Write the quadratic equation whose roots are -3 and 6, and whose leading coefficient is 4

We have:

y(4) + y''' + y'' = 0

First, let's rewrite the equation using the common notation for derivatives:

y'''' + y''' + y'' = 0

Now, we need to find the characteristic equation, which is obtained by replacing each derivative with a power of r:

r^4 + r^3 + r^2 = 0

Factor out the common term, r^2:

r^2 (r^2 + r + 1) = 0

Now, we have two factors to solve separately:

1) r^2 = 0, which gives r = 0 as a double root.

2) r^2 + r + 1 = 0, which is a quadratic equation that doesn't have real roots. To find the complex roots, we can use the quadratic formula:

r = (-b ± √(b^2 - 4ac)) / 2a

Plugging in the values a = 1, b = 1, and c = 1, we get:

r = (-1 ± √(-3)) / 2

So the two complex roots are:

r1 = (-1 + √(-3)) / 2
r2 = (-1 - √(-3)) / 2

Now we can write the general solution of the differential equation using the roots found:

y(x) = C1 + C2*x + C3*e^(r1*x) + C4*e^(r2*x)

Where C1, C2, C3, and C4 are constants that can be determined using initial conditions or boundary conditions if provided.

To know more about constants, visit:

https://brainly.com/question/31730278

#SPJ11

The remaining keys are hashed and placed in the table using linear probing until all keys are placed.

The hash table that results from using the hash function h(k) = k mod 13 to hash the keys 2, 7, 4, 41, 15, 32, 25, 11, and 30, assuming collisions are handled by linear probing:
Index       Key
0      
1      
2             2
3             4
4             30
5             41
6             15
7             7
8             25
9             11
10    
11    
12            32
To fill in the table, we apply the hash function to each key and then check whether that index is already occupied.

If it is, we move to the next index and continue until we find an empty spot. In this case, we start with the key 2, which hashes to index 2.

This index is empty, so we insert the key there.

Next, we hash the key 7, which also goes to index 2.

Since that spot is already occupied, we move to the next index (3) and find that it's empty, so we insert 7 there.

We continue in this way for each key, resolving collisions by linear probing.
For similar question on remaining keys:

https://brainly.com/question/30755956

#SPJ11

The correlation coefficient between the student's height and the distance they were able to jump is -1.13.

To compute the correlation coefficient (r) between the person's height and the distance they were able to jump, we need to use the given formula:

[tex]r = \sum (xi - \bar x)(yi -\bar y) / \sqrt{(\sum (xi - \bar x)^2 * \sum (yi -\bar y)^2)[/tex]

Where:

In our case,

[tex]\bar x[/tex] = 64.44

[tex]\bar y = 6.06[/tex]

Square the differences and sum them:

[tex]\sum ((xi -\bar x)^2) =307.84\\\\\sum ((yi -\bar y )^2) = 2.7224[/tex]

Calculate the correlation coefficient using the formula:

[tex]r = -32.63 / \sqrt{(307.84 * 2.7224)}\\\\r = -32.63 / \sqrt{838.74158}\\\\\r = -32.63 / 28.96\\\\r = -1.128[/tex]

Therefore, the correlation coefficient (r) for the linear fit between height and jump distance is approximately -1.13.

Learn more about correlation coefficient here:

brainly.com/question/27246345

#SPJ1

Casey earned $780.25 in tips last week.

To calculate the amount Casey earned in tips last week, we can follow these steps:

Step 1: Calculate Casey's earnings from the hourly rate.

Casey's hourly rate is $4.55 per hour.

Casey worked for 26 hours.

Multiply the hourly rate by the number of hours worked: $4.55 * 26 = $118.30.

Step 2: Determine the total earnings for the week.

Casey's total earnings for the week, including the hourly rate and tips, is $898.55.

Step 3: Calculate the tips earned.

Subtract Casey's earnings from the hourly rate ($118.30) from the total earnings ($898.55) to get the amount of tips earned: $898.55 - $118.30 = $780.25.

Therefore, Casey earned $780.25 in tips last week. This is obtained by subtracting Casey's earnings from the hourly rate ($118.30) from the total earnings ($898.55). Therefore, the correct answer is d. $780.25.

