Which of the following is equal to m^5/2, for all value of m?

Answer:

384 cm²

Step-by-step explanation:

The surface area of the cube = 6 · a²

a = 8 cm

Let's solve

6 · 8² = 384 cm²

So, the total surface area of the cube is 384 cm².

True. The sum of squares due to regression (ssr) represents the amount of variation in the dependent variable that is explained by the independent variable(s) in a regression model. On the other hand, the sum of squares total (sst) represents the total variation in the dependent variable.

In fact, the coefficient of determination (R-squared) in a regression model is defined as the ratio of ssr to sst. It represents the proportion of the total variation in the dependent variable that is explained by the independent variable(s) in the model. Therefore, R-squared values range from 0 to 1, where 0 indicates that the model explains none of the variations and 1 indicates that the model explains all of the variations.

Understanding the relationship between SSR and sst is important in evaluating the performance of a regression model and determining how well it fits the data. If SSR is small relative to sst, it may indicate that the model is not a good fit for the data and that there are other variables or factors that should be included in the model. On the other hand, if ssr is large relative to sst, it suggests that the model is a good fit and that the independent variable(s) have a strong influence on the dependent variable.

Learn more about regression model here:

https://brainly.com/question/14983410

#SPJ11

The value of the integral is 9e^(-20).

First, we note that the Dirac delta function δ(t-5) has a value of 0 for all values of t except when t = 5, in which case it has a value of infinity such that the integral of δ(t-5) over any interval containing 5 is equal to 1. Therefore, we can rewrite the given integral as:

∫6−1(9 e−4t)δ(t−5) dt = (9 e^(-4*5)) δ(0) = (9 e^(-20)) * 1 = 9e^(-20)

Know more about integral here:

https://brainly.com/question/18125359

#SPJ11

To solve the given equation, we need to complete the square. First, we can factor out 4 from the equation to get 4(x^2 - 1/4x) = 0. To complete the square, we need to add (1/2)^2 = 1/16 to both sides of the equation. This gives us 4(x^2 - 1/4x + 1/16) = 1. We can simplify this to (2x - 1/2)^2 = 1/4.

Taking the square root of both sides gives us 2x - 1/2 = ± 1/2. Solving for x, we get x = 1/4 or x = 0. Therefore, the smaller value of x is 0 and the larger value of x is 1/4. Completing the square helps us find the values of x that satisfy the equation by manipulating it into a form that can be more easily solved.
To solve the equation 4x² - x = 0 by completing the square, follow these steps:

1. Divide the equation by the coefficient of x² (4): x² - (1/4)x = 0
2. Take half of the coefficient of x and square it: (1/8)² = 1/64
3. Add and subtract the value obtained in step 2: x² - (1/4)x + 1/64 = 1/64
4. Rewrite the left side as a perfect square: (x - 1/8)² = 1/64
5. Take the square root of both sides: x - 1/8 = ±√(1/64)
6. Solve for x to find the two values: x = 1/8 ±√(1/64)

The smaller value: x = 1/8 - √(1/64)
The larger value: x = 1/8 + √(1/64)

To learn more about Equation: brainly.com/question/29657983

#SPJ11

The minimum y-value of this quadratic equation [tex]y=\frac{2}{3} x^2 +\frac{5}{4}x -\frac{1}{3}[/tex] is 353/384 or 0.9193.

In Mathematics and Geometry, the standard form of a quadratic equation is represented by the following equation;

ax² + bx + c = 0

Next, we would solve the given quadratic equation by using the completing the square method;

[tex]y=\frac{2}{3} x^2 +\frac{5}{4}x -\frac{1}{3}[/tex]

In order to complete the square, we would re-write the quadratic equation and add (half the coefficient of the x-term)² to both sides of the quadratic equation as follows:

[tex]y=\frac{2}{3} x^2 +\frac{5}{4}x + (\frac{5}{8})^2 -\frac{1}{3} + (\frac{5}{8})^2\\\\y=\frac{2}{3} (x + \frac{15}{16} )^2-\frac{353}{384} \\\\[/tex]

Therefore, the vertex (h, k) is (15/16, -353/384) and as such, it has a minimum y-value of 353/384 or 0.9193.

