One single amino acid weighs 110 D a. Now, this problem is fairly simple. The way we find out, the weight of 701 amino acids is just multiplying. Ah, that number by 110. So all we have to dio is multiply 682 by 110. So our final answer will be 77,110.
What is amino acid?Amino acids are the building blocks of protein. Proteins are long chains of amino acids. Your body has thousands of different proteins that each have important jobs. Each protein has its own sequence of amino acids. The sequence makes the protein take different shapes and have different functions in your body.You can think of amino acids like the letters of the alphabet. When you combine letters in various ways, you make different words. The same goes for amino acids — when you combine them in various ways, you make different proteins.Amino acids are molecules used by all living things to make proteins. Your body needs 20 different amino acids to function correctly. Nine of these amino acids are called essential amino acids. Essential amino acids must be consumed through the food you eat. Essential amino acids can be found in a variety of foods, including beef, eggs and dairy.To learn more about molecules refer to:
https://brainly.com/question/475709
#SPJ4
Please help i’ll give brainliest!
How many grams of nitric acid would you yield from 41. 3 g of aluminum nitrate?
To determine the mass of nitric acid yielded from 41.3 g of aluminum nitrate, the molar ratio between aluminum nitrate and nitric acid is needed. By calculating the molar mass of aluminum nitrate and using stoichiometry, the mass of nitric acid can be determined.
The molar ratio between aluminum nitrate (Al(NO3)3) and nitric acid (HNO3) is 1:3. This means that for every 1 mole of aluminum nitrate, 3 moles of nitric acid are produced.
To calculate the mass of nitric acid, we first need to determine the number of moles of aluminum nitrate. This can be done by dividing the given mass of aluminum nitrate by its molar mass. The molar mass of aluminum nitrate can be calculated by summing the atomic masses of its constituent elements.
Once the number of moles of aluminum nitrate is known, we can use the molar ratio to determine the number of moles of nitric acid. Multiplying this by the molar mass of nitric acid will give us the mass of nitric acid yielded.
Therefore, by following the steps described above and using the appropriate atomic masses and molar ratios, the mass of nitric acid yielded from 41.3 g of aluminum nitrate can be calculated.
Learn more about molar ratio here:
https://brainly.com/question/30930200
#SPJ11
Aspirin is a weakly acidic drug with a pKa of 3.5. The pH of the gastric fluid is 1.5 and the pH of intestinal fluid is 5.5. Absorption of aspirin will most likely take place:
a. equally well in both the stomach and the intestine.
b. in the stomach, where mainly ionized species of aspirin are present.
c. in the stomach, where mainly nonionized species of aspirin are present.
d. in the intestine, where mainly ionized species of aspirin are present.
e. in the intestine, where mainly nonionized species of aspirin are present.
The pKa is the pH at which the ionization of the drug is equal to 50%. Therefore, at a pH lower than 3.5, the majority of the aspirin molecules will exist in their nonionized form, while at a pH higher than 3.5, the majority of the aspirin molecules will exist in their ionized form.
Considering the above information, we can deduce that the absorption of aspirin will take place mainly in the intestine, where the pH is closer to the pKa of aspirin, allowing for a greater proportion of nonionized species of aspirin to be present. This is because nonionized species of aspirin can pass through the cell membranes more easily than ionized species of aspirin, which are charged and therefore have a harder time crossing the cell membranes.In contrast, the stomach's highly acidic environment will result in most of the aspirin molecules being ionized, which will make it harder for the drug to be absorbed through the cell membranes. Therefore, it is less likely for aspirin to be absorbed in the stomach.In conclusion, the absorption of aspirin will most likely take place in the intestine, where mainly nonionized species of aspirin are present. This is due to the fact that nonionized species of aspirin can more easily cross cell membranes than ionized species of aspirin, and the pH of the intestine is closer to the pKa of aspirin, resulting in a higher proportion of nonionized species of the drug being present.For such more question on ionization
https://brainly.com/question/20658080
#SPJ11
Aspirin will likely be absorbed in the small intestine, where its weakly acidic nature will allow it to become ionized and more soluble due to the higher pH (5.5) compared to the stomach (pH 1.5).
Aspirin is a weakly acidic drug, which means that it exists in both ionized and non-ionized forms depending on the pH of the surrounding environment. The pKa of aspirin is 3.5, which is the pH at which half of the drug molecules are ionized and half are non-ionized. In the highly acidic environment of the stomach (pH 1.5), aspirin will mostly exist in its non-ionized form, which is less soluble and less easily absorbed. However, as the aspirin moves into the small intestine, where the pH is higher (around 5.5), more of the drug will become ionized and therefore more soluble, allowing for better absorption. Therefore, aspirin is most likely to be absorbed in the small intestine.
Learn more about Aspirin here;
https://brainly.com/question/23878261
#SPJ11
Arrange the following compounds in order of decreasing acidity: Rank from most acidic to least acidic: To rank items a5 equivalent; overlap them: Reset Help CH3C = CH CH,COOH CHzNHz CH,CHz CH;SOzH CHzSH CH;OH Most acidic Least acidic The correct ranking cannot be determined
The correct ranking cannot be determined. to determine the acidity of a compound, we need to compare the stability of the corresponding conjugate bases. However, the given compounds belong to different functional groups, and their corresponding conjugate bases differ in structure and stability.
