You are in a laboratory creating a new chocolate bar. You want to create the sweetest chocolate bar by maximizing the sugar concentration. You are doing this by adding the sugar to a chocolate mixture. Which would allow you to dissolve more sugar?

The answer: Add the sugar after heating the mixture.

Answers

Answer 1

Adding the sugar after heating the mixture would allow you to dissolve more sugar, which would result in a sweeter chocolate bar.

When you dissolve sugar in a liquid, such as in a chocolate mixture, there is a limit to the amount of sugar that can be dissolved at a given temperature. This limit is known as the solubility of the sugar in that liquid. The solubility of sugar in water is higher at higher temperatures, which means that you can dissolve more sugar in hot water than in cold water. The same principle applies to chocolate mixtures.

By heating the chocolate mixture, you increase the temperature of the mixture, which in turn increases the solubility of the sugar in the mixture. This allows you to dissolve more sugar in the mixture than if you were to add the sugar to the mixture at room temperature or when it is cold.

To know more about solubility of sugar here

https://brainly.com/question/2279296

#SPJ1

--The given question is incorrect, the correct question is

"You are in a laboratory creating a new chocolate bar. You want to create the sweetest chocolate bar by maximizing the sugar concentration. You are doing this by adding the sugar to a chocolate mixture. Which would allow you to dissolve more sugar?"--

Related Questions

Similar to For Practice 14.8) Determine the freezing point of an aqueous solution that contains 0.867 m glycerin (CHgOz).
Ki(water) = 1.86°C/m and Kg(water) - 0.512°C/m. Freezing point of water = 0.0 °C.

Similar to For Practice 14.3) Find the mass (in grams) of glucose (CH1206) in 505 mL of 10.5% glucose solution by mass. Assume the density of the solution is 1.04g/mL

Answers

The freezing point of the solution containing 0.867 m glycerin is -1.61442 °C. Option C is correct

The mass of glucose in 505 mL of 10.5% glucose solution is 53.01 g or 5.30 x 10^2 g.

Option C is correct

To find the freezing point depression of the solution containing 0.867 m glycerin:

ΔTf = Kf * molality

ΔTf = (1.86°C/m) * 0.867 m

ΔTf = 1.61442 °C

The freezing point depression is 1.61442 °C.

The freezing point of the solution is:

Freezing point = 0.0 °C - ΔTf

Freezing point = 0.0 °C - 1.61442 °C

Freezing point = -1.61442 °C

To find the mass of glucose in 505 mL of 10.5% glucose solution:

Mass of glucose = Volume of solution * Density of solution * % mass

Mass of glucose = 505 mL * 1.04 g/mL * 10.5%

Mass of glucose = 53.01 g

For more question on freezing point click on

https://brainly.com/question/30948897

#SPJ11

1. HCI (aq) + NaOH (aq) → NaCl (aq) + H₂O (1)
a. What are the reactants?
b. What are the products?

Answers

In the given reaction, the reactants are hydrochloride acid (HCI) and sodium hydroxide (NaOH). The products are sodium chloride (NaCl) and water.

The chemical equation provided represents a neutralization reaction between hydrochloric acid (HCI) and sodium hydroxide (NaOH) in aqueous solution.

A neutralization reaction is a type of double displacement reaction in which an acid and a base react to form salt and water.

The reactants in this equation are hydrochloric acid (HCI) and sodium hydroxide (NaOH). Hydrochloric acid is a strong acid that dissociates in water to form hydrogen ions (H+) and chloride ions (Cl-). Sodium hydroxide, on the other hand, is a strong base that dissociates in water to form sodium ions (Na+) and hydroxide ions (OH-).

To learn more about reactants, follow the link:

https://brainly.com/question/29816521

#SPJ1

help w calorimeter problems pls.

Answers

1. The specific heat capacity of the metal is 0.102 J/gºC

2. The specific heat capacity of the metal is 0.432 J/gºC

3. The final temperature of water is 16.7 °C

1. How do I determine the specific heat capacity of the metal?

First, we shall obtain the heat absorbed by the water. This is shown below:

Volume of water = 125 mLMass of water (M) = 125 gInitial temperature (T₁) = 22 °CFinal temperature (T₂) = 25.4 °CChange in temperature (ΔT) = 25.4 - 22 = 3.4 °CSpecific heat capacity of water (C) = 4.184 J/gºC Heat absorbed by water (Q) =?

Q = MCΔT

Q = 125 × 4.184 × 3.4

Q = 1778.2 J

Finally, we shall determine the specific heat capacity of the metal. This is shown below:

Heat absorbed by water (Q) = 1778.2 JHeat released by metal (Q) = -1778.2 JMass of metal (M) = 2.36×10² gInitial temperature (T₁) = 99.5 °CFinal temperature (T₂) = 25.4 °CChange in temperature (ΔT) = 25.4 - 99.5 = -74.1 °CSpecific heat capacity of metal (C) = ?

