I need help with the solution
Answer:
36.1% Ca
Explanation:
To find the percent calcium, you need to (1) construct the chemical formula of calcium chloride, then (2) calculate the molar mass of calcium chloride, and then (3) calculate the percent calcium in calcium chloride.
(Step 1)
Calcium = Ca²⁺
Chlorine = Cl⁻
Calcium Chloride = CaCl₂
(Step 2)
Atomic Mass (Ca): 40.078 g/mol
Atomic Mass (Cl): 35.453 g/mol
Molar Mass (CaCl₂): 40.078 g/mol + 2(35.453 g/mol)
Molar Mass (CaCl₂): 110.984 g/mol
(Step 3)
CaCl₂ = 1 atom Ca and 2 atoms Cl
1 atom Ca = 40.078 g/mol
40.078 g Ca
-------------------------- x 100% = 36.1% Ca
110.984 g CaCl₂
What would the hydrogen ion concentration be if the pOH was 6?
Answer:
10-6mol/l
Explanation:
hope i helped
Which statements are NOT involved in boiling water? (check all the possible answers)
a.weakening intermolecular interactions
b.breaking covalent bonds
c.producing single atoms of H and O
d.breaking hydrogen bonds
Minute maid states that a bottle of juice contains 473 ml. Consumer groups are interested in determining if the bottles contain less than the amount stated on the label. To test their claim, they sample 30 bottles. The sample mean was 472ml and the standard deviation is 0. 2. What does mu represent here?.
The term mu here represents the average contents of all bottles of juice in the population, which is unknown. Option B
What is the standard deviation?The term standard deviation has to do with the extent that values are scattered around the mean. Now we know that the mean is the average of the distribution.
The standard deviation shows the extent to which the values differ from the mean value of the distribution. It is a measure of dispersion.
Thus, the term mu here represents the average contents of all bottles of juice in the population, which is unknown. Option B
Learn more about standard deviation:https://brainly.com/question/13498201
#SPJ1
Missing parts;
Minute Maid states that a bottle of juice contains 473 mL. Consumer groups are interested in determining if the bottles contain less than the amount stated on the label. To test their claim, they sample 30 bottles. The sample mean was 472mL and the standard deviation is 0.2.
What does mu represent here?
A. The average contents of all bottles of juice in the sample, which is unknown.
B. The average contents of all bottles of juice in the population, which is unknown.
C. The average contents of all bottles of juice in the population, which is 472mL.
D. The average contents of all bottles of juice in the sample, which is 472mL.
What is the main problem with a Planetary system model of the atom?
Electrons moving in a circle would be accelerating, would lose energy, and
would therefore not be able to maintain their orbits.
O Protons would be required to emit electromagnetic radiation when accelerated.
O The Planetary system model requires a massless, positively charged matrix and
there is no evidence that this exists.
1 nts
Electrons moving in a circle would be accelerating, would lose energy, and would therefore not be able to maintain their orbits.
What are atomic models?Atomic models are designed to determine the nature of the atom. There have been several atomic models whose ultimate aim have been to underscore the interaction between the particles that compose the atom.
The atomic models include;
The Thompson modelThe Rutherford modelThe Bohr modelThe Wave mechanics modelThe main problem of the Planetary system model (Rutherford model) of the atom is that electrons moving in a circle would be accelerating, would lose energy, and would therefore not be able to maintain their orbits.
Learn more about planetary model of the atom:https://brainly.com/question/10114170
#SPJ1
What does h20 mean on the periodic elements chart
Answer:
The compound, H₂O, will not be found on the periodic table. This is because the periodic table only consists of individual elements. That being said, the elements found within H₂O are located on the periodic table. H₂O consists of hydrogen, denoted by the symbol "H", and oxygen, denoted by the symbol "O". The subscript (the 2) tells us that there are 2 hydrogen atoms located in the H₂O molecule.