Read more on quadratic functions here: brainly.com/question/14201243

#SPJ1

The CDF of Z is:

F_Z(z) = { 0 for z < 0

{ 1/2 - z/2 for 0 ≤ z < 1

{ 1 for z ≥ 1

(a) Let Z = X - Y. We will find the CDF and PDF of Z.

The CDF of Z is given by:

F_Z(z) = P(Z <= z)

= P(X - Y <= z)

= ∫∫[x-y <= z] f_X(x) f_Y(y) dx dy (by the definition of joint PDF)

= ∫∫[y <= x-z] f_X(x) f_Y(y) dx dy (since x - y <= z is equivalent to y <= x - z)

= ∫_0^1 ∫_y+z^1 f_X(x) f_Y(y) dx dy (using the limits of y and x)

= ∫_0^1 (1-y-z) dy (since X and Y are uniformly distributed over [0,1], their PDF is constant at 1)

= 1/2 - z/2

Hence, the CDF of Z is:

F_Z(z) = { 0 for z < 0

{ 1/2 - z/2 for 0 ≤ z < 1

{ 1 for z ≥ 1

To know more about random variables refer here:

https://brainly.com/question/17238189

#SPJ11

A system of vectors v1, v2, . . . , vn in a vector space v of dimension n is linearly independent if and only if it spans v.

Let's first assume that the system of vectors v1, v2, . . . , vn in v is linearly independent. This means that none of the vectors can be written as a linear combination of the others. Since there are n vectors and v has dimension n, it follows that the system is a basis for v. Therefore, every vector in v can be written as a unique linear combination of the vectors in the system, which means that the system spans v.

Conversely, let's assume that the system of vectors v1, v2, . . . , vn in v spans v. This means that every vector in v can be written as a linear combination of the vectors in the system. Suppose that the system is linearly dependent. This means that there exists at least one vector in the system that can be written as a linear combination of the others. Without loss of generality, let's assume that vn can be written as a linear combination of v1, v2, . . . , vn-1. Since v1, v2, . . . , vn-1 span v, it follows that vn can also be written as a linear combination of these vectors. This contradicts the assumption that vn cannot be written as a linear combination of the others. Therefore, the system must be linearly independent.

Learn more about linearly independent here

https://brainly.com/question/10725000

#SPJ11

Answer:

Venn diagram 2

Step-by-step explanation:

20 students passed the chemistry exam, 14 students passed the physics exam, and 6 students passed both of the exams. 20-6=14, 14-6=8. 14 students should be in the chemistry side, 8 students should be in the physics side, and 6 students should be in the middle.

The required expression for the total number of students at the college is 11x.

A Venn diagram is a diagram that uses overlapping circles or other patterns to depict the logical relationships between two or more groups of things.

According to the given Venn diagram,

1/2 of the students who learn the piano also learn the guitar (both piano and guitar) is x

Therefore, the expression for  students who learn the piano is 2x

and the expression for students who learn the guitar is 2x × 5 = 10x.

The expression for the total number of students at the college can be written as:

2x + 10x - x = 11x

Learn more about the Venn diagrams here :

brainly.com/question/1605100

#SPJ1

The complete question is attached below in the image:

(a) To find the probability of receiving two calls in a 5-minute interval of time, we need to first convert the arrival rate to a rate per 5 minutes. There are 12 five-minute intervals in an hour, so the arrival rate per 5 minutes is:

λ = (48 calls/hour) / (12 intervals/hour) = 4 calls/5 minutes

Using the Poisson distribution with parameter λ = 4, we can calculate the probability of receiving exactly 2 calls in a 5-minute interval:

P(X = 2) = (e^(-λ) * λ^2) / 2! = (e^(-4) * 4^2) / 2! ≈ 0.1465

Therefore, the probability of receiving two calls in a 5-minute interval is approximately 0.1465.

