damage to property next to a street or highway if in a collision. Would the date of the duplicate payments usually be the same or different? According to the interest parity condition, if the domestic interest rate is 12 percent and the foreign interest rate is 10 percent, then the expected ________ of the foreign currency must be ________ percent. depreciation; 4 appreciation; 2 appreciation; 4 depreciation; 2 What are the similarities and differences between genetic engineering and selective breeding? what did the explorers expect the northeest passage to provide? Krause Industries balance sheet at December 31, 2016, is presented below.KRAUSE INDUSTRIESBalance SheetDecember 31, 2016AssetsCurrent AssetsCash $7,500Accounts receivable 73,500Finished goods inventory (1,500 units) 26,050Total current assets 107,050Property, Plant, and EquipmentEquipment $40,430Less: Accumulated depreciation 10,090 30,340Total assets $137,390LSales budget (8,000 units at $32) $76,800 $256,000Direct materials used 13,570 62,500Direct labor 12,500 50,900Manufacturing overhead applied 10,000 49,270Selling and administrative expenses 16,660 75,000To meet sales requirements and to have 2,500 units of finished goods on hand at December 31, 2017, the production budget shows 9,000 required units of output. The total unit cost of production is expected to be $18. Krause uses the first-in, first-out (FIFO) inventory costing method. Interest expense is expected to be $3,500 for the year. Income taxes are expected to be 40% of income before income taxes. In 2017, the company expects to declare and pay an $10,560 cash dividend.The companys cash budget shows an expected cash balance of $5,880 at December 31, 2017. All sales and purchases are on account. It is expected that 60% of quarterly sales are collected in cash within the quarter and the remainder is collected in the following quarter. Direct materials purchased from suppliers are paid 50% in the quarter incurred and the remainder in the following quarter. Purchases in the fourth quarter were the same as the materials used. In 2017, the company expects to purchase additional equipment costing $11,900. $9,437 of depreciation expense on equipment is included in the budget data and split equally between manufacturing overhead and selling and administrative expenses. Krause expects to pay $9,260 on the outstanding notes payable balance plus all interest due and payable to December 31 (included in interest expense $3,500, above). Accounts payable at December 31, 2017, includes amounts due suppliers (see above) plus other accounts payable of $8,250. Unpaid income taxes at December 31 will be $7,860.(a) Prepare a budgeted statement of cost of goods sold.KRAUSE INDUSTRIESBudgeted Cost of Goods SoldFor the Quarter Ending December 31, 2017For the Year Ending December 31, 2017December 31, 2017Cost of Goods ManufacturedManufacturing Overhead AppliedCost of Goods Available For SaleDirect Materials UsedIncome Tax ExpenseNet Income / (Loss)Selling and Administrative ExpensesSalesInterest ExpenseCost of Goods SoldFinished Goods Inventory, 1/1/17Finished Goods Inventory, 12/31/17Direct Labor $Cost of Goods ManufacturedCost of Goods Available For SaleFinished Goods Inventory, 1/1/17Selling and Administrative ExpensesCost of Goods SoldFinished Goods Inventory, 12/31/17Direct Materials UsedDirect LaborManufacturing Overhead AppliedIncome Tax ExpenseInterest ExpenseNet Income / (Loss)SalesCost of Goods Available For Sale Cost of Goods Manufactured Cost of Goods Sold Finished Goods Inventory, 12/31/17 Finished Goods Inventory, 1/1/17 Direct Materials Used Direct Labor Manufacturing Overhead Applied Income Tax Expense Interest Expense Net Income / (Loss) Sales Selling and Administrative Expenses $ Cost of Goods Manufactured Direct Materials Used Net Income / (Loss) Cost of Goods Available For Sale Manufacturing Overhead Applied Cost of Goods Sold Finished Goods Inventory, 12/31/17 Sales Selling and Administrative Expenses Finished Goods Inventory, 1/1/17 Direct Labor Income Tax Expense Interest ExpenseCost of Goods Sold Selling and Administrative Expenses Finished Goods Inventory, 1/1/17 Cost of Goods Available For Sale Finished Goods Inventory, 12/31/17 Direct Labor Direct Materials Used Income Tax Expense Manufacturing Overhead Applied Cost of Goods Manufactured Net Income / (Loss) Interest Expense SalesNet Income / (Loss)Direct Materials UsedDirect LaborManufacturing Overhead AppliedInterest ExpenseIncome Tax ExpenseSalesSelling and Administrative ExpensesCost of Goods SoldCost of Goods Available For SaleCost of Goods ManufacturedFinished Goods Inventory, 12/31/17Finished Goods Inventory, 1/1/17Cost of Goods Available For SaleCost of Goods ManufacturedNet Income / (Loss)SalesSelling and Administrative ExpensesManufacturing Overhead AppliedDirect Materials UsedFinished Goods Inventory, 1/1/17Cost of Goods SoldDirect LaborFinished Goods Inventory, 12/31/17Interest ExpenseIncome Tax ExpenseDirect LaborCost of Goods Available For SaleSelling and Administrative ExpensesNet Income / (Loss)Manufacturing Overhead AppliedCost of Goods SoldFinished Goods Inventory, 1/1/17Interest ExpenseIncome Tax ExpenseSalesDirect Materials UsedCost of Goods ManufacturedFinished Goods Inventory, 12/31/17 $ What should be added to the product of X and 2 to get x * 1 point? What were the ways monarchs tried to increase their power? The setting of The Colomber by Dino Buzzati takes place primarily in __________.the colomberthe seathe forestthe mountain Which type of view would best allow scientist to see the shape of the arm in a spiral galaxy? A. edge-on B. side-diagonal C. face-on D. bottom-up 6. It took Mrs. Whitaker's class 4 hours to build a snowman.They decided to build a second snowman, but this time it tookonly half the time it took to build the first one. What was thetotal amount of time to build both? to the origin is its velocity is and it is subject to a force Find (a) the acceleration of the object, (b) the angular momentum of the object about the origin, (c) the torque about the origin acting on the object, and (d) the angle between the velocity of the object and the force acting on the object.