The solution to the integral is ∫ (16x-130) / (x²-16x+63) dx = -ln|x-9| + 41ln|x-7| + C
Now, let's get into the details of the problem. We are given the integral:
∫ (16x-130) / (x²-16x+63) dx
To solve this integral, we first need to factor the denominator. We can factor it using the quadratic formula, which gives us:
x²-16x+63 = (x-9)(x-7)
Therefore, we can rewrite the integral as:
∫ (16x-130) / [(x-9)(x-7)] dx
To apply this technique, we need to first write the fraction as:
(16x-130) / [(x-9)(x-7)] = A/(x-9) + B/(x-7)
where A and B are constants that we need to find. We can find A and B by multiplying both sides by the common denominator and then equating the numerators. This gives us:
16x - 130 = A(x-7) + B(x-9)
Now, we can solve for A and B by substituting values of x that make one of the terms zero. For example, if we substitute x=9, we get:
16(9) - 130 = A(9-7) + B(9-9)
Simplifying this expression gives us:
2A = -2
Therefore, A = -1.
Similarly, if we substitute x=7, we get:
16(7) - 130 = A(7-7) + B(7-9)
Simplifying this expression gives us:
-2B = -82
Therefore, B = 41.
Now that we have found A and B, we can rewrite the original fraction as:
(16x-130) / [(x-9)(x-7)] = -1/(x-9) + 41/(x-7)
Using this decomposition, we can integrate the original function by integrating each term separately. This gives us:
∫ (16x-130) / [(x-9)(x-7)] dx = ∫ [-1/(x-9) + 41/(x-7)] dx
= -ln|x-9| + 41ln|x-7| + C
where C is the constant of integration.
To know more about integral here
https://brainly.com/question/18125359
#SPJ4
Jenny packaged 108 eggs in carton. Write this statement as a rate
The rate at which Jenny packaged eggs in cartons is 108 eggs per carton.
The given statement can be expressed as a rate by dividing the number of eggs packaged by the number of cartons used. In this case, Jenny packaged 108 eggs in a carton. Therefore, the rate can be stated as 108 eggs per carton.
A rate is a comparison between two quantities measured in different units. It specifies how one quantity changes in relation to the other. In this scenario, the quantity being measured is the number of eggs, and the units are eggs and cartons. By dividing the number of eggs (108) by the number of cartons (1), we find that Jenny packaged 108 eggs in one carton. This means that for every carton she used, there were 108 eggs in it. Thus, the rate at which Jenny packaged eggs can be expressed as 108 eggs per carton. This rate indicates that on average, each carton contains 108 eggs, providing a measure of the quantity of eggs Jenny packages in each carton.
Learn more about rate here:
https://brainly.com/question/29781084
#SPJ11
What is the length of the arc shown in red?
An arc only exists on the outside, or the circumference of a circle. To find the length of this arc, we need to find the part of the circumference which this arc covers. The part is given in the problem: 45 out of 360 degrees.
Circumference = 2 x radius x pi
Circumference = 2 x 18 x pi
Circumference = 36pi
Now, we only need 45/360 or 1/8 of the total circumference.
1/8 of 36pi = 9pi/2 or 4.5 pi
Answer: 9pi / 2 or 4 1/2 pi or 4.5pi cm
Hope this helps!
Let d, f, and g be defined as follows.d: {0, 1}4 → {0, 1}4. d(x) is obtained from x by removing the second bit and placing it at the end. For example, d(1011) = 1110.f: {0, 1}4 → {0, 1}4. f(x) is obtained from x by replacing the last bit with 1. For example, f(1000) = 1001.g: {0, 1}4 → {0, 1}3. g(x) is obtained from x by removing the first bit. For example, g(1000) = 000.(a) What is d-1(1001)?(c) What is the range of g ο f?
a) The value of d⁻¹(1001) = 0110.
b) As the function, g ο f is not well-defined.
c) The resulting set is {001, 101, 001, 101, 011, 111, 011, 111}, which is the range of g ο f.
d) The value of (f ο d)(1011) = 1111.
(a) d⁻¹(1001) is asking us to find the input value of d that would produce the output 1001. Since d removes the second bit and places it at the end,
=> d(1001) = 0110.