Therefore, we cannot directly compare their acidities. Additionally, the position of substituents in the molecule can affect the acidity of the compound, making it difficult to determine a clear ranking. Therefore, we cannot establish a definitive ranking of the given compounds based on their acidity.
Learn more about acidity here:
https://brainly.com/question/14072179
#SPJ11
(3) cite two examples of beneficial galvanic corrosion (i.e., sacrificial anode used to galvanically protect a metal or alloy).
Two examples of beneficial galvanic corrosion (i.e., sacrificial anode used to galvanically protect a metal or alloy) involving the use of sacrificial anodes to protect metals or alloys such as cathodic protection of steel structures and protection of aluminum boat hulls
Cathodic protection of steel structures, steel structures, such as pipelines, bridges, and ships, are often exposed to corrosive environments. In order to prevent steel corrosion, sacrificial anodes made of a more active metal (e.g., zinc or magnesium) are attached to the steel. This creates a galvanic cell, with the anode corroding preferentially and protecting the steel structure from corrosion, this technique helps extend the lifespan of steel structures and reduce maintenance costs.
Aluminum boat hulls are prone to corrosion in saltwater environments, to protect the aluminum, sacrificial anodes made of zinc or magnesium are attached to the hull. In this case, the sacrificial anodes corrode preferentially, preventing the aluminum hull from corroding, this method of galvanic corrosion protection helps maintain the structural integrity of the boat hull, enhancing safety and reducing the need for repairs. So therefore in both examples cathodic protection of steel structures and protection of aluminum boat hulls, the sacrificial anodes provide protection by corroding in place of the metal or alloy they are protecting. This beneficial application of galvanic corrosion helps extend the lifespan of structures and reduce maintenance expenses.
To learn more about galvanic cell here:
https://brainly.com/question/29784730
#SPJ11
what is the volume of a 1.95 moles sample of gas if the pressure is 844 mmHg and the temperature is 61.6 degrees celsius
Answer:
48.23 liters.
Explanation:
To calculate the volume of a gas, we can use the ideal gas law equation:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the absolute temperature.
First, we need to convert the temperature to Kelvin by adding 273.15:
T = 61.6°C + 273.15 = 334.75 K
Next, we can substitute the given values into the equation and solve for V:
V = (nRT) / P
V = (1.95 mol * 0.08206 L atm mol^-1 K^-1 * 334.75 K) / (844 mmHg * 1 atm / 760 mmHg)
V ≈ 48.23 L
Therefore, the volume of the gas is approximately 48.23 liters.
A 0.033M solution of a weak acid (HA) has a pH of 4.11. What is the Ka of the acid
The concentration of hydrogen ions, conjugate base, and weak acid must be taken into account, as well as the degree of dissociation of the acid. In this case, the Ka of the weak acid is [tex]1.89 \times 10^{-6.[/tex]
To determine the Ka of a weak acid from its pH, it is necessary to use the equation for the acid dissociation constant:
Ka = [H+][A-]/[HA]
where [H+] is the concentration of the hydrogen ions, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.
In this problem, the pH of the solution is 4.11, which means that the concentration of [H+] can be calculated as follows:
pH = -log[H+]
4.11 = -log[H+]
[tex][H+] = 7.94 \times 10^{-5} M[/tex]
Since the acid is weak, it does not completely dissociate, so the concentration of [A-] can be assumed to be equal to [H+], and the concentration of [HA] is given as 0.033 M. Thus, the equation for Ka can be simplified as:
[tex]Ka = [H+]^2 / [HA]\\Ka = (7.94 \times 10^{-5})^{2} / 0.033\\Ka = 1.89 \times 10^{-6[/tex]
Therefore, the Ka of the weak acid is [tex]1.89 \times 10^{-6.[/tex]
For more question on degree of dissociation visit:
https://brainly.com/question/29908901
#SPJ11
For 6 points, a 0.50 liter solution of 0.10 M HF titrated to the half way point with a 0.10 M solution of NaOH. Determine the pH of the half way point. Use two significant figures in your final answer.
The pH at the half-way point is 3.17. The equation for the neutralization reaction between HF and NaOH: HF + NaOH -> NaF + H2O
At the half way point, half of the HF has reacted with NaOH, leaving half of it still in solution. This means that the concentration of HF has been reduced by half, so it is now 0.05 M. The reaction between HF and NaOH produces NaF and water, but NaF is a salt that does not affect the pH of the solution. So, we can focus on the remaining HF and the water.
HF + H2O -> H3O+ + F-
To determine the pH of the solution at the half way point, we need to calculate the concentration of H3O+ ions. We can use the equilibrium constant expression for the reaction above: Kw = [H3O+][OH-] = 1.0 x 10^-14
moles NaOH = concentration x volume = 0.10 M x 0.25 L = 0.025 mol
Kw = [H3O+][F-] / [HF]
1.0 x 10^-14 = [H3O+][0.05 M / 2] / 0.20 M
Solving for [H3O+] gives: [H3O+] = 2.5 x 10^-4 M
Finally, we can calculate the pH using the definition of pH:
pH = -log[H3O+] = -log(2.5 x 10^-4) = 3.60
The pH of the solution at the half way point of the titration is 3.60 (rounded to two significant figures).
pH = pKa + log ([A-]/[HA])
The pKa of HF. The Ka of HF is 6.8 x 10^-4, so the pKa is:
pKa = -log(Ka) = -log(6.8 x 10^-4) = 3.17
At the half-way point, [A-] = [HA], so the ratio [A-]/[HA] = 1. The log(1) is 0, so: pH = pKa + log(1) = 3.17 + 0 = 3.17
To know more about neutralization visit:-
https://brainly.com/question/15347368
#SPJ11
reaction of nickel nitrate hexahydrate with ki and pph3
Ni(NO3)2·6H2O + 2KI + 3PPh3 → Ni(PPh3)3I2 + 6H2O + 2KNO3
The reaction of nickel nitrate hexahydrate with KI and PPh3 results in the formation of a nickel(II) complex with PPh3 b.
The reaction can be represented by the following balanced equation:
Ni(NO3)2·6H2O + 2KI + 3PPh3 → Ni(PPh3)3I2 + 6H2O + 2KNO3
In this reaction, the KI serves as a source of iodide ions (I-) which react with the nickel(II) ions (Ni2+) from nickel nitrate hexahydrate. The PPh3 (triphenylphosphine) acts as a ligand and coordinates with the nickel(II) ions, forming a coordination complex. The resulting complex is Ni(PPh3)3I2, where three PPh3 ligands are attached to the nickel atom along with two iodide ions. The reaction is typically carried out in a suitable solvent, such as ethanol or acetonitrile.
This reaction is an example of a coordination reaction, where ligands bind to a central metal ion to form a complex. The presence of PPh3 ligands enhances the stability and reactivity of the resulting nickel(II) complex. The reaction conditions and stoichiometry can be adjusted to control the formation and properties of the complex.
Know more about Ligands here:
https://brainly.com/question/31836087
#SPJ11
calculation of cu2 usiing measured cell potentialand the nernst equation
To calculate the concentration of Cu²⁺ in a solution using a measured cell potential and the Nernst equation, we need to know the standard reduction potential of the Cu²⁺/Cu couple, as well as the measured cell potential and the concentrations of the other species in the cell.
Assuming the standard reduction potential of the Cu²⁺/Cu couple is +0.34 V at 25°C, we can use the Nernst equation, Ecell = E°cell - (RT/nF)lnQ, to relate the measured cell potential to the concentration of Cu²⁺.
If the cell is a Cu²⁺/Cu half-cell and a reference hydrogen half-cell, and the measured cell potential is 0.62 V at 25°C, then we can write:
0.62 V = 0.34 V - (0.0257 V/K)(298 K)/(2)(96,485 C/mol)ln[Cu²⁺]
Solving for [Cu²⁺], we get:
[Cu²⁺] = 1.5 x 10⁻⁴ M
Therefore, the concentration of Cu²⁺ in the solution is approximately 1.5 x 10⁻⁴ M. Learn more about electrochemistry and the Nernst equation at
https://brainly.com/question/13043546
#SPJ11
For a linear molecule of polyethylene of molar mass 119,980 g mol^-1 calculate: (a) the contour length of the molecule, (b) the end-to-end distance in the fully-extended molecule, and (c) the root-mean-square end-to-end distance according to the valence angle model. In the calculations, end groups can be neglected and it may be assumed that the C-C bonds are of length 0.154 nm and that the valence angles are 109.5 degree Comment upon the values obtained. Indicate, giving your reasoning, which of the very large number of possible conformations of the molecule is the most stable.
a) This gives contour length of 1.438μm.
b) This gives an end-to-end distance of 0.027 μm.
c) This gives a value of 0.016 μm.
Which conformation of the molecule is the most stable based on these values and why?(a) The contour length of the linear polyethylene molecule can be calculated by multiplying the number of repeating units in the molecule by the length of each unit. The molar mass of the molecule is given as 119,980 g/mol, and the molar mass of one repeating unit of polyethylene is 28.05 g/mol. Therefore, the number of repeating units in the molecule is 4,278. The length of each repeating unit can be calculated as the sum of the lengths of the two C-C bonds and the angle between them, using the law of cosines. This gives a contour length of 1.438 μm.
(b) The end-to-end distance in the fully-extended molecule can be calculated as the contour length divided by the square root of the number of repeating units. This gives an end-to-end distance of 0.027 μm.
(c) The root-mean-square end-to-end distance according to the valence angle model can be calculated as (3/5)^(1/2) times the end-to-end distance. This gives a value of 0.016 μm.
Based on the values obtained, it can be concluded that the linear polyethylene molecule is highly elongated. Among the very large number of possible conformations, the fully-extended conformation is likely the most stable, since it allows for maximum separation between the repeating units, thereby minimizing steric interactions.
Learn more about Polyethylene.
brainly.com/question/14553941
#SPJ11
Identify the compound with ionic bonding. a. S b. LiBr c. H2O d. Na e. He
The compound with ionic bonding is LiBr (b), which consists of a lithium ion (Li⁺) and a bromide ion (Br⁻) held together by electrostatic attraction.
Ionic bonding occurs between a metal and a non-metal, where the metal loses one or more electrons to become a cation (positively charged ion) and the non-metal gains one or more electrons to become an anion (negatively charged ion). The resulting oppositely charged ions are held together by electrostatic attraction, forming an ionic compound.
In the case of LiBr, lithium (Li) is a metal that easily loses one electron to form a Li⁺ ion, while bromine (Br) is a non-metal that readily gains one electron to form a Br⁻ ion. The resulting Li⁺ and Br⁻ ions are strongly attracted to each other by their opposite charges, forming the ionic compound LiBr.
In contrast, compounds such as S (a), H₂O (c), Na (d), and He (e) do not have ionic bonding. S and Na are both elements and do not form ionic compounds with themselves. H₂O is a covalent compound that shares electrons between its atoms, while He is a noble gas that exists as a single atom and does not form chemical bonds with other atoms.
learn more about ionic bonding here:
https://brainly.com/question/12663276
#SPJ11
a 0.549 m solution of a weak base has a ph of 10.17 . what is the base hydrolysis constant, b , for the weak base?
To find the base hydrolysis constant, b, for the weak base, we first need to use the pH value to calculate the pOH of the solution. Since pH + pOH = 14 at 25°C, we can subtract the pH from 14 to find the pOH:
pOH = 14 - 10.17 = 3.83
We can use the pOH to calculate the hydroxide ion concentration, [OH⁻], in the solution. Since pOH = -log[OH⁻], we can rearrange the equation to solve for [OH⁻]:
[OH⁻] = 10^-pOH = 10^-3.83 = 6.34 x 10^-4 M
Since the solution contains a weak base, it will undergo hydrolysis in water to produce hydroxide ions and its conjugate acid. The equilibrium constant for this reaction is called the base hydrolysis constant, b, and is defined as:
b = [OH⁻][BH⁺]/[B]
where BH⁺ is the conjugate acid of the weak base and B is the concentration of the weak base. Since the weak base is the only source of hydroxide ions in the solution, we can assume that [OH⁻] = [BH⁺]. Therefore, we can simplify the equation to:
b = [OH-]² / [B] = (6.34 x 10⁻⁴)² / 0.549
b = 5.99 x 10⁻⁷
So the base hydrolysis constant, b, for the weak base is 5.99 x 10⁻⁷.
for more questions on base hydrolysis constant: https://brainly.com/question/31838919
#SPJ11
This is the term used to characterize a group on a benzene that makes it more reactive.a. Aromaticb. Electron donating groupc. Electron Withdrawing groupd. Aliphatic
The term used to characterize a group on a benzene that makes it more reactive is "Electron Withdrawing Group" (EWG).
EWGs are typically characterized by their ability to withdraw electron density from the ring, which can make the benzene ring more susceptible to electrophilic attack.
Examples of EWGs include nitro (-NO2), carbonyl (-C=O), and cyano (-CN) groups.
To know more about refer benzene here
brainly.com/question/14525517#
#SPJ11
all acid-base reactions in water are essentially the same reaction. explain why this is the case and write down the reaction involved.
All acid-base reactions in water involve the transfer of a proton (H+) from the acid to the base, forming a conjugate base and a conjugate acid. This is because water can act as both an acid and a base, and the proton transfer reaction follows the same general mechanism regardless of the specific acid or base involved. The reaction involved can be represented as:
acid + base → conjugate base + conjugate acid
For example, in the reaction between hydrochloric acid (HCl) and sodium hydroxide (NaOH), the H+ ion from HCl is transferred to the OH- ion from NaOH, forming water (H2O) and the conjugate base of HCl (Cl-) and the conjugate acid of NaOH (Na+). This reaction can be generalized to any acid-base reaction in water.
Learn more about mechanism here:
https://brainly.com/question/20885658
#SPJ11
Calculate the [OH-] of each of the following solutions at 25°C. Identify each solution as neutral, acidic, or basic. Also calculate the pH and pOH of each of these solutions. a. [H+] = 1.0 x 10-7 M [OH-]= M The solution is pH = pOH = b. H+] = 8.3 x 10-16 M [OH]= M The solution is pH pOH =
To calculate the [OH-] of the given solutions, we can use the formula [H+][OH-] = 1.0 x 10^-14 (at 25°C). Using this formula, we can determine the [OH-] for each solution:
a. [H+] = 1.0 x 10^-7 M
[OH-] = 1.0 x 10^-14 / 1.0 x 10^-7 = 1.0 x 10^-7 M
Since [H+] and [OH-] are equal, the solution is neutral.
pH = -log[H+] = -log(1.0 x 10^-7) = 7
pOH = -log[OH-] = -log(1.0 x 10^-7) = 7
b. [H+] = 8.3 x 10^-16 M
[OH-] = 1.0 x 10^-14 / 8.3 x 10^-16 = 1.2 x 10^-9 M
Since [H+] < [OH-], the solution is basic.
pH = -log[H+] = -log(8.3 x 10^-16) = 15.08
pOH = -log[OH-] = -log(1.2 x 10^-9) = 8.92
In summary, the [OH-] of the first solution is 1.0 x 10^-7 M and it is neutral with a pH and pOH of 7. The [OH-] of the second solution is 1.2 x 10^-9 M and it is basic with a pH of 15.08 and a pOH of 8.92.
To know more about solutions visit:
https://brainly.com/question/30665317
#SPJ11
Select the best synthetic scheme to form octanoic acid from 1-heptene. O 1) (a) BHZ/THF (b) H2O2/NaOH 2) HBr 3) Mg, ether 4) (a) CO, (b) H,0+ 01) HBO 2) Mg, ether 3) (a) CO, (b) H, 0+ 1) 4,0+ 2) K, C1,07, H,SO 1) (a) BH/THF (b) H2O,/NaOH 2) K, Cr,0,,H, SO4
The best synthetic scheme to form octanoic acid from 1-heptene is as follows:
1) (a) BH₃/THF (b) H₂O₂/NaOH
2) HBr (Hydrogen Bromide)
3) Mg, ether
4) (a) CO, (b) H₂O⁺
In this scheme:
1. 1 - heptene is first converted to 1-heptyl alcohol using hydroboration - oxidation (BH₃/THF followed by H₂O₂/NaOH).
2. Then, the alcohol is converted to 1 - bromoheptane by reacting it with HBr.
3. The Grignard reagent, 1-heptylmagnesium bromide, is formed by reacting 1-bromoheptane with Mg in an ether solvent.
4. Finally, the Grignard reagent is reacted with carbon monoxide (CO) followed by the addition of H₂O⁺ (acidic workup) to form octanoic acid.
Learn more about octanoic acid : https://brainly.com/question/15676614
#SPJ11
Calculate the mass of Na2O needed to release 105 kJ of heat energy according to the following reaction:
Na2O (s) + 2HI (g) → 2NaI (s) + H2O (l) ΔH = -502 kJ
13. 0 g
155 g
97. 4 g
24. 8 g
The mass of Na2O needed to release 105 kJ of heat energy is 97.4 g.
In the given reaction, the enthalpy change is -502 kJ when 1 mole of Na2O reacts with 2 moles of HI to produce 2 moles of NaI and 1 mole of H2O.
Using this information, we can calculate the enthalpy change for the given amount of heat energy as follows:
-502 kJ --> 1 mole Na2O
-105 kJ --> (105/502) mole Na2O [Using stoichiometry]
Therefore, the moles of Na2O required to release 105 kJ of heat energy is (105/502) mole. The molar mass of Na2O is 61.98 g/mol, so the mass of Na2O required can be calculated as:
Mass of Na2O = (105/502) mol x 61.98 g/mol = 97.4 g
Hence, the mass of Na2O needed to release 105 kJ of heat energy is 97.4 g.
Learn more about heat energy here.
https://brainly.com/questions/29210982
#SPJ11
which ihas the highest boiling point water? a) ticl4, b) ether, c) ethanol, d) acetone
Among the given options, water (H₂O) has the highest boiling point.
The boiling point of a liquid is the temperature at which its vapor pressure is equal to the pressure of the gas above it. It depends on the intermolecular forces between its molecules. The stronger the intermolecular forces, the higher the boiling point .Among the given options, water (H₂O) has the highest boiling point.
TiCl₄ (titanium tetrachloride) has a boiling point of 136.4°C
Ether (diethyl ether) has a boiling point of 34.6°C
Ethanol (C₂H₅OH) has a boiling point of 78.4°C
Acetone (CH₃COCH₃) has a boiling point of 56.5°C
Therefore, water has the highest boiling point among the given options. Water boils at 100°C at standard atmospheric pressure (1 atm).
for more questions on boiling point: https://brainly.com/question/30006331
#SPJ11
define a relation t from to as follows. for all real numbers to as means that . is t a function? explain
Based on the given definition of relation t, we can see that each element in A is mapped to a unique element in B. Therefore, t is a function.
The relation t from set A to set B is defined as follows: for all real numbers in set A, t maps each element in A to a unique element in B such that the value of the element in B depends solely on the value of the element in A.
To determine whether t is a function, we need to check if each element in A has a unique mapping to an element in B. If every element in A is mapped to a unique element in B, then t is a function. However, if there exists at least one element in A that is mapped to more than one element in B, then t is not a function. so t is function.
An object that can be counted, measured, or given a name is a number. As an illustration, the numbers are 1, 2, 56, etc.
It follows that:
The value is 1/8.
The fact is,
Positive, negative, fractional, square-root, and whole numbers are all represented on the number line as real numbers.
Rational numbers are the quotients or fractions of two integers.
Irrational numbers are decimal numbers that never end (without repetition). They are not able to be stated as a fraction of two integers. 41, 97, and 15 are three examples of irrational numbers.
Learn more about numbers here
https://brainly.com/question/10547079
#SPJ11
determine the mass of potassium in 34.8 g of ki .
The mass of Potassium in 34.8 g of Potassium Iodide is 8.20g.
To determine the mass of potassium (K) in 34.8 g of potassium iodide (KI), we can use the concept of molar mass and stoichiometry.
First, calculate the molar mass of KI, which is the sum of the molar masses of potassium (K) and iodine (I). Potassium has a molar mass of 39.10 g/mol, and iodine has a molar mass of 126.90 g/mol. The molar mass of KI is 39.10 g/mol + 126.90 g/mol = 166.00 g/mol.
Next, we can find the moles of KI in the given mass. Moles of KI = (34.8 g) / (166.00 g/mol) = 0.2096 moles.
Since the ratio of potassium to iodide in KI is 1:1, there are also 0.2096 moles of potassium present. Now, we can find the mass of potassium by multiplying the moles of potassium by its molar mass:
Mass of potassium (K) = (0.2096 moles) x (39.10 g/mol) = 8.1976 g
So, there are approximately 8.20 g of potassium in 34.8 g of potassium iodide (KI).
Know more about Molar mass here:
https://brainly.com/question/22997914
#SPJ11
D
Question 1
You find an old metal ball deep in the woods one day. You determine it has a radius of 2cm and a
mass of 267.4794 grams. Calculate its volume then calculate its density to determine which type of
metal it is.
O Aluminum
O Titanium
2 pts
OZinc
O Tin
O Cast Iron
O Mild Steel
O Iron
O Stainless Steel
O Brass
O Copper
O Silver
O Lead
O Mercury
O Gold
O Tungsten
O Platinum
1. The volume of the metal ball is 33.49 cm³
2. The density of the metal ball is 7.99 g/cm³
3. The metal ball is iron
How do i determine the identity of the metal ball?We can obtain the identity of the metal by doing the following:
1. Determine the volume
The volume of the metal ball can be obtain as follow:
Radius of metal ball (r) = 2 cmPi (π) = 3.14Volume of metal ball (V) =?V = 4/3πr³
V = (4/3) × 3.14 × 2³
Volume = 33.49 cm³
2. Determine the density
The density can be obtain as follow:
Volume of metal ball = 33.49 cm³ Mass of metal ball = 267.4794 gDensity of metal ball = ?Density = mass / volume
Density of metal ball = 267.4794 / 33.49
Density of metal ball = 7.99 g/cm³
3. Determine the identity
From the above, we can see that the density of metal ball is 7.99 g/cm³.
Thus, the metal ball is iron
Learn more about density:
https://brainly.com/question/13275926
#SPJ1
aldehydes and ketones may be reduced to a) alcohols. b) acids. c) alkanes. d) esters. e) ethers
Aldehydes and ketones can be reduced to (a) alcohols, but not to acids, alkanes, esters, or ethers.
Aldehydes and ketones are organic compounds that contain carbonyl groups (C=O).
These functional groups can be reduced to form alcohols through various reduction reactions, such as catalytic hydrogenation or using reducing agents like sodium borohydride or lithium aluminum hydride.
However, aldehydes and ketones cannot be reduced to form acids, alkanes, esters, or ethers.
Acids are formed by the oxidation of alcohols, while alkanes are formed by the reduction of alkyl halides.
Esters and ethers are formed by the reaction of alcohols with carboxylic acids and alkyl halides, respectively. Therefore, aldehydes and ketones can only be reduced to alcohols.
For more such questions on Aldehydes, click on:
https://brainly.com/question/17101347
#SPJ11
A) Aldehydes and ketones can be reduced to form alcohols, through the addition of hydrogen in the presence of a reducing agent, such as sodium borohydride or lithium aluminum hydride.
Aldehydes and ketones can undergo reduction reactions, where they gain electrons and become alcohols. This reaction is typically carried out in the presence of a reducing agent, such as sodium borohydride or lithium aluminum hydride, which supplies the necessary electrons. The reducing agent is often dissolved in a solvent such as ethanol or diethyl ether, and the aldehyde or ketone is added to the solution. The reaction is typically exothermic and can be carried out under reflux. During the reaction, the carbonyl group is reduced to an alcohol, and the reducing agent is oxidized. The resulting alcohol can be isolated by filtration or distillation, depending on the specific reaction conditions.
learn more about alcohol here:
https://brainly.com/question/14229343
#SPJ11
how many liters of h2 gas at stp are needed to completely saturate 100 g of glyceryl tripalmitoleate (tripalmitolein)?
Approximately 159.2 liters of H2 gas at STP are needed to completely saturate 100 g of glyceryl tripalmitolein.
The molar mass of tripalmitolein is 806.14 g/mol. Therefore, 100 g of tripalmitolein is equal to 0.124 mol. Each mole of tripalmitolein reacts with 3 moles of H2 to form 3 moles of glycerol and 3 moles of palmitoleic acid. Thus, to completely saturate 0.124 mol of tripalmitolein, 0.372 mol of H2 is required. At STP, 1 mol of gas occupies 22.4 L of volume. Therefore, 0.372 mol of H2 gas occupies 8.34 L of volume. Hence, approximately 159.2 liters of H2 gas at STP are needed to completely saturate 100 g of tripalmitolein. 159.2 liters of H2 gas at STP are needed to saturate 100 g of tripalmitolein, which requires 0.372 mol of H2 gas.
learn more about tripalmitolein here:
https://brainly.com/question/17134991
#SPJ11
how many kilograms of co₂ equivalents are emitted in the production and post-farmgate processing of 23 kg of pork?
Answer:The carbon footprint of pork varies depending on the location and the production methods used. On average, the carbon footprint of pork production is estimated to be around 3.8 kg CO2e per kg of pork.
So for 23 kg of pork, the total carbon footprint would be:
3.8 kg CO2e/kg * 23 kg = 87.4 kg CO2e
Therefore, approximately 87.4 kg of CO2 equivalents are emitted in the production and post-farmgate processing of 23 kg of pork.
learn more about equivalents
https://brainly.com/question/25197597?referrer=searchResults
#SPJ11
the maximum amount of energy produced by a reaction that can be theoretically harnesses as work is equal to
The maximum amount of energy produced by a reaction that can be theoretically harnessed as work is equal to the Gibbs free energy change (ΔG) of the reaction.
This is the energy difference between the reactants and products at constant pressure and temperature.
ΔG represents the amount of energy that is available to do work. If ΔG is negative, the reaction is exergonic and energy is released, meaning it can be used to perform work. If ΔG is positive, the reaction is endergonic and energy must be supplied in order for the reaction to occur.
It is important to note that the maximum amount of energy that can be harnessed as work is always less than the total energy released by the reaction. This is due to the Second Law of Thermodynamics, which states that in any energy transfer or transformation, some energy will be lost as unusable energy (usually heat) that cannot be converted to work.
Therefore, it is essential to consider the efficiency of energy conversion when designing systems that aim to harness energy from chemical reactions. This is especially important in sustainable energy production, where maximizing efficiency is crucial for reducing waste and minimizing environmental impact.
To learn more about Gibbs free energy change, refer:-
https://brainly.com/question/4002787
#SPJ11
consider the reaction: 2no2(g) n2o4(g) for which (at 25°c) ∆h° = -56.8 kj and ∆s° = -175 j/k. mark the statements which are correct.
To determine the correct statements about the reaction 2NO2(g) ⇌ N2O4(g), given ∆H° and ∆S°, we need to consider the relationship between enthalpy (∆H), entropy (∆S), and the spontaneity of a reaction.
1. ∆H° = -56.8 kJ: This indicates that the reaction is exothermic because ∆H° is negative. Exothermic reactions release energy to the surroundings.
2. ∆S° = -175 J/K: This indicates a decrease in entropy (∆S° < 0). The reaction leads to a decrease in disorder or randomness.
3. ∆G° = ∆H° - T∆S°: The Gibbs free energy (∆G°) of a reaction determines its spontaneity. If ∆G° is negative, the reaction is spontaneous at the given temperature.
Given the values of ∆H° and ∆S°, we can't directly determine the spontaneity of the reaction without knowing the temperature (T). The statement about the spontaneity of the reaction cannot be marked as correct or incorrect based on the given information.
Therefore, the correct statement is:
- ∆H° = -56.8 kJ, indicating the reaction is exothermic.
Learn more about enthalpy, entropy, and spontaneity of reactions here:
https://brainly.com/question/13793036?referrer=searchResults
#SPJ11
Draw a complete structure for a molecule with the molecular formula C2H3CL. • Explicitly draw all H atoms. • In cases where there is more than one answer, just draw one.
The molecular formula C2H3CL indicates that the molecule has 2 carbon atoms, 3 hydrogen atoms, and 1 chlorine atom.
To draw the structure, we start with the carbon atoms and connect them with a single bond. We then add the hydrogen atoms to satisfy the valency of each carbon atom. One carbon atom must have 2 hydrogen atoms attached to it, while the other carbon atom only needs one hydrogen atom.
Now we have C2H4, which is ethene. However, the presence of the chlorine atom means that one of the hydrogen atoms must be replaced with a chlorine atom. We can place the chlorine atom on either carbon atom, but let's choose the carbon atom that only has one hydrogen atom attached to it.
So the final structure is:
H H
| |
C=C
| |
Cl H
For more such questions on atoms
https://brainly.com/question/6258301
#SPJ11
One possible molecule with the molecular formula C2H3Cl is vinyl chloride (CH2=CHCl), which has two carbon atoms double-bonded to each other and single-bonded to one chlorine atom and one hydrogen atom each.
The molecular formula C2H3Cl indicates that the molecule contains two carbon atoms, three hydrogen atoms, and one chlorine atom. To draw the structure, we can start by placing the atoms in a way that satisfies the valency of each element. Carbon atoms can form up to four bonds, while hydrogen atoms can form only one bond, and chlorine atoms can form one or two bonds.
