The statements which describe some of the original ideas proposed about the universe during the big bang include:
The universe was opaque. The universe was very dense and hot. The universe expanded from a single point. What is Big bang theory?This theory describes how the universe expanded from a single point to form the earth we are living in.
it states that the very dense and hot environment led to it thereby making it the most appropriate choice.
Read more about Big bang theory here https://brainly.com/question/6841128
#SPJ1
Name the following ether: OCH2CH3
A. ethyl benzyl ether
B. methyl phenyl ether
C. ethyl phenyl ether
D. ethyl propyl ether
The name of the given ether is ethyl benzyl ether .
What are ethers?Ethers are organic compounds formed when nan oxygen atom is bonded to two alkyl or aryl groups.
Ethers usually have relatively high boiling points as a result of the central oxygen atom. An example of an ether, is ethyl propyl ether
The name of the given ether is ethyl benzyl ether as it has a benzyl and ethyl group attached to the oxygen atom.
In conclusion, ethers are characterized by an oxygen atom bonded to two alkyl or aryl groups.
Learn more about ethers at: https://brainly.com/question/20772030
#SPJ1
What mass of oxygen reacts during the incomplete combustion of 18.0 g of propane?
Based on the mole ratio, the mass of oxygen reacting is 45.8 g.
What mass of oxygen reacts during the reaction?The incomplete combustion of propane with oxygen produces carbon (ii) oxide and water.
The mole ratio of propane to oxygen according to the equation of the reaction is 2 : 7.
Molar mass of propane = 44 g/mol
Molar mass of oxygen = 32 g/mol
moles in 18.0 g = 18/44 mole
Mass of oxygen reacting = 18/44 * 7/2 * 32 = 45.8
In conclusion, incomplete combustion of propane produces carbon (ii) oxide.
Learn more about combustion reaction at : https://brainly.com/question/10458605
#SPJ1
Liquids A and B form an ideal solution. The vapor pressure of pure A is 0.700 atm at the normal boiling point of a solution prepared from 0.250 mole of B and 0.650 mole of A. What is the vapor pressure of pure B at this temperature
The vapor pressure of pure B is 1.77atm
Given:-
Vapor pressure of Pure A = 0.700atm
Mole of A = 0.650mole
Mole of B = 0.250mole
Dalton's law of partial pressures states that the total pressure exerted by a gas mixture is equal to the sum of the partial pressures of all of the constituent gases.
So, Ptotal = [tex]P_A + P_B[/tex]
According to Raoult's law, a solvent's partial vapor pressure in a solution (or mixture) is equal to or the same as the pure solvent's vapor pressure times the mole fraction present in the solution.
So, Ptotal = [tex]X_AP_A + X_BP_B[/tex]
Ptotal = 1atm
1atm = (0.650/0.650+0.250 X 0.700atm) + 0.250/0.650+0.250 X [tex]P_B[/tex]
1atm = 0.722 X 0.700atm + 0.278 X [tex]P_B[/tex]
1atm = 0.506atm + 0.278 X [tex]P_B[/tex]
1atm - 0.506atm = 0.278 X [tex]P_B[/tex]
0.494atm = 0.278 X [tex]P_B[/tex]
[tex]P_B[/tex] = 0.494atm / 0.278
[tex]P_B[/tex] = 1.77atm
Learn more about vapor pressure
https://brainly.com/question/26671872
#SPJ4
In the redox reaction below, which is the reducing agent?
MnO2(s) + 4H+(aq) + 2Cl–(aq) Right arrow. Mn2+(aq) + 2H2O(l) + Cl2(g)
CI–
CI2
Mn2+
MnO2
In the following redox reaction, the reducing agent is MnO2 (option D). Details about reducing agent can be found below.
What is a reducing agent?A reducing agent in a redox reaction is any substance that reduces, or donates electrons to another, hence, it becomes oxidized.