Therefore, d⁻¹(1001) = 0110.
(b) The composition of functions f and g, denoted as f ο g, means applying function g first and then function f.
In this case, f's range is {0001, 1001, 0101, 1101, 0011, 1011, 0111, 1111}, which is a subset of g's domain. Therefore, f ο g is well-defined.
However, g's range is {000, 001, 010, 011, 100, 101, 110, 111}, which is not a subset of f's domain. Therefore, g ο f is not well-defined.
(c) The range of g ο f is the set of all possible outputs when we apply f first and then g. To find the range of g ο f, we need to evaluate all possible inputs of f and apply g to the output.
Since f's range is
=> {0001, 1001, 0101, 1101, 0011, 1011, 0111, 1111},
we can apply g to each element to get the range of g ο f.
The resulting set is {001, 101, 001, 101, 011, 111, 011, 111}, which is the range of g ο f.
(d) To evaluate (f ο d)(1011), we first apply d to 1011 to get 1110, and then we apply f to 1110 to get 1111.
Therefore, (f ο d)(1011) = 1111.
To know more about function here
https://brainly.com/question/28193995
#SPJ4
Let a and b be natural numbers and gcd(a, b)=d. Prove that for every natural number n, gcd(an, bn)=dn.
Based on the information, dn is a common divisor of an and bn, and it is also the greatest common divisor.
How to explain the informationSince k is a divisor of an, we have an = kp for some natural number p.
Similarly, bn = kq for some natural number q.
Substituting these values into the equations for an and bn:
an = (dr)n = dnr
bn = (ds)n = dns
Since k is a common divisor of an and bn, we have:
dnr = kp ... (1)
dns = kq ... (2)
Now, let's consider equation (1). Since d divides k, we can write k = dl for some natural number l.
Substituting this into equation (1):
dnr = dlp
nr = lp
Since n and r are natural numbers, lp is also a natural number. Therefore, n divides lp.
Similarly, equation (2) gives us:
dns = dls
ns = ls
Again, since n and s are natural numbers, ls is also a natural number. Therefore, n divides ls.
In conclusion, we have shown that dn is a common divisor of an and bn, and it is also the greatest common divisor. Thus, we have proven that gcd(an, bn) = dn for every natural number n, given gcd(a, b) = d.
Learn more about division on
https://brainly.com/question/30126004
#SPJ4
1. (7 points) Evaluate the integral by changing to polar coordinates. ∬Rarctan(y/x)dA, where R={(x,y):1≤x^2+y^2≤4,0≤y≤x}
The exact value of this integral may require advanced techniques or numerical methods, but the integral has been successfully transformed into polar coordinates.
To evaluate the integral ∬R arctan(y/x) dA using polar coordinates, we first need to convert the given rectangular region R and the integrand into polar form. The region R can be represented as 1≤r²≤4, which implies 1≤r≤2, and 0≤θ≤π/4. The integrand arctan(y/x) in polar form becomes arctan(rsinθ/(rcosθ)) or arctan(tanθ). The dA term in polar coordinates is r dr dθ.
Now we have the integral in polar coordinates:
∬R arctan(y/x) dA = ∫(θ=0 to π/4) ∫(r=1 to 2) arctan(tanθ) × r dr dθ
Evaluate the integral with respect to r first:
∫(θ=0 to π/4) [0.5r² arctan(tanθ)] (from r=1 to 2) dθ = ∫(θ=0 to π/4) (2arctan(tanθ) - 0.5arctan(tanθ)) dθ
Next, evaluate the integral with respect to θ:
∫(θ=0 to π/4) (1.5arctan(tanθ)) dθ
Learn more about implies here:
https://brainly.com/question/24267568
#SPJ11
Let A be a n x n matrix and let B = I - 2A + A²
a.) Show that if x is an eigenvector of A belonging to an eigenvalue α of A, then x is also an eigenvector of B belonging to an eigenvalue µ of B. How are ? and µ related?
b.) Show that if α = 1 is an eigenvalue of A, then the matrix B will be singular.NOTE - α was originally supposed to be Mu, but the symbol isnt supported.
a. x is an eigenvector of B belonging to an eigenvalue µ = (1 - 2α + α²) of B. b. x is an eigenvector of B belonging to an eigenