Find points on the ellipse x^2/9 y^2 closest to (2,0)

Answer:

missing number = 7

Step-by-step explanation:

The mean is the average of a set of data points and we find it by dividing the sum of all the data points by the total number of points.

We can allow m to represent the unnown number.  Since there are 4 data points in all and we know that the mean is 9, we cause the following formula to solve for m, the missing number:

9 = (6 + m + 11 + 12) / 4

36 = m + 29

7 = m

Thus, in order to have a mean of 9 given the data set already contains the numbers 6, 11, and 12, the value of the missing number must be 7

To determine if the Melodic Kortholt Outlet's pattern of inventory disappearance differs from the published study by ORATA, we need to perform a chi-square goodness-of-fit test. The null hypothesis is that the observed frequencies in the Melodic Kortholt Outlet follow the same pattern as the expected frequencies based on the ORATA study. The alternative hypothesis is that the observed frequencies differ from the expected frequencies.

We can calculate the expected frequencies by multiplying the total number of items (80) by the percentages given in the ORATA study: shoplifting (30%), employee theft (50%), and faulty paperwork (20%). This gives us expected frequencies of 24, 40, and 16, respectively.

To calculate the chi-square test statistic, we use the formula:

χ² = ∑(observed frequency - expected frequency)² / expected frequency

Plugging in the observed and expected frequencies, we get:

χ² = (32-24)²/24 + (38-40)²/40 + (10-16)²/16
χ² = 2.67

Using a chi-square distribution table with 2 degrees of freedom (3 categories - 1), and a significance level of α = .05, the critical value is 5.991.

Since our calculated chi-square value (2.67) is less than the critical value (5.991), we fail to reject the null hypothesis and conclude that the Melodic Kortholt Outlet's pattern of inventory disappearance does not significantly differ from the ORATA study's pattern. Therefore, the manager can conclude that her store's experience follows the same pattern as other retailers.

The correct answer to the question is b) 5.991

Learn more about chi-square test: https://brainly.com/question/4543358

#SPJ11

The expression at the upper and lower limits and the difference is

∫[0,1]√(4-3[tex]x^2[/tex]) dx [tex]=(2 - (3/2)(1)^2) - (2 - (3/2)(0)^2) = (2 - 3/2) - (2 - 0) = (4/2 - 3/2) = 1/2.[/tex]

To evaluate the integral ∫√(4-3[tex]x^2[/tex]) dx, where the interval of integration is 0≤x≤1, we can use various techniques such as substitution or integration by parts. Let's proceed with the method of substitution to simplify the integral and find its value.

First, let's identify a suitable substitution for the integral. Since the expression inside the square root contains a quadratic term, it is beneficial to let u be equal to the square root of the quadratic expression. Therefore, we set u = √(4-3[tex]x^2[/tex]).

Next, we need to find the differential of u with respect to x. Taking the derivative of both sides with respect to x, we have du/dx = (-6x)/(2√(4-3[tex]x^2[/tex])) = -3x/√(4-3[tex]x^2[/tex]).

Now, we can rewrite the integral in terms of the new variable u. Substituting u = √(4-3[tex]x^2[/tex]) and du = (-3x/√(4-3[tex]x^2[/tex])) dx into the integral, we have:

∫√(4-3[tex]x^2[/tex]) dx = ∫u du

Our new integral is now much simpler, as it reduces to the integral of u with respect to u. Integrating u, we get:

∫u du = (1/2)[tex]u^2[/tex] + C,

where C is the constant of integration.

Now, we can substitute back for u in terms of x. Recall that we set u = √(4-3x^2). Therefore, the final result becomes:

∫√(4-3x^2) dx = (1/2)(√[tex](4-3x^2))^2 + C = (1/2)(4-3x^2) + C = 2 - (3/2)x^2 + C.[/tex]

To find the definite integral over the interval [0, 1], we need to evaluate the expression at the upper and lower limits and find the difference:

∫[0,1]√(4-3[tex]x^2[/tex]) dx[tex]= (2 - (3/2)(1)^2) - (2 - (3/2)(0)^2) = (2 - 3/2) - (2 - 0) = (4/2 - 3/2) = 1/2.[/tex]

Therefore, the value of the definite integral ∫√(4-3[tex]x^2[/tex]) dx over the interval [0, 1] is 1/2.

Learn more about difference here

https://brainly.com/question/17695139

#SPJ11

The desired revenue for the restaurant owner can be represented by an inequality in standard form: x^2 + x + c ≥ 0, where x represents the number of $1 increases and c is a constant term.