According to this question, a redox reaction is given as follows: MnO2(s) + 4H+(aq) + 2Cl–(aq) = Mn2+(aq) + 2H2O(l) + Cl2(g)
As shown in the equation, MnO2 is oxidized into Mn2+, therefore, it is the reducing agent.
Learn more about reducing agent at: https://brainly.com/question/2890416
#SPJ1
Given the incomplete equation for the combustion of ethane (C2H6): 2 C2H6 7 O2 --> 4 CO2 6 ___ Group of answer choices
The correct option is D. H2O.
For the combustion of ethane (C2H6); the chemical equation is;
2 C2H6 + 7 O2 --> 4 CO2 + 6 H2O.
All hydrocarbons go through combustion processes, and the only byproducts are water (H2O) & carbon dioxide (CO2).
What is hydrocarbons?Any of a group of organic molecules with only the atoms carbon (C) & hydrogen are known as hydrocarbons (H). The hydrogen atoms bind to the carbon atoms in a variety of ways to create the compound's structural framework. chemical mixture.
The classification of hydrocarbons are done by-
It is not necessary for a substance to be classified into a single class; rather, this categorization of hydrocarbons is meant to help in the association of structural traits with properties. In fact, it is typical for molecules to contain structural elements that are unique to two or even more hydrocarbon families. For instance, a molecule with a benzene ring and a carbon-carbon triple bond would have certain features that are typical of alkynes and some that are typical of arenes.Alkenes, alkynes, and aromatics are referred to as unsaturated hydrocarbons, whilst alkanes are regarded as saturated hydrocarbons.To know more about hydrocarbons, here
https://brainly.com/question/5495325
#SPJ4
The complete question is -
Given the incomplete equation for the combustion of ethane (C2H6): 2 C2H6 + 7 O2 --> 4 CO2 + 6 ___
Group of answer choices:
A. H2O2
B. HCOOH
C. CH3OH
D. H2O
How many moles of MgCl₂ are present in 60.0 mL of 0.100 M MgCl₂ solution?
There is 0.0600moles of MgCl2 in 60.0ml of 0.100M MgCl2 solution.
Explanation:
First we need to determine the number of moles of MgCl2 in 60.0L of solution.
After determining the number of moles,now multiply moles of MgCl2 by its Molar mass i.e (95.205g/mol)
We know Molarity= mol of solute/L solution
∴ 0.10 M MgCl2 = 0.10mol MgCl2/L
Step1:
First convert 60.0ml to litres.
1L=1000mL
60.0mL×1L/1000mL=0.0600L
Step2:
To determine moles of MgCl2, multiply 0.0600 L by the molarity of the solution
0.0600L×0.10mL/1L=0.0600mol MgCl2
∴ 0.0600moles of MgCl2 are present in 60.0mL of 0.100M MgCl2 solution.
what is molar mass?Relative molar mass is defined as the smallest mass unit of a compound with one twelfth of the mass of one carbon – 12 atom.
In a substance, the amount of entities present for e.g. atoms, molecules, ions, is defined as a mole. A mole of any substance is 6.022×1023 molecules. Just as we take a standard value to calculate different things e.g. 1 dozen =12 items similarly we use the mole to calculate the size of the smallest entities quantitatively.
To refer more about molar mass refer the below attached link
https://brainly.in/textbook-solutions/q-define-molecular-mass
what is molarity?Molarity of a solution is defined as the number of moles of the solute dissolved per litre of the solution. I is represented as \textbf{`M`}. Thus a solution, which contains one gram mole of the the solution dissolved per litre* of the solution is regarded as molarity.
To learn more about molarity refer the below attached link
https://brainly.in/question/1159016
#SPJ2
If 10.0 moles of sulfur dioxide react with excess chlorine gas, what is the theoretical yield (in grams) of CI2O produced?
