what mass of O2(g) is required to completely react with 25.0g of Fe(s)?

3Fe(s) + 2O2(g) → Fe3O4(s) (Balanced)

Answers

Answer 1
Answer is 9.55 g of O2. Please see the photo for work. Hope it helps!
What Mass Of O2(g) Is Required To Completely React With 25.0g Of Fe(s)?3Fe(s) + 2O2(g) Fe3O4(s) (Balanced)

Related Questions

46 g of glycerin were dissolved in 100 g of water. What is the freezing point of this solution?


Additional information:
М(С3Н5(ОН)3) = 92 g/mol;
Тf(Н2О) = 273.15 К;
Кf = 1.86 kg⋅К/mol.

Answers

Based on the formula to determine the freezing point depression of the solvent, the freezing point of the solution is 263.85 K.

What is the freezing point of a substance?

The freezing point of a substance is the temperature at which the liquid changes to solid without any further decrease in temperature occurring during the process.

The addition of solute substances in liquids usually lowers the freezing point of the liquid solvent.

The formula to determine the freezing point depression of solvent is given below:

ΔT = i * Kf * m

where'

ΔT is the change in freezing point,i is the van't Hoff factor,Kf is the freezing point depression constant, andm is the molality of the solution.

The molality of the given solution = moles of solute/kg of solvent

moles of solute = 46/92

mass of solvent = 100 g or 0.1 kg

Molality of solution = (46/92) / 0.1

Molality of solution = 5

for glycerine, i = 1

ΔT = ΔT = 1 * 1.86 * 5

ΔT = 9.3

The freezing point of the solution = 273.15 - 9.3

The freezing point of the solution = 263.85 K

Learn more about freezing point depression at: https://brainly.com/question/30093044

#SPJ1

Charged Particles
Charge on Particle Number of Particles
Positive 3
Negative 2

A negatively charged substance is brought near the ion. What will most likely happen?


(A) The negatively charged ion will repel the substance.
(B) The negatively charged ion will attract the substance.
(C) The positively charged ion will repel the substance.
(D) The positively charged ion will attract the substance.

Answers

Answer:

D

Explanation:

cause overall charge is +1 so will attract

Osmosis.
10 % solution of sodium chloride is on the first side of the semipermeable membrane separating the vessel and 2 % solution of sodium chloride is on its other side. Describe the process taking place there.

Answers

Answer:

Osmosis is taking place in the vessel, where a 10% solution of sodium chloride is on one side of the semipermeable membrane and a 2% solution of sodium chloride is on the other side. Osmosis is a special case of diffusion, where water moves from an area of higher concentration to one of lower concentration. In this case, water will move from the 10% solution to the 2% solution, as it has a higher solute concentration. This process is known as osmoregulation and it involves maintaining salt and water balance across membranes within the body’s fluids. The key to remember about osmosis is that water flows from the solution with the lower solute concentration into the solution with higher solute concentration. As such, in this case, water will flow from the 2% solution to the 10% solution.

Explanation:

sap can be turned into syrup by

Answers

Answer: by boiling it

Explanation:

By boiling the sap to remove water, also to concentrate the sugar that makes maple syrup.

Which fuels are non-renewable

Answers

Answer:

fossil fuels

Explanation:

Well I had some topics on this stuff last quarter in science and from what I can remember it should be fossil fuels I think that fossil fuels are technically renewable but they are considered non-renewable since they are either in small supplies, are hard to obtain or take a long time to form.

If 467.08 grams of Oz are reacted, how many grams of C6H5CH3 will also be reacted?

Answers

In order to react with 467.08 grams of O2, 4034.95 g of toluene (C6H5CH3) is required.

What are some uses for toluene?

Toluene is a white liquid hydrocarbon found in petroleum and coal tar that is employed like a solvent and in the synthesis of organic compounds. Toluene is a naturally occurring substance found in crude oil and is used for oil refining as well as the production of glues, lacquers, paints, and explosives. Toluene can be discovered in household products like paint, paintbrush cleaner, nail polish, glue, inks, and stain removers.

For the balanced equation

2C6H5CH3 + 3O2 → 7CO2 + 4H2O

We required three steps

1.) Convert mass of O2 to mol of O2

mole = mass / molar mass

2.) Find mole of C6H5CH3 by multiply mol O2 by the mol ratio between O2 and C6H5CH3 in balanced equation.

