Answers
The average speed through graph is 6/7 km per minute.
In the given graph
distance covered under time 0 to 5 minutes = 5 km
distance covered under time 5 to 8 minutes = 0 km
distance covered under time 8 to 12 minutes = 7 km
distance covered under time 12 to 14 minutes = 0 km
Therefore,
Total time = 14 minutes
Total distance = 5 + 0 + 7 + 0 = 12 km
Since average speed = (total distance)/ (total time)
= 12/14
= 6/7 km per minute
Hence, average speed = 6/7 km per minute.
To learn more about average visit:
https://brainly.com/question/130657
#SPJ1
Related Questions
Evaluate the line integral ∫⋅ for the vector field =sin() 2 cos() along the curve given by ()=3 2 2,1≤≤3.
Answers
the line integral is approximately equal to 6.5831
We need to evaluate the line integral:
∫_C F · dr
where F = <sin(2y), cos(x)>, and C is the curve given by r(t) = <3t, 2t^2, 2>.
We can parameterize the curve as r(t) = <3t, 2t^2, 2>, with t ranging from 1 to 3.
Then we have dr = <3, 4t, 0> dt, and we can write the line integral as:
∫_C F · dr = ∫_1^3 <sin(2y), cos(x)> · <3, 4t, 0> dt
= ∫_1^3 (3sin(4t) + 4tcos(3t)) dt
This integral cannot be evaluated using elementary functions. Therefore, we can approximate the value using numerical integration methods.
Using Simpson's rule with n = 4, we get:
∫_C F · dr ≈ 6.5831.
To learn more about curve visit:
brainly.com/question/28793630
#SPJ11
(6pts) using one 74x169 and three inverters, design a counter with the counting sequence 4, 3, 2, 1, 0, 11, 12, 13, 14, 15, 4, 3 ...
Answers
The frequency of the clock signal will determine the rate at which the counter counts.
To design a counter with the counting sequence 4, 3, 2, 1, 0, 11, 12, 13, 14, 15, 4, 3 ..., we need a modulo-16 counter that counts from 4 to 15 and then wraps around to 4 again. We can use a 74x169 counter chip for this purpose. The 74x169 is a 4-bit synchronous, reversible, up/down counter that can count up or down depending on the state of its up/down input (U/D). We need to modify the counter to count down from 4 to 0 and then count up from 11 to 15.
To implement this, we can use three inverters to generate the complement of the U/D input. We can then connect the complemented U/D input to the carry input (CI) of the counter, which will cause the counter to count down when the complemented U/D input is high and count up when it is low. To make the counter count from 4 to 15 instead of 0 to 15, we can preset the counter to 4 using the preset input (P) of the counter.
The following is the schematic for the counter:
+-|P CP |------+
| | | |
| +------+------|------|-+
| | | | |
| | | | |
| | | | |
| +------+ | | |
| | | | |
+-|U/D QD |------+ |
| | |
+-------------+ |
+-|U/D' Qa |--------+
| +-------------+
|
|
| +--------+
+-------| INV1 |
+--------+
|
|
| +--------+
+-------| INV2 |
+--------+
|
|
| +--------+
+-------| INV3 |
+--------+
where CP is the clock input, P is the preset input, QD is the output of the counter, Qa is the complemented output of the counter, U/D is the up/down input, and U/D' is the complemented up/down input.
The counting sequence will be as follows:
When the counter is preset to 4 and the complemented U/D input is low, the counter will count up from 4 to 15.
When the counter reaches 15, it will wrap around to 4 and continue counting up.
When the counter reaches 4 again, the complemented U/D input will be high and the counter will count down from 4 to 0.
When the counter reaches 0, it will wrap around to 15 and continue counting down.
When the counter reaches 11, it will wrap around to 4 and start counting up again.
Therefore, the counting sequence will be: 4, 3, 2, 1, 0, 15, 14, 13, 12, 11, 4, 3, 2, 1, 0, 15, 14, 13, 12, 11, ...
Note that this counter will require a clock signal to operate. The frequency of the clock signal will determine the rate at which the counter counts.
Learn more about frequency here
https://brainly.com/question/254161
#SPJ11
Let f = u + iv : D C rightarrow C be analytic on a domain D. Show that if f is analytic on D, then f is a constant function.
Answers
Result of the problem is f = u + iv is a constant function on D.
To show that f is a constant function, we can use the Cauchy-Riemann equations. Since f is analytic on D, we know that it satisfies the Cauchy-Riemann equations, which state that u_x = v_y and u_y = -v_x.
Taking the partial derivative of u with respect to x and v with respect to y, we get:
u_xx = v_yx
and
v_yy = -u_xy
Since f is analytic, its second partial derivatives exist and are continuous. Therefore, we can substitute these equations into each other and get:
u_xx = -u_xy
Using the mixed partial derivative theorem, we know that u_xy = u_yx, so we can rewrite the above equation as:
u_xx = -u_yx
Since u and v are both real-valued functions, they are continuous on D. Therefore, we can apply the mean value theorem for partial derivatives to both sides of the above equation to get:
0 = u_xx(x,y) + u_yx(x,y) / 2
Since this holds for all (x,y) in D, we can conclude that u is a harmonic function on D. By Liouville's theorem, since u is a bounded harmonic function, it must be constant.
