Answer:
The foil makes the microwave spark it can smoke up and catch fie.
Explanation:
-The aluminum foil's sharp edges are what causes the fire, smoke, and sarks.
- Hope This Helps!
-Justin:)
Answer:
itll spark and catch fire
Explanation:
The kinetic energy of a javelin is 81 J, and its speed is 9.0 m/s. What is its mass?
A. 0.5 kg
B. 1.0 kg
C. 2.0 kg
D. 9.0 kg
Answer:
2 kg
Explanation:
K.E. = 1/2 m v^2
81 = 1/2 m (9^2)
1 = 1/2 m
m = 2 kg
how fast would u have to throw a baseball for it to catch on fire? (explanation in step by step equations)
Explanation:
Multiply the time by the acceleration due to gravity to find the velocity when the object hits the ground. If it takes 9.9 seconds for the object to hit the ground, its velocity is (1.01 s)*(9.8 m/s^2), or 9.9 m/s
Answer:
800 feet per sec.
Explanation:
Converting it over from 105.1mph to ft per sec is only about 154.15fps.
An archer shot a 0.04 kg arrow at a target. The arrow accelerated at 7,000 m/s2 to reach a speed of 60.0 m/s as it left the bow. How much force did the arrow have?
The force at which the arrow moved when an archer shot a 0.04 kg arrow at a target is 280 N.
What is force?Force is the product of mass and acceleration.
To calculate the amount of force the arrow moves, we use the formula below.
Formula:
F = ma............ Equation 1Where:
F = Force m = mass of the arrowa = acceleration of the arrow.From the question,
Given:
m = 0.04 kga = 7000 m/s²Substitute these values into equation 2
F = 0.04×7000F = 280 NHence, the force at which the arrow moved is 280 N.
Learn more about force here: https://brainly.com/question/18762601
Question 1(Multiple Choice Worth 2 points)
(04.05 LC)
The number of protons plus the number of neutrons in an atom is equal to its
O atomic number
O mass number
O nuclear model
O energy level
Question 2 Multiple Choice Worth 2 points)
Answer: Mass Number
Explanation:
Atomic number is the number of just protons;
Nuclear Model is a theoretical description of what an atom looks like;
Energy levels are the energy states that electrons are in;
However, mass number is by definition the number of protons + number of neutrons. :)
If the electric potential in a region is given by v(x)=7/x2 the x component of the electric field in that region is
Hi there!
Recall that:
[tex]\Delta V = -\int\limits^a_b {E \cdot } \, dx[/tex]
Given an electric field, the potential difference can be solved by using integration. Similarly:
[tex]E = -\frac{dV}{dx}[/tex]
We can differentiate the electric potential equation to solve for the electric field.
Use the power rule:
[tex]\frac{dy}{dx} x^n = nx^{n - 1}[/tex]
Differentiate the given equation.
[tex]-\frac{dV}{dx}\frac{7}{x^2} =- \frac{dV}{dx}7x^{-2} = -(-14x^{-3}) = \frac{14}{x^3}[/tex]
Or:
[tex]\boxed{E(x) = \frac{14}{x^3}}[/tex]
The component of the electric field in that region is E = 14/x³ if the electric potential in a region is given by v(x)=7/x2
What is an electric field?An electric field is an electric property that is connected with any location in space where a charge exists in any form. The electric force per unit charge is another term for an electric field.
We have:
The electric potential in a region is given by:
[tex]\rm V(x) = \frac{7}{x^2}[/tex]
We know the relation between potential difference and an electric field is given by:
[tex]\rm \triangle V = \int\limits^a_b {E.} \, dx[/tex]
If the electric field is given, then:
[tex]\rm E = -\frac{dV}{dx}[/tex]
[tex]\rm E = -\frac{d(7x^{-2} )}{dx}[/tex]
After differentiate:
[tex]\rm E = -(-14x^{-3})[/tex] or
[tex]\rm E = \frac{14}{x^3}[/tex]
Thus, the component of the electric field in that region is E = 14/x³ if the electric potential in a region is given by v(x)=7/x2
Learn more about the electric field here:
https://brainly.com/question/26690770
#SPJ4
When using a different calorimeter, and mixing 50 ml of hot water at 65 degrees c with 60 ml of water in the calorimete
The specific heat capacity of the calorimeter used in mixing the water is determined as 21.87 J/g⁰C.
Conseervation of energyThe heat capacity of the calirometer is determined by applying the principle of conservation of energy.