3.) Find mass C6H5CH3 by multiply mol C6H5CH3 by its molar mass (92.14 g/mol)

= 467.08 gm /15.999 gm × 3/ 2 ×92.14 gm

= 4034.95 gm. of C6H5CH3

To know more about Toluene visit :

https://brainly.com/question/6181289

#SPJ1

HELP PLEASEUse the molar volume of a gas at SATP to determine the
following values at SATP:
(a) the amount of nitrogen in 44.8 L of pure gas
(b) the volume (in litres) of 4.8 mol of propane gas, C3H,(g)
(c) the mass of carbon dioxide in 34.6 L of carbon dioxide
gas, CO₂(g)
(d) the volume (in mL) of 1250 g of methane, CH₂(g)
(e) the amount of oxygen in 36.5 L of 02 gas

Answers

The most common example is the molar volume of a gas at standard temperature and pressure (STP), which is equal to 22.4 L for 1 mole of any ideal gas at 273.15 K and 1 atm of pressure.

What are the applications of the Ideal Gas Law- Molar Volume?

Stoichiometry refers to the quantitative relationship between reactants and products. Calculating the quantities of reactants needed to make a given quantity of products, or the quantities of products resulting from a given quantity of reactants, is required in stoichiometric problems. Gas laws must be taken into account for the calculation if one or more reactants or products in a chemical reaction are gases. The findings of ideal gas law applications are often accurate to within 5%. We go over a few key ideas that are crucial for solving Stoichiometry Problems involving Gases in the sections below.

Stoichiometry and gas laws both rely on the mole notion as their foundation. A mole is an exact measurement of a substance. Based on the quantity of identities, a mole is a unit (i.e. atoms, molecules, ions, or particles). The number of identities in a mole of anything is equal to the number of atoms in exactly 12 grams of carbon-12, the most common isotope of carbon.

Learn more about Ideal Gas Law- Molar Volume: https://brainly.com/question/15132707

#SPJ1

. If a balloon will rise off the ground when it contains 0.0226 mol of helium in a volume of 0.460 L, how many moles of helium are needed to make the balloon rise when its volume is 0.865 L? Assume that temperature and pressure stay constant.

Answers

The number of moles of helium (He) needed to make the balloon rise is 0.043 moles.

How to calculate number of moles?

The number of moles of a gas can be calculated using the following expression:

V₁/n₁ = V₂/n₂

Where;

V₁ = initial volumen₁ = initial moles V₂ = final volumen₂ = final moles

Avogadro’s law to predict what will happen to the volume of a sample of gas as we change the number of moles. Because V/n is a constant for any given sample of gas (at constant P and T).

At constant temperature and pressure the volume of a gas is directly proportional to the number of moles of gas.

0.46/0.0226 = 0.865/n

20.3539823n = 0.865

n = 0.043 moles

Therefore, 0.043 moles is the number of moles of the gas when the balloon rises.

Learn more about Avogadro's law at: https://brainly.com/question/4133756

#SPJ1

Conduct research to identify two naturally occurring radioactive elements and two synthetic radioactive elements.

Answers

Natural radioactive elements are those that spontaneously radiate in nature and have an atomic number between 82 and 92. In dirt, air, water, rocks, plants, food, uranium—a radioactive element—can be discovered.

What makes certain substances radioactive?

When an element's atoms contain excess neutrons or protons, the extra energy produced in the nucleus causes the atom to lose its equilibrium or become unstable. if and how radioactive particles can become stable. Radiation is produced by radioactive atoms' unstable nuclei.

What radiation is the most dangerous?

Compared to beta and gamma particles, alpha particles represent the most dangerous internal threat. The most hazardous methods of exposure to radioactive elements that release alpha and beta radiation are ingestion, inhalation, absorption, and injection. Gamma radiation is the outside hazard that causes the most damage.

To know more about radioactive elements visit:

https://brainly.com/question/17551878

#SPJ1

For this assignment, you will make a scale model—a “core sample”—showing the layers of the Earth: crust, lithosphere, asthenosphere, mantle, outer core, and inner core.