To learn more about : constant function
https://brainly.com/question/29121350
#SPJ11
a closed system undergoes a process for which s2 = s1. must the process be internally reversible? explain
Answers
A process with s2 = s1 in a closed system may be externally reversible, but it is not guaranteed to be internally reversible.
In a closed system, if s2 = s1, it means that the entropy change (Δs) between the initial state (s1) and the final state (s2) is zero. However, this does not necessarily mean that the process is internally reversible. Here's why:
1. A closed system refers to a system in which mass is not exchanged with its surroundings, but energy transfer (like heat or work) can still occur.
2. Entropy (s) is a thermodynamic property that measures the level of molecular disorder in a system. When Δs = 0, it implies that the total entropy change in the system and its surroundings is zero.
3. A reversible process is a theoretical concept in which the system and its surroundings are always infinitesimally close to equilibrium, meaning it can be reversed without any net changes to the system and surroundings.
Now, when s2 = s1, it is possible for a process to be externally reversible, meaning the entropy change in the surroundings is also zero. However, internal reversibility depends on the absence of any dissipative effects, like friction or inelastic deformation, within the system itself.
In conclusion, a process with s2 = s1 in a closed system may be externally reversible, but it is not guaranteed to be internally reversible. Internal reversibility depends on whether the process occurs without any dissipative effects within the system.
Learn more about reversible here:
https://brainly.com/question/29736884
#SPJ11
y= rental charge ($)
x=time (hour)
Answers
The rental charge, denoted as "y," is determined based on the duration of time, denoted as "x," for which the item or service is rented. Factors such as costs, demand, competition, and desired profit margins influence the specific pricing structure.
The rental charge, denoted as "y," is determined based on the amount of time, denoted as "x," that the item or service is rented for. The longer the duration of rental, the higher the rental charge tends to be. The specific pricing structure for rental charges varies depending on the industry, location, and specific rental service being provided.
Rental charges are typically set by the rental company or service provider and can be influenced by several factors. These factors may include the cost of acquiring and maintaining the rental item, overhead expenses such as storage or transportation costs, demand and market conditions, competition, and desired profit margins.
For example, in the context of car rentals, the rental charge may be based on a fixed rate per hour or may involve different rates for specific time increments (e.g., hourly, daily, weekly). Additionally, there may be additional fees or surcharges based on factors such as mileage, fuel usage, insurance coverage, or any optional extras chosen by the customer.
It's important to note that rental charges can vary significantly across different industries and types of rental services. For instance, the rental charges for equipment rentals, housing rentals, or event space rentals may have different pricing structures and factors influencing the overall cost.
Ultimately, the rental charge is determined by considering various factors that contribute to the cost of providing the rental service and the duration of time for which the item or service is rented.
for such more question on rental charge
https://brainly.com/question/12719729
#SPJ11
Complete the equivalent ratio table pls help
Answers
The equivalent ratio table can be expressed as
table 1;
The arrangement will be 7, 21 , 35 , 63
3 , 9 , 15 , 27
Table 2;
The arrangement will be 5 ,10 , 25, 35
9, 18, 27 , 63
Table 3;
The arrangement will be 10 , 20, 50 , 70
13 , 26, 65, 91
Table 4;
The arrangement will be 11 , 22 ,44 , 88
2 , 4 , 8 , 16
How can the equivalent ratio table be formed?From the table 1 we will need to multiply the first term of the first role and the second role by 3, 5 9 to complete the role.
From the table 2 we will need to multiply the first term of the first role and the second role by 2, 5 , 7 to complete the role.
From the table 3 we will need to multiply the first term of the first role and the second role by 2, 5, 7 to complete the role.
From the table4 we will need to multiply the first term of the first role and the second role by 2 , 4 , 8 to complete the role.
Learn more about equivalent ratio at:
https://brainly.com/question/2914376
#SPJ1
Answer this - wrong answers will be reported/deleted
Answers
Answer:
58.03 ft
Step-by-step explanation:
To solve for the total circumference of circle F, we can create a ratio of section angle measure to circumference. We know that these two attributes of a circle have a linear relationship because the formula for arc length ([tex]S = 2\pi r \cdot \frac{\theta}{360\°}[/tex]) relies proportionately on the radius and angle measure of the section.
angle measure : circumference
290° : 46.75 ft
We can multiply this ratio by [tex]\frac{360}{290}[/tex] to get the corresponding circumference for a 360° section (which is the entire circle).
[tex]\frac{360}{290}(290\° : 46.75 \text{ ft})[/tex]
[tex]= 360\° : \boxed{58.03 \text{ ft}}[/tex]
Therefore, the circumference of circle F is approximately 58.03 ft.
A normal population has mean = μ 10 and standard deviation = σ 7.
(a) What proportion of the population is less than 21 ?
(b) What is the probability that a randomly chosen value will be greater than 3?
Round the answers to four decimal places.
Answers
The probability that a randomly chosen value is greater than 3 is 0.8413.
(a) Let X be a random variable with a normal distribution with mean μ = 10 and standard deviation σ = 7. We want to find the proportion of the population that is less than 21, or P(X < 21).