Hydrogen is the first element listed on the periodic table and can be found in the top leftmost position. Oxygen is the eighth element on the periodic able and is located in the second row at the top right.
what is the name of p214
diphosphorus tetraiodide is the name of the p2I4 compound.
What is the name of p2I4?The name of p2I4 is diphosphorus tetraiodide because there are two atoms with phosphorus and four atoms with iodine. We know that 'di' word is used for two while on the other hand, tetra word is used for four.
So we can conclude that diphosphorus tetraiodide is the name of the p2I4 compound.
Learn more about phosphorus here: https://brainly.com/question/25352398
#SPJ1
What mass of ammonium sulfate, (NH4)2SO4 must be added to prepare
200.0 g of a 3.5% solution of ammonium sulfate in water?
Considering the definition of percentage by mass, the mass of ammonium sulfate that must be added to prepare 200.0 g of a 3.5% solution of ammonium sulfate in water is 7 g.
Percentage by massThe percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.
In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.
The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:
[tex]percent by mass=\frac{mass of solute}{mass of solution}x100[/tex]
Mass of ammonium sulfateIn this case, you know:
mass of ammonium sulfate= ?mass of solution= 200 gpercent by mass= 3.5 %Replacing in the definition of percent by mass:
[tex]3.5 =\frac{mass of ammonium sulfate}{200 g}x100[/tex]
Solving:
3.5÷100= [tex]\frac{mass of ammonium sulfate}{200 g}[/tex]
0.035= [tex]\frac{mass of ammonium sulfate}{200 g}[/tex]
0.035×200 g= mass of ammonium sulfate
7 g= mass of ammonium sulfate
Finally, the mass of ammonium sulfate that must be added to prepare 200.0 g of a 3.5% solution of ammonium sulfate in water is 7 g.
Learn more about percent be mass:
brainly.com/question/19168984
brainly.com/question/18646836
#SPJ1
What is 0.0094x10^2 in scientific notation
Answer:
9.4x10^-1
Explanation:
You have to move the decimal left 3 times so you subtract 3 from the power (2) and get -1
What volume of barium chloride, BaCl2 is needed to make a 2.5 M barium
chloride solution with 0.45 mol BaCl2?
Answer:
0.18 L
Explanation:
You can find the volume using the molarity ratio:
Molarity = moles / volume (L)
You can plug the given values into the equation and simplify to find the volume.
Molarity = moles / volume <----- Molarity ratio
2.5 M = 0.45 moles / volume <----- Insert values
(2.5 M) x volume = 0.45 moles <----- Multiply both sides by volume
volume = 0.18 L <----- Divide both sides by 2.5
The volume of a sample of oxygen is 580.3 mL when
the pressure is 0.376 atm and the temperature is 43 °C.
At what temperature is the volume 907.1 L and the
pressure 0.415 atm?
a. 545
O b. 74.2
O c. -89.9
O d. 272
Answer:
545
Explanation:
If we let the unknown temperature in Kelvin be x,
[tex] \frac{0.376 \times 580.3}{43+273} = \frac{0.415 \times 907.1}{x} \\ \\ x = 545[/tex]
1. given 5 mols of the compound below what is the mol ratio between the compound and O? Ca_4Si_2O_6(CO_3)(OH)_2
2. Given 2 mols of the compound in problem one what is the mol to mol ratio os Si?
3. Given 5 mols of the compound in problem one what is the mol to mol ratio between the compound and Ca?
4. Given 3.5 mols of the compound in problem one what is the mol to mol ratio between the compound and C?
5. in the reaction below give the mol to mol ratio between the underlined species
Pb(NO_3)_2(ap)+2KI(aq) -> PbI_2(s)+2KNO_3(aq)
underline underline
The mole ratio of the compound and its constituent elements are as follows:
The mole ratio between the compound and O is 5 : 22The mole ratio between the compound and Si is 2 : 4The mole ratio between the compound and Ca is 5 : 20The mole ratio between the compound and C is 1 : 1What is mole ratio?Mole ratio is the ratio of the moles of one or more elements or compounds to another.
The given compound is Ca₄Si₂O₆(CO₃)(OH)₂
Moles of oxygen present in 1 mole of compound = 11 moles
Moles of Si present in 1 mole of compound = 2 moles
Moles of Ca present in 1 mole of compound = 4 moles
Moles of C present in 1 mole of compound = 1 mole
Given 5 moles of the compound below, the mole ratio between the compound and O is 5 : 22Given 2 moles of the compound below, the mole ratio between the compound and Si is 2 : 4Given 5 moles of the compound below, the mole ratio between the compound and Ca is 5 : 20Given 3.5 moles of the compound below, the mole ratio between the compound and C is 1 : 1Given the equation of the reaction below;
Pb(NO₃)₂ (aq) + 2 KI (aq) --> PbI₂ (s) + 2 KNO₃ (aq)the mole ratio of the reactants and products are as follows:
Pb(NO₃)₂ : 2 KI (aq) = 1 : 2Pb(NO₃)₂ : PbI₂ (s0 = 1 : 1Pb(NO₃)₂ : 2 KNO₃ (aq) = 1 : 2In conclusion, the mole ratio of reaction is the ratio in which moles of the substances combine.
Learn more about mole ratio at: https://brainly.com/question/19099163
#SPJ1
Select the correct structure that
corresponds to the name.
1,1,1-trifluoroethane
The correct chemical structure that corresponds to 1,1,1-trifluoroethane is (a).
What is 1,1,1-trifluoroethane?
A chemical structure is a spatial arrangement of atoms in a molecule. It determines the molecular geometry and when necessary the electronic chemistry as well .1,1,1-Trifluoroethane or simply known as trifluoroethane is Hydrofluorocarbon (HFC) compound that is colourless and highly inflammable gas with ether like odour. One method of preparation of 1,1,1-Trifluoroethane is by fluorination of 1-chloro-1,1-difluoroethane in the presence of hydrofluoric acid. The chemical formula for 1,1,1-Trifluoroethane is [tex]C__{2} } H_{3} F_{3}[/tex]. The high stability of it's chemical structure because of being heavier than air makes it a greenhouse gas with high infrared absorbent power. It can be used as a propellant or refrigerant and in cleaning of electrical equipments.
Learn more about 1,1,1-trifluoroethane here:
https://brainly.com/question/1390779
#SPJ1
If charcoal and sugar were the the main impurities present in crude acetanilide would recrystallisation from water be a good method of purification explain why?
Yes, recrystallization from water would be a viable technique of purification if crude acetanilide contained sugar and charcoal. Due to their physical insolubility, charcoal found in crude acetanilide and water will form a heterogeneous combination. Charcoal will separate during crystallization because it is insoluble in water. Sugar and the unreconstituted crude acetanilide make up the remaining portion of the combination. Crude acetanilide will crystallize in this combination and separate from the sugar and water solution. Filtration will be used to capture the crude acetanilide that has solidified. Sugar and water make a soluble solution, thus they are kept separate. This is how the charcoal and sugar combination is purified and its constituent parts are separated from crude acetanilide using the recrystallization process from water.
A 0.266-g sample of NaC1 (molar mass = 58.44 g/mol) is dissolved in enough water to make 5.20 mL of
solution. Calculate the molarity of the resulting solution.
O 0.875 M
O 4.55 x 10-3 M
O 0.987 M
O 1.14 M
O 0.731 M
In this activity, you are tasked with designing an airbag for a company that creates airbags for automobiles. You must design the driver’s front airbag for a specific car model so it will protect the driver as effectively as possible. For this car, the airbag must have a volume of 58 liters when fully inflated. To provide an adequate cushion for the driver’s head, the air pressure inside the airbag should be 4.4 psi. This pressure value is in addition to the normal atmospheric pressure of 14.7 psi, giving a total absolute pressure of 19.1 psi, which equals 1.30 atmospheres.
