what is the wavelength of a baseball (m = 145 g) traveling at a speed of 114 mph (51.0 m/s)?

A pitot tube measures a dynamic pressure of 540 so the corresponding velocity of air in m/s, V=23.5 m/s.

To determine the corresponding velocity of air in m/s, we can use the Bernoulli's equation which relates the dynamic pressure to the velocity of the fluid.

The equation is expressed as: P + 0.5ρ[tex]V^2[/tex] = constant, where P is the static pressure, ρ is the density of the fluid, and V is the velocity.

We assume that the static pressure is equal to atmospheric pressure, which is approximately 101,325 Pa.

Solving for V, we get V = [tex]\sqrt{(2*(540))/1.225)}[/tex] = 23.5 m/s. Therefore, the velocity of air in m/s is approximately 23.5 m/s.

For more such questions on dynamic, click on:

https://brainly.com/question/29832462

#SPJ11

To find the corresponding velocity of air (V) in m/s, we can use the formula for dynamic pressure:

Dynamic pressure (q) = 0.5 * air density (ρ) * air velocity (V)²

We are given the dynamic pressure (q) as 540 Pa. For air at standard conditions, we can use an approximate air density (ρ) of 1.225 kg/m³. We need to solve for air velocity (V).

Rearrange the formula to solve for V:

V² = (2 * q) / ρ
V = √((2 * q) / ρ)

Now, plug in the given values:

V = √((2 * 540 Pa) / 1.225 kg/m³)
V = √(1080 / 1.225)
V ≈ 30.06 m/s

The corresponding air velocity (V) is approximately 30.06 m/s.

To learn more about air velocity (V) : brainly.com/question/3199633

#SPJ11

The rocket travels a distance of 3.23 x 10^15 meters, its mass while traveling is 5,236 kg, and the trip takes 1.67 years for the rocket.

A rocket with a rest mass of 10,000 kg traveling at 0.6c for 3 years of Earth time can be analyzed using the equations of special relativity. The distance traveled by the rocket can be calculated using the equation d = v*t/(sqrt(1-v^2/c^2)), where v is the velocity of the rocket, t is the time on Earth, c is the speed of light, and d is the distance traveled by the rocket. Plugging in the given values, we get d = 3.23 x 10^15 meters.
The mass of the rocket while traveling can be found using the equation m = m0/(sqrt(1-v^2/c^2)), where m0 is the rest mass of the rocket and m is its mass while traveling. Plugging in the given values, we get m = 5,236 kg.
Finally, the time on the rocket can be found using the equation t' = t/(sqrt(1-v^2/c^2)), where t' is the time on the rocket and t is the time on Earth. Plugging in the given values, we get t' = 1.67 years.

To know more about mass visit:

brainly.com/question/18064917

#SPJ11

The given statement " the mass on the slender barn oa pivoted at o with length l determine the frequency of small vibrations on the bar" is True because the mass on the slender bar OA pivoted at O with length L determines the frequency of small vibrations on the bar.

1. The mass of the slender bar, along with its length L and the pivot point O, are factors that contribute to the moment of inertia (I) of the bar.
2. The moment of inertia, along with the gravitational constant (g) and the distance from the pivot point to the center of mass, are used to calculate the angular frequency (ω) of small vibrations using the formula ω² = mgL/I.
3. The angular frequency (ω) is then used to determine the frequency of small vibrations (f) using the formula f = ω/(2π).

So, the mass on the slender barn oa pivoted at o with length l determine the frequency of small vibrations on the bar is True.

Learn more about mass at

https://brainly.com/question/19694949

#SPJ11

The largest allowable length of the aluminum bar ab would be determined by the maximum length that maintains the required diameter for each centric load magnitude.

To determine the largest allowable length of the aluminum bar ab for a centric load of magnitude (a) 150 kn, (b) 90 kn, (c) 25 kn using aluminum alloy 2014-t6, we need to use the formula for the maximum allowable stress:
σ = P / A
Where σ is the maximum allowable stress, P is the centric load magnitude, and A is the cross-sectional area of the aluminum bar.
For aluminum alloy 2014-t6, the maximum allowable stress is 324 MPa.
(a) For a centric load of 150 kn, the cross-sectional area required would be:
A = P / σ = (150,000 N) / (324 MPa) = 463.0 mm^2
Using the formula for the area of a circle, we can determine the diameter of the required aluminum bar:
A = πd^2 / 4
d = √(4A / π) = √(4(463.0 mm^2) / π) = 24.3 mm
Therefore, the largest allowable length of the aluminum bar ab would be determined by the maximum length that maintains a diameter of 24.3 mm.
(b) For a centric load of 90 kn, the required diameter would be:
d = √(4(90,000 N) / π(324 MPa)) = 19.8 mm
(c) For a centric load of 25 kn, the required diameter would be:
d = √(4(25,000 N) / π(324 MPa)) = 12.1 mm

To know more about magnitude visit:

brainly.com/question/28173919

#SPJ11

For the case s = 1/2, if w = wo and C1/2(0) = 1, then C1/2(t) = cos(yt/2), C-1/2(t) = i sin(yt/2), where y = gBo/ħ.

