Which of these changes is an example of a physical change?

A. zinc reacts with oxygen to form zinc oxide

B. vinegar turns milk into cheese

C. a banana rots

D. a piece of fruit is bitten in half​

Answers

Answer 1

Answer:

A. Zinc react with oxygen to form zinc oxide


Related Questions

Without differentiation of cells, complex organisms would not-

Answers

The differentiation of cells is responsible for the development of specialized tissue in living organisms.

What is meant by the differentiation of cells?

The process by which dividing cells are able to change their functional or phenotypical type is called cell differentiation. All cells have presumably been derived from the stem cells and have obtained their functions as they mature.

Cellular composition is often described as a hierarchical scheme where the stem cells are at the top of the hierarchy. According to mathematical models of cell differentiation, the proliferation, death, and differentiation of an appropriately distinguished cell population are considered.

For example, the cells that are present in a stem cell population are able to differentiate into multiple types of cells. They are able to maintain their number by self-renewal.

A progenitor cell population is derived from the stem cells and it differentiates into a restricted cell lineage. Here, a mature cell population is derived from the progenitor cells and they perform some functions and then die a natural death.

Learn more about cell differentiation here: brainly.com/question/16355203

#SPJ1

If the radius of atom X is greater than the radius of atom Y, then it is also likely that: a. X has a larger electron affinity than Y does. b. X has a larger effective nuclear charge than Y does. c. X has a greater metallic character than Y does. d. X has a larger first ionization energy than Y does. e. X is a poorer conductor of electricity than Y when in the solid state.

Answers

The radius of atom X is greater than the radius of atom Y, then it is also likely that X has a greater metallic character than Y does option - c is correct answer.

What causes the metallic character to get smaller from left to right?

As we move from left to right, the amount of metallic character decreases while the amount of nonmetallic character increases. This is brought on by an increase in the enthalpies of ionisation and electron gain brought on by an increase in the effective nuclear charge.

Because radius decreases over the course of a period, if X has a larger radius than Y, X is on the left side of Y in the periodic table.

The assertion A is untrue because electron affinities increase from left to right.

Statement B is false because the effective nuclear charge increases from left to right.

The statement C is true because the metallic character gets thinner from left to right.

D is untrue because ionization energy increases from left to right.

Since X is more metallic than Y, the assertion E is untrue.

The correct response is therefore statement C.

To know more about metallic character visit:

https://brainly.com/question/16940676

#SPJ4

A pan containing 0.5 kg of cold water at 4°C is heated to 75°C how much heat was required to heat the water

Answers

Specific heat capacity of a substance is the amount of heat required to raise the temperature by one degree Celsius of one gram of a substance. Therefore, 148.5J is the amount of heat that was  required to heat the water.

What is Enthalpy?

Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances. Internal energy is the sum of all kinds of energy that the particles of a matter can possess, for example translational energy. Rotational energy.

Mathematically,

Enthalpy=mass of unknown water× specific heat capacity of water× Change in temperature

mass of water= 0.5 kg

specific heat capacity of water=4.184J/Kg°C

Change in temperature=final temperature - initial temperature

=75°C -4°C

= 71°C

enthalpy=?

Substituting all the given values in the above equation, we get

enthalpy= 0.5× 4.184× 71

              =148.5J

Therefore, 148.5J is the amount of heat that was  required to heat the water.

To know more about enthalpy, here:

https://brainly.com/question/24170335

#SPJ1

What volume of 0.171 M NaOH, in milliliters, contains 29.0 g of NaOH?

Answers

Answer: 4240.08

Explanation: 29 grams of NaOH is equivalent to .725 moles of NaOH since the molar mass of NaOH is 39.997. We do the calculation 29/39.997 to find the number of moles.

The unit M or molarity represents moles per liter. .171 M NaOH means there are .171 moles of NaOH in one liter of the solution. To find the volume needed, we can divided the number of moles we have which is .725 by .171 to find liters. This gives us 4.240 L or 4240.08 ml.

If you are confused by the calculation, you can look at how the units change: M=Mol/L .725 is in moles. We do mol/(mol/L) which is the same as mol*(L/mol) so the mol cancels and we are left with a unit in liters which we can easily convert to milliliters.

Predict the effect of the changes given below on the rate of the reaction. CH_3 Cl + NaOCH_3 rightarrow^ CH_3OH CH_3OCH_3 + NaCl Change the subtrate from CH3_Cl to CH_3I: Change the nucleophile from NaOCH_3 to NaSCH_3: Change the substrate from CH3_Cl to (CH_3)_2CHCl: Change the solvent from CH_3OH to DMSO.

Answers

Ethers are formed via the SN2 method. Since I- is a superior leaving froup than Cl-, the reaction rate will rise when switching from CH3Cl to CH3I. The rate is going to drop. Secondary halides include (CH3)2CHCl.

A response rate example is what?

The broad definition is that the term "rate of a reaction" refers to the pace at which a reaction occurs. For instance, because iron rusts quickly, wood combustion has a rapid response rate.

What other sorts of response rates exist?

The following five broad characteristics can have an impact on a reaction's pace. the mixture of the reactants. The rate increases as concentration increases. Temperature, Reactants' current physical state. The existence (and intensity/physical

To know more about rate of reaction visit:

https://brainly.com/question/13693578

#SPJ4

Which of the compounds below is capable of hydrogen bonding between its molecules?
• a. CH3CH2OCH3
• b. CH3CH2CH2F
• c. CH3NHCH2CH3
• d. CH3CH2CH2CH3
• e. (CH3)3N

Answers

C) The compounds underneath is competent of hydrogen holding between its particles CH₃NHCH₂CH₃.

What is natural compound with example?

Organic compounds are a substance that contains covalently- fortified carbon and hydrogen and regularly with other components. Natural compounds illustrations are benzoic Corrosive, fragrant compounds, benzoic aldehyde, propanoic corrosive, butanoic corrosive, malonic corrosive, amines, heterocyclic compounds, VOC, benzoic corrosive, and diethyl malonate.

What is natural and inorganic?

Organic compounds are those gotten specifically or by implication from plants and creatures. The compounds gotten from minerals are known as inorganic compounds.

To learn more about Organic compounds here:

https://brainly.com/question/5994723

#SPJ4

In the reduction of 10.04g of the iron (III) oxide with hdrogen (with the formation of H20(g), ΔH^0 of H20(g) = -241.84 kJ/mol), 6.09 kJ of heat is absorbed. Find ΔH(f) (in kJ/mol) Fe2O3.
a) -822
b) 907
c) 94
d) 536
e) 1550

Answers

After solving the equation the correct answer is a) -822 kJ/mol.

What is equation?

An equation is a mathematical statement that expresses two expressions as being equal. It contains an equal sign, and typically involves variables, numbers, and/or operations such as addition, subtraction, multiplication, and division. Equations can be used to solve for unknown values and to describe relationships between things. They are a powerful tool in mathematics, science, engineering, economics, and other fields.

The given equation is Fe2O3 + 3H2 → 2Fe + 3H2O. Since the enthalpy of formation of water, ΔHf^0 (H2O) is known, the enthalpy of formation of iron (III) oxide can be calculated as follows:
ΔHf^0 (Fe2O3) = -6.09 kJ - 3(-241.84 kJ/mol)
ΔHf^0 (Fe2O3) = -822 kJ/mol
Therefore, the correct answer is a) -822 kJ/mol.

To learn more about equation
https://brainly.com/question/28818351
#SPJ1

Succinic acid occurs in fungi and lichens. Its empirical formula is C2H3O2 and its molar mass is 118.1 g/mol. What is its molecular formula? (Type your answer using the format CH4 for CH4.)

Answers

Succinic acid occurs in fungi and lichens. Its empirical formula is C2H3O2 and molar mass is 118.1 g/mol. Its molecular formula is C4H6O4/ (CH2)2(CO2H)2.

What is succinic acid?

Succinic acid is a dicarboxylic acid with the chemical formula as (CH2)2(CO2H)2. Succinic acid is naturally occurring four-carbon dicarboxylic acid with the molecular formula of C4H6O4 which is produced by liquefied petroleum gas.

The benefit of using succinic acid over traditional salicylic acid or benzoyl peroxide is that succinic acid is found to be gentle and non-drying, making it a good option for sensitive / irritated skin. Succinic acid helps to control and balance excess sebum production to reduce shine and excess oil which is great for those with oily / acne-prone skin.

To know more about succinic acid, refer

https://brainly.com/question/11629463

#SPJ1

Draw the structure of the following three isomeric acid chlorides with chemical formula C6H9ClO.
Acid chloride #1: trans-3-methylcyclobutanecarbonyl chloride
Acid chloride #2: (Z)-4-hexenoyl chloride
Acid chloride #3: cyclopentanecarbonyl chloride

Answers

The structures of the following three isomeric acid chlorides with chemical formula C₆H₉ClO are attached below.

