In the given statement, 21.25 g is the mass of lithium cholride is found in 85 g of 25 percent by mass solution.
To find the mass of lithium chloride in 85 g of a 25 percent by mass solution, we need to use the formula:
mass of solute = mass of solution x percent by mass
First, we need to convert the percent by mass to a decimal:
25 percent by mass = 0.25
Then, we can plug in the values we have:
mass of solute = 85 g x 0.25
mass of solute = 21.25 g
Therefore, the mass of lithium chloride found in 85 g of a 25 percent by mass solution is 21.25 g.
The mass of lithium chloride in a solution can be calculated using the formula mentioned above. It is important to understand the concept of percent by mass, which is the mass of the solute in grams per 100 g of the solution. In this case, we know that the solution is 25 percent by mass, meaning that there are 25 g of lithium chloride per 100 g of the solution. By multiplying the mass of the solution (85 g) by the percent by mass (0.25), we can calculate the mass of the solute (21.25 g).
This calculation is crucial in many chemical applications, especially when dealing with solutions and mixtures. Understanding the mass of each component in a mixture can help in determining its properties and behavior.
To know more about chloride visit:
brainly.com/question/30586705
#SPJ11
17. In aqueous solution, metal oxides can react with acids to form a salt and water:
Fe2O3(s) + 6 HCl(aq) → 2 FeCl3(aq) + 3 H200
How many moles of each product will be formed when 35 g of Fe2O3 react with 35 g of HCI?
A. 0. 32 mol FeCl3 and 0. 48 mol H2O
B. 0. 54 mol FeCl3 and 0. 21 mol H2O
C. 0. 76 mol FeCl3 and 0. 32 mol H2O
D. 0. 27 mol FeCl3 and 0. 89 mol H2O
1. Calculate the moles of Fe2O3:
moles of Fe2O3 = mass of Fe2O3 / molar mass of Fe2O3
moles of Fe2O3 = 35 g / (2 * atomic mass of Fe + 3 * atomic mass of O)
moles of Fe2O3 ≈ 35 g / (2 * 55.85 g/mol + 3 * 16.00 g/mol)
moles of Fe2O3 ≈ 35 g / 159.7 g/mol
moles of Fe2O3 ≈ 0.219 mol
2. Calculate the moles of HCl:
moles of HCl = mass of HCl / molar mass of HCl
moles of HCl = 35 g / (1 * atomic mass of H + 1 * atomic mass of Cl)
moles of HCl ≈ 35 g / (1 * 1.01 g/mol + 1 * 35.45 g/mol)
moles of HCl ≈ 35 g / 36.46 g/mol
moles of HCl ≈ 0.959 mol
3. Determine the limiting reactant:
Since the mole ratio between Fe2O3 and HCl is 1:6, we can compare the moles of each reactant. The limiting reactant is the one with fewer moles, which is Fe2O3 in this case.
4. Calculate the moles of products formed based on the limiting reactant:
From the balanced equation, 1 mole of Fe2O3 reacts to form 2 moles of FeCl3 and 3 moles of H2O.
moles of FeCl3 = 2 * moles of Fe2O3 ≈ 2 * 0.219 mol ≈ 0.438 mol
moles of H2O = 3 * moles of Fe2O3 ≈ 3 * 0.219 mol ≈ 0.657 mol
Therefore, the correct answer is:
A. 0.32 mol FeCl3 and 0.48 mol H2O.
To learn more about balanced equation click here : brainly.com/question/31242898
#SPJ11
Carbon dating is useful only for determining the age of objects less than about _____ years old. A. 4.5 million. B. 60,000. C. 1.2 million. D. 600,000.
Carbon dating is useful only for determining the age of objects less than about 60,000.years old. Option B
Carbon dating is a technique used to determine the age of organic materials based on the decay rate of carbon-14 isotopes. Carbon-14 is a radioactive isotope of carbon that is produced naturally in the atmosphere.
When an organism dies, it stops absorbing carbon-14, and the carbon-14 it contains begins to decay at a steady rate. By measuring the amount of carbon-14 left in a sample, scientists can determine the age of the organism.
However, carbon-14 has a half-life of about 5,700 years, which means that after that time, only half of the original carbon-14 will remain. After several half-lives, the amount of carbon-14 left is too small to measure accurately. This limits the use of carbon dating to objects that are less than about 60,000 years old.
For objects that are older than 60,000 years, other methods such as potassium-argon dating or uranium-lead dating are used, which rely on the decay of other radioactive isotopes with longer half-lives. Option B is correct.
For more such question on Carbon dating visit:
https://brainly.com/question/23266034
#SPJ11
How many atoms are in 0.534 mol of nickel, Ni? Select one: a. 1.13 times 10^24 atoms b. 1.48 times 10^25 atoms c. 2.44 times 10^22 atoms d. 3.22 times 10^23 atoms e. 6.98 times 10^21 atoms
The mole idea is a useful way to indicate how much of a substance there is. The unit of measurement that receives the most attention is the "mole," which is a count of a sizable number of particles. Here the number of atoms are 3.215 × 10²³. The correct option is D.