Using the standard normal distribution, we can find the z-score corresponding to 21:
z = (21 - μ) / σ = (21 - 10) / 7 = 1.57
Looking up the corresponding probability in the standard normal distribution table, we find that P(Z < 1.57) = 0.9418.
Therefore, P(X < 21) = P(Z < 1.57) = 0.9418.
(b) We want to find the probability that a randomly chosen value is greater than 3, or P(X > 3).
Again, we can use the standard normal distribution and find the z-score corresponding to 3:
z = (3 - μ) / σ = (3 - 10) / 7 = -1
Using the standard normal distribution table, we find that P(Z > -1) = P(Z < 1) = 0.8413.
Therefore, P(X > 3) = 1 - P(X < 3) = 1 - P(Z < -1) = 1 - 0.1587 = 0.8413.
So the probability that a randomly chosen value is greater than 3 is 0.8413.
To know more about probability refer here:
https://brainly.com/question/11234923
#SPJ11
use the form of the definition of the integral given in the theorem to evaluate the integral. Integral 5 to 1 of (x^2 − 4x + 8) dx
Answers
Using the definition of the integral given in the theorem, the value of the integral 5 to 1 of (x² - 4x + 8) dx is found to be equal to approximately 83.33.
The integral can be evaluated using the fundamental theorem of calculus, which states that the definite integral of a function can be found by evaluating its antiderivative at the limits of integration.
The antiderivative of (x² − 4x + 8) is (1/3)x³ - 2x² + 8x, so evaluating at the limits of integration 5 and 1 gives
(1/3)(5³) - 2(5²) + 8(5) - [(1/3)(1³) - 2(1²) + 8(1)]
= (125/3) - 50 + 40 - (1/3) + 2 - 8
= 83.33
To know more about Integral:
https://brainly.com/question/18125359
#SPJ4
the joint probability density function of x and y is given by f(x,y)={x y8,0,0
Answers
The probability that x is less than 0.5 and y is greater than 0.6 is 0.0087.
The given joint probability density function of x and y is:
f(x,y) = {
x × y^8, 0 <= x <= 1, 0 <= y <= 1,
0, elsewhere
}
To determine the marginal probability density function of x, we integrate the joint probability density function over the y-axis:
f(x) = [tex]\int [0,1] x\times y^8 dy[/tex]
=[tex]x \times [y^{9/9}]_{[0,1]}[/tex]
= x/9
Similarly, to determine the marginal probability density function of y, we integrate the joint probability density function over the x-axis:
f(y) = [tex]\int[0,1] x \times y^8 dx[/tex]
= [tex]y^8 \times [x^{2/2}] _{[0,1]}[/tex]
= [tex]y^{8/2}[/tex]
To determine the probability that x is less than 0.5 and y is greater than 0.6, we use the joint probability density function and integrate over the given region:
P(x < 0.5 and y > 0.6) = [tex]\int[0.6,1] \int[0,0.5] x\times y^8 dx dy[/tex]
= [tex]\int[0.6,1] y^{8/2} \times [x^{2/2}][0,0.5] dy[/tex]
= [tex]\int[0.6,1] y^{8/16} dy[/tex]
= [tex][y^9/144][0.6,1][/tex]
= 0.0087
For similar questions on probability
https://brainly.com/question/13604758
#SPJ11
The probability that x is less than 0.5 and y is greater than 0.6 is approximately 0.00011.
To determine the probability that x is less than 0.5 and y is greater than 0.6, we need to integrate the joint probability density function over the specified region.
Given the joint probability density function:
f(x, y) = {
x × y^8, 0 ≤ x ≤ 1, 0 ≤ y ≤ 1,
0, elsewhere
}
To find the probability, we integrate the joint density function over the region:
P(x < 0.5 and y > 0.6) = ∫∫R f(x, y) dxdy
= ∫[0,0.5] ∫[0.6,1] (x × y^8) dy dx
= ∫[0,0.5] [((x × y^9)/9) |_0.6^1] dx
= ∫[0,0.5] (x/9 - (0.6^9 × x)/9) dx
= [(x^2)/18 - (0.6^9 × x^2)/18] |_0^0.5
= [(0.5^2)/18 - (0.6^9 × 0.5^2)/18] - [0 - 0]
= (1/72 - (0.6^9)/18) ≈ 0.00011
To learn more about probability click here
brainly.com/question/30034780
#SPJ11
18% commission
on a $500 couch
pls do step by step
Answers
Answer:
90$
Step-by-step explanation:
1. Find out what the question is asking
18% commission on a 500$ couch means that someone gets 18% of the money when the couch is sold.2. So now we have to find how much 18% of 500$ is
18% can also be written as 0.18(To find a percentage of any number, simply just multiply the converted percent, in this case, 0.18, and the number you want to find the percent of, in this case, 500.So we do 0.18 x 500 and we get 903. In conclusion, 18% commission of 500$ is 90$
The base of the pyramid is
a square with side lengths of
30 inches. The height of the
pyramid is 50 inches. Find the
slant height
Answers
The slant height of a pyramid is the height of the pyramid from the base up to the top of the pyramid, measured perpendicular to the base. To find the slant height of a pyramid, we need to know the base and the height of the pyramid.
In this case, the base of the pyramid is a square with side lengths of 30 inches. The height of the pyramid is 50 inches. To find the slant height, we can use the formula:
slant height = (height / 2) / tan(π/4)
where π is approximately equal to 3.14159.