Answers

To make a scale model of the Earth's layers, you will need the following
-A large, clear plastic container
-A ruler
-A variety of different colored modeling clay
-A sharp knife
-A marker

Instructions:
1. Measure the height of the plastic container and mark it with the marker.
2. Cut the modeling clay into thin slices with the knife.
3. Begin layering the clay slices in the container, starting with the crust at the bottom.
4. Layer the lithosphere, asthenosphere, mantle, outer core, and inner core in order.
5. Use the ruler to measure the thickness of each layer and mark it with the marker.
6. Once all the layers are in place, your scale model of the Earth's layers is complete!

Hope that helps !?
To make a scale model of the Earth's layers, you will need the following materials:

Cardboard or foam board
Scissors
Glue
Markers or paint
Ruler
First, decide on a scale for your model. For example, you could use a scale of 1 inch = 1000 miles. This means that for every 1 inch on your model, it represents 1000 miles in the actual Earth.

Next, use your ruler to measure and cut out strips of cardboard or foam board to represent the layers of the Earth. The crust is the outermost layer and is relatively thin, while the inner core is the innermost layer and is the thickest. Use your markers or paint to label each layer and add any additional details or information you would like to include on your model.

Finally, glue the layers together in the correct order, starting with the crust at the top and ending with the inner core at the bottom. Your scale model of the Earth's layers is now complete!

If hydrogen diffuses at the rate of 10 cm³ per second from a given apparatus under given conditions of temperature and pressure, calculate under same conditions: a) the volume of oxygen (O₂) which diffuses in 20 seconds ​

Answers

Answer:

Volume of O₂ = 200cm³

Explanation:

Rate of diffusion of gas is directly and inversely proportional to the volume and time taken for the gas to diffuse completely.

Volume

R = -----------

time

let R₁ represent the rate at which the given volume of hydrogen gases diffuses and R₂ represent the rate at which the the volume of the oxygen gas diffused.

V₁, V₂, T₁ and T₂ follows the same process

If the two gases diffuses at the same rate, then;-

R₁ = R₂

V₁ V₂

---------- = ------------

T₁ T₂

V₂

10 = ----------------

20

V₂ = 20•10

V₂ = 200cm³

Therefore, the volume of oxygen that could diffuse in 20 seconds is 200cm³

PLEASE HELP! 80 POINTS
Create a VESPR drawing for
NH3
CH20
N3
SO2CI2
BrF5

Answers

Answer:

hope it helps you

Please help me fill in the blanks

Answers

Answer: ew i hate science but ive done that same thing before i dont remember the answers though

Explanation:

order these elements by decreasing electron affinity:
Na, Al, S, K, F

Answers

Answer:

increasing to decreasing:

F--- S--- Al--- Na--- K

not sure...

Use the ideal gas law to find the volume that 4.30 mol of oxygen gas occupies at 99.7 kPa and 35.0 °C.
help please

Answers

According to the ideal gas law, 4.30 molecule of o2 occupies 0.11 m³ at 99.7 kPa with 35.0 °C.

What is a straightforward definition of ideal gas law?

The relationship between a gas's pressure P, volumes V, and t in the range between low pressures and extremely high temperatures, when the gas's water moves virtually independently of one another, is known as the ideal gas, also known as the perfect gas law.

PV = nRTp = pressure in PaV

= volume in m³n = number of molesR

= molar gas constant (8.31 JK⁻¹mol⁻¹)T

= temperature in Kpressure ⇒ 99.7 × 10³ Pa

temperature ⇒ 35.0 + 273 = 308

KpV = nRT

= 99.7×10³×V= 4.30×8.31×308V

=(4.30×8.31×308)/(99.7×10³3 )V

= 0.11 m­³

To know more about Ideal gas law visit:

brainly.com/question/13821925

#SPJ1

Scientists found the remains of dinosaur fossils in a remote section in the west, located
within ten miles of a meteor crash site. Which statement can be made about the
dinosaur and the meteor?
O a. The dinosaur could have died from a flood.
O b. The dinosaur and the meteor are not related.
O c. The dinosaur could have died from freezing to death.
O d. The dinosaur could have died due to an meteor crash.

Answers

Answer:

D  The dinosaur could have died due to an meteor crash.