What is an isomer?

Isomers are substances that contain precisely the same number of atoms, i.e., they have the exact same empirical formula, but they differ from one another by the arrangement of the atoms. Chain isomers, positional isomers, and functional group isomers are the three types of structural isomers.

Isomer types can be divided into two categories. Constitutional isomers are molecules with different connectivity, which are comparable to simple bracelets with a different arrangement of the red and green beads. Stereoisomers make up the second kind. The connectivity in stereoisomers is the same, but the components are arranged differently in space.

To know more about isomers visit:

https://brainly.com/question/28304980

#SPJ4

Which of the following is an interaction in which one organism will be consumed? Parasitism, Competition, Predation, Commensalism

Answers

Answer:

predation

Explanation:

The types of interaction in which one organism will be consumed are predation and competition.

PREDATION: When one animal hunts down another animal for food, it is called predation. The animal that is hunting is called the predator and the one being hunted is called the prey. Certain patterns of predation give us a particular food chain. For example, an insect is eaten by a frog, a frog is eaten by a snake, and a snake is then eaten by a vulture.

COMPETITION: In this type of interaction, a group of animals or individual animals compete for food or other resources. Depending on the resource being competed for, it is of various types.

Learn more about animals at:

https://brainly.com/question/1462278

What Two Beta-Keto Esters Are Formed In The Dieckmann Reaction Of The Following Diester?

Answers

In the Dieckmann reaction, the diester undergoes a cyclization reaction to form a beta-keto ester. Two beta-keto esters are formed, one from the carboxyl group at the end of the chain, and one from the carboxyl group at the middle of the chain.

How does cyclization begin?

Cyclization is started by the production of a putative cation, typically from a sp3-hybridized carbon, either by electrophilic addition to a double bond or by ionization.

The most frequent cyclization processes take place when an electrophile and a nucleophile interact. Consequently, the following are the most common reaction types: the nucleophilic change in a carbon atom that is saturated. addition by nucleophiles to an unsaturated carbon. Atomic addition-removal nucleophilic.

To know more about Cyclization visit: https://brainly.com/question/29422955

#SPJ4

when sodium and chlorine ions form an ionic bond, the heat that is released is called the

Answers

The heat that is produced when sodium and chlorine ions establish an ionic bond is known as the heat of formation.

What is ionic bond?

Ionic bonding, a sort of chemical bonding that involves the electrostatic attraction between two atoms or ions with sharply differing charges, is the main interaction that takes place in ionic compounds.

The electrical attraction between two ions with opposing charges in a chemical molecule creates an ionic bond, also known as an electrovalent bond.

One atom's valence (outermost) electrons are permanently transferred to another atom to create this type of bond. Ionic bonds, which occur when two negatively charged ions join forces with positively charged ones, are formed when one atom transfers electrons to the other. Ionic bonds can be seen in the chemical compound sodium chloride.

To learn more about ionic bond, refer to:

brainly.com/question/13526463

#SPJ4

Consult the periodic table and rank these atoms from most to least; by their mass Rank from most to least To rank items as equivalent; overlap them

Answers

After reviewing the periodic chart, we find Dubnium, Tantalum, Niobium, and Magnesium in accordance with the supplied statement.

What exactly is an atom?

Atomic composition. A tiny nucleus and electrons in orbit make up an atom. Protons are found in the nucleus with a positive charge that is equivalent to the atom negative charge. Neutrons, which have essentially same mass and yet no charge, may also be present in the nucleus.

What does atom mean?

But when it refers to the name atom, we must travel back to 400 B.C. ancient Greece. This Greek word atomos, it meaning "uncuttable," was proposed by Democritus, a renowned philosopher. Consequently, he claimed, all matter may be broken down into unique, small particles known as atomos.

To know more about Atom visit :

https://brainly.com/question/13973654

#SPJ4

The Complete Question :

Consult the periodic table and rank these atoms, from most to least, by their mass.

Tantalum

Niobium

Dubnium

Magnesium

what is the enthalpy of the reaction in kj/mol of xy2?:

Answers

Enthalpy, which is equal to the sum of a system's internal energy plus the product of volume and pressure, measures the overall amount of heat contained in a system.

What is enthalpy ?

A thermodynamic system's energy is measured in terms of enthalpy. Enthalpy, which is equal to the sum of a system's internal energy plus the product of volume and pressure, measures how much heat is present in a system overall.

