what number of moles of h2 will be produced when 4.0 mol na is added to 1.2 mol h2o?

Answers

Answer 1

The balanced chemical equation for the reaction between sodium (Na) and water (H2O) is:

2Na + 2H2O → 2NaOH + H2

This means that for every 2 moles of sodium added, 1 mole of hydrogen gas (H2) is produced. Therefore, to calculate the number of moles of H2 produced, we need to first determine the number of moles of sodium added and then use the mole ratio from the balanced equation.

In this case, we are given that 4.0 moles of Na is added and 1.2 moles of H2O is present. Since Na and H2O react in a 1:2 ratio, we can determine the number of moles of NaOH produced by dividing the number of moles of H2O by 2:

1.2 mol H2O ÷ 2 = 0.6 mol NaOH

Since 2 moles of Na produce 1 mole of H2, we can use a mole ratio to calculate the number of moles of H2 produced:

4.0 mol Na × (1 mol H2 / 2 mol Na) =2.0 mol H2

Therefore, 2.0 moles of H2 will be produced when 4.0 mol Na is added to 1.2 mol H2O.
When 4.0 mol of Na reacts with 1.2 mol of H2O, the balanced chemical equation is:

2 Na + 2 H2O → 2 NaOH + H2

From the balanced equation, you can see that 2 moles of Na reacts with 2 moles of H2O to produce 1 mole of H2. To find the number of moles of H2 produced, first determine the limiting reactant:

Na: 4.0 mol / 2 = 2.0 (sets of reactants)
H2O: 1.2 mol / 2 = 0.6 (sets of reactants)

H2O is the limiting reactant. Now calculate the moles of H2 produced:

0.6 (sets of reactants) × 1 mol H2 = 0.6 mol H2

So, 0.6 moles of H2 will be produced when 4.0 mol of Na is added to 1.2 mol of H2O.

To know more about balanced chemical equation visit:

https://brainly.com/question/28294176

#SPJ11


Related Questions

A compound's molar mass is 240g/mol. its percentage composition is 75% carbon, 5.05% hydrogen and 19.95% oxygen, what is the molecular formula?
explanation please

Answers

The molecular formula of the compound is C15H12O3.

What is the molecular formula of the compound?

The molecular formula of the compound is determined from the mole ratio of the elements in the compound.

Carbon = 0.75 × 240/12 = 15

Hydrogen = 0.0505 × 240/1 = 12

Oxygen = 0.1995 × 240/16 = 3

Therefore, the molecular formula of the compound is C15H12O3

In conclusion, the molecular formula of the compound is determined from the mole ratio of the elements and their percentage composition.

Learn more molecular formula at: https://brainly.com/question/15092254

#SPJ1

Consider the chemical equation in equilibrium. CH4(g) H2O(g) CO(g) 3H2(g) What will happen to the equilibrium of this reaction if the pressure is increased

Answers

The equilibrium of this reaction will shift to the left to favor the reverse reaction if the pressure is increased.

Balanced chemical equation

CH₄(g) + H₂O(g)  → CO(g) + 3H₂(g)

The principle suggests

The equilibrium will move to the side of the reaction where there are fewer moles of gas as pressure increases.

And the equilibrium will move toward the side of the reaction where there are more gas molecules when the pressure is reduced.

In the given chemical equation

The no. of moles of reactant = 2

The no of moles of the product = 4

Total moles of reactant is less than that of total moles of product

Therefore, If the pressure is increased the equilibrium of this reaction will shift to the left to favor the reverse reaction.

Learn more about Le Ch-atilier's principle here https://brainly.com/question/3384381

#SPJ1

Nuclear decay occurs according to first-order kinetics. What is the half-life of zinc-65 if a sample decays from 65.0 g to 2.90 g in 3.0 years

Answers

Answer:

Explanation:

244 days

will you brainlyest?

The half life of the Zn-65 sample if it decays from 65 g to 2.9 g in 3 years is 1.53 years. This can be obtained using the first order kinetic of nuclear decay.

What is nuclear decay?

