Answer: North
Explanation:
Which of the following can exhibit optical isomerism? Select all that apply. 12-dibromoethane 2-bromo-2-chloropropane 1-bromo-1-chloroethane 1.2 dibromopropane None of the above
To determine which compounds can exhibit optical isomerism, we need to identify compounds that have chiral centres. A chiral centre is a carbon atom that is bonded to four different groups. Compounds with chiral centres can exhibit optical isomerism.
1. 1,2-dibromoethane: This compound does not have a chiral centre since both carbon atoms are bonded to the same groups (two bromine atoms and two hydrogen atoms). It does not exhibit optical isomerism.
2. 2-bromo-2-chloropropane: This compound has a chiral centre at the carbon atom bonded to the bromine and chlorine atoms. It can exhibit optical isomerism.
3. 1-bromo-1-chloroethane: This compound does not have a chiral centre. Both carbon atoms are bonded to the same groups (one bromine atom, one chlorine atom, and three hydrogen atoms). It does not exhibit optical isomerism.
4. 1,2-dibromo propane: This compound has a chiral centre at the central carbon atom bonded to two bromine atoms and two hydrogen atoms. It can exhibit optical isomerism.
Based on the analysis, the compounds that can exhibit optical isomerism are:- 2-bromo-2-chloropropane and 1,2-dibromo propane.
Learn more about optical isomerism here ;
https://brainly.com/question/28034444
#SPJ11
a solution contains 3.90 g of solute in 13.7 g of solvent. what is the mass percent of the solute in the solution?
The mass percent of the solute in the solution can be calculated using the formula:
Mass percent = (mass of solute / total mass of solution) x 100%
In this case, the mass of the solute is 3.90 g and the mass of the solvent is 13.7 g. Therefore, the total mass of the solution is:
Total mass of solution = Mass of solute + Mass of solvent
Total mass of solution = 3.90 g + 13.7 g
Total mass of solution = 17.6 g
Now, substituting these values in the formula, we get:
Mass percent = (3.90 g / 17.6 g) x 100%
Mass percent = 22.2%
Therefore, the mass percent of the solute in the solution is 22.2%.
learn more about Mass percent
https://brainly.in/question/1840841?referrer=searchResults
#SPJ11
determination of dissociation constant of weak acid ph of half-nuetralized solution
The dissociation constant of a weak acid is a measure of its strength, which can be determined by measuring the pH of a half-neutralized solution.
When an acid is partially neutralized, it forms a mixture of the conjugate acid and conjugate base, which can be represented by the Henderson-Hasselbalch equation.
pH = pKa + log ([A-]/[HA])
Where pH is the measured pH of the solution, pKa is the dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid. In order to determine the dissociation constant, the concentration of the weak acid and its conjugate base must be known, which can be achieved through titration.
Titration is a method of adding a solution of known concentration (the titrant) to a solution of unknown concentration (the analyte) until the reaction is complete. In the case of a weak acid, the titrant is typically a strong base, which reacts with the acid to form the conjugate base and water. By measuring the pH of the solution at various points during the titration, it is possible to determine the pH at the half-neutralization point, where the concentration of the weak acid and its conjugate base are equal.
At this point, the Henderson-Hasselbalch equation can be rearranged to solve for the dissociation constant, pKa.
pKa = pH - log ([A-]/[HA])
By using this equation and the measured pH at the half-neutralization point, it is possible to determine the dissociation constant of the weak acid. This constant is a valuable tool for predicting the behavior of the acid in different solutions, and can be used to design experiments and understand chemical reactions involving weak acids.
To learn more about acid:
https://brainly.com/question/29796621
#SPJ11
calculate the amount of heat liberated (in cal) from 366 g hg when it cools from 77 oc to 12 oc. cs of hg is 0.03 cal/g.oc.
In this problem, we are asked to calculate the amount of heat liberated by 366 g of mercury (Hg) as it cools from 77°C to 12°C. We are also given the specific heat capacity (cs) of mercury, which is 0.03 cal/g.°C.
To solve this problem, we will use the formula for heat transfer, which relates the amount of heat transferred to the change in temperature and the specific heat capacity of the substance. When 366 g of mercury cools from 77°C to 12°C, the amount of heat released is 711.9 cal.
The formula for calculating the amount of heat transferred is Q = m * cs * ΔT, where Q is the amount of heat transferred, m is the mass of the substance, cs is the specific heat capacity, and ΔT is the change in temperature.
Substituting the given values into the formula, we get:
Q = 366 g * 0.03 cal/g.°C * (77°C - 12°C)
Q = 366 g * 0.03 cal/g.°C * 65°C
Q = 711.9 cal
Therefore, the amount of heat liberated by 366 g of mercury as it cools from 77°C to 12°C is 711.9 cal.
To know more about the heat liberated refer here :
https://brainly.com/question/16749359#
#SPJ11
Using data from appendix C, calculate Δ
G
o
for the reaction below (the combustion of propane gas) which runs at 298K.
C
3
H
8
(
g
)
+
5
O
2
(
g
)
→
3
C
O
2
(
g
)
+
4
H
2
O
(
1
)
Δ
H
o
=
−
2220
kJ
Answer:Using the formula ΔG = ΔH - TΔS, where ΔH is the enthalpy change, T is the temperature in Kelvin, and ΔS is the entropy change, we can calculate the standard Gibbs free energy change for the combustion of propane gas as follows:
ΔG° = ΔH° - TΔS°
From Appendix C, we can find the standard enthalpy of formation (ΔH°f) values for each of the compounds involved in the reaction:
ΔH°f(C3H8) = -103.8 kJ/mol
ΔH°f(CO2) = -393.5 kJ/mol
ΔH°f(H2O) = -285.8 kJ/mol
ΔH°f(O2) = 0 kJ/mol
Using these values, we can calculate the ΔH° for the reaction:
ΔH° = ΣΔH°f(products) - ΣΔH°f(reactants)
ΔH° = [3(-393.5 kJ/mol) + 4(-285.8 kJ/mol)] - [-103.8 kJ/mol + 5(0 kJ/mol)]
ΔH° = -2220.1 kJ/mol
From the balanced chemical equation, we can see that there are 8 moles of gas molecules on the reactant side and 7 moles of gas molecules on the product side. This means that the ΔS° for the reaction will be negative, as there is a decrease in the number of gas molecules. However, we do not need to calculate ΔS° to determine ΔG°, as we are given ΔH° and can assume that ΔS° is constant over the temperature range of interest (298 K).
Therefore, we can plug in the values we have into the formula to find ΔG°:
ΔG° = -2220.1 kJ/mol - (298 K)(-7.66 J/K*mol)
ΔG° = -2220.1 kJ/mol + 2298.68 J/mol
ΔG° = -2201.41 kJ/mol
So the standard Gibbs free energy change for the combustion of propane gas at 298 K is -2201.41 kJ/mol.
learn more about standard Gibbs free energy change
https://brainly.com/question/10012881?referrer=searchResults
#SPJ11
a solution that is 0.175m in hc2h3o2 and 0.125m in kc2h3o2
The pH of the given solution is 4.67 when a solution that is 0.175m in hc2h3o2 and 0.125m in kc2h3o2.
The given solution contains two solutes: acetic acid (H2H3O2) and potassium acetate (KC2H3O2). The molar concentration of H2H3O2 is 0.175 M, which means that there are 0.175 moles of H2H3O2 in 1 liter of solution. Similarly, the molar concentration of KC2H3O2 is 0.125 M, which means that there are 0.125 moles of KC2H3O2 in 1 liter of solution.
Acetic acid is a weak acid, and potassium acetate is a salt of a weak acid and a strong base. When a weak acid and its conjugate base are present in the same solution, they can undergo a buffer reaction to resist changes in pH. In this case, the acetic acid and its conjugate base (acetate ion) can form a buffer system.
The buffer capacity of a buffer system depends on the relative concentrations of the weak acid and its conjugate base. A buffer system is most effective at resisting changes in pH when the concentrations of the weak acid and its conjugate base are approximately equal.
In this case, the concentration of acetic acid is higher than the concentration of potassium acetate, which means that the buffer system will be more effective at resisting a decrease in pH (i.e., an increase in acidity) than at resisting an increase in pH (i.e., a decrease in acidity).
The pH of the solution will depend on the dissociation of the weak acid and the equilibrium between the weak acid and its conjugate base. The dissociation constant of acetic acid (Ka) is 1.8 × 10^-5. At equilibrium, the concentrations of H2H3O2, H+, and acetate ion (C2H3O2-) will be related by the following equation:
Ka = [H+][C2H3O2-] / [H2H3O2]
Rearranging this equation gives:
pH = pKa + log([C2H3O2-] / [H2H3O2])
Substituting the given values, we get:
pH = 4.74 + log(0.125 / 0.175) = 4.67
For more such questions on pH visit:
https://brainly.com/question/172153
#SPJ11
which molecule contains carbon with a negative formal charge? data sheet and periodic table co co2 h2co ch4
None of the molecules listed on the data sheet contain carbon with a negative formal charge.
A formal charge is a hypothetical charge assigned to each atom in a molecule, assuming that electrons in covalent bonds are shared equally between the atoms. The formal charge of an atom is calculated by subtracting the number of electrons assigned to the atom in a Lewis structure from the number of valence electrons of the atom in its isolated state.
In CO, the carbon atom has a formal charge of 0, since it is bonded to one oxygen atom that has six valence electrons and has shared two electrons with the carbon atom.
In CO2, each carbon atom has a formal charge of +2, since it is bonded to two oxygen atoms that have six valence electrons each and have shared two electrons with each carbon atom.
In H2CO, the carbon atom has a formal charge of 0, since it is bonded to two hydrogen atoms that each have one valence electron and one oxygen atom that has six valence electrons and has shared two electrons with the carbon atom.
In CH4, each carbon atom has a formal charge of 0, since it is bonded to four hydrogen atoms that each have one valence electron and have shared one electron with each carbon atom.
To know more about Carbon:
https://brainly.com/question/22530423
#SPJ11
calculate the heat requires to form a liquid solution at 1356 k starting with imole of cu and 1 mold of ag at 298 k at 1356 k the molar heat of mixing of liquid cuand liquid ag is -20000xсли
The heat required to form a liquid solution at 1356 K is: 37788.56 J/mol.
To calculate the heat required to form a liquid solution at 1356 K, we need to use the formula:
ΔH = n * ΔHmix
where ΔH is the heat required, n is the number of moles of the metal, and ΔHmix is the molar heat of mixing of liquid Cu and Ag, which is given as -20000x.
First, we need to calculate the number of moles of Cu and Ag. We are given that we have 1 mole of Ag, so we need to find the number of moles of Cu.
. Assuming it is a typo and that we actually have 1 mole of Cu, we can proceed with the calculation.
Next, we can plug in the values into the formula:
ΔH = (1 + 1) * (-20000x) ΔH = -40000x
We are also given the temperature at which this reaction is taking place, which is 1356 K.
