What is the limiting reactant in the balloon with 7.5g baking soda and vinegar?

Scientific law is a brief assertion that condenses the findings of several observations and experiments.

Give a general overview of the subject at hand, referencing any pertinent research. Give an explanation of how your experiment might add to earlier discoveries. Shorten the introduction. Try to keep your experiment's specific methodology and data a secret.

Along with tabulating the data and diagramming the process, it also describes how it was done. A science project should demonstrate whether the experiment was effective or not and make suggestions for additional research. A science project summary should make the project easier to understand for others.

The goal of summarization is to condense a large body of text. Either unnecessary or extraneous content has to be removed, or the most important portion of a lengthy paper is to be made immediately obvious.

To learn more Experiment refer to:

https://brainly.com/question/30055326

#SPJ1

Answer: it would be x=7.5 m/s because you put x= 60-0 over 8 and i think dvide

The average atomic mass of neon is derived from the isotopic masses and percentage abundance. The average atomic mass of neon is 20.37 amu.

Isotopes are atoms of same element with different atomic mass numbers. Almost all elements have two or more isotopes but not all of them are stable in nature.

The average atomic mass can be calculated from the isotopic mass and and percentage abundance as follows:

atomic mass = ∑ (isotopic mass × %abundance /100 )

Apply the isotopic mass and abundance of all isotopes given as follows:

atomic mass of neon = (80.75/100 ×19.99 amu) +  (0.25/100 ×20.99 amu)  +  (19/100 × 21.99 amu) = 20.37 amu.

Therefore, the atomic mass of neon is 20.37 amu.

Find more on isotopes:

https://brainly.com/question/21536220

#SPJ1

1. 1st reaction:reactant, 2nd reaction:product.

2. 2 in cl2 means that chlorine is diatonic

3. 2 in front of NaBr shows that there are 2 moles of NaBr

Answer:

Percentage Composition from Formulas. A more complex example is sucrose (table sugar), which is 42.11% carbon, 6.48% hydrogen, and 51.41% oxygen by mass.

Explanation:

Answer: 2.5 moles of Argon, Ar contains 15.055 x 10^23 particles. ✅

Explanation:

To find the number of particles in 2.5 moles of Argon, we can use the Avogadro's number. Avogadro's number is the number of atoms, ions or molecules in one mole of a substance. It is defined as 6.022 x 10^23 particles per mole.

To convert moles to particles, we can multiply the number of moles by Avogadro's number.

2.5 moles x 6.022 x 10^23 particles/mole = 15.055 x 10^23 particles

So, 2.5 moles of Argon, Ar contains 15.055 x 10^23 particles.

21 moles of O2 are needed to react with 12 moles of C2H6.

The balanced chemical equation for the combustion of ethane (C2H6) is:

2C2H6 + 7O2 -> 4CO2 + 6H2O.

From the balanced equation, we can see that for every 2 moles of C2H6 that react, 7 moles of O2 are needed.

Since you have 12 moles of C2H6, the number of moles of O2 needed for the reaction would be:

12 moles C2H6 / 2 moles C2H6/7 moles O2 = 12 moles C2H6 / 2/7 moles O2 = 12*7/2 = 42/2 = 21 moles O2.

Therefore, 21 moles of O2 are needed to react with 12 moles of C2H6.

To learn more problems on moles:

https://brainly.com/question/14357742

#SPJ4

The molecular formula of the compound has been [tex]$\mathrm{H}_2 \mathrm{O}_2$[/tex].

By calculating the moles of the molecule using the empirical formula, the molecular formula of a chemical has been determined.

The moles of the compound has been given by:

[tex]$\text { Moles }=\frac{\text { Mass }}{\text { Molar mass }}$$[/tex]

The moles of hydrogen in [tex]$\mathbf{0 . 4 4} \mathbf{~ g}$[/tex] :

Moles [tex]$=\frac{0.44}{1}$[/tex] Moles = 0.44 mol

The moles of hydrogen in the compound have been 0.44 mol.

The moles of oxygen in 6.92 gram has been:

Moles [tex]$=\frac{6.92}{16}$[/tex]

Moles [tex]$=0.44 \mathrm{~mol}$[/tex]

The moles of oxygen in the compound have been [tex]$\mathbf{0 . 4 4} \mathrm{mol}$[/tex].

The moles have been equivalent to the empirical formula of the compound has been OH.

The mass of the compound has been 34 g/mol.

The mass of the empirical formula has been 17 g.

The formula unit of empirical formula has been:

Formula unit [tex]$=\frac{34}{17}$[/tex]

Formula unit = 2

The molecular formula of the compound has been [tex]$\mathrm{H}_2 \mathrm{O}_2$[/tex].

To learn more about molecular formulas, refer to:

brainly.com/question/1247523

#SPJ4

SF holds ten elections in the central Splunk atam In a tigenal two - tier structure structure, this indicates there are 5 electron pairs annanged. Two are exidl and three of a Fluonne are equatonal.

Each atom in a bond between two atoms will share 1 electron. The electrons taking part in this connection are referred to as the electron bond pairs. Example: All four hydrogen atoms in the methane molecule form a bond link with the central carbon atom.

Bond pairs refer to the shared electron pairs that exist between the bound atoms. Bonding may not involve all of the valence electrons. Lone pair of electrons are defined as electron pairs without a partner in a bond. For instance, there really are seven bond pairings but no lone pair in C2H6 (ethane).

To know more about electron pairs visit:

https://brainly.com/question/19168427

#SPJ4

The triiodide ion, with its I3- Lewis structure, is a linear anion ion with sp3d hybridization, trigonal bipyramidal geometry, and the acquisition of a linear form.

An ion is an atom or group of atoms with just an electric charge. The word for positive-charged ions is cations. Ions which have a negative surface charge are referred to as anion. The body includes ions of several common substances.

A charged molecule or atom is known as an ion. Because there are more electrons than protons in an atom or molecule, it is charged. Depending upon whether the amount of an atom's electrons is more or less than the number or protons in the atom, an atom can develop a positive charged or a negative charge.

To know more about ion visit:
https://brainly.com/question/14982375

#SPJ4

Considering the definition of percent yield, the percent yield for the reaction is 91.84%.

The percent yield is the ratio between the actual yield and the theoretical yield expressed as a percentage.

The percent yield is calculated as:

percent yield= (actual yield÷ percent yield)×100%

where:

In this case, you know:

Replacing in the definition of percent yield:

percent yield= (25.9 g÷ 28.2 g)×100%

Solving:

percent yield= 91.84%

Finally, the percent yield is 91.84%.

Learn more about percent yield:

brainly.com/question/14408642

#SPJ1

Photosynthesis is essential among most life on the planet. Plants, algae, as well as some kinds of bacteria carry out the process by capturing solar energy to create oxygen (O2) as well as chemical energy stored within glucose (a sugar).

Adenosine triphosphate (ATP), the primary energy-storing molecule within living things, transforms solar energy into chemical energy. The chemical energy required to drive further metabolic reactions would then be provided by ATP, which has been carried throughout the chloroplast.

The thylakoid membrane is the site of light-dependent processes. They need light to function, and their overall conversion of water molecules towards oxygen produces ATP molecules through ADP and Pi as well as NADPH molecules out from reduction of NADP+.

To know more about Photosynthesis

https://brainly.com/question/29764662

#SPJ4

The proportion of exams scores between 68 and 73 points is 38.09%.

First, we need to calculate the z-score of both points.

Formula for z-score is:

z-score = (x – mean) / SD

In this case, given that:

Mean = 70

SD = 5

So, for exam score 68 points:

z-score = (68 – 70) / 5

= –2 / 5

= –0.4

And, for exam score 73 points:

z-score = (73 – 70) / 5

= 3 / 5

= 0.6

Thus, the probability:

P (68 < x < 73) = P (–0.4 < z < 0.6)

By using the z-table:

P (–0.4 < z < 0.6)

= (0.5 – 0.3446) + (0.7258 – 0.5)

= 0.3809

= 38.09%

Hence, the proportion of exams scores between 68 and 73 points is 38.09%.