Explanation:

Answer:

D

Explanation:

The dinosaurs fossils were found ten miles away from the meteor crash site. Correct me if I'm wrong

A scientist did a test to compare two substances: substance Q and substance R. At room temperature, both substances are liquid. When the scientist transferred the same amount of energy out of both substances, only one substance changed phase while the other did not. Which substance changed phase, and how did it change?
Responses

a
Substance Q changed phase because the attraction of the molecules was able to overcome their slower movement. Its molecules now move in place.
Substance Q changed phase because the attraction of the molecules was able to overcome their slower movement. Its molecules now move in place.

b
Substance Q changed phase because the strong attraction between molecules made their movement slower. Its molecules now move in place.
Substance Q changed phase because the strong attraction between molecules made their movement slower. Its molecules now move in place.

c
Substance R changed phase because the weak attraction between molecules let them move faster. Its molecules now move around each other.
Substance R changed phase because the weak attraction between molecules let them move faster. Its molecules now move around each other.

d
Substance R changed phase because the attraction was able to overcome the slower molecules. Its molecules now move away from each other.
Substance R changed phase because the attraction was able to overcome the slower molecules. Its molecules now move away from each other.

Answers

Substance R changed phase because the weak attraction between molecules let them move faster.  Option C

What is phase change?

We know that a change of phase has to do with the movement of a material from a given state of matter to the other. Net us note that when there is a change of state, we are going to notice that the force of attraction in the molecule would also change.

Since we know that the substance that we have are liquid at room temperature, we know that the supply of some energy may cause to be bale to change its phase.

Learn more about phase change:https://brainly.com/question/12390797

#SPJ1

CHEMISTRY FORM THREE Exercise 2.1 1) Not all metals share the typical metal properties.name a metal that is: a. hard and strong b. malleable at room temperature ​

Answers

a) The strongest metal on the planet is tungsten.

When it comes to tensile strength, tungsten tops all other metals. One of the strongest metals known to man, tungsten has an ultimate strength of 1510 Megapascals.

In addition to having the greatest melting point of any unalloyed metal, tungsten boasts greater strength. Tungsten is frequently employed in electrical and military applications due to its strength.

Tin is a malleable, silvery-white metal that is highly flammable at ambient temperature.

Metal malleability is a complex subject. There is no objective test available to measure this feature, as we previously stated. We most frequently test it for hardness.

The most malleable and ductile metals are gold and silver. Pure gold and silver are too soft to be used to create items that will keep their shape.

Metals may be molded into different shapes, such as thin sheets or foils, without breaking or shattering because they are malleable. They are also ductile, making it simple to draw them into wires.

To learn more about metals from given link

https://brainly.com/question/4701542

#SPJ1

12. Surface lakes of glacier meltwater are shown overflowing into channels, which then pour down
moulins. What happens to this water? Why is this bad for the glacier?

Answers

Answer:

When surface lakes of glacier meltwater overflow into channels and pour down moulins (vertical shafts or tunnels in the ice), the water typically flows into the base of the glacier and can cause the glacier to melt more rapidly. This process is known as "moulin drainage," and it can be detrimental to the glacier because it can cause the glacier to lose mass more quickly.

Losing mass through moulin drainage can cause a glacier to retreat or shrink in size, which can have a number of impacts on the surrounding environment. For example, if a glacier is a primary source of water for a region, its retreat could lead to water shortages. In addition, the loss of a glacier can affect the local ecosystem and wildlife, and it can contribute to sea level rise if the glacier is located near the coast.

HOPE IT HELPS!

Iron has a density of 7.31 g/cm3.what is the mass of 2.25 cm3 of sodium?

Answers

7.9 g/cm3 is the density of iron.  There are three possibilities: 1.3 × 103 g 2.3 × 10-2 g 4.3 × 102 g 2.1 × 104 g 1.4 g.

What is the density of iron?

Iron has a density of 7.874g/cm3.

At atmospheric pressure, different substances have their typical densities.

The mass per unit volume is the definition of density. Mathematically speaking, its intense attribute is defined as mass divided by volume:

ρ = m/V

The total mass (m) of a material divided by the total volume (V) . it occupies is how a substance is defined as having a density (). The kilogram per cubic meter (kg/m3) is the metric unit used by the SI. The pounds mass per cubic foot (lbm/ft3) measurement is used in Standard English.

Compressibility (also known as the coefficient of compressibility is a measure of the relative volume change of a fluid or solid as a response to a pressure (or mean stress) change.