To calculate the hourly revenue from the buffet after x $1 increases, we multiply the price paid by each customer by the average number of customers per hour. Let's assume the price paid by each customer is p and the average number of customers per hour is n. Therefore, the total revenue per hour can be calculated as pn.
The number of $1 increases, x, represents the number of times the buffet price is raised by $1. Each time the price increases, the revenue per hour is affected. To represent the desired revenue, we need to ensure that the revenue is equal to or greater than a certain value.
In the inequality x^2 + x + c ≥ 0, the term x^2 represents the squared effect of the number of $1 increases on revenue. The term x represents the linear effect of the number of $1 increases. The constant term c represents the minimum desired revenue the owner wants to achieve.
By setting the inequality greater than or equal to zero (≥ 0), we ensure that the revenue remains positive or zero, indicating the owner's desired revenue. The specific value of the constant term c will depend on the owner's revenue goal, which is not provided in the question.

Learn more about inequality here
https://brainly.com/question/20383699



#SPJ11

The predicted number of piercings from the given regression equation for the individual would be 3.42.

The given regression equation is: Predicted number of Piercings = -0.01 + 1.33 x Gender + 0.7 x Tattoos, and is based on 231 responses to questions about piercings, tattoos, and gender.

To use this equation to predict the number of piercings for a specific individual, follow these steps:

1. Obtain the individual's gender (coded as 1 for male and 0 for female) and number of tattoos.
2. Substitute the gender value and number of tattoos into the regression equation.
3. Calculate the predicted number of piercings by solving the equation.

For example, if a male (Gender = 1) has 3 tattoos, the predicted number of piercings would be:
Predicted number of Piercings = -0.01 + 1.33 x 1 + 0.7 x 3
Predicted number of Piercings = -0.01 + 1.33 + 2.1
Predicted number of Piercings = 3.42

In this case, the predicted number of piercings for the individual would be 3.42.

To know more about regression equation refer here :

https://brainly.com/question/14184702#

#SPJ11

The estimated cost for one student to purchase the ingredients for s'mores at the camp store is $2.10.

To estimate the cost for one student, we can divide the total cost for 15 students by the number of students. Given that the ingredients cost $31.50 for 15 students, we can calculate the cost for one student as follows:

Cost for 1 student = Total cost for 15 students / Number of students

Cost for 1 student = $31.50 / 15

Cost for 1 student ≈ $2.10

Therefore, the estimated cost for one student to purchase the ingredients for s'mores at the camp store is approximately $2.10. This calculation assumes that the cost is evenly distributed among the students and that the quantity of ingredients per student remains constant.

Learn more about purchase here:

https://brainly.com/question/30478565

#SPJ11

The volume of the aquarium is 2040 cubic inches

From the question, we have the following parameters that can be used in our computation:

The aquarium (see attachment)

The volume of the aquarium is calculated as

Volume = Base area * Height

Where,

Base area = 10 * 14 + 5 * 6

Base area = 170

So, we have

Volume = 170 * 12

Evaluate

Volume = 2040

Hence, the volume of the aquarium is 2040 cubic inches

Read more about volume at

https://brainly.com/question/30849227

#SPJ4

We can continue this process to obtain a power series expansion for the antiderivative.

To evaluate the indefinite integral of [tex]e^t3 + e^x dx[/tex], we need to integrate each term separately. The antiderivative of [tex]e^t3[/tex] is simply [tex]e^t3[/tex], and the antiderivative of is also [tex]e^x.[/tex] Therefore, the indefinite integral is:

[tex]\int (e^t3 + e^x)dx = e^t3 + e^x + C[/tex]

where C is the constant of integration.

To evaluate the indefinite integral of e^cos(5t)sin(5t)dt, we can use the substitution u = cos(5t). Then du/dt = -5sin(5t), and dt = du/-5sin(5t). Substituting these expressions, we get:

[tex]\int e^{cos(5t)}sin(5t)dt = -1/5 \int e^{udu}\\= -1/5 e^{cos(5t)} + C[/tex]

where C is the constant of integration.

Finally, to evaluate the indefinite integral of cos(1/x)dx, we can use the substitution u = 1/x. Then [tex]du/dx = -1/x^2[/tex], and [tex]dx = -du/u^2[/tex]. Substituting these expressions, we get:

[tex]\int cos(1/x)dx = -\int cos(u)du/u^2[/tex]

Using integration by parts, we can integrate this expression as follows:

[tex]\int cos(u)du/u^2 = sin(u)/u + \int sin(u)/u^2 du\\= sin(u)/u - cos(u)/u^2 - \int 2cos(u)/u^3 du\\= sin(u)/u - cos(u)/u^2 + 2\int cos(u)/u^3 du[/tex]

We can repeat this process to obtain:

∫[tex]cos(1/x)dx = -sin(1/x)/x - cos(1/x)/x^2 - 2∫cos(1/x)/x^3 dx[/tex]

This is an example of a recursive formula for the antiderivative, where each term depends on the integral of the next lower power. We can continue this process to obtain a power series expansion for the antiderivative.

for such more question on indefinite integral

https://brainly.com/question/22008756

#SPJ11

To evaluate the indefinite integral, we need to find the antiderivative of the given function. For the first question, the indefinite integral of et3 + ex dx is:∫(et3 + ex)dx = (1/3)et3 + ex + C,where C is the constant of integration.

