⚠️I MARK BRIANLIST BEING TIMES ⚠️Match the scenario to the stage of the product development life cycle it represents.
An engineer designs a car engine to use for several different
models
testing the concepts
The description of an electric car battery specifies the amount of
time it takes to recharge
reusing technology
A storyboard details a sequence of scenes or experiences
writing engineering requirements
Answers
Hope this helps you and others
Related Questions
Drivers Education Unit 3
What is the relationship between weather conditions, human-perception time, vehicle-reaction time, and dangerous traffic situations? What can the driver do to make sure he or she is prepared to allow for such situations?
Answers
The relationship between weather conditions, human-perception time, vehicle-reaction time, and dangerous traffic situations is known to be one that is interwoven as one cannot do without the other.
What are the factors that affect perception reaction time?A lot of factors have been seen to affect reaction times, such as age, gender, physical fitness and others.
Hence, The relationship between weather conditions, human-perception time, vehicle-reaction time, and dangerous traffic situations is known to be one that is interwoven as one cannot do without the other.
The driver need to be sensitive to make sure he or she is prepared to allow for such situations.
Learn more about weather conditions from
https://brainly.com/question/17922964
#SPJ1
What is the difference between Material Safety Data Sheets and Safety Data Sheets?
Safety Data Sheets do not include protective measures
Safety Data Sheets do not include health effects
Safety Data Sheets must have 16 user-friendly sections
There are no differences
Answers
Answer:
MSDS is Material Safety Data Sheets, whereas SDS just Safety Data Sheets
Explanation:
A: i do not know what answer is
What’s the answer to this I don’t understand
Answers
Answer:
Electrons are the negatively charged particles of atom. Electrons are extremely small compared to all of the other parts of the atom. So, the negative green particles of this atom are the electrons.
Explanation:
Hope it helps:)
Which of the following sentences are written correctly verbs
Answers
Which option identifies what process should be used as a model for design in the following scenario?
John is developing a handheld camera, unlike any others that have been developed before. Even though he understands what the final product will be, it still requires further development and modification.
A. engineering design process
B. reverse engineering process
C. structural process
D. brainstorming process
Answers
Answer:
A. engineering design process
Explanation:
We are told that John is trying to develop a handheld camera. And that it is unlike any other one that has been developed before.
Now, though he understands what the final product will look like, the camera still required further development and modification. This is simply an engineering design process because it involves finding a need and trying to solve it since he already understands what the final product will be.
A gear train has a ratio of 40/24 and the driving gear is turning 100 RPM.
What is the speed of the driven gear in RPM?
Answers
Answer:
S2 = 60 RPM.
Explanation:
Given the following data;
Gear ratio = 40/24 (T2 = 40 and T1 = 24).
Speed of driving gear = 100 RPM
To find the speed of the driven gear;
Mathematically, gear ratio in terms of speed (RPM) is given by this formula;
[tex] S_{1} * T_{1} = S_{2} * T_{2} [/tex]
Where;
S1 represents the speed of the driver gear.S2 represents the speed of the driven gear.T1 represents the number of teeth of the driver gear.T2 represents the number of teeth of the driven gear.Substituting into the equation, we have;
[tex] 100 * 24 = S_{2} * 40[/tex]
[tex] 2400 = 40S_{2} [/tex]
[tex] S2 = \frac {2400}{40} [/tex]
S2 = 60 RPM.
Therefore, the speed of the driven gear is 60 revolutions per minute.
2. It is a measuring instrument used to record the amount of
electrical consumption.
A. clamp meter B. micrometer
B.micrometer
C. steel rule
D. electric meter
Answers
Answer:
The correct option is;
D. Electric meter
Explanation:
An electric meter is a metering device that is used for the measurement of the electric power consumption of an electrical powered tools, a living space or a building
Electric meter readings are used by electric utility company to sell electric power to consumers at a given rate such that it allows the electric utility company to receive payment for the total power supplied, and for the consumer to regulate the amount of power consumed
The electric meters are usually calibrated in kilowatt hour (kWh) and prepaid meter displays the amount of units of power bought, while post paid meters are usually read once each billing period which is usually one month.
duties of school principal
Answers
The duties of school principal are those responsibilities or obligation he must carry out for proper management of the school. Some of the duties are as follows:
Supervision of instructionSupervision of Curriculum Development and ImprovementSupervision of curricula rand Co-curricular ActivitiesSupervision of School HostelWhat is school administration?School administration can simply be defined as process which involves the management of all the school operations and activities.