Learn more about density of iron: https://brainly.com/question/11293588

#SPJ1

1. What is the modern view of electrons in the quantum mechanical model?

Answers

Answer: An electron con only exist in a limited number of quantized energy levels.

Explanation:

Which block of elements is non-reducing?

Answers

Answer: S-block elements

Explanation: Elements of S-block are prepared through the electrolysis process not by the reduction of their compounds with the other group elements of their compounds. For example in Carbon dioxide carbon is non reducing because oxidation state of `C "in" CO_(2)` is `+4`, which is maximum So it does not undergo oxidation, and hence, it is not a reducing agent.

Using ethylene (HC-CHz) as your only source of carbon atoms, outline a synthesis for 3- hexanone,

Answers

The organic compound 3-hexanone can be prepared from ethylene using the second method given in the options.

What is 3-hexanone?

3-hexanone is an organic compound classified to the ketones. Ketones are compounds with C=O group. 3-hexnone has the carbonyl group in the third carbon in the chain.

3- hexanone can be synthesized alkene sources by first converting them to alkynes. This process is oxidation. Ethylene can be oxidized to ethyne by treating with HBr and NaNH2 followed by hydrolysis.

The obtained higher alkyne or hexyne undergone acid hydrolysis in presence of sulphuric acid giving 3-hexanone.

Find more on ketones:

https://brainly.com/question/4439718

#SPJ1

Why atoms form compounds

Answers

Answer:

Because the atoms are trying to reach the most stable ( lowest energy ) state they can.

Write a skeleton molecular equation for the following chemical reaction: Sulfuric acid reacts with solid sulfur to form sulfur dioxide gas and water. You should have two equations, one word equation and one chemical equation.

Answers

Word equation: sulfuric acid + sulfur -> sulfur dioxide + water

Chemical equation: H2SO4 + S -> SO2 + H2O

Answer:

Word equation: Sulfuric acid + Sulfur → Sulfur Dioxide + Water

Chemical equation: H2SO4 + S → SO2 + H2O

Explanation:

why is it important for a consumer to know the properties of a textile fibre ​

Answers

A thorough understanding of clothing and textiles will enable one to evaluate standards and product brands intelligently. It will also help one develop the capacity to recognize fabric quality, which will help one understand the best applications for the various qualities.

Understanding why some fabrics are more durable and so more suited for particular uses comes from studying textiles. It permits one to comprehend the rationale behind why particular materials generate cool-looking clothing in addition to creating the sense of coolness when used as décor. A thorough understanding of clothing and textiles will enable one to evaluate standards and product brands intelligently.

It will also help one develop the capacity to recognize fabric quality, which will help one understand the best applications for the various qualities. Although clothes don't necessarily make a person, they certainly help to develop a positive personality and a sense of self-assurance. Housewives should therefore be familiar with clothing and textiles to obtain the best out of it.

To learn more about clothing and textile from given link

https://brainly.com/question/18411505

#SPJ1

Bauxite ore contains aluminum oxide, which is decomposed using electricity to
produce aluminum metal and oxygen. What mass of aluminum metal can be
produced from 125 g of aluminum oxide?

Answers

Answer:

66.48 g.

Explanation:

Bauxite ore contains aluminium oxide which is decomposed using electricity to produce aluminium metal and oxygen gas

A graduated cylinder contains 50.0 ml of water. A 23.5 g piece of unknown metal is carefully dropped into the cylinder. When
the metal is completely covered with water, the water rises to the 53.4 ml mark. What is the density of the unknown piece of
metal in g/ml?

Answers

To find the density of the unknown piece of metal, we can use the formula:

Density = mass / volume.

How to find the density ?The volume of the metal can be calculated by deducting the starting water volume (50.0 ml) from the final water volume (53.4 ml) after the metal is introduced. We know the mass of the unknown metal is 23.5 g.Volume of metal = 53.4 ml - 50.0 ml = 3.4 ml.Now we can substitute the values into the density formula: Density = 23.5 g / 3.4 ml = 6.9 g/ml.Therefore, the density of the unknown piece of metal is 6.9 g/ml.

To know more about density , check out :

https://brainly.com/question/1354972

#SPJ1

What is the domain of the following function?
A) x < 15
B) x ≤ 4
C) x > 2
D) All Real Numbers

Answers

The domain of the function that has been shown are all real numbers. Option D

What is the domain of a function?

