Answer:
B) Transportation and photosynthesis
C) Cellular respiration and photosynthesis
Write the equation for the acid dissociation, write the Ka expression, solve for Ht concentration, then do an ICE chart. Put the values into the Ka expression (the one you solved for Ht and find Ht, convert to pH and input that to 2 decimal place. Or use the Henderson-Hasselbalch equation:
pH = pka, + log ( Base/Acid)
Calculate the pH of a buffer solution consisting of 0.39 M HA (Ka = 8.8 x 10^-6) and 0.2 M NaA.
Answer:
The pH of the buffer is 4.77
Explanation:
Using Henderson-Hasselbalch equation we can solve the pH of the buffer:
pH = pKa + log [A⁻] / [HA]
Where pH is the pH of the buffer
pKa is -log Ka = 5.056
[A⁻] = [NaA] = 0.2M
[HA] = 0.39M
Replacing:
pH = 5.056+ log [0.2] / [0.39]
pH = 4.77
The pH of the buffer is 4.77
Determine if the bond between atoms in each example below is nonpolar covalent, polar covalent, or ionic a. H-H b. P-Cl c. F-F d. Na-Br e. N-F f. Mg-O g. C-H h. H-Cl
Answer:
a nonpolar covalent
b polar
c nonpolar
d ionic
e. polar
f. ionic
g polar
h polar
Explanation:
Compare and contrast electron behavior in Rutherford’s, Bohr’s, and the quantum models
Rutherford’s, Bohr’s, and the quantum models say that electrons behave as particles, electron is negatively charged and electrons behave both particles and wave respectively.
What Rutherford’s, Bohr’s, and the quantum models say about electron?Bohr model states that electrons behave as particles, Rutherford's model proposed that the negatively charged electrons surround the nucleus of an atom whereas quantum model explains that the electron has both particle and wave behavior.
So we can conclude that Rutherford’s, Bohr’s, and the quantum models say that electrons behave as particles, electron is negatively charged and electrons behave both particles and wave respectively.
Learn more about electron here: https://brainly.com/question/860094
#SPJ1
what is valence electron configuration for group 4A (14)
Answer:
The group 14 elements all have ns2np2 valence electron configurations. All form compounds in which they formally lose either the two np and the two ns valence electrons or just the two np valence electrons, giving a +4 or +2 oxidation state, respectively
Explanation:
Answer:
The group 14 elements all have ns2np2 valence electron configurations. All form compounds in which they formally lose either the two np and the two ns valence electrons or just the two np valence electrons, giving a +4 or +2 oxidation state, respectively.
Explanation:
In Universe L , recently discovered by an intrepid team of chemists who also happen to have studied interdimensional travel, quantum mechanics works just as it does in our universe, except that there are four d orbitals instead of the usual number we observe here. Use these facts to write the ground-state electron configurations of the third and fourth elements in the first transition series in Universe L .
Answer:
See explanation
Explanation:
The third element in the first transition series is Vanadium
The fourth element in the first transition series is chromium
Given that we have four d orbitals in universe L instead of five as we have on earth;
The electronic configuration of Vanadium in universe L is;
Ar 3d3 4s2
The electronic configuration of chromium in universe L is;
[Ar] 3d4 4s2
A neutral atom has high electronegativity.
Describe what happens to this atom during ionic bond formation.
Please get it cleared and stored into your cerebrum that a cation is formed when a neutral atom loses one or more electrons from its valence electron shell.
However too, on other hand an anion is formed when a neutral atom gains one or more electrons in its outermost electron shell.
A cation means a positive ion
An anion means a negative ion
What is electronegativity?Electronegativity is one of physical periodicity and property of elements that describes the tendency of an atom to attract electrons toward itself.
Generally, electronegativity of an atoms of elements in a particular trend is affected by both its atomic number and the distance that its valence electrons reside from the charged nuclei.
Learn more about electronegativity:
https://brainly.com/question/2456715
#SPJ1
Aqueous sulfuric acid (H2SO4) will react with solid sodium hydroxide (NaOH) to produce aqueous sodium sulfate (Na2SO4) and liquid water (H2O). Suppose 5.88g of sulfuric acid is mixed with 6.3 g of sodium hydroxide. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to 3 significant digits
Answer:
2.16 g H₂O
Explanation:
Since we are not given the limiting reagent, we need to convert both reactants into the product. The actual amount of product will be the smaller mass produced.