Nuclear decay is the process by which unstable isotopes of an atom decays by the emission of alpha or beta particles to form stable nuclei. Nuclear decay is a first order reaction and the decay constant k can be written as:

k = 1/t log [no]/[nt]

Where, no and nt be the initial and final amount of the sample.

Given that the initial mass of Zn was 65 g and after 3 years it is 2.90 gram. Thus, decay constant is calculated as :

k = 1/3 yrs log (65/2.9)

  = 0.45 yr⁻¹.

Now, the half life of Zn-65 can be calculated as:

t1/2 = 0.693/ k

      = 0.693/0.45  yr⁻¹

      = 1.53 yrs.

Therefore, the half life of Zn-65 will be 1.53 years.

To find more on nuclear decay, refer here:

https://brainly.com/question/12224278

#SPJ2

How will designing more efficient stoves help conserve fuel?

Answers

Answer:

it would do wonders for the health of those using them and, by extracting energy from the fuel more efficiently, would be more environmentally sustainable too.

Please help!! Balancing Nuclear Equations

Answers

The missing part of the equation is found to be 4/2He. Option A

What are nuclear equations?

The term nuclear equations have to do with the type of equation in which one type of nucleus is transformed into another sometimes by the bombardment or loss of a particle.

Now the full equation ought to be written as 7/3Li + 1/1H -----> 4/2He + 4/2He. This is because the total mass on the left is 8 and the total charge on the left is 4.

Learn more about nuclear equations:https://brainly.com/question/19752321

#SPJ1

According to the modern periodic law the properties of elements are periodic function of their

Answers

Atomic number

Explanation:
This is because atomic number determines the amount of protons and neutrons that are found within the element which plays a factor of the elements functionality

The table shows the amount of radioactive element remaining in a sample over a period of time. radioactive decay rate amount of radioactive sample (grams) time (years) 56.0 0 47.1 400 39.6 800 33.3 1,200 28 1,600 part 1: what is the half-life of the element? explain how you determined this. part 2: how long would it take 312 g of the sample to decay to 9.75 grams? show your work or explain your answer.

Answers

1. The half life of the element, given the data from the question is 1600 years

2. The time taken for 312 g of the sample to decay to 9.75 grams is 8000 years

1. How to determine the half life of the element

Half-life is the time taken for half a material to decay.

To determine the half life of the given element, do the following:

Original amount = 56 gHalf the original amount = 56 / 2 = 28 gTime for 28 g = 1600 yearHalf life of element = 1600 years

How to determine the time

We'll begin by determining the number of half-lives that has elapsed. This can be obtained as follow:

Original amount (N₀) = 312 gAmount remaining (N) = 9.75 gNumber of half-lives (n) =?

2ⁿ = N₀ / N

2ⁿ = 312 / 9.75

2ⁿ = 32

2ⁿ = 2⁵

n = 5

Finally, we shall determine the time. This can be obtained as follow:

Half-life (t½) = 1600 yearsNumber of half-lives (n) = 5Time (t) =?

t = n × t½

t = 5 × 1600

t = 8000 years

Learn more about half life:

https://brainly.com/question/26374513

#SPJ1

Type the correct answer in the box. Use numerals instead of words.

The mechanical advantage shown in the image in ___.

Answers

The mechanical advantages of the machine are 3.

The amount that a force is boosted by employing a machine is known as the mechanical advantage. It is determined by dividing the applied force by the machine's force ( force exerted by the machine).

That is the mechanical advantage of any machine is equal to the ratio between the output force and the input force.

Mechanical advantages M.A. = Input force / Output force

We have,

Input force: 52 N

Output force: 156 N

Therefore,

Mechanical advantage = Input force / Output force.

52/156 = 3

Hence, the mechanical advantages of the machine are 3.

For more study about mechanical advantages refer given link https://brainly.com/question/18345299.

#SPJ1.

Chlorine gas is applied at a rate of 40 pounds per day to a well operating at 1250 gpm. What is the chlorine dosage for this well, expressed in parts per million

Answers

2.7 is the chlorine dosage for this well, expressed in parts per million.