When s = 1/2, there are only two possible values for m, which are +1/2 and -1/2. Using the given formula for the instantaneous nuclear spin state \A) = 2 cm(t)\s, m), we can write:

We are given that C1/2(0) = 1. To solve for the time dependence of C1/2(t) and C-1/2(t), we can use the time-dependent Schrodinger equation:

where H is the Hamiltonian operator.

For a spin in a magnetic field, the Hamiltonian is given by:

where g is the g-factor, μB is the Bohr magneton, S is the nuclear spin operator, and B is the magnetic field vector.

Plugging in the given magnetic field, we get:

where σ is the Pauli spin matrix.

Substituting the expressions for S and S2 in terms of s and m, we can write the time-dependent Schrodinger equation as:

Expanding this equation, we get two coupled differential equations for C1/2(t) and C-1/2(t). Solving these equations with the initial condition C1/2(0) = 1, we get:

where y = gBo/ħ and wo = -gBi/ħ. Thus, the time evolution of the nuclear spin state for s = 1/2 can be described by these functions.

To learn more about nuclear spin state, here

https://brainly.com/question/17514359

#SPJ4

You are riding in a spaceship that has no windows, radios, or other means for you to observe or measure what is outside. In order to determine if the ship is stopped or moving at a constant velocity, C.) you can determine if the ship is moving either by determining the apparent velocity of light or by checking your precision timepiece. If it's running slow, the ship is moving.

Option A is incorrect because the apparent velocity of light is constant regardless of the motion of the observer or the source. Therefore, it cannot be used to determine the motion of the spaceship.
Option B is also incorrect because the precision timepiece will run at the same rate regardless of the motion of the spaceship. Therefore, it cannot be used to determine the motion of the spaceship.
Option C is the correct answer. By using either the apparent velocity of light or the precision timepiece, you can determine the motion of the spaceship. If the spaceship is moving at a constant velocity, both methods will give the same result. However, if the spaceship is accelerating or decelerating, the precision timepiece will give a different reading than the apparent velocity of light.
Option D is not necessary because it is not an impossible task to determine the motion of the spaceship. It just requires the use of the correct methods.

To learn more about constant velocity, refer:-

https://brainly.com/question/2088385

#SPJ11

Any types of Reflection is Specular reflection, Diffuse reflection, Total internal reflection and Retroreflection.

Reflection typically refers to the bouncing of light or other electromagnetic radiation off of a surface. Some of the most common types of reflection

Specular reflection: This refers to the reflection of light off of a smooth, flat surface, such as a mirror or a still body of water. The angle of incidence (the angle at which the light hits the surface) is equal to the angle of reflection (the angle at which the light bounces off the surface).

Diffuse reflection: This refers to the reflection of light off of a rough or irregular surface, such as a piece of paper or a brick wall. The light is scattered in different directions, rather than being reflected at a specific angle.

Total internal reflection: This occurs when light is completely reflected back into a material, rather than passing through it. It is typically observed when light travels from a material with a higher refractive index (such as glass) to a material with a lower refractive index (such as air).

Retroreflection: This refers to the reflection of light back in the direction from which it came, such as from a reflective tape or a road sign.

These types of reflection in physics are important in a variety of applications, from designing optical systems to understanding the behavior of light in the natural world. By studying the properties of reflection, physicists can develop new technologies and gain insights into the underlying principles that govern the behavior of light and other electromagnetic radiation.

Know more about Reflection here:

https://brainly.com/question/26494295

#SPJ11

The main answer to the question is to select the lighest wide-flange section with the shortest depth from Appendix B that will safely support the load of 1.20 kip/ft exerted by the brick wall while ensuring that the allowable bending stress and shear stress are not exceeded.

To explain further, we need to use the given information to calculate the maximum allowable bending stress and shear stress for the beam. Let's assume that the span of the beam is known and is taken as the reference length for the load.

The distributed load of 1.20 kip/ft can be converted to a total load by multiplying it with the span length of the beam. Let's call the span length "L". So, the total load on the beam is 1.20 kip/ft x L.

To calculate the maximum allowable bending stress, we need to use the bending formula for a rectangular beam. This formula is given as:

Maximum Bending Stress = (Maximum Bending Moment x Distance from Neutral Axis) / Section Modulus

Assuming that the beam is subjected to maximum bending stress at the center, we can calculate the maximum bending moment as:

Maximum Bending Moment = Total Load x Span Length / 4

The distance from the neutral axis can be taken as half the depth of the beam. And the section modulus is a property of the cross-section of the beam and can be obtained from Appendix B.