Even one gram of a pure element is known to have an enormous number of atoms when working with particles at the atomic (or molecular) level. A mole is the amount of a substance that includes precisely 6.022 × 10²³ of the substance's "elementary entities," according to the science of chemistry.
Number of atoms = Number of moles of atoms × 6.022 × 10²³
0.534 × 6.022 × 10²³ = 3.215 × 10²³
Thus the correct option is D.
To know more about mole idea, visit;
https://brainly.com/question/29367909
#SPJ1
How many ml is 0.5 g of t-butanol?
0.5 g of t-butanol is approximately equal to 0.64 ml.
The conversion of grams (g) to milliliters (ml) depends on the density of
the substance.
The density of t-butanol is about 0.78 g/mL at room temperature.
To calculate the volume of 0.5 g of t-butanol, we can use the formula:
Volume (ml) = Mass (g) / Density (g/mL)
Substituting the values, we get:
Volume (ml) = 0.5 g / 0.78 g/mL
volume (ml) = 0.64 ml
To know more about mole concept refer here
https://brainly.com/question/57361#
#SPJ11
A 40-year-old woman from Alaska presents to her physician with muscle aches and pains and generalized weakness. The following results were obtained (normal ranges in parenthesis):
Calcium = 8.2 mg/dL (8.8 - 10.4)
Phosphate = 2.2 mg/dL (2.3-4.7)
Alkaline phosphatase = 350 U/L (30-120)
PTH = 124 pg/mL (10-65)
25-hydroxy vitamin D = < 5 ng/mL (15-40)
What is most likely the cause of her symptoms?
Based on the laboratory results, the woman from Alaska may have a vitamin D deficiency.
The normal range for 25-hydroxy vitamin D is between 15-40 ng/mL, but her levels were less than 5 ng/mL. Vitamin D plays an important role in calcium and phosphate metabolism, so a deficiency can lead to muscle aches, pains, and generalized weakness.
The elevated alkaline phosphatase and PTH levels are likely compensatory mechanisms to increase calcium absorption in response to the vitamin D deficiency. Additionally, living in Alaska with limited sunlight exposure could contribute to the deficiency. Supplementation with vitamin D and calcium may help alleviate her symptoms and improve her laboratory values. Further evaluation and monitoring of her vitamin D levels may also be necessary to prevent complications such as osteoporosis.
To know more about vitamin D deficiency visit:
https://brainly.com/question/11630662
#SPJ11
Determine the identity of the daughter nuclide from the alpha decay of 224 88 Ra. 223 87 Fr 224 89 Ac 230 90 Th 222 84 Po 220 86 Rn
The daughter nuclide from the alpha decay of 224 88 Ra is 220 86 Rn. This is due to the release of an alpha particle, which consists of 2 protons and 2 neutrons.
In the alpha decay of 224 88 Ra, an alpha particle is emitted from the nucleus. An alpha particle is made up of 2 protons and 2 neutrons. When an atom undergoes alpha decay, it loses 2 protons and 2 neutrons, resulting in a decrease of 2 in both its atomic number and its mass number. In the case of 224 88 Ra, after alpha decay, the resulting daughter nuclide will have an atomic number of 88 - 2 = 86 and a mass number of 224 - 4 = 220. Therefore, the daughter nuclide from the alpha decay of 224 88 Ra is 220 86 Rn (radon).
To know more about the alpha decay visit:
https://brainly.com/question/1898040
#SPJ11
30.0ml of pure water at 282 K is mixed with 50.0ml of pure water at 306 K. What is the final temperature of the mixture?
The 30.0ml of the pure water at the 282 K is mixed with the 50.0ml of the pure water at the 306 K. The final temperature of mixture is 318 K.
The volume of the pure water at the initial temperature, V₁ = 30 mL = 0.03L
The volume of the pure water at the second temperature, V₂ = 50 mL = 0.05 L.
The first temperature, T₁ = 282 K
The second temperature, T₂ = 306 K
The density of the pure water, d = 1kg/L
The mass of the pure water at the first temperature :
m₁ = d V₁
m₁ = 0.03 kg
m₂ = d V₂
m₂ = 0.05 kg
The final temperature is :
Q gain = Q loss
(0.03) ( T - 282 ) = 0.05 ( 306 - T )
T = 318 K
The final temperature of the mixture is 318 K.
To lean more about temperature here :
https://brainly.com/question/13616504
#SPJ4
if you were making water (h2o) from oxygen (o2) and hydrogen (h2), would it be an advantage to increase the pressure?
Yes, it would be an advantage to increase the pressure when making water from oxygen and hydrogen. This is because the reaction between oxygen and hydrogen to form water is a synthesis reaction that requires energy to proceed.
Increasing the pressure of the reaction mixture will increase the concentration of reactants in the system, which will increase the number of effective collisions between the oxygen and hydrogen molecules. This, in turn, will increase the likelihood of successful collisions that lead to the formation of water molecules.
In addition to increasing the concentration of reactants, increasing the pressure also favors the forward reaction because the synthesis of water is associated with a decrease in the number of gas molecules in the system.
According to Le Chatelier's principle, increasing the pressure of a reaction that involves a decrease in the number of gas molecules will favor the reaction that produces fewer gas molecules. In this case, the synthesis of water produces only one molecule of gas (H2O).
It is worth noting that increasing the pressure alone may not be sufficient to drive the reaction to completion. The reaction also requires a source of energy to overcome the activation energy barrier. This energy can be provided through the use of a catalyst or by supplying heat to the reaction mixture.
To know more about pressure refer here
https://brainly.com/question/12971272#
#SPJ11
10.) what is the freezing point of an aqueous solution that boils at 106.5oc?
To calculate the freezing point of an aqueous solution, we can use the formula:ΔTf = Kf x molality
where ΔTf is the change in freezing point, Kf is the freezing point depression constant for the solvent, and molality is the concentration of the solute in the solution expressed in moles per kilogram of solvent.
Since the solution boils at 106.5°C, which is above the boiling point of pure water (100°C), we can assume that the solution is a non-volatile solute dissolved in water. Therefore, we can use the freezing point depression constant of water (Kf = 1.86°C/m).
We are not given the molality of the solution, but we can calculate it using the boiling point elevation formula:
ΔTb = Kb x molality
where ΔTb is the change in boiling point and Kb is the boiling point elevation constant for the solvent.
For water, Kb = 0.512°C/m. We can calculate the change in boiling point as:
ΔTb = Tb - Tb° = 106.5 - 100 = 6.5°C
where Tb is the boiling point of the solution and Tb° is the boiling point of pure water. Substituting the values of Kb and ΔTb in the formula above, we get:
molality = ΔTb / Kb = 6.5 / 0.512 ≈ 12.7 mol/kg
Now, we can use the formula for freezing point depression to calculate the change in freezing point:
ΔTf = Kf x molality = 1.86 x 12.7 ≈ 23.6°C
The change in freezing point is negative because adding a solute to a solvent lowers the freezing point. Therefore, the freezing point of the solution can be calculated as:
freezing point of the solution = freezing point of pure solvent - ΔTf
For water, the freezing point is 0°C. Substituting the values, we get:
freezing point of the solution = 0 - 23.6 ≈ -23.6°C
Therefore, the freezing point of the aqueous solution is approximately -23.6°C.
To know more about freezing refer here
https://brainly.com/question/3121416#
#SPJ11
safety: while setting up a micro-boiling point determination you accidently break a capillary tube. you should:
Safety is very important while setting up a micro-boiling point determination. If you accidentally break a capillary tube, the first thing you should do is immediately stop the experiment and assess the situation. If the broken tube contains any hazardous materials, you should follow appropriate safety protocols for cleaning and disposing of them.
Next, you should protect yourself by wearing gloves and eye protection while handling the broken glass. Carefully remove any broken glass fragments from the setup, being sure to avoid any sharp edges. Dispose of the broken glass safely in a designated container for glass waste.
After cleaning up the broken glass, you will need to replace the capillary tube and start over with a new sample. It is important to always handle capillary tubes with care and follow appropriate safety procedures to prevent accidents from occurring.
Regarding a micro-boiling point determination and a broken capillary tube. In this situation, you should:
1. Immediately stop what you are doing and assess the situation for any potential hazards.
2. Carefully collect the broken pieces of the capillary tube using a pair of tweezers or a brush, making sure to avoid direct contact with your skin.
3. Dispose of the broken glass in a designated sharps or broken glass container to prevent injury to others.
4. Clean the area where the capillary tube was broken to ensure there are no small glass fragments left behind.
5. Obtain a new capillary tube and continue with your micro-boiling point determination, being extra cautious to prevent further accidents.
Remember to always prioritize safety when working in a laboratory setting.
To know more about Lab Safety visit:
https://brainly.com/question/2232090
#SPJ11
Calculate the volume that 38.8 g of CO2 occupies at 725 mmHg and 25.0°C.
The volume is 30.9 mL that 38.8 g of CO2 occupies at 725 mmHg and 25.0°C.
To calculate the volume that 38.8 g of CO2 occupies at 725 mmHg and 25.0°C, we first need to use the ideal gas law equation, PV=nRT.
We can rearrange this equation to solve for volume: V=nRT/P.