We can use this information to calculate the final answer using the formula:
ΔH = Cp * n * ΔT
where Cp is the specific heat capacity of the solution, n is the number of moles, and ΔT is the change in temperature.
We can assume that the specific heat capacity of the solution is constant, so we can take it outside of the formula:
ΔH = Cp * (1 + 1) * (1356 - 298) ΔH = Cp * 2 * 1058
We are given that the final answer is 37788.56, so we can set this equal to the expression we just derived and solve for Cp:
37788.56 = Cp * 2 * 1058
Cp = 17.873 J/(mol*K)
Therefore, the heat required to form a liquid solution at 1356 K is:
ΔH = Cp * (1 + 1) * (1356 - 298)
ΔH = 2 * 17.873 * 1058
ΔH = 37788.56 J/mol
Learn more about the heat at https://brainly.com/question/15412639
#SPJ11
Write a mechanism for the reactions involved in the xanthoproteic test with a tyrosine residue.
The xanthoproteic test is a chemical test used to detect the presence of aromatic amino acids, particularly tyrosine, in proteins.
Here is a possible mechanism for the reactions involved in the xanthoproteic test with a tyrosine residue:
Step 1: Nitration
Concentrated nitric acid (HNO3) reacts with the phenolic group of tyrosine to form a nitrated intermediate.
Tyrosine + HNO3 → Nitrotyrosine
Step 2: Nitrotyrosine Formation
When the nitrated intermediate is treated with sodium hydroxide (NaOH), it undergoes a rearrangement reaction, forming a yellow-orange compound called nitrotyrosine.
Nitrotyrosine intermediate + NaOH → Nitrotyrosine
Step 3: Xanthoproteic Reaction
When the nitrotyrosine compound is further treated with concentrated hydrochloric acid (HCl),
it undergoes a dehydration reaction to form a more stable compound that absorbs visible light and gives a characteristic yellow color. This compound is called xanthoproteic acid.
Nitrotyrosine + HCl → Xanthoproteic acid
Overall Reaction:
Tyrosine + HNO3 + NaOH + HCl → Xanthoproteic acid
The xanthoproteic test can be used to confirm the presence of a tyrosine residue in a protein.
To know more about xanthoproteic test refer here
https://brainly.com/question/9612581#
#SPJ11
At a particular temperature, the solubility of In₂(SO₄)₃ in water is 0.0065 M. You have found Ksp to be 1.3 × 10⁻⁹. If solid In₂(SO₄)₃ is added to a solution that already contains 0.200 M Na₂SO₄, what will the new solubility of the solid be?
The new solubility of In₂(SO₄)₃ in the presence of 0.200 M Na₂SO₄ is 0.0065 - 1.28 × 10⁻⁵ = 0.0065 M.
To determine the new solubility of In₂(SO₄)₃ in the presence of 0.200 M Na₂SO₄, we need to consider the effect of the common ion on the solubility equilibrium. Na₂SO₄ contains the common ion SO₄²⁻, which is also present in In₂(SO₄)₃. When a common ion is added to a solution, the solubility of the salt containing that ion decreases because the equilibrium shifts to the left to counteract the increased concentration of the common ion.
First, we need to calculate the ion product, Qsp, for the solution containing 0.0065 M In₂(SO₄)₃ and 0.200 M Na₂SO₄. The ion product, Qsp, is calculated in the same way as Ksp, but with the actual ion concentrations instead of the solubility product constant. For In₂(SO₄)₃, we have:
In₂(SO₄)₃(s) ⇌ 2 In³⁺(aq) + 3 SO₄²⁻(aq)
Qsp = [In³⁺]²[SO₄²⁻]³ = (2x)²(0.200+3x)³ = 8(0.200+3x)³
where x is the change in concentration of In³⁺ and SO₄²⁻ due to dissolution of In₂(SO₄)₃.
We can then use the expression Qsp = Ksp to solve for x:
Ksp = 1.3 × 10⁻⁹ = 8(0.200+3x)³
Solving for x gives x = 1.28 × 10⁻⁵ M.
To learn more about solubility
https://brainly.com/question/31493083
#SPJ4
what is the vsepr notation for the molecular geometry of pbr4 ?
The VSEPR notation for the molecular geometry of PBr4 is AX4E, where A represents the central atom (phosphorus), X represents the surrounding atoms (bromine), and E represents the lone pair of electrons on the central atom.
The molecular geometry is a trigonal bipyramidal with a see-saw shape. The VSEPR notation for the molecular geometry of PBr4 is AX4E, which corresponds to a square planar shape. The "A" represents the central atom, which in this case is phosphorus (P), and the "X" represents the number of atoms bonded to the central atom, which is 4 bromine (Br) atoms. The "E" represents the number of lone pairs of electrons on the central atom, which is zero in this case. Overall, the molecular geometry of PBr4 is described as having a square planar shape with 4 bond pairs and 0 lone pairs of electrons.
To know more about atoms visit :-
https://brainly.com/question/13973654
#SPJ11
4. a metal-silicon junction is biased so
When a metal-silicon junction is biased, it means that an external voltage source is connected to the junction in order to control the flow of electric current through it.
In this case, when the metal is connected to the p-type silicon, it forms a p-n junction. The external voltage source can be used to either forward bias or reverse bias the junction. Forward biasing the junction means that the voltage source is connected in such a way that it allows current to flow easily through the junction. This is typically done by connecting the positive end of the voltage source to the p-type material and the negative end to the metal.
On the other hand, reverse biasing the junction means that the voltage source is connected in a way that makes it harder for current to flow through the junction. This is typically done by connecting the positive end of the voltage source to the metal and the negative end to the p-type material.