To know more about algebra, visit:

https://brainly.com/question/6505681

#SPJ11

The symbolic logic statement ¬(∃x)(P(x) ∧ Q(x)) ∧ (∀y)(R(y) → P(y)) can be translated into English as "Not exists an x such that both P(x) and Q(x) are true, and for all y, if y satisfies R(y), then y satisfies P(y)."

Breaking it down further, the statement can be understood as follows

¬(∃x)(P(x) ∧ Q(x)): This portion asserts the negation of the existence (∃) of an x for which both P(x) and Q(x) are true. In other words, it claims that there does not exist any x that satisfies both P(x) and Q(x).

(∀y)(R(y) → P(y)): This part establishes a universal (∀) quantifier, stating that for all y, if y satisfies R(y), then y also satisfies P(y). In simpler terms, it implies that whenever y meets the condition R(y), it must also satisfy P(y).

Overall, the statement conveys that there is no x that simultaneously satisfies P(x) and Q(x), and it further states that for every y, if y satisfies R(y), it must also satisfy P(y). This statement asserts a negative existence of a certain condition (P(x) ∧ Q(x)) and establishes a universal implication between R(y) and P(y).

To know more about symbolic logic statement here

https://brainly.com/question/30571247

#SPJ4

(a) The vector field →F is not a gradient field since its curl is nonzero.

(b) The vector field →G is a gradient field since its curl is zero.

(c) The vector field →H is not a gradient field since its curl is nonzero.

(a) To find the curl of →F, we compute the determinant of the curl matrix:

curl →F = (∂/∂y)(3xz) →i + (∂/∂z)(3xy+yz) →j + (∂/∂x)(5x^2+z^2) →k = -3y →i + 3x →j - 2z →k

Since the curl is nonzero (-3y →i + 3x →j - 2z →k), →F is not a gradient field.

(b) To find the curl of →G, we compute the determinant of the curl matrix:

curl →G = (∂/∂y)(3xy+2yz) →i + (∂/∂z)(3yz) →j + (∂/∂x)(z^2-3xz) →k = 0 →i + 0 →j + 0 →k

Since the curl is zero, →G is a gradient field.

(c) To find the curl of →H, we compute the determinant of the curl matrix:

curl →H = (∂/∂y)(2yz-3) →i + (∂/∂z)(6xy+5x^3) →j + (∂/∂x)(3x^2+z^2) →k = 0 →i + (-3) →j + 0 →k

Since the curl is nonzero (-3 →j), →H is not a gradient field.

Learn more about vector field here: brainly.com/question/102477

#SPJ11

The ordered pairs that represent this relationship include the following:

A. (2, 7)

C. (4, 14)

In Mathematics and Geometry, a proportional relationship is a type of relationship that produces equivalent ratios and it can be modeled or represented by the following mathematical equation:

y = kx

Where:

Next, we would determine the constant of proportionality (k) by using various data points as follows:

Constant of proportionality, k = y/x

Constant of proportionality, k = 7/2 = 14/4

Constant of proportionality, k = 3.5.

Therefore, the required linear equation is given by;

y = kx

y = 3.5x

Read more on proportional relationship here: brainly.com/question/28350476

#SPJ1

Step 1:

To complete the fib_recur function for calculating the n-th Fibonacci number recursively, use the following code:

```python

def fib_recur(n):

   if n <= 0:

       return 0

   elif n == 1:

       return 1

   else:

       return fib_recur(n - 1) + fib_recur(n - 2)

```

The provided code implements a recursive approach to calculate the n-th Fibonacci number. In this algorithm, we first check if the input `n` is less than or equal to 0. If so, we return 0, as Fibonacci numbers start from 0. Next, we check if `n` is equal to 1 and return 1 since the first Fibonacci number is defined as 1. For any other value of `n`, we recursively call the `fib_recur` function, passing `n-1` and `n-2` as arguments, and sum up their results. This process continues until `n` reaches 0 or 1, which are the base cases.

The recursive approach relies on the fact that Fibonacci numbers can be represented as the sum of the two preceding Fibonacci numbers. By breaking down the problem into smaller subproblems, the function gradually calculates the desired Fibonacci number. However, it is important to note that the recursive solution has exponential time complexity, making it inefficient for large values of `n`. Implementing dynamic programming techniques or memoization can significantly improve the performance of the Fibonacci calculation.