Answer:
869 g Cl₂O
Explanation:
To find the theoretical yield of Cl₂O, you need to (1) convert moles SO₂ to moles Cl₂O (via mole-to-mole ratio from reaction coefficients) and then (2) convert moles Cl₂O to grams Cl₂O (via molar mass). It is important to arrange the conversions/ratios in a way that allows for the cancellation of units (the desired unit should be in the numerator). The final answer should have 3 sig figs to reflect the sig figs of the given amount (10.0 moles).
1 SO₂ (g) + 2 Cl₂ (g) ----> 1 SOCl₂ (g) + 1 Cl₂O (g)
Molar Mass (Cl₂O): 2(35.453 g/mol) + 15.998 g/mol
Molar Mass (Cl₂O): 86.904 g/mol
10.0 moles SO₂ 1 mole Cl₂O 86.904 g
------------------------ x ---------------------- x ------------------ = 869 g Cl₂O
1 mole SO₂ 1 mole
Which state of matter is being described below?
It cannot be squashed easily, spreads out slowly, is of medium density & flows to
fill up space
A. Plasma
B. Liquid
C. Gas
D. Solid
Answer:
C. Gas
Explanation:
I think this is the right answer because it fits the description
Since volume and temperature are constant, this means that pressure and_____are____proportional. the sample with the largest____will have the_____pressure.
Since volume and temperature are constant, this means that pressure and number of moles are directly proportional. the sample with the largest number of moles will have the high pressure.
Since, the ideal gas equation is also called ideal gas law. So, according to ideal gas equations,
PV = nRT
P is pressure of the sampleT is temperatureV is volume n is the number of molesR is universal gas constantAt constant volume and temperature the equation become ,
P ∝ nR
since, R is also constant. So, conclusion of the final equation is
P ∝ n
The number of moles and pressure of the sample is directly proportion. So, on increasing number of moles in the sample , pressure of the sample also increases.
learn about ideal gas law
https://brainly.com/question/4147359
#SPJ4
when gas evolution becomes very slow, heat the solution gently in the hood, then allow it to cool. What gas is formed in this reaction
Nitrogen gas is formed in this reaction.
Nitrogen gasAtomic number 7 and the letter N designate nitrogen as the chemical element. Group 15 of the periodic table, often known as the pnictogens, contains nitrogen as the lightest nonmetal element. It ranks eighth in overall abundance in the Milky Way and the Solar System, making it a common element in the cosmos. Two of the element's atoms combine to create the colorless and odorless diatomic gas N2 at standard temperature and pressure. The most common element that isn't mixed, N2 makes up around 78 percent of the Earth's atmosphere. All living things contain nitrogen, which is mostly found in amino acids (and thus proteins), nucleic acids (DNA and RNA), and the energy-transfer molecule adenosine triphosphate.
Learn more about nitrogen gas here:
https://brainly.com/question/14642361
#SPJ4
Briefly explain how you would name an organic compound containing each of the functional groups.
Functional groups include hydroxyl, methyl, carbonyl, carboxyl, amino, phosphate, and sulfhydryl.
Functional groups:
Regardless of the other atoms in a molecule, functional groups are particular groupings of atoms within molecules that have their own distinctive capabilities.
The prefixes di, tri, and tetra are applied when there are several substituents. Function-specific groups contain identifying suffixes. For instance, the parent chain name of alcohols has the suffix "ol" and a number indicating the location of the hydroxyl group. One is used to identify ketones.
If a compound has multiple functional groups, the highest priority functional group will be considered the "parent structure" and will define the "parent name"; the remaining functional groups will be considered the "substituents." The name of the parent structure is denoted by the "suffix," and the substituent is denoted by the "prefix."
Learn more about functional groups here:
https://brainly.com/question/16770113
#SPJ1
Zinc Sulfide reacts with oxygen according to the reaction:
2ZnS (s) + 3 O2(g) 2 ZnO (s) +2 SO2 (g)
A reaction mixture contains 4.2 moles of zinc sulfide and 6.8 moles of oxygen. Once the reaction occurred as a completely as possible, what amount in moles is left of the excess reactant?