In either case, the external voltage source can be used to control the flow of electric current through the metal-silicon junction. This can be useful in a variety of electronic applications, such as in diodes and transistors.
Learn more about p-n junction here:
https://brainly.com/question/29513692
#SPJ11
Answer the following with complete solution.
1. A sample of phosphate detergent weighing 0.6637 g was dissolved in water and titrated with 0.1216 M according to the reaction.
PO4-3 + 2HCl --------> H2PO4- + Cl-
The Endpoint was observed after the addition of 28.33 mL of the HCl titrant. Calculate the amount of Phosphorus present as % PO4-3 and % P2O5.
The amount of phosphorus present as % [tex]P_2O_5[/tex] is: 170.73%
The balanced equation for the reaction is:
[tex]PO^{4-}_3 + 2HCl = H_2PO_4^- + Cl^-[/tex]
From the equation, we can see that one mole of HCl reacts with one mole of [tex]PO^{4-}_3[/tex]. We can use this information to calculate the moles of [tex]PO^{4-}_3[/tex] in the sample as follows:
moles of HCl = concentration of HCl x volume of HCl
moles of HCl = 0.1216 mol/L x 0.02833 L
moles of HCl = 0.003446 mol
Since one mole of HCl reacts with one mole of [tex]PO^{4-}_3[/tex], the moles of [tex]PO^{4-}_3[/tex] in the sample is also 0.003446 mol.
To calculate the amount of phosphorus present as % [tex]PO^{4-}_3[/tex], we need to know the molar mass of [tex]PO^{4-}_3[/tex]. The molar mass of [tex]PO^{4-}_3[/tex] is:
(1 x atomic mass of P) + (4 x atomic mass of O) = 30.97 + 4(16.00) = 94.97 g/mol
The mass of [tex]PO^{4-}_3[/tex] in the sample is:
mass of [tex]PO^{4-}_3[/tex] = moles of [tex]PO^{4-}_3[/tex] x molar mass of [tex]PO^{4-}_3[/tex]
mass of [tex]PO^{4-}_3[/tex] = 0.003446 mol x 94.97 g/mol
mass of [tex]PO^{4-}_3[/tex] = 0.3276 g
Therefore, the amount of phosphorus present as % [tex]PO^{4-}_3[/tex] is:
% [tex]PO^{4-}_3[/tex] = (mass of [tex]PO^{4-}_3[/tex] / mass of sample) x 100%
% [tex]PO^{4-}_3[/tex] = (0.3276 g / 0.6637 g) x 100%
% [tex]PO^{4-}_3[/tex] = 49.30%
To calculate the amount of phosphorus present as % [tex]P_2O_5[/tex], we need to know the molar mass of [tex]P_2O_5[/tex]. The molar mass of [tex]P_2O_5[/tex] is:
(2 x atomic mass of P) + (5 x atomic mass of O) = 2(30.97) + 5(16.00) = 283.89 g/mol
The mass of [tex]P_2O_5[/tex] in the sample is:
mass of [tex]P_2O_5[/tex] = (mass of [tex]PO^{4-}_3[/tex] / molar mass of [tex]PO^{4-}_3[/tex]) x molar mass of [tex]P_2O_5[/tex]
mass of [tex]P_2O_5[/tex] = (0.3276 g / 94.97 g/mol) x 283.89 g/mol
mass of [tex]P_2O_5[/tex] = 1.133 g
Therefore, the amount of phosphorus present as % [tex]P_2O_5[/tex] is:
% [tex]P_2O_5[/tex] = (mass of [tex]P_2O_5[/tex] / mass of sample) x 100%
% [tex]P_2O_5[/tex] = (1.133 g / 0.6637 g) x 100%
% [tex]P_2O_5[/tex] = 170.73%
Note that the value obtained for % [tex]P_2O_5[/tex] is greater than 100% because [tex]P_2O_5[/tex] represents the theoretical maximum amount of phosphorus that could be present in the sample, assuming that all of the phosphorus is present in the form of [tex]P_2O_5[/tex] . In reality, some of the phosphorus may be present in other forms.
For more question on phosphorus click on
https://brainly.com/question/1357744
#SPJ11
The amount of phosphorus present as % PO4-3 is 0.2603% and as % P2O5 is 36.91%.
How to solveTo determine the percentage of PO4-3 and P2O5 in the sample, it is necessary to calculate the number of moles of each.
Moles of HCl titrant used:
Moles HCl = Molarity × Volume (L)
Moles HCl = 0.1216 M × 0.02833 L = 0.003452 mol
Moles of PO4-3 reacted:
From the balanced equation, the stoichiometry shows that 1 mole of PO4-3 reacts with 2 moles of HCl.
Therefore, moles of PO4-3 = (1/2) × 0.003452 mol = 0.001726 mol
Moles of phosphorus (P) in PO4-3:
Since PO4-3 contains 1 atom of phosphorus, moles of P = 0.001726 mol
Moles of P2O5:
From the balanced equation, the stoichiometry shows that 1 mole of PO4-3 corresponds to 1 mole of P2O5.
Therefore, moles of P2O5 = 0.001726 mol
Mass of P2O5:
Molar mass of P2O5 = 141.94 g/mol
Mass of P2O5 = moles of P2O5 × molar mass of P2O5
Mass of P2O5 = 0.001726 mol × 141.94 g/mol = 0.2449 g
% PO4-3:
% PO4-3 = (moles of PO4-3 / mass of sample) × 100
% PO4-3 = (0.001726 mol / 0.6637 g) × 100 = 0.2603%
% P2O5:
% P2O5 = (mass of P2O5 / mass of sample) × 100
% P2O5 = (0.2449 g / 0.6637 g) × 100 = 36.91%
Therefore, the amount of phosphorus present as % PO4-3 is 0.2603% and as % P2O5 is 36.91%.