Heat lost by the hot water = Heat gained by the calirometer
[tex]Q _w = Q_c\\\\M_w C_w\Delta \theta _w = M_c C_c\Delta \theta _c[/tex]
where;
M is massmass = density x volume = ρV
Density of water = 1 g/ml
Mass of hot water = 1 x (50) = 50 g
Mass of water in calorimeter = 1 x (60) = 60 g
Equilibrium temperature[tex]\Delta T_c = 5.5\\\\T - 25 = 5.5\\\\T = 30.5 \ ^0C[/tex]
Specific heat capacity of the calirometer[tex]50 \times 4.184 \times (65 - 30.5) = 60 \times C_c \times (30.5 - 25)\\\\7217.4 = 330C_c\\\\C_c = \frac{7217.4}{330} \\\\C_c = 21.87 \ J/g^0C[/tex]
Thus, the specific heat capacity of the calorimeter used in mixing the water is determined as 21.87 J/g⁰C.
The complete question is below
When using a different calorimeter, and mixing 50 ml of hot water at
65 degrees C with 60 ml of water in the calorimeter at 25 degrees C, the temperature of the calorimeter increased by 5.5 degrees C.
a. Calculate the heat capacity of this calorimeter?
Learn more about heat capacity here: https://brainly.com/question/16559442
What are the two conditions for equilibrium of a rigid body? how would this experiment demonstrate their validity?.
Answer:
They're are Conditions .... (L00K D0WN.)
Explanation:
Conditions for equilibrium require that the sum of all external forces acting on the body is zero (first condition of equilibrium), and the sum of all external torques from external forces is zero (second condition of equilibrium). These two conditions must be simultaneously satisfied in equilibrium.
Why does a magnet exert force on another magnet when the two magnets are not in contact?
Answer:
1. Why does a magnet exert force on another magnet when the two magnets are not in contact? The magnetic field from north to south increases when they're closer together, and when they repel the repelling force increases as well. This is all due to the magnetic field.
Correct me if I'm wrong, Hope this helps
Favor(Brainliest)
#Carryonlearning
100 Points!!!
1.) What does the image of an object look like through a convex lens when the object is further from the lens than the focal point?
A. It looks the same as the actual object.
B. It is right side up and larger than the object.
C. It is upside down and larger than the object.
D. It is upside down and smaller than the object.
2.) What happens when light rays reflect?
A. They are partially absorbed.
B. They bounce back.
C. They are all absorbed
D. They pass through an object.
3.) Based on how it refracts light, what would you expect images formed by a concave lens to look like?
A. Smaller
B. The same as the objects that they are images of
C. Magnified
D. Reversed
4.) What happens to light rays when they enter a different medium?
A. They reflect
B. They Bend
C. They Curve
D. They Stop
(1) The image of an object placed further from the lens than the focal point will be upside down and smaller than the object.
(2) When light rays reflect, they bounce back.
(3) Images formed by a concave lens will look magnified.
(4) When light rays enter a different medium, they bend.
1.0 Object placed further from the lens than the focal pointThe image of an object placed further from the lens than the focal point will be diminished and inverted.
Thus, the correct answer will be "upside down and smaller than the object".
2.0 What is reflection of light?The ability of light to bounce back when it strike a hard surface is known as refection.
3.0 Image formed by concave lensA concave lens is diverging lens is usually virtual, erect and magnified.
4.0 Refraction of lightThe change in speed of light when it travels from medium to another medium is known as refraction. Refraction is also, the ability of light to bend around obstacles.
Learn more about reflection and refraction of light here: https://brainly.com/question/1191238
Answer:
It is upside down and larger than the object
They bounce back
Magnified
They bend
Explanation:
Matthew drops a cherry pit out the car window 1.0m above the ground while traveling down the road at 18m/s.
a) How far, horizontally, from the initial dropping point, will the pit hit the ground
b) Draw a picture of the situation.
c) If the car continues to travel at the same speed, where will the car be in
relation to the pit when it lands?
Answer:
ADD ALL THEM AND ANSER WILL BE THERE 19.O
Explanatio
A coin has a mass of 7.0g. It is made of a metal alloy of density 5.6g/cm3. Calculate the volume of the coin.