The amount in moles of the excess reactant left is 0.5 mole
Balanced equation2ZnS (s) + 3O₂(g) --> 2ZnO (s) + 2SO₂(g)
From the balanced equation,
2 moles of ZnS reacted with 3 moles of O₂
How to determine the excess reactantFrom the balanced equation,
2 moles of ZnS reacted with 3 moles of O₂
Therefore,
4.2 moles of ZnS will react with =(4.2 × 3) / 2 = 6.3 moles of O₂
From the calculations made above, we can see that only 6.3 moles of O₂ out of 6.8 moles given, is required to react completely with 4.2 moles of ZnS.
Thus, ZnS is the limiting reactant and O₂ is the excess reactant.
How to determine the mole of the excess reactant remainingThe excess reactant is O₂. Thus the mole remaining after the reaction can be obtained as illustrated below:
Mole of O₂ given = 6.8 molesMole of O₂ that reacted = 6.3 molesMole of O₂ remaining =?Mole of O₂ remaining = (Mole of O₂ given) - (Mole of O₂ that reacted)
Mole of O₂ remaining = 6.8 - 6.3
Mole of O₂ remaining = 0.5 mole
Learn more about stoichiometry:
https://brainly.com/question/25685654
#SPJ1
What is the name of the amide bond between amino acids?
a. polyamide bond
b. polyamine bond
c. polyamino acids bond
d. protein bond
e. peptide bond
The name of the amide bond between amino acids will be peptide bond.
Peptide bonds are amide-type covalent bonds that form bonds that connect two adjacent alpha-amino acids throughout peptide or protein chains, starting at C1 of one as well as [tex]N_{2}[/tex] of another.
The substances are known as amino acids, or the "building blocks of proteins," and play a variety of vital functions in the human body. Humans require them for essential functions like producing hormones, neurotransmitters, even proteins. In meals high in protein like meat, fish, as well as soybeans, amino acids could be concentrated.
Therefore, the name of the amide bond between amino acids will be peptide bond.
Hence, the correct answer will be option (e)
To know more about peptide bond
https://brainly.com/question/15078143
#SPJ4
1. You have learned that alkyl iodides may be prepared by SN2 replacement of other leaving groups, or by treatment of alcohols or ethers with co centrated hydriodic acid (HI). A milder method for preparation of alkyl iodides from alcohols is shown below:
Imidazole's cyclic structure is aromatic and the lone pair present at the N₁ atom available for donation. hence, according to question N₁ is the most basic atom in the structure.
What is resonating structure?Two π bonds (between C₂-C₃ and N₁-C₅), as well as one lone pair on N₄, can interact with one another to generate a delocalized π system in the cyclic structure.This delocalization is intriguing since it has the same number of delocalized electrons as benzene—six.As a result, imidazole, like benzene, has a closed, delocalized ring with six π electrons. So, like benzene, it is regarded as an aromatic chemical with resonance stability.N₄ is neutral since it cannot be donated because it needs to use its lone pair to be aromatic.On the other hand, N₁ already forms a π connection, which helps the system become delocalized.N₁ is sp² hybridized and has a trigonal planar basic form. Its lone pair cannot communicate with the delocalized π system since it is pointed away from the cyclic structure.Know more about Resonating structure
https://brainly.com/question/8155254
#SPJ4
What is the smallest whole-number coefficient for h₂s when the equation h₂s mno₄⁻ → mn²⁺ so₄²⁻ is balanced in acidic solution?
The lowest smallest whole-number coefficient for H₂S is 5. Option C
What is the smallest whole-number coefficient for H₂S?Now we know that a redox reaction is one in which there is a loss and gain of electrons One specie is oxidized (looses electrons) while another specie is reduced (gains electrons). The electrons must be transferred leading to an increase in oxidation number of one specie and a decrease in the oxidation number of another.