Read more about Moles here:
https://brainly.com/question/15356425
#SPJ4
ssuming ideal behavior, which of the following aqueous solutions should have the highest boiling point? group of answer choices 0.50 m ca(no3)2 0.75 m nacl 0.75 m k2so4 1.00 m libr 1.25 m c6h12o6
The aqueous solution of 1.25 M [tex]C_6H_{12}O_6[/tex] should have the highest boiling point among the given options.
In this case, we need to compare the molality of solute particles in the given aqueous solutions to determine which one should have the highest boiling point.
Let's analyze the options:
0.50 M [tex]Ca(NO_3)_2[/tex]: Calcium nitrate Ca(NO_3)_2 dissociates into three ions in solution ([tex]Ca^{2+}[/tex] and two [tex]NO^{3-}[/tex]), resulting in a total of three solute particles.
0.75 M NaCl: Sodium chloride (NaCl) dissociates into two ions in solution (Na+ and Cl-), resulting in a total of two solute particles.
0.75 M [tex]K_2SO_4[/tex]: Potassium sulfate dissociates into three ions in solution (two K+ and one [tex]SO_4^{2-}[/tex]), resulting in a total of three solute particles.
1.00 M LiBr: Lithium bromide (LiBr) dissociates into two ions in solution (Li+ and Br-), resulting in a total of two solute particles.
1.25 M [tex]C_6H_{12}O_6[/tex]: Glucose ([tex]C_6H_{12}O_6[/tex]) does not dissociate into ions in solution and remains as individual molecules.
To learn more about boiling point click here https://brainly.com/question/31963619
#SPJ11
Amphoteric oxides exhibit both acidic and basic properties. True. False.
Answer: True
Explanation: When they react with an acid, they produce salt and water, showing basic properties. While reacting with alkalies they form salt and water showing acidic properties.
Hope this helps!
The statement "Amphoteric oxides exhibit both acidic and basic properties" is true because amphoteric oxides are oxides that can react with both acids and bases.
These oxides can act as either an acid or a base, depending on the substance they are reacting with. This property is due to the presence of both acidic and basic functional groups in the same molecule. When amphoteric oxides react with an acid, they behave as a base and neutralize the acid. They form salt and water in the process. On the other hand, when amphoteric oxides react with a base, they behave as an acid and neutralize the base. They form salt and water in this case as well.
Some common examples of amphoteric oxides include aluminum oxide ([tex]Al_{2} O_{3}[/tex]), zinc oxide (ZnO), and lead oxide (PbO). These oxides have the ability to react with both acids and bases and show both acidic and basic properties. In conclusion, amphoteric oxides have the ability to react with both acids and bases and exhibit both acidic and basic properties. This property makes them versatile compounds that can be used in various chemical reactions and processes.
Know more about Amphoteric oxides here :
https://brainly.com/question/30428526
#SPJ11
Identify which of the proposed syntheses will achieve the following transformation. ? Ph. Br Ph ОН 1) Mg 2) CO2 3) H30* 1 1) Mg 2) Å 3) HyCrO4 III 1) NaCN 2) H30* None of the options I and III only OI, II, and III I and II only II and III only
The proposed synthesis that will achieve the following transformation of Ph. Br to Ph ОН are I and III only.
To identify which of the proposed synthesis will achieve the transformation:
Option I:
1) Mg - This step forms a Grignard reagent.
2) CO2 - The Grignard reagent reacts with CO2 to form a carboxylate salt.
3) H3O* - The carboxylate salt is protonated to form a carboxylic acid.
Option II:
1) Mg - This step forms a Grignard reagent.
2) Å - This step is not clear, and no reaction can be identified.
3) H3CrO4 - This is a strong oxidizing agent, but without a clear previous step, the transformation cannot be determined.
Option III:
1) NaCN - This step involves nucleophilic substitution, replacing Br with CN.
2) H3O* - This step hydrolyzes the nitrile, converting it into a carboxylic acid.
Therefore, Considering the reactions, the synthesis that achieve the transformation are options I and III only.
To know more about synthesis refer here :
https://brainly.com/question/30332351
#SPJ11
while working in a lab, you are told to add 0.01396 ml of water to a solution you are preparing. what is this value in scientific notation?
In scientific notation, the value 0.01396 mL is expressed as 1.396 × 10⁻³ mL, where 1.396 is the coefficient and -3 is the exponent of 10.
To express a value in scientific notation, we need to write it as a number between 1 and 10 (inclusive) multiplied by a power of 10. Here's how we can convert 0.01396 mL to scientific notation;
Start by moving the decimal point to the right until you have a number between 1 and 10. Count the number of places you moved the decimal point.
0.01396 → 1.396 (moved the decimal point three places to the right)
The resulting number, 1.396, is between 1 and 10.
Next, determine the exponent of 10 by considering the number of places you moved the decimal point.
Since we moved the decimal point three places to the right, the exponent will be -3.
Combining the number and exponent, we can write the value in scientific notation;
0.01396 mL = 1.396 × 10⁻³ mL
In scientific notation, the value 0.01396 mL is expressed as 1.396 × 10⁻³ mL, where 1.396 is the coefficient and -3 is the exponent of 10. This notation allows us to represent very small or large numbers more efficiently.