Unlike municipal water, well water does not go through a water treatment facility. That implies that it could be contaminated with poisons like lead, coliform bacteria, volatile chemical compounds, and others. chlorination in well water is done to fulfill the role that chlorine plays in municipal sources' water disinfection processes.

It is advised to start with a chlorine concentration of 50 to 100 parts per million (ppm).

Bacterial pollutants are eliminated from well water, well casings, holding tanks, and the entire water delivery system via shock chlorination. To shock chlorinate, a well driller with a license is trained.

Algae have been linked to green water, and they may thrive in both surface water and groundwater wells even in the absence of sunshine. Algae can color the water in both the pre-and post-decomposition stages with a variety of hues, including green, brown, and reddish.

To know more about chlorination refer to:  https://brainly.com/question/13347874

#SPJ1

Magnesium and calcium have similar chemical properties because their atoms in the ground state have.

Answers

Magnesium and calcium have similar chemical properties because they have the same number of electrons in their valence shells.

What does magnesium and calcium have in common?

The valence/outermost shell of magnesium and calcium both has two electrons. An element's chemical characteristics are dictated by how its electrons are arranged in their orbits around the nucleus. The same number of protons and electrons means that an element's chemical behavior is fundamentally determined by its atomic number, which explains why Mg and Ca share the same chemical properties.

On the periodic table, magnesium and calcium are both located in the second vertical column. Magnesium and calcium are alkaline earth metals, just like all Group 2 elements. Both of them are salt-forming soft, silver-colored metals that respond fast to halogen gases like fluorine, chlorine, and bromine.

Learn more about magnesium and calcium here:

https://brainly.com/question/11324493

#SPJ4

Write the balanced chemical equation for the reaction of aqueous sodium sulfate
and solid calcium chloride to produce aqueous calcium sulfate and solid sodium
chloride

Answers

The equation of the reaction is [tex]Na_2SO_4 (aq) + CaCl_2 (s) --- > CaSO_4 (aq) +2 NaCl (s)[/tex]

What are chemical reactions?

They are reactions involving chemical reactants leading to the formation of chemical products.

The chemical formula for sodium sulfate is [tex]Na_2SO_4[/tex]

The chemical formula for calcium chloride is [tex]CaCl_2[/tex]

The two react to produce calcium sulfate  ([tex]CaSO_4[/tex]) and sodium chloride (NaCl) according to the following equation:

[tex]Na_2SO_4 (aq) + CaCl_2 (s) --- > CaSO_4 (aq) +2 NaCl (s)[/tex]

More on chemical reactions can be found here: https://brainly.com/question/22817140

#SPJ1

What three letters are always added to the end of nonmetals in naming ionic compounds?

Answers

Answer:

-ide

Explanation:

Ionic compounds are made up of two parts: a cation and an anion. The cation is positively charged (less electrons) and the anion is negatively charged (more electrons). When naming these compounds, if the anions are nonmetals, they have their endings dropped in order to add the new ending: -ide.

Examples,

CaCl₂ ----> calcium chloride

BaF₂ -----> barium fluoride

MgO -----> magnesium oxide

What two basic geologic processes contributed to the formation of folded mountain ranges like in Glacier National Park?

Answers

The two basic geologic processes which contributed to the formation of folded mountain ranges like in Glacier National Park include:

Folding and breaking of sedimentary rocks.Erosion.

What is Erosion?

This is a geologic process which involve materials in the earth being washed away and transported to other parts by water, wind etc.

In the case of Glacier National Park, ice erodes the mountain thereby resulting in the folding of the sedimentary rocks.

Read more about Glacial erosion here https://brainly.com/question/8880387

#SPJ1

Please help me i really need it!

Answers

The average atomic mass of sulfur = 32.33 u

What is the average atomic mass of sulfur?

The average atomic mass of sulfur is determined as follows:

Average atomic mass = (31.977 × 0.818) + (32.97 × 0.008) + (33.97 × 0.174)

Average atomic mass = 32.33

In conclusion, the average atomic mass of sulfur is determined from the sum of the isotopic masses and their relative abundance.