[tex]\text{Density,}\\\\~~~~~~~~\rho = \dfrac mV\\\\\\\implies V = \dfrac m{\rho}\\\\\\\implies V = \dfrac{7 \times 10^{-3}~ \text{kg}}{\tfrac{5.6 \times 10^{-3}~ \text{kg}}{ 10^{-6} ~\text{m}^3} }\\\\ \\\implies V = \dfrac{7 \times 10^{-3}~ \text{kg}}{5.6 \times 10^{-3} \times 10^6~~ \text{kg}~ \text{m}^{-3}}\\\\\\ \implies V = 1.25 \times 10^{-6}~ \text m^3\\\\\\\implies V =0.00000125~ \text m^3\\\\\text{Hence the volume of the coin is 0.00000125}~ \text m^3[/tex]
A 10-A current is maintained in a simple circuit with atotal resistance of 209 ohm. What net charge passes through any point in a circuit during a 1-minute interval?
Answer:
I = Q / t definition of current I
Q = i t = 10 Coul/sec * 60 sec = 600 Coul
A 10-A current is maintained in a simple circuit with a total resistance of 209 ohms, then the net charge passes through any point in a circuit during a 1-minute interval would be 6000 Coulombs.
What is an electric charge?Charged material experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. You can have a positive or negative electric charge.
Electric current is defined as the charge per unit of time.
The mathematical relation between current and the electric charge
I =Q/T
Let us first convert the time period of minutes into seconds
1 min = 60 seconds
10 min = 10*60 seconds
=600 seconds
Q = I*t
=10*600
=6000 Amperes
Thus, the net charge that passes through any point in a circuit during a 1-minute interval would be 6000 Amperes.
To earn more about an electric charge from here, refer to the link;
brainly.com/question/8163163
#SPJ2
A thundercloud has an electric charge of 48.8 C near the top of the cloud and –41.7 C near the bottom of the cloud. The magnitude of the electric force between these two charges is 7980000 N. What is the average separation between these charges
a/ 1.51 km
b/ 2.53 Km
c/ 1.51 m
d/ 1001 m
Answer: 1.51 km
Explanation:
Coulomb's Law: The electrostatic force between two charge particles Q: and Q2 is directly proportional to product of magnitude of charges and inversely proportional to square of separation distance between them.
Or, [tex]\vec{F}=k \frac{Q_{1} Q_{2}}{r^{2}}[/tex]
Where Q1 and Q2 are magnitude of two charges and r is distance between them:
Given:
Q1 = Charge near top of cloud = 48.8 C
Q2 = Charge near the bottom of cloud = -41.7 C
Force between charge at top and bottom of cloud (i.e. between Q: and Q2) (F) = 7.98 x 10^6N
k = 8.99 x 109Nm^2/C^2
So,
[tex]\begin{aligned}&7.98 \times 10^{6}=\left(8.99 \times 10^{9} \mathrm{Nm}^{2} / \mathrm{C}^{2}\right) \frac{48.8 \mathrm{C} \times 41.7 \mathrm{C}}{\mathrm{r}^{2}} \\&r=\sqrt{\frac{1.8294 \times 10^{13}}{7.98 \times 10^{6}}}=1.514 \times 10^{3} \mathrm{~m}=1.51 \mathrm{~km}\end{aligned}[/tex]
Therefore, the separation between the two charges (r) = 1.51 km
What does it mean for forces to be in equilibrium?.
Explanation:
If the size and direction of the forces on the object are exactly balanced , then there is no net force acting on the object
What is involved when water changes from one phase to the next?
a
thermal energy
b
indirect energy
c
finite energy
d
ideal gas laws
Thermal energy is involved when water changes from one phase to the next. Option A is correct.
What is latent heat ?Latent heat is the heat needed for the phase change . When the temperature remains constant during melting or boiling, the added energy is employed in the phase change process.
The total number of water particles remains constant when water changes states throughout the water cycle.
When water alterations from one phase to the next, thermal energy is involved. Latent heat is the storage of thermal energy.
Hence, option A is correct.
To learn more about the latent heat, refer;
https://brainly.com/question/87248
#SPJ2
Identify the reactions of the citric acid cycle that provide reducing power for the electron‑transport chain
The reactions of the citric acid cycle that provide reducing power for the electron‑transport chain are as follows:
Conversion of isocitrate to α-ketoglutarateConversion of succinate to fumarateConversion of α-ketoglutarate to succinyl-coAWhat is citric acid cycle?Citric acid cycle also known as kreb cycle is a series of biochemical reactions that involves the synthesis of reduced electron carrier and ATP.