Learn more about Fibonacci sequence

brainly.com/question/29764204

#SPJ11

I'm sorry, there seems to be some missing information in the question. Please provide the values of "a" and "b", and clarify what "q" represents in the density function.

To know more about probability refer here:

https://brainly.com/question/30034780

#SPJ11

There are six children, and we need to choose one of them to be a boy. This can be done in 6 choose 1 ways, which is simply 6.  Therefore, there are 6 different gender orders possible for this family.

To find the total number of different orders, we can think of it as choosing one position for the boy among the six children. There are six positions in total (firstborn, second-born, etc.). In each position, the boy could be placed, with the remaining positions filled by the girls.

There are six possible gender orders for this family, since the only stipulation is that exactly one child is a boy. The birth order of the children doesn't matter in this case, since the question is only concerned with the gender distribution.

To find the number of possible gender orders, we can use the combination formula.

There are six children, and we need to choose one of them to be a boy. This can be done in 6 choose 1 ways, which is simply 6.

Therefore, there are 6 different gender orders possible for this family.

Here are the six possible gender orders:
- BGGGGG
- GBGGGG
- GGBGGG
- GGGBGG
- GGGGBG
- GGGGGB

In each case, there is exactly one boy and five girls. Note that the birth order of the children could be different in each case, but that doesn't affect the gender order.

Know more about the combination

https://brainly.com/question/28065038

#SPJ11

The correct statements are:

b. The population variances for each of the cells should be equal (i.e., there is homogeneity of variance).

c. The populations from which the samples are taken for a two-way ANOVA must be distributed normally.

In a two-way ANOVA, there are several assumptions that need to be met for valid statistical inference. Two of these assumptions are the equality of population variances and the normal distribution of populations.

b. The assumption of homogeneity of variance states that the population variances for each combination of levels of the two factors in a two-way ANOVA should be equal. Violation of this assumption can lead to biased results and affect the validity of the statistical test.

c. The assumption of normality states that the populations from which the samples are taken should follow a normal distribution. This assumption is important because the validity of the F-test used in ANOVA is based on the assumption of normality. Departures from normality can impact the accuracy and reliability of the results.

a. The statement in option (a) is not true. The two-way ANOVA is not robust to violations of the assumptions of sampling from normal distributions and homogeneity of variance, even if the samples are of equal size. Violations of these assumptions can lead to inaccurate and unreliable results.

d. The statement in option (d) is also not true. If the assumptions of a two-way ANOVA are violated, it does not necessarily mean that the researcher should conduct two separate one-way ANOVAs. There are alternative non-parametric tests or robust ANOVA methods that can be used in such cases. The choice of appropriate statistical analysis depends on the nature of the data and the specific research question.

Learn more about ANOVA here:

https://brainly.com/question/30763604

#SPJ11

The graph is a disjoint collection of isolated vertices.

If all the entries in the ith row and ith column of the adjacency matrix of a graph are 0 for every positive integer i, we can conclude that the graph is a disjoint collection of isolated vertices.

In a graph, the adjacency matrix represents the connections between vertices. Each row and column in the adjacency matrix corresponds to a specific vertex in the graph.

A non-zero entry in the matrix indicates an edge between two vertices, while a zero entry indicates no edge.

If all the entries in the ith row and ith column are 0, it means that the vertex corresponding to that row/column is not connected to any other vertex in the graph.

In other words, each vertex is isolated and not connected to any other vertices.

Therefore, when all entries in every row and column of the adjacency matrix are 0, the graph consists of isolated vertices, and there are no edges connecting them.

Learn more about graph theory and its fundamentals

brainly.com/question/1151791

#SPJ11

The color you are most likely to choose at the fifth selection would be green.

The number of ways to rank the colors is 720 ways.

The number of different two-color combinations are 15.

When 4 red M & Ms are taken out, there will be :

= 5 - 4

= 1 red

The color with the highest number after that would be green with 10 M & Ms. This one therefore has the largest probability of being selected next.

