Answer: The mass of [tex]CO_2[/tex] and [tex]H_2O[/tex] produced are 336.6 g and 183.6 g respectively.
Explanation:
The combustion reaction between propane and oxygen leads to formation of carbon dioxide and water.
Law of Conservation of mass states that the mass will remain constant for a balanced equation. This is carried out when the total number of atoms on reactant side is same as the total number of atoms on the product side. Thus the equation must be balanced.
[tex]C_3H_8+5O_2\rightarrow 3CO_2+4H_2O[/tex]
a) 1 mol of propane produces = 3 moles of [tex]CO_2[/tex]
Thus 2.55 mol of propane produces = [tex]\frac{3}{1}\times 2.55=7.65 moles of [tex]CO_2[/tex]
mass of [tex]CO_2=moles\times {\text {molar mass}}=7.65mol\times 44g/mol=336.6g[/tex]
b) 1 mol of propane produces = 4 moles of [tex]H_2O[/tex]
Thus 2.55 mol of propane produces = [tex]\frac{4}{1}\times 2.55=10.2 moles of [tex]H_2O[/tex]
mass of [tex]H_2O=moles\times {\text {molar mass}}=10.2mol\times 18g/mol=183.6g[/tex]
The mass of [tex]CO_2[/tex] and [tex]H_2O[/tex] produced are 336.6 g and 183.6 g respectively.
Help me out ! What’s the answer
Answer:
true
Explanation:
What is an oceanographer likely to find in a typical sample of salt water from the
ocean floor?
Water with high salt content, low in temperature, and low in density.
Water with average salt content, high in temperature, and high in density.
Water with high salt content, high in temperature, and high in density.
Water with high salt content, low in temperature, and high in density.
Explanation:
the oceanographic is likely to find water with high salt content, low in temperature and high in density
Water with high salt content, low in temperature, and high in density likely to find in a typical sample of salt water from the ocean floor. Therefore, the correct option is option D.
What is an oceanography?Oceanography, also known as oceanology as well as ocean science, is indeed the scientific paper of the seas. The term is derived from the Ancient Greek words "ocean" (v) and "writing" (graph), respectively.
Geophysical fluid dynamics, plate tectonics, the geology of the ocean floor, and fluxes of different chemical compounds and physical qualities both inside and across the ocean are all factors that affect waves and ocean currents. Water with high salt content, low in temperature, and high in density likely to find in a typical sample of salt water from the ocean floor.
Therefore, the correct option is option D.
To know more about oceanography, here:
https://brainly.com/question/13276902
#SPJ5
The ground -state electron configuration contains 6p unpaired electrons .
The electronic configuration is the depiction of the electron present in the atomic shells. The ground-state electron configuration containing three unpaired 6p electrons is bismuth.
What is electronic configuration?The electronic configuration is said to be the representation of the distribution of the electrons in the orbitals or the sub-shell of the atom. It shows the arrangement from the lower to higher energy levels.
The element which contained an unpaired 6p electron is bismuth (Bi). It has an atomic number, 83, and an electron configuration: [Xe] 4f¹⁴5d¹⁰6s²6p³. The p orbital can accommodate six electrons and hence the three electrons are unpaired.
Therefore, in the electronic configuration with unpaired 3p orbitals, the element will be bismuth.
Learn more about electron configuration, here:
https://brainly.com/question/17521393
#SPJ2
Your question is incomplete, but most probably your full question was, The ground-state electron configuration contains three unpaired 6p electrons, what is the element symbol?
Describe the process for the separation of water and water soluble matter.
Sive an important difference of each of the following pair.
Solid and liquid
b. Liquid and gas
Solid and gas
d. Melting and freezing
Vapourization and condensation. f. Melting and sublimation.
Filtration and evaporation, 1. Sedimentation and decantation,
Homogeneous and heterogenous mixture
Water insoluble and water soluble matter
Write T for true and F for false statements.
All matters are visible.
Air is a matter.
The tiny particles of matter are called molecule.
தங்கம்
Answer:
Describe the process for the separation of water and water soluble matter.
Sive an important difference of each of the following pair.
Solid and liquid
b. Liquid and gas
Solid and gas
d. Melting and freezing
Vapourization and condensation. f. Melting and sublimation.