The following steps in the citric acid cycle involves the provision of reducing power for the electron‑transport chain:
Conversion of isocitrate to α-ketoglutarate: Isocitrate is converted to α-ketoglutarate as catalyzed by isocitrate dehydrogenase. Conversion of α-ketoglutarate to succinyl-coA: α-ketoglutarate is converted to succinyl-coA as catalyzed by α-ketoglutarate dehydrogenase.Learn more about citric acid cycle: https://brainly.com/question/11459709
The reactions of the citric acid cycle which provide reducing power for the electron‑transport chain are:
Conversion of isocitrate to α-ketoglutarateConversion of α-ketoglutarate to succinyl-coAConversion of succinate to fumarate.Which citric acid cycle, provide reducing power?Citric acid cycle, is the tricarboxylic acid cycle (TCA), which is the combination of chemical reaction. This reaction is necessary to produce the energy in aerobic organisms.
The reactions of the citric acid cycle which provide reducing power for the electron‑transport chain are:
Conversion of isocitrate to α-ketoglutarateConversion of α-ketoglutarate to succinyl-coAConversion of succinate to fumarate.Hence, the option 1,3 and 4 is correct.
Learn more about the citric acid cycle here;
https://brainly.com/question/11238674
#SPJ4
The physical meaning of 220 volts
Answer:
a particular level of electical potential from a power source
the connection between a medium and a mechanical wave
Answer:
The energy of a mechanical wave can travel only through matter. The matter through which the wave travels is called the medium (plural, media). The medium in the water wave pictured above is water, a liquid. But the medium of a mechanical wave can be any state of matter, even a solid.
Explanation:
Brainlest pls if can thank you ! i hope its helped
Helppppp
5) Experimental Design Cavendish's homemade apparatus gave him a calculated
value for the Gravitational Constant of 6.74E-11 Nm²/kg? The accepted value today
(with 200 years more advanced technology) is 6.67E-11 Nm²/kg? What sources of
error might Cavendish have had? How might scientists have improved this
experiment over the years.
Answer:
The apparatus would need to be extremely delicate because of the very small values being measured, the gravitational attraction of two massive objects.
(I) the torsion constant, measuring the deflection of massive objects would be very small and difficult to measure accurately
(II) since all surrounding objects are massive, it is difficult to remove the effect of such objects from forces being measured
(III) to consider a massive object as having all of its mass at its center, the massive object would need to be uniform throughout - any nonuniformity of the object would affect the calculations
(IV) all physical measurements would need to be made with utmost accuracy because of the relatively small distances involved with regard to the extremely small force being measured
(V) today laser measurements would assist in measuring small deflections accurately
When a skydiver falls towards the Earth, the force of gravity from Earth pulls her towards the
Earth and she is obviously accelerating towards the Earth.
Can the reverse (the force of gravity pulls the Earth towards her and the Earth is accelerating
towards her) be true? Explain.
Answer:
yes
true
Explanation:
because earth is rotation
If a runner exerts 457 j of work to make 321 w of power then how long did it take the runner to do the work
The time taken by the runner to do the work is 1.42 seconds.
Given the data in the question;
Work done; [tex]W = 457J[/tex]Power; [tex]P = 321W[/tex]Time elapsed; [tex]t = \ ?[/tex]PowerPower can be simply referred to as the quantity of energy transferred per unit time.
It is expressed as;
[tex]P = \frac{W}{t}[/tex]
Where W is work done and t is time elapsed.
To determine the time it took the runner to do the work, we substitute our given values into the expression above.
[tex]P = \frac{W}{t} \\\\t = \frac{W}{P} \\\\t = \frac{457J}{321W} \\\\t = \frac{457 kgm^2/s^2}{321 kgm^2/s^3}\\\\t = 1.42s[/tex]
Therefore, the time taken by the runner to do the work is 1.42 seconds.
Learn more about Power and Work: https://brainly.com/question/2962104
A crane lifts a 450 kg concrete to the top of a 50 m building in 5 s.
Assuming g= 10 m/s
)
2
a) The potential energy of the concrete.
, calculate;
b) The power developed by the crane
Explanation:
Given : m=600kg h=20 m
Time of operation t=2 min =120 s
Work done in lifting a box W=mgh=600×10×20=120000
Power required P=
t
W
=
120
120000
=1000 watts
Use F = 1/T as your basis:
10. A stroboscope is set to flash every 8.00×10−5s. What is the frequency of the flashes?
The answer is 12,500 Hz but please show your work.
