Answer:
Please find the answer in the explanation
Explanation:
When a Newton's Cradle with three marbles is pulled back and released, the mechanical energy is converted to potential elastic energy.
When a collision happens between the marbles causing a cycle of repeated motion, The elastic potential energy is converted to kinetic energy.
This transfer of energy will last for several cycles. If there is any energy lost, then the kinetic energy must have been converted to thermal energy or heat energy
How does changing the number of neutrons affect an atom?
Answer:
If you change the number of neutrons in an atom, you get an isotope of the same element. The addition of a neutron can make an atom radioactive. When you change the number of protons in an atom, you will change the atom from one element to a different element.
Explanation:
The characteristics of the atomic nucleus allow to find the answer for the effect of the change of neutrons in an atoms is
The change in neutrons changes the atomic mass.
A chemical element is made up of protons, neutrons and electrons; the first two are in the atomic nucleus and the electrons are in orbits around them.
The number of protons corresponds to the atomic number and its change changes the type of element.
The neutrons that are neutral charge together with protons form the mass of the atom, as neutrons are neutral if the number does not affect the type of atom, but if its atomic mass changes.
Elements with the same atomic number, but different atomic mass, different number of neutrons are called isotopes; in general all elements have isotopes, for example hydrogen has an isotope called deuterium that has a neutral and another radioactive isotope called tritium that has two neutrons.
In conclusion using the characteristics of the atomic nucleus we find the answer for the effect of the change of neutrons in an atoms is
The change in neutrons changes the atomic mass.
Learn more here: brainly.com/question/11673503
Someone please help me!
Answer:
a
Explanation:
PLEASE HELP ME ASAP!!!!!
Answer the question below. Use the rubric in the materials for help if needed.
After the American Revolution, why did many citizens, including the Anti-Federalists, argue that it was necessary to add a bill of rights to the U.S. Constitution? Use details to
support your answer.
Answer:
Federalists argued that the Constitution did not need a bill of rights, because the people and the states kept any powers not given to the federal government. Anti-Federalists held that a bill of rights was necessary to safeguard individual liberty.
Explanation:
i need one more brainliest
What is the mass of a car if 4500N of force is used to accelerate it at a rate of 3.0m/s?
Answer:
The answer is 15,000 kgExplanation:
The mass of the car can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force
a is the acceleration
From the question we have
[tex]m = \frac{45000}{3} \\ [/tex]
We have the final answer as
15,000 kgHope this helps you
Which dwarf planet orbits the Sun far beyond Pluto, taking 560 years per orbit?
Answer:
Eris
Explanation:
The object, temporarily designated 2003UB313 and later named Eris, orbits the sun about once every 560 years, its distance varying from about 38 to 98 AU.
Answer:
me
Explanation:
Which answer choice correctly describes the ball's kinetic and potential energy? Group of answer choices The ball has more potential energy at position X than at position Z. The ball has more kinetic energy at position Y than at position W. The potential energy and kinetic energy of the ball are equal at position X. The potential energy and kinetic energy of the ball are greatest at position Z.
Answer:the ball has more kinetic energy at position Y than position X
Answer: G. The ball has more KE at position Y than at position W.
Explanation:
I’m just adding the picture here if you’re not sure if the question is the one you’re looking for. I take not credit for the answer, im just adding the picture.
If a train goes at constant speed of 40 miles per hour for one hour, then at constant
speed of 55 miles per hour for two hours, what is its average speed at the train?
Answer: because the train goes 72 mph for 2 hours
Explanation:
does the train go 72mph for 2 hours as well? if so the answer would be 324 because you have to add 90 twice scene it goes at that speed for 2 hours thats 180. assuming the train goes 72 mph for 2 hours it would be 144. then add 180 and 144 and you get 324 merry christmas and a happy newyear to you and your family
2. A police car drives from a police station to a distance of 170 km in 4 hours. He then stops at a gas station for 1 hour to fill gas and rest. Then the driver goes for 100 Km in 1 hour 30 minutes to his final destination.
a. What is the speed of the police car between the police station and the gas station?
b. What is the speed of the police car between the gas station and the final destination?
c. What is the average speed of the police car?
Answer:
a.42.5 km/h or .71 km/m
b. 66.7 km/h or 1.1repeating km/m
c.41.5 km/h or .69 km/m
Explanation:
These are all average speed problems, meaning you divide the distance traveled by the time [tex]s=\frac{d}{t}[/tex]
A. 170km/4hrs or 170km/240 mins
B. 100km/1.5hrs or 100km/90mins
C. The only tricky thing here is the question seems like it wants the speed for all of the information given, so you do include the one hour that he stops
270km/6.5 hrs or 270km/390 mins
To get employees to work longer hours, employers often offer __________ in the form of extra pay.
A.
costs
B.
benefits
C.
incentives
D.
consequences
Answer:
C
Explanation:
I took the test
4. Hijackers are taking over a plane, They tell the pilot to get to Spain as fast as possible. The plane goes from 900
km/hr (beginning speed) to 1140 km/hr (final speed) in just 6 seconds. What is the acceleration of the plane?
A motorbike reaches a speed of 20 m/s over 60m, whilst
accelerating at 3m/s?, determine the bike's initial speed.
Initial speed = 2√10 m/s
Further explanationLinear motion consists of 2: constant velocity motion with constant velocity and uniformly accelerated motion with constant acceleration
An equation of uniformly accelerated motion
V = vo + at
Vt² = vo² + 2a (x-xo)
x = distance on t
vo / vi = initial speed
vt / vf = speed on t / final speed
a = acceleration
vf=20 m/s
d = 60 m
a = 3 m/s²
[tex]\tt vf^2=vi^2+2.ad\\\\20^2=vi^2+2\times 3\times 60\\\\400=vi^2+360\\\\40=vi^2\\\\vi=\sqrt{40}=2\sqrt{10}~m/s[/tex]
Please help my test is going on. Please answer both (i) and (ii).
Answer:
i. 7.5 m
ii. 15000 N
Explanation:
Area under vt graph shows the displacement
so area of triangle ABE= 1/2×15×2
=7.5 m
ii) F=ma
here, m=1000kg
and a=v-u/t
=15-0/1
a=15
F=1000×15=15000N
a box is pushed along the ground with a force of 20N. If the box is pushed 0.5M.How much work done is on it?
Answer:
10J
Explanation:
work (W)= force (F)× distance (d)
W= 20N × o.5m
=10J (Joule)
Answer:
10 joules(j)
Explanation:
Mass refers to the gravitational force on the matter in contact with the surface of a planet. true or false
Answer:
False
Explanation:
The mass of something does not depend on gravity. A planet has a constant gravitational force. Earth's is 9,80 N/kg. The moon, on the other hand, is 1,6 N/kg. the number of kilograms of something doesn't change if you go from one planet to another and since mass is measured in kilograms, mass doesn't change, therefore it does not refer to gravity. Mass refers to the quantity of matter in an object. It is weight that refers to the gravitational force on an object, since it is measured in newtons, and the amount of newtons per kilogram changes from planet to planet due to different gravity constants
Why should you never do an exercise such as the bench press without a spotter?
Answer:
you could hurt yourself
Explanation:
Answer
You should never do an exercise such as the bench press without a spotter because you could hurt yourself or push your self too much.
Explanation:
paper craft wall hanging how is it ?
Answer:
Nice
Explanation:
How is ice more reflective than water??
Answer:
Because it has more texture and is solid. Its like glass
Explanation:
Answer:
Why is ice more reflective (has higher albedo) than liquid water? They're both the same substance (water). Is something quantum mechanical involved?
Explanation:
In fact ice is slightly less reflective than water. The reflectivity is related to the refractive index (in a rather complicated way) and the refractive index of ice is 1.31 while the refractive index of water is 1.33. The slightly lower refractive index of ice will cause a slightly lower reflectivity. In both cases the reflectivity is about 0.05 i.e. at an air/water or air/ice surface about 5% of the light is reflected.
2
How is acceleration related to force when mass is constant, according to Newton's second law of motion?
A. The acceleration is directly proportional to the net force,
OB
The acceleration is inversely proportional to the net force.
C. The acceleration is inversely proportional to the square root of the net force.
OD
The acceleration is directly proportional to the square root of the net force.
Reset
Next Question
Answer:
A
Explanation:
The acceleration of an object is directly proportional to its net force.
[tex]a = \frac{f}{m} [/tex]
Answer:
Correct choice: A. The acceleration is directly proportional to the net force
Explanation:
Newton's Second Law of Motion
According to Newton's second law of motion, the acceleration of an object is directly proportional to the net force F and inversely proportional to the object's mass m:
[tex]\displaystyle a=\frac{F}{m}[/tex]
Correct choice: A. The acceleration is directly proportional to the net force
what are two different examples of positive exeleration
Answer:Accelerating your car to get up to speed on a freeway
An airplane accelerating to take off
Accelerating out of the starting blocks at a track meet
Explanation:
What is the weight of a body at a centre of Earth
“While the big bang theory is the most popular modern theory of how the universe formed, it is incomplete.” Which question does the big bang theory leave unanswered?
which one of the following is a derived SI unit?
A.newton B.meter C.mole d.Kilogram
Answer:
Meter
Explanation:
I'd say meters, cause it's the SI unit of length,
which is a Derived Quantity.
HELP RN PLEASSEEE!!! HELP!!
Choose all the answers that apply.
According to Newton's second law of motion:
1.objects at rest will remain at rest unless acted upon by an outside force
2.mass has an inverse relationship with acceleration
3.the greater the magnitude of force, the faster the acceleration
4.acceleration is caused by unbalanced forces
5.every action has an equal and opposite reaction
Five mL of ethanol has a mass of 3.9 g, and 5.0 mL of benzene has a mass of 44 g. Which liquid is denser?
Answer:
Benzene
Explanation:
A denser substance will have a higher or larger mass in the same volume. Therfore benzene will be a denser liquid as the mass is bigger in the same volume compared to ethonal.
You can also work this out by using the density formula which is mass of the substance over the unit of volume.
a car slows down from 50.0m/s to 20.0m/s in 60s what is the acceleration
Answer:
-2m/s^2
Explanation:
final velocity = 20m/s
initial velocity = 50 m/s
time taken = 60 s
20-50=30m/s
30/60 = -2
The measurement of how much matter an object contains is its
a. volume.
b. weight.
c. mass.
d. melting point.
Answer:
Mass is how much matter an object contains. Mass and weight are different measurements, although they may seem similar. Mass is measured by comparing one object to another object of known mass. Grams and kilograms are units we use to measure mass.
The measurement of quantity of matter in an object is mass ( optionC)
What is mass of a body?Mass of a body is defined as the quantity of matter(Solid, liquid or gas) contained in the given volume of the body.
Mass is a scalar quantity and also part of the fundamental quantities. It is measured in kilograms. Other units of mass include; gram tonnes e.t.c
Matter is anything that takes up space and can be weighed.
Therefore the quantity of matter in a body is
called mass.
learn more about mass of a body from
https://brainly.com/question/86444
#SPJ6
The photo shows dew drops that formed on the grass when temperatures
cooled during the night. Which change of state happened to form the dew?
A. Liquid to gas
B. Gas to liquid
C. Solid to gas
D. Gas to solid
Please help ASAP WILL GIVE BRAINLIEST
why is it important to use the correct number of significant digits when reporting the results of an experiment
A. So other scientist can see how spread out your data are
B. So other scientists can see how many separate trials you preformed
C. So other scientists can compare their experimental results with yours
D. So other scientistcan see how precise your measurements were
Answer:
D
Explanation: It makes the most sense. Plz mark brainliest
Answer:
D
Explanation:
So other scientist can see how precise your measurements are
Choose the law that BEST explains the example:
Throwing a ball with more force to increase acceleration is an example of Newton’s
first law?
2nd law
third law
none of these
Describe a way to separate a mixture of fine sand and table salt without having to directly sort tiny crystals using tweezers.
Answer:
you can add water to the mixture and dissolve the salt
The method used is by solubility which is dissolving the sand and salt mixture into water and heating.
This is just about methods of separations of mixtures.
There are three major methods that can be used to separate a mixture of sand from salt. They are;
- Physical separation by use of magnifying glass and tweezers.
- Dissolving the mixture in water
- Melting the salt
The first method can't be used because we are told to use another method.
In that case, we will use the second option which involves solubility.Now, salt is made up of sodium chloride which means it is an ionic compound and it will be soluble in water whereas sand is not soluble in water as it contains mainly silicon dioxide.
Now, the process involved in this separation is as follows;- Pour the mixture into a container.
- Add water to the mixture in the container.
- Turn on a burner and heat this solution in the container till the salt has dissolved completely.
- Then after that, turn of the burner and allow the heated solution to cool off a bit.
- After it has cooled a bit, pour the salt solution on top into another empty container.
- Then collect the sand out of the heated container.
- Then heat the salt solution until the water dries and only the salt is left.
Read more at; brainly.com/question/4853862