Learn more about z-score at: https://brainly.com/question/15016913

#SPJ4

Answer:

Explanation:
Mass=0.52kg
Gravitational constant g=9.8
Height h=3.4m
Potential Energy(PE)=h*mg
PE=3.4*0.52*9.81
PE=17.344j

Answer:

Covalent bonds are much more common in organic chemistry than ionic bonds. A covalent bond consists of the simultaneous attraction of two nuclei for one or more pairs of electrons. The electrons located between the two nuclei are bonding electrons.

Explanation:

Atom Valence

Oxygen 2

Sulfur 2

Nitrogen 3

Carbon 4

It is a useful ability to be able to rapidly assess whether the atom is the hybridization again for O in OF 2, as the hybridization hypothesis is sometimes perceived as a convoluted and lengthy notion. sp^2

The process chemical hybridization known as sp3 hybridization involves the mixing and recasting of the 1s and 3p electron shells of the same element to create new hybrid orbitals with the same energy, symmetric, and fixed orientation in space. The molecule of methane is one example.

Atomic orbitals are thought to combine to generate freshly hybridized orbitals through the process of hybridization, which then affects the geometry of molecules and their bonding characteristics. Additionally, hybridization expands the valence

To know more about hybridization visit:

https://brainly.com/question/14140731

#SPJ4

Lithium is an alkali metal with the atomic number = 3 and an atomic mass of 6.941 g/mol. All ions of lithium contain three electrons.  

Lithium is a type of medicine known as a mood stabiliser. It's used to treat mood disorders such as: mania (feeling highly excited, overactive or distracted) hypo-mania (similar to mania, but less severe)

At a neuronal level, lithium reduces excitatory (dopamine and glutamate) but increases inhibitory (GABA) neurotransmission; however, these broad effects are underpinned by complex neurotransmitter systems that strive to achieve homeostasis by way of compensatory changes.

To know more about lithium visit

https://brainly.com/question/1439744

#SPJ1

Answer: c (specific heat capacity) = 0.4369243949 J/g *C

Or with Significant digits: 0.44 ( 2 sig digs because of temperature)

Explanation: So this is a simple calorimetry question, so you have to consider this formula, ΔH = -Q  and since Q = mcΔt || Therefore you get this equation ΔH = - (mcΔt). So you want to solve for c, now rearrange. Once you do that, you will end up with c = - (ΔH/ -m · -Δt)

Now Plug in the numbers

Then you will get 0.44!

Hope that helped and remember significant digits! Good luck!

Answer:

Ainsi pour transformer, sous la pression atmosphérique, une masse de 1 kg d'eau pris à 20 °C en vapeur, l'énergie à fournir est égale à l'énergie fournie pour passer de 20 °C à 100 °C à l'état liquide soit 334 kJ puis à celle requise lors de la vaporisation à 100 °C soit 2256 kJ donc au total 2590 kJ.

Explanation:

Yes it is True.

Because Zinc(Zn) is Highly reactive than Hydrogen(H) that is why Zn can easily replace Hydrogen in HCl and form ZnCl2.

The acid - base properties of the salt :'

1) Strong acids and strong base

2) Strong acid , weak base, acid and weak acid

3) Weak acid, strong base , base and the weak acid

4) Weak acid and the weak base

1) A salt consisting of the conjugate base of a strong acid and conjugate acid of a strong base will be neutral since neither will react with water.

2) The salt consisting of the conjugate base of a strong acid and the conjugate acid of a weak base will be acidic since the conjugate acid of a weak acid is acidic.

3) A salt consisting of the conjugate base of a weak acid and the conjugate acid of a strong base will be basic since the conjugate base of a weak acid is basic.

4) A salt consisting of the conjugate base of a weak acid and conjugate acid of a weak base can be either acidic or basic depending on the relative Ka and Kb of the respective ions.