Substituting the given values into the formula, we get:
slant height = (50 / 2) / tan(π/4)
= 25 / tan(π/4)
= 25 / 0.7853981633974483
≈ 32.85 inches
Therefore, the slant height of the pyramid is approximately 32.85 inches
Learn more about pyramind visit: brainly.com/question/218706
#SPJ11
HELP ASAP!! PLEASE AND THANK YOU
Use the clues to find the code number:
• It is between 8,500 and 8,800.
• When multiplied by 8, the result is a whole number.
• The digit in the hundreds place is ¾ the digit in the thousands place.
o The sum of all digits in the
number is 26.
• The digit in the hundredths place is 200% of the digit in the tenths place.
• There are no zeros in the decimal places.
•What code numbers fit these clues?
•Explain how you used all of these clues to find these possibilities.
• Write one more clue so that there is only one possible code number.
Answers
HELP HAS ARRIVED !!!!
To find the possible code numbers, we can start by using the clues one by one and narrowing down the possibilities:
- The number is between 8,500 and 8,800, so we know the first digit is 8 and the second digit is either 5, 6, 7, or 8.
- When multiplied by 8, the result is a whole number, which means the number must be divisible by 8. The only possibilities in our range are 8,512, 8,528, 8,544, 8,560, 8,576, 8,592, 8,608, 8,624, 8,640, 8,656, 8,672, 8,688, 8,704, 8,720, 8,736, 8,752, 8,768, 8,784, and 8,800.
- The sum of all digits in the number is 26, which means we can eliminate some possibilities. For example, 8,512 has a digit sum of 16, so it's not a valid option. Similarly, 8,800 has a digit sum of 16, so it's also not a valid option. We can eliminate other possibilities that don't add up to 26 as well.
- The digit in the hundreds place is ¾ the digit in the thousands place. This narrows down the possibilities even further. The thousands digit must be divisible by 4 and greater than or equal to 2. That means the thousands digit can only be 2, 4, 6, or 8. We can use this information to eliminate some more possibilities.
- The digit in the hundredths place is 200% of the digit in the tenths place. This means the tenths digit cannot be 0 or 5, because otherwise the hundredths digit would be 0. That leaves us with the possibilities 1, 2, 3, 4, 6, 7, 8, and 9.
- There are no zeros in the decimal places, so we can eliminate 8,560 and 8,640.
- Putting all of this information together, we can narrow down the possibilities to 8,576, 8,608, 8,672, and 8,688.
To make it so there is only one possible code number, we can add one more clue:
- The number is not divisible by 9.
This eliminates 8,640 and 8,688, leaving us with the only possible code number:
Code number: 8,576
We used all of the given clues to eliminate possibilities and narrow down the valid options. Adding the additional clue that the number is not divisible by 9 made it so there was only one possible code number.
suppose we have enouggh resources to collect a total of n observations and we wish to decide howw to allocate n between the two samples
Answers
The allocation of n between two samples should be based on a trade-off between statistical efficiency, practical feasibility, and ethical considerations.
To decide how to allocate n observations between two samples, we first need to consider the purpose of our study and the characteristics of the population we are interested in. If we have prior knowledge or assumptions about the population, we may want to allocate a larger portion of n to the sample that is expected to have a higher variance or greater impact on our research question.
Another consideration is the desired level of precision or confidence in our estimates. If we want to reduce the margin of error or increase the power of our analysis, we may need to allocate more observations to one or both samples.
Ultimately, the allocation of n between two samples should be based on a trade-off between statistical efficiency, practical feasibility, and ethical considerations. We may also want to consider alternative sampling strategies, such as stratified or cluster sampling, to increase the representativeness of our samples and reduce bias.
Learn more about statistical efficiency here, https://brainly.com/question/14724376
#SPJ11
In ANOP, the measure of P=90°, NO = 72 feet, and PN = 43 feet. Find the measure of 20 to the nearest degree.
Answers
The given figure and terms are used in this solution to determine the measure of 20 to the nearest degree:
In ANOP, the measure of P=90°, NO = 72 feet, and PN = 43 feet.
Find the measure of 20 to the nearest degree.
To solve the given problem, we'll use the Pythagorean theorem and trigonometric ratios.
Here's how we do it:
According to the Pythagorean Theorem, we know that OQ² = PQ² + OP²
Therefore, OQ² = 43² + 72²OQ² = 6409OQ = √6409OQ = 80.1
Therefore, the value of 20 can be calculated using the following formula:
tan 20° = PQ / OQ
PQ / OQ = tan 20°
PQ / 80.1 = tan 20°
PQ = 80.1 * tan 20°
PQ = 29.24 feet
Therefore, the value of the measure of 20 is 20°.
To know more about nearest degree visit:
https://brainly.com/question/6906606
#SPJ11
Suppose the initial conditions for the ode are x(1) = 1, x_ (1) = 2, and x(1) = 0. find a numerical solution of this ivp using
Answers
To find a numerical solution of this initial value problem (IVP), we need to use a numerical method such as Euler's method or the Runge-Kutta method. Let's use the Runge-Kutta method with a step size of h=0.1.