The change in enthalpy of a chemical reaction that takes place under constant pressure is known as the Heat of Reaction, also known as the Enthalpy of Reaction. It is a thermodynamic unit of measurement that may be used to figure out how much energy per mole is created or released during a reaction.

"H" stands for "Hproducts" and "Hreactants."

A little under 4 kJ of energy are thus released during the production of salt.

To learn more about enthalpy refer to:

https://brainly.com/question/14047927

#SPJ4

5. What type of intermolecular force gives water many of its characteristics?
hydrogen bonding
Oion-dipole forces
O dipole-dipole forces
dispersion forces

Answers

Answer:

Hydrogen bonding

Explanation:

Hydrogen bonding is the strongest intermolecular force in water, giving water many of its characteristics and acting to pull water molecules closer to each other.

I hope this helps!

a lab group completely reacted to a 0.5 f piece of aluminum in excess of CuCl2. instead of rinsing off the copper, the group weighed it and obtained 1.50 g Cu. Calculate the percent yield of copper in their reaction. write the balanced chemical equation.​

Answers

1. Percent yield = (Actual yield/Theoretical yield) x 100

Actual yield = 1.50 g Cu

Theoretical yield = (0.5 f Al) x (1 mol Al/27.0 g Al) x (1 mol Cu/1 mol Al) x (63.5 g Cu/1 mol Cu) = 1.35 g Cu

Percent yield = (1.50 g Cu/1.35 g Cu) x 100 = 111.1%

2. Balanced chemical equation: 2 Al + 3 CuCl2 → 2 AlCl3 + 3 Cu

Answer: 2Al + 3CuCl2 → 2AlCl3 + 3Cu, Percent yield is 84.9%

Explanation: Find moles of aluminum using molar mass then x by coefficient ratio of cu/al. Then divide 1.5 by that value and x 100.

Landslides are an example of ________.
A
weathering

B
erosion

C
deposition

D
chemical change

Answers

Landslides are an example of erosion and it is denoted as option B.

What is Erosion?

This is referred to as the geological process in which earthen materials are worn away and transported by natural forces such as wind, water etc.

Landslides on the other hand is also associated with mass wasting and it is referred to as the movement of a mass of rock, debris, or earth down a slope and it is as a result of factors or forces such as water etc which is therefore the reason why erosion was chosen as the most appropriate choice.

Read more about Landslides here https://brainly.com/question/22692497

#SPJ1

Cu(s) + 2 AgNO3(aq) —> Cu(NO3)2(aq) + 2 Ag(s) According to the balanced chemical equation, how many g of silver will be produced from combining 100 g of copper with 200 g of silver nitrate?

Answers

Cu(s) + 2 AgNO3(aq) —> Cu(NO3)2(aq) + 2 Ag(s) According to the balanced chemical equation, 7.09 x 10²³g of silver will be produced from combining 100 g of copper with 200 g of silver nitrate.

What is balance chemical equation ?

The balance chemical equation is defined as the total mass of reactant is exactly equal to the total mass of product.

Molar mass of Cu  is 63.57 g/mol.

Mole of Cu in 100 g

= (100 g/63.57 g/mol)

= 1.573 mol

Molar mass of AgNO3 is 169.91 g/mol.

Mole of AgNO3 in 200 g

= (200 g/169.91 g/mol)

= 1.177 mol.

From the balanced, the mole ratio of Cu to AgNO3 is 1:2.

So, for 1.573 mol of Cu, mole of AgNO3 required for reaction

= (2/1) x 1.573

= 3.146 mol.

Therefore, Cu is the excess reactant.

From the balanced equation again, the mole ratio of AgNO3 to Ag is 2:2 or simply 1:1.

Then, for 1.177 mol of AgNO3, mole of Ag produced is (1/1) x 1.177 = 1.177 mol.

By Avogadro’s Number, 1 mole of any substance contains 6.022 x 10²³ atoms.

Hence, for 1.177 mole of Ag, the number of Ag atoms produced

= (1.177 mole x 6.022 x 10²³ atoms/mole)

= 7.09 x 10²³.

Thus, According to the balanced chemical equation, 7.09 x 10²³g of silver will be produced from combining 100 g of copper with 200 g of silver nitrate.