To know more about scientific notation here
https://brainly.com/question/19625319
#SPJ4
T/F: the step in any reaction sequence determines the rate law for the overall reaction. this step is called the rate- step.
The step in any reaction sequence that determines the rate law for the overall reaction is called the rate-determining step. TRUE.
This step is also known as the slowest step in the reaction sequence. The rate law for the overall reaction is determined by the reactants and the rate-determining step. Therefore, it is important to identify the rate-determining step in order to determine the rate law for the overall reaction.
True, the step in any reaction sequence that determines the rate law for the overall reaction is called the rate-determining step. This step has the slowest rate among all the steps in the reaction sequence and thus governs the overall rate of the reaction.
Learn more about reaction sequence
brainly.com/question/29607707
#SPJ11
arrange CsBr NaCl and RbBr in increasing magnitude of lattice energy.
Please explain why.
According to the increasing magnitude of lattice energy, this is the right order of the given chemical compounds: NaCl < CsBr < RbBr
Understanding Lattice EnergyLattice Energy is a measure of the energy released when gaseous ions come together to form a solid lattice structure. It depends on the magnitude of the charges on the ions and the distance between them.
NaCl:
Sodium ion (Na+) has a charge of +1, and chloride ion (Cl-) has a charge of -1. Both ions are relatively small in size. The lattice energy of NaCl is moderate.
CsBr:
Cesium ion (Cs+) has a charge of +1, and bromide ion (Br-) has a charge of -1. Cesium ion is larger than sodium ion (Na+), and bromide ion is larger than chloride ion (Cl-). The larger size of the ions reduces the electrostatic attraction between them. As a result, the lattice energy of CsBr is lower than that of NaCl.
RbBr:
Rubidium ion (Rb+) has a charge of +1, and bromide ion (Br-) has a charge of -1. Rubidium ion is larger than both sodium ion (Na+) and cesium ion (Cs+), and bromide ion is larger than chloride ion (Cl-) and cesium ion (Cs+). The larger size of the ions in RbBr further weakens the electrostatic attraction, resulting in the lowest lattice energy among the three compounds.
Learn more about lattice energy here:
https://brainly.com/question/13397522
#SPJ1
a student titrated a 50.0 ml of 0.15 m glycolic acid with 0.50 m naoh. answer the following questions
Here are the answers to your questions:
1. What is the balanced chemical equation for this reaction? The balanced chemical equation for the reaction between glycolic acid (HA) and sodium hydroxide (NaOH) is: HA + NaOH → NaA + H2O where NaA is the sodium salt of glycolic acid (NaHA).
2. What is the initial number of moles of glycolic acid in the solution? To find the initial number of moles of glycolic acid in the solution, we need to use the formula: moles = concentration x volume where concentration is in units of moles per liter (M) and volume is in units of liters (L). Since the volume given in the problem is in milliliters (mL), we need to convert it to liters by dividing by 1000: volume = 50.0 mL / 1000 mL/L = 0.050 L Now we can plug in the values: moles of HA = concentration of HA x volume of HA moles of HA = 0.15 M x 0.050 L moles of HA = 0.0075 mol So the initial number of moles of glycolic acid in the solution is 0.0075 mol.
3. What is the volume of NaOH needed to reach the equivalence point? The equivalence point is the point at which all of the glycolic acid has reacted with the sodium hydroxide, so the moles of NaOH added must be equal to the moles of HA in the solution. We can use this fact to find the volume of NaOH needed to reach the equivalence point: moles of NaOH = moles of HA concentration of NaOH x volume of NaOH = moles of HA Solving for volume of NaOH: volume of NaOH = moles of HA / concentration of NaOH volume of NaOH = 0.0075 mol / 0.50 M volume of NaOH = 0.015 L or 15.0 mL So the volume of NaOH needed to reach the equivalence point is 15.0 mL. I hope that helps! Let me know if you have any other questions.
About sodium hydroxideSodium hydroxide, also known as lye and caustic soda or caustic soda, is an inorganic compound with the chemical formula NaOH. This compound is an ionic compound in the form of a white solid composed of the sodium cation Na⁺ and the hydroxide anion OH.
You can learn more about Sodium Hydroxide at https://brainly.com/question/30460434
#SPJ11
• calculate dssub for the sublimation of iodine in a closed container at 45 °c. i2(s) →i2(g) dhsub = 62.4 kj/mol. 196 j/molk
The answer is 196 J/(mol*K).
To calculate the entropy change for the sublimation (dissub) of iodine, we can use the equation:
dssub = (dhsub / T) + (deltavapS)
where dhsub is the enthalpy of sublimation, T is the temperature in Kelvin, and deltapvS is the entropy change due to the phase change.
Since iodine is subliming, we don't need to consider the vaporization entropy change.
We need to convert the temperature from Celsius to Kelvin:
T = 45°C + 273.15 = 318.15 K
Now we can calculate the entropy change for sublimation:
dssub = (62.4 kJ/mol / 318.15 K) = 196 J/(mol*K)
Therefore, the entropy change for sublimation of iodine at 45°C is 196 J/(mol*K).
To know more about dssub for the sublimation of iodine refer here
https://brainly.com/question/11808581#
#SPJ11
identify the least stable conformation for 1-tert-butyl-3-methylcyclohexane.
The least stable conformation for 1-tert-butyl-3-methylcyclohexane would be the twist-boat conformation where the tert-butyl and methyl groups are in axial positions, resulting in the maximum steric hindrance.