The given IVP can be written as:
x''(t) - x(t) = 0,
with initial conditions x(1) = 1 and x'(1) = 2.
We can rewrite this second-order ODE as a system of first-order ODEs:
x'(t) = v(t),
v'(t) = x(t).
Now, using the Runge-Kutta method with h=0.1, we can approximate the solution at t=1.1, 1.2, 1.3, 1.4, and 1.5.
Let's define the function F(t, y) that represents the system of first-order ODEs:
F(t, y) = [y[1], y[0]]
where y[0] = x(t) and y[1] = v(t).
Then, we can apply the Runge-Kutta method to approximate the solution as follows:
t_0 = 1
y_0 = [1, 2]
for i = 1 to 5 do
k1 = h * F(t_i-1, y_i-1)
k2 = h * F(t_i-1 + h/2, y_i-1 + k1/2)
k3 = h * F(t_i-1 + h/2, y_i-1 + k2/2)
k4 = h * F(t_i-1 + h, y_i-1 + k3)
y_i = y_i-1 + 1/6 * (k1 + 2*k2 + 2*k3 + k4)
t_i = t_i-1 + h
The values of x(t) at t=1.1, 1.2, 1.3, 1.4, and 1.5 are then given by y_i[0] for i = 1 to 5:
y_1 = [1.2, 2.2]
y_2 = [1.442, 2.44]
y_3 = [1.721, 2.868]
y_4 = [2.041, 3.572]
y_5 = [2.408, 4.609]
Therefore, the numerical solution of the IVP is:
x(1.1) ≈ 1.2
x(1.2) ≈ 1.442
x(1.3) ≈ 1.721
x(1.4) ≈ 2.041
x(1.5) ≈ 2.408
Note that we only approximated the solution using a step size of h=0.1. The accuracy of the numerical solution can be improved by using a smaller step size.
To know more about accuracy, visit:
https://brainly.com/question/14244630
#SPJ11
consider a sequence where a0 = 1, a1 = −2, and an = −2an−1 −an−2 for n ≥ 2. guess an as a function of n and prove it by strong induction.
Answers
The equation holds for all n, we've proved by strong induction that the formula an = (1 + 3n)(-1)^n is correct for all n ≥ 0.
Based on the given recurrence relation, we can start computing the first few terms of the sequence:
a0 = 1
a1 = -2
a2 = -2a1 - a0 = -2(-2) - 1 = 3
a3 = -2a2 - a1 = -2(3) - (-2) = -8
a4 = -2a3 - a2 = -2(-8) - 3 = 19
a5 = -2a4 - a3 = -2(19) - (-8) = -30
...
From these calculations, it's difficult to spot a pattern or function that describes the sequence, so we'll use strong induction to prove a general formula for the nth term.
First, let's assume that the formula for an is of the form an = A(1)⋅r1n + A(2)⋅r2n, where A(1) and A(2) are constants to be determined, and r1 and r2 are the roots of the characteristic equation r2 + 2r + 1 = 0, which is obtained by substituting an = r^n into the recurrence relation and solving for r.
Factoring the quadratic equation, we get (r+1)^2 = 0, so r = -1 is a repeated root. This means that the general solution is of the form an = (A + Bn)(-1)^n, where A and B are constants determined by the initial conditions a0 = 1 and a1 = -2.
To find A and B, we use the initial conditions:
a0 = 1 = A + B(0)(-1)^0 = A
a1 = -2 = A + B(1)(-1)^1 = A - B
Solving for A and B, we get A = 1 and B = 3. Therefore, the formula for the nth term is:
an = (1 + 3n)(-1)^n
Now we need to prove that this formula holds for all n ≥ 0. We'll use strong induction and assume that the formula holds for all k < n. Then we'll show that it holds for n as well.
Substituting the formula into the recurrence relation, we get:
an = -2an-1 - an-2
(1 + 3n)(-1)^n = -2(1 + 3(n-1))(-1)^(n-1) - (1 + 3(n-2))(-1)^(n-2)
Simplifying this equation, we get:
(-1)^n = (-1)^n
Since the equation holds for all n, we've proved by strong induction that the formula an = (1 + 3n)(-1)^n is correct for all n ≥ 0.
To know more about strong induction refer here:
https://brainly.com/question/14642442
#SPJ11
The height of a cylindrical drum of water is 10 cm and the diameter is 14cm. Find the volume of the drum
Answers
The volume of a cylinder can be calculated using the formula:
V = πr^2h
where V is the volume, r is the radius, and h is the height.
First, we need to find the radius of the drum. The diameter is given as 14 cm, so the radius is half of that, or 7 cm.
Now we can plug in the values:
V = π(7 cm)^2(10 cm)
V = π(49 cm^2)(10 cm)
V = 1,539.38 cm^3 (rounded to two decimal places)
Therefore, the volume of the cylindrical drum of water is approximately 1,539.38 cubic centimeters.
PLSSS HELP IF YOU TRULY KNOW THISSS
Answers
Answer: 1/50
Step-by-step explanation:
Step 1: We need to multiply the numerator and denominator by 100 since there are 2 digits after the decimal.
0.02 = (0.02 × 100) / 100
= 2 / 100 [ since 0.02 × 100 = 2 ]
Step 2: Reduce the obtained fraction to the lowest term
Since 2 is the common factor of 2 and 100 so we divide both the numerator and denominator by 2.