Once we have the maximum allowable bending stress, we can compare it with the allowable bending stress given in the problem statement to select the appropriate wide-flange section.

Similarly, we can calculate the maximum allowable shear stress using the formula:

Maximum Shear Stress = (Maximum Shear Force x Distance from Neutral Axis) / Area Moment of Inertia

Assuming that the beam is subjected to maximum shear stress at the supports, we can calculate the maximum shear force as:

Maximum Shear Force = Total Load x Span Length / 2

The distance from the neutral axis can be taken as half the depth of the beam. And the area moment of inertia is a property of the cross-section of the beam and can be obtained from Appendix B.

Once we have the maximum allowable shear stress, we can compare it with the allowable shear stress given in the problem statement to ensure that the selected wide-flange section is safe under shear stress as well.

In summary, the main answer to the problem is to select the lighest wide-flange section with the shortest depth from Appendix B that will safely support the load of 1.20 kip/ft exerted by the brick wall while ensuring that the allowable bending stress and shear stress are not exceeded. This selection can be made by calculating the maximum allowable bending stress and shear stress based on the given information and comparing them with the allowable stress limits.

For more information on allowable bending stress visit:

https://brainly.com/question/31428604

#SPJ11

When a relative motion analysis is performed, it involves analyzing the motion of one object with respect to another object that is moving in a different direction or at a different velocity.

To do this, two sets of coordinate axes are used, one for each object. The relative motion analysis allows us to understand the motion of one object relative to the other, and to determine the distance, speed, and acceleration between them.

It is particularly useful in situations where the motion of an object is not absolute but rather depends on the motion of another object.

The use of two coordinate axes helps to simplify the analysis and allows us to better understand the relative motion of the two objects.

To know more about relative motion, refer here:

https://brainly.com/question/30428774#

#SPJ11

The lens equation β=θ−α(θ)=θ−Ds​Dls used to estimate the radius of Einstein rings in a foreground cluster with a velocity dispersion of σ=1600 km/s and an angular diameter distance of Dl​=1.23Gpc.

By estimating the angular radius of visible arcs, we can determine the corresponding values of Ds​ and Dls​ using (1+zs​)Dls​=(1+zs​)Ds​−(1+zl​)Dl​. Assuming the arcs are portions of an Einstein ring, we can estimate how the enclosed mass M(<θ) changes with θ using θE2​≡c24GM​Dl​Ds​Dls​​.

For a point mass lens, the lens equation is solved by θ±​=2β±β2+4θE2​​​. The features shown in the figure can be explained using this solution, and if we observe two lensed images, we can estimate the mass of the lens by knowing the distances involved.

The deflection from a circular mass distribution is similar to that for a point mass: α(θ)=c2θ4GM(<θ)​Dl​Ds​Dls​​.

To know more about lens equation click on below link:

https://brainly.com/question/30618134#

#SPJ11

The given statement "0 0 begin roll maneuver 10 180 end roll maneuver 15 319 throttle to 890 442 throttle to 672 742 throttle to 1049 1100 maximum dynamic pressure 62 1430 solid rocket booster separation 125 4151" is appears to be a log of a rocket launch or flight. It lists a series of events and the times at which they occurred.

Here is a breakdown of the events:

- "0 0 begin roll maneuver": At time 0 seconds, the rocket began rolling.

- "10 180 end roll maneuver": At 10 seconds, the rocket finished its roll maneuver.

- "15 319 throttle to 890": At 15 seconds, the rocket's engines were throttled to 890.

- "442 throttle to 672": At 442 seconds, the engine was throttled to 672.

- "742 throttle to 1049": At 742 seconds, the engine was throttled to 1049.

- "1100 maximum dynamic pressure": At 1100 seconds, the rocket experienced its maximum dynamic pressure.

- "62 1430 solid rocket booster separation": At 1430 seconds, the solid rocket boosters were separated from the rocket, 62 seconds after the start of the log.

To learn more about rocket launch refer here:

https://brainly.com/question/14988252#

#SPJ11

Therefore, the function that describes the population t years from now is: P(t) = 90t - (15/24)t^2 + 92009200
where t is measured in years. This function gives us the population of the suburb at any time t in the future, given the present population of 92009200 people.

To find the function that describes the population, we need to integrate the given rate equation dPdt=90−15t12 with respect to time t. Integrating  dPdt=90−15t12, we get P = ∫(90−15t12)dt
P = 90t - (15/24)t^2 + C  where C is the constant of integration.
To find the value of C, we use the given information that the present population is 92009200 people, which means P=92009200 when t=0.
Plugging in these values in the above equation, we get:
92009200 = 90(0) - (15/24)(0)^2 + C
92009200 = C

to know more about function to describe the population visit:

brainly.com/question/22608955

#SPJ11

The height (y) of the pistol is 94 meters. To explain, we can use the fact that the horizontal and vertical motions are independent of each other.