One possible molecule that satisfies these criteria is vinyl chloride (CH2=CHCl), which has two carbon atoms double-bonded to each other and single-bonded to one chlorine atom and one hydrogen atom each. The double bond between the two carbon atoms means that they share two pairs of electrons, while the single bonds between carbon and chlorine, and between carbon and hydrogen, mean that they share one pair of electrons each.
To make the structure more clear, we can draw the molecule in a way that shows the spatial arrangement of the atoms. In this case, the molecule has a linear shape, with the two carbon atoms and the chlorine atom lying in the same plane and the hydrogen atoms pointing outwards.
learn more about molecule here:
https://brainly.com/question/19556990
#SPJ11
Chlorine gas, Cl2, and fluorine gas, F2, react at 2500 K to produce an equilibrium with CIF. The equilibrium constant for this reaction at 2500K, Kc = 25. A vessel is charged with 0.364 M chlorine, 0.364 M of fluorine, and 2.397 M CIF and allowed to reach equilibrium. i) write a balanced equation for this reaction. ii) Write an expression for the reaction quotient (Qc). iii) What are the equilibrium concentrations for this reaction? Show your work and use the methods I showed you in class.
When, chlorine and fluorine gas will react at 2500k to produce an equilibrium with CIF then, the balanced equation is; Cl₂(g) + F₂(g) ⇌ 2CIF(g), the expression for the reaction quotient is; Qc = [CIF]² / [Cl₂][F₂], and the equilibrium concentrations for chlorine is -0.688 M, for fluorine -0.688 M, and for chlorine fluoride is 3.449 M.
The balanced equation for the reaction is;
Cl₂(g) + F₂(g) ⇌ 2CIF(g)
The expression for the reaction quotient Qc will be;
Qc = [CIF]² / [Cl₂][F₂]
To find the equilibrium concentrations, we can use the ICE table;
Initial concentrations: [Cl₂] = 0.364 M
[F₂] = 0.364 M
[CIF] = 2.397 M
Change: -2x -2x +2x
Equilibrium concentrations; [Cl₂] = 0.364 - 2x M
[F₂] = 0.364 - 2x M
[CIF] = 2.397 + 2x M
At equilibrium, Qc = Kc;
25 = ([CIF]² / [Cl₂][F₂])
Substituting the equilibrium concentrations into this expression, we have;
25 = ((2.397 + 2x)² / (0.364 - 2x)(0.364 - 2x))
Simplifying and rearranging, we get a quadratic equation;
4x² - 14.518x + 4.1126 = 0
Solving for x using quadratic formula, we get;
x = 0.526 M
Therefore, the equilibrium concentrations are;
[Cl₂] = 0.364 - 2(0.526) = -0.688 M (this negative value indicates that all of the chlorine has reacted)
[F₂] = 0.364 - 2(0.526) = -0.688 M (this negative value indicates that all of the fluorine has reacted)
[CIF] = 2.397 + 2(0.526) = 3.449 M
Note that the negative concentrations for Cl₂ and F₂ simply indicate that all of the reactants have been consumed to form the product CIF at equilibrium.
To know more about equilibrium concentrations here
https://brainly.com/question/16645766
#SPJ4
If I react 100g of zinc with 120 grams of HCL what will
Be the limiting reagent
In the reaction between 100g of zinc and 120g of HCl, zinc is the limiting reagent, meaning it will be completely consumed while HCl will be in excess.
To determine the limiting reagent, we need to compare the moles of zinc and HCl.
First, we calculate the moles of each reactant by dividing their given masses by their respective molar masses. The molar mass of zinc (Zn) is approximately 65.38 g/mol, and the molar mass of HCl is approximately 36.46 g/mol.
For zinc: moles = mass / molar mass = 100 g / 65.38 g/mol ≈ 1.53 mol
For HCl: moles = mass / molar mass = 120 g / 36.46 g/mol ≈ 3.29 mol
Since the moles of zinc (1.53 mol) are smaller than the moles of HCl (3.29 mol), zinc is the limiting reagent. This means that zinc will be completely consumed in the reaction, and there will be an excess of HCl remaining after the reaction is complete.
Learn more about Limiting reagent here: brainly.com/question/31171741
#SPJ11
for the formation of your photchromic imine you use ammonium bromide. why? 2 reasons.
The use of ammonium bromide in the formation of photchromic imine has two main reasons: To increase the solubility of the imine: Photchromic imine is not very soluble in common solvents such as water or ethanol. However, the addition of ammonium bromide to the reaction mixture increases the solubility of the imine.
2. To catalyze the formation of the imine: Ammonium bromide also acts as a catalyst in the formation of the photchromic imine. This means that it speeds up the reaction between the amine and the aldehyde to form the imine. This is due to the fact that ammonium bromide can protonate the amine, making it more reactive towards the aldehyde. Additionally, the bromide ion can act as a nucleophile, attacking the carbonyl group of the aldehyde and facilitating the formation of the imine.
In summary, the use of ammonium bromide in the formation of photchromic imine is necessary to increase the solubility of the imine and catalyze the reaction between the amine and aldehyde.
To know more about ammonium bromide visit:-
https://brainly.com/question/31817489
#SPJ11