The airbag is designed to produce the volume of nitrogen gas required to fill up the airbag.
What is the function of an airbag?An airbag is a bag which is designed to self-inflate and serve as a cushion for the head and neck of a driver to prevent injuries when an impact occurs head-on on the car.
The gas that inflates the airbag is nitrogen which is produced from sodium azide according to equation below:
2NaN₃ → 2Na + 3N₂In conclusion, the design of the airbag is such that the correct amount of sodium azide is present to produce the volume of nitrogen required to fill up the airbag.
Learn more about airbags at: https://brainly.com/question/9697503
#SPJ1
help me out with this question
The concentration will be 12 M. The first option is the correct one.
ConcentrationIt is calculated by dividing the number of moles of solute present in a solution by the volume of the solution.
In this case, the number of moles of solute = 1.2 mols
volume of solvent = 100 mL or 0.1 L
Concentration of the solution = 1.2/0.1 = 12 mol/L or 12 M
More on concentration can be found here: https://brainly.com/question/10725862
#SPJ1
How many moles of PC15 can be produced from 58.0 g of Cl₂ (and excess
P4)?
0.3268 moles of PC15 can be produced from 58.0 g of Cl₂ (and excess
P4).
How to calculate moles?The mole, symbol mol, exists as the SI base unit of the amount of substance. The quantity amount of substance exists as a measurement of how many elementary entities of a provided substance stand in an object or sample.
The balanced chemical equation is
[tex]P_{4} + 10Cl_{2} = 4PCl_{5}[/tex]
The mass of clorine is m([tex]Cl_{2}[/tex]) = 58.0 g
The amount of clorine is n([tex]Cl_{2}[/tex]) = m([tex]Cl_{2}[/tex])/M([tex]Cl_{2}[/tex]) = 58/70.906 = 0.817 mol
The stoichiometric reaction,shows that
10 moles of [tex]Cl_{2}[/tex] yield 4 moles of [tex]PCl_{5}[/tex];
0.817 of [tex]Cl_{2}[/tex] yield x moles of [tex]PCl_{5}[/tex]
n([tex]PCl_{5}[/tex]) = 4*0.817/10 = 0.3268 mole
0.3268 moles of PC15 can be produced from 58.0 g of Cl₂ (and excess
P4).
To know more about stoichiometric reaction, refer:
https://brainly.com/question/14935523
#SPJ9
What would the pH of a solution that had a hydroxide ion concentration of 4.9 x 10-5 M be?
Taking into account the definition of pH and pOH, the pH of the solution is 9.69.
Definition of pHpH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.
The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:
pH= - log [H⁺]= - log [H₃O⁺]
Definition of pOHSimilarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:
pOH= - log [OH⁻]
Relationship between pH and pOHThe following relationship can be established between pH and pOH:
pOH + pH= 14
pH in this caseA solution had a hydroxide ion concentration of 4.9×10⁻⁵ M. This is [OH⁻]= 4.9×10⁻⁵ M. So, pOH is calculated as:
pOH= - log (4.9×10⁻⁵ M)
Solving;
pOH= 4.31
Replacing in the relationship established between pH and pOH, the pH can be calculated as:
pH + 4.31= 14
Solving:
pH= 14 - 4.31
pH= 9.69
In summary, the pH of the solution is 9.69.
Learn more about pH and pOH:
brainly.com/question/16032912
brainly.com/question/13557815
#SPJ1
Allowing water to cascade or bubble in a fountain during the purification process is an example of
a chemical reaction
O a solid dissolving in a liquid
O only a and b
O ion exchange
O a gas dissolving in a liquid
Answer:
ion exchange
Explanation:
because in the time period of chemical reactions it product ion
What would the hydrogen ion concentration be if the pOH was 6?