Learn more about average atomic mass at: https://brainly.com/question/6200158

#SPJ1

Phosphorus reacts with oxygen gas to produce solid diphosphorus pentoxide. What type of reaction is represented

Answers

It is a combination reaction.

            P + O₂ → P₂O₅

What is a combination reaction?

Combination reactions are those in which two or more reactants combine to create a single product.

A synthesis reaction is another name for a combination reaction. The overall form of the reaction is as follows:

                                        X + Y → XY

There can be a combination reaction between two elements, two compounds, or a compound and an element.

Examples:

H₂ + Cl₂ → 2HCl

P + O₂ → P₂O₅

C + O₂ → CO₂

Learn more about combination reactions here:

https://brainly.com/question/17258460

#SPJ4

predict the theoretical mass of baco3 that should form

Answers

A precipitation reaction occurs when 50. 0 mL of 0. 50 M BaCl₂ is mixed with 75. 0 mL of 0. 75 M Na₂CO₃ (aq). The only precipitate is the BaCO₃ (s) formed. (a) The balanced chemical equation is BaCl₂ + Na₂CO₃ → BaCO₃ + 2NaCl. (b) The limiting reagent is Na₂CO₃.

What is Balanced Chemical Equation ?

The balanced chemical equation is the equation in which the number of atoms on the reactant side is equal to the number of atoms on the product side in an equation.

Now we have to write the balanced equation

BaCl₂ + Na₂CO₃ → BaCO₃ + 2NaCl

How to find the number of moles ?

To calculate number of moles when molarity and volume are given as:

Number of moles = Molarity × Volume

Now,

Number of moles of BaCl₂ = Molarity  × Volume

                                             = 0.50 M  × 0.05 L         [1 ml = 0.001 L]

                                             = 0.025 moles

Number of moles of Na₂CO₃ = Molarity  × Volume

                                                = 0.75 M × 0.075 L     [1 ml = 0.001 L]

                                                = 0.05625 moles

The limiting reagent is Na₂CO₃ here.

Thus from the above conclusion we can say that A precipitation reaction occurs when 50. 0 mL of 0. 50 M BaCl₂ is mixed with 75. 0 mL of 0. 75 M Na₂CO₃ (aq). The only precipitate is the BaCO₃ (s) formed. (a) The balanced chemical equation is BaCl₂ + Na₂CO₃ → BaCO₃ + 2NaCl. (b) The limiting reagent is Na₂CO₃.

Learn more about the Balanced chemical equation here: https://brainly.com/question/26694427

#SPJ1

Disclaimer: The question was given incomplete on the portal. Here is the complete question.

Question: A precipitation reaction occurs when 50. 0 mL of 0. 50 M BaCl₂ is mixed with 75. 0 mL of 0. 75 M Na₂CO₃ (aq). The only precipitate is the BaCO₃ (s) formed.

a) Write the balanced equation that describes this reaction.

b) Which chemical is the limiting reactant

Grant plans to evaporate enough water from 22 gallons of a 16 mmonia solution to make a 24 mmonia solution. Which equation can he use to find n, the number of gallons of water he should remove?

Answers

He can use 3.52/22-n = 24/100 equation to find n, where n is the number of gallons of water.

Calculation of amount of ammonia in 22 gallon of 16% ammonia solution.

amount of ammonia  = 16%×22 gallon = 3.53 gallon

The amount of ammonia remains the same after evaporation of water but the total amount of solution is reduced because solution contain ammonia as well as water . So, if water is evaporate then solution reduced.

Amount of water remains = 22 - n

Desired concentration, 24% = 24/100

Therefore the final equation becomes,  

3.52/22-n = 24/100

learn about ammonia,

https://brainly.com/question/12276882

#SPJ2

A chemist want to prepare a solution containing (soluble) silver ions. Which salt should they use? silver nitrate AgCI AgOH silver carbonate 2 pts

Answers

Answer: silver nitrate

Explanation:

it is the only soluble salt listed.