Now the reduction half equation is;
MnO4^-(aq) + 8H^+(aq) + 5e^- ----> Mn^2+(aq) + 4H2O (l)
The oxidation half equation is;
H2S(aq) ----> S^2-(aq) + 2H^+(aq) + 2e^-
Multiplying the reduction half equation by 2 and the oxidation half equation is 5
2MnO4^-(aq) + 16H^+(aq) + 10e^- ----> 2Mn^2+(aq) + 8H2O (l)
And;
5H2S(aq) ----> 5S^2-(aq) + 10H^+(aq) + 10e^-
The overall balanced reaction equation is;
2MnO4^-(aq) + 6H^+(aq) + 5H2S(aq) ----> 2Mn^2+(aq) + 8H2O (l) + 5S^2-(aq)
Thus the lowest smallest whole-number coefficient for H₂S is 5.
Learn more about redox reaction:https://brainly.com/question/13293425
#SPJ1
You have two buffered solutions. Buffered solution 1 consists of 5.0 M HOAc and 5.0 M NaOAc; buffered solution 2 is made of 0.050 M HOAc and 0.050 M NaOAc. How do the pHs of the buffered solutions compare
The pH of buffered solution is:
The two buffered solutions have 'equal' pH values.
Comparison between two buffer solutions:
To compare the pH of two different buffer solutions with different concentrations, Henderson-Hasselbalch equation is used.
pH = pKa + log [tex]\frac{Salt}{Acid}[/tex]
pKa of HOAc = 4.76
In solution 1:
Concentration of salt= 5 M
Concentration of acid= 5 M
Putting the values in the equation,
pH = 4.76 + log [tex]\frac{5}{5}[/tex]
pH = 4.76 + log1
pH = 4.76
In solution 2:
Concentration of salt= 0.050 M
Concentration of acid= 0.050 M
Putting the values in the equation,
pH = 4.76 + log[tex]\frac{0.050}{0.050}[/tex]
pH = 4.76 + log1
pH = 4.76
As the ratio [tex]log\frac{salt}{acid}[/tex] is the same for the different solutions.
Therefore, the pH of the solution remains the same in both the buffer solutions even if the two solutions have different concentrations.
Learn more about buffer solutions here,
https://brainly.com/question/15991816
#SPJ4
Which molecules are types of lipids?
Answer: The answer is fatty acids and triglycerides
Explanation:
What mass of oxygen reacts during the incomplete combustion of 18.0 g of propane?
Answer:
66 grams of carbon dioxide
C3H8+5O2=3CO2+4H2O
A mole is a name for a specific number of things. What is the value of a mole? write the number using scientific notation. By what other name is it known? (2 points)
The value of a mole is 6.022 ×[tex]10^{23}[/tex]. The other name of mole is Avogadro's number.
The mole is define as 6.022 ×[tex]10^{23}[/tex] of the chemical unit like atoms , molecules, ions or others.It is very convenient unit because of huge numbers o f atoms, molecules or others. This is very important unit used by chemist.
One mole = atomic Mass of atoms / molecular mass of molecule
Example: one mole of sodium = 23 g = atomic mass
Learn about chemical unit
https://brainly.com/question/10997426
#SPJ4
The procedure calls for 2.0 ml of concentrated nitric acid. how many moles is this?
Answer:
ρHNO₃= 1.51 g/cm3
ρ = m/V
m = ρ x V
m = (1.51 g/cm3)(2 cm3)= 3.02 g de HNO₃
n = m/PM = 3.02 g/63.01 g/mol = 0.0479 mol de HNO₃
Explanation:
2 mL of concentrated nitric acid equals 0.0479 mol
5.18 L of nitrogen gas at 76.0°C are cooled to 6.0°C at constant pressure. Calculate the new volume of
the gas.
