Answers
domain here is infinitely because it can go on forever to the left and to the right
Related Questions
What is DE? Max amount of points.
Answers
Proportionality can be used to find the length of side DE in the triangle by multiplying both sides by EB and dividing both sides by FC. This yields the equation DE = (FC * DF) / EB. Simplifying this equation yields DE = 31.72.
What is meant by parallel lines?EF is parallel to BC and DF, EB, FC are given.
We can use the theorem that states:
Parallel lines have corresponding angles congruent and corresponding sides proportional.
We may use proportionality to get the length of the triangle's side DE. When two ratios are equal, this is referred to as proportionality. In this scenario, we will use the ratios of side DE to side FC and side EB to side DF. Given that side DE is proportional to side FC and side EB is proportionate to side DF, we can construct an equation stating that the ratio of side DE to side FC equals the ratio of side EB to side DF. This equation is written as DE/FC = DF/EB.
We can then solve this equation for side DE by multiplying both sides by EB and dividing both sides by FC.
This yields the equation DE = (FC * DF) / EB.
We can then plug in the given values for FC, DF, and EB to find the length of side DE.
When we do this, we get that DE = (15.4 * 20.6) / 19.3.
Simplifying this equation yields DE = 31.72.
Rounding to the nearest tenth, DE = 31.7. This is the length of side DE in the triangle.
To learn more about parallel lines, visit
brainly.com/question/29762825
#SPJ1
Kerry invited 23 friends to his pool party. They played a game where everyone had to separate into groups. Each group had the same number of children. The game could not be played with all 24 children in one group, and each group had to have more than 2 children.
Which of the following are ways that they could divide into groups?
Answers
Answer:
abeStep-by-step explanation:
yeah hope its was helpful
Answer:
A,C,E
Step-by-step explanation:
group:children
4x6=24 good
12x2=24 but has to have more than 2 children in each group
8x3=24 good
4x9=36 36>24
2x12=24 good
A construction company has 10,992 bags of sand that are to be delivered evenly to 24 job sites. How many bags of sand will each job site receive?
Answers
Using division we know that each job site will receive 458 sand bags.
What is division?Multiplication is the opposite of division.
If 3 groups of 4 add up to 12, then 12 divided into 3 groups of equal size results in 4 in each group.
Creating equal groups or determining how many people are in each group after a fair distribution is the basic objective of division.
So, we know that:
Number of bags: 10992
Bags to be distributed are 24 jobs.
Now, to know the number of bags each job site will receive:
10992/24
458
Therefore, using division we know that each job site will receive 458 sand bags.
Know more about division here:
https://brainly.com/question/25289437
#SPJ1
Which expression is equivalent to StartFraction b Superscript negative 2 Baseline Over a b Superscript negative 3 Baseline EndFraction? Assume a not-equals 0, b not-equals 0.
StartFraction a Over b Superscript 5 Baseline
StartFraction 1 Over a b Superscript 5 Baseline Endfraction
StartFraction a cubed b Over 1 EndFraction
StartFraction b Over a EndFraction
Answers
The expression that is equivalent is b Over a. Option D
What are index forms?Index form of a number can simply be defined as that number written as an exponential expression.
It could also be written as a single number that is raised to another number.
Other names for index forms are scientific notation and standard forms.
From the information given, we have that;
b superscript negative 2 = b^-2ab superscript negative 3 = ab^-3This can be represented as;
b^-2/ab^-3
Take the inverse of the denominator
b^-2 × a^-1 b^3
Now, add the exponents of the like variables
b^-2+3 . a^-1
Add the exponents
b^1.a^-1
Hence, the expression is b/a
Learn more about index forms here:
https://brainly.com/question/15361818
#SPJ1
What are the two main forms of factor analysis Mcq?
Answers
The two different types of factor analysis are confirmatory and exploratory.
A technique for simulating observed variables and their covariance structure in terms of unseen variables is component analysis (i.e., factors). The two different types of factor analysis are confirmatory and exploratory.
A key phase in the scale building process is exploratory factor analysis (EFA), which is a technique to examine the underlying structure of a group of observed variables. Factor extraction is EFA's first stage. We will talk about how principal components analysis and common factor analysis approach variance partitioning differently.
Confirmatory factor analysis (CFA), a technique for confirming a factor structure that has already been developed, will be covered in the seminar's last section. Identification, model fit, and degrees of freedom will be discussed in relation to the three-item, two-item, eight-item, one-factor, and two-factor CFAs. For the EFA and CFA portions of the seminar, respectively, SPSS and R (lavaan) will be used.
To learn more about factor analysis MCQ link is here
brainly.com/question/29627785
#SPJ4
Selected all answers that apply to the table
Please help
Answers
$30 is the price for 12 tickets and A further ticket costs $2.50.Simply expressed, a single unit value is extracted from a specified multiple .
what is unitary method ?The unit technique is a method of problem-solving where you first calculate the value of a single unit, then multiply that value to get the answer. Simply expressed, a single unit value is extracted from a specified multiple using the unit method. The method used to accomplish this might be standardized. a solitary nation. anything has a distinctive component. (Mathematics, Algebra) Its adjoint and opposite are comparable. (Linear Algebra, Academic Analysis, Mathematics of Matrix or Operators)
given
0 - 00
4 - $ 16
$30 is the price for 12 tickets.
A further ticket costs $2.50 as it traverses the source,
To know more about unitary method visit:
https://brainly.com/question/28276953
#SPJ1
The complete question is :- The costs of movie tickets are shown in the table.
Type of Ticket Cost per Ticket
Child $6.50
Adult $8.50
Senior $5.50
Which equations represent the total cost, c, to buy 2 of each type of ticket? Choose all that apply.
c = $6.50 + $8.50 + $5.50
c = (2 × $6.50) + (2 × $8.50) + (2 × $5.50)
c = ($6.50 + $8.50 + $5.50) ÷ 3 × 2
c = 2 × $6.50 × $8.50 × $5.50
c = ($6.50 + $8.50 + $5.50) × 2
Using percent like this question:125000 times 20?
Answers
Explanation:
Subtract the algebraic fractions x/2 - x/8
Answers
Answer:
The answer would be 3x/8.
Step-by-step explanation:
Both fractions would need to have a common denominator, so you could multiply x/2 by 4 on both the top and bottom to get 4x/8.
You could then subtract both the numerators from each other.
4x-x=x
The denominator will stay the same.
X/8.
Two lines in the same plane that never touch are:
a) perpendicular
b) collinear
c) skew
d) parallel
Answers
Answer:
d. parallel
I wish you luck in your assignments.
15 more than twice a number is 37 What is the number?
Answers
Answer: 11
Step-by-step explanation:
Let the number be N.
Let's set up the equation.
2N + 15 = 37
Let's subtract 15 from both sides.
2N = 22
Divide both sides by 2, and you get
N = 11
Final Answer : 11
Write the ratio as a function in simplest form, with whole numbers in the numerator and denominator.
Answers
Answer:
[tex]\frac{9}{8}[/tex]
Step-by-step explanation:
4.5 yr : 4 yr can be expressed in fractional form as
[tex]\frac{4.5}{4}[/tex] ( multiply numerator / denominator by 2 for whole numbers )
= [tex]\frac{9}{8}[/tex] ← in simplest form
What is the value of a base?
Answers
The value of a base refers to the number that is used as the foundation or foundation number in a mathematical system or system of numbers. A base is typically represented by a number that is used to indicate the power or exponent to which it is raised in order to produce a certain value.
The number of base is the number of different digits or symbols that are used in a particular mathematical system or system of numbers. For example, in the decimal (base 10) system, there are 10 different digits (0–9) that are used to represent different values. In the binary (base 2) system, there are only two different digits (0 and 1) that are used to represent different values. The number of the base can also be referred to as the radix of a number system.
Learn more about the base value here: brainly.com/question/30237652
#SPJ4
There is a proportional relationship between the weight and total cost of a bag of lemons. One bag weighs 2.4 pounds and costs $5.28. Another bag weighs 2.7 pounds and costs $5.94.
Describe how you would graph the proportional relationship.
Answers
The required function here is C(x) =2.2x
What are linear equations?Linear equations help in representing the relationship between variables such as x, y, and z, and are expressed in exponents of one degree. In these linear equations, we use algebra, starting from the basics such as the addition and subtraction of algebraic expressions.
Given here: One bag weighs 2.4 pounds and costs $5.28. Another bag weighs 2.7 pounds and costs $5.94.