To learn more about the balance chemical equation, follow the link;

https://brainly.com/question/28294176

#SPJ1

The pressure of hydrogen sulfide gas in a container is 35,650Pa. What is this pressure in torr (1 atm = 101,325 Pa = 760torr)?
A. 46.91 torr
B. 267.4 torr
C. 351.8 torr
D. 3612torr
E. 27,090 torr

Answers

A container of hydrogen sulphide gas has a pressure of 35,650Pa. This pressure in torr is 267.4 torr.

Given the  pressure of hydrogen sulfide gas is (P) = 35,650Pa

We know that 1 atm = 101,325 Pa = 760torr

Then let 35,650Pa is equal to y torr.

y x 101,325 = 760 x  35,650

y = 267.4torr

Pressure is defined as the force perpendicular to an object's surface applied per unit area over which that force is dispersed. The force of one newton applied perpendicularly to a surface area of one square metre constitutes the fundamental unit of pressure, the pascal.

To learn more about hydrogen sulfide click here https://brainly.com/question/11837837

#SPJ4

When solid NaCl is stirred into water; which of the following is NOT true? O The NaCl will fail to dissociate. O The solution will taste salty.
O The solution will conduct electricity. O Individual sodium and chloride ions are present O none of the above

Answers

O The NaCl will fail to dissociate. is NOT true. When solid NaCl is stirred into water, it will dissociate, meaning it will separate into individual sodium and chloride ions, which will make the solution conduct electricity and taste salty.

What is Dissociation?

When a solid ionic compound dissolves, there is a process known as dissociation that separates the ions. The ability to formulate dissociation equations is crucial. Simply reverse the crisscross technique you learnt to use when writing ionic compound chemical formulas.

Dissociation is the process by which chemical molecules (or ionic compounds like salts, or complexes) disintegrate into simpler components like atoms, ions, or radicals. This process is typically reversible, as it is for CO2 and H2O at high temperatures.

Association and recombination are opposed by dissociation. Dissociation, for instance, causes metal pipes used in water treatment to corrode more quickly and cause more pitting in the anode area of concentration cells. In the presence of hydrogen sulfide and water, the dissociation of the hydrogen-sulfide molecule is also necessary for the corrosion of iron.

To know more about dissociation visit:

https://brainly.com/question/29571608

#SPJ4

This question has multiple parts. Work all the parts to get the most points. Predict the product(s). Show the mechanism.

Answers

the process of creating nitrile from amide. In this reaction, thionyl chloride and amide combine, producing nitrile as well as SO2 and HCl gas. The elimination of byproducts (such as SO2 and HCl) is crucial to the success of this reaction.

What does the term "mechanism" mean?

the mechanism or technique by which a result is generated or a goal is achieved. machinery or mechanical devices in general. the arrangement or organization of components of a machine, comparable equipment, or something similar. any mechanical device or component: a clock's mechanism

What is a mechanism or process?

a method or technique that is employed to bring about a certain outcome. NIST SP 800-160v1r1 is one of the sources. the essential procedures entailed in or accountable for an activity,

To know more about mechanism visit:

https://brainly.com/question/28111553

#SPJ4

The solubility of CaCO3 (formula weight 100.1) is 0.0095 g in 1800 mL. What is the Ksp?
2.8 x 10-9
2.8 x 10-5
5.2 x 10-9
3.8 x 10-7
5.2 x 10-5

Answers

Calcium Carbonate (formula weight 100.1) dissolves in 1800 ml at a rate of 0.0095 g, and its ksp is 2.8 x [tex]10^{-9}[/tex]

The equilibrium constant for a saturated solution of an ionic chemical at a certain temperature is known as the solubility product constant (Ksp). We need to know the compound's molar solubility in order to determine the Ksp. From the stated solubility, which is 0.0095 g in 1800 ml, it is possible to determine the molar solubility of caco3. We must convert the solubility of calcium carbonate into moles in order to compute molar solubility. 0.00094 moles are equivalent to 0.0095 g of caco3. We may now use the Ksp equation, which is Ksp = [Ca2+][CO32-]. When we replace Ksp with the molar solubility ofcalcium carbonate, we get 2.8 x  [tex]10^{-9}[/tex]as Ksp = 0.00094 x 0.00094.

To  know more about  Ksp refer to the link

brainly.com/question/27132799

#SPJ4

are the following components most accurately described as cofactors, coenzymes, or neither?
a. Ni2+
b. inorganic ion
c. ascorbic acid
d. NADP
e. CoA
f. protease

Answers

a) Ni₂⁺ is a metal ion and is a co-factor

b) Inorganic ions are co-factors

c,d,e)Ascorbic acid, NADP, and CoA are all organic molecules. So, they are co-enzymes.

f) A protease is a holoenzyme or the main enzyme. It is neither

co-factor nor co-enzyme.