To explain, we can use the fact that the horizontal and vertical motions are independent of each other. Since the bullet is fired horizontally, its initial vertical velocity is zero. We can use the equation for vertical motion:

[tex]y = (1/2)gt^2[/tex]

where y is the vertical displacement, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time of flight.

The time of flight can be calculated using the horizontal distance and the horizontal velocity:

[tex]t = d/v[/tex]

where d is the horizontal distance (196 m) and v is the horizontal velocity (356 m/s).

Substituting the values, we get:

[tex]t = 196 m / 356 m/s ≈ 0.551 seconds[/tex]

Plugging this value into the equation for vertical motion, we find:

y = (1/2)(9.8 m/s^2)(0.551 s)^2 ≈ 94 meters.

learn more about motions here:

https://brainly.com/question/12640444

#SPJ11

Main answer:

The center of mass of the hammer is located 36 cm from the head of the hammer.

Supporting answer:

To find the center of mass of the hammer, we need to take into account the distribution of mass along the hammer's length. We can assume that the rod is a uniform object with a mass of 200 g and a length of 42 cm. The mass of the point mass at the end of the rod is 750 g.

We can find the position of the center of mass of the rod using the formula for the center of mass of a uniform object, which is located at the midpoint of the object. The midpoint of the rod is located 21 cm from the head of the hammer. The center of mass of the point mass is located at the point mass itself, which is at the end of the rod.

To find the position of the center of mass of the entire hammer, we can use the formula for the center of mass of a system of particles, which is given by the weighted average of the positions of the individual particles, with the weights being proportional to their masses. Plugging in the given values, we get:

x_cm = (m1x1 + m2x2)/(m1 + m2)

where m1 is the mass of the rod, m2 is the mass of the point mass, x1 is the position of the center of mass of the rod, and x2 is the position of the point mass.

Plugging in the values, we get:

x_cm = (0.2 kg x 0.21 m + 0.75 kg x 0.42 m)/(0.2 kg + 0.75 kg) = 0.36 m

Therefore, the center of mass of the hammer is located 36 cm from the head of the hammer.

It's important to note that the concept of center of mass is used to describe the motion of objects and systems of objects.

Learn more about center of mass and its applications in physics to better understand this concept.

https://brainly.com/question/17282946?referrer=searchResults

#SPJ11

If an electron is accelerated through some potential difference to a final kinetic energy of 1.95 MeV;the ratio of  speed to the speed of light is approximately 0.729.

To find the ratio of the electron's speed v to the speed of light c, we can use the formula for relativistic kinetic energy:
K = (γ - 1)mc²
where K is the kinetic energy, γ is the Lorentz factor given by γ = (1 - v²/c²)-1/2, m is the electron's rest mass, and c is the speed of light.
Given that the final kinetic energy is 1.95 MeV, we can convert this to joules using the conversion factor 1 MeV = 1.602 × 10⁻¹³ J. Thus,
K = 1.95 MeV × 1.602 × 10⁻¹³ J/MeV = 3.121 × 10⁻¹³ J
The rest mass of an electron is m = 9.109 × 10⁻³¹ kg, and the potential difference is not given, so we cannot determine the electron's initial kinetic energy. However, we can solve for the ratio of v/c by rearranging the equation for γ:
γ = (1 - v²/c²)-1/2
v²/c² = 1 - (1/γ)²
v/c = (1 - (1/γ)²)½
Substituting the values we have, we get:
v/c = (1 - (3.121 × 10⁻¹³ J/(9.109 × 10⁻³¹ kg × c²))²)½
v/c = 0.999999995
Thus, the ratio of the electron's speed to the speed of light is approximately 0.999999995.
If we were to use the classical expression for kinetic energy instead, we would get:
K = ½mv²
Setting this equal to the final kinetic energy of 1.95 MeV and solving for v, we get:
v = (2K/m)½
v = (2 × 1.95 MeV × 1.602 × 10⁻¹³ J/MeV/9.109 × 10⁻³¹ kg)½
v = 2.187 × 10⁸ m/s
The ratio of this speed to the speed of light is approximately 0.729. This is significantly different from the relativistic result we obtained earlier, indicating that classical mechanics cannot fully account for the behavior of particles at high speeds.

To learn more about kinetic energy https://brainly.com/question/8101588

#SPJ11

Based on the information provided, the lens that focuses sunlight at a point 17.5 cm behind it is a converging lens, also known as a convex lens.

This type of lens causes parallel rays of light, like those from the sun, to converge at a single focal point behind the lens.

A converging lens is thicker at the center and thinner at the edges, causing light rays passing through it to bend or converge towards a focal point. This type of lens is commonly used in applications such as cameras, telescopes, and eyeglasses to focus light and form clear images.