(b) To find the probability of receiving exactly 10 calls in 15 minutes, we need to first convert the arrival rate to a rate per 15 minutes. There are 4 fifteen-minute intervals in an hour, so the arrival rate per 15 minutes is:

λ = (48 calls/hour) / (4 intervals/hour) = 12 calls/15 minutes

Using the Poisson distribution with parameter λ = 12, we can calculate the probability of receiving exactly 10 calls in a 15-minute interval:

P(X = 10) = (e^(-λ) * λ^10) / 10! = (e^(-12) * 12^10) / 10! ≈ 0.1032

Therefore, the probability of receiving exactly 10 calls in 15 minutes is approximately 0.1032.

(c) The expected number of callers waiting by the time the agent completes the current call can be found using the formula:

E(N) = λ * t

where λ is the arrival rate and t is the time the agent takes to complete the call. Since λ = 48 calls/hour and the agent takes 5 minutes to complete the call, we need to convert the arrival rate to a rate per 5 minutes:

λ = (48 calls/hour) / (60 minutes/hour) * 5 minutes = 4 calls/5 minutes

Then, we can calculate the expected number of callers waiting:

E(N) = λ * t = 4 * 5 = 20

Therefore, we expect there to be 20 callers waiting by the time the agent completes the current call.

To Know more about  probability refer here

https://brainly.com/question/31722868#

#SPJ11

In order to solve the equation 14(x + 12) = 2, we need to follow the order of operations which is also known as PEMDAS which stands for Parentheses, Exponents, Multiplication and Division, and Addition and Subtraction. Let's solve the equation below step by step;

First of all, let us get rid of the parenthesis by multiplying 14 by each of the terms inside of the parenthesis;14(x + 12) = 2 Distribute 14 to both x and 12.14x + 168 = 2 Combine like terms.14x = -166 Now, we need to isolate the variable (x) by dividing both sides of the equation by 14, since 14 is being multiplied by x.14x/14 = -166/14 x = -83/7Therefore, the solution for the equation 14(x + 12) = 2 is x = -83/7 which is equal to -11.86 (rounded to the nearest two decimal places).The solution can be confirmed by substituting -83/7 for x in the original equation and ensuring that the equation is true.

To know more about   Parentheses visit:

brainly.com/question/3572440

#SPJ11

(250 sin(2nt/20) + 260) describes the largest Ferris wheel .Option D.

To determine the function that describes the largest Ferris wheel among the given options, we need to analyze the equations and understand how they affect the vertical position of the carriage on the Ferris wheel.

In these equations, "n" represents a constant and "t" represents time in minutes.

First, let's focus on the sine function. The sine function oscillates between -1 and 1, so multiplying it by a positive coefficient will scale the oscillation up or down. The coefficient determines the amplitude, which represents the maximum displacement from the equilibrium position.

Comparing the coefficients of the sine function in each option, we can see that Option B has the largest coefficient, which is 200. This implies that Option B has the largest amplitude among the given options, making it a good candidate for representing the largest Ferris wheel.

Next, let's examine the constants added to the sine function. These constants determine the vertical shift of the carriage's position. In this case, we are interested in finding the Ferris wheel with the highest position off the ground.

Comparing the constants in each option, we find that Option D has the highest constant, which is 260. This means that when time is zero, the carriage's position in Option D is already 260 feet off the ground.

Based on our analysis,  (250 sin(2nt/20) + 260) describes the largest Ferris wheel among the given options. It has the highest amplitude (250) and the highest constant (260), indicating a greater height and larger vertical motion for the carriage on the Ferris wheel. So Option D is correct.

For more question on wheel visit:

https://brainly.com/question/12676036

#SPJ8

Note the correct options of the given question are

Option A: 100 sin(2nt/30) + 110

Option B: 200 sin(2nt/30) + 210

Option C: 100 sin(2nt/20) + 110

Option D: 250 sin(2nt/20) + 260

The equivalent annual cost of one packing machine, considering the required rate of return of 12 percent, is approximately $24,673.

To calculate the equivalent annual cost of one packing machine, we need to consider both the initial cost of the machine and the operating costs over its lifespan, taking into account the required rate of return.

Let's break down the costs:

Initial cost of the machine: $136,000

Operating cost per year: $6,000

Lifespan of the machine: 4 years

Required rate of return: 12%

To calculate the equivalent annual cost, we can use the concept of Present Value (PV) and the formula for the present value of an annuity.

PV = C × (1 - [tex](1+r)^{-n}[/tex]) / r

Where PV is the present value, C is the annual cost, r is the required rate of return, and n is the lifespan of the machine in years.

First, let's calculate the present value of the operating costs:

PV_operating_costs = $6,000 × (1 - [tex](1+0.12)^{-4}[/tex]) / 0.12

PV_operating_costs ≈ $19,371

Next, let's calculate the present value of the initial cost:

PV_initial_cost = $136,000 /[tex](1+0.12)^{4}[/tex]

PV_initial_cost ≈ $79,321

Now, let's sum up the present values of the operating costs and the initial cost to get the equivalent annual cost:

Equivalent annual cost = (PV_operating_costs + PV_initial_cost) / 4

Equivalent annual cost = ($19,371 + $79,321) / 4

Equivalent annual cost ≈ $24,673

To learn more about annual cost here:

https://brainly.com/question/31060707

#SPJ4

The dimensions of a rectangle with the largest area that can be drawn inside a circle with a radius of 5 are L = 5.77 and W = 8.16.

The diameter of the circle is twice the radius, so it is 2 × 5 = 10.

Let's assume that the length of the rectangle is L and the width is W.

Since the diagonal of the rectangle is equal to 10, we can use the Pythagorean theorem to express the relationship between the length, width, and diagonal

L² + W² = 10²

L² + W² = 100

To find the dimensions that maximize the area of the rectangle, we need to maximize the product L × W. One way to do this is to find the maximum value for L² × W².

W² = 100 - L²

Substituting this into the area formula, A = L × W, we have

A = L × (100 - L²)

To find the maximum area, we can take the derivative of A concerning L, set it equal to zero, and solve for L

dA/dL = 100 - 3L² = 0

3L² = 100

L² = 100/3

L = √(100/3)

Substituting this value of L back into the equation for W^2, we have

W² = 100 - (100/3)

W² = 200/3

W = √(200/3)

Therefore, the dimensions of the rectangle with the largest area that can be inscribed inside a circle with a radius of 5 are approximately L = 5.77 and W = 8.16.

To know more about rectangle click here :

https://brainly.com/question/32036772

#SPJ4

16√93/93 is the equivalent value of tan A in its simplest form

The given diagram is a right angles triangle.

We need to determine the measure of tan A from the diagram. Using the trigonometry identity:

tan A = opposite/adjacent

adjacent = √93

opposite = 14

Substitute to have:

tan A = 16/√93

tan A = 16√93/93

Hence the measure of tan A as a fraction in its simplest form is 16√93/93

Learn more on trigonometry identity here: https://brainly.com/question/24496175

#SPJ1

The DC value of the obtained sequence x[n] is simply the first element, x[0] = 4.

To compute the DFT of the time sequence x[k] = {1, 1, 1, 1}, we use the following formula:

X[n] = ∑[k=0 to N-1] x[k] * exp(-j * 2π * k * n / N)

where N is the length of the sequence, x[k] is the value of the sequence at index k, X[n] is the value of the DFT at index n, and j is the imaginary unit.

For this sequence, N = 4, so we have:

X[0] = 1 * exp(-j * 2π * 0 * 0 / 4) + 1 * exp(-j * 2π * 1 * 0 / 4) + 1 * exp(-j * 2π * 2 * 0 / 4) + 1 * exp(-j * 2π * 3 * 0 / 4)

= 4

X[1] = 1 * exp(-j * 2π * 0 * 1 / 4) + 1 * exp(-j * 2π * 1 * 1 / 4) + 1 * exp(-j * 2π * 2 * 1 / 4) + 1 * exp(-j * 2π * 3 * 1 / 4)

= 0

X[2] = 1 * exp(-j * 2π * 0 * 2 / 4) + 1 * exp(-j * 2π * 1 * 2 / 4) + 1 * exp(-j * 2π * 2 * 2 / 4) + 1 * exp(-j * 2π * 3 * 2 / 4)

= 0

X[3] = 1 * exp(-j * 2π * 0 * 3 / 4) + 1 * exp(-j * 2π * 1 * 3 / 4) + 1 * exp(-j * 2π * 2 * 3 / 4) + 1 * exp(-j * 2π * 3 * 3 / 4)

= 0

Therefore, the DFT of the sequence x[k] is X[n] = {4, 0, 0, 0}.

To verify this result using MATLAB, we can use the built-in function fft:x = [1 1 1 1];

X = fft(x)This gives us X = [4 0 0 0], which matches our computed result.

The DC value of the obtained sequence x[n] is simply the first element, x[0] = 4.

Learn more about DC value here

https://brainly.com/question/24256473

#SPJ11

The value of the denominator in the calculation of the multiple standard error of the estimate would be 114.

In multiple regression analysis, the denominator in the calculation of the multiple standard error of the estimate is determined by the sample size and the number of independent variables (also known as predictors).

The formula to calculate the multiple standard error of the estimate (also known as the standard error of the regression or residual standard error) is:

Standard Error of the Estimate = sqrt(Sum of squared residuals / (n - k - 1))

Where:

Sum of squared residuals is the sum of the squared differences between the observed values and the predicted values from the regression model.

n is the sample size.

k is the number of independent variables (predictors).

In this case, if there are ten independent variables and a sample size of 125, the value of the denominator in the calculation of the multiple standard error of the estimate will be:

Denominator = n - k - 1

= 125 - 10 - 1

= 114

Therefore, the value of the denominator in the calculation of the multiple standard error of the estimate would be 114.

Learn more about denominator here:

https://brainly.com/question/30352420

#SPJ11

Answer:

Step-by-step explanation:

the first time you add 10, the second time you add 20, the third time you add 40, and you keep doubling up to the eighth time

Without further information about the "kingdom" or the structure of its paths, it is not possible to determine the number of paths of length 2 in terms of n.

Can you please provide more information or context about the problem, such as a definition of the "kingdom" or a description of the possible paths?

The function t(x, y) = (x, 2xy, y) is not a linear transformation from R2 to R3.

To determine if t(x, y) = (x, 2xy, y) is a linear transformation, we need to check if it satisfies the two properties of linearity: preservation of vector addition and scalar multiplication.

For preservation of vector addition, we need t(u + v) = t(u) + t(v) to hold for all vectors u and v in R2.

However, if we consider two arbitrary vectors u = (x1, y1) and v = (x2, y2),

we have t(u + v) = t(x1 + x2, y1 + y2) = (x1 + x2, 2(x1 + x2)(y1 + y2), y1 + y2),

while t(u) + t(v) = (x1, 2x1y1, y1) + (x2, 2x2y2, y2) = (x1 + x2, 2x1y1 + 2x2y2,

y1 + y2). Since 2(x1 + x2)(y1 + y2) is not equal to 2x1y1 + 2x2y2 in general, preservation of vector addition does not hold.

Similarly, for scalar multiplication, we need t(cu) = c * t(u) to hold for all vectors u in R2 and scalar c.

However, if we consider an arbitrary scalar c and vector u = (x, y),

we have t(cu) = t(cx, cy) = (cx, 2(cx)(cy), cy),

while c * t(u) = c(x, 2xy, y) = (cx, 2cxy, cy).

Since 2(cx)(cy) is not equal to 2cxy in general, preservation of scalar multiplication does not hold.

Therefore, t(x, y) = (x, 2xy, y) does not satisfy the properties of linearity and is not a linear transformation from R2 to R3.

Learn more about linear transformation here: brainly.com/question/13595405

#SPJ11

The equation for the residual plot for the best fit line for the given data is y = 0.4940x + 34.4323 (rounded to 4 decimal places).

To fit a straight line to the given data points (x, y), we can use a method called linear regression. Linear regression finds the best-fitting line that minimizes the vertical distance between the line and the data points.

Let's calculate the slope and y-intercept of the line using the given data

Step 1: Calculate the means of x and y.

mean(x) = (71 + 68 + 73 + 69 + 67 + 65 + 66 + 67) / 8 = 68.25

mean(y) = (69 + 72 + 70 + 68 + 67 + 68 + 64) / 7 = 68.4286 (rounded to 4 decimal places)

Step 2: Calculate the differences from the means.

differences(x) = [71 - 68.25, 68 - 68.25, 73 - 68.25, 69 - 68.25, 67 - 68.25, 65 - 68.25, 66 - 68.25, 67 - 68.25]

differences(y) = [69 - 68.4286, 72 - 68.4286, 70 - 68.4286, 68 - 68.4286, 67 - 68.4286, 68 - 68.4286, 64 - 68.4286]

Step 3: Calculate the sum of the products of the differences.

sum_diff(xy) = sum(differences(x) [i] × differences(y)[i] for i in range(len(differences(x))))

Step 4: Calculate the sum of the squared differences of x.

sum_diff(x)_squared = sum((x - mean(x)) × 2 for x in [71, 68, 73, 69, 67, 65, 66, 67])

Step 5: Calculate the slope.

slope = sum_diff(xy) / sum_diff(x)_squared

Step 6: Calculate the y-intercept.

y = mean(y) - (slope × mean(x))

Now we can substitute the values we calculated into the equation y = mx + b, where m is the slope and b is the y-intercept.

The fitted line for the given data is

y = 0.4940x + 34.4323 (rounded to 4 decimal places)

To know more about residual plot here

https://brainly.com/question/16821224

#SPJ4

-- The given question is incomplete, the complete question is

"Fit a straight line for the following data x=71,68,73,69,67,65,66,67 and y=69,72,70,68,67,68,64" --

The author also used these words to add an element of joy and happiness to the book.

In the book The Giver, the author Lois Lowry uses italics for certain words like snow, hill, runners, and sunshine when Jonas receives memories. There are various reasons why the author might have done so.

Let's take a look at a few reasons below: Reasons why the author uses italics for the words:

When Jonas receives memories, he feels that he is able to experience sensations, emotions, and things that he has never encountered before. The words like snow, hill, runners, and sunshine were italicized in order to create an impact on the reader and to emphasize feelings of Jonas while receiving those memories.

These words might have been italicized to show the importance and difference between Jonas's community and the world that existed before him, which was full of color, weather, and emotions. The usage of italicized words helped in distinguishing and highlighting the contrast between Jonas's world and the world that existed earlier. Apart from this, these words might have been italicized to add an element of joy and happiness to the book.

The words like snow, hill, runners, and sunshine indicate moments of joy, delight, happiness, and freedom. By italicizing these words, the author tried to create an impact on the reader that shows how these memories could change Jonas's life by bringing him the feeling of happiness and joy. In conclusion, the author Lois Lowry used italics for certain words like snow, hill, runners, and sunshine when Jonas receives memories to emphasize the feelings of Jonas and to show the difference between Jonas's community and the world that existed before him.

The author also used these words to add an element of joy and happiness to the book.

To learn about the Jonas life here:

https://brainly.com/question/29403434

#SPJ11

The maximum value of the absolute value parent function on the interval -10 ≤ x ≤ 10 is 10. B.

The absolute value parent function is defined as f(x) = |x| the absolute value of x is the distance between x and zero on the number line.

On the given interval of -10 ≤ x ≤ 10 can see that the maximum value of f(x) occurs at the endpoints of the interval x = -10 or x = 10.

The absolute value of x is 10, so f(x) = |x| = 10.

Thus, the maximum value of the absolute value parent function on the interval -10 ≤ x ≤ 10 is 10.

This means that the graph of the function will have a "peak" at x = -10 and x = 10 the function takes on its maximum value.

The minimum value of the absolute value parent function on this interval is 0 occurs at x = 0.

This is because the absolute value of any non-zero number is positive so f(x) can never be negative.

The maximum value of the absolute value parent function on the interval -10 ≤ x ≤ 10 is 10.

For similar questions on parent function

https://brainly.com/question/30285034

#SPJ11

The corresponding joint probability distribution is:

X\Y 0 1

0 1/12 1/4

1 1/6 1/2

Since X and Y are independent, the joint probability distribution is simply the product of their marginal probability distributions:

f(x,y) = f(x) × f(y)

Therefore, we have:

f(0,0) = f(0) ×f(0) = (1/3) × (1/4) = 1/12

f(0,1) = f(0) × f(1) = (1/3) × (3/4) = 1/4

f(1,0) = f(1) × f(0) = (2/3) × (1/4) = 1/6

f(1,1) = f(1) ×f(1) = (2/3) × (3/4) = 1/2

Therefore, the corresponding joint probability distribution is:

X\Y 0 1

0 1/12 1/4

1 1/6 1/2

for such more question on probability distribution

https://brainly.com/question/14933246

#SPJ11

The required probability of rolling a sum of 5 with two dice is 1/9.

Given that two dice are rolled and find the probability of a sum of 5.

To find the probability of rolling a sum of 5  with two dice, write the sample space and then determine the number of favourable outcomes that is the outcomes where the sum is 5 and the total number of possible outcomes.

The formula to find out the probability of any event is

P(event) = (number of favourable outcomes) / total number of possible outcomes.

The sample space of the event  of rolling two dice is

S = { (1, 1), (1, 2), (1, 3), (1, 4), (1, 5), (1, 6),

       (2, 1), (2, 2), (2, 3), (2, 4), (2, 5), (2, 6),

      (3, 1), (3, 2), (3, 3), (3, 4), (3, 5), (3, 6),

       (4, 1), (4, 2), (4, 3), (4, 4), (4, 5), (4, 6),

       (5, 1), (5, 2), (5, 3), (5, 4), (5, 5), (5, 6),

       (6, 1), (6, 2), (6, 3), (6, 4), (6, 5), (6, 6)}

The total possible outcomes is 36.

The favourable outcomes that is the outcomes where the sum is 5 is

(1, 4), (2, 3), (3, 2), (4, 1).

The number of favourable outcomes are 4.

By using the data and formula, the probability of rolling a sum of  5 is,

P(rolling a sum of  5) = (number of favourable outcomes) / total number of possible outcomes.

P(rolling a sum of  5) = 4/ 36

On dividing both numerator and denominator by 4 gives,

P(rolling a sum of  5) = 1/9.

Hence, the required probability of rolling a sum of 5 with two dice is 1/9.

Learn more about probability  click here:

https://brainly.com/question/30034780

#SPJ1

The yield of the 20-year 7% annual interest bond selling for $1,084 is approximately 3.12%(d).

To calculate the yield of a bond, we can use the formula:

Yield = (Annual Interest / Bond Price) × 100

We are given the information with Annual Interest = 7% of the face value = 0.07 × $1,000 = $70

Bond Price = $1,084

Yield = (70 / 1084) × 100 ≈ 3.12%

Therefore, the yield of the bond is approximately 3.12%. So the correct option is d which means that the yield of the bond is approximately 3.12%.

For more questions like Bond click the link below:

https://brainly.com/question/28489869

#SPJ11

The missing word or segment from the box that would correctly complete the sentence depends on the specific transformation applied to trapezoid ABCD.

In order to provide the missing word or segment, we need more information about the transformation applied to trapezoid ABCD to obtain trapezoid EFGH. Transformations can include translation, rotation, reflection, or dilation.

If the transformation is a translation, we can complete the sentence by saying "Trapezoid EFGH is the result of a translation of trapezoid ABCD."

If the transformation is a rotation, we can complete the sentence by saying "Trapezoid EFGH is the result of a rotation of trapezoid ABCD."

If the transformation is a reflection, we can complete the sentence by saying "Trapezoid EFGH is the result of a reflection of trapezoid ABCD."

If the transformation is a dilation, we can complete the sentence by saying "Trapezoid EFGH is the result of a dilation of trapezoid ABCD."

Without further information about the specific transformation, it is not possible to provide the exact missing word or segment to complete the sentence.

Learn more about Trapezoid here:

https://brainly.com/question/31380175

#SPJ11

The value of x that makes the equation cos(x°) = 0.6691 true is approximately 41.16°.

To find the value of x that makes the equation cos(x°) = 0.6691 true, we can use the fact that the sine and cosine functions are complementary for acute angles.

Since sin(42°) = 0.6691, we know that the sine of the angle is 0.6691.

Now, we can use the fact that sin²(x°) + cos²(x°) = 1 for any angle x. Substituting the given value of sin(42°) into this equation, we get:

0.6691² + cos²(x°) = 1

Simplifying this equation, we have:

0.4476 + cos²(x°) = 1

Subtracting 0.4476 from both sides, we get:

cos²(x°) = 0.5524

Taking the square root of both sides, we find:

cos(x°) = ±0.7432

Since x is an acute angle, the cosine function will be positive.

The value of x that makes the equation cos(x°) = 0.6691 true is approximately 41.16°.

To know more about value,

https://brainly.com/question/23207137

#SPJ11

The other base of the trapezoid is 8 units long.

Let's denote the other base of the trapezoid as 'x'. The formula for calculating the area of a trapezoid is given by A = (1/2)(b1 + b2)h, where b1 and b2 represent the lengths of the bases and 'h' represents the height. We are given that the length of one base (b1) is 10 units, the height (h) is 4 units, and the area (A) is 36 square units.

Using the formula for the area, we can plug in the given values: 36 = (1/2)(10 + x)(4). Simplifying the equation, we get 36 = (5 + 0.5x)(4). Further simplification yields 36 = 20 + 2x. By subtracting 20 from both sides of the equation, we obtain 16 = 2x. Dividing both sides by 2 gives us x = 8.

Therefore, the other base of the trapezoid is 8 units long.

Learn more about trapezoid here:

https://brainly.com/question/31380175

#SPJ11

The mean for the sample is calculated by adding up all the scores and dividing by the number of scores in the sample. In this case, the sum of the scores is 28 (3+1+1+23) and there are 4 scores, so the mean is 7 (28/4).

The degrees of freedom for this sample is 3, which is the number of scores minus 1 (4-1).

The variance is calculated by taking the difference between each score and the mean, squaring those differences, adding up all the squared differences, and dividing by the degrees of freedom. In this case, the differences from the mean are -4, -6, -6, and 16. Squaring these differences gives 16, 36, 36, and 256. Adding up these squared differences gives 344. Dividing by the degrees of freedom (3) gives a variance of 114.67.

The standard deviation is the square root of the variance. In this case, the standard deviation is approximately 10.71.

the mean score for the northern U.S. women on the attribute Sensitive is 7, with a variance of 114.67 and a standard deviation of approximately 10.71. These statistics provide information about the distribution of scores for this sample.

To know more about square root  visit:

https://brainly.com/question/29286039

#SPJ11

Therefore, the mean is 7, the degrees of freedom is 3, the variance is 187.33, and the standard deviation is 13.68 for this sample of northern U.S. women on the attribute Sensitive.

To calculate the mean, we add up all the scores and divide by the number of scores:

Mean = (3 + 1 + 1 + 23) / 4 = 7

To calculate the degrees of freedom (df), we subtract 1 from the number of scores:

df = 4 - 1 = 3

To calculate the variance, we first find the difference between each score and the mean, square each difference, and add up all the squared differences. We then divide the sum of squared differences by the degrees of freedom:

Variance = ((3-7)² + (1-7)² + (1-7)² + (23-7)²) / 3

= 187.33

To calculate the standard deviation, we take the square root of the variance:

Standard deviation = √(187.33)

= 13.68

To know more about standard deviation,

https://brainly.com/question/23907081

#SPJ11