What are cofactors and examples of them?

Cofactors are small, soluble organic or inorganic molecules that interact with enzymes to improve or enable their activity. Metals are typical inorganic cofactors, including but not restricted to copper, magnesium, manganese, zinc, molybdenum, and cobalt.

Coenzymes are organic molecules that function along with enzymes. Coenzymes bind with the enzymes.

Ni₂⁺ is a metal ion and is a cofactor

Inorganic ions are cofactors

Ascorbic acid, NADP, and CoA are all organic molecules. So, they are coenzymes.

A protease is a holoenzyme or the main enzyme. It is neither cofactor nor coenzyme.

To know more about cofactors visit:

https://brainly.com/question/29940952

#SPJ4

In biochemistry laboratories, solutions of sucrose (table sugar, C12H22O11) are used in high speed centrifuges to separate the parts of a biological cell. How many liters of 4.25 M sucrose contain 109 g of solute?

Answers

0.233 liters of  4.25 M sucrose contain 109 g of solute  which is used In biochemistry laboratories, in high speed centrifuges to separate the parts of a biological cell.

Moles of sucorse = [tex]\frac{mass}{molar mass}[/tex]

= [tex]\frac{245}{342.3}[/tex]

= 0.71575 mol

volume of solution = [tex]\frac{moles}{concentration}[/tex]

= [tex]\frac{0.71575}{3.07}[/tex]

= 0.233 L

In chemistry, a mole, usually spelled mol, is a common scientific unit for calculating huge concentrations of minute particles like atoms. The International System of Units uses the mole (symbol: mol) as the unit of material quantity (SI). The amount of substance is a metric for determining how many elementary entities of a specific substance there are in a given object or sample. The mole concept permeates all of chemistry. Understanding the mole is crucial for the study of chemistry because the mole is the subject of the majority of quantitative chemical calculations. an understanding of the mole's relationship to mass and entity count.

A substance's molarity (M) is the volume of solution in which it is present. The moles of a solute are referred to as molarity.

For such more questions on  Sucrose:

brainly.com/question/29186350

#SPJ4

0.233 liters of 4.25 M sucrose contain 109 g of solute which is calculated in the below.

The number of moles can be calculated by taking the ratio of mass and molar mass.

Moles of sucrose = 109 g /342.3 g/mol

= 0.71575 mol

Molarity of a substance can be expressed as the ratio of its number of moles to the volume of solution in L.

Molarity = number of moles /Volume of solution

4.25 M= 0.71575 moles/ Volume of solution

Volume of solution= 0.233 L

The mole is crucial for the study of chemistry because the mole is the subject of the majority of quantitative chemical calculations. An understanding of the mole's relationship to mass and entity count.

To learn more about molarity check the link below:

https://brainly.com/question/14469428

#SPJ4

The tautomerization of 3-pentanone gives two possible enols, one of which is shown. Part l: Predict the second enol formed in this reaction.

Answers

The tautomerization of 3-pentanone gives two possible enols, one of which is shown.  the second enol formed in this reaction is shown in the first image.

Tautomerization is a process in which a molecule can exist in two or more different forms that are constitutional isomers (also called tautomers) of each other. These forms differ by the position of a proton (H+ ion) and have different chemical properties. Tautomerization is a type of isomerization, which is a chemical reaction in which a molecule is converted into one of its isomers.An enol is a type of organic compound that contains a carbon-carbon double bond and a hydroxyl group (-OH) on the same carbon atom, known as the alpha carbon. Enols are structural isomers of the corresponding ketones and aldehydes and can exist in equilibrium with them through the process of tautomerization.

Learn more about aldehydes here:

https://brainly.com/question/29756072

#SPJ4

I have three moles of Methane (CH4) on the reactant side of the reaction. Do I have enough information to determine how many moles of products I will have following a reaction? If not, what else do I need to know?

Answers

Answer:A mole is a way of counting things, in the case of chemistry those things are molecules.

But the number of things is a chemical reaction are not necessarily preserved: some reactions create more molecules (electrolysis of water (H2O), for example, starts with two molecules of water but delivers one molecule of oxygen gas (O2) and two molecules of hydrogen gas (H2)).