Filtration and evaporation, 1. Sedimentation and decantation,
Homogeneous and heterogenous mixture
Water insoluble and water soluble matter
Write T for true and F for false statements.
All matters are visible.
Air is a matter.
The tiny particles of matter are called molecule.
தங்கம்
describe how the root systems of the mesquite tree and saguaro cactus root systems different. PLZ help me
Answer:
the mesquite trees roots go down into the grown, while the saguaro cactus is going to the sides.
analyze how animals benefit from the process of photosynthesis in plants
Answer:
Animals benefit from photosynthesis, because they consume the plants and therefore the sugars stored in the plants from the process of photosynthesis for energy
Explanation:
Write the empirical formula of at least four binary ionic compounds that could be formed from the following ions:
Mg2+, V5+, Br-, S2-
Answer: [tex]MgS[/tex], [tex]MgBr_2[/tex], [tex]V_2S_5[/tex] and [tex]VBr_5[/tex] are four binary ionic compounds that could be formed.
Explanation:
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
Mg is having an oxidation state of +2 called as [tex]Mg^{2+}[/tex] cation and [tex]S^{2-}[/tex] is an anion with oxidation state of -2. Thus they combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral [tex]MgS[/tex]. Also [tex]Mg^{2+}[/tex] cation and [tex]Br^{-}[/tex] can combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral [tex]MgBr_2[/tex].
Also Vanadium is having an oxidation state of +5 called as [tex]V^{5+}[/tex] cation and [tex]S^{2-}[/tex] is an anion with oxidation state of -2. Thus they combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral [tex]V_2S_5[/tex]. Also [tex]V^{5+}[/tex] cation and [tex]Br^{-}[/tex] anion can combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral [tex]VBr_5[/tex].
A 508-g sample of sodium bicarbonate (NaHCO3) contains how many moles of sodium bicarbonate (NaHCO3)?
molar mass = (22.99) + (1.01) + (12.01) + 3(16.00)
molar mass = 84.01 g/mol
//
(508g)(1 mol/84.01 g) = 6.0
There are 6.0 moles of sodium bicarbonate
A 508-g sample of sodium bicarbonate (NaHCO3) contains 0.6 moles of sodium bicarbonate (NaHCO3)
What is mass?Mass is defined as a dimensionless quantity representing the amount of matter in a particle or object. The SI unit of mass is kg.
Mole is defined as a standard scientific unit for measuring large quantities of very small entities
Molar mass = 22.99 + 1.01 + 12.01 + 3x16.00
= 84.01 g/mole
Moles of NaHCO3
= 508 g x 1 mole / 84.01
= 6.0 moles
Thus, 508-g sample of sodium bicarbonate (NaHCO3) contains 0.6 moles of sodium bicarbonate (NaHCO3)
To learn more about mass, refer to the link below:
https://brainly.com/question/19694949
#SPJ2
In an experiment, 20cm^3 of 0.2dm^3 NaOH reacted with 32.0cm^3 of H2SO4 solution. Calculate the concentration of the H2SO4 in a) mol dm^-3 and b) g dm^-3
Answer:
A. 0.0625 moldm¯³
B. 6.125 gdm¯³
Explanation:
We'll begin by writing the balanced equation balance equation for the reaction. This is illustrated below:
2NaOH + H₂SO₄ —> Na₂SO₄ + 2H₂O
From the balanced equation above,
The mole ratio of the acid, H₂SO₄ (nₐ) = 1
The mole ratio of the base, NaOH (n₆) = 2
A. Determination of the concentration of the acid in moldm¯³.
Volume of base, NaOH (V₆) = 20 cm³
Concentration of base, NaOH (C₆) = 0.2 moldm¯³
Volume of acid, H₂SO₄ (Vₐ) = 32 cm³
The mole ratio of the acid, H₂SO₄ (nₐ) = 1
The mole ratio of the base, NaOH (n₆) = 2
Concentration of acid, H₂SO₄ (Cₐ) =?
CₐVₐ / C₆V₆ = nₐ / n₆
Cₐ × 32 / 0.2 × 20 = 1 / 2
Cₐ × 32 / 4 = 1 / 2
Cross multiply
Cₐ × 32 × 2 = 4 × 1
Cₐ × 64 = 4
Divide both side by 64
Cₐ = 4 / 64
Cₐ = 0.0625 moldm¯³
Therefore, concentration of the acid in moldm¯³ is 0.0625 moldm¯³
B. Determination of the concentration of the acid in gdm¯³.
Concentration (moldm¯³) = 0.0625 moldm¯³
Concentration (gdm¯³) =?