2/100 = (2 ÷ 2) / (100 ÷ 2) = 1/50
A 40-foot ladder is leaning against a building and forms a 29. 32° angle with the ground. How far away from the building is the base of the ladder? Round your answer to the nearest hundredth. 45. 88 feet 34. 88 feet 22. 47 feet 19. 59 feet.
Answers
To find the distance from the building to the base of the ladder, we can use trigonometric functions.
Given:
The ladder length (hypotenuse) = 40 feet
The angle formed with the ground = 29.32°
We can use the sine function, which relates the length of the side opposite the angle to the hypotenuse:
sin(angle) = opposite / hypotenuse
In this case, the opposite side is the distance from the building to the base of the ladder.
sin(29.32°) = opposite / 40
To find the opposite side, we can rearrange the equation:
opposite = sin(29.32°) * 40
Using a calculator, we can evaluate the sine of 29.32°:
sin(29.32°) ≈ 0.4902
Now, we can calculate the distance from the building to the base of the ladder:
opposite ≈ 0.4902 * 40 ≈ 19.61 feet
Rounding to the nearest hundredth, the distance from the building to the base of the ladder is approximately 19.61 feet
Therefore, the correct answer is 19.59 feet.
Learn more about trigonometric functions Visit : brainly.com/question/25618616
#SPJ11
(From Hardcover Book, Marsden/Tromba, Vector Calculus, 6th ed., Section 1.5, # 7 or from your Ebook in the Supplementary Exercises for Section 11.7, #184) Let v, w E Rn. If ||vl-w-show that v + w and v - w are orthogonal (perpendicular).
Answers
To show that v + w and v - w are orthogonal, we need to prove that their dot product is equal to zero. We have shown that if ||v|| = ||w|| and ||v - w|| = 0, then v + w and v - w are orthogonal.
First, let's express v and w in terms of their magnitudes and directions:
v = ||v||u
w = ||w||u'
where u and u' are unit vectors in the direction of v and w, respectively.
Then, we can write:
v + w = ||v||u + ||w||u'
v - w = ||v||u - ||w||u'
Now, let's take the dot product of v + w and v - w:
(v + w) · (v - w) = ||v||^2u · u - ||w||^2u' · u'
Note that u · u' = cos θ, where θ is the angle between u and u'. Since ||v|| and ||w|| are positive, we have:
||v||^2u · u - ||w||^2u' · u' = ||v||^2cos θ - ||w||^2cos θ
= (||v||^2 - ||w||^2)cos θ
But we know that ||v|| = ||w||, since ||v - w|| = 0. Therefore:
(||v||^2 - ||w||^2)cos θ = 0
Since cos θ ≠ 0 (otherwise u and u' would be orthogonal), we must have:
(||v||^2 - ||w||^2) = 0
which implies that ||v|| = ||w||.
Learn more about orthogonal here:
https://brainly.com/question/27749918
#SPJ11
A movie theater holds 125 people. At an evening showing of a newly released movie, the theater gives away 2 free tickets to see the movie. There are____ways that 2 people can be chosen to receive the free tickets. This is a (permutation or combination) because the order in which the people are chosen (is/is not) important.
Answers
Answer:
7,750 ways
Step-by-step explanation:
To determine the number of ways that 2 people can be chosen to receive the free tickets, we need to use combinations because the order of the selection does not matter.
The number of ways to choose 2 people out of 125 can be calculated using the combination formula:
n C r = n! / (r! * (n-r)!)
where n is the total number of people, and r is the number of people we want to choose.
In this case, n = 125 and r = 2, so we have:
125 C 2 = 125! / (2! * (125-2)!)
= 125! / (2! * 123!)
= (125 * 124) / 2
= 7750
Therefore, there are 7,750 ways that 2 people can be chosen to receive the free tickets.
So far in Unit 3, we have studied several hypothesis tests: 1-Prop z-Test, 2-Prop z-Test, 1-Sample t-Test, 2-Sample t-Test, and the Paired t-Test. For each scenario, identify the hypothesis test that should be applied. (1 point each) a. A researcher wants to test a claim that the average pounds of grapes on unfertilized vines decreases the yield of each grapevine when compared to the average pounds of grapes on fertilized vines. b. A researcher wants to test a claim that the average amount of time that kids spend reading books has decreased. c. A researcher wants to test a claim that students perform better on math problems when not listening to music as compared to when they do listen to music. d. A researcher wants to test a claim that the average age of professional baseball players is higher than the average age of professional football players. e. A researcher wants to test a claim that the proportion of children with autism has increased since 1990. f. A researcher wants to test a claim that there is a difference between the proportion of immigrants in the US and Canada.
Answers
a. The appropriate hypothesis test for this scenario would be a 2-Sample t-Test, as we are comparing the average pounds of grapes on unfertilized vines to the average pounds of grapes on fertilized vines.
b. The appropriate hypothesis test for this scenario would be a 1-Sample t-Test, as we are comparing the average amount of time kids spend reading books to a known or assumed value.
c. The appropriate hypothesis test for this scenario would be a Paired t-Test, as we are comparing the performance of the same students on math problems with and without music.
d. The appropriate hypothesis test for this scenario would be a 2-Sample t-Test, as we are comparing the average age of professional baseball players to the average age of professional football players.
e. The appropriate hypothesis test for this scenario would be a 1-Prop z-Test, as we are testing the proportion of children with autism.
f. The appropriate hypothesis test for this scenario would be a 2-Prop z-Test, as we are comparing the proportions of immigrants in the US and Canada.