So moles are not conserved if the structure of the molecules changes because of the reaction. The point of writing equations is to match conservation of matter (atoms don't disappear) to the structures of the molecules involved in the reaction. Sometimes reactions just rearrange the atoms and give the same number of moles of product, sometimes they create more molecules, and sometimes they create fewer molecules.

In an ideal gas, there is a neat relationship between the number of moles and the volume or pressure (at constant pressure the volume is proportional to the number of moles of gas; at constant volume, the pressure is proportional to the number of moles of gas). So your question asks you to compare the number of moles resulting from the reaction to the number going into the reaction. since they are the same, the pressure won't change.

Explanation:   I know it's a lot to read I'm sorry but I want you to get an A on it so there you go. Hope this helps

Which of these changes is an example of a chemical change?

A. ice cream solidifying.
B. a tree decomposing in a forest.
C. a figure made from a block of modeling clay. D. polishing a gemstone. ​

Answers

The answer is B. It's the only one in which the original mass changes to a different mass.

Electron respiration redox

Answers

Electron in biological systems, carrier molecules help temporarily transport the stored energy of electrons and ease the relay of electrons from one carrier molecule to another.

Redox reactions refer to the entire process of moving electrons from one molecule to another. Because one carrier molecule acquires electrons and becomes reduced (red-), earning the name "redox," the other carrier molecule loses electrons and becomes oxidized (-ox). Occasionally, the phrase "oxidation-reduction reaction" is used in its place. When a molecule is oxidized, it either needs electrons or has already given them up. The addition or removal of oxygen (O) or hydrogen (H) is a sign that a molecule has undergone oxidation. Reduced signifies that the molecule has acquired electrons and is prepared to surrender them. An indication is the loss or gain of oxygens (O) or hydrogens (H).Small organic molecules known as electron carriers, also referred to as electron shuttles, are utilized to transport electrons during metabolic reactions. They easily cycle between reduced and oxidized states.

To know more about respiration on

https://brainly.com/question/12081196

The complete follows as

What electron carrier is used in the redox reactions in cellular respiration?

which of the following is the most soluble in water? acetic acid pentanol butanoic acid pentanal
A. acetid acid
B. pentanol
C. butanoic acid
D. pentanal

Answers

A. acetid acid is the most soluble in water among the pentanol, butanoic acid, pentanal

Acetic acid is the most water-soluble among the given options. Acetic acid is a carboxylic acid and is highly polar, meaning that it has a high affinity for water. The presence of the carboxyl group (-COOH) gives acetic acid the ability to form hydrogen bonds with water molecules. Pentanol, butanoic acid and pentanal are less polar than acetic acid, they have lower solubility in water. Among them, pentanol has the highest solubility, but still it is less polar than acetic acid, followed by butanoic acid, and pentanal is the least water-soluble among the options.

Learn more about Acetic acid here:

https://brainly.com/question/12924347

#SPJ4

Text: Changing Land
1. What are three agents of change responsible
for changing landforms?

2. According to the text, what are 3 landforms
created by wind?

3. According to the text, what 2 landforms are
created by glaciers?

4. According to the text, what landform is formed
by deposition at the mouth of a river?

5. U-shaped valleys and canyons are both formed
by weathering and erosion. What is another
landform that is created due to weathering
and erosion?



Plissss help now

Is for cience

Answers

The three main causes of erosion, or the removal of soil, rock, and other materials, are wind, water, and ice.

What three factors lead to changes in landforms?

Compared to plate tectonics, landforms are changed much more quickly by earthquakes, weathering, and people, and these changes are frequently visible.

Sand dunes, Loess Deposits, Yardangs, Ventifact, Deflation Hollow or Blowout, and Desert Pavement are among the geological features.

Glaciers carved a collection of strange valleys with flat bottoms and steep walls. Hanging valleys, fjords, and U-shaped valleys are a few examples of the different sorts of valleys that glaciers can destroy.

Alpine glaciers have their origins in the mountains, in a number of our National Parks. When they form in tiny basins with sloping sides, they are referred to as cirque glaciers (cirques).

U-shaped valleys have been found to be produced by glacial erosion. A massive glacier's journey through the landscape leaves imposing traces. Walls of rock blocks are  torn apart by its abrasive force.