To evaluate the indefinite integral of the given function, we will perform integration with respect to x:

∫(3e^t + e^x) dx

We will integrate each term separately:

∫3e^t dx + ∫e^x dx

Since e^t is a constant with respect to x, we can treat it as a constant during integration:

3e^t∫dx + ∫e^x dx

Now, we will find the antiderivatives:

3e^t(x) + e^x + C

So the indefinite integral of the given function is:

(3e^t)x + e^x + C

To learn more about antiderivative : brainly.com/question/31385327

#SPJ11

This gives us a basis for the subspace for all 3 parts where W of [tex]P_5,[/tex]which is the column space of the matrix A.  

(a) Let [tex]v_i[/tex] be the coordinate vector of [tex]P_i[/tex] relative to the basis [tex]{P_1, P_2, P_3, P_4, P_5}.[/tex] Then the matrix representation of A is:

A =[tex][v_1, v_2, v_3, v_4, v_5][/tex]

= [1 2 3 4 5]

[2 4 7 9 10]

[3 6 10 12 14]

[4 8 12 15 18]

[5 10 15 18 20]

Since Span [tex][v_i, v_2, v_s, v_4, v_s][/tex] is a subspace of [tex]P_5,[/tex]  its column space is a subspace of [tex]P_5[/tex], which means Col(A) is contained in Span.

(b) Let A be the matrix [tex][v_1, v_2, v_3, v_4, v_5].[/tex] We can use MATLAB to compute A as A = [1 2 3 4 5]. We can then use the basis vectors to compute a basis for Span by using the Gram-Schmidt process.

To do this, we first find a basis for Span[tex]{v_i, v_2, v_s, v_4, v_s}:[/tex]

[tex]v_i = [1 0 0 0 0]\\v_2 = [0 1 0 0 0]\\v_3 = [0 0 1 0 0]\\v_4 = [0 0 0 1 0]\\v_5 = [0 0 0 0 1][/tex]

Then we can compute the transformation matrix P from the basis[tex]{v_i, v_2, v_3, v_4, v_5}[/tex] to the standard basis {1, 2, 3, 4, 5}:

P = [1 0 0 0 0]

[0 1 0 0 0]

[0 0 1 0 0]

[0 0 0 1 0]

[0 0 0 0 1]

Finally, we can use the transformation matrix P to find a basis for the subspace Span [tex]{v_i, v_2, v_s, v_4, v_s}:[/tex]

P = [1 0 0 0 0]

[0 1 0 0 0]

[0 0 1 0 0]

[0 0 0 1 0]

[0 0 0 0 1]

[0 0 0 0 0]

[0 0 0 0 0]

This gives us a basis for the subspace Span [tex]{v_i, v_2, v_s, v_4, v_s}[/tex] of P_5, which is the column space of A.

(c) To find a basis for the subspace W of [tex]P_5,[/tex] we can use the same method as in part (b). The basis vectors of W are the polynomials in [tex]P_5[/tex]that are in the span of the polynomials in [tex]{P_1, P_2, P_3, P_4, P_5}.[/tex]

Since [tex]P_1, P_2, P_3, P_4, P_5[/tex] are linearly independent, the polynomials in their span are also linearly independent, so W is a proper subspace of P_5.

To find a basis for W, we can use the Gram-Schmidt process as before, starting with the standard basis vectors {1, 2, 3, 4, 5}:

[tex]v_i = [1 0 0 0 0]\\v_2 = [0 1 0 0 0]\\v_3 = [0 0 1 0 0]\\v_4 = [0 0 0 1 0]\\v_5 = [0 0 0 0 1][/tex]

Then we can compute the transformation matrix P from the basis [tex]{v_i, v_2, v_3, v_4, v_5}[/tex] to the standard basis {1, 2, 3, 4, 5}:

P = [1 0 0 0 0]

[0 1 0 0 0]

[0 0 1 0 0]

[0 0 0 1 0]

[0 0 0 0 1]

Finally, we can use the transformation matrix P to find a basis for the subspace W:

P = [1 0 0 0 0]

[0 1 0 0 0]

[0 0 1 0 0]

[0 0 0 1 0]

[0 0 0 0 1]

[0 0 0 0 0]

Learn more about matrix visit: brainly.com/question/27929071

#SPJ4

The value of the line integral is 96π.

To use Green's Theorem, we need to find a vector field whose curl is the integrand. Let's rewrite the integrand in terms of a vector field:

F = ⟨-2x^3, 2y^3, 0⟩

Now, let's calculate the curl of F:

curl(F) = ⟨∂Q/∂x - ∂P/∂y, ∂P/∂x + ∂Q/∂y, 0⟩

= ⟨0, 0, 12x^2 + 12y^2⟩

By Green's Theorem, the line integral of F around the positively oriented circle C is equal to the double integral of the curl of F over the region enclosed by C. In other words:

∫C F · dr = ∬R curl(F) dA

where R is the region enclosed by C.