One bag weighs 2.4 pounds and costs $5.28.
and therefore 1 pound weighing bag will cost = 5.28/2.4
=$2.2
Thus we can construct an equation if there are x pounds then the cost function C(x) =2.2x
Hence, the required function is C(x) =2.2x
Learn more about linear functions here:
https://brainly.com/question/545403
#SPJ1
What is the equation of this line in slope intercept form?
Answers
Answer:
y=x-4
Step-by-step explanation:
y=mx+b
Answer: y=x-4
Step-by-step explanation:
The first step is to see what point runs through the y-axis, so you can get your y-intercept. The line runs through (0, -4), so -4 will be your y-intercept.
To calculate the slope, we can use the formula, y2-y1/x2-x1 to find the slope. We have to take two definite points to solve this. an example of two definite points is (1, -3), and (0,-4). So the change in y would be -4-(-3), which is -1, and for the change in x, 0-1 is -1 (Think of (1,-3) as point one, and (0,-4) as point 2). SO -1/-1 is 1, making the slope 1, making the equation y=x-4
Please help
WILL MARK BRAINLIEST
Answers
Answer:
4
Step-by-step explanation:
(8x-2)+15x+90=180
Combine like terms
23x+88=180
-88 -88
23x=92
÷23 ÷23
X=4
what is 5 times 2 ( just testing)
Answers
Answer: 10
Step-by-step explanation:
5x2 = 10
Answer:
10 lol.....................
4) Lola gets to have 60 minutes of screen time today. So far, she has spent 22 minutes playing games on her phone. She has also spent 26 minutes watching videos online. How many minutes does Lola have left?
Answers
Answer: 12
Step-by-step explanation: 22+26=48
60-48=12. SO she 12 minutes left
Eddie's Tea Shop has caffeinated tea and decaffeinated tea. During the lunchtime rush, the tea shop served 32 teas in all, 25% of which were caffeinated. How many caffeinated teas did the tea shop serve?
Answers
Answer: 8 teas were caffeinated
Step-by-step explanation:
To solve is to turn 25% into a decimal:
This is 25/100 turned into 0.25
*Multiply this by 32
This gives the number 8
*To do this, multiply without the decimal: 25 x 32 = 800
Then place the decimal back 2 places to the left of the last number:
8.00
600 joules of work is used to lift a box from the ground to a height of six meters. how much work would have been done if a lever would have been used with an effort arm of 12 meters and a load arm of 6 meters?
Answers
If a lever was used with an effort arm of 12 meters and a load arm of 6 meters, the work that would have been done would've been (A) 50 J.
What does a lever do?Using a lever makes work simpler and quicker since it only takes a bit of effort to move a heavy load.
The efficiency of the machine goes up when the output force is bigger than the input force - the formula for this is Output Force divided by Input Force.
Eff = ( output force/input force ) x 100 %
The amount of force you get is determined by this equation.
F ( out ) = load x distance moved by the load
The force you put in is calculated using this equation.
F ( input ) = effort x distance moved by the effort
If we had used a lever with an effort arm of 12 meters and a load arm of 6 meters, the work that would have been done could be calculated.
work = ( 600 x 6 ) / ( 12 x 6 )
work = 50 J
Therefore, if a lever was used with an effort arm of 12 meters and a load arm of 6 meters, the work that would have been done would've been (A) 50 J.
Know more about a lever here:
brainly.com/question/416386
#SPJ4
Complete question:
600 joules of work are used to lift a box from the ground to a height of six meters. how much work would have been done if a lever would have been used with an effort arm of 12 meters and a load arm of 6 meters?
a. 50 J
b. 100 J
c. 600 J
d. 72 J
3/5 of the marbles are blue. If there are only yellow and blue marbles, what is the ratio of blue marbles to yellow marbles?
Answers
Answer: 3:2
Step-by-step explanation:
If 3/5 of the marbles are blue, then the last 2/5 will be yellow.
Answer:
Hey there! So as you know, 3 out of 5 marbles are blue, which can be written as 3/5. To find the ratio of blue to yellow marbles, we need to find the number of yellow marbles.
We know that 5 marbles are blue and yellow combined, and 3 of them are blue, so that leaves 5-3 = 2 yellow marbles.
So the ratio of blue marbles to yellow marbles is 3:2, or 3/2. It means that for every 3 blue marbles, there are 2 yellow marbles.