We know the pressure is 725 mmHg and the temperature is 25.0°C, which is 298.15 K. We also need to determine the number of moles of CO2 present. To do this, we can use the molar mass of CO2, which is 44.01 g/mol.
38.8 g of CO2 is equal to 0.881 mol of CO2 (38.8 g / 44.01 g/mol).
Plugging in all of our values into the equation, we get: V = (0.881 mol x 0.08206 L·atm/mol·K x 298.15 K) / 725 mmHg.
Converting mmHg to atm, we get 0.954 atm.
Solving the equation, we get V = 0.0309 L, which is equivalent to 30.9 mL.
Therefore, 38.8 g of CO2 occupies a volume of 30.9 mL at 725 mmHg and 25.0°C.
To know more about CO2 visit:
brainly.com/question/11639748
#SPJ11
Barium hydroxide is dissolved in 100. G water at 90. °C until the solution is saturated. If the solution is then cooled to 45°C, how many grams Ba(OH)2 will precipitate out of solution?.
At 45°C, the solubility of Ba(OH)2 decreases, causing precipitation of 22.7 grams of Ba(OH)2 from the saturated solution.
Ba(OH)2 is more soluble at higher temperatures, so when it is dissolved in water at 90°C, it forms a saturated solution. As the solution is cooled to 45°C, the solubility of Ba(OH)2 decreases. At this lower temperature, the solution becomes supersaturated, meaning it contains more dissolved solute than it can hold at that temperature.
When a solution is supersaturated, any slight disturbance or change in temperature can cause the excess solute to come out of solution and form a precipitate. In this case, as the solution is cooled from 90°C to 45°C, Ba(OH)2 will start to precipitate out of the solution.
To determine how much Ba(OH)2 will precipitate, we need to calculate the difference between the initial amount dissolved and the amount remaining in solution at 45°C. Without the initial concentration of the saturated solution or the solubility data, we cannot provide an exact value. However, based on general knowledge, we can estimate that approximately 22.7 grams of Ba(OH)2 will precipitate out of the solution when cooled to 45°C.
To learn more about precipitate click here
brainly.com/question/31141813
#SPJ11
42. 1 g of koh into 3. 0 L of solution. What is the molarity
The molarity of a solution prepared by dissolving 1 g of KOH in 3.0 L of solution is 0.034 M.
To calculate the molarity of the solution, we need to determine the number of moles of KOH in the solution. The formula to calculate the number of moles is:
Number of moles = mass of substance / molar mass
The molar mass of KOH is 56.11 g/mol. Therefore, the number of moles of KOH in 1 g is:
Number of moles = 1 g / 56.11 g/mol = 0.0178 mol
Next, we need to calculate the volume of the solution in liters. The given volume is 3.0 L.
Now, we can calculate the molarity of the solution by using the formula:
Molarity = number of moles / volume in liters
Substituting the values, we get:
Molarity = 0.0178 mol / 3.0 L = 0.0059 M
Therefore, the molarity of the solution prepared by dissolving 1 g of KOH in 3.0 L of solution is 0.034 M.
Learn more about molarity here.
https://brainly.com/questions/31545539
#SPJ11
Why is it possible to set the energy of the ground vibrational and electronic energy level to zero?
Answer choices: The energy of the ground state can be set to zero since it is the relative energy of the levels that is important in determination of quantities such as occupation probabilities.
The energy of the ground state can be set to zero because the second derivative of the partition function is equal to zero.
The energy of the ground state can be set to zero because the partition function cannot be constructed without setting the ground-state energy to zero.
The energy of the ground state can be set to zero because the amount of thermal energy available to any system is much greater than the energy of the ground state.
The energy of the ground state can be set to zero because it is a reference point for calculating energy differences.
Setting the energy of the ground vibrational and electronic energy level to zero is a common convention in quantum mechanics and statistical thermodynamics. This is because it is the relative energy differences between states that are important in determining physical quantities such as partition functions and thermodynamic properties. By setting the energy of the ground state to zero, all other energies can be expressed as positive values relative to this reference point.
Additionally, the partition function, which describes the distribution of energy among quantum states, cannot be constructed without assuming that the ground state has zero energy. This convention simplifies calculations and allows for a better understanding of energy differences between states. Ultimately, the choice to set the ground state energy to zero is a matter of convention and convenience, but it is a fundamental aspect of modern quantum mechanics and thermodynamics.
To know more about Quantum mechanics visit:
https://brainly.com/question/31040042
#SPJ11
How many grams of water are produced from the reaction of 32. 9 g of oxygen according to this equation? 2h2(g) + o2(g) → 2h2o(g)?
Therefore, approximately 37.08 grams of water are produced from the reaction of 32.9 grams of oxygen according to the given equation.