To learn more about conjugate base here

https://brainly.com/question/12883745

#SPJ4

12 atoms of carbon is equal to 12 x 12.011 grams, or 144.132 grams.

The atomic mass of carbon is 12.011 g/mol, which means that one mole of carbon contains 12.011 grams. Therefore, to find the mass of 12 atoms of carbon, we need to multiply 12.011 by 12, which equals to 144.132 grams.

This is because 1 mole of any element is equal to 6.022 x 1023 atoms. To calculate the mass of 12 atoms, we need to divide 12 by 6.022 x 1023, which is equal to 1.99 x 10-23 moles.

Once we have this number, we can multiply it by 12.011 to get the mass of 12 atoms of carbon. This gives us the final answer of 144.132 grams for 12 atoms of carbon.

For more questions like Carbon click the link below:

https://brainly.com/question/28685805

#SPJ4

Pre-industrial villages were more likely to be found close to surface water sources than industrial ones were. is Valid

The growing population is the main cause of the growth in groundwater use. The increased usage of groundwater is a result of both urbanization and pollution. Groundwater cannot be successfully sourced from contaminated rivers, lakes, or springs. Between pre- and post-industrial eras, groundwater use reduced.

Similar issues arise when water is extracted from the ground quicker than it can be replaced. As a result of pumping, groundwater storage volume is falling in several parts of the United States. The main cause of ongoing groundwater pumping is groundwater depletion. The Ogallala Aquifer is the country's biggest aquifer. The High Plains aquifer system, which extends from Texas to South Dakota, supports a portion of eight different states.

Therefore the correct answer is option b ) true .

To learn more about Pre-industrial era refer to :

https://brainly.com/question/6905170

#SPJ4

The chemical name and the chemical formula of compound is menioned as : disulfur heptoxide; S2O7 ,sulfur tetroxide; SO4 , disulfur trioxide; S2O3  , sulfur dioxide ; SO2

Disulfur heptoxide is a binary molecular compound with the chemical formula S2O7. It is composed of two sulfur atoms and seven oxygen atoms. It is an unstable compound that exists only in the gaseous state, it is a powerful oxidizer and is highly reactive. It is often used as a reagent in laboratories and in industry, but it is not found naturally and is not used as a commercial product.

Sulfur tetroxide (SO4) is a binary molecular compound, which is composed of sulfur and oxygen atoms. It has the chemical formula SO4. It is a colorless solid or a colorless or yellowish liquid that has a pungent, suffocating odor and is hygroscopic. It is a strong oxidizing agent and is used in the production of sulfuric acid.

Disulfur trioxide (S2O3) is a binary molecular compound, which is composed of sulfur and oxygen atoms. It has the chemical formula S2O3. It is a highly unstable compound that is not found naturally, it is a powerful oxidizing agent and is highly reactive.

Sulfur dioxide (SO2) is a binary molecular compound, which is composed of sulfur and oxygen atoms. It has the chemical formula SO2. It is a colorless gas with a strong, choking odor. It is a reducing agent and is used as a preservative in food and wine, and as a reducing agent in various chemical reactions.

To know more about  Sulfur dioxide click below:

https://brainly.com/question/7072447#

#SPJ4

1020 X is the least reactive element. The least reactive elements are the inert gases. Inert gases have an atomic number of 2, 10, 18, 36, 54, and 86.

The quantity of protons in an atom's nucleus is known as the atomic number. The amount of protons determines an element's identity. 

The number of protons in an atom's nucleus, that is also equivalent to the amount of electron inside an uncharged atom, is indicated by the word "atomic number," which is typically represented by the letter Z. The neutron number is a representation of the amount of neutrons (N).

To know more about  atomic number visit:

https://brainly.com/question/16858932

#SPJ4

The correct question is

Identify the least reactive element of the following?

A) 168X

B) 2010X

C) 2311X

D) 199X

Specific heat capacity of a substance is the amount of heat required to raise the temperature by one degree Celsius of one gram of a substance. Therefore, 485.9 kJ is the overall enthalpy of the reaction.

Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances.