To find the answer, we need to (1) convert grams reactant to moles reactant (via molar mass), then (2) convert moles reactant to moles H₂O (via mole-to-mole ratio from balanced equation coefficients), and then (3) convert moles H₂O to grams H₂O (via molar mass). It is important to arrange the ratios in a way that allows for the cancellation of units.
The balanced equation:
1 H₂SO₄(aq) + 2 NaOH(s) -----> 1 Na₂SO₄(aq) + 2 H₂O(l)
Molar Mass (H₂SO₄): 2(1.008 g/mol) + 32.065 g/mol + 4(15.998 g/mol)
Molar Mass (H₂SO₄): 98.073 g/mol
Molar Mass (NaOH): 22.990 g/mol + 15.998 g/mol + 1.008 g/mol
Molar Mass (NaOH): 39.996 g/mol
Molar Mass (H₂O): 2(1.008 g/mol) + 15.998 g/mol
Molar Mass (H₂O): 18.014 g/mol
5.88 g H₂SO₄ 1 mole 2 moles H₂O 18.014 g
---------------------- x ----------------- x ------------------------ x ----------------- =
98.073 g 1 mole H₂SO₄ 1 mole
= 2.16 g H₂O
6.3 g NaOH 1 mole 2 moles H₂O 18.014 g
-------------------- x ----------------- x -------------------------- x ---------------- =
39.996 g 2 moles NaOH 1 mole
= 2.84 g H₂O
Since H₂SO₄ produces the smallest amount of product, it is the limiting reagent. In this case, H₂SO₄ is completely used up before NaOH has the chance to react totally. Therefore, the actual amount of H₂O produced is 2.16 g.
Which substance is not a solid at 20˚C and one atmosphere of pressure?
A. Kr
B. U
C. K
D. Ag
plzzzzzzz help asap its just one question plzzzzz its in the file <3
Answer:
There are 6 atoms of oxygen in 2Ca(NO3)2
What color does red cabbage juice make when mixed with a citrus cleaner?
What color does red cabbage juice make when mixed with a dishwasher soap?
(WILL MARK BRAINLIEST!!!)
Answer:
Explanation:
green
A heterogeneous ore mixture contains 35.0 % In2O3 by mass. How many tons of the ore must be mined to provide 325.0 kg of indium metal? (2000 lb = 1 ton, assume exact)
Answer:
1.2375 ton of ore
Explanation:
Mass of indium = 325
Formula = In2O3
Molar mass = 277.64 g/mol
Molar mass of indium = (2*114.8)g
229.6 indium is in 277.64 of In2O3
Mass of In2O3 required = 277.64/229.6 x 325
= 392.94kg
35 % In2O3 in ore
For 35 kg = 100 kg required
For 392.94,
100/35 x 392.94
= 1122.686 kg
1122.68 x 2.2
= 2469.9 pounds
2469.9/200
= 1.235 tons of ore
The image shown here is a good illustration of which law?
Answer:
A.) Newton's First Law
Explanation:
I'm pretty sure, I'm sorry if I'm wrong, I just looked it up on G o o g l e
I need help ASAP pls
Answer:
A should be the swer n
Explanation:
Why do particles with different masses have the same kinetic energy when at the same temperature?
Answer: Because Kinetic energy depends on temperature and not mass
Explanation:
Average kinetic energy is defined as the average of the kinetic energies of all the particles present in a system. It is determined by the equation:
[tex]K.E=\frac{3RT}{2}[/tex]
where K.E = Kinetic energy
R= gas constant
T= temperature in kelvin
It is visible that kinetic energy is dependent on the temperature of the system and not on the mass of the system. Thus particles with different masses have the same kinetic energy when at the same temperature
At STP, in the equation C(g) + O2(g) --> CO2(g), one liter of O2 yields how many liters of CO2?
Answer:
3 I think but ask someone else too
Enthalpy of reaction of nitrogen dioxide (use Hess Law)
N2(g) + 2O2(g) → 2NO2(g)
N2 + O2 → 2NO Hr= +180 kJmol-1
2NO + O2 → 2NO2 Hr= -112 kJmol-1
Starting Point Ending point
N2 (g) + 2O2 (g) → 2NO2 (g)
+180kJ -112kJ
2NO2 + O2 (g)
Use the information to calculate the H and explain how you got your answer.
Considering the Hess's Law, the enthalpy change for the reaction is 68 kJ/mol.