The ranking of the colors of the M & Ms from first to sixth would be:

= 6 x 5 x 4 x 3 x 2 x 1

= 720 ways

The number of two-color combinations that can be made from six different colors is :

C ( 6, 2 ) = 6 ! / [ 2 !( 6 - 2 ) ! ]

= 15 different two-color combinations

Find out more combinations at https://brainly.com/question/5547741

#SPJ1

(a) The mold constant in Chvorinov's rule can be calculated using the formula t = C x V^n, where t is the solidification time, V is the volume of the casting, and n and C are constants. Given n=2, we can use the given solidification time of 4.6 min and the volume of the 2-in. cube (2x2x2) to calculate the mold constant C. Thus, C = t / V^n = 4.6 / 2^2 = 1.15. Therefore, the mold constant is 1.15.
(b) To calculate the solidification time for the 0.5 in. x 0.5 in. x 6 in. bar, we can use Chvorinov's rule again. The volume of the bar is (0.5 x 0.5 x 6) = 1.5 in^3. Thus, using the mold constant found in part (a), we can calculate the solidification time of the bar as t = C x V^n = 1.15 x 1.5^2 = 2.59 min. Therefore, the solidification time for the 0.5 in. x 0.5 in. x 6 in. bar is 2.59 min.

In casting, it is important to know the solidification time of the metal being poured to ensure that it cools and solidifies properly. Chvorinov's rule is a method used to estimate the solidification time of a casting. It assumes that the rate of solidification is proportional to the surface area of the casting and the temperature difference between the casting and the mold.

To calculate the mold constant in Chvorinov's rule, we can use the formula t = C x V^n, where t is the solidification time, V is the volume of the casting, and n and C are constants. Given the solidification time and the volume of the 2-in. cube, we can solve for C to find the mold constant.

To calculate the solidification time for the 0.5 in. x 0.5 in. x 6 in. bar, we can use the mold constant found in part (a) and the volume of the bar. Substituting these values in Chvorinov's rule formula, we can find the solidification time of the bar.

Chvorinov's rule is a useful method to estimate the solidification time of a casting. By calculating the mold constant and using the formula, we can determine the solidification time for different casting shapes and sizes. In this example, we calculated the mold constant and solidification time for a 2-in. cube and a 0.5 in. x 0.5 in. x 6 in. bar.

To know more about Chvorinov's rule visit:

https://brainly.com/question/13945604

#SPJ11

a. The function f(x) is not continuous at x = 2.

b. The function f(x) is continuous from the right at x = 2.

c. The interval of continuity for f(x) is (-∞, 2) U (2, ∞)

a. To determine the continuity of f(x) at x = 2, we need to check if the three conditions for continuity are satisfied. Firstly, the function f(x) is not defined at x = 2 since there are two different definitions for x less than 2 and x greater than or equal to 2. Thus, f(x) is not continuous at x = 2.

b. However, f(x) is continuous from the right at x = 2 because the limit of f(x) as x approaches 2 from the right exists and is equal to the function value at x = 2. As x approaches 2 from the right, f(x) approaches 3, which is equal to the function value at x = 2.

c. The interval of continuity for f(x) is (-∞, 2) U (2, ∞), which means that f(x) is continuous for all x less than 2 and for all x greater than 2, excluding the point x = 2.

learn more about continuous function here:

https://brainly.com/question/28228313

#SPJ11

The statement that is also true to ΔQSR ≅ ΔYXZ is  ΔQRS ≅ ΔYZX.

Two triangles are defined to be congruent if all three corresponding sides are equal and all the three corresponding angles are equal in measure. In other words, triangles are congruent when they have exactly the same three sides and exactly the same three angles.

Therefore,

ΔQSR ≅ ΔYXZ

Therefore, another statement that is equal to the congruency of the triangle is as follows:

ΔQRS ≅ ΔYZX

learn more on congruent triangle here: https://brainly.com/question/4132028

#SPJ1

A Leslie matrix is a tool used in population biology to study population dynamics. It is a square matrix whose entries represent the survival and reproduction rates of individuals in different age classes. The eigenvalues of a Leslie matrix can provide valuable insights into the long-term behavior of a population.

If a Leslie matrix has a unique positive eigenvalue 1, it indicates that the population is growing exponentially. If the value of the eigenvalue is greater than 1, it means that the population is growing at an increasing rate and will continue to do so in the long run. This implies that the population size will increase over time, and the distribution of individuals across age classes will shift towards the younger ages.

On the other hand, if the value of the eigenvalue is less than 1, it means that the population is declining in size, and the distribution of individuals across age classes will shift towards the older ages. If the eigenvalue is exactly 1, the population size will remain stable in the long run, and the distribution of individuals across age classes will be constant.

To know more about Leslie matrix refer to-

https://brainly.com/question/565673

#SPJ11

The null hypothesis to test whether the slope coefficient for DISTANCE is significantly greater than zero is "beta < or = 0" (C), and the alternative hypothesis is "beta > 0".

Based on question, we want to test if the slope coefficient for DISTANCE is significantly greater than zero using a simple regression analysis.

To do this, we need to state the null and alternative hypotheses.
The correct hypotheses in this case are:
Null hypothesis (H0): beta <= 0
Alternative hypothesis (H1): beta > 0
So, the correct answer is option C:
C. Null: beta <= 0; Alternative: beta > 0
In this case, the null hypothesis states that the slope coefficient (beta) for DISTANCE is less than or equal to zero, meaning there is no positive relationship between DISTANCE and FARE.

The alternative hypothesis states that the slope coefficient (beta) is greater than zero, indicating a positive relationship between DISTANCE and FARE.

For similar question on hypothesis.

https://brainly.com/question/26185548

#SPJ11

The null hypothesis states that the slope coefficient (beta) is less than or equal to zero, meaning there is no positive relationship between FARE and DISTANCE. The alternative hypothesis states that the slope coefficient is greater than zero, suggesting a positive relationship between FARE and DISTANCE.

The null and alternative hypotheses to test whether the slope coefficient for DISTANCE is significantly greater than zero are:

Null hypothesis: β ≤ 0

Alternative hypothesis: β > 0

Option A represents the null and alternative hypotheses for testing the correlation coefficient (ρ), which is not applicable in this scenario. Option B represents the null and alternative hypotheses for testing whether the intercept is significantly greater than zero. Option C represents the null and alternative hypotheses for testing whether the slope coefficient is significantly less than or equal to zero. Option D represents the null and alternative hypotheses for testing whether the correlation coefficient is significantly less than or equal to zero. Therefore, the correct answer is A. Null: β ≤ 0; Alternative: β > 0.

To test whether the slope coefficient for DISTANCE is significantly greater than zero, you should state the null and alternative hypotheses as follows:

Null hypothesis (H0): β ≤ 0
Alternative hypothesis (H1): β > 0

This corresponds to option C in your question. The null hypothesis states that the slope coefficient (beta) is less than or equal to zero, meaning there is no positive relationship between FARE and DISTANCE. The alternative hypothesis states that the slope coefficient is greater than zero, suggesting a positive relationship between FARE and DISTANCE.

Learn more about null hypothesis at: brainly.com/question/28920252

#SPJ11

Data validation rule set for range B5:F5 to allow only whole number values greater than 0.

To set a data validation rule for the range B5:F5 that allows only whole number values greater than 0, follow the steps below:

Select the range B5:F5.

Click on "Data" in the top menu, then select "Data Validation."

In the "Criteria" section, select "Whole number" from the drop-down menu.

In the "Data" section, select "greater than" and enter "0" in the box.

Click "Save."

After setting this rule, any values entered in the range B5:F5 that are not whole numbers or are less than or equal to 0 will be rejected. This can help ensure that the data entered in these cells is accurate and consistent with the requirements of the worksheet.

Learn more about Data validation here

https://brainly.com/question/28272539

#SPJ11

The vector in the direction is [1/sqrt(46), 3/sqrt(46), 2/sqrt(46), 0]

A unit vector in the direction of u is u/|u| where |u| is the magnitude of u.

To find the magnitude of u, we use the formula:

|u| = sqrt(1^2 + 6^2 + 3^2 + 0^2) = sqrt(46)

So, a unit vector in the direction of u is:

u/|u| = [1/sqrt(46), 6/sqrt(46), 3/sqrt(46), 0/sqrt(46)]

Simplifying the vector, we get:

[1/sqrt(46), 3/sqrt(46), 2/sqrt(46), 0]

Learn more about vector here

https://brainly.com/question/25705666

#SPJ11

Given function is  [tex]\h(x) = \frac{x^2 - 9}{x - 1}\[/tex]

To graph the given function, we need to find intercepts and asymptotes of the given function.In order to find x-intercepts, we need to equate h(x) to zero and solve for x.

So,

[tex]\frac{x^2 - 9}{x - 1} = 0[/tex]

=> x² - 9 = 0

=> x = ±3∴ x-intercepts are (–3, 0) and (3, 0)

Now, to find the y-intercept, we set x = 0. We get,y = (0² - 9) / (0 - 1) = 9So, y-intercept is (0, 9)

To find vertical asymptotes, we need to find the value of x that makes the denominator zero.

So, x - 1 = 0

=> x = 1

Thus, the vertical asymptote is x = 1

To find horizontal asymptotes, we check the degree of the numerator and denominator. Here, degree of numerator is 2 and degree of denominator is 1.So, the degree of numerator is greater than the degree of denominator.

Therefore, there is no horizontal asymptote.Graph of the given function:h(x) = (x² - 9) / (x - 1)Here, red lines are asymptotes, blue points are intercepts, and green point is point of interest.

To know more about intercepts visit:

https://brainly.com/question/14180189

#SPJ11

If the demand for apartments near campus increases, ceteris paribus (assuming all other factors remain constant), basic supply and demand analysis predicts that the equilibrium price of apartments near campus will increase.

When demand increases, the quantity of apartments demanded exceeds the quantity supplied at the current price. This creates upward pressure on prices as consumers compete for the limited available supply.

As a result, sellers can increase the price to capture the increased demand and reach a new equilibrium where the quantity demanded equals the quantity supplied.

Therefore, the equilibrium price of apartments near campus is expected to rise in response to an increase in demand.

Know more about equilibrium price here:

brainly.com/question/28527601

#SPJ11

The first four terms of the Maclaurin series of f(x) can be determined using the provided values. The Maclaurin series is an expansion of a function around x = 0. In this case, the series can be expressed as f(x) = -10 + 4x - (1/2)x^2 + (11/6)x^3 + ...

To find the coefficients of the series, we can use the formula for the Maclaurin series coefficients. The coefficient of x^n is given by f^(n)(0) / n!, where f^(n)(0) represents the nth derivative of f(x) evaluated at x = 0.

Using the provided values, we have f(0) = -10, f'(0) = 4, f"(0) = -2, and f"'(0) = 11. Plugging these values into the formula, we can find the coefficients for each term in the series.

For the first four terms, the coefficients are as follows:

The coefficient of x^0 is f(0) = -10.

The coefficient of x^1 is f'(0) = 4.

The coefficient of x^2 is f"(0) / 2! = -2 / 2 = -1.

The coefficient of x^3 is f"'(0) / 3! = 11 / 6.

Therefore, the first four terms of the Maclaurin series for f(x) are -10 + 4x - (1/2)x^2 + (11/6)x^3.

Learn more about Maclaurin series here:

https://brainly.com/question/31745715

#SPJ11

The population of the fish when t=10 is approximately 221,407.

Let's first define the differential equation that describes the rate of change of the population:

dP/dt = kP

Where dP/dt represents the rate of change of the population over time (t), k is a constant of proportionality, and P is the population.

To solve this differential equation, we can separate the variables and integrate both sides:

1/P dP/dt = k

Integrating both sides with respect to t and applying the initial condition when t=2, we get:

ln(P) - ln(400000) = k(t-2)

ln(P) = k(t-2) + ln(400000)

P = e^(k(t-2) + ln(400000))

Now, we need to find the value of k by using the other given condition when t=4:

350000 = e^(k(4-2) + ln(400000))

k = ln(350000/400000)/2

k = -0.040821

Finally, we can substitute this value of k and t=10 into the equation we derived earlier:

P = e^(-0.040821(10-2) + ln(400000))

P = e^(-0.325848 + 12.899220)

P = 221407.06

Rounding this to the nearest integer, we get:

P ≈ 221,407

The population of the fish when t=10 is approximately 221,407.

To know more about integer, visit;

https://brainly.com/question/929808

#SPJ11

The solution to the differential equation satisfying the initial condition p(1) = 2 is p(t) = 2e^(2t-2).

To find the solution, we first need to solve the differential equation. Integrating both sides, we have ∫dp = ∫2p dt. This gives us ln|p| = 2t + C, where C is the constant of integration. Taking the exponential of both sides, we get |p| = e^(2t+C). Since p(1) = 2, we can substitute t = 1 and p = 2 into the equation to find C.