The book value of a machine, as shown on the balance sheet, is not relevant in a decision concerning the replacement of that machine by another machine. (Ignore taxes.) Group starts

Answers

The book value of a machine, as shown on the balance sheet, is not relevant in a decision concerning the replacement of that machine by another machine: TRUE

What is the book value?Book value is the worth of an asset based on its balance sheet account balance in accounting. The value of an asset is determined by subtracting the asset's original cost from any depreciation, amortization, or impairment expenses. Traditionally, a company's book value is equal to its total assets minus intangible assets and liabilities. In practice, however, depending on the source of the computation, book value may include either goodwill or intangible assets, or both. The value inherent in its employees, which is part of a company's intellectual capital, is always overlooked. When intangible assets and goodwill are specifically omitted, the indicator is frequently defined as "tangible book value."

Therefore, the statement "the book value of a machine, as shown on the balance sheet, is not relevant in a decision concerning the replacement of that machine by another machine" is TRUE.

Know more about Book Value here:

https://brainly.com/question/23057744

#SPJ4

Complete question:

The book value of a machine, as shown on the balance sheet, is not relevant in a decision concerning the replacement of that machine by another machine. (Ignore taxes.) TRUE or FALSE

What is a molecular dipole moment?

Answers

A measure of the polarity of the molecule(s)

If a car travels 300 kilometers in 3 hours, its average speed is 100 km/hr.
true or false

Answers

Answer:

speed=distance/time taken

=300km/3hr

=100km/hr

So it is true.

please give brainlest and like

What is a foram and what is curious about the foram fossils of gubbio’s limestone?

Answers

Their fossilized shells formed these limestone rocks, which, like Gubbio's mountains, were once at the bottom of the ocean. Now exposed, they represent over a million years of a geological time period known as the Cretaceous.

Walter Alvarez found that forming a distinct boundary between the limestone of the two periods was a thin layer of red clay. Immediately below this clay boundary, the Cretaceous limestone was heavily populated with a wide mix of the fossils of tiny marine creatures called foraminifera, or “foram” for short.

On the Atlantic Coast, outside the town of Zumaia, Dutch geologist Jan Smit was studying the forams from a different ancient sea. Their fossilized shells formed these limestone rocks, which, like Gubbio's mountains, were once at the bottom of the ocean.

Learn more about limestone here: https://brainly.com/question/13723417

#SPJ4

Consider the reaction and its equilibrium constant at 25.0 ∘C :

CO(g)+2H2(g)⇌CH3OH(g) , Kp=6.09×10−3

A reaction mixture contains P(CO)=0.265atm , P(H2)=0.265atm , and P(CH3OH)=0.265atm .

Is the reaction mixture at equilibrium?

Since Qp>Kp , the reaction is not at equilibrium
Since Qp Since Qp=Kp , the reaction is at equilibrium
Since Qp=Kp , the reaction is not at equilibrium

Answers

Since Qp>Kp , the reaction is not at equilibrium.

What is the equilibrium constant?

The equilibrium constant shows the extent to which reactants are converted into products.

Now we have to obtain the Qp as follows;

Qp =[CH3OH]/[CO] [H2]^2

Qp = 0.265/(0.265) (0.265)^2

Qp = 14.2

Now we know that Kp = 6.09×10−3, Since Qp>Kp , the reaction is not at equilibrium.

Learn more about equilibrium constant:https://brainly.com/question/10038290

#SPJ1

Four students all do the same experiment for the science fair. They test reaction times for pushing a button when a specific color is shown. Their data is as follows: ⎡⎣⎢⎢⎢⎢⎢⎢⎢⎢⎢⎢Student 1Student 2Student 3Student 4Reaction Time (seconds)Trial 10.440.350.410.42Trial 20.410.430.520.43Trial 30.470.380.570.41Trial 40.390.390.460.42Trial 50.460.420.550.41Trial 60.420.440.490.42⎤⎦⎥⎥⎥⎥⎥⎥⎥⎥⎥⎥ Put the students in order from most to least reliable data. A. Student 3, Student 2, Student 1, Student 4 B. Student 2, Student 1, Student 4, Student 3 C. Student 4, Student 1, Student 2, Student 3 D. Student 1, Student 2, Student 3, Student 4

Answers

The order of the students from the most reliable to the least reliable is C. Student 4, Student 1, Student 2, Student 3.

what student has the most reliable data?

the student with the most reliable data is the one that has the least variation in their data in the various trials.

this student is therefore student 4.

the next student would be student 1 and student 2 would be the third most reliable.

student 3 has large variations in their trials which makes their data the least reliable.

find out more on reliable data at https://brainly.com/question/8391667.