Since C is the circle x^2 + y^2 = 16, we can use polar coordinates to describe the region R. We have:

0 ≤ r ≤ 4

0 ≤ θ ≤ 2π

So, the double integral becomes:

∬R curl(F) dA = ∫0^2π ∫0^4 (12r^2) r dr dθ

= ∫0^2π (12/4) (4^4 - 0) dθ

= 96π

Therefore, the line integral of F around C is:

∫C F · dr = ∬R curl(F) dA = 96π

So, the value of the line integral is 96π.

Learn more about integral  here:

https://brainly.com/question/18125359

#SPJ11

Let's analyze the two matrices given and determine any constraint equations at the vectors of their range, as well as discover a vector that generates the null space.

Matrix (A) is not invertible and Matrix (B) is invertible.

Matrix (A):

[tex]\left[\begin{array}{ccc}-1&-2\\-2&4\end{array}\right][/tex]

Give a constraint equation, if one exists, on the vectors in the range of the matrices in Exercise 5. 5. Give a vector, if one exists, that generates the null space of the follow- ing systems of equations for 'matrices

To find the constraint equation on the vectors within the range of this matrix, we are able to perform row operations to determine the row-echelon shape or reduced row-echelon form of the matrix. This technique can help us become aware of any linear relationships among the rows of the matrix.

Performing row operations on the matrix (A):

R2 = R2 + 2R1

The resulting matrix in row-echelon form is:

[tex]\left[\begin{array}{ccc}-1&-2\\0&0\end{array}\right][/tex]

From this row-echelon shape, we will see that there may be a constraint equation on the vectors within the range: the second row includes all zeros. This means that the second row is a linear mixture of the primary row.

In other words, any vector within the variety of this matrix ought to satisfy the equation -1x - 2y = 0 or y = -0.5x, where x and y represent the additives of the vectors in the range.

Now allow's circulate directly to the second matrix:

Matrix (B):

[tex]\left[\begin{array}{ccc}-4&-1&2\\2&5&1\\-2&3&-1\end{array}\right][/tex]

To discover a vector that generates the null area, we want to decide the solutions to the homogeneous machine of equations Ax = 0, wherein A is the coefficient matrix.

By appearing row operations on the matrix (B), we can reap its row-echelon shape:

R2 = R2 + 2R1

R3 = R3 - R1

The resulting row-echelon shape is:

-[tex]\left[\begin{array}{ccc}-4&-1&2\\0&0&5\\0&2&-3\end{array}\right][/tex]

The last row of the row-echelon form implies that 0x + 2y - 3z = 0 or 2y - 3z = 0. Thus, a vector that generates the null space of this matrix is [z, (3/2)z, z], where z is a loose variable.

Now, to determine which of these matrices are invertible, we can take a look at their determinant. If the determinant of a matrix is nonzero, then the matrix is invertible.

For Matrix (A):

Determinant = (-1)(four) - (-2)(-2) = 4 - 4= 0

Since the determinant of Matrix (A) is 0, it isn't invertible.

For Matrix (B):

Determinant = (-4)(5)(-3) + (-1)(2)(-2) + (2)(1)(2) = -60 + 4+ 4= -52

Since the determinant of Matrix (B) is not 0 (-52 ≠ 0), it's far invertible.

To summarize:

Matrix (A) has a constraint equation at the vectors in its range: y = -0.5x. Matrix (A) is not invertible.

Matrix (B) has a constraint equation on the vectors in its variety: None (considering that all rows are linearly unbiased). Matrix (B) is invertible.

To know more about vectors,

https://brainly.com/question/28028700

#SPJ1

The correct question is:

"Give a constraint equation, if one exists, on the vectors in the range of the matrices in Exercise 5. 5. Give a vector, if one exists, that generates the null space of the follow- ing systems of equations for 'matrices. Which of these seven systems/matrices are invertible? (Consider the coefficient matrix and ignore the particular right-side values in parts)

Matrix A =  [tex]\left[\begin{array}{ccc}-1&-2\\-2&4\end{array}\right][/tex]  

Matrix B =  [tex]\left[\begin{array}{ccc}4&-1&2\\2&5&1\\2&3&-1\end{array}\right][/tex]"

Answer:

$15.44 each

Step-by-step explanation:

First let's add the tip. 18% = 0.18.

52.35 x 0.18 = 9.42.

Add the tip to the total.

9.42 + 52.35 = $61.77.

The problem says that it's Mark and his 3 friends. So there are 4 people total.

Divide the total bill (including tip) by 4.

$61.77/4 = $15.44 each.

The most appropriate sample size is (B) 191.

We can use the formula for the required sample size for a proportion:

n = (zα/2)^2 * p(1 - p) / E^2

where zα/2 is the critical value for the desired level of confidence (98% corresponds to zα/2 = 2.33), p is the estimated proportion of people willing to donate their organs (unknown), and E is the desired margin of error (0.03).

To be conservative, we can use p = 0.5, which gives the largest possible value of n.

Plugging in the values, we get:

n = (2.33)^2 * 0.5(1 - 0.5) / 0.03^2 ≈ 191

Therefore, the most appropriate sample size is (B) 191.

To know more about proportion refer here:

https://brainly.com/question/30657439

#SPJ11

The geometric series to give a series for 1 1+x Then differentiate your series to give a formula for + ((1+x)-4)= ... (1 +x)2 1 dx is (1+x)^(-4) = -4/(1+x) + 4/(1+x)^3.

To obtain a series representation for 1/(1+x), we can use the geometric series formula:

1/(1+x) = 1 - x + x^2 - x^3 + ...

This series converges when |x| < 1, so we can use it to find a series for 1/(1+x)^2 by differentiating the terms of the series:

d/dx (1/(1+x)) = d/dx (1 - x + x^2 - x^3 + ...) = -1 + 2x - 3x^2 + ...

Multiplying both sides by 1/(1+x)^2, we get:

d/dx (1/(1+x)^2) = -1/(1+x)^2 + 2/(1+x)^3 - 3/(1+x)^4 + ...

To obtain a formula for (1+x)^(-4), we can use the power rule for differentiation:

d/dx (1+x)^(-4) = -4(1+x)^(-5)

Multiplying both sides by (1+x)^4, we get:

d/dx [(1+x)^(-4) * (1+x)^4] = d/dx (1+x)^0 = 0

Using the product rule and the chain rule, we can expand the left-hand side of the equation:

-4(1+x)^(-5) * (1+x)^4 + (1+x)^(-4) * 4(1+x)^3 = 0

Simplifying the expression, we get:

-4/(1+x) + 4/(1+x)^3 = (1+x)^(-4)

Therefore, (1+x)^(-4) = -4/(1+x) + 4/(1+x)^3.

Learn more about geometric series here

https://brainly.com/question/31123095

#SPJ11

The answer is as follows:49.76 is the rounded answer to 4 decimal places.

Let's assume that there are x blue pens and y green pens in the box. Therefore, the total number of pens in the box is 64, and the number of red pens is 52.Using these equations, we can form a system of equations:x + y = 64 - - - (1)52 = 0.813(x + y) - - - (2)Substituting equation (1) into equation (2), we get:52 = 0.813x + 0.813y64 - y = 0.813x + 0.813y0.187x = 12 - yx = (12 - y) / 0.187Substituting the value of x into equation (1), we get:y + (12 - y) / 0.187 = 64y + 64 / 0.187 - 12 / 0.187 = y14.24 = yTherefore, there are 14.24 green pens and (64 - 14.24) = 49.76 blue pens in the box. Hence, the answer is as follows:49.76 is the rounded answer to 4 decimal places.

Learn more about the word decimal here,

https://brainly.com/question/28393353

#SPJ11

The statement about circle that is not true is that you can find the arc length of a sector if you know the circumference and radius of the circle. That is option B.

To calculate the length of an arc of a given circle the formula that should be used = central angle(∅) × radius

While to calculate the area of the sector of a given circle, the formula that should be used = (θ/360º) × πr²

Where;

r = radius

∅ = central angle of the circle.

Therefore the statement that is false concerning a circle is that 'you can find the arc length of a sector if you know the circumference and radius of the circle'.

Learn more about circle here:

https://brainly.com/question/29614115

#SPJ1

a. AT r(Xcap) is not equal to zero, r(Xcap) is not in the null space of AT.

b. AT r(Xcap) is equal to zero, we can conclude that r(Xcap) is in the null space of AT.

A group of numbers built up in a rectangular array with rows and columns. The elements, or entries, of the matrix are the integers.

(a) To find the least squares solution of the system:

x₁ + x₂ = 3

2x₁ - 3x₂ = 1

0x₁ + 0x₂ = 2

We can write this system in matrix form as AX = B, where:

A = [1 1; 2 -3; 0 0]

X = [x₁; x₂]

B = [3; 1; 2]

To find the least squares solution Xcap, we need to solve the normal equations:

ATAXcap = ATB

where AT is the transpose of A.

We have:

AT = [1 2 0; 1 -3 0]

ATA = [6 -7; -7 10]

ATB = [5; 8]

Solving for Xcap, we get:

Xcap = (ATA)-1 ATB = [1.1; 1.9]

To find the projection P = AXcap, we can simply multiply A by Xcap:

P = [1 1; 2 -3; 0 0] [1.1; 1.9] = [3; -0.7; 0]

To calculate the residual r(Xcap), we can subtract P from B:

r(Xcap) = B - P = [3; 1; 2] - [3; -0.7; 0] = [0; 1.7; 2]

To verify that r(Xcap) ∈ N(AT), we need to check if AT r(Xcap) = 0. We have:

AT r(Xcap) = [1 2 0; 1 -3 0] [0; 1.7; 2] = [3.4; -5.1; 0]

Since AT r(Xcap) is not equal to zero, r(Xcap) is not in the null space of AT.

(b) To find the least squares solution of the system:

-x₁ + x₂ = 10

2x₁ + x₂ = 5

x₁ - 2x₂ = 20

We can write this system in matrix form as AX = B, where:

A = [-1 1; 2 1; 1 -2]

X = [x₁; x₂]

B = [10; 5; 20]

To find the least squares solution Xcap, we need to solve the normal equations:

ATAXcap = ATB

where AT is the transpose of A.

We have:

AT = [-1 2 1; 1 1 -2]

ATA = [6 1; 1 6]

ATB = [45; 30]

Solving for Xcap, we get:

Xcap = (ATA)-1 ATB = [5; -5]

To find the projection P = AXcap, we can simply multiply A by Xcap:

P = [-1 1; 2 1; 1 -2] [5; -5] = [0; 15; -15]

To calculate the residual r(Xcap), we can subtract P from B:

r(Xcap) = B - P = [10; 5; 20] - [0; 15; -15] = [10; -10; 35]

To verify that r(Xcap) ∈ N(AT), we need to check if AT r(Xcap) = 0. We have:

AT r(Xcap) = [-1 2 1; 1 1 -2] [10; -10; 35] = [0; 0; 0]

Since, AT r(Xcap) is equal to zero, we can conclude that r(Xcap) is in the null space of AT.

Learn more about matrix on:

https://brainly.com/question/7437866

#SPJ4

Answer:

O(-4,-2) is the answer

Step-by-step explanation:

because it lies between a horizontal line

The distance between tower A and the fire, x, is approximately 3.992 km, and the distance between tower B and the fire, y, is approximately 14.898 km.

To solve this problem, we can use the law of sines and trigonometric ratios to set up a system of equations that can be solved to find the distances from each tower to the fire.

We know that the distance between the two towers, AB, is 20.3 km, and that the bearing from tower A to tower B is N70°E. From this, we can infer that the bearing from tower B to tower A is S70°W, which is the opposite direction.

We can draw a triangle with vertices at A, B, and the fire. Let x be the distance from tower A to the fire, and y be the distance from tower B to the fire. We can use the law of sines to write:

sin(70°)/y = sin(25°)/x

sin(70°)/x = sin(15°)/y

We can then solve this system of equations to find x and y. Multiplying both sides of both equations by xy, we get:

x*sin(70°) = y*sin(25°)

y*sin(70°) = x*sin(15°)

We can then isolate y in the first equation and substitute into the second equation:

y = x*sin(15°)/sin(70°)

y*sin(70°) = x*sin(15°)

Solving for x, we get:

x = (y*sin(70°))/sin(15°)

Substituting the expression for y, we get:

x = (x*sin(70°)*sin(15°))/sin(70°)

x = sin(15°)*y

We can then solve for y using the first equation:

sin(70°)/y = sin(25°)/(sin(15°)*y)

y = (sin(15°)*sin(70°))/sin(25°)

Substituting y into the earlier expression for x, we get:

x = (sin(15°)*sin(70°))/sin(25°)

For such more questions on distance

https://brainly.com/question/26046491

#SPJ8

It calls itself with b, c, and a+b+c as the new values for a, b, and c, respectively, and decrements n by one.

Here's a tail-recursive implementation of the tribonacci function in Scheme:

(define (tribonacci n)

 (define (tribonacci-helper a b c n)

   (if (= n 0)

       a

       (tribonacci-helper b c (+ a b c) (- n 1))))

 (tribonacci-helper 0 0 1 n))

The tribonacci-helper function is tail-recursive, meaning that the final calculation is the recursive call, and no additional work needs to be done after the recursive call returns. The tribonacci-helper function takes four arguments: a, b, c, and n. a, b, and c represent the previous three tribonacci numbers, and n is the current index being calculated. The function checks if n is zero. If so, it returns the current value of a, which will be the tribonacci number for index n. Otherwise, it calls itself with b, c, and a+b+c as the new values for a, b, and c, respectively, and decrements n by one.

Learn more about decrements here

https://brainly.com/question/28179077

#SPJ11

Answer: To apply the Ratio Test to the series

∞Σn=1 (-1)^n 2^(n) n / (5 · 8 · 11 · ... · (3n - 2))

we need to compute the limit of the ratio of successive terms:

|a_{n+1}| / |an| = [(2^(n+1))(n+1)] / [(3n+1)(3n+2)(3n+3)]

Simplifying this expression, we get:

|a_{n+1}| / |an| = [(2n+2)/3] / [(3n+1)(3n+2)/3]

|a_{n+1}| / |an| = (2n+2)/(9n^2 + 11n + 2)

Now, taking the limit as n approaches infinity:

lim n → ∞ |a_{n+1}| / |an| = lim n → ∞ (2n+2)/(9n^2 + 11n + 2)

Since the degree of the numerator and denominator are equal, we can apply L'Hopital's rule:

lim n → ∞ |a_{n+1}| / |an| = lim n → ∞ (2/(18n+11)) = 0

Since the limit of the ratio is less than 1, by the Ratio Test, the series is absolutely convergent. Therefore, the series converges.

The linear function that represents the given practical problem is:

c = 2s + 5

In this function, "c" represents the cost of a t-shirt and "s" represents the number of letters on the shirt. The function states that the cost of a t-shirt is equal to twice the number of letters on the shirt plus a $5 flat rate charged by the t-shirt company.[tex][/tex]

False. If a chi-square goodness of fit test results in a non-significant result, it means that the expected frequencies and the observed frequencies are not significantly different from each other.

The chi-square goodness of fit test is used to determine whether the observed data follows a specific distribution or not. It is based on the comparison of the observed frequencies with the expected frequencies.

Know more about the chi-square

https://brainly.com/question/4543358

#SPJ11

The linear function  in the graph is:

y = (3/2)x + 9/2

A general linear function can be written as:

y = ax + b

Where a is the slope and b is the y-intercept.

If a line passes through two points (x₁, y₁) and (x₂, y₂), then the slope is:

a = (y₂ - y₁)/(x₂ - x₁)

Here we can see the points (1, 6) and (-1, 3), then the slope is:

a = (6 - 3)(1 + 1) = 3/2

y = (3/2)*x + b

To find the value of b, we can use one of these points, if we use the first one:

6 = (3/2)*1 + b

6 - 3/2 = b

12/2 - 3/2 = b

9/2 = b

The linear function is:

y = (3/2)x + 9/2

Learn more about linear functions at:

https://brainly.com/question/15602982

#SPJ1

The value of angle is 1/2 * mGDE=90° and 1/2 * mEFG=90°.

We are given that;

The quadrilateral DEFG

Now,

Since the sum of the arcs EG and GD is equal to the measure of arc ED, we can write:

arc ED = arc EG + arc GD

mEFG + mGDE = 1/2 * arc EG + 1/2 * arc GD

mEFG + mGDE = 1/2 * (arc EG + arc GD)

mEFG + mGDE = 1/2 * arc ED

Since we know that mEFG + mGDE = 180°, we can substitute this into the equation above:

180° = 1/2 * arc ED

arc ED = 360°

So,

1/2 * mGDE = 1/2 * arc GD = (360° - arc ED)/2 = (360° - 180°)/2 = 90°

1/2 * mEFG = 1/2 * arc EG = (360° - arc ED)/2 = (360° - 180°)/2 = 90°

Therefore, by the quadrilaterals answer will be 1/2 * mGDE=90° and 1/2 * mEFG=90°.

Learn more about quadrilaterals here:

https://brainly.com/question/1365755

#SPJ1

Therefore, the polar curve has horizontal tangent lines at (0,π/2) and (0,3π/2).

To find the points where the polar curve r = 8cosθ has a vertical tangent line, we need to find where the derivative dr/dθ is undefined or infinite. We have:

r = 8cosθ

dr/dθ = -8sinθ

The derivative is undefined when sinθ = 0, which happens at θ = 0, π, 2π, etc. These are the points where the curve crosses the x-axis. At these points, the tangent line is vertical. We can find the corresponding values of r by substituting θ into the equation for r:

r(0) = 8cos(0) = 8

r(π) = 8cos(π) = -8

Therefore, the polar curve has vertical tangent lines at (8,0) and (-8,π).

To find the points where the polar curve has horizontal tangent lines, we need to find where the derivative dr/dθ is equal to 0. We have:

r = 8cosθ

dr/dθ = -8sinθ

The derivative is equal to 0 when sinθ = 0, which happens at θ = kπ, where k is an integer. These are the points where the curve crosses the y-axis. At these points, the tangent line is horizontal. We can find the corresponding values of r by substituting θ into the equation for r:

r(π/2) = 8cos(π/2) = 0

r(3π/2) = 8cos(3π/2) = 0

To know more about horizontal tangent lines,

https://brainly.com/question/29001364

#SPJ11

The z-score for the supplied data set's value of 6.88 is roughly 1.40.

The formula: can be used to determine the z-score for a certain value in a data set.

z = (x - μ) / σ

Where: x is the number we want to use to determine the z-score.

The average value of the data set is.

The data set's standard deviation is.

The data set's mean in this instance is 2.94, and its standard deviation is 2.81. The z-score for the value 6.88 of x is what we're looking for.

The z-score can be determined using the following formula:

z = (6.88 - 2.94) / 2.81 z = 3.94 / 2.81 z ≈ 1.40

As a result, the z-score for the supplied data set's value of 6.88 is roughly 1.40.

To know more about standard deviation refer to

https://brainly.com/question/23907081

#SPJ11

Let's consider the set A = {a, b, c} with three elements.

Answer : Relation R is reflexive and symmetric but not transitive.

Relation S is transitive but neither reflexive nor symmetric.

Relation R:

R = {(a, a), (b, b), (c, c), (a, b), (b, a)}

R is reflexive because every element in A is related to itself, and it is symmetric because if (a, b) is in R, then (b, a) is also in R. However, R is not transitive because although (a, b) and (b, a) are both in R, (a, a) is not in R.

Relation S:

S = {(a, b), (b, c)}

S is transitive because if (a, b) and (b, c) are both in S, then (a, c) is also in S. However, S is not reflexive because (a, a) is not in S, and it is not symmetric because (b, a) is not in S.

R ∪ S = {(a, a), (b, b), (c, c), (a, b), (b, a), (b, c)}

This is not equal to A × A since (c, a) and (c, c) are missing.

R ∩ S = ∅

There are no common elements between R and S.

To summarize:

Relation R is reflexive and symmetric but not transitive.

Relation S is transitive but neither reflexive nor symmetric.

R ∪ S ≠ A × A.

R ∩ S = ∅.

Learn more about reflexive : brainly.com/question/29119461

#SPJ11

Since polygon ABCD is similar to polygon WXYZ, the corresponding sides are proportional.

That means:

AB/WX = BC/XY = CD/YZ = AD/WZ

We can use this fact to set up the following equations:

AB/WX = 13/24

CD/YZ = 12/15 = 4/5

AD/WZ = 10/m

We are given that AB = 13 and WX = 24, so we can substitute those values in the first equation:

13/24 = BC/XY

We are also given that CD = 12 and YZ = 15, so we can substitute those values in the second equation:

4/5 = BC/XY

Since both equations equal BC/XY, we can set them equal to each other:

13/24 = 4/5

To solve for m, we can use the third equation:

10/m = AD/WZ

We know that AD = AB + BC = 13 + BC, and WZ = WX + XY = 24 + XY. Since BC/XY is the same in both polygons, we can use the results from our previous equations to find that BC/XY = 4/5.

So we have:

AD/WZ = (13 + BC)/(24 + XY) = (13 + (4/5)XY)/(24 + XY) = 10/m

Now we can solve for XY:

13 + (4/5)XY = (10/m)(24 + XY)

Multiplying both sides by m(24 + XY), we get:

13m(24 + XY)/5 + mXY(24 + XY) = 10(13m + 10XY)

Expanding and simplifying, we get:

312m/5 + 13mXY/5 + mXY^2 = 130m + 100XY

Rearranging and simplifying further, we get:

mXY^2 - 87mXY + 650m - 1560 = 0

We can use the quadratic formula to solve for XY:

XY = [87m ± sqrt((87m)^2 - 4(650m - 1560)m)] / 2m

Simplifying under the square root:

XY = [87m ± sqrt(7569m^2 - 2600m)] / 2m

XY = [87m ± sqrt(529m^2)] / 2m

XY = (87 ± 23m) / 2

Since XY must be positive, we can use the positive solution:

XY = (87 + 23m) / 2

Now we can substitute this value for XY in the equation we derived earlier:

13 + (4/5)XY = (10/m)(24 + XY)

13 + (4/5)((87 + 23m) / 2)= (10/m)(24 + (87 + 23m) / 2)

Multiplying both sides by 10m, we get:

130m + 52(87 + 23m) / 10 = (240 + 87m) / 2

Simplifying and solving for m, we get:

1300m + 52(87 + 23m) = 240 + 87m

1300m + 4524 + 1196m = 240 + 87m

2403m = -4284

m = -4284 / 2403

m ≈ -1.78

Therefore, the value of m is approximately -1.78.

The height of the pole is 43.8 feet.Answer: 43.8

At a distance of 34 feet from the base of a flag pole, the angle of elevation to the top of a flag is 48.6º. The angle of elevation to the bottom of the flag is 44.6 degrees. The flag is 5.1 feet tall and the pole extends 1 foot above the flag.The question asks to find the height of the pole.We have,Angle of elevation from the ground to the top of the flag, $$\theta_1 = 48.6°$$Angle of elevation from the ground to the bottom of the flag, $$\theta_2 = 44.6°$$Height of the flag, $$h = 5.1 feet$$Height of the pole above the flag, $$x = 1 foot$$Distance from the pole to the observer, $$d = 34 feet$$The height of the pole (y) can be found using trigonometric functions.Using tangent function, we have,$$\tan(\theta_1) = \frac{y + h + x}{d}$$On the given values, we get, $$\begin{aligned}\tan(48.6°) &= \frac{y + 5.1 + 1}{34} \\ \tan(48.6°) &= \frac{y + 6.1}{34} \\ y + 6.1 &= 34\tan(48.6°) \\ y &= 34\tan(48.6°) - 6.1 \\ y &= 43.8 \text{ feet}\end{aligned}$$Therefore, the height of the pole is 43.8 feet.

Learn more about Trigonometric here,Trigonometric functions

https://brainly.com/question/25618616

#SPJ11