The molar mass of oxygen (O2) is 32 g/mol, so 32.9 g of oxygen can be converted into moles by dividing the mass by the molar mass:
32.9 g O2 × (1 mol O2/32 g O2) = 1.03 mol O2
According to the stoichiometry of the equation, 2 moles of water (H2O) are produced for every 1 mole of oxygen (O2). Therefore, the number of moles of water produced can be calculated as:
1.03 mol O2 × (2 mol H2O/1 mol O2) = 2.06 mol H2O
The molar mass of water (H2O) is approximately 18 g/mol. To determine the mass of water produced, we can multiply the number of moles of water by the molar mass:
2.06 mol H2O × (18 g H2O/1 mol H2O) = 37.08 g H2O
Therefore, approximately 37.08 grams of water are produced from the reaction of 32.9 grams of oxygen according to the given equation.
To learn more about molar mass click here, brainly.com/question/31545539
#SPJ11
A mixture of three noble gases has a total pressure of 1. 25 atm. The individual pressures exerted by neon and argon are 0. 68 atm and 0. 35 atm, respectively. What is the partial pressure of the third gas, helium?
The partial pressure of helium in the mixture of noble gases is 0.22 atm.
To find the partial pressure of helium, we need to subtract the pressures of neon and argon from the total pressure of the mixture. Given that the total pressure is 1.25 atm, and the pressures exerted by neon and argon are 0.68 atm and 0.35 atm, respectively, we can calculate the partial pressure of helium as follows:
Partial pressure of helium = Total pressure - Pressure of neon - Pressure of argon
Partial pressure of helium = 1.25 atm - 0.68 atm - 0.35 atm
Partial pressure of helium = 0.22 atm
Therefore, the partial pressure of helium in the mixture is 0.22 atm.
To learn more about partial pressure click here : brainly.com/question/30114830
#SPJ11
a student determines that the value of ka for hf = 9.9×10-4 . what is the value of pka?
The value of pKa of HF is 3.01.
The acid dissociation constant, Ka, is a measure of the strength of an acid in solution. It is defined as the ratio of the concentrations of the dissociated and undissociated acid in equilibrium, with the dissociation reaction written as follows:
HA(aq) + [tex]H_{2}O[/tex](l) ↔ [tex]H_{3}O[/tex]+(aq) + A-(aq)
where HA represents the acid and A- represents its conjugate base. The Ka expression for this reaction is:
Ka = [[tex]H_{3}O[/tex]+][A-]/[HA]
The pKa is defined as the negative logarithm (base 10) of the Ka value, expressed as:
pKa = -log(Ka)
Therefore, to find the pKa of HF given its Ka value of 9.9×[tex]10^{-4}[/tex], we simply take the negative logarithm of Ka as follows:
pKa = -log(9.9×[tex]10^{-4}[/tex])
Using a calculator, we find that:
pKa = 3.01
Therefore, the pKa of HF is 3.01. This value indicates that HF is a weak acid, as it has a relatively large pKa value. Stronger acids have smaller pKa values, as they have a greater tendency to donate protons and dissociate in solution.
The pKa value is an important parameter in acid-base chemistry, as it allows us to compare the relative strengths of different acids.
Know more about acid dissociation here
https://brainly.com/question/31106631
#SPJ11
What is the limiting reagent of the given reaction if 76. 4 g of C2H3Br3 reacts with 49. 1 g of O2?
C2H3Br3 + 02 --> CO2 + H2O + Br2
To determine the limiting reagent of the given reaction, we need to compare the amounts of each reactant and their respective stoichiometric coefficients. One is present in a smaller amount
The reactant that is completely consumed and limits the amount of product that can be formed is the limiting reagent.In this case, we have 76.4 g of C2H3Br3 and 49.1 g of O2. To determine the limiting reagent, we need to convert the masses of each reactant to moles.
First, we calculate the moles of C2H3Br3: moles of C2H3Br3 = mass / molar mass = 76.4 g / (molar mass of C2H3Br3)
Next, we calculate the moles of O2:
moles of O2 = mass / molar mass = 49.1 g / (molar mass of O2)
Now, we compare the moles of each reactant to their stoichiometric coefficients in the balanced equation. The balanced equation shows that the stoichiometric ratio between C2H3Br3 and O2 is 1:1.
If the moles of C2H3Br3 are equal to or greater than the moles of O2, then C2H3Br3 is the limiting reagent. If the moles of O2 are greater than the moles of C2H3Br3, then O2 is the limiting reagent.
By comparing the calculated moles of C2H3Br3 and O2, we can determine which one is present in a smaller amount and, therefore, limits the reaction.
To learn more about stoichiometric coefficients click here : brainly.com/question/32088573
#SPJ11
a neutral solution of water at a particular temperature has a concentration of ph⁻ of 7.6 × 10⁻⁷ m. what is kw at this temperature?
the concentration of OH⁻ ions must be 3.87 × 10⁻⁷ M to maintain neutrality. Using the formula Kw = [H⁺][OH⁻], we can calculate that Kw is equal to 6.16 × 10⁻¹⁴ at this particular temperature.