Next, we shall determine the molar mass of the acid, H₂SO₄. This can be obtained as follow:
Molar mass of H₂SO₄ = (2×1) + 32 + (4×16)
= 2 + 32 + 98
= 98 g/mol
Finally, we shall determine the concentration of the acid in gdm¯³. This can be obtained as follow:
Concentration (moldm¯³) = 0.0625 moldm¯³
Molar mass of H₂SO₄ = 98 g/mol
Concentration (gdm¯³) =?
Conc. (moldm¯³) = conc. (gdm¯³) / Molar mass
0.0625 = Conc. (gdm¯³) / 98
Cross multiply
Conc. (gdm¯³) = 0.0625 × 98
Conc. (gdm¯³) = 6.125 gdm¯³
Thus, the concentration of the acid in gdm¯³ is 6.125 gdm¯³
What is the formula for Pentasulfur heptaoxide
Answer:
S5O7
Explanation:
9-fluorenone was isolated and purified from a crude mixture containing chloroanilic acid and benzocaine dissolved in diethyl ether. Arrange the various steps carried out experiment:
a. Drain off the remaining organic from the tip of the separatory funnel
b. Weight out the product and determine Its MP
c. Mix/vent then drain off the organic layer
d. Add sodium sulfate to the aqueous layer to remove aw residua' water
e. Add the crude reaction mixture to the separatory funnel
f. Extract chloroaniIic acid by adding 5%. HCl solution to the crude reaction mixture
g. Extract benzociane by adding 5% HCI solution to the crude reaction mixture
h. Decant the into a round bottom flask and use the rotavap to evaporate solvent
i. Extract benzociane by adding 5% NaOH solution to the organic layer
j. Extract chloroanilic acid by 5% NaOH to to organic War
k. Add sodium sulfate to the organic layer to remove any residual water
l. Mix/vent then drain off the aqueous layer
Answer:
Explanation:
[tex]\text{The steps shown below indicate the rearrangement of the experiment.}[/tex]
[tex]\text{e. Add the crude reaction mixture to the separatory funnel}[/tex]
[tex]\text{f. Extract chloroaniIic acid by adding 5\%. HCl solution to the crude reaction mixture }[/tex]
[tex]\text{l. Mix/vent then drain off the aqueous layer}[/tex]
[tex]\text{i. Extract benzociane by adding 5\% NaOH solution to the organic layer}[/tex]
[tex]\text{c. Mix/vent then drain off the organic layer}[/tex]
[tex]\text{d. Add sodium sulfate to the aqueous layer to remove aw residual water}[/tex]
[tex]\text{a. Drain off the remaining organic from the tip of the separatory funnel}[/tex]
[tex]\text{h. Decant the into a round bottom flask and use the rotavap to evaporate solvent}[/tex]
[tex]\text{b. Weight out the product and determine Its MP}[/tex]
Which is an acceptable Lewis structure for a diatomic nitrogen molecule?
OA NEN
OB.
N
N
O C.
:N
N:
OD.
NEN
OENEN
Answer:
:N:::N:
Explanation: 10 valence electrons betwwen the 2
need an octet
and N needs 5 for a neutral formal charge
An acceptable Lewis structure for a diatomic nitrogen molecule is
:N:::N: .Option C is correct. This is further explained below.
What is Lewis structure for a diatomic nitrogen molecule?Lewis structure for a diatomic nitrogen molecule simply refers to the triple bond exists between two nitrogen atoms in the N2 Lewis structure.
In conclusion, The nitrogen molecule is diatomic, which means it is made up of two atoms of the same element.
Read more about Molarity
https://brainly.com/question/9149034
#SPJ5
What happens when an electron jumps from energy level 1 to energy level 2 in an atom?
A taco from a fast food restaurant contains 7.0 g of fat, 25. g of carbohydrate, and 11 g of protein. How many kJ of energy does the cheeseburger contain? (The caloric values for foods are 38 kJ/g for fat, for carbohydrate, and 17 kJ/g for protein.)