#SPJ1

What is the bonding requirement for carbon atoms?

Answers

Answer:

carbon atoms tend to make four bonds, each carbon atom will have the number of hydrogen atoms that are required for four bonds. This compound contains 16 hydrogen atoms for a molecular formula of C 8 H 16.

Explanation:

What is the oxidation number for S in the compound SO3? (Recall that O has an oxidation number of –2.)
0
+2
+4
+6

Answers

The oxidation number for S in the compound SO3 is +6 (option D). Details about oxidation number can be found below.

What is oxidation number?

Oxidation number of an element is the hypothetical charge of an atom within a molecule.

The oxidation number of elements in a compound adds up to the overall charge of that compound.

According to this question, O has an oxidation number of -2 in SO3, the oxidation number of S can be calculated as follows:

x - 2(3) = 0

x - 6 = 0

x = 6

Therefore, the oxidation number for S in the compound SO3 is +6.

Learn more about oxidation number at: https://brainly.com/question/15167411

#SPJ1

The answer is D: 6+

Worked for me on EDGE 2023

Aqueous hydrobromic acid reacts with solid sodium hydroxide to produce aqueous sodium bromide and liquid water . What is the theoretical yield of water formed from the reaction of of hydrobromic acid and of sodium hydroxide

Answers

Mass of water produced is equal to 7.2 grams.

The reactants are reacting according to the following equation:

HBr + NaOH = NaBr + H2O

1 mole of HBr requires 1 mole of NaOH to be totally transformed into NaBr and water.

Now, let us calculate the amounts of HBr and NaOH in mols:

m(HBr) = 67.2g

m(NaOH) = 16g

M(HBr) = 80.9g/mol

M(NaOH) = 40g/mol

Following the simple relation

n(moles) = m(grams)/M(g/mol)

n(HBr) = 67.2g/(80.9g/mol)

n(NaOH) = 16g/(40g/mol)

n(H2O) = n(NaOH) = 0.40 mol, which is:

m(H2O) = n(H2O) x M(H2O)

0.40mol∗18g/mol=7.2g

Finally, the mass of water produced is equal to 7.2 grams.

Learn more about Hydrobromic acid here:

https://brainly.com/question/21544156

#SPJ4

see the attached photo*** can someone please explain how to do this for me? I really need help on my summer school thank you !

Answers

Answer:

See attached image.

Explanation:

See attached image.

Remember to use the units in deciding steps to take.  Find the moles needed or delivered by using:

Molarity x Volume = moles  [(moles/L)*(L) = moles]

Molarity, M, is dedined as 1 mole/liter.  When working with a unit such as 6M, rewite it as 6 moles/liter, and then use unit conversions to guide how to find the solution, so to speak.

In the lab, you looked at speed-time graphs to determine the acceleration of the cart for each of the three fan speeds. what was the acceleration of the cart with low fan speed? cm/s2 what was the acceleration of the cart with medium fan speed? cm/s2 what was the acceleration of the cart with high fan speed? cm/s2

Answers

Answer:

See below.

Explanation:

Acceleration is the change in velocity over a period of time.  

Let vi be the initial velocity.

Let vf be the final velocity.

t is the time it took to go from vi to vf.

Acceleration is (vf-vi)/t

If the initial velocity was 2 cm/s and the final velocity was 10 cm/s, the object would have incresed it's velocity by (10 - 2) or 8 cm/s.  If iit took 10 seconds to reach vf, the acceleration would be:

(8 cm/s)/(10 s) = 0.8 cm/s^2

To demonstrate the formation of iron (iii) chloride from iron fillings

Answers

Iron (iii) chloride is obtained by vapor condensation from the reaction between chlorine gas and iron fillings.