Hess's LawHess's Law indicates that the enthalpy change in a chemical reaction will be the same whether it occurs in a single stage or in several stages. That is, the sum of the ∆H of each stage of the reaction will give us a value equal to the ∆H of the reaction when it occurs in a single stage.
Enthalpy of reaction of nitrogen dioxideIn this case you want to calculate the enthalpy change of:
N₂ + 2 O₂ → 2 NO₂
which occurs in two stages.
You know the following reactions, with their corresponding enthalpies:
Equation 1: N₂ + O₂ → 2 NO ΔH = 180 kJ/mol
Equation 2: 2 NO + O₂ → 2 NO₂ ΔH = –112 kJ/mol
Because of the way formation reactions are defined, any chemical reaction can be written as a combination of formation reactions, some going forward and some going back.
In this case, first, to obtain the enthalpy of the desired chemical reaction you need one mole of N₂ on reactant side and it is present in first equation so let's write this as such.
In the same way, you need two moles of NO₂ on product side and it is present in second equation so let's write this as such.
Finally, in this way the two moles of NO cancel.
Then, it is not necessary to modify the given equations. So, adding or canceling the reactants and products as appropriate, and adding the enthalpies algebraically, you obtain:
N₂ + 2 O₂ → 2 NO₂ ΔH= 68 kJ/mol
Finally, the enthalpy change for the reaction is 68 kJ/mol.
Learn more about Hess Law:
brainly.com/question/5976752
brainly.com/question/13707449
brainly.com/question/13707449
brainly.com/question/6263007
brainly.com/question/14641878
brainly.com/question/2912965
#SPJ1
In the balanced equation 2C₂H6+ 702 -->4CO2 +6H2O, if 10g of C₂H6 react with
42.5g O₂, what is the limiting reactant?
02
CO₂
H₂O
C₂H6
Answer:
02
Explanation:
The basic concept of getting this right is to divide the individual coefficient of the reactant by the giving mass. the one with the least value scores the limiting reactant or reagent
Explain three types eye protection and their appropriate uses
Answer:
safety glasses, safety goggles, face shield, they protect your eyes from harmful liquids, bright lights
What is the mass of 2.2 moles of magnesium chloride? With work shown
Draw the structures of organic compounds A and B. Indicate stereochemistry where applicable The starting material is ethyne, a carbon carbon triple bond where each carbon is bonded to a hydrogen. Step 1 is N a N H 2 followed by 1 equivalent of C H 3 C H 2 C H 2 B r to form compound A. Compound A reacts with hydrogen and lindlar's catalyst to form compound B. COmpound B reacts with H 2 O and H 3 O Plus to form a 5 carbon chain with a hydroxy substituent on carbon 2.
Answer:
See explanation below
Explanation:
In this case we have the starting reactant which is the ethine, In the first step reacts with NaNH₂, a strong base. This base will substract the hydrogen from one of the carbon of the ethine, and form a carbanion. This will react with the propane bromide, displacing the bromine and forming a 5 carbon chain with the triple bond on the carbon 1 and 2.
In the second step, reacts with the lindlar catalyst to do a reduction, and form a double bond between carbon 1 and 2. In essence, compound A is similar to compound B.
Finally B reacts with water in acid and makes a addition reaction, and form an alcohol.
The whole process can be seen in the picture below.
Hope this helps
What types of energy do lamps give off?
Include how was your day in you answer.
Explain why/if the lamp gives off heat energy.
Answer:
When a lamp is turned on, it gives off light energy and heat energy.
My day was fantastic.
Explanation:
The lamp gives off heat energy because anything that gives off light energy gives off heat energy.
A methane molecule, CH4, in the stratosphere or (2) a CH3 molecule and a hydrogen atom formed from breaking one of the carbon‐hydrogen bonds in a CH4 molecule.
The methane molecule in the stratosphere has a higher potential energy than the CH₃ molecule and the hydrogen atom formed from breaking one of the carbon‐hydrogen bonds in a CH₄ molecule.
The complete question is:
For each of the following situations, you are asked which of two objects or substances has the higher energy. Explain your answer with reference to the capacity of each to do work and say whether the energy that distinguishes them is kinetic energy or potential energy.
a. (1) A methane molecule, CH4, in the stratosphere or (2) a CH3 molecule and a hydrogen atom formed from breaking one of the carbon-hydrogen bonds in a CH4 molecule.
Which have a higher energy?The methane molecule in the stratosphere is a stable molecule and possesses chemical potential energy.