Answer: 878 kJ of energy is there in cheeseburger
Explanation:
Given : calorific value of fat = 38kJ/g
calorific value of carbohydrate = 17 kJ/g
calorific value of protein = 17kJ/g
1 g of fat contains energy = 38 kJ
7.0 g of fat contains energy = [tex]\frac{38}{1}\times 7.0=266 kJ[/tex]
1 g of carbohydrate contains energy = 17 kJ
25 g of fat contains energy = [tex]\frac{17}{1}\times 25=425kJ[/tex]
1 g of protein contains energy = 17 kJ
11 g of protein contains energy = [tex]\frac{17}{1}\times 11=187kJ[/tex]
Total energy = (266+425+187) kJ = 878 kJ
What causes red blood cells to become sickle-shaped in a person with sickle
cell anemia?
A. Inheriting a specific gene
B. Eating a diet lacking a specific vitamin
C. Breathing in a specific pathogen
D. Touching a specific plant toxin
Answer:
A. Inheriting a specific gene
Explanation:
I hope this helps! ^^
☁️☁️☁️☁️☁️☁️☁️
Answer:
A. inheriting a specific gene
Explanation:
because sickle cell anemia is caused by a mutation in the gene responsible for making hemoglobin that makes blood red and enable the rbcs to carry o2 from lungs to the whole body.
but both mother and father must pass the defective gene to the child to be sick with sickle cell anemia otherwise the child will carry the gene but shows no sign of the anemia.
What are simple sugars
Answer:
Simple sugars are a type of carbohydrate.
Explanation:
Carbohydrates are one of the three basic macronutrients — the other two being protein and fat. Simple sugars are found naturally in fruits and milk, or they can be produced commercially and added to foods to sweeten, prevent spoilage, or improve structure and texture.
WRITE A 3-4 SENTENCE SUMMARY ABOUT ATOMS.
Answer:
An atom is the smallest unit of matter that retains all of the chemical properties of an element. Atoms combine to form molecules, which then interact to form solids, gases, or liquids. For example, water is composed of hydrogen and oxygen atoms that have combined to form water molecules.
Explanation:
Answer:
Atom is the smallest particle in the universe. An atom is made up of sub-atomic particles. They are the protons (positively charged particle), electrons (negatively charged particles) and neutrons neutrally charged particles). The lightest atom ever known is Hydrogen atom. An atom is electrically neutral. When a atom looses or gains and electrons it is called an ions.
What does it mean for heat to be transferred by thermal conduction?
Answer:
thermal energy
Explanation:
Thermal conduction is the diffusion of thermal energy (heat) within one material or between materials in contact. The higher temperature object has molecules with more kinetic energy; collisions between molecules distributions this kinetic energy until an object has the same thermal energy throughout.
Answer:
energy is transferred when one molecule collides with another.
Explanation:
aP33x
Why do the oil and vinegar separate into layers when they are stirred together, but completely mix when lecithin is stirred in?
Answer:
See explanation
Explanation:
Vinegar and oil have different densities, as such we expect the two substances to separate when mixed. However, oil constitutes the organic phase(water insoluble) while vinegar constituents the aqueous phase since it is water soluble. Therefore, the two substances separate into layers when left to stand for a while.
The structure of lecithin makes it a good emulsifier. Hence, it can be able to cause oil and vinegar to mix, constituting a single phase when lecithin is stirred in.
Vinegar molecules and oil molecules are not attracted to one another. Lecithin is attracted to both vinegar molecules and oil molecules. Due to this attraction, lecithin can cause vinegar and oil to mix evenly.
Due to their immiscibility, oil and vinegar separate into layers when they are mixed together. Oil is non-polar, but vinegar (which is acetic acid that has been diluted) is polar. Because of their different polarity, these compounds are said to be "immiscible," which means they do not mix well or create a stable solution when combined. When you stir oil and vinegar together, the agitation causes them to mix to some extent at first, but the various interactions between their molecules cause them to quickly separate into distinct layers.
To know more about miscibility, here:
https://brainly.com/question/30530422
#SPJ6
A fat is composed, in part, of long chains of carbon and hydrogen. This fat as a molecular
mass of 847 grams/mole and an empirical formula of C9H170. Determine the molecular
formula.
Answer:
[tex]C_{54}H_{102}O_6[/tex]
Explanation:
Hello!