Taking into account the definition of pH and pOH, the hydrogen ion concentration will be 1×10⁻⁸ M.
Definition of pHpH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.
The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:
pH= - log [H⁺]= - log [H₃O⁺]
Definition of pOHSimilarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:
pOH= - log [OH⁻]
Relationship between pH and pOHThe following relationship can be established between pH and pOH:
pOH + pH= 14
Hydroxide ion concentrationIn this case, you know that pOH= 6.
Replacing in the relationship established between pH and pOH, the pH can be calculated as:
pH + 6= 14
Solving:
pH= 14 - 6
pH= 8
Replacing in the definition of pH the concentration of H⁺ ions is obtained:
- log [H⁺]= 8
Solving:
[H⁺]= 10⁻⁸
[H⁺]= 1×10⁻⁸ M
In summary, the hydrogen ion concentration will be 1×10⁻⁸ M.
Learn more about pH and pOH:
brainly.com/question/16032912
brainly.com/question/13557815
#SPJ1
How many moles of nitrogen gas are there in 6.8 liters at room temperature and pressure (293 K and 100 kPa)?
A. 163.2
B. 0.28
C. 152.3
D. 0.30
0.28 moles of nitrogen gas are there in 6.8 liters at room temperature and pressure (293 K and 100 kPa).
Ideal gas law :
An ideal gas is a gas in which atoms dose not exert any force on each other even after collision which walls and other atoms (inelastic collisions).
Mole definition:
The mole is the amount of compound present in a given system which has molecular mass as that of the mass of carbon12 .carbon 12
Using ideal gas law ,
PV=nRT
Given,
pressure = P = 100kPa
Volume = V = 6.8 Lit
Temperature = room temperature = T = 293 K
R= universal gas constant = 8.314
n= moles = ?
∴[tex]n = \frac{PV}{RT}[/tex]
∴ n = 100 × 6.8 / 8.314 × 293
∴n = 0.28 moles
Learn more about moles here..
https://brainly.com/question/1427235
#SPJ1
a gas has a density of 3.21 g/L at stp what is the gas
The gas is bromine. (This is a fact)
A student reacted dilute nitric acid with lead(II) oxide to prepare lead(II) nitrate. The diagram shows the stages in the method used.
The highlighted apparatus are;
1) stirring rod
2) crucible
What is a chemical reaction?The term chemical reaction refers to the process by which two or more substances are combined to form a product. The product may look like or different from the reactants that were combined to produce it.
Now we can see the set up that was used as shown for the reaction of dilute nitric acid with lead(II) oxide to prepare lead(II) nitrate.
The highlighted apparatus are;
1) stirring rod
2) crucible
Learn more about chemical reaction:https://brainly.com/question/22817140
#SPJ1
A 5ml solution containing ph of 3.5 was mixed with a solution containing ph of 10.5
What will you expect the pH of the mixture be? Basic, acidic, or neutral? Also provide the pH of the combined solution.
The resulting solution will be neutral having a pH of 7.
What is the pH?The term pH is defined as the hydrogen ion concentration in solution. We know that the pH is inversely related to the hydrogen ion concentration in solution.
We know that the reaction between an acid and a base produced a salt. In this case, the salt that is produced is neutral because the acid is completely reacted with the base.
Since the solution contains a mixture of a containing pH of 3.5 and that of a pH of 10.5, the resulting solution will be neutral having a pH of 7.
Learn more about pH:https://brainly.com/question/15289741
#SPJ1
(Yield Problem)
3Mg+2FeCl3=2Fe+3MgCl2
When 20.5 g of Mg reacts with an excess of FeCl3, 25.9 g of Fe is produced. What is the percent
yield of the reaction?
Answer:
Percent Yield Fe = 82.5%
Explanation:
The actual yield is the value produced after an experiment is conducted. The theoretical yield is the value calculated using the balanced chemical equation and atomic/molar masses.