The CH₃ molecule and the hydrogen atom formed from breaking one of the carbon‐hydrogen bonds in a CH₄ molecule are unstable molecules and possesses kinetic energy. However, some of their energy has been used in breaking the bond.
Thus, the methane molecule in the stratosphere has a higher potential energy than the CH₃ molecule and the hydrogen atom formed from breaking one of the carbon‐hydrogen bonds in a CH₄ molecule.
In conclusion, the energy in the methane molecule is higher.
Learn more about potential energy at: https://brainly.com/question/14427111
#SPJ1
QUESTION 17
A mixture of hydrogen, helium and chlorine gases are in a container. The hydrogen has a partial pressure of 0.74 atm, the helium has a partial
pressure of 1.96 atm, and the chlorine has a partial pressure of 409 mmHg. What is the total pressure of the mixture, in atm?
Answer:
3.25 atm
Explanation:
convert 409 mm to atm, then add them all :
409mm / 760mm/atm + .74 + 1.96 = 3.24 atm
The total pressure of the mixture, in atm, is 3.25 atm
A container contains a mixture of hydrogen, helium, and chlorine gases. The partial pressures of the three gases are as follows: 0.74 atm for hydrogen, 1.96 atm for helium, and 409 mmHg for chlorine. 3.25 atm is the mixture's total pressure.
then multiply 409 mm by 1.0 atm, and then combine them all for total pressure :
409mm / 760mm/atm + .74 + 1.96 = 3.24 atm
When more than one gas is present in a container, each gas exerts pressure, which is how atmospheric pressure is defined. Its partial pressure refers to the pressure of any gas inside the container.
To learn more about Partial pressure please visit -
https://brainly.com/question/15075781
#SPJ4
To date, scientific tests of astrology have never found that its predictive methods work.
True
False
true______________________
Select the correct answer.
A 20.0-liter flask contains a mixture of argon at 0.72 atmosphere and oxygen at 1.65 atmospheres. What is the total pressure in the flask?
A. 0.93 atm
B. 2.37 atm
C. 8.44 atm
D. 18.6 atm
Answer:
2.37 atm
Explanation:
0.72+1.65 = 2.37 atm
an analyst prepared a sucrose solution by weighing 1kg of water and add 1.5kg sucrose. estimate the concentration of the resultant solution in degree brix
The concentration of the solution is 60 degrees Brix.
What is degree Brix?Degrees Brix is the sugar content of an aqueous solution. One degree Brix is 1 gram of sucrose in 100 grams of solution and represents the strength of the solution a as percentage by mass.
Mass percent refers to the percentage of solute present in the solution.
The concentration of the substance can be expressed in mass percent.
we have to first calculate mass percent.
So, we can write,
Mass percent = mass of solute / mass of solution x 100.
Mass of solution = mass of solute + solvent.
Here, sucrose is the solute and the water is the solvent.
The mass of the solute is 1.5Kg and the mass of the solvent is 1Kg.
Mass of solution = 1.5 + 1 = 2.5 Kg.
Mass percent = 1.5/2.5x100
Mass percent is 60%.
Here, 1% = 1 degree brix.
So here, 60% = 60 degree brix.
Hence, the concentration of the solution is 60 degree brix.
For a detailed study about mass percent refer given link https://brainly.com/question/13896694.
#SPJ1.
What kind of reactions takes place between Calcium and EDTA?
Answer:
Explanation:
:Determination of total calcium and magnesium Ion concentration
Answer:
Ca2+ ions react to form a stronger complex with the EDTA
Explanation:
As a result, when the calcium ion–PR complex is titrated with EDTA the Ca2+ ions react to form a stronger complex with the EDTA. For the titration, the indicator is added to the sample solution containing the calcium ions and forms the pink/red calcium ion-indicator complex (Ca-PR).
What does cellular respiration do?
Break down sugar and release energy for an
organism to use
Create sugar filled with energy
Deter predators
Form glucose from hydrogen, oxygen, and carbon
:D
help asap
What’s this answer help me out
Several properties of water are shown. Classify each property as a physical property or a chemical property.
-can be split into hydrogen and oxygen
-is liquid at room temperature
-has a density of 1.0 g/cm³
-reacts with certain metals
ASAP
Chemical property:
Can be split into hydrogen and oxygenReacts with certain metalsPhysical property:
Is liquid at room temperatureHas a density of 1.0 g/cm³