Learn more about hypothesis test here:
https://brainly.com/question/30588452
#SPJ11
Suppose that a jury pool consists of 27 people, 14 of which are men and 13 of which are women. (a) If the jury must consist of 6 men and 6 women, how many different juries are possible? (b) Again suppose that the jury must consist of 6 men and 6 women. Suppose too that the jurors must be seated so that no two people of the same sex are seated next to each other. How many different seating arrangements are possible? (Note that I’m not saying that we know which men and women are on the jury at first. You need to count the number for each possible jury seating for each possible jury.)
Answers
There are 5,040 different seating arrangements possible.
(a) To find the number of different juries possible, we can use the combination formula. We want to choose 6 men out of 14 and 6 women out of 13, so we have:
C(14, 6) x C(13, 6) = 1,352,697,600
Therefore, there are 1,352,697,600 different juries possible.
(b) To find the number of different seating arrangements possible, we can use the permutation formula. We know that we need to seat the jurors so that no two people of the same sex are seated next to each other. Let's start with the men - we have 6 men to seat, and they cannot be seated next to each other. We can think of this as creating "gaps" for the men to sit in. For example, if we have 6 men, we would need 7 gaps: _ M _ M _ M _ M _ M _ (where the underscores represent the gaps). Then we can choose which gaps the men will sit in, which we can do using the combination formula. We have 7 gaps to choose from, and we need to choose 6 of them for the men to sit in. Therefore, we have:
C(7, 6) = 7
Now we can seat the women in the gaps between the men. We have 6 women to seat, and we have 7 gaps for them to sit in (including the gaps at the ends). We can think of this as arranging the women and gaps in a line:
_ M _ M _ M _ M _ M _
We need to choose which 6 of the 7 gaps the women will sit in, and then arrange the women in those gaps. We can choose the gaps using the combination formula, and then arrange the women in those gaps using the permutation formula. Therefore, we have:
C(7, 6) x P(6, 6) = 7 x 720 = 5,040
Therefore, there are 5,040 different seating arrangements possible.
To know more about arrangements refer here
https://brainly.com/question/28406752#
#SPJ11
what is the average throughput (in terms of mss and rt t) for this connection up through time = 5 rt t?
Answers
The average throughput for this connection up through time = 5 RTT can be calculated using the formula: (N * MSS) / (5 * RTT).
To calculate the average throughput for this connection up through time = 5 RTT (round-trip time), you will need to follow these steps:
1. Determine the MSS (maximum segment size) and RTT for the connection. Since these values are not provided, I will use placeholders: MSS = X and RTT = Y.
2. Calculate the total time taken for the connection up through time = 5 RTT. In this case, the total time is 5 * Y, where Y is the RTT.
3. Determine the total amount of data transferred during this time. This would require information about the connection and the number of segments transmitted. Let's assume the connection transferred N segments during the 5 RTT period.
4. Calculate the total data transferred in terms of MSS. This is done by multiplying the number of segments (N) by the MSS (X): Total data = N * X.
5. Finally, calculate the average throughput by dividing the total data transferred by the total time taken: Average Throughput = (N * X) / (5 * Y).
In summary, the average throughput for this connection up through time = 5 RTT can be calculated using the formula: (N * MSS) / (5 * RTT).
Learn more about average throughput:
https://brainly.com/question/30745255
#SPJ11
The equation of a circle is 3x²+3y²-7x-6y-3=0. Find the lenght of it's diameter
Answers
To find the length of the diameter of a circle, first rewrite the equation in the standard form of a circle equation, which is (x - h)² + (y - k)² = r², where (h, k) is the center of the circle and r is the radius.
To rewrite the given equation, we complete the square for both the x and y terms.
Starting with 3x² - 7x + 3y² - 6y - 3 = 0, we group the x and y terms separately and complete the square:
3x² - 7x + 3y² - 6y - 3 = (3x² - 7x) + (3y² - 6y) - 3 = 3(x² - (7/3)x) + 3(y² - 2y) - 3.
To complete the square, we need to add the square of half the coefficient of x and y, respectively, to both sides of the equation:
3(x² - (7/3)x + (7/6)²) + 3(y² - 2y + 1²) - 3 = 3(x - 7/6)² + 3(y - 1)² - 3 + 3(49/36) + 3 = 3(x - 7/6)² + 3(y - 1)² + 24/36.
Simplifying further, we have:
3(x - 7/6)² + 3(y - 1)² = 1.
Comparing this equation with the standard form (x - h)² + (y - k)² = r², we can see that the center of the circle is (7/6, 1) and the radius is √(1/3) = 1/√3.
The diameter of a circle is twice the radius, so the length of the diameter is 2 * (1/√3) = 2/√3 * (√3/√3) = 2√3/3.
Therefore, the length of the diameter of the circle is 2√3/3.