Reverse the first equation: upper C solid plus upper o subscript 2 gas right arrow upper C upper O subscript 2 gas        ΔH1=-393.5 kJ

Reverse the second equation:2 upper C upper O gas plus upper O subscript 2 gas right arrow 2 upper C upper O subscript 2 gas ΔH2=-566.0KJ

Reverse the third equation: 2 upper H subscript 2 upper o gas right arrow 2 upper H subscript 2 gas plus upper O subscript 2 gas ΔH2=-483.6 kJ

ΔHrxn = 393.5 kJ + 566.0 kJ + (-483.6 kJ)

           = 485.9 kJ

Therefore, 485.9 kJ is the overall enthalpy of the reaction.

To know more about enthalpy, here:

brainly.com/question/24170335

#SPJ1

Nitrogen (N2) is a molecule that has 14 protons.

Nitrogen is a colorless, odorless, and tasteless gas that makes up about 78% of the Earth's atmosphere. Nitrogen is an important component of many compounds, including proteins, DNA, and RNA, and is essential for life on Earth.

Nitrogen gas is also used in a variety of industrial applications, including the production of fertilizers, explosives, and the preservation of food. Nitrogen is a non-metallic, diatomic gas that exists in two stable isotopes, 14N and 15N.

Nitrogen gas is relatively unreactive, due to the strong triple bond between the two nitrogen atoms in a nitrogen molecule (N2). However, under certain conditions, such as high temperatures or the presence of catalysts, nitrogen can react with other elements to form compounds such as ammonia (NH3), nitric oxide (NO), and nitrous oxide (N2O).

In the Earth's atmosphere, nitrogen plays a key role in the nitrogen cycle, a process by which nitrogen is converted between different chemical forms. Nitrogen gas is converted to ammonia by nitrogen-fixing bacteria, and then to nitrite and nitrate by microorganisms in the soil.

Overall, Nitrogen is a very important element in our planet and many industrial processes.

To know more about Nitrogen:

https://brainly.com/question/1380063

#SPJ4

Since 342 kJ of energy are evolved for each mole of NH₃(g), and there are 2 moles of NH₃(g) in the balanced equation, the heat evolved will be2 × 342 kJ = 684 kJ. By convention, when heat is evolved, it takes a negative sign. The balanced thermochemical equation is:

2 NH₃(g) + 2 O₂(g) ⇒ N₂O(g) + 3 H₂O(l)   ΔH° = -684 kJ

To ;learn more about ammonia refer to:

https://brainly.com/question/14854495

#SPJ4

In most cases, acidic byproducts of bacterial fermentation of carbohydrates are produced. while proteins & amino acids break down, alkaline is produced as an end result.

SCFAs and fuel dioxide, methane, and hydrogen—are the byproducts of fermentation. Colonic bacteria also digest proteins and poorly absorbed starches from the upper GI tract in additional to nonstarch polysaccharides.

All animals' gastrointestinal tracts undergo fermentation, although the degree of fermentation varies depending on the number of microbes present, which is typically highest inside the large bowel.

To know more about bacterial fermentation visit:

https://brainly.com/question/3262159

#SPJ4

This immense mountain range began to form between 40 and 50 million years ago, when two large landmasses, India and Eurasia, driven by plate movement, collided is referred to as Himalaya and is therefore denoted as option B.

This is referred to as an elevated portion of the Earth's crust, generally with steep sides that show significant exposed bedrock.

The pressure of the impinging plates from the immense mountain ranges when India and Eurasia collided and was relieved by thrusting skyward, formed what is known as the Himalaya mountains which is why option B was chosen as the correct choice.

Read more about Himalaya here https://brainly.com/question/536493

#SPJ1

The full question is:

This immense mountain range began to form between 40 and 50 million years ago, when two large landmasses, India and Eurasia, driven by plate movement, collided. Because both these continental landmasses have about the same density, one plate could not be subducted under the other. The pressure of the impinging plates could only be relieved by thrusting skyward, and forming the _______________ Mountains.

A) Eurasian

B) Himalaya

C) Rocky

D) Ural