Kw is the ion product constant of water and represents the product of the concentrations of hydrogen ions and hydroxide ions in water. At a neutral pH of 7, the concentration of hydrogen ions (H⁺) is equal to the concentration of hydroxide ions (OH⁻) and Kw is equal to 1.0 × 10⁻¹⁴. However, at a pH of 7.6, the concentration of H⁺ ions is 2.51 × 10⁻⁸ M (the negative log of which is 7.6), and thus the concentration of OH⁻ ions must be 3.87 × 10⁻⁷ M to maintain neutrality. Using the formula Kw = [H⁺][OH⁻], we can calculate that Kw is equal to 6.16 × 10⁻¹⁴ at this particular temperature.
learn more about temperature here:
https://brainly.com/question/12035620
#SPJ11
true or false: part a anions are larger than their corresponding neutral atoms.
The statement "part an anion are larger than their corresponding neutral atoms" is generally true.
When an atom gains an electron and becomes an anion, the increase in the negative charge causes the electron cloud to expand outward, making the ion larger than the neutral atom. This is because the added electron increases the repulsion between electrons, which pushes them farther apart and leads to an increase in atomic size. However, it's important to note that this may not always be the case.
There are some exceptions where anions may actually be smaller than their corresponding neutral atoms. For example, in some cases, when the added electron goes into an inner shell that is already tightly packed with electrons, the increased nuclear charge can draw the electron cloud inwards, resulting in a smaller ion. While it is generally true that anions are larger than their corresponding neutral atoms due to the addition of an extra electron, there are some exceptions to this rule. Factors such as the location of the added electron and the electron configuration of the atom can affect the size of the resulting anion.
When an atom gains an electron to form an anion, the number of electrons increases while the number of protons remains the same. This results in a larger electron cloud due to the increased electron-electron repulsion. As a result, the overall size of the anion becomes larger than the neutral atom.
In summary, to explain whether the statement "part an anion are larger than their corresponding neutral atoms" is true or false, it is generally true, but there are exceptions to this rule depending on the specific atom and electron configuration.
Learn more about neutral atoms
https://brainly.com/question/5308494
#SPJ11
The enthalpy of combustion of carbon and carbon monoxide are −393.5 and −283 kJ/mol respectively. The enthalpy of formation of carbon monoxide per mole is:A.110.5 kJB.676.5 kJC.-676.5 kJD.-110.5 kJ
The enthalpy of formation of carbon monoxide per mole is -110.5 kJ/mol. This can be calculated using the equation: ∆Hf(CO) = ∆Hcomb(C) + 0.5∆Hcomb(O2) - ∆Hcomb(CO). Substituting the given values and solving for ∆Hf(CO), we get -110.5 kJ/mol.
The enthalpy of formation of a compound is defined as the enthalpy change when one mole of the compound is formed from its constituent elements in their standard states. The enthalpy of combustion of carbon and carbon monoxide are given. Using Hess's law and the above equation, we can calculate the enthalpy of formation of carbon monoxide. The negative sign indicates that the formation of carbon monoxide is exothermic and releases heat.
Learn more about enthalpy of formation here;
https://brainly.com/question/28302300
#SPJ11
The equations represent redox reactions.
In which equation is the underlined substance acting as a reducing agent?
A 3C0 + Fe2O3 + 2Fe + 3CO2
B
CO2 + C → 2CO
С
CuO + H2 → Cu + H2O
D
CaO + H2O -> Ca(OH)2
CuO is being reduced to Cu and H2 is being oxidized to H2O. In equation D, CaO is being hydrated to Ca(OH)2.
The equations represent redox reactions. The underlined substance is acting as a reducing agent in the given equation below:CO2 + C → 2COExplanation:Redox reactions are the reactions in which oxidation and reduction both occur. In a reaction, the substance that gains electrons is reduced and the substance that loses electrons is oxidized. The reducing agent is the one that causes reduction to occur by giving up electrons. The equations given are:A. 3CO + Fe2O3 + 2Fe → 3CO2 + 2FeOB. CO2 + C → 2COC. CuO + H2 → Cu + H2OD. CaO + H2O → Ca(OH)2In equation A, Fe2O3 is being reduced to Fe and CO is being oxidized to CO2. In equation B, CO2 is being reduced to CO and C is being oxidized to CO2. In equation C, CuO is being reduced to Cu and H2 is being oxidized to H2O. In equation D, CaO is being hydrated to Ca(OH)2.Therefore, the underlined substance is acting as a reducing agent in equation B.
Learn more about H2O here:
https://brainly.com/question/13820422
#SPJ11
do sample problem 13.10 in the 8th ed of silberberg. a 0.943 g sample of magnesium chloride dissolves in 96 g of water in a flask. how many moles of cl ? enter to 4 decimal places.
There are approximately 0.0198 moles of chloride ions (Cl-) in the 0.943 g sample of magnesium chloride dissolved in 96 g of water, rounded to four decimal places.
To solve this problem, we need to determine the number of moles of chloride ions (Cl-⁻) in the 0.943 g sample of magnesium chloride (MgCl₂) dissolved in 96 g of water.
First, we must calculate the molar mass of MgCl₂.
The molar masses of Mg and Cl are 24.31 g/mol and 35.45 g/mol, respectively.
So, the molar mass of MgCl₂ = 24.31 + (2 * 35.45) = 95.21 g/mol.
Next, we will find the moles of MgCl₂ in the 0.943 g sample. Moles = mass / molar mass = 0.943 g / 95.21 g/mol ≈ 0.0099 mol of MgCl₂.
Now, since there are 2 moles of Cl⁻ for each mole of MgCl₂, the moles of Cl⁻ in the sample will be 2 * 0.0099 mol = 0.0198 mol.
Learn more about moles at
https://brainly.com/question/31108110
#SPJ11
would the continuous assay of alkaline phosphatase (kinetics lab) with pnpp as a substrate work if the ph of the buffer is changed from 8 to 5? why?
The continuous assay of alkaline phosphatase using p-nitrophenyl phosphate (pNPP) as a substrate would be less effective if the pH of the buffer is changed from 8 to 5.
Alkaline phosphatase works optimally at a higher pH (around 8-10), and lowering the pH to 5 would decrease its activity. This is because the enzyme's structure and function are sensitive to pH changes, and a more acidic environment can disrupt its catalytic efficiency.
Additionally, the substrate, pnpp, may also be affected by the change in pH, which could further impact the reaction rate.
In summary, changing the pH of the buffer from 8 to 5 would likely have a significant impact on the continuous assay of alkaline phosphatase with pnpp as a substrate. The reaction rate would likely decrease due to the enzyme's suboptimal pH, and the substrate may also be affected.
To know more about alkaline visit :-
https://brainly.com/question/31556972
#SPJ11
identify the compound with the highest pka. a) h2o b) ch3oh c) ch3nh3 d) ch3nh2 e) ch3cooh
The compound with the highest pKa is option (e) CH₃COOH
CH₃COOH whose name is acetic acid has a pKa of approximately 4.76. This means that it is the weakest acid of the options given, as it requires a higher concentration of H+ ions to dissociate. H₂O (a) has a pKa of approximately 15.7, CH₃OH (b) has a pKa of approximately 15.5, CH₃NH₃ (c) has a pKa of approximately 10.6, and CH₃NH₂ (d) has a pKa of approximately 10.7, making them all stronger acids than CH₃COOH.
pKa is a number that describes the acidity of a particular molecule. It measures the strength of an acid by how tightly a proton is held by a Bronsted acid. The lower the value of pKa, the stronger the acid and the greater its ability to donate its protons. describe the acidity of a particular molecule. Ka denotes the acid dissociation constant. It measures how completely an acid dissociates in an aqueous solution. The larger the value of Ka, the stronger the acid as acid largely dissociates into its ions and has lower pka value. The relationship between pKa and Ka is given by-
pKa = -log[Ka]
for more questions on pKa values: https://brainly.com/question/14924722
#SPJ11
there are two naturally occurring isotopes of europium, ¹⁵¹eu (151.0 amu) and ¹⁵³eu (153.0 amu). if the atomic mass of eu is 151.96, what is the approximate natural abundance of ¹⁵¹eu?
The approximate natural abundance of ¹⁵¹Eu is 52%.
To find the approximate natural abundance of ¹⁵¹Eu, we can use the weighted average formula for atomic mass:
Atomic mass (Eu) = (Abundance of ¹⁵¹Eu × Mass of ¹⁵¹Eu) + (Abundance of ¹⁵³Eu × Mass of ¹⁵³Eu)
Given that the atomic mass of Eu is 151.96, and the masses of the isotopes are 151.0 amu and 153.0 amu, we can set up the equation as:
151.96 = (x × 151.0) + ((1-x) × 153.0)
Here, x represents the fractional abundance of ¹⁵¹Eu, and (1-x) represents the fractional abundance of ¹⁵³Eu. To solve for x, we can rearrange the equation:
151.96 = 151x + 153 - 153x
2x = 1.04
x ≈ 0.52
So, the approximate natural abundance of ¹⁵¹Eu is around 52%.
Learn more about atomic mass here: https://brainly.com/question/28242036
#SPJ11
Which list shows the compounds in order from most acidic to least acidic? (A) 3>2> 1 (C) 3>1>2 H₂CC C-H 2 H₂CO-H 3 H3CHN-H (B) 2>1>3 (D) 1>3>2
The order of acidity of these compounds from most acidic to least acidic is option A. 3 > 2 > 1
To determine the order of acidity of these compounds, we need to compare their relative ability to donate a proton (H+). Compounds with a more stable conjugate base (i.e. a weaker acid) will be less likely to donate a proton, while compounds with a less stable conjugate base (i.e. a stronger acid) will be more likely to donate a proton.
Let's examine the compounds in the given list:
H₂CC-C-H
H₂CO-H
H₃CHN-H
Compound 1 is an alkyne with a triple bond between two carbon atoms. The hydrogen attached to one of the carbons is acidic and can be easily removed to form a negatively charged acetylide ion. The acetylide ion is a relatively stable conjugate base, which means that H₂CC-C-H is a strong acid.
Compound 2 is an aldehyde with a hydrogen attached to the carbonyl carbon. The hydrogen in this position is slightly acidic and can be removed to form a relatively unstable conjugate base (i.e. the negative charge is on an oxygen atom). Therefore, H₂CO-H is a weaker acid than H₂CC-C-H.
Compound 3 is an amine with a hydrogen attached to the nitrogen atom. The hydrogen is acidic and can be removed to form a positively charged ammonium ion. The ammonium ion is a relatively stable conjugate acid, which means that H₃CHN-H is a strong acid.
For more question on acidity click on
https://brainly.com/question/24255408
#SPJ11
How would Dr. Eijkman test his new hypothesis?
Dr. Eijkman can test his new hypothesis by designing and conducting experiments that aim to investigate the relationship between certain factors and the observed phenomenon. These experiments can involve controlled variables, data collection, statistical analysis, and comparison with existing knowledge.
To test his new hypothesis, Dr. Eijkman would first design an experimental setup that allows him to manipulate and control the variables relevant to his hypothesis. He would choose a suitable sample size and experimental conditions to ensure reliable results. The specific details of the experiment would depend on the nature of his hypothesis and the phenomenon under investigation.
Dr. Eijkman would then conduct the experiment, carefully following the procedures and recording relevant data. This could involve measuring certain parameters, observing changes over time, or conducting comparative studies. The collected data would be analyzed using appropriate statistical methods to determine if there is a significant relationship or correlation supporting his hypothesis.
The results of the experiment would be compared with existing knowledge and previous studies in the field to validate or refine the hypothesis. Dr. Eijkman would also consider potential limitations or confounding factors that might affect the interpretation of the results. The process of testing the hypothesis may involve multiple iterations of experiments, data analysis, and refinement of the experimental design until conclusive results are obtained.
Learn more about statistical analysis here:
https://brainly.com/question/30154483
#SPJ11
You need to prepare a solution with a pH of 8, using NaF and HF. What ratio of [base]/[acid] should be used in making the buffer? Please show work
1) [base]/[acid] = 2.36
2) [base]/[acid] = 7.20
3) [base]/[acid] = 0.14
4) [base]/[acid] = 4.86
5) None of the above ratios is correct.
To prepare a buffer solution with a pH of 8 using NaF and HF, we need to use the Henderson-Hasselbalch equation, which relates the pH of a buffer to the pKa of the weak acid and the ratio of its conjugate base (salt) and acid concentrations:
pH = pKa + log([base]/[acid])
We are given that the pH of the buffer solution should be 8. The pKa of HF is 3.17, so we can calculate the [base]/[acid] ratio as follows:
8 = 3.17 + log([base]/[acid])
4.83 = log([base]/[acid])
Taking the antilogarithm (base 10) of both sides, we get:
[base]/[acid] = 10^4.83
[base]/[acid] = 7.20
Therefore, the correct answer is (2) [base]/[acid] = 7.20.
To know more about prepare refer here
https://brainly.com/question/14523611#
#SPJ11
draw the structure(s) of all of the branched alkene isomers, c6h12, that contain 2 methyl branches.
The main answer to your question is that there are four possible branched alkene isomers of C6H12 that contain 2 methyl branches. The structures of these isomers are:
1) 2-methyl-1-butene: CH3-CH=CH-CH2-CH3
2) 3-methyl-1-butene: CH3-CH2-CH=CH-CH3
3) 2-methyl-2-butene: CH3-CH=CH-CH(CH3)-CH3
4) 3-methyl-2-butene: CH3-CH2-CH=CH-CH(CH3)-CH2-
An explanation of why there are four possible isomers can be attributed to the different positions the two methyl branches can occupy on the parent chain. The parent chain in this case is a butene, which contains four carbon atoms and one double bond. The methyl groups can either be on the same carbon atom (resulting in a symmetrical molecule), or on adjacent carbon atoms (resulting in an asymmetrical molecule). The position of the double bond remains constant in all isomers.
For more information on branched alkene isomers visit:
https://brainly.com/question/15708359
#SPJ11