You need a capacitance of 50 µF , but you don't happen to have a 50 µF capacitor. You do have a 90 µF capacitor. What additional capacitor do you need to produce a total capacitance of 50 µF?

The actual distance is 6 km. The solution to the problem is as follows: By ratio and proportion: 1:20 = 0.3:x, Cross multiplying: 20(0.3) = x, x = 6

Therefore the answer is the first choice or letter A which is 6 km.

It just seems slick, almost like touching ice but without the frigid sensation, according to my firsthand experience of both. Sorry, it's really nothing exceptional. Any surface would be sufficient if it had some lubrication oil on it.

In reality, there are no frictionless planes. If they did exist, items on them would almost certainly behave exactly as Galileo predicted if they did. Despite not existing, they are extremely valuable for designing things like engines, motors, roads, and even tow truck beds, to mention a few.

To know more about distance visit:

brainly.com/question/15172156

#SPJ4

The distance between Platform 9 and 3/4 and Hogwarts at a speed of 100miles/hour is 400miles.

Distance is defined as an object's total movement with or without regard for direction. Distance can be defined as how much ground an object has covered regardless of its starting or ending point. Distance can be measured as Speed multiplied by Time.

If it takes 4 hours from Hogwarts express, at a speed of 100mi/hr to Platform 9 and 3/4 to Hogwarts, using the formula;

Distance = Speed x Time

Distance = 100 miles/hour x 4 hours

Distance = 400 miles

Therefore, the distance to platform 9 and 3/4 from Hogwarts express is 400 miles.

Learn more on distance here: https://brainly.com/question/2854969

#SPJ1

The rubber ball experiences the greater impulse from the ground, because the clay ball sticks to the ground and does not rebound. Impulse is equal to the change in momentum, and since the rubber ball rebounds and the clay ball does not, the rubber ball experiences a greater change in momentum and, therefore, a greater impulse from the ground.

The momentum  of the rubber ball is also greater than that of the clay ball, because the rubber ball rebounds and the clay ball does not. Momentum is equal to the product of mass and velocity, and the rubber ball's velocity is greater than that of the clay ball due to its rebound. Therefore, the rubber ball has greater momentum than the clay ball.

Learn more about the momentum:

https://brainly.com/question/402617

#SPJ4

True: In newton's second law, F = ma, the mass m is a gravitational mass.

What is Newton's second law?

Newton's second law of motion states that the acceleration of an object is directly proportional to the net force applied to it and inversely proportional to its mass. In equation form this can be written as F = ma, where F is the net force applied,

m is the mass of the object, and a is the acceleration of the object. This law explains that the larger the force applied, the greater the acceleration of the object.

Also, the larger the mass of the object, the lower the acceleration when the same force is applied to the object.

To learn abot more Newton's second law?

brainly.com/question/25545050

#SPJ4

The displacement in SHM is 2/3 of amplitude and the fraction of total kinetic energy is Ek = 5/9.

Let’s derive the equations needed from the first principle. The displacement for SHM with amplitude A and angular speed is:

s = A sin(ωt) ---- (1)

Differentiate the displacement to get the velocity:

v = s′ = A ωcos(ωt)

So for a mass m, the kinetic energy is:

Ek = 1/2 mv²

Ek =  1/2 m × (Aωcos(ωt) )² ---- (2)

At time t = 0 the displacement s = 0 and so all the energy is kinetic. Therefore the total energy is:

E (total) = 1/2m ×( Aωcos(0) )²

E (total) = 1/2m × (Aω)² ---- (3)

We can rephrase the kinetic energy in terms of the total energy by comparing (2) and (3):

Ek = E (total) cos²(ωt)

Using the identity  cos² (x) + sin² (x) = 1,  we can rewrite this equation as:

Ek = E total (1 − sin²) (ωt)) ---- (4)

Additionally, we are aware that potential energy U = E(total) Ek, so

U = E (total) − E (total) (1 − sin²(ωt) )

U = E (total) sin²(ωt)  ---- (5)

Now in this question, we’re given that  s = 2/3 A, so from our displacement formula  (1)  we have:

s = Asin (ωt) = 2/3 A

This is what we get for the kinetic energy when we insert it into equation (4):

Ek = E (total)(1 − (2/3)²)

Ek = 5/9 (E (total) )

Hence, the displacement in SHM is 2/3 of the amplitude, and the fraction of total kinetic energy is Ek = 5/9.

To know more about energy:

https://brainly.com/question/29733880

#SPJ4

The magnitude of the gravitational field of the planet depends on its mass and distance from the object being affected by it.

What is Gravitational field?

Gravitational field is a region of space where a mass or object experiences a force of gravity. It is caused by the presence of a massive object, such as a planet or star, which exerts a gravitational pull on other objects within its vicinity. The strength of the gravitational field is determined by the mass of the object and its distance from other objects.

The gravitational field of the planet at Point P can be calculated by using the equation,

g = G*M/r2

where G is the gravitational constant (6.67 x 10-11 Nm2/kg2), M is the mass of the planet (4 x 1026 kg), and r is the distance from the center of the planet to Point P (53,000 km).

Plugging in the values,

g = (6.67 x 10-11 Nm2/kg2) x (4 x 1026 kg) / (53,000 km)2

g = (6.67 x 10-11 Nm2/kg2) x (4 x 1026 kg) / (2.8409 x 1012 m2)

g = (6.67 x 10-11 Nm2/kg2) x (14.1636 x 1015 kg)

g = 9.5 x 10-5 N/kg

Therefore, the magnitude of the gravitational field of the planet at Point P is 9.50 x 10-5 N/kg.

To know more about gravitational field,

https://brainly.com/question/1281551

#SPJ4

Answer: The amount of Torque produced is 7.2 Nm.

Explanation:

Given:

Force applied (F) to the end of a wrench = 60 Newton

Length of wrench = 0.12 meter

To find:

Quantity of Torque produced

Solution:

The quantity of Torque produced can be calculated from the following formula:

Ƭ = r F sin(θ)  

Where,

Ƭ = Torque, r = radius, F = Force,  (θ) =  angle between F and the lever arm  

In the given question,

r = 0.12,

F= 60,

(θ)= 900           {Since the force is applied at the end of a wrench, it must be perpendicular}

Torque (Ƭ) = 0.12* 60 * sin 900

               = 7.2 m                    {sin 900 = 1}

Hence, in the given situation, 7.2 Nm Torque will be produced.

He accomplished no job. When Taylor's car broke down, he attempted to push it with 8,000 newtons of force before giving up and calling a tow truck.

The mechanical advantage is how many times a machine can multiply the force of the effort. The mechanical advantage of the machine increases when the effort force is exerted across a bigger distance.

Force multipliers are tools that lessen the force required to move an object. Force multipliers come in handy when lifting heavy objects or performing other actions that call for a lot of force.

To know more about force visit:-

https://brainly.com/question/13191643

#SPJ4

The maximum efficiency of the engine is a. 65.0%

The maximum efficiency of the heat engine is given by the Carnot efficiency, which is defined as:

Efficiency = (1 - (T cold / T hot)) * 100%

Where T cold is the temperature of the cold reservoir and T hot is the temperature of the hot reservoir.

Plugging in the given temperatures, we get:

Efficiency = (1 - (250 / 715)) * 100% = 65.0%.

So the answer is a. 65.0%.

So, using the temperatures given in the question:

Efficiency = 1 - (250 K/ 715 K) = 1 - 0.349 = 0.651 or 65.1%

Learn more about the efficiency of a heat engine here: https://brainly.com/question/16311666

#SPJ4

The coefficient of viscosity of a liquid can be determined from the motion of a bubble rising or falling through the liquid.

What is viscosity?

Viscosity basically is the measure of a fluid's resistance to flow. It is a measure of a fluid's internal friction, which is caused by the attraction of molecules in the fluid. Viscosity is an important physical property of fluids, as it affects the fluid's flow characteristics.

The equation for the coefficient of viscosity is given by:

2/9 r2 ρg/v.

where,

r = radius of bubble

ρ = density of liquid

g = acceleration due to gravity

v = velocity of bubble

Therefore, to calculate the coefficient of viscosity of a liquid, we need to know the radius of the bubble, the density of the liquid, the acceleration due to gravity, and the velocity of the bubble.

Hence, the coefficient of viscosity of liquid is 2/9 r2 ρg/v.

To know more about viscosity,

https://brainly.com/question/2568610

#SPJ4

The amount of heat transferred from the system is -720j, hence option d is the proper response. It passes through a process where its internal energy drops by 500 joules in a thermodynamic system.

The system receives 220 joules of work at the same time. A thermodynamic system's internal energy is the energy that it contains, excluding the energies that are determined by how it interacts with its environment, such as the system's overall kinetic energy of motion and its overall potential energy with regard to external force fields. The definition of heat in thermodynamics is the kind of energy that crosses a thermodynamic system's boundary.

U = Q+W

Q = U - W Q = -500 -220 = -720J

Learn more about kinetic energy here

https://brainly.com/question/26472013

#SPJ4

The time taken is 3.33 ns for light to travel 1.0 cm in a spectrophotometer.

What is time?

Time is defined as a scalar quantity that describes the progression of events in the universe. It is often considered to be the fourth dimension of spacetime, along with the three dimensions of space. Time is closely related to the concepts of causality, or the relationship between cause and effect, and is considered to be a fundamental aspect of the physical universe.

The distance light travels in 1 cm is equal to 1 cm x 10^-2 m. To find out how long it takes for light to travel this distance, we can use the formula:

time = distance / speed

Where distance is the distance light travels (1.0 cm x 10^-2 m), and speed is the speed of light in vacuum (3.0 x 108 m/s).

time = (1.0 cm x 10^-2 m) / (3.0 x 108 m/s)

time = 3.33 x 10^-10 s

To convert this time to nanoseconds (ns), we can multiply the time in seconds by 1 billion (10^9):

time = 3.33 x 10^-10 s x 10^9 ns/s

time = 3.33 ns

Therefore, the time taken is approximately 3.33 ns for light to travel 1.0 cm in a spectrophotometer.

To learn more about time from the given link:

https://brainly.com/question/26046491

#SPJ4

The velocity of ball B after the collision is 6.5 m/s.

According to the law of conservation of momentum, The overall momentum of two or more bodies acting on one another in an isolated system stays constant unless an external force is introduced.

Before collision ,

ball A of mass of 3 kg has velocity = 2 m/s.

ball B of mass of 1 kg has velocity= -4 m/s.

After the collision,

Ball A has a velocity = -1.5 m/s.

Let   Ball B has a velocity = v m/s.

Applying   law of conservation of momentum,

Total initial momentum = total final momentum

3×2 +1×-4 = 3×-1.5 + 1×v

⇒ v = 3×2 +1×-4 - 3×-1.5

⇒ v = 6.5 m/s.

hence, the velocity of ball B after the collision is 6.5 m/s.

Learn more about momentum here:

https://brainly.com/question/24030570

#SPJ1

A negatively charged object is one that has more electrons than protons.

A negative charge is present when an object has more electrons than protons. An atom has a positive charge when there are more protons than electrons in it. The charges of protons are positive while those of electrons are negative. The coulomb is used to measure charge (C).

The opposite of a charge's attraction is the opposite of its repellency. Therefore, a positive charge attracts a negative charge, whereas two negative charges repel one another. Along the boundary between the two charges, attraction or repulsion occurs.

Along the line that connects the centres of the two objects, the force is applied in that direction. Coulomb's law results in a negative value if the two charges have opposing signs. As a result, the force separating the particles is an attractive force.Coulomb's law produces a favourable outcome if the two charges have the same signs.

Therefore, the answer is 12.4 c positive.

To learn more about negative charges refer to:

https://brainly.com/question/24745720

#SPJ1

Two objects with negative charges of 6.2 nC (Coulomb) each are separated by 0.3 m. the size and direction of the force between the two charges is 3.8387038*10^12 N and toward left.

Solution:

Given :

Two objects with negative charges of 6.2 nC (nano coulomb ) each.

Separation= 0.3 m.

We will use the following Coulomb’s Law.

F = k*|q1| |q2|/r2             ∵ where k = 8.9876 × 109 N·m2

Putting the values, we get

F = 8.9876 × 109*|6.2| |6.2|/0.3^2

F=3.8387038*10^12 N

To know more about coulomb visit

https://brainly.com/question/16222732

#SPJ1

According to Newton's third law of motion the force exerted by the car on the wall and the force by the wall on the car are equal and opposite. But there will be no displacement for the wall.

Collison is a short time force acting between two objects. There are both elastic and inelastic collision. In elastic collision, the kinetic energy and momentum of the colliding system is conserved whereas in inelastic collision, the kinetic energy is not conserved.

