What's the difference between an exe file and an msi file?

Answer:

C

Explanation:

I'm not sure though

Answer:

Add the computer case to the Workspace.

Install the motherboard and connect the front panel connectors to it.

Install a power supply and connect it to the motherboard.

Install the processor and memory in dual channel mode.

Install the SSD hard drive and SATA hard drive.

Install the optical drive.

Connect a monitor, mouse, and keyboard.

Boot into the BIOS configuration utility to verify that all hardware is installed correctly.

Note: It is important to refer to the motherboard manual for specific instructions and compatibility of hardware components. It is also important to follow proper safety precautions when handling computer components and installing them.

Explanation:

The specific steps and hardware requirements will vary depending on the motherboard and other components being used.

It is the circuit board that establishes the several sorts of storage devices, memory modules, and graphics cards that can be connected to your computer.

It also distributes electricity from your power source and links all of your hardware to your processor.

A general overview of the steps involved in building a computer:

Thus, in order to ensure that the finished product is dependable and performs as intended, it is crucial to refer to the manufacturer's documentation and adhere to best practices for computer assembly.

For more details regarding computer, visit:

https://brainly.com/question/21080395

#SPJ2

The sampling result is more accurate the smaller the sample group, but the process takes longer if there are many samples. Ideal 20 bulbs per sampling is the solution to the above inquiry.

In a facility that produces light bulbs, Jared is in charge of production. Over the weekend, 2648 light bulbs were produced in this plant. The amount of the sample directly affects how accurate the test is.

The sample size would be the greatest compared to the other possibilities if Jared's sample consisted of every 20th light bulb.

As a result, the most accurate test sample is one that includes every 20th light bulb.

In theory, the sampling result should be more accurate the smaller the sample population, but if there are more samples, it will take longer.

Ideal 20 light bulbs per sample is the solution to the aforementioned inquiry.

To learn more about lightbulbs refers :

brainly.com/question/4538488

#SPJ4

Smartbook recharge mode can be accessed at any time during a smartbook assignment attempt is False

To learn more about Smartbook refer to:

https://brainly.com/question/14436827

#SPJ4

Cursive and continuous cursive are often considered to be the best handwriting styles for students to learn.

The two handwriting techniques that are generally regarded as the finest for students to acquire are cursive and continuous cursive.

Narrow right margins, a clear right slant, and lengthy, tall T-bars are all common writing characteristics. Other characteristics of the writers of the writing were also revealed by other handwriting characteristics.

Even writing with a pen and paper requires the use of muscle memory. Writing nicely will be more difficult for you if you don't regularly practise. Your handwriting will get much better if you spend 10 to 15 minutes each day writing neatly and slowly.

There are three of them: print, pre-cursive, and cursive.

1. Cursive

2. Pre-cursive

3. Print

To learn more about handwriting refer to:

https://brainly.com/question/1643608

#SPJ1

A computer network that is optimized to process a significant amount of data messages with little delay is said to be low latency.

To achieve the best latency, higher frequency bands or 5G wave can be used, the higher the frequency, the lower the latency. Just as more water flows through a wide river than a small, narrow stream, a high-bandwidth network can generally deliver more information than a low bandwidth network in the same amount of time. Because this can make the network feel faster, high bandwidth networks and connections are often referred to as high-speed. At some point, the best way to get lower latency is to invest in faster hardware. A faster CPU and GPU can significantly reduce latency across the system. Using the game and processing latencies provided by the reflex SDK in-game If your game latency is high, consider choosing a faster CPU.

To learn more about Low latency  please click on below link.

https://brainly.com/question/29781666

#SPJ4

Methods are found in classes. We must first add a run function to our class before we can start writing our code. Our program's execution starts in the run method.

Our Java programs have been written thus far as a collection of commands. But a genuine Java program needs a few extra components. Our commands will now be written inside of a Karel class and a run function.

public void run()

{

   for(int i = 0; i < 1000; i++)

   {

       if (frontIsClear())

       {

           move();

       }

       else

       {

           turnAround();

           for (int j = i/2; j > 0; j--)

           {

               move();

           }

           turnAround();

           break;

       }

   }

   putBall();

}

Learn more about execution here-

https://brainly.com/question/29677434

#SPJ4

On your PC, look for the Outlook.exe file. Select Properties from the context menu of the Outlook.exe file, then the Compatibility tab.

Outlook may display the "cant start Microsoft Outlook" error if your file is corrupted. To fix the error, you can repair the file. Using the Inbox Repair Tool, you can fix the Personal Storage Table (PST) file from Microsoft (ScanPST.exe). The installation location for Outlook contains the ScanPST file.

Holding down the Ctrl key while choosing the Outlook shortcut will launch Outlook in safe mode. Select Yes to acknowledge that you want to launch Outlook in safe mode in the warning dialogue box that pops up.

To know more about Compatibility tab visit:-

https://brainly.com/question/13262931

#SPJ4

A travel photographer takes pictures to document an area's landscape and culture. so the correct option is 3.

In the field of photography, there are various types of photographers who specialize in different subjects and styles. One such type is a travel photographer. Travel photographers capture images that document the landscape, culture, and people of a particular area. They often travel to different locations, both domestic and international, to capture the essence of a place through their photographs.

Travel photographers focus on showcasing the unique aspects of a destination, including its natural beauty, architecture, traditions, and local customs. They aim to tell a story through their images and provide viewers with a glimpse into the culture and lifestyle of the places they visit.

Learn more about types of photographers here:

https://brainly.com/question/33718579

#SPJ14

You can create a new virtual hard disk when you create a virtual machine. Virtual disks machines created along with virtual machines are dynamically expanding disks.

In Server Manager, select Tools>Hyper-V Manager. Right-click CORPSERVER. Select New>Virtual Machine. In the Before You Begin window, click Next .In the Name field, enter VM1 for the virtual machine. Select Store the virtual machine in a different location to modify the path to the virtual machine files. In the Location field, verify the location for the virtual machine; then click Next. Make sure Generation 1is selected; then click Next. In the Startup memory field, enter the amount of memory to use for the virtual machine; then click Next. In the Connection field, select the network connection from the drop-down list; then select Next.

In the Name field, enter VM2 for the virtual machine. Select Store the virtual machine in a different location to modify the path to the virtual machine files. In the Location field, verify the location for the virtual machine; then click Next. Select Generation, then click Next. In the Startup memory field, enter the amount of memory to use for the virtual machine. Select Use Dynamic Memory for this virtual machine; then click Next. In the Connection field, select the network connection from the drop-down list; then click Next. Make sure Create a virtual hard disk is selected. Modify the virtual hard disk name, location, and sizes needed; then click Next. Make sure that Install an operating system later is selected; then click Next. Click Finish to create the virtual machine.

To learn more about Virtual Disks please click on below link.

https://brainly.com/question/28444960

#SPJ4

Answer:

The primary objective of HCI is to design systems that make them accessible, usable, efficient, and safe for anyone and everyone. This implies that people with a wide range of capabilities, expertise, and knowledge can easily use HCI-designed systems. It also encompasses people with disabilities.

Explanation:

A generator converts mechanical energy to electrical energy by using a conducting metal loop turning in a  gravitational field.

To learn more about Gravitational field refer to:

https://brainly.com/question/19391185

#SPJ4

Naming a person SELECT Name — Joining with the submissions table from the candidates table, FROM CANDIDATES INNER JOIN SUBMISSIONS

When speaking with a database, SQL is utilized. The standard language for relational database management systems, according to ANSI (American National Standards Institute). For example, updating data on a database or retrieving data from a database are actions that are carried out using SQL statements.

SQL undoubtedly qualifies as a programming language by virtue of the definition of a programming language as having a particular vocabulary and syntax. It is, however, a Domain-Specific Language and so ineligible to be considered a General Purpose Language (GPL) (DSL).

To know more about INNER JOIN visits :-

https://brainly.com/question/28160914

#SPJ4

Your name will appear on the sale deed if you are the property's lone or joint owner.

Up to two years after the filing period has passed, a late application for a residence homestead exemption may be submitted, including one for a disabled or senior applicant.

The 15% homestead exemption is currently available to all homeowners, even those who are elderly or disabled. This implies that their municipal tax valuation can be reduced by 15% or $5,000, whichever is greater. It is required that you attach a copy of the property owner's driver's license or other government-issued form of identity.

To know more about applicant visit:-

https://brainly.com/question/29039611

#SPJ4

The preliminary investigation's goal is to establish the reality of any deficiencies or problems with the current system. Some of the project's feasibility considerations may be reexamined by the project team.

A preliminary analysis, which is the first stage of a project at the beginning to establish whether the concept is practical, any alternative solutions that are suggested, and the cost-benefit analysis are all included in phase 1 of the systems development life cycle.

We'll have a system proposal after the analysis process. The system proposal includes graphics that show the proposed system and a comprehensive list of requirements.

To know more about analysis visit:-

https://brainly.com/question/17248028

#SPJ1

phone number (plural telephone lines) the technical setup that enables a single phone to connect to the network and make separate calls.

  On the shelf, expand Routers. drag the DSL router to the work area. Above the router, select back to switch to the back view of the router. On the shelf, expand the wires. Select twisted pair cable with RJ11 connectors. In the selected component window, drag a connector to the RJ11 port of the router. In the Selected Component window, drag the other connector to the empty phone port on the wall jack. On the shelf, select the power adapter. In the Selected Component window, drag the DC power connector to the power port of the DSL router. In the Selected Component window, drag the AC power plug to the power outlet. Connect the router.

To learn more about telephone line please click on below link.

https://brainly.com/question/18647460

#SPJ4

-Adjust the Workspace to include the cable modem.-Join the WAN connection with the modem.-Connect the modem.

To verify the network card settings, enter the command ipconfig /all at the command prompt. Under the relevant adapter, the IP address and MAC address are shown as Physical Address and IPv4 Address, respectively. 1 Evaluating the extent of a proposed change need to be the first step in the network change management process. Find out who utilises those services and whose services may be impacted. The phrase "blast radius" is commonly used to characterise the potential impact of a change, including any potential drawbacks.

To learn more about modem click the link below:

brainly.com/question/14619697

#SPJ4

1 a system that often holds the middle tier of a multiple tier system.

Usually found on mainframe:  these are found in the legacy systems. As they are used in computers

Old systems that often require hard to use command languages:

Programs are developed by writing instructions in commands , but in legacy it is hard to use

System that most often have detailed information that can be accessed by a system at a higher tier:

Yes it is true , found in all systems Not only in legacy systems.

2) The ease with which the system runs after a failure is corrected

Access to networks: It is security to devices . If no security then it will lead to thread.

Access to end user devices: anyone is using the device can access the information and change. To avoid these threads security to end user DEVICES.

How thrid party vendors ensure security: Security for the thrid party users like controls reports and auditing

Access to servers: it covers all the important data and server resources.

Conclusion:

1. A legacy system is all of the following EXCEPT:

    A system that often holds the middle tier of a multiple-tier system.

2. All of the following relate to securing assets EXCEPT:

   The ease with which the system runs after a failure is corrected.

The option that show a statement that did not relate to securing assets is (a) access to networks .

Assets in programming is a folder contains critical information about the website.  To make sure the security of the website, the developer has to ensure all the permitted data to assets is secure. Because of the data that flow the assets are the data from third party, data from end-user and compiler. All of this access need to be checked or secure. The most common way to secure in VMC model are:

Learn more about web development here

https://brainly.com/question/13261383

#SPJ4

She tackled the Vietnam war, nuclear weapons and the meaning of life

What makes Mafalda famous?

She addressed issues such as the Vietnam War, nuclear weapons, and the purpose of life. Mafalda’s impact rose during the years she was published in Argentine newspapers (and in compendiums of the cartoons). It grew to the point where she was even influencing children’s eating habits. Mafalda is a cultural icon, not just a six-year-old comic strip character.

Teresa Rotemberg created her own dance group, Company MAFALDA, in Zurich in 1999. She has consistently developed dance theatre productions with the group since then, typically with multinational casts of varied dancers.

To learn more about MAFALDA to refer:

https://brainly.com/question/11426436

#SPJ4

Enumerative induction involves making an argument from premises about a subset of a group's members to a broad generalisation about the entire group

She addressed issues such as the Vietnam War, nuclear weapons, and the purpose of life. Mafalda’s impact rose during the years she was published in Argentine newspapers (and in compendiums of the cartoons). It grew to the point where she was even influencing children’s eating habits. Mafalda is a cultural icon, not just a six-year-old comic strip character.

Teresa Rotemberg created her own dance group, Company MAFALDA, in Zurich in 1999. She has consistently developed dance theatre productions with the group since then, typically with multinational casts of varied dancers.

To learn more about MAFALDA refer:

brainly.com/question/11426436

#SPJ4

The identical line that is written on the screen following the child class value, 150, is presented as follows: x's final value is 150.

#include <stdio.h>  //to use input output functions

#include <unistd.h> //provides access to the POSIX OS API

int main() { //start of main function

  int x;  //declare an int type variable x

  x = 100;  // sets the value of x to 100

  int r = fork();  //calls fork() method to create a new process. r is used to store the value returned by fork()

  if(r<0){  //if fork() returns -1 this means no child process is created

          fprintf(stderr, "Error");}     //prints the error message using standard error stream

 else if (r == 0)     {  //if fork returns 0 this means child process is created

      printf("This is child process\n");  //prints this message

      x = 150;  //changes value of x to 150

      printf("Value of x in child process: %d\n", x);     }  //prints the new value of x in child process

  else      {

      printf("This is parent process\n");  //if r>0

      x = 200;  //changes value of x to 200

      printf("Value of x in parent process: %d\n", x);     }  } //prints the new value of x in parent process

However, the identical line that is written on the screen following the child class value, 150, is presented as follows:

x's final value is 150.

To learn more about identical line refer to:

https://brainly.com/question/17925458

#SPJ4

Answer:

You might want to visit the printer manufacturer’s websites and see if any updates for your device drivers is available. Updating Drivers is known to fix most of such Windows errors.

Additionally it could be because of the IO Completion Port, which appears when you try to continue the Read from the socket when it has most likely been closed. Disable the COM port in the Device Manager and Enable it again. Other than this you can try the SFC & DISM commands and restart the Pc and see if it is helpful .

Explanation:

Application performance depends on other things like cache and other features.

The definition of cache is a process carried out by the system or browser to temporarily store data or information so that the loading process is faster.

According to the usage environment, cache is divided into two types, namely hardware cache and software cache. Then, if divided again, software cache also has several types, one of which is web cache.

Basically, all cache functions are the same, which is to speed up loading times by downloading and storing data in temporary storage space.

By knowing the types, later we can better understand which areas we need to improve to optimize the device.

Below, we will describe the general types of caches.

1.Hardware caches

Hardware cache is memory that is inside the microprocessor and is a physical component of the processor itself. Hardware cache has several types, namely:

2. Cache Software

In contrast, software cache is a storage space that exists within a computer application or program to speed up specific functions of that program.

The following types of software cache:

3. Browser Cache

This type is actually included in the software cache. However, browser caching is the one we come across most often, and we think this type deserves a separate explanation.

Learn more about cache at https://brainly.com/question/23708299.

#SPJ4

Answer:

First, click on your Start Menu and type cmd in the search box and press enter. A black and white window will open where you will type ipconfig /all and press enter. There is a space between the command ipconfig and the switch of /all. Your ip address will be the IPv4 address.

Explanation: Search

Use the spanning-tree vlan vlan-id root secondary global configuration mode command to create a different root bridge if needed.

With this command, the switch's priority is set to the predetermined value of 28,672. As a result, in the event that the primary root bridge fails, the backup switch will take over as the root bridge. The root bridge is determined by the switch with the lowest priority, or BID (the lower the priority value, the higher the priority). For instance, setting the priority to a lower value than the other switches on the network will guarantee that a certain switch is always the root bridge.

Learn more about network here-

https://brainly.com/question/29350844

#SPJ4

The claim that cloud suites are accessible from any location with Internet access and are kept on your hard drive is accurate.

When each of N subjects has more than two measurement variables, the correlation analysis tool is especially helpful. It offers a correlation matrix as an output table that displays the value of CORREL (or PEARSON) applied to every potential pair of measurement variables.

The user interface for Microsoft Office features customary menus and toolbars. Vector images are created and edited using these tools. QR codes are images that often have a black background.

To know more about cloud suites visit:-

https://brainly.com/question/1413949

#SPJ4

Answer:

Restart the computer and see if the issue persists.

Check for updates and install any available updates.

Run a virus scan to ensure the computer is not infected.

Check for any error messages and take note of them.

Check the Device Manager to see if any hardware is causing a problem.

Check the Event Viewer for any system or application errors.

Check for any loose cables or connections.

Run a diagnostic test on the hardware, if available.

Check for any third-party software conflicts.

If the problem persists, consider restoring the computer to a previous point or contacting a professional for further assistance.

Explanation:

A methodical method of problem-solving is troubleshooting. The purpose of troubleshooting is to identify the root cause of an issue and provide instructions on how to fix it.

A methodical method of problem-solving is troubleshooting. The purpose of troubleshooting is to identify the root cause of an issue and provide instructions on how to fix it.

There are a few simple actions you may take to help locate and fix the problem. You can use the general troubleshooting steps listed below:

Thus, these are just a few of the many troubleshooting steps that can be taken to address a malfunctioning computer.

For more details regarding troubleshooting, visit:

https://brainly.com/question/30048504

#SPJ2

The statement about java that's true is b. A Java GC process is responsible to take care of heap memory and deallocate the space occupied by those objects no longer used. In Java, the JVM (Java Virtual Machine) handles memory management by using a process called Garbage Collection (GC).

The GC process is responsible for identifying and freeing up memory that is no longer being used by the application. This process occurs automatically and in the background, without the need for developers to explicitly create a new thread or write code to deallocate memory. The JDK (Java Development Kit) also provides an interface for developers to use in managing the heap memory, but this is not used for deallocating memory. Instead, it can be used for monitoring and tuning the performance of the GC process.

Learn more about java, here https://brainly.com/question/29897053

#SPJ4

The way to fix "files required to play gta online could not be downloaded from the rockstar games service" is given below

Below are a few steps that you can try to fix the "files required to play GTA Online could not be downloaded from the Rockstar Games service" error:

Lastly, Contact Rockstar Games Support: If you still have the issue, you can contact the Rockstar Games support team for further assistance. They may have a solution or a fix for the problem.

Learn more about games  from

https://brainly.com/question/849192

#SPJ1

In Hyper-V, there are two different kinds of checkpoints in windows server : normal checkpoints and production checkpoints. Both record the data, state, and configuration information.

Standard Checkpoints: capture a snapshot of the virtual machine's status in terms of memory at the time the checkpoint is initiated. With systems that replicate data between various nodes, like as Active Directory, a snapshot is not a full backup and may result in problems with data consistency.

A bootable version of an operating system is a system checkpoint (OS). A checkpoint is an image taken by a computer at a certain moment in time.

To know more about windows server visit:-

https://brainly.com/question/24241966

#SPJ4