Q = MCΔT

-1778.2 = 2.36×10² × C × -74.1

-1778.2 = -17487.6 × C

Divide both sides by -17487.6

C = -1778.2 / -17487.6

Specific heat capacity of metal = 0.102 J/gºC

2. How do I determine the specific heat capacity of the metal?

As discussed above, we shall first obtain the heat absorbed by the water. This is shown below:

Volume of water = 75.2 mLMass of water (M) = 75.2 gInitial temperature (T₁) = 20.5 °CFinal temperature (T₂) = 28.6 °CChange in temperature (ΔT) = 28.6 - 20.5 = 8.1 °CSpecific heat capacity of water (C) = 4.184 J/gºC Heat absorbed by water (Q) =?

Q = MCΔT

Q = 75.2 × 4.184 × 8.1

Q = 2548.56 J

Finally, we shall determine the specific heat capacity of the metal. This is shown below:

Heat absorbed by water (Q) = 2548.56 JHeat released by metal (Q) = -2548.56 JMass of metal (M) = 95.3 gInitial temperature (T₁) = 90.5 °CFinal temperature (T₂) = 28.6 °CChange in temperature (ΔT) = 28.6 - 90.5 = -61.9 °CSpecific heat capacity of metal (C) = ?

Q = MCΔT

-2548.56 = 95.3 × C × -61.9

-2548.56 = -5899.07 × C

Divide both sides by -5899.07

C = -2548.56 / -5899.07

Specific heat capacity of metal = 0.432 J/gºC

3. How do i determine the final temperature of water?

The final temperature is the same as the equilibrium temperature of the mixture. Thus, we shall obtain the equilibrium temperature. Details below:

Mass of warm water (Mᵥᵥ) = 100Temperature of warm water (Tᵥᵥ) = 50 °CMass of cold water (M) = 50 gTemperature of cold water (T) = 20 °CEquilibrium temperature (Tₑ) =?

Heat loss by warm water = Heat gain by cold

MᵥᵥC(Tᵥᵥ - Tₑ) = MC(Tₑ - T)

Cancel out C

Mᵥᵥ(Tᵥᵥ - Tₑ) = M(Tₑ - T)

100 × (50 - Tₑ) = 50 × (Tₑ - 20)

Clear bracket

1500 - 100Tₑ = 50Tₑ - 1000

Collect like terms

1500 + 1000 = 50Tₑ + 100Tₑ

2500 = 150ₑ

Divide both side by 150

Tₑ = 2500 / 150

Tₑ = 16.7 °C

The equilibrium temperature is 16.7 °C.

Thus, we can conclude that the final temperature of the water is 16.7 °C

Learn more about specific heat capacity:

https://brainly.com/question/19104255

#SPJ1

2
Select the correct answer.
Which phrase best describes heat?
OA.
B.
OC.
D.
the energy that an object has as a result of its temperature
the average translational kinetic energy of the particles in an object
the energy transferred between objects at different temperatures
the total amount of energy possessed by the particles in an object

Answers

Heat is most accurately described as "the energy transferred between objects at different temperatures" (C). Until they reach thermal equilibrium, or the same temperature, heat is a type of energy that flows freely from a hotter to a colder item.

Heat can be transferred through conduction, convection, or radiation. The temperature differential between the items and the thermal conductivity of the materials involved determine how much heat is transported.

Temperature, a measurement of the average kinetic energy of the particles in an item, is not the same as heat. Internal energy is the entire amount of energy held by an object's particles, which includes both their kinetic and potential energies.

Learn more about Temperature at :