The expression (p^20)(p^-4)^2 is equivalent to p^n . What is the value of n
Answers
Answer: The expression (p^20)(p^-4)^2 is equivalent to p^n, where n is the power of p in the simplified expression.
To simplify the expression, we need to use the rule of exponents which states that when multiplying two powers of the same base, we can add their exponents.
So, (p^20)(p^-4)^2 = p^20 * (p^(-4))^2 = p^20 * p^(-8) = p^(20+(-8)) = p^12
So the value of n is 12.
Step-by-step explanation:
A cake wa cut into 24 piece. 18of the piece were erved at a party. What percentage of piece were NOT erved?
Answers
The percentage of piece of cake not served is 8.33%
Now, According to the question:
Let's know:
What is percentage ?
A percentage is a number or ratio that can be expressed as a fraction of 100. If we have to calculate percent of a number, divide the number by the whole and multiply by 100. Hence, the percentage means, a part per hundred. The word per cent means per 100. It is represented by the symbol “%”.
Given ,
Total number of equal pieces of cake = 24 piece
Number of pieces served at the party =?
So, Number of pieces of cake not served = 20 - 18
Fraction of cake not served =
Number of pieces not served/ Total no. of pieces of cake
Fraction of cake not served = 2/24
Fraction of cake not served = 1/12
Now, In percentage = [tex]\frac{1}{12}[/tex]× 100 = 8.33%
Hence, The percentage of piece of cake not served is 8.33%
Learn more about Percentage at:
https://brainly.com/question/15423393
#SPJ4
Slope -4 intercept -9
Answers
The slope is m and the y-intercept is b in an equation in slope-intercept form (y=mx+b). It is also possible to rewrite some equations so that they take the shape of a slope-intercept diagram.
What is slope and y-intercept?The slope is m and the y-intercept is b in the slope-intercept version of the equation (y=mx+b). We can also change some equations to be written in slope-intercept form.
We concentrate on the two constants (numbers) m and b when applying the slope intercept formula. The y-intercept, or the place where the graph crosses the y-axis, is represented by b, whereas m denotes the slope, or steepness, of the line.
When the slope of the line being studied is known, and the provided point is also the y intercept, the slope intercept formula, y = mx + b, is utilized (0, b). The y value of the y intercept point is represented by b in the equation.
The slope intercept form is:
y = mx + b
where b is the y-intercept and m is the slope.
You only need to enter those into the formula with the information already provided:
y= 4+ 9
To learn more about slope-intercept refer to:
https://brainly.com/question/25722412
#SPJ1
How do you find the number of relations from A to B?
Answers
To find the number of relations from a set A to a set B, you need to consider the number of possible mappings or functions between the elements of set A and set B.
Here are the steps to find the number of relations from A to B:Determine the cardinality (size) of set A, denoted as |A|.Determine the cardinality of set B, denoted as |B|.The number of relations from A to B is given by [tex]|A|^{|B|}[/tex]. This is because each element in set A can be mapped to any element in set B.For example, if set A has 3 elements and set B has 4 elements, then the number of relations from A to B is [tex]3^4[/tex] = 81.
Note that not all possible mappings are necessarily valid relations, for example, a function is a type of relationship that has a unique output for each input, so it's a one-to-one relation, whereas a relation can be one-to-one or one-to-many, and also it's a subset of all possible mappings from A to B.
Read more about Relations:
brainly.com/question/26098895
#SPJ4
Lisa ordered food from a delivery service she tipped the driver $4.80 this was 15% of the total cost of her food how much did her food cost?
Answers
The cost of Lisa food is 32 dollars.
How to find the cost of her food?Lisa ordered food from a delivery service. She tipped the driver $4.80. This was 15% of the total cost of her food. The cost of her food can be calculated as follows:
Therefore,
let
x = cost of her food
Hence,
15% of x = 4.80
15 / 100 × x = 4.80
0.15x = 4.80
divide both sides by 0.15
Hence,
x = 4.80 / 0.15
x = 32 dollars
Therefore,
cost of food = 32 dollars.
learn more on cost here: https://brainly.com/question/24204831
#SPJ1
Find the difference ("subtract") between (x+7) & (3x+4)
Answers
After subtraction (3x+4) - (x+7), the resultant answer is 2x-3.
What is subtraction?One of the four operations used in mathematics, along with addition, multiplication, and division, is subtraction.
Removal of items from a collection is represented by the operation of subtraction.