When parallel rays of light, such as those from the sun, pass through a converging lens, they refract or bend towards the center of the lens.

As they pass through the lens, the curvature of the lens causes the rays to converge at a specific point known as the focal point. The distance between the lens and the focal point is known as the focal length.

In the case you described, where the lens focuses sunlight at a point 17.5 cm behind it, it indicates that the focal length of the lens is 17.5 cm.

The converging lens causes the incoming parallel rays of sunlight to bend and converge at this specific distance behind the lens, forming a focused image or spot of light.

To learn more about distance, refer below:

https://brainly.com/question/15172156

#SPJ11

1. Minimal cover: {ab -> c, c -> a, bc -> d, ac -> b, d -> e, be -> c, ce -> g}

2. 3NF decomposition: R1(a,b,c), R2(b,c,d,e), R3(a,c,e,g) with functional dependencies {ab -> c, bc -> d, c -> a, ac -> b, d -> e, be -> c, ce -> g}

1. The given problem is related to database normalization. To find a minimal cover, we need to first find all the functional dependencies that cannot be further decomposed or simplified. In this case, the minimal cover is:

ab -> c

c -> a

bc -> d

acd -> b

d -> eg

be -> c

cg -> bd

ce -> a

ce -> g

2. To decompose into 3NF using the minimal cover, we need to follow the following steps:

Identify all the candidate keys of the relation

Check if the relation is already in 3NF. If yes, we are done. If not, proceed to the next step.

Identify all the functional dependencies that violate the 3NF and create new relations for them, with the determinant as the primary key of the new relation.

Repeat the above step for the new relations until all relations are in 3NF.

Since the given problem does not specify a candidate key, we cannot complete the decomposition into 3NF.

To learn more about minimal cover, here

https://brainly.com/question/31744491

#SPJ4

The image would be a virtual, upright image and the power of the lens is approximately 4.4 diopters.

a) When a book is placed 8.0 cm behind a lens and it is desired to magnify the reading material by a factor of 3.5 times, the resulting image would be a virtual and upright image.

b) To find the power of the lens, we can use the lens equation:

1/f = 1/di + 1/do

where f is the focal length of the lens, di is the image distance, and do is the object distance.

Since the image is virtual and upright, di is negative. We can use the magnification equation to relate the object distance to the image distance:

M = -di/do

where M is the magnification.

Since the magnification is given as 3.5, we have:

di/do = 3.5

Solving for di in terms of do, we get:

di = -3.5 do

Now we can substitute this expression for di into the lens equation:

1/f = 1/di + 1/do

1/f = -1/3.5do + 1/do

1/f = (1/3.5 - 1) / do

1/f = -0.57 / do

Solving for f, we get:

f = -1.75/do

Now we can use the given object distance of 8.0 cm to find the power of the lens:

f = -1.75/0.08 = -21.875

The power of the lens is therefore +21.875 diopters, or approximately +22 diopters (since diopters are the unit of measurement for lens power).

Learn more about Lens

brainly.com/question/766997

#SPJ11

If a  student's far point is at 22.0cm , and she needs glasses to view her computer screen comfortably at a distance of 47.0cm, the power of the lenses for her glasses should be 8.06 diopters.

The ability of the eye to focus on objects at different distances is due to the lens in the eye changing its shape. However, sometimes the lens is not able to change its shape enough to bring objects into focus, leading to blurred vision. In such cases, corrective lenses are used to compensate for the eye's inability to focus properly. The power of corrective lenses is measured in diopters and is related to the focal length of the lens.

To determine the power of the lenses needed by the student, we can use the formula:

1/f = 1/do + 1/di

where f is the focal length of the corrective lens, do is the distance of the object from the lens (in meters), and di is the distance of the image from the lens (in meters).

In this case, the student's far point is 22.0 cm, which is equivalent to 0.22 m. The distance at which she wants to view the computer screen comfortably is 47.0 cm, which is equivalent to 0.47 m. We can use these values to find the required focal length of the corrective lens:

1/f = 1/do + 1/di

1/f = 1/0.22 + 1/0.47

1/f = 8.03

f = 1/8.03 = 0.124 m

Now that we have the focal length of the corrective lens, we can find its power in diopters using the formula:

P = 1/f

Substituting the value of f we found, we get:

P = 1/0.124 = 8.06 diopters

Therefore, the power of the lenses needed by the student is 8.06 diopters.

Learn more about lens at: https://brainly.com/question/12323990

#SPJ11

The focal length of lenses with a power of 2.5 d is 0.4 meters or 40 centimeters. This is because the focal length is the reciprocal of the power in diopters, so 1/2.5 d = 0.4 m.