Let us note that when we are talking about the domain of the function, we mean the areas that the function is able to have a value. We are also trying to define the areas where the actual value of the function can be determined.

It is normal that all the mathematical functions that we have must have a domain and a range. The domain of the function would depend on the kind of function that it is and that determines what its domain would be.

Learn more about domain of a function:https://brainly.com/question/28599653

#SPJ1

Neera and Tom dissolved different masses of salt in 500 cm³ of water.
They measured the temperature at which each salt solution boiled.
salt
solution
(They wrote down the variables that might affect the investigation.
temperature of the
mass of salt
laboratory
dissolved in water
boiling point of
salt solution
thermometer
volume of water
starting temperature
of the water
type of salt used

Answers

The variables that might affect the investigation while dissolving different masses of salt are temperature and mass of the salt.

In the provided investigation, what are the independent and dependent variables?

A variable that changed during the inquiry is regarded as an independent variable and is called "mass of salt dissolved in water." While the investigation's dependent variable, "boiling point of salt solution," is a variable that was monitored.

What are variables in a laboratory?

There are numerous things that can be changed to see how they affect other things. Variables are the changeable quantities. Any element, character trait, or condition that can exist in a variety of forms or concentrations is a variable. Independent, dependent, and controlled variables are the three types of variables that often make up an experiment.

Learn more about temperature here:

brainly.com/question/15520591

#SPJ1

Neera and Tom dissolved different masses of salt in 500 cm3 of water.

They measured the temperature at which each salt solution boiled.

(a) They wrote down the variables that might affect the investigation.

temperature of the laboratorymass of salt dissolved in waterstarting temperature of the waterboiling point of salt solutionvolume of watertype of salt used

(i) What is the independent variable (the variable they changed) in

their investigation?

(ii) What is the dependent variable (the variable they measured) in

their investigation?

(iii) Which variable above would affect the experiment the least?

Other Questions
Questions:1. What did you do to the numerators? What did you do too to the denominators?2. Did you find like terms among the collected terms of the numerator? What did you doto terms?3. What factoring techniques did you apply?4. How did you simplify your sum? What is the significance of knot it in Trifles? Did the US want Hawaii? What is a theme in a literary text ? Which of the following is a factor contributing to widespread obesity in U.S. society?A) Fewer of today's jobs involve the physical labor common in the past.B) More work around the house is done by machines.C) The typical diet involves both more food and more salty and fatty food.D) All of these responses are correct. 1. The sum of two angles is 85, one angle is five more than the measure of the other angle. Write the equation that represents this scenario and find the measure of each angle. Be sure to show yourwork. 1. Two objects with the same mass move toward each other with the same speed and experience an elastic collision. Compare the final velocities of each object to their initial velocities What are the two major grains found on ALL lumber? WZ and XR are diameters of circle C. The diagram is not drawn to scale.Circle C is shown.Radii are drawn from point C to point R at the right, point Z at the upper right, point Y at the upper left, point X at the left, and point W at the lower left.Angle Y C Z measures 112 degrees.Angle X C W measures 63 degrees.Points X, C, and R are all on the horizontal diameter of the circle.What is the measure of convex arc upper Z upper W upper X? A. 355 B. 5 C. 292 D. 243 What does it mean to have no one to care for you? Id love you he help for all of it but ill take what I can get LESSON 12-1 Properties of Translations Practice and Problem Solving : A / B The process of planning future business actions and expressing them as a formal plan is called: Multiple Choice O Budgeting. O Cost accounting. O Managerial accounting. O Standard cost analysis. O Variance analysis. How do you translate coordinate points on a graph? If it takes 4 hours for the Hogwarts express, moving at a speed of 100 mi/hr,to make it from Platform 9 and 3/4 to Hogwarts,how far apart are they? Is 5 years a long-term investment? when investors examine the performance of beauty products like olay moisturizers and CoverGirl cosmetics they are looking for The _________ was successful, and for almost twelve years the Pueblos Indians lived autonomously from Europeans. HELP PLEASE 10 POINTS! a. 160 is what percentage of 40?b. 40 is 160% of what number?c. What number is 40% of 160? What are logarithms used for?