For instance, in the following image, there are 5 2 peaches, which means that 5 peaches have had 2 removed, leaving a total of 3 peaches.
So, we have:
(x+7) and (3x+4)
We have to subtract as:
(3x+4) - (x+7)
Now, subtract as follows:
(3x+4) - (x+7)
3x+4 - x-7
2x-3
Therefore, after subtraction (3x+4) - (x+7), the resultant answer is 2x-3.
Know more about subtraction here:
https://brainly.com/question/13378503
#SPJ1
Solve each inequality. Show work.
|0.7x + 5| > 6.7
Answers
The inequality can be simplified into a compound inequality:
x > 2.43
x < -16.7
How to solve the inequality?Here we want to solve the following inequality:
|0.7*x + 5| > 6.7
To solve it, we need to isolate the variable x. The first thing we need to do is "break" the absolute value part, then we will get a compound inequality.
0.7*x + 5 > 6.7
0.7*x + 5 < -6.7
Now we can isolate x in both of these inequalities:
0.7*x > 6.7 - 5
0.7*x < -6.7 - 5
0.7*x > 1.7
0.7*x < -11.7
x > 1.7/0.7
x < -11.7/0.7
x > 2.43
x < -16.7
That is the solution of the inequality.
Learn more about inequalities at:
https://brainly.com/question/24372553
#SPJ1
The length of a cell is 2/3 mm. If the area of the cell is 1/12 square mm, what is the width of the cell?
A: 1/2 mm
B: 1/3 mm
C: 1/6mm
D: 1/8 mm
Answers
You can go step by step and multiply each option by 2/3 to see which one equals 1/12 square mm or you can divide 1/12 by 2/3 to get the answer which is 1/8.
For check 2/3 x 1/8 = 1/12
What are the 7 types of system?
Answers
The 7 types of system are-
Physical or abstract systems, open and closed systems, larger system, permanent and temporary, Natural systems, Man-made system.
Define the term system and its types?Physical or abstract systems:
Physical or abstract systems can be static or dynamic in nature. Physical systems are tangible objects. A conceptual or nonphysical abstract system. Conceptualizing actual circumstances is what is meant by the abstract.open and closed systems:
Both open and closed systems interact with their surroundings on a regular basis. The outside is where it gets input from and where it gets output from. A closed system is protected from the effects of the outside world.larger system:
Each system is a component of a larger system, which is divided into subsystems and supersystems. When the emphasis is on production, goal distribution, and sources of profit and income, the business firm is viewed as the system or total system.Permanent and temporary:
A system that is permanent lasts for a period of time that is lengthy in comparison to human activity. A temporary system is one that has a limited lifespan.Natural systems:
Natural systems and systems made by humans. Natural systems are ones created by nature and found in the environment.Deterministic and probabilistic systems: In a deterministic system, every event's outcome can be predicted with absolute certainty.Man-made system:
It's generally accepted that knowing more about a situation or event makes it less uncertain.To know more about the system, here
https://brainly.com/question/12526075
#SPJ4
Databae A contain 40 data item and i made up with equal number value of 0 and 100 and ha a mean of 50. Databae B alo ha a 40 entrie made up equally of value 49 and 51 and alo ha a mean of 50. Which databae will have the maller value for it tandard devation?
Answers
For the given mean and the number of items, the database B has smaller value of the standard deviation compare to database A.
As given in the question,
For data base A:
Number of items = 40
Mean of database A = 50
Values of database A spread between 0 to 100
For data base B:
Number of items = 40
Mean of database B = 50
Values of database B spread between 49 to 51
Standard deviation of data base
= √ (1/40)[ (x₁ - 50)² + (x₂- 50)² + (x₃ - 50)² + ......+ (xₙ - 50)² ]
Here mean and number of items of both the data base is same.
Data base B spread between 49 to 50 only.Data base spread between 0 to 100.Standard deviation of B is smaller than the standard deviation of A.Therefore, the standard deviation of data base B is having smaller value compare to data base A.
The above question is incomplete , the complete question is :
Database A contains 40 data items and is made up with an equal number of the values of 0 and 100 and has a mean of 50. Database B also has 40 entries made up equally of the values 49 and51 and also has a mean of 50. Which database will have the smaller value for its standard deviation?
Learn more about standard deviation here
brainly.com/question/23907081
#SPJ4