https://brainly.com/question/15267055

#SPJ1

Other Questions

given the following reaction, what is the molarity of naoh if 131 ml of 0.200 m h 2so 4 reacts with 70.0 ml of naoh? h 2so 4 2 naoh na 2so 4 2 h 2o The bottom of a box is a rectangle with length 5 cm more than the width. The height of the boxis 4 cm and its volume is 264 cm3. Find the dimensions of the bottom of the box F (*) - -42 + 4 and g (a) - 20; + 20, what is f (g (4)? Give a parametric description of the form r(u, v) = x(u, v),y(u, v),z(u, v) for the following surface. The cap of the sphere x^2 +y^2 + z^2 = 16, for 2 squareroot 3 lessthanorequalto z lessthanorequalto 4 Select the correct choice below and fill in the answer boxes to complete your choice. The population of a country dropped from 51.7 million in 1995 to 45.7 million in 2007 . assume that p(t), the population, in millions, t years after 1995, is decreasing according to the exponential decay model.a) find the value of k, and write the equation.b) estimate the population of the country in 2020.c) after how many years will the population of the country be 2 million, according to this model? PLEASE HELP!! 50 POINTS!! Read the following passage from Muir's "Calypso Borealis" and respond to the prompt.[1] After earning a few dollars working on my brother-in law's farm near Portage [Wisconsin], I set off on the first of my long lonely excursions, botanising in glorious freedom around the Great Lakes and wandering through innumerable tamarac and arbor-vitae swamps, and forests of maple, basswood, ash, elm, balsam, fir, pine, spruce, hemlock, rejoicing in their bound wealth and strength and beauty, climbing the trees, revelling in their flowers and fruit like bees in beds of goldenrods, glorying in the fresh cool beauty and charm of the bog and meadow heathworts, grasses, carices, ferns, mosses, liverworts displayed in boundless profusion.[2] The rarest and most beautiful of the flowering plants I discovered on this first grand excursion was Calypso borealis (the Hider of the North). I had been fording streams more and more difficult to cross and wading bogs and swamps that seemed more and more extensive and more difficult to force one's way through. Entering one of these great tamarac and arbor-vitae swamps one morning, holding a general though very crooked course by compass, struggling through tangled drooping branches and over and under broad heaps of fallen trees, I began to fear that I would not be able to reach dry ground before dark, and therefore would have to pass the night in the swamp and began, faint and hungry, to plan a nest of branches on one of the largest trees or windfalls like a monkey's nest, or eagle's, or Indian's in the flooded forests of the Orinoco described by Humboldt.What creates tone in a piece of writing? Identify the tone (or tones) of this passage. Explain how the tone(s) is created, providing at least two examples from the passage and explaining how each contributes specifically to the tone(s) you identified. Your response should be a paragraph of 57 sentences. Two guy wires support a flagpole,FH. The first wire is 11. 2 m long and has an angle of inclination of 39 degrees. The second wire has an angle of inclination of 47 degrees. How tall is the flagpole to the nearest tenth of a metre? Standard women's clothing sizes are designed to fit women between 64 and 68 inches in height. A dress designer and manufacturer wants to produce clothing so that at least 60% of women clients are covered in this range. A random sample of 50 of their regular clients had 34 of them with heights between 64 and 68 inches. Are the conditions for inference for a one-proportion z test met the industry demand is q = 100 2p. the monopolist cost function is c = 0.01q2 q 100. what is the monopolists equilibrium quantity of production? A three branch parallel circuit has resistors of 27 W, 56 W, and 15 W. What is the total resistance? Select the correct statement(s) regarding Digital Subscriber Line (DSL).a. DSL describes a family of specification over local loop UTPb. DSL is another name for ISDNc. DSL is implemented over coaxial cablesd. all statements are correct Doubling the momentum of a neutron(a) decreases its energy(b) doubles its energy(c) doubles its wavelength(d) halves its wavelength(e) none of these. What is the accelerating voltage of an x-ray tube that produces x rays with a shortest wavelength of 0.0103 nm? Determine if the following vector field is conservative on its domain. If so, find a potential function. F = (2y,2x+z2,2yz) Select the correct choice below and fill in the answer box to complete your choice as needed. A. The function is conservative on its domain and has a potential function phi(x,y) = (2xy + C). B. The function is not conservative on its domain. in any game, any strategy of any player is a best response to some beliefs this player has about the strategies of his opponents. a. true b. false reza has a fixed-term tenancy for her apartment with studio apartments. if reza abandons the premises before the lease expires O a. Studio must make a reasonable attempt to evict Rita. Ob Rita may be required to mitigate her damages, O c. Rita is no longer obligated to pay the rent. d. Studio may be required to mitigate its damages, malate dehydrogenase and lactate dehydrogenase can both use -ketoglutarate as a substrate. draw the product of those reactions. Write an expression for the product 6x 15x^3 without a perfect square factor in the radicand A $100 billion increase in government purchases has a greater effect on real GDP than a $100 billion reduction in net taxes becausea. some of the income consumers gain from the tax reduction will be saved rather than spentb. some of the income consumers gain from the tax reduction will be spent on services rather than productsc. some of the income consumers gain from the tax reduction will be spent on goods made in foreign countriesd. the consumers' MPC is higher than the government'se. the consumers' MPC is 1 Accessing vRealize On-Demand ResourcesTime Required: 40 minutesObjective: Use vRealize to access on-demand resources.Requirements: A MyVMware user account and passwordDescription: Assume you are a developer working for the Rain Tree company to develop a Web application for the UAS organization. In this activity you will use VMware Lab to deploy a Web server to work with.1. If necessary, start your Windows 10 desktop computer and open a browser window to VMware.com.2. Log on to your MyVMware account.3. If necessary scroll down and under More Available Free Trials, click VIew all and then click Start an Evaluation to display the Select a Product Trial page.4. Scroll down to the bottom of the page and click on the VMware Hands-on Labs link.5. If necessary, on the left-hand pane, click the Labs icon and then scroll down and click the Focus: vRealize Suite link.6. Scroll down the labs and then click the Enroll button in the HOL-1721-USE-1 vRealize Automation 7 Basics lab and if necessary enter your VMware account name and password to register.7. Click the Start this Lab button and read the initial Lab Overview information.8. When you get to the Module 1 page, click the Introduction link and read through the Introduction pages and perform the requested operations.9. Complete each of lessons from Module 1 What can vRealize Automation 7 do for you.10. After completing all the labs, click the Log Out link at the top right of the page and then click Yes to return to the lab catalog page.11. This completes the steps for this activity; in the next activity you will perform the administration tasks to learn how to configure a vRealize cloud environment.