To learn more about landforms refer to:

https://brainly.com/question/20932760

#SPJ1

Other Questions
the architects choice to use primarily mud brick to build the great mosque of djenn resulted in which of the following? international hr challenge that would most directly be addressed through direct training of employees is Mother-in-law was talking about the taliban because shes fighting for girls education what effect did the taliban attack have on my lah-lahs dedication to education issues On January 1, the $6,450,000 par value bonds of Spitz Company with a carrying value of $6,450,000 are converted to 2,150,000 shares of $1 par value common stock Record the entry for the conversion of the bonds. View transaction lit Journal entry worksheet Record the retirement of bonds by stock conversion. Note: Enter debits before credits. General Journal Debit Credit Date Jan 01 Record entry Clear entry View general Journal estimates of bmr for males is ____ kcal/kg/hr and for females is ____ kcal/kg/hr. jake is a 24 year old male who weighs 215 pounds. his current bmr is __________. the base of a solid is the region bounded below by the curve y = x^2 and above by the line y =d, where d is a positive constant: Every cross-section of the solid perpendicular to the y axis square. If the voluie of the solid is 72, what is the value of d? a.6b.10c.8d.4 Find the area of the shaded region. Round to the nearest tenth if necessary.A. 332.1 cmB. 210 cmC. 201.3 cmD. 205.8 cm Is correct use went if you talk an action the make two person? What critical value t* from Table C would you use for a confidence interval for the mean of the population in each of the following situations? (If you have access to software, you can use software to determine the critical values.) Step 1: A 95% confidence interval based on n = 12 observations. O 1.372 O 1.812 0 2.521 O 2.201 Step 2: An 99% confidence interval from an SRS of 2 observations. O 36.353 O 72.358 O 63.657 42.210 Step 3: A 90% confidence interval from a sample of size 1001. O 3.499 O 1.646 O 3.355 O 1.232 A researcher has 15 pure bred wild mince which were brown and all were females. They were all mated with a male called bob. All the offspring were brown. These were then crossed among themselves with the following results: 293 brown and 115 white. Use the punnett square to determine the colour of the bob What is the strongest base, among the following? ClO^- ClO_2^- ClO_3^- ClO_4^- What is the weakest acid, among the following? HOI HOBr HOCl all are equivalent if an imbalance occurs between incoming and outgoing energy at the earth's surface, the u.s. supreme court's standards for judging something as obscene include which of the following? The statements are about firms, profits, and economic costs. Determine if each statement is true or false and place the correct term next to each statement.1. Economists assume that only corporations seek to maximize their profits. 2. Normal profits are profits that are in excess of implicit and explicit costs. 3. "Normal profit" and "zero economic profit" refer to the same concept. 4. A partnership has most of the legal rights of individuals and can issue shares of stock to raise financial capital. Answer Bank false true 5. Am entrepreneur who works for free during the early start-up phases of a firm should not count forgone salary as an economic, or implicit, cost. 6. Firms located in an area with access to lots of low-cost labor tend to use low-technology, labor-intensive production processes. 7. The percentage of Europeans who classify themselves as entrepreneurs is approximately half the percentage in the United States. 100 Points! Geometry question. Identify the similar triangles. Then find each measure. Photo attached. Please show as much work as possible. Thank you! T/F : a motion performed voluntarily by an athlete, through muscular contraction write 20.05 10-1 ml in decimal form. almost all grandparents provide some caregiving and gifts _____. The industry demand is Q = 1000 40P. The monopolist cost function is C = 0.2Q2 + 10Q + 150. At the equilibrium, what is the consumers surplus?The industry demand is Q = 100 2P. The monopolist cost function is C = 0.01Q2 + Q + 100. What is the monopolists equilibrium price?The industry demand is Q = 200 5P. The monopolist cost function is C = 0.8Q2 + 30Q + 200. What is the monopolists equilibrium quantity of production?The industry demand is Q = 200 5P. The monopolist cost function is C = 0.8Q2 + 30Q + 200. What is the monopolists equilibrium price?The industry demand is Q = 100 2P. The monopolist cost function is C = 0.01Q2 + Q + 100. What is the monopolists equilibrium quantity of production?The industry demand is Q = 100 2P. The monopolist cost function is C = 0.01Q2 + Q + 100. At the equilibrium, what is the firms profit?The industry demand is Q = 1200 10P. The monopolist cost function is C = 0.5Q2 + 5Q + 1200. What is the monopolists equilibrium price?The industry demand is Q = 200 5P. The monopolist cost function is C = 0.8Q2 + 30Q + 200. At the equilibrium, what is the consumers surplus? Which person maintains quality control of all production elements after opening? A) Director B) Producer C) Stage manager. D) Dramaturg.