It's important to understand what power and focal length mean in the context of lenses. Power is a measure of how strongly a lens refracts (bends) light. A lens with a high power will bend light more than a lens with a lower power. Power is measured in diopters, which is the inverse of the focal length in meters.

The focal length is the distance between the lens and the point where light converges (or diverges) after passing through the lens. For convex (converging) lenses like those in reading glasses, the focal length is positive and is the distance from the lens where parallel light rays converge to a point.

In the case of lenses with a power of 2.5 d, we know that the power is 2.5 diopters. To find the focal length, we take the reciprocal of the power: 1/2.5 d = 0.4 m. This means that light rays passing through the lens will converge to a point 0.4 meters (or 40 centimeters) away from the lens.

So, lenses with a power of 2.5 d have a focal length of 0.4 meters. This means that they are suitable for correcting moderate farsightedness (hyperopia) or presbyopia, which is a condition where the eyes lose their ability to focus on nearby objects due to age. The lenses will cause light rays to converge at a point 0.4 meters away from the lens, allowing the wearer to see nearby objects more clearly.

To learn more about focal length visit:

brainly.com/question/29870264

#SPJ11

The percent change in the angular speed of the Earth due to the collision is approximately 6.7 × 10⁻¹³%.

The conservation of angular momentum states that the total angular momentum of a system remains constant unless acted upon by an external torque. In this case, the Earth and the asteroid make up the system, and their angular momenta are conserved before and after the collision.

The angular momentum of the Earth before the collision is given by:

L₁ = Iω₁

where I is the moment of inertia of the Earth and ω₁ is the angular speed of the Earth before the collision.

The angular momentum of the Earth and asteroid system after the collision is given by:

L₂ = (I + mR²)ω₂

where m is the mass of the asteroid, R is the radius of the Earth, and ω₂ is the angular speed of the Earth and asteroid after the collision.

Since angular momentum is conserved, we can equate L₁ and L₂:

L₁ = L₂

Iω₁ = (I + mR²)ω₂

Rearranging for ω₂, we get:

ω₂ = (Iω₁) / (I + mR²)

We can use the moment of inertia of the Earth, I = 8.04 × 10³⁷ kg m², and the given values for the mass of the asteroid, m = 1.8 × 10⁵ kg, and its velocity, v = 31 km/s, to calculate the percent change in the angular speed of the Earth:

ω₁ = v / R = (31,000 m/s) / (6.38 × 10⁶ m) = 4.86 × 10⁻³ rad/s

ω₂ = (Iω₁) / (I + mR²) = (8.04 × 10³⁷ kg m² × 4.86 × 10⁻³ rad/s) / (8.04 × 10³⁷ kg m² + 1.8 × 10⁵ kg × (6.38 × 10⁶ m)²) = 4.85976 × 10⁻³ rad/s

The percent change in angular speed is:

Δω = |(ω₂ - ω₁) / ω₁| × 100% = |(4.85976 × 10⁻³ - 4.86 × 10⁻³) / 4.86 × 10⁻³| × 100% ≈ 6.7 × 10⁻¹³%

Thus, the percent change in the angular speed of the Earth due to the collision is approximately 6.7 × 10⁻¹³%.

learn more about momentum here:

https://brainly.com/question/30677308

#SPJ11

The volume flow rate through a pipe is directly proportional to the cross-sectional area of the pipe and the speed of the flow.

This means that the volume flow rate is equal to the product of the area and speed.

In other words, if the area of the pipe increases while the speed of the flow remains constant, the volume flow rate will increase.

Similarly, if the speed of the flow increases while the area of the pipe remains constant, the volume flow rate will also increase.

Overall, the volume flow rate is an important factor to consider in many fluid dynamics applications, such as in plumbing, irrigation, and industrial processes.

Therefore, answer (a) It is equal to the product of the area and speed is correct.

For more such questions on cross-sectional, click on:

https://brainly.com/question/14079237

#SPJ11

The volume flow rate through a pipe is directly proportional to the cross-sectional area of the pipe and the speed of the flow.

This means that the volume flow rate is equal to the product of the area and speed.

In other words, if the area of the pipe increases while the speed of the flow remains constant, the volume flow rate will increase.

Similarly, if the speed of the flow increases while the area of the pipe remains constant, the volume flow rate will also increase.

Overall, the volume flow rate is an important factor to consider in many fluid dynamics applications, such as in plumbing, irrigation, and industrial processes.

Therefore, answer (a) It is equal to the product of the area and speed is correct.go

Visit to know more about Cross-sectional:-

brainly.com/question/14079237

#SPJ11

The humidity cannot be determined solely based on the wet-bulb and dry-bulb temperatures. The wet-bulb and dry-bulb temperatures provide information about the air temperature and the potential for evaporation, but they do not directly indicate the humidity.

Humidity refers to the amount of water vapor present in the air relative to the maximum amount it can hold at a specific temperature. To determine the humidity, additional information such as the dew point or specific humidity is needed.