For any type of collision, we can apply Newton's third law of motion. This law states that, for every action there is an equal and opposite reaction. Therefore, in a collision, the force exerted by each object will be equal and opposite in direction.

Therefore,  the force exerted by the car on the wall and the force by the wall on the car are equal and opposite. But there will be no displacement for the wall.

Find more on collision:

https://brainly.com/question/4322828

#SPJ1

Answer:

M1 U1 + M2 U2 = ( M1 + M2 ) V

Explanation:

they rebounce, therefore it's elastic.

Answer: The battery casing will explode

Explanation: Hydrogen gas will be released because of the heat which may cause an explosion.

The appropriate calculation is required for knowing how to find the orbital distance and the distance from the using the information.

For approximately circular orbits the orbital radius is the distance from an object in space to the body which it is orbiting. When an object orbits a body in space it rotates around that body drawing out a circle or an ellipse depending on its orbit. Earth's orbit is the path in which the Earth travels around the Sun. Earth lies at an average distance of 149.59787 million kilometers (93 million miles) from the Sun and a complete orbit occurs every 365.256 days.

To know more about the planet:

https://brainly.com/question/20725672

#SPJ4

Some harmful environmental factors can change the nucleotide sequence of a gene. UV rays, for example, can harm DNA strands.

Genetic variations arise during meiosis as a result of mutation and recombination. Chemical or biological mutagens frequently result in mutations. The genetic diversity of organisms is also altered by accidental mating.

The length at which you want to wear your hair. Scars – from your own unique accidents. The strength of your muscles depends on how much exercise you get. Piercings, whether you decide to have them or not. Mutations are the primary cause of the emergence of genetic variation.

To know more about genetic variations visit:-

https://brainly.com/question/2088746

#SPJ4

When working through these problems, think about the heat in terms of movement of the molecules of water.

Heat is transferred from the water to the surroundings --- water molecules slowing down.

Heat is transferred to the water from the surroundings --- water molecules heating up.

Heat transfer is the transfer of energy due to the difference of temperature between two different places. The main discussion in heat transfer is how the energy in heat can move places and the rate of transfer under certain conditions. Heat transfer includes the processes of inflow and outflow of heat. In industrial processes, heat transfer is used to achieve the required temperature in the industrial process and maintain the required temperature throughout the process.

Heat transfer from one object to another can occur by conduction, convection, and radiation. The determinant of heat transfer is the temperature difference. The direction of heat transfer starts from a medium with a high temperature to a medium with a lower temperature. Heat transfer can occur with a single process or multiple processes.

Learn more about heat transfer at https://brainly.com/question/13433948.

#SPJ4

Answer:

The two resistors should be connected in series.

(I assume that the question is stating the electrical power consumed by the resistors)

Explanation:

Think about the formula P = V^2 / R

For the electrical power consumed to be a minimum, we must let V be as small as possible.

For small V, between a series and a parallel connection, series is the correct connection as the combined potential difference (pd) for the two resistors is equal to the electromotive force (emf) of the battery.

However, for parallel connections, the combined pd for the two resistors is equal to twice the emf of the battery. (Each resistor will have a pd equal to the emf of the battery)

With lower total V, with the same R, power P consumed will decrease.

Divide the radius by the shear stress and the polar moment of inertia to find the shaft torque.

A device that measures shaft torque records the degree to which a shaft will twist in the presence of a specific amount of force. A shaft will twist less than one with a torque of 3 degrees than one with a torque of 5 degrees, and so on.

The rotating equivalent of force is torque. So an object will rotate with an angular acceleration in response to a net torque. A torque must be described about the rotational axis since every rotational motion has an axis of rotation. A torque is an applied force that rotates an object about its axis.

To know more about shaft torque visit:-

https://brainly.com/question/12873980

#SPJ4

In the renal medulla, a countercurrent mechanism keeps things in balance. The solution flows concurrently in the same direction. The solution flows in the opposite direction of the countercurrent flow.

Cross-current flow here, the liquids move in the opposing directions through the two tubes. One end of a tube in a single tube starts to flow a solution with a concentration of 0%, while the other end in the same tube starts to flow a solution with a concentration of 100%.