Now
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{T}[/tex]
[tex]\\ \rm\rightarrowtail \nu=\dfrac{1}{8\times 10^{-5}}[/tex]
[tex]\\ \rm\rightarrowtail \nu=0.125(10^5)[/tex]
[tex]\\ \rm\rightarrowtail \nu=12500s^{-1}[/tex]
[tex]\\ \rm\rightarrowtail \nu=12500Hz[/tex]
Pls help with physics.
Question: How does kicking a soccer ball relate to newton's third law?
Thank you!
Answer:
Explanation: “Every action has an equal opposite reaction” is Newton’s third law. So in this situation, kicking the soccer ball is the action and the reaction is it rolling.
Answer:
you push against the ball and the ball pushes back at you
Your force->|<- ball's force
Explanation:
For every action, there is an equal and opposite reaction
The average speed of a car that travels 100 miles in 4 hours is
In most cultures, the difference between the majority viewpoint and the minority viewpoint is that the majority group is made to feel __________ and the minority group is made to feel __________. A. Divergent. . . Normal B. Equal. . . Superior C. Superior. . . Equal D. Normal. . . Divergent Please select the best answer from the choices provided A B C D.
The difference between the majority viewpoint and the minority view is that the majority group is made to feel normal and the minority group is made to feel divergent.
What is the viewpoint?A vantage point or point of view from which something is viewed or assessed is known as the viewpoint The story is narrated from a variety of perspectives, including two major ones and several smaller ones.
Most studies comparing majority versus minority influence argue the author, places a premium on influence in the sense of prevailing. In this context.
There is evidence that majorities have greater public influence than minorities, and that minority impact when it happens, is mostly latent. In the current version,
Hence the difference between the majority viewpoint and the minority view is that the majority group is made to feel normal and the minority group is made to feel divergent.
To learn more about the viewpoint refer to the link;
https://brainly.com/question/1043206
Answer: D
Explanation:
Simplified for you.
By which factor is the sound intensity decreased at 3 meters?
StartFraction 1 over 9 EndFraction.
StartFraction 1 over 3 EndFraction.
StartFraction 1 over 2 EndFraction.
StartFraction 1 over 4 EndFraction.
Distance is the factor that decreased the sound intensity.
Which factor decrease sound intensity?As a sound wave carries its energy through a medium, the intensity of the sound wave decreases with increasing distance from the source.
So we can conclude that distance is the factor that decreased the sound intensity.
Learn more about sound here: https://brainly.com/question/9349349
#SPJ1
By a factor of 1/9, the sound intensity decreased at 3 meters. Option A is correct,
What is the relation between sound intensity and distance?Sound intensity is inverse proportional to the square of the distance.
The intensity of the sound is;
[tex]\rm I = \frac{1}{d^2} \\\\ \rm I = \frac{1}{3^2} \\\\ I=\frac{1}{9}[/tex]
By a factor of 1/9, the sound intensity decreased at 3 meters.
Hence, option A is correct,
To learn more about the sound intensity refer;
https://brainly.com/question/15089336
#SPJ1
Suppose you have a 100 mhz cpu and a a/d converter with an 8 khz sampling rate. Samples of the a/d converter are 32-bits
The sampling rate that's given regarding the CPU will produce a rate of 256kps.
How to calculate the rate?The following can be gotten from the question:
Sampling rate = 8KHx
Number of bits = 32
The data rate will be:
= 32 × 8kbps
= 256kps
In conclusion, the sampling rate that's given regarding the CPU will produce a rate of 256kps.
Learn more about rates on:
https://brainly.com/question/2375289
The sampling rate specified for the CPU will result in a 256kb/s rate.Sampling rate is also known as the sampling frequency.
What is sampling rate?The number of samples per second collected from a continuous signal to create a discrete or digital signal is referred to as sampling rate or sampling frequency.
The given data in the problem is;
Sampling rate= 100 mhz cpu
Number of bits=32
The rate of the data is;
[tex]\rm R = 32 \times 8 kb/ s \\\\ \rm R = 256 kb / s \\\\[/tex]
Hence the sampling rate specified for the CPU will result in a 256kb/s rate.
To learn more about the sampling rate refer to the link;
https://brainly.com/question/18917438
#SPJ4
A 120 N accelerates an object 1. 2 m/s? What is the mass of the object?
Answer:
m = 100 kg
Explanation:
F = ma
120 = m × 1.2
m = 120 ÷ 1.2
m = 100 kg
Martha wants to calculate an object's velocity. What will she need to do?
Answer:
you divide the distance by the time it takes to travel that same distance, then you add your direction to it.