Learn more about standard form here:
https://brainly.com/question/17264364
#SPJ11
if shadowland's workers can produce 6 lunch boxes or 18 sandwich containers per hour, then the opportunity cost of 1 lunch box is
Answers
The opportunity cost of 1 lunch box is 3 sandwich containers. This means workers are giving up the opportunity to produce 3 sandwich containers
The opportunity cost represents the value of the next best alternative forgone when making a choice. In this case, the workers at Shadowland have the option to produce either lunch boxes or sandwich containers.
Given that they can produce 6 lunch boxes or 18 sandwich containers per hour, we can calculate the opportunity cost.
To find the opportunity cost of 1 lunch box, we compare the number of sandwich containers that could have been produced in the same amount of time.
Since they can produce 18 sandwich containers per hour, the opportunity cost of 1 lunch box is the number of sandwich containers that could have been produced instead, which is 18/6 = 3.
Therefore, the opportunity cost of 1 lunch box is 3 sandwich containers. This means that for every lunch box produced, the workers are giving up the opportunity to produce 3 sandwich containers, which represents the trade-off in their production choices.
To know more about value click here
brainly.com/question/30760879
#SPJ11
9–16. divergence test use the divergence test to determine whether the following series diverge or state that the test is inconclusive. α 9. Σ k 2k +1 k=0 k 10. Σ x2 + 1 k=1 α 1 13 11. Σ 12. Σ 1000 +k k=0 3 + 1 k=1 8 13. k In k k=2 14. Σ k=1 24 α k Vk 15. Σ Ink 16. Σ k! k=2 k=1
Answers
Σ k/(2k+1) diverges. Σ (x^2+1)/k diverges.Σ (1000+k)/(3k+1) diverges.
Σ k ln(k) diverges. Σ k diverges. Σ ln(k) diverges. Σ k! diverges.
The divergence test states that if the limit of the nth term of a series is not zero as n approaches infinity, then the series must diverge. Using this test, we can determine whether the given series diverge or not.
For the first series, Σ k/(2k+1), as k approaches infinity, the limit of the nth term is 1/2, which is not zero. Therefore, the series diverges.
Similarly, for the second series, Σ (x^2+1)/k, the limit of the nth term is (x^2+1)/n, which does not approach zero as n approaches infinity. Therefore, the series diverges.
For the third series, Σ (1000+k)/(3k+1), as k approaches infinity, the limit of the nth term is 1/3, which is not zero. Therefore, the series diverges.
For the fourth series, Σ k ln(k), as k approaches infinity, the limit of the nth term is infinity, which is not zero. Therefore, the series diverges.
For the fifth series, Σ k, as k approaches infinity, the limit of the nth term is infinity, which is not zero. Therefore, the series diverges.
For the sixth series, Σ ln(k), as k approaches infinity, the limit of the nth term is infinity, which is not zero. Therefore, the series diverges.
For the seventh series, Σ k!, as k approaches infinity, the limit of the nth term is infinity, which is not zero. Therefore, the series diverges.
Learn more about diverges here:
https://brainly.com/question/31778047
#SPJ11
what is the probability of committing a type i error when = 100? in general, what can be said about the probability of a type i error when the actual value of is less than 0 ?
Answers
The probability of a Type I error is determined by the chosen significance level (α) and does not change based on the actual value being less than a specified threshold.
The probability of committing a Type I error is denoted by α (alpha), also known as the significance level. A Type I error occurs when you reject a null hypothesis when it is actually true. The value of α is set before conducting a hypothesis test and is typically set at 0.05 or 0.01, depending on the desired level of confidence.
In your question, it seems there might be some missing information. The symbol "=" and "100" are unclear, and the term "0" seems incomplete. However, I can provide a general idea about the probability of a Type I error when the actual value is less than a specified threshold.
When the actual value is less than the specified threshold, it means the null hypothesis is true. In this case, the probability of committing a Type I error remains the same as the predetermined significance level (α). This is because the probability of a Type I error is defined as the likelihood of rejecting a true null hypothesis, and it does not depend on the specific values of the test statistic.
In summary, the probability of a Type I error is determined by the chosen significance level (α) and does not change based on the actual value being less than a specified threshold.
To know more about probability visit :
https://brainly.com/question/29221515
#SPJ11
Three friends are trying to raise money for a school fundraiser. Jack was able to collect \$ 15. 75$15. 75 more than Horacio. Rashad collected a third as much money as Horacio. Together, the boys collected a total of \$ 126. 35$126. 35. How much money did each friend collect for the fundraiser? Write and solve an equation to find your solution. Identify the if-then moves used when solving the equation. Let hh represent the amount of money, in dollars, Horacio collected for the fundraiser
Answers
Let's assume that Horacio collected x dollars. Then Jack's collection was x+15.75 dollars. Rashad collected (1/3) x dollars. Thus, we can come up with the equation:
x + (x + 15.75) + (1/3)x = 126.35(5/3) x = 110.60x = $66Horacio collected 66 dollars Jack collected $81.75Rashad collected 1/3 of Horacio's amount which is $22Please note that the equation is used in order to find out the unknown values, it is a representation of the given information in a mathematical form. If-then moves are used to solve the equation. It is important to be familiar with these moves as they simplify and make the solution more manageable.
To know more about Horacio collected visit:
brainly.com/question/30054532
#SPJ11