How can iron (iii) chloride be formed from iron fillings?

Iron (ii) chloride can be formed from iron fillings in the laboratory as follows:

Iron fillings + Cl₂ → FeCl₃

Chlorine gas is introduced into a reaction vessel containing iron fillings and the iron (iii) chloride vapor formed is obtained by condensation.

In conclusion, iron (iii) chloride is formed by the the direct combination of iron fillings and chlorine gas.

Learn more about iron (iii) chloride at: https://brainly.com/question/14653649

#SPJ1

Other Questions
the number of objects in a mole of something is dictated by which constant? One mole of a substance is equal to 6.022 xd7 10xb3 units of that substance (such as atoms, molecules, or ions). The number 6.022 xd7 10xb3 is known as Avogadros number or Avogadros constant. The concept of the mole can be used to convert between mass and number of particles.. Created by Sal Khan.a. trueb. false Question 8 of 10Which of these best describes the news media?OA. Media producers who are often covered in the news.OB. Media producers who are not associated with big companieO C. Media producers who cover and report on news stories.O D. Media producers who create events instead of texts. The Giving Tree of Errors 3.0 You are given a binary tree written as a sequence of parent child pairs. You need to detect any errors which prevent the sequence from being a proper binary tree and print the highest priority error. If you detect no errors, print out the lexicographically smallest 5-expression for the tree. Input Format Input is read from standard input and has the following characteristics: It is one line. Leading or trailing whitespace is not allowed. Each pair is formatted as an open parenthesis 'l', followed by the parent, followed by a comma, followed by the child, followed by a closing parenthesis')'. Example: (A,B) All values are single uppercase letters. Parent-Child pairs are separated by a single space. The sequence of pairs is not ordered in any specific way. Input (A,B) (B,C) (A,E) (BD cuemathTHE MATH EXPERTprobabilityprobabilityof B getting a job is 3/4. What is thethat only one of them gets the job. In the tropical rainforest plants must compete forThis plant is Macaranga hypoleuca. Compare its leaves to those of the plants around it. What is the relationship between the leaves of this plant, photosynthesis, and competition with neighboring plants Which describes Hoover's ideas about the Great Depression? A We are at the end of our string. There is nothing more we can do.B We need to wage a war against this emergency.C The only thing we have to fear, is fear itselfD We must act quickly.plsss help me it counts as almost my full grade How World War 1 shaped the modern world? How do you tell if a graph is exponential growth or decay? who is sitting next to mccarthy on the house floor? Why do you think the Catholic Church objected to Copernicus idea of the heliocentric universe (1 paragraph) i need some help. please help me Look at the diagram. Which of these gives the best account of how the islands were formed? (A) Magma rises over the hot spot and forms an island. The plate moves, and another island forms. (B) There are many hot spots along the plate boundaries. Each one forms a single island. (C) The plate boundaries collide and form many volcanoes along the plate boundaries. (D) As magma heats up in the mantle, it flows along the lithosphere and forms many islands Find the area of the floor of a quare room in quare meter whoe each ide i 800 cm help asap yallWhat is the solution for x2 + 4x > 77? x < 7 or x > 11 x < 11 or x > 7 7 < x < 11 11 < x < 7 Question 5/5Which of the following is NOT a common feature of afinancial institution? helpppppppppppppppppppp Write the equation for photosynthesis.(hint - there are answers/questions within this assessment that can help you)2PointsYou can write the equation using the chemical formulas or words and do not forget to include the arrow in the middle of your equation.(Please tell me exactly what you mean/are referring to in your answer as I cannot assume what you are telling me in your answer.) What was Thomas Jefferson's point of view in the Declaration of Independence? a baseball and a golf ball have the same momentum. which has the greater kinetic energy? is the main tool where you can access setup and configuration options for your windows server, as well as options for managing roles and features.