To find the percent yield of iron (Fe), you need to (1) convert grams Al to moles Al (via atomic mass), then (2) convert moles Al to moles Fe (via mole-to-mole ratio from equation coefficients), then (3) convert moles Fe to grams Fe (via atomic mass), and then (4) calculate the percent yield. It is important to arrange the ratios in a way that allows for the cancellation of units. The final answer should have 3 sig figs to reflect the sig figs of the given values.
Atomic Mass (Mg): 24.305 g/mol
Atomic Mass (Fe): 55.845 g/mol
3 Mg + 2 FeCl₃ -----> 2 Fe + 3 MgCl₂
20.5 g Mg 1 mole 2 moles Fe 55.845 g
----------------- x ----------------- x ---------------------- x ----------------- =
24.305 g 3 moles Mg 1 mole
= 31.4 g Fe
Actual Yield
Percent Yield = ---------------------------------- x 100%
Theoretical Yield
25.9 g Fe
Percent Yield = -------------------- x 100%
31.4 g Fe
Percent Yield = 82.5%
34.1 mg NaCl in 117.3 mL of solution
The molarity of the solution will be 4.97 M.
What is molarity?It is the number of moles of solutes per 1 liter of solvent or solution.
Mole of 34.1 g NaCl = 34.1/58.44 = 0.5835 mol
117.3 mL = 117.3/1000 = 0.1173 L
Molarity of the solution = 0.5835/0.1173 = 4.97 M
More on molarity can be found here: https://brainly.com/question/2817451
#SPJ1
How many atoms of oxygen are present in 7.51 grams of
glycine with formula C₂H5O2N?
1.205 × 10²³ atoms of oxygen will be present in 7.51 grams of glycine with formula C₂H5O2N. Details about number of atoms can be found below.
How to calculate number of atoms?
The number of atoms of a substance can be calculated by multiplying the number of moles of the substance by Avogadro's number.
However, the number of moles of oxygen in glycine can be calculated using the following expression:
Molar mass of C₂H5O2N = 75.07g/mol
Mass of oxygen in glycine = 32g/mol
Hence; 32/75.07 × 7.51 = 3.2grams of oxygen in glycine
Moles of oxygen = 3.2g ÷ 16g/mol = 0.2moles
Number of atoms of oxygen = 0.2 × 6.02 × 10²³ = 1.205 × 10²³ atoms
Therefore, 1.205 × 10²³ atoms of oxygen will be present in 7.51 grams of glycine with formula C₂H5O2N.
Learn more about number of atoms at: https://brainly.com/question/8834373
#SPJ1
The question is in the photo
The concentration of LiOH in the reaction is 0.103 M
What is the concentration of lithium hydroxide?This is a neutralization reaction and the equation of the reaction is written as; H2SO4(aq) + 2LiOH(aq) ---->Li2SO4(aq) + H2O(l)
The average volume of acid used is obtained from;
8.54 + 8.51 + 8.68/ 3 = 8.58 mL
CA = 0.150 M
VA = 8.58 mL
CB = ?
VB= 25.0 mL
NA = 1
NB = 2
CAVA/CBVB = NA/NB
CAVANB = CBVBNA
CB = CAVANB/VBNA
CB = 0.150 * 8.58 * 2/25.0 * 1
CB = 0.103 M
The concentration of LiOH in the reaction is 0.103 M
Learn more about neutralization reaction:https://brainly.com/question/20038776
#SPJ1
Which of these terms is used to describe a solution that results when both the salute and solvent are solid. Is it alloy, surface solution or aqueous solution
The terms is used to describe a solution that results when both the salute and solvent are called alloys
What are alloys?Alllys simply refers to mixture of a solid metal made by combining two or more metallic elements.
There exist alloys of
NickelCoppersBrassIn conclusion, the terms is used to describe a solution that results when both the salute and solvent are called alloys
Learn more about alloys:
https://brainly.com/question/13717147
#SPJ1