The kidneys have two countercurrent processes. They are the vasa recta and the Henle loop. The nephron's Henle's loop is a U-shaped structure. The two limbs of the vessel's two blood streams move in the opposing directions, creating countercurrents.

To know more about countercurrent

https://brainly.com/question/14949884

#SPJ4

The end product when equilibrium is reached is a mixture of water and ice at a temperature of 0°C.

Since the temperature of the water is higher than the temperature of the ice, the ice starts to melt and the temperature of the mixture decreases until it reaches the freezing point of 0°C.

The amount of water in the mixture increases due to the melting of the ice while the amount of ice decreases until all of the ice has melted and there is 1.4 kg of water in the mixture.

The heat energy that was released when the ice melted is absorbed by the water, raising its temperature to 0°C and causing it to reach equilibrium.

Learn more about equilibrium:

https://brainly.com/question/19340344

#SPJ4

A school bag with a broad strap would be easier to carry when compared with a school bag with thin strap.

Bags are used to carry loads. There are bags with two straps and bags with  one strap. Bags with one strap spread lesser area for carrying whereas bags with two straps spread more area.

The school bags with broad straps are easier to handle. This is due to the reason that the load of the bag is distributed over larger area, thereby decreasing the pressure on the shoulders. The pressure provided by smaller straps is higher ans causes irritation.

To know more about bags:

https://brainly.com/question/28763025

#SPJ4

Elena is using situational attribution because she is blaming events that were outside of her control.

Attribution is a concept used in psychology to describe how people see the reasons of their daily experiences as either external or internal. Attribution theory refers to models that explain this process. To comprehend people's behaviour, we use attribution theory to assign sentiments and intentions to them. For example, when we witness someone ranting on public transportation, we may automatically use this notion. You may blame their personality, presuming they are an angry person.

Psychologists have discovered a number of biases in the way humans ascribe causality, particularly when engaging with others. The basic attribution mistake is defined as the propensity to credit dispositional or personality-based reasons for behaviour rather than taking into account environmental variables. We have a tendency to blame individuals for their own tragedies while blaming external forces for our own. Culture bias occurs when someone assumes anything about another person's conduct based on their own cultural customs and beliefs.

To learn more about attribution theory, here

https://brainly.com/question/4438882

#SPJ4

The amplitude of the pulse is 3 m, the equation of the pulse as a function of position and time is y(x) = 6/{(x - 3t)² + 2} m and the pulse is 15 m centred at time t = 5. 00s.

y(x) = 6/(x² + 2)

v = 3 m/s

The amplitude(A) of the pulse:

When x= 0, Then y = A

Put x= 0  

y(x) = 6/(x² + 2)

y(0) = 6/(0² + 2)

y = A = 3 m

Distance travel in time t  

x = vt

x = 3 t

y(x) = 6/{(x - 3t)² + 2}

The distance covered by the pulse in the time 5 s

D = v t

D = 3 x 5  

D = 15 m

To know more about amplitude, here

https://brainly.com/question/30185219

#SPJ4

Insignificant are air resistance and rope mass. Point C on a support is where a rope of length L is fastened.

To learn more about mass refer to:

https://brainly.com/question/86444

#SPJ4

It would take 5 pounds of force, that is equal force, to stop the ball from rolling because the same amount of force must be used to stop the object.

According to Newton's third law of motion, every action which is occurring in nature has an equal as well as an opposite reaction. For instance, if a particular object A happens to exert a force on another object B, then  object B will also be exerting an equal as well as an opposite force on  object A.

If a particular ball is rolling with 5 pounds of force then the same amount of reaction will be required to bring it to rest. That is, equal force of 5 pounds will be required to stop the ball.

Hence, option D is the correct option.

To know more about force here

https://brainly.com/question/14898506

#SPJ4

According to legend, the evidence that stimulated Newton to propose the law of universal gravitation emerged from a study of the motion of the moon and other celestial or heavenly bodies.

Newton made a comparison between the moon's acceleration and that of earthly objects. Newton was able to make a significant discovery regarding the relationship between gravity and distance by assuming that gravitational forces were in charge of each.

He came to the conclusion that the force of gravitational attraction between the Earth and other objects is inversely proportional to the separation between the centres of the two objects as a result of this comparison. But there are other factors than distance that might impact how strong a gravitational force is.

To know more about gravitation:

https://brainly.com/question/12720301

#SPJ4