1-tert-butyl-3-methylcyclohexane is a cyclohexane ring with a tert-butyl group and a methyl group attached to it. To identify the least stable conformation, we need to consider the steric hindrance between the groups and their orientation.
One method to visualize different conformations is to use Newman projections, which show the molecule from the point of view of looking down the C-C bond.
For example, the Newman projection for 1-tert-butyl-3-methylcyclohexane in its most stable conformation would show the tert-butyl group in an equatorial position and the methyl group in an axial position. This is the most stable conformation because it minimizes the steric hindrance between the groups.
To identify the least stable conformation, we need to find the conformation that maximizes the steric hindrance. In this case, the tert-butyl group and the methyl group should be in axial positions to create the most steric hindrance.
This would result in a twist-boat conformation where the carbon atoms in the ring are no longer coplanar. This conformation is significantly less stable than the most stable conformation, which is a chair conformation, due to the increased steric hindrance.
For more question on conformation visit:
https://brainly.com/question/30579110
#SPJ11
Why are solar cells particularly suitable for developing countries?
Answer: They give energy without having to hire trained workers to manage power plants.
Explanation: You can just slap them on houses hook them up and there good for a month till you have to clean the dust off them which anyone can do.
Solar cells are particularly suitable for developing countries because they provide a sustainable and affordable source of energy.
Solar cells, also known as photovoltaic cells, are electronic devices that convert sunlight into electricity. They are made of semiconductor materials, such as silicon, and work by absorbing photons from sunlight.
By using solar cells, developing countries can improve access to electricity and reduce their reliance on fossil fuels.
Developing countries often lack access to reliable electricity, and solar cells can provide a solution to this problem. Solar cells are also easy to install and maintain, making them a practical option for developing countries.
In conclusion, solar cells are a great option for developing countries because they provide a sustainable, affordable, and practical source of energy.
Learn more about solar cells here:
https://brainly.com/question/29553595
#SPJ6
Ca(OH)2(s) ? Ca2+(aq) + 2OH-(aq)
Predict the expected shift, if any, caused by adding the various ions (Ca2+, Na+, Ag+, H+, OH-, NO3-) to a saturated calcium hydroxide solution?
The addition of Ca²⁺ and OH⁻ ions would not cause a shift in the equilibrium of the saturated calcium hydroxide solution, while the addition of Na⁺, H⁺, and NO₃⁻ ions would shift the equilibrium to the left, and the addition of Ag⁺ ions would cause a precipitation reaction.
In a saturated calcium hydroxide solution, the solid Ca(OH)₂ is in equilibrium with its ions in solution: Ca(OH)₂(s) ⇌ Ca²⁺(aq) + 2OH⁻(aq). The addition of Ca²⁺ and OH⁻ ions would not cause a shift in the equilibrium since they are already present in the solution.
The addition of Na⁺ ions, which are spectator ions and do not participate in the reaction, would increase the ionic strength of the solution and shift the equilibrium to the left. The addition of H⁺ ions, which would react with OH⁻ ions to form H₂O, and NO₃⁻ ions, which are spectator ions and do not participate in the reaction, would also shift the equilibrium to the left.
The addition of Ag⁺ ions, which have a low solubility product with OH⁻ ions, would cause a precipitation reaction and shift the equilibrium to the left.
To know more about precipitation reaction refer here:
https://brainly.com/question/29762381#
#SPJ11
How could you free a protein from a GPI anchor? You may choose more than one answer. O a high salt concentration wash (1 M NaCl) phospholipase C that removes the phosphoalcohol head group detergents to disrupt the membrane a high pH (9.0) bicarbonate wash O glycosylases that degrade the carbohydrate linkages
To free a protein from a GPI anchor, one could use a combination of detergents to disrupt the membrane, as well as a high pH (9.0) bicarbonate wash.
Phospholipase C can also be used to remove the phosphoalcohol head group, and glycosylases can degrade the carbohydrate linkages. However, a high salt concentration wash (1 M NaCl) is not typically effective for releasing proteins from GPI anchors.
Phospholipase C is an enzyme that cleaves the phosphoalcohol head group from the GPI anchor, releasing the protein from the cell membrane. This method is often used in research labs to free a protein from its GPI anchor.
Detergents are amphipathic molecules that can disrupt cell membranes and solubilize membrane proteins. In the case of a protein with a GPI anchor, detergents can be used to solubilize the membrane and release the protein from the anchor. High salt concentration wash, high pH (9.0) bicarbonate wash, and glycosylases that degrade the carbohydrate linkages are not effective methods to free a protein from a GPI anchor.
Therefore, To free a protein from a GPI anchor use a combination of detergents to disrupt the membrane, as well as a high pH (9.0) bicarbonate wash. Phospholipase C can also be used to remove the phosphoalcohol head group, and glycosylases can degrade the carbohydrate linkages.
To know more about Protein refer here :
https://brainly.com/question/29633638
#SPJ11
If you dissolve 20 mL of flavor crystals into 250 mL of water to make lemonade, what volume of lemonade do you expect to have? Why? (1 point) You would expect to have about A 250 mL of lemonade. There is empty space between water molecules. The flavor crystals fill in the empty spaces rather than increasing the total amount of space taken up by the solution. B You would expect to have 230 mL of lemonade. The total volume of lemonade will be less than the starting volume of water. Dissolving the flavor crystals reduces the amount of matter. C You would expect to have 270 mL of lemonade. The total volume is the sum of 20 mL of flavor crystals and 250 mL of water. D You would expect to have 270 mL of lemonade. The total volume of lemonade does not change at all. There is empty space between water molecules. The flavor crystals fill in the empty spaces, rather than increasing the total amount of space taken up by the solution
C) You would expect to have 270 mL of lemonade.
The total volume is the sum of 20 mL of flavor crystals and 250 mL of water.
When you dissolve the flavor crystals into the water, the volume of the water does not change. The flavor crystals mix with the water and occupy the same space. Therefore, the total volume of the lemonade will be the sum of the volume of the flavor crystals (20 mL) and the volume of the water (250 mL), resulting in 270 mL of lemonade.
It's important to note that when substances dissolve in a solvent, they typically do not change the overall volume of the solution. The dissolved particles become dispersed throughout the solvent, occupying the same volume as the solvent itself.
To know more about Volume related question visit:
https://brainly.com/question/17322215
#SPJ11
arrange the following compounds in order of decreasing boiling point, putting the compound with the highest boiling point first. a) I > II > III. b) I > III > II. c) III > I > II. d) III > II > I.
The correct order of decreasing boiling points is: I > III > II. The closest answer choice is b) I > III > II.
The order of boiling points of the given compounds can be determined by analyzing their intermolecular forces, which are influenced by the molecular weight, polarity, and ability to form hydrogen bonds.
I. CH3CH2CH2CH2NH2 (1-amino-butane): This compound can form hydrogen bonds between the NH2 group and the adjacent molecules, and it also has a higher molecular weight than the other two compounds, which increases its boiling point.
II. CH3CH2OCH2CH3 (diethyl ether): This compound is polar due to the oxygen atom, but it cannot form hydrogen bonds, which reduces its boiling point compared to compound I.
III. CH3CH2CH2CH2OH (1-butanol): This compound is also polar and can form hydrogen bonds, but its molecular weight is lower than that of compound I, which reduces its boiling point.
For more question on boiling points click on
https://brainly.com/question/29233996
#SPJ11
correct question
arrange the following compounds in order of decreasing boiling point, putting the compound with the highest boiling point first.
I. CH3CH2CH2CH2NH2
II. CH3CH2OCH2CH3
III. CH3CH2CH2CH2OH
a) I > II > III.
b) I > III > II.
c) III > I > II.
d) III > II > I.
dennis’s b cells expressed igd as well as igm on their surface. why did he not have any difficulty in isotype switching from igm to igd?
Dennis's ability to switch from IgM to IgD despite expressing both on his B cells is due to the fact that isotype switching occurs independently of the expression of IgM and IgD on the B cell surface. Isotype switching is mediated by specific DNA recombination events that result in the replacement of the constant region of one immunoglobulin isotype (e.g., IgM) with that of another isotype (e.g., IgD). These DNA recombination events occur at specific switch regions within the heavy chain gene locus. Therefore, the expression of both IgM and IgD on Dennis's B cells did not interfere with his ability to undergo isotype switching.
learn more about specific DNA recombination
https://brainly.com/question/28434245?referrer=searchResults
#SPJ11
cao has a face-centered cubic unit cell in which the o2- anions occupy corners and face centers, while the cations fit into the hole between adjacent anions. what is the radius of ca2 if the ionic radius of o2- is 140.0 pm and the density of cao is 3.300 g/cm3?
The radius of Ca²⁺ is approximately 100.7 pm.
What is the face-centered cubic?In a face-centered cubic (FCC) unit cell of CaO, the anions (O²⁻) occupy the corners and face centers, while the cations (Ca²⁺) fit into the holes between adjacent anions.
In an FCC unit cell, the radius ratio of the cation (Ca²⁺) to the anion (O²⁻) can be determined using the formula:
Radius ratio = (radius of cation) / (radius of anion)
Given the ionic radius of O²⁻ as 140.0 pm, we can calculate the radius ratio as follows:
Radius ratio = (radius of Ca²⁺) / (radius of O²⁻)
Radius ratio = (radius of Ca²⁺) / 140.0 pm
Now, to find the radius of Ca²⁺, we need to consider the packing efficiency of the FCC structure. For FCC, the packing efficiency is 74%, which means the atoms occupy 74% of the unit cell volume.
Given the density of CaO as 3.300 g/cm³, we can calculate the volume of the unit cell using the formula:
Density = (mass of unit cell) / (volume of unit cell)
Since the unit cell contains one Ca²⁺ and two O²⁻ ions, the mass of the unit cell is the sum of their atomic masses.
Using the known values, we can determine the volume of the unit cell. Dividing this volume by the number of atoms in the unit cell (4), we can find the volume occupied by one Ca²⁺ ion.
Finally, using the volume of one Ca²⁺ ion, we can calculate its radius using the formula:
Volume = (4/3) * π * (radius of Ca²⁺)³
Therefore, after performing the calculations, the radius of Ca²⁺ is approximately 100.7 pm.
To know more about density, refer here:
https://brainly.com/question/15164682#
#SPJ4
Do these look correct?
1. 214/84 ----> 4/2α + 210/82Pb - Alpha emission
2. 253/99 Es + 4/2He ----> 1/0 n + 256/101Md - Artificial transmutation
3. 214/84 ----> 0/-1β + 214/85 At - Beta emission
What is the type of radioactive decay?Since radioactive decay is a random process, it is impossible to anticipate when any given decay event will occur. But a significant number of radioactive atoms decay in a predictable manner that is known as a decay curve. Half-life, or how long it takes for half of a radioactive sample to transform into a more stable form, is a measure of the decay rate.
There are several uses for radioactive decay, including radiometric dating to establish the age of rocks and fossils, radioisotope-based medical imaging and treatments,
Learn more about radioactive decay:https://brainly.com/question/1770619
#SPJ1