In this case, since the molar mass of the empirical formula is:
[tex]MM_{empircal}=9*12.01+17*1.01+16.00=141.26g/mol[/tex]
Thus, the ratio of the molecular to the empirical formula is:
[tex]\frac{847g/mol}{141.26g/mol} =6.0[/tex]
Thus, the molecular formula is six times the empirical formula:
[tex]C_{54}H_{102}O_6[/tex]
Best regards!
A 1 mL sample weighs 4 g, the density of the sample is
how would you explain to an elementary school student what the periodic table is?
Answer: The periodic table is a chart where different types of elements organized by what they have in common.
Explanation:
Definition of chemical change
Answer:
Chemical changes occur when a substance combines with another to form a new substance, called chemical synthesis or, alternatively, chemical decomposition into two or more different substances. These processes are called chemical reactions and, in general, are not reversible except by further chemical reactions.
Explanation:
Which of the following is a redox reaction?
A. CuO + H2SO4 → CuSO4 + H2O
B. 3MnO2 + 4A1 3Mn + 2A120,
C. MgCO, → MgO + CO2
D. Mg(OH)2 + 2HCl → MgCl2 +H20
Answer:
a
Explanation:
the answer to the question is a
Among the following chemical equations, redox reaction is [tex]3 MnO_2+4 Al\rightarrow 3 Mn +2 Al_2O[/tex].
The redox reaction can be defined as a reaction that involves the transfer of electrons between two species. Redox reactions comprise of two parts a reduced part and an oxidized part, which occur simultaneously . The part which is reduced gain electrons and hence there is a increase in oxidation state of the species.
While, the part which is oxidized looses electrons and hence there is a decrease in oxidation state of the species.During redox reactions, there is no net change in the number of electrons . Electrons which are given off in oxidation are used up in reduction.
Therefore, the correct option is B.
Learn more about redox reactions,here:
https://brainly.com/question/28300253
#SPJ4
Which ecosystem is most resilient to change due to its high diversity?
mountain meadow
stormwater pond
coral reef
arctic tundra
stormwater pond .............
Coral reefs are believed to be the most diverse of any ecosystem. Hence it is most resilient to change due to its high diversity. Thus, option c is correct.
What are coral reefs ?Coral reefs are sometimes referred to as the "rainforests of the sea" due to the richness of life that can be found there. The health of coral reefs is essential for around 25% of the ocean's fish. In the many crevices created by corals, fish and other species find shelter, food, breed, and raise their young.
More than 7,000 different kinds of fish, invertebrates, plants, sea turtles, birds, and marine mammals may be found here. Coral reefs offer chances for recreation, serve as a barrier against erosion and storm damage, and support local economies. They are also a source of fresh medications and food.
More than 500 million people rely on reefs for safety, income, and food. On and around reefs, fishing, diving, and snorkeling generate hundreds of millions of dollars for nearby businesses. Hence, option c is correct.
Find more on coral reefs:
https://brainly.com/question/15794949
#SPJ6
Who made the first periodic table
Which of the following statements best goes with the Law of Conservation of Energy?
all energy conversions are 100% efficient
O all energy from the sun is transferred to organisms directly by the 10% rule
O all of the sun's energy is either transformed into kinetic energy, and eventually heat energy
O all matter cannot be created or destroyed
Answer:
all letter cannot be created or destroyed just transformed
g When water and perchloric acid (HClO4) are mixed, heat is released. The resulting solution is not an ideal solution, in terms of Raoult’s Law. How should the boiling point and the vapor pressure of a solution of HClO4 in H2O differ from what is expected for an ideal solution? A) boiling point higher than expected, vapor pressure lower than expected B) boiling point higher than expected, vapor pressure higher than expected C) boiling point lower than expected, vapor pressure lower than expected D) boiling point lower than expected, vapor pressure higher than expected E) boiling point and vapor pressure are both the same as expected for an ideal solution
Answer:
A) boiling point higher than expected vapor pressure lower than expected.
Explanation:
When water is introduced with heat it vaporize at a temperature of 100 degree centigrade. When hydrochloric acid is added to the water its boiling point of water increases slightly. The difference in the boiling point is due to the presence of heavier molecules in acid.
Please someone help mee
Answer:
13.9kj/mol
Explanation:
[tex]h = 891 -(393.5 +2*241.8)=1768.1=13.9kj/mol[/tex]
The mass of a dust particle would be measured in?