(write your answer in this space with sig digs and units - submit your work in the work space provided)
Answer:
0.409 L
Explanation:
Because you are dealing with volume and temperature, you need to use the Charles' Law equation:
V₁ / T₁ = V₂ / T₂
In this equation, "V₁" and "T₁" represent the initial volume and temperature. "V₂" and "T₂" represent the final volume and temperature.
V₁ = 5.18 L V₂ = ? L
T₁ = 76.0 °C T₂ = 6.0 °C
V₁ / T₁ = V₂ / T₂ <----- Charles' Law equation
5.18 L / 76.0 °C = V₂ / 6.0 °C <----- Insert values
0.06815789 = V₂ / 6.0 °C <----- Simplify left side
0.409 L = V₂ <----- Multiply both sides by 6.0
For what mechanistic reason does g1 of lactase first act as a brønsted acid during catalysis?.
Glucose becomes a better leaving group.
In a manner similar to how protonation of an alcohol makes it easier to substitute a -OH group, glucose becomes a better leaving group when the oxygen atom is protonated.
What is Bronsted acid-base theory?A substance that releases or donates hydrogen ions during a chemical reaction is referred to as a Bronsted-Lowry acid. A Bronsted-Lowry base, on the other hand, takes hydrogen ions. Another way to look at it is that a base accepts protons whereas a Bronsted-Lowry acid donates them. Amphoteric species are those that, depending on the circumstance, can either give or take protons.
Every Bronsted-Lowry acid gives a species that is its conjugate base a proton in exchange for the species' support. Each base in the Bronsted-Lowry system similarly accepts a proton from its conjugate acid.
I understand the question you are looking for is this:
For what mechanistic reason does G1 of lactase first act as a Bronsted acid during catalysis?
A) G1 becomes a better nucleophile
B) G2 becomes a better nucleophile
C) Glucose becomes a better leaving group.
D) Galactose becomes a better leaving group.
Learn more about Bronsted acid and base here:
https://brainly.com/question/148529
#SPJ4
Which best describes the oxidizing agent in this reaction?
Cl2(aq) + 2Br–(aq) Right arrow. 2Cl–(aq) + Br2(aq)
Bromine (Br) is the oxidizing agent because it gains an electron.
Bromine (Br) is the oxidizing agent because it loses an electron.
Chlorine (Cl) is the oxidizing agent because it gains an electron.
Chlorine (Cl) is the oxidizing agent because it loses an electron.
For the reaction Cl₂(aq) + 2 Br⁻(aq) ⇒ 2Cl⁻(aq) + Br₂(aq), Chlorine (Cl) is the oxidizing agent because it gains an electron.
What is the oxidizing agent?In a redox reaction, the oxidizing agent is the one that gains electrons, causing the other element to oxidize.
Let's consider the following redox reaction.
Cl₂(aq) + 2 Br⁻(aq) ⇒ 2Cl⁻(aq) + Br₂(aq)
The corresponding half-reactions are:
Reduction: 2 e- + Cl₂(aq) ⇒ 2Cl⁻(aq)
Oxidation: 2 Br⁻(aq) ⇒ Br₂(aq) + 2 e-
Which best describes the oxidizing agent in this reaction?
Bromine (Br) is the oxidizing agent because it gains an electron. NO. Br is the reducing agent.Bromine (Br) is the oxidizing agent because it loses an electron. NO. Br is the reducing agent.Chlorine (Cl) is the oxidizing agent because it gains an electron. YES.Chlorine (Cl) is the oxidizing agent because it loses an electron. NO. Cl gains electrons.For the reaction Cl₂(aq) + 2 Br⁻(aq) ⇒ 2Cl⁻(aq) + Br₂(aq), Chlorine (Cl) is the oxidizing agent because it gains an electron.
Learn more about oxidizing agents here: https://brainly.com/question/9064518
#SPJ1
Answer:
C: Chlorine (Cl) is the oxidizing agent because it gains an electron.
Explanation:
He nitrogen cycle is one of the most important (and complex!) of the biogeochemical cycles. Why is nitrogen important?
Nitrogen is an essential part of proteins and nucleic acids (DNA).
Why is nitrogen important?All living things require nitrogen. It is a part of proteins, ATP, chlorophyll, DNA, and RNA. Given that it makes up a significant portion of the structures of biomolecules in living organisms, its synthesis and consumption in the biogeochemical cycle are of highest importance. Proteins are made up of amino acids (NH2 group).
The structural development of living species' genetic material (DNA, RNA) also involves nitrogen. It is a part of the nitrogenous bases, which together with other nucleotides create RNA and DNA.
Therefore, a nitrogen deficit can cause major structural issues for such an organism.
What happens if nitrogen cycle is disrupted?A number of undesirable consequences can result from the nitrogen cycle being disrupted. For instance, an abundance of nitrogen in aquatic systems leads to eutrophication. Acid rain can be caused by a rise in atmospheric nitrogen.
The majority of ecosystems can tolerate low nitrogen levels since the majority of nitrogen is not biologically accessible in nature. Ecosystems become out of balance when humans significantly increase the quantity of nitrogen that is accessible through fertilizers, fertilizer use, and other means.
Learn more about importance of nitrogen here:
https://brainly.com/question/14728440
#SPJ4
6) What is the pH of a solution with [H3O+] = 1 × 10-9 M?
A) 1.0 × 10-5
B) -9.0
C) 5.0
D) -5.0
E) 9.0
Answer:
E) 9.0
Explanation:
pH = -log [1×10^-9] = 9
Conclusion: why do you think it is important to record your data with all the decimals provided by the instruments even if they are zero? How does this help with data analysis?
Consider the following intermediate chemical equations.
CH₂(g) → C(s) + 2H₂(g)
ΔΗ, = 74.6KJ
CCl4(g) →C(s) + 2Cl₂(g)
AH₂ = 95.7 kJ
H₂(g) + Cl₂(g) → 2HCl(g)
AH₂=-92.3 KJ
What is the enthalpy of the overall chemical reaction CH4(g)+4Cl₂(g) → CCl4(g) + 4HCI(g)?
O-205.7 kJ
O-113.4 kJ
O-14.3 kJ
O 78.0 kJ
Based on the calculations, the enthalpy of the overall chemical reaction is equal to: C. -14.3 kJ.
What is a chemical reaction?A chemical reaction can be defined as a chemical process that involves the continuous transformation (rearrangement) of the ionic, atomic or molecular structure of a chemical element by breaking down and forming chemical bonds, in order to produce a new chemical compound while new bonds are formed.
What is a chemical equation?A chemical equation can be defined as a group of chemical symbols that is typically used in chemistry to represent the chemical reaction between two (2) or more chemical elements.
Mathematically, an expression for enthalpy of the overall chemical reaction is given by:
ΔHrxn = (n × ΔH₃) + (-n × ΔH₁) + (n × ΔH₂)
Where:
n represents the number of moles.
Substituting the given points into the formula, we have;
ΔHrxn = (2 × ΔH₃) + (-1 × ΔH₁) + (1 × ΔH₂)
ΔHrxn = (2 × (-92.3)) + (-1 × (-74.6)) + (1 × (-95.7))
ΔHrxn = -184.6 + 74.6 + 95.7
ΔHrxn = -14.3 kJ.
Read more on enthalpy here: https://brainly.com/question/12993630
#SPJ1
Match the instrument described below with the decimal place of the
value to which this instrument must be recorded.
our meter stick
our quadruple beam scale
a 100 mL cylinder
a 1 L cylinder
The decimal place value of these instrument must be recorded as (i) our meter scale = 1 (ii) our quadruple beam scale = 0.001 (iii) a 100 mL cylinder = 1 (iv) a 1 L cylinder = 0.001.
What is Meter Stick ?Meter stick which is used to measure the length especially used in the construction industry. The meter stick is 1 meter long. The metric unit for length is meter.
What is Quadruple beam scale ?This is the instrument which is used to measure the mass very precisely. In quadruple beam scale the reading error is 0.001.
Thus from the above conclusion we can say that The decimal place value of these instrument must be recorded as (i) our meter scale = 1 (ii) our quadruple beam scale = 0.001 (iii) a 100 mL cylinder = 1 (iv) a 1 L cylinder = 0.001.
Learn more about the Instrument here: https://brainly.com/question/4674934
#SPJ1
Disclaimer: The question was given incomplete on the portal. Here is the complete question.
Question: Match the instrument described below with the decimal place of the value to which this instrument must be recorded. ( 1 , 0.01 , 0.001 , 0.1 , 10 choose)
our meter stick =
our quadruple beam scale =
a 100 ml cylinder=
a 1 L cylinder=
calculate the number of moles in 2 kg of iron
Answer:
111600 moles
Explanation:
Number of moles= Mass ×Mr, where Mr is the relative molecular mass of the substance of interest. Note that the mass is calculated in terms of grams (1 kg= 1000 g), while the Mr can be found using the periodic table.
Mass of iron
= 2 kg
= 2(1000)
= 2000 g
Mr of iron= 55.8
Number of moles
= 2000(55.8)
= 111600 mol
Additional:
To learn more about stoichiometry, do check out the following!
https://brainly.com/question/21042927You can use mass percent composition as a conversion factor between grams of a constituent element and grams of the compound. Write the conversion factor (including units) inherent in each mass percent composition. (a) Water is 11.19% hydrogen by mass. (b) Fructose, also known as fruit sugar, is
You can use mass percent composition as a conversion factor between grams of a constituent element and grams of the compound. The conversion factor in each mass percent composition are (a) 11.19 g H‚ 100 g H₂O (b) 53.29 g O‚100 g fructose (c) 84.12 g C‚100 g octane (d) 52.14 g C‚100 g ethanol
What is the Mass Percent ?The percent by mass of each element present in a compound is called Mass Percent.
(a) Water is 11.19% hydrogen by mass.
Here it is given mass of hydrogen is 11.19 %. That means 11.19 % of solute should be added in 100 g H₂O.
(b) Fructose, also known as fruit sugar, is 53.29% oxygen by mass.
Here it is given mass of oxygen is 53.29 %. That means in 53.29% of solute should be added in 100 g fructose.
(c) Octane, a component of gasoline, is 84.12% carbon by mass.
Here it is given mass of carbon is 84.12 %. That means in 84.29% of solute should be added in 100 g Octane.
(d) Ethanol, the alcohol in alcoholic beverages, is 52.14% carbon by mass.
Here it is given mass of carbon is 52.14 %. That means in 52.14% of solute should be added in 100 g Ethanol.
Thus from the above conclusion we can say that You can use mass percent composition as a conversion factor between grams of a constituent element and grams of the compound. The conversion factor in each mass percent composition are (a) 11.19 g H‚100 g H2O (b) 53.29 g O‚100 g fructose (c) 84.12 g C‚100 g octane (d) 52.14 g C‚100 g ethanol
Learn more about the Mass percent composition here: https://brainly.com/question/26150306
#SPJ4
Disclaimer: The question was given incomplete on the portal. Here is the complete question.
Question: You can use mass percent composition as a conversion factor between grams of a constituent element and grams of the compound. Write the conversion factor (including units) inherent in each mass percent composition.
(a) Water is 11.19% hydrogen by mass.
(b) Fructose, also known as fruit sugar, is 53.29% oxygen by mass.
(c) Octane, a component of gasoline, is 84.12% carbon by mass.
(d) Ethanol, the alcohol in alcoholic beverages, is 52.14% carbon by mass.