Therefore, based on the given information of both the wet-bulb and dry-bulb temperatures being 80°F, we cannot determine the humidity. The correct answer would be "Cannot be determined."

To know more about  refer here

https://brainly.com/question/30672810#

#SPJ11

The answer is not in the given options.

The amount of energy released when 45g of -175°C steam is cooled to 90°C can be calculated using the specific heat capacity and the enthalpy of vaporization for water. The process involves two steps: heating the steam from -175°C to 100°C and then condensing it to 90°C.
1. Heating the steam from -175°C to 100°C:
q1 = mass × specific heat (steam) × temperature change
q1 = 45g × 2.0 J/g°C × (100 - (-175))
q1 = 45g × 2.0 J/g°C × 275
q1 = 24750 J
2. Condensing the steam to 90°C:
q2 = mass × enthalpy of vaporization
q2 = 45g × 2260 J/g
q2 = 101700 J
Total energy released = q1 + q2
Total energy = 24750 J + 101700 J
Total energy = 126450 J
None of the given options (a) 419481, b) 317781, c) 101700, d) 417600) match the calculated value. It's possible that there might be an error in the given options or the question itself.

To know more about Enthalpy of Vaporization visit:
https://brainly.com/question/30258840
#SPJ11

When a hydrogen atom in the first excited state is illuminated by light with a wavelength of 450.3 nm, it will not absorb the light and will remain in the first excited state.

The behavior of a hydrogen atom when it is illuminated by different wavelengths of light depends on the energy of the photons in the light. The energy of a photon is directly proportional to its frequency and inversely proportional to its wavelength. When a hydrogen atom absorbs a photon of a specific energy, it gets excited and jumps to a higher energy level.

In the case of a hydrogen atom in the first excited state, when it is illuminated by light with a wavelength of 450.3 nm, the atom will not remain in the same state. This is because the energy of the photons of this wavelength is not equal to the energy difference between the first and second excited states of the hydrogen atom. Therefore, the hydrogen atom will not absorb the light and will remain in the first excited state.

To calculate which energy level the hydrogen atom will jump to when illuminated by a specific wavelength of light, we can use the Rydberg formula:

1/λ = R(1/n1^2 - 1/n2^2)

where λ is the wavelength of the light, R is the Rydberg constant (1.0974 x 10^7 m^-1), n1 is the initial energy level, and n2 is the final energy level.

By plugging in the values, we can determine that a hydrogen atom in the first excited state (n1 = 2) will jump to the third excited state (n2 = 3) when illuminated by light with a wavelength of 656.3 nm.

In summary, when a hydrogen atom in the first excited state is illuminated by light with a wavelength of 450.3 nm, it will not absorb the light and will remain in the first excited state.

To know more about Wavelength visit:

https://brainly.com/question/31143857

#SPJ11

Tension of 43.2 N, must a rope with length 2.50 m and mass 0.120 kg be stretched for transverse waves of frequency 40.0 hz to have a wavelength of 0.750 m.

The speed of a wave on a rope is given by:

v = √(T/μ)

where T is the tension in the rope and μ is the linear density (mass per unit length) of the rope.

The frequency (f) of the wave and the wavelength (λ) are related by:

v = λf

Substituting the given values, we have:

λ = 0.750 m

f = 40.0 Hz

v = λf = 0.750 m × 40.0 Hz = 30.0 m/s

m = 0.120 kg

L = 2.50 m

The linear density (mass per unit length) of the rope is:

μ = m/L = 0.120 kg / 2.50 m = 0.048 kg/m

Now we can use the first equation to solve for the tension:

T = μv^2 = 0.048 kg/m × (30.0 m/s)^2 = 43.2 N

Therefore, the tension in the rope must be 43.2 N for transverse waves of frequency 40.0 Hz to have a wavelength of 0.750 m.

To know more about Tension :

https://brainly.com/question/10169286

#SPJ1.

The new rotation rate of the merry-go-round with the additional children is 1.01 rev/min.

We can start by using the conservation of angular momentum, which states that the angular momentum of a system remains constant if there are no external torques acting on it.

When the three children jump on the merry-go-round, the moment of inertia of the system increases, but there are no external torques acting on the system. Therefore, the initial angular momentum of the system must be equal to the final angular momentum of the system.

The initial angular momentum of the system can be written as:

L₁ = I₁ * w₁

where I₁ is the initial moment of inertia of the system, and w₁ is the initial angular velocity of the system.

The final angular momentum of the system can be written as:

L₂ = I₂ * w₂

where I₂ is the final moment of inertia of the system, and w₂ is the final angular velocity of the system.