Thus, 2 = e^(2(1)+C) = e^(2+C), which implies C = ln(2). Substituting this value back into the equation, we have |p| = e^(2t+ln(2)) = 2e^(2t). Finally, we can drop the absolute value sign to obtain the solution p(t) = 2e^(2t-2).

For more questions like Differential equation click the link below:

https://brainly.com/question/14598404

#SPJ11

Answer:

[tex]x =[/tex] 1 3/5

Step-by-step explanation:

Isolate the variable by dividing each side by factors that don't contain the variable.

Exact form:

[tex]x = 8/5[/tex]

Decimal Form:

[tex]x = 1.6[/tex]

Mixed Number Form:

[tex]x =[/tex] 1 3/5

Hope this helps! Have a great day! And please mark me brainly. :)

The experimental probability of rolling a 1 or a 2 is 0.2.

Hence, Option A is correct.

We know that,

The experimental probability of an event is defined as the number of times the event occurred divided by the total number of trials.

In this case,

The event is rolling a 1 or a 3,

Which occurred ⇒  3 + 1

                           = 4 times.

Given that there are total number of trials = 20.

Therefore,

The experimental probability of rolling a 1 or a 3 = 4/20,

                                                                                = 1/5

                                                                                 = 0.2

Hence, the required probability is 0.2.

Learn more about the probability visit:

https://brainly.com/question/13604758

#SPJ1

The complete question is:

Sarah is playing a game in which she rolls a number cube 20 times. The results are recorded in the chart below. What is the experimental probability of rolling a 1 or a 3?

Number on cube:1,2,3,4,5,6

Number of times event occurs:3,6,1,5,3,2

A.0.2

B.0.3

C.0.6

D.0.83

The experimental probability of a spinner landing on purple (P) in Experiment A is 4/10 or 2/5.

To determine the experimental probability of the spinner landing on purple (P) in Experiment A, we need to count the number of times the spinner landed on purple and divide it by the total number of spins.

Looking at the results in Experiment A, we can see that the spinner landed on purple (P) twice.

Total number of spins = 10 (as given in the table)

Therefore, the experimental probability of the spinner landing on purple (P) in Experiment A is:

= Number of times landing on purple / Total number of spins

= 2/10

= 1/5.

As, the spinner landed on purple twice then

= 2 x 1/5

= 2/5

Learn more about Probability here:

https://brainly.com/question/30297781

#SPJ1

The series is absolutely convergent. In this code, the always block is used to implement the loop. The initial block is used to initialize the values of x, y, and i.

We can use the Comparison Test to determine whether the series is absolutely convergent, conditionally convergent, or divergent. We can compare the given series with the series [infinity] n = 1 1/n^2, which is a known convergent p-series with p = 2.

To use the Comparison Test, we need to find a positive constant M such that |sin(n)/(n^2)| <= M/n^2 for all n greater than some fixed value N.

Since -1 <= sin(n) <= 1 for all n, we have:

|sin(n)/(n^2)| <= 1/n^2

So we can choose M = 1 and use the Comparison Test as follows:

sum(sin(n)/(n^2)) <= sum(1/n^2)

Since the series on the right-hand side is convergent, the series on the left-hand side is absolutely convergent by the Comparison Test. Therefore, the series is absolutely convergent. In this code, the always block is used to implement the loop. The initial block is used to initialize the values of x, y, and i. The assign statements are used to assign the values of x and y to the output ports.

Learn more about convergent here

https://brainly.com/question/15415793

#SPJ11

No, we cannot use the normal approximation in this scenario.The normal approximation relies on certain conditions being met, such as having a large sample size and a roughly symmetric distribution.

In this case, you flipped a coin 200 times and obtained 85 tails. Since the sample size is sufficiently large (n=200), that condition is met. However, the distribution of coin flips follows a binomial distribution, which is generally not symmetric unless the probability of success (getting a tail) is close to 0.5. In your case, the probability of success is 0.5 (assuming a fair coin), but the number of tails (85) is not close to half of the flips (100). This asymmetry indicates that the binomial distribution is not well-approximated by a normal distribution. Therefore, it would be more appropriate to use the binomial distribution itself or other methods specifically designed for analyzing binomial data, rather than relying on the normal approximation.

Learn more about probability here: https://brainly.com/question/31828911

#SPJ11