Learn more about school administration:
https://brainly.com/question/24243635
#SPJ1
Describe how you would set up a home network with modem internet sharing.
Answers
Answer: The term wireless describe telecommunications in which electromagnetic waves carry a signal over a network.
The operation of wireless devices in a home or office that provide reliability for businesses computer user is wireless LAN (local area networks). in this a wireless LAN adapter is fitted in the personal computers.
How much salt will one teaspoon of water dissolve? Complete this experiment to find out!
Materials:
salt
a small glass jar with a lid
water
measuring spoons
Follow these steps:
Carefully measure out 3 Tablespoons of cold water into the jar.
Now measure out 1/8 teaspoon of salt and put it into the jar with the water. Put the lid on the container and shake it. Keep shaking until the salt is completely dissolved. To determine whether it has completely dissolved, hold the container up to the light and look carefully at the bottom, or open the lid and look into it. If you see little grains of salt there, it is not completely dissolved, so keep shaking until it looks the same each time you look.
If the salt does not dissolve completely after five minutes of vigorous shaking, write this in your notebook and go on to step 4. If the salt dissolves completely, add another 1/8 teaspoon of salt and repeat the process. Repeat over and over, keeping track of how many 1/8 teaspoons you add. Stop when you can’t get the salt to dissolve no matter how hard or long you shake the container.
Record how much salt you were able to dissolve in the 3 Tablespoons of water in the solubility data table.
Repeat steps 1-4, but this time using very warm or hot water. Before you do it, run the jar under hot water to warm it up so the water doesn’t cool off right away. Be sure to use the exact same amounts of water and salt as you did the first time. The only variable should be the temperature of the water.
Record your results, and then compare with your previous results.
Answer the following questions:
Were there any differences in the amount of salt that dissolved in the warm water versus the cold water?
Write a conclusion based on your results, using the terms “temperature” and “solubility.”
Based on your results, answer this question: If the oceans of the earth got warmer from global warming, would the water of the oceans become more or less salty? What do you think the effect of this change in the ocean salinity (saltiness) would be on the plants and animals that live in the ocean?
Once you have completed the activity and answered all the questions, turn your assignment in here. To see how this assignment will be graded, click tHow much salt will one teaspoon of water dissolve?
Answers
Answer:it took 4 1/8th teaspoons
Explanation:
Answer:
The answer is on the document (not a link and won't break your device, promise).
Explanation:
If an electric dryer has a nameplate rating of 5.6kva what would you use for the service calculation?
Answers
If an electric dryer has a nameplate rating of 5.6kva, Kilovolt-amperes (kVA) is often used for the service calculation.
What is a service calculation?A service calculation is known to be the NEC given way or procedure that is used for sizing service conductors, service equipment, and others so that they can be able to meet the needed electrical demands of a home and office
Note that for a person to calculate dryer load, the use of Kilovolt-amperes (kVA) is often considered as it is equivalent to kilowatts (kW).
Hence, If an electric dryer has a nameplate rating of 5.6kva, Kilovolt-amperes (kVA) is often used for the service calculation.
Learn more about electric dryer from
https://brainly.com/question/4997920
#SPJ1
DEFINE NEUTRALIZATION REATION?
Answers
Answer:
I would go with when acid and a base react quantitatively with each other. as my answer for that
Please mark me brainliest:)
Technician A says a sway bar is used to control body lean when cornering.
Technician B says that adding additional leafs to a Leaf Spring increases its
capacity. Which is correct?
Technician B only
Answers
Answer:
technician B
Explanation:
because adding leaves increasing capacity
10) A roller coaster has a circular loop of radius 5.0 m. You go around at the minimum speed.
How fast will you be moving at the bottom?
What is your acceleration? (in m/s2, in g’s)
How does this feel? Where else have you felt this effect?
Draw a Force Diagram at the bottom.
This is dangerous. What should the radius be at the bottom, so that you only feel 2 g’s?
.
Explain why these loops have the shape that they do.
Answers
Answer:
1) The speed of the roller coaster at the bottom is approximately 15.65 m/s
2) The acceleration of the roller coaster at the bottom is 6·g's
3) The high acceleration is 6 times the force of the weight of the passengers
The high acceleration can cause gravity induced loss of consciousness
4) Please find attached a force diagram of the forces at the bottom of the roller coaster created with Microsoft Visio
5) For the acceleration at the bottom to be 2·g's the radius of the rollercoaster at the bottom should be 25 meters
5) The radius at the bottom of roller coasters are increased to reduce the normal force felt by the passengers as they pass the bottom of a circular roller coaster
Explanation:
1) The given parameters are;
The radius of the roller coaster, r = 5.0 m
The speed of the roller coaster = Minimum = 0 m/s
The shape of the roller coaster's path = Circular loop
Therefore, the maximum height of the roller coaster, h = The diameter of the of a circular path of the roller coaster, d = 2 × r = 2 × 5.0 m = 10.0 m
∴ h = 10.0 m
The minimum speed is f=given by the following equation;
[tex]F_N = \dfrac{m \cdot v^2}{R} - m \cdot g = 0 \ (At \ the \ top \ of \ the \ roller \ coaster's \ path)[/tex]
Therefore, we have;
[tex]\dfrac{m \cdot v^2}{R} = m \cdot g[/tex]
From which we have;
v = √(R × g)
Where;
R = The radius of the path of the roller coaster = 5.0 m
g = The acceleration due to gravity = 9.8 m/s² = constant
By plugging in the values of the variable, 'R', and the constant, 'g', we get;
v = √(5.0 m × 9.8 m/s²) = 7 m/s
The minimum speed of the roller coaster, v = 7 m/s
The speed of the roller coaster at the bottom is given by the conservation of energy formula as follows;
The energy at the top of the roller coaster = The energy at the bottom of the roller coaster
∴ The total mechanical energy of the roller coaster, M.E., is constant and at the top, [tex]M.E._{top}[/tex], is given as follows;
[tex]M.E._{top}[/tex] = 1/2·m·v₁² + m·g·h₁
At the bottom, the total mechanical energy is given as follows;
[tex]M.E._{bottom}[/tex] = 1/2·m·v₂² + m·g·h₂
Where;
v₁ = The velocity of the roller coaster at the top = 7 m/s
h₁ = The height of the roller coaster at the top = 10 m
v₂ = The speed of the roller coaster at the bottom
h₂ = The height of the roller coaster at the bottom = 0 m
g = The acceleration due to gravity = 9.8 m/s² = Constant
By plugging in the values, we get;
M.E. = [tex]M.E._{top}[/tex] = [tex]M.E._{bottom}[/tex]
∴ 1/2·m·v₁² + m·g·h₁ = 1/2·m·v₂² + m·g·h₂
1/2 × (7 m/s)² + 9.8 m/s² × 10.0 m = 1/2 × v₂² + 9.8 m/s² × 0 m
122.5 m²/s² = 1/2 × v₂²
∴ v₂² = 2 × 122.5 m²/s² = 245 m²/s²
v₂ = √(245 m²/s²) = 7·√5 m/s ≈ 15.65 m/s
The speed of the roller coaster at the bottom, v₂ ≈ 15.65 m/s
2) The normal force on the car at the bottom of the roller coaster is given as follows;
[tex]F_N = \dfrac{m \cdot v_2^2}{R} + m \cdot g = m \times \left(\dfrac{ v_2^2}{R} + g \right )[/tex]
Force, F = Mass, m × Acceleration, a
∴ F = m×a
Therefore, the acceleration at the bottom, 'a' by comparison of the general equation for force, 'F', and the normal force, [tex]F_N[/tex], is given as follows;
[tex]a = \left(\dfrac{ v_2^2}{R} + g \right )[/tex]
Plugging in the values for 'v₂²', 'R', ang 'g', gives;
[tex]a = \left(\dfrac{ v_2^2}{R} + g \right ) = \left(\dfrac{ 245}{5} + 9.8 \right ) = \left(49+ 9.8 \right ) = (5 + 1) \times 9.8 = 6 \times 9.8 = 6 \times g[/tex]
a = 6·g = 58.8 m/s²
3) The high acceleration will lead to a very high normal force (equal to 6 times each of their weight) experienced by the passengers with a force
The high acceleration is dangerous and can lead to gravity induced loss of consciousness since it is more than 3·g's
4) Please find attached the force diagram at the bottom of the roller coaster created with Microsoft Visio
5) For the acceleration at the bottom to be 2·g's, we have;
[tex]a = \left(\dfrac{ v_2^2}{R} + g \right )[/tex]
At a = 2·g, we have;
[tex]2 \cdot g = \left(\dfrac{ v_2^2}{R} + g \right )[/tex]
[tex]\therefore 2 \cdot g - g = g = \dfrac{ v_2^2}{R}[/tex]
[tex]R = \dfrac{ v_2^2}{g} = \dfrac{245}{9.8} = 25[/tex]
R = 25 m
The radius at the bottom of the roller coaster should be 25 meters so that only 2·g's is felt
5) The shape of the roller coaster has an increases the radius at the bottom so as to reduce the acceleration of the car
The Marion County School District is planning to build a new elementary school near a commercial district. Which of the following types of construction companies would be best for the job?
A.Commercial
B.Institutional
C.Residential
D.Industrial
Answers
Answer:
B or C
Explanation:
Commercial has to be for things like political and industrial is for making/providing things
Which option explains why Tyler is impressed in the following scenario?
Tyler's dishwasher recently stopped working. As he was browsing some of the newer models in the store, he was thrilled with what they offered.
The newer dishwasher models were much less expensive due to recent changes in sustainability.
The efficiency rating of the dishwasher was significantly improved, meaning it would save him money and be more eco-friendly.
Engineers were able to design dishwasher models with superficial changes, making them look more attractive.
Due to newly developed products, there was a much wider variety of energy-efficient dishwashers available.
Answers
Answer:
Its B). The efficiency rating of the dishwasher was significantly improved, meaning it would save him money and be more eco-friendly.
Explanation:
On EDG
Answer:
It's B) i just did it in edg
Explanation:
What are the transfer of energy for the 6 simple machine? Ex: inclined plane is gravitational potential energy to mechanical energy. What are the rest?
Answers
Answer:
I. Inclined plane: GPE to KE.
II. Screw: KE to GPE.
III. Wheel and axle: GPE to KE.
IV. Lever: GPE to KE.
V. Wedge: GPE to KE.
VI. Pulley: GPE to KE.
Explanation:
A simple machine can be defined as a type of machine with no moving parts but can be used to perform work.
Basically, a simple machine allows for the transformation of energy into work. The six simple machines are;
I. Inclined plane: gravitational potential energy to mechanical energy (kinetic energy). It is set at an angle and then used to lift an object.
II. Screw: kinetic energy to potential energy. It is held in position and then used to tighten two or more objects together.
III. Wheel and axle: gravitational potential energy to mechanical energy (kinetic energy). It comprises of two circular objects which aids in the motion of an object such as a car.
IV. Lever: gravitational potential energy to mechanical energy (kinetic energy). It comprises of a pivoted bar at a fixed point (fulcrum) that allows it to be used for lifting heavy objects.
V. Wedge: gravitational potential energy to mechanical energy (kinetic energy). It can be used to split objects into halves.
VI. Pulley: gravitational potential energy to mechanical energy (kinetic energy). It is made up of a wheel and rope which allows force to be multiplied such as in a drawing well.
Energy can be defined as the ability (capacity) to do work. The two (2) main types of energy are;
a. Gravitational potential energy (GPE): it is an energy possessed by an object or body due to its position above the earth.
b. Kinetic energy (KE): it is an energy possessed by an object or body due to its motion.
a torque of 24 ft pounds is the result when a force of ______ pounds is applied to a wrench that is 18 inches long.
Answers
Answer:
16
Explanation:
The product of feet and pounds is the torque. 18 inches is 1.5 feet.
(1.5 ft)(x lbs) = 24 ft·lbs
x lbs = (24 ft·lbs)/(1.5 ft) = 16 lbs
The force will be 16 pounds applied to an 18-inch wrench to obtain 24 ft·lbs.
Answer:
16
Explanation:
if when you put your shirt in your pants, your shirt is tucked, does that mean when your shirt is over your pants, your pants are tucked into your shirt...?
Answers
Answer:
confusing, but yes
Explanation:
your shirt is over you pants I believe.
what are the inputs and outputs of a sailboat?
Answers
Answer:
sailing ships were the primary means of maritime trade and transportation; exploration across the seas and oceans was reliant on sail for anything other than the shortest distances. Naval power in this period used sail to varying degrees depending on the current technology, culminating in the gun-armed sailing warships of the Age of Sail.Why are the main cables of the Golden Gate Bridge made of numerous smaller cables?
Answers
Answer:
The main cables of the Golden Gate Bridge are made of numerous smaller cables because by combining several thousand in number of smaller cables, each having a diameter which is approximately the diameter of a pencil, into the required cable diameter dimensions, the flexibility, strength, resistance to cracking, rotation resistance, crushing resistance and fatigue resistance of the main cables are increased, and failure of a few strands in a multi-stranded cable is more likely to be detected before catastrophic failure takes place than in a single cable
The properties of strength and flexibility that the cable provides are required so that the bridge can better cushion the seismic turbulence of the water and strong wind energy at the bay of San Francisco, the location of the bridge
Explanation:
Question # 7
Long Text (essay)
In paragraph of 125 words, explain at least three ways that engineers explore possible solutions in their projects
Answers
Answer:
To do this, engineers often use a technique called "brainstorming." Brainstorming is a team creativity activity that helps you generate a large number of potential solutions to a problem or challenge.
Engineers use the engineering design process when brainstorming solutions to real-life problems; they develop these solutions by testing and redesigning prototypes that work within given constraints.
Engineers will often use reverse-engineering to solve problems. For example, by taking things apart to determine an issue, finding a solution and then putting the object back together again. Engineers know how things work, and so they constantly analyse things and discover how they work.
Safeguarding personal data and personal wealth from cyberattacks. ...
Addressing climate change through engineering innovation. ...
Feeding the growing world population through cutting-edge bio-engineering and agricultural innovations. ...
Improving health and well-being through life sciences, nanotechnology, and bio engineering.
MARK ME AS BRAINLISTAnswer:
1) Prototyping is the process of experimental testing of samples of design, or model of a product with the possibility of the inclusion of control of parameters in order to determine the workability of a solution.
2) Simulation is the process of creating an imitation of a situation, operation or process which can be used to determine if a particular solution will be able to work as required in the simulated environment of a problem.
3) Calculations are used to find preliminary results of particular situations, their cause and effects based on scientific laws, theories and hypothesis such that the factor of the problem is equated with the available ideas to find the best possible solution.
Explanation:
⚠️I MARK BRAINLIST I AM BRING TIMED PIC INCLUDED⚠️Match the stage of the product development life cycle to the product that best represents it.
building complex systems
car engines employed for more than one model
reusing technology
sophisticated jet airliners
pushing a technology to market
the latest iPhone version
Answers
Car engines for more than one model
The latest iPhone model
Is a desk/table a solid, frame, shell or combination
Answers
Where does Henrietta think William might be?
the park
the cemetery
his favorite restaurant
Answers
Answer:
The cemetery
Explanation:
Answer:
B.) CEMETERY
Explanation:
Have a nice day!
Which of the following is NOT an example of a direct cost of workplace injuries?
Medical expenses
Workers’ compensation payments
Cost for legal services
Lost productivity
Answers
Answer:
Lost productivity
bruuh its sum werid people on brainly
Answers
Answer:
what happend??
Explanation:
Which of these is a unit of heat?
A.
joule
B.
watt
C.
kelvin
D.
joule/kelvin
E.
mole
Answers
Answer:
D
Explanation:
Both the joule and the kelvin represent heat. Kelvin is a unit of measurement for temperature and joule is more heat energy.
Answer:
Joules
Explanation:
It's heat
Summarize key
points from each
paragraph
READING Customer Service
Learning Seed: Communicating with Customers
What Makes Good Customer Service?
When you work in a retail store, what services are you offering? You
may think that your employer is paying you to prepare food, stock
shelves or tidy up the sales floor, but those aren't the real reasons.
Your employer is paying you to serve the needs of his or her
customers. Without good customer service, the customers would
disappear, and without customers, the business would fail. How you
treat the customers has a big impact on how well the store succeeds.
So what makes good customer service? The main ingredient is trying
to understand the customer. Understanding what a customer wants,
doesn't want, and how he or she wants to be treated are the keys to
having happy customers. There are many components to good
customer service, but in the end they all come down to the same goal:
understanding your customers.
Successful (And Not-So-Successful) Interactions What are the key points?
Answers
Answer:
what are is ethiopia cultural ?
Which article of the NEC describes the proper placement of outlets in this type of room? Also, based on the given load what type of outlets are needed for this room?
Answers
The Article of the NEC that describes the proper placement of outlets in rooms is the Article 210.
What is NEC?
NEC is the short or acronym for National Electric Code.
For example, with regard to Receptacles, section (210-21(b)) of the Article 100 indicates that a "Receptacle" is a contact device provided at an outlet for the connecting of an attachment plug.
The terms "receptacle" and "receptacles" occur often in the National Electrical Code (NEC).
Learn more about NEC at;
https://brainly.com/question/14507799
#SPJ1