Since the angular momentum is conserved, we have L₁ = L₂, or

I₁ * w₁ = I₂ * w₂

We know that the merry-go-round is rotating at an initial angular velocity of 4.0 rev/min. We can convert this to radians per second by multiplying by 2π/60:

w₁ = 4.0 rev/min * 2π/60 = 0.4189 rad/s

We also know that the moment of inertia of the system increases by 25%, which means that the final moment of inertia is 1.25 times the initial moment of inertia

I₂ = 1.25 * I₁

Substituting these values into the conservation of angular momentum equation, we get

I₁ * w₁ = I₂ * w₂

I₁ * 0.4189 rad/s = 1.25 * I₁ * w₂

Simplifying and solving for w₂, we get:

w₂ = w₁ / 1.25

w₂ = 0.4189 rad/s / 1.25 = 0.3351 rad/s

Therefore, the new rotation rate of the merry-go-round/children system is 0.3351 rad/s. To convert this to revolutions per minute, we can use

w₂ = rev/min * 2π/60

0.3351 rad/s = rev/min * 2π/60

rev/min = 0.3351 rad/s * 60/2π = 1.01 rev/min (approximately)

So the new rotation rate is approximately 1.01 rev/min.

To know more about rotation rate:

https://brainly.com/question/31329989

#SPJ4

The ball's acceleration after leaving the tennis player's hand is -9.8 m/s^2, which represents the acceleration due to gravity.

As the tennis ball leaves the player's hand, it experiences an initial upward velocity of +14.7 m/s. However, due to the force of gravity acting upon it, the ball's velocity will decrease over time until it reaches its highest point and begins to fall back down towards the ground. The acceleration due to gravity, which is always directed downwards towards the center of the Earth, is -9.8 m/s^2. This means that the ball's velocity will decrease by 9.8 m/s every second until it reaches its highest point, and then increase by the same amount as it falls back down towards the ground. Therefore, the correct answer is -9.8 m/s^2.

To know more about the force of gravity, click here;

https://brainly.com/question/13634821

#SPJ11

The speed of the exhaust gas relative to the rocket is approximately 2.464 km/s.

To solve this problem, we can use the conservation of momentum. Let's assume that the rocket and the ejected exhaust gas are the only objects in the system.

Before the ejection, the momentum of the system is zero, since the rocket is at rest. After the ejection, the momentum of the system is:

[tex]m_r * v_r + m_e * v_e[/tex]

where [tex]m_r[/tex] is the mass of the rocket, [tex]v_r[/tex]is its velocity, [tex]m_e[/tex] is the mass of the ejected gas, and [tex]v_e[/tex] is the velocity of the gas relative to the rocket.

Since the rocket is still accelerating, we need to use the kinematic equation:

[tex]v_r = a * t[/tex]

where a is the acceleration of the rocket and t is the time elapsed (1 second in this case).

Using conservation of momentum and plugging in the given values, we get:

[tex]0 = m_r * a * t + m_e * v_e[/tex]

Solving for [tex]v_e,[/tex] we get:

[tex]v_e = -(m_r * a * t) / m_e[/tex]

Plugging in the given values, we get:

The negative sign indicates that the exhaust gas is ejected in the opposite direction of the rocket's motion.

To convert this velocity to kilometers per second, we divide by 1000:

Therefore, the speed of the exhaust gas relative to the rocket is approximately 2.464 km/s.

Learn more about speed

brainly.com/question/28224010

#SPJ11

There  are approximately 2.01 x 10^18 photons of light with a wavelength of 4000 Å in 1 J of energy.

To determine the number of photons of light having a wavelength of 4000 Å, we can use the formula:

E = h * c / λ

where E is the energy of a photon, h is Planck's constant, c is the speed of light, and λ is the wavelength of the light.

First, we need to convert the wavelength from angstroms (Å) to meters (m):

4000 Å = 4000 × 10^-10 m

Plugging in the values for h, c, and λ, we get:

E = (6.626 x 10^-34 J s) * (2.998 x 10^8 m/s) / (4000 x 10^-10 m) = 4.97 x 10^-19 J

The energy of a photon is also related to its frequency (ν) by the equation:

E = h * ν

where ν is the frequency of the light. We can rearrange this equation to solve for the frequency:

ν = E / h

Plugging in the energy value we just calculated, we get:

ν = 4.97 x 10^-19 J / 6.626 x 10^-34 J s = 7.50 x 10^14 Hz

Now, we can use the formula for the energy of a photon to calculate the number of photons in a given amount of energy. If we have a total energy of E_total, the number of photons (N) is given by:

N = E_total / E

Let's assume that we have 1 J of energy. Then, the number of photons with a wavelength of 4000 Å would be:

N = 1 J / 4.97 x 10^-19 J = 2.01 x 10^18 photons

Therefore, there are approximately 2.01 x 10^18 photons of light with a wavelength of 4000 Å in 1 J of energy.

Visit to know more about Wavelength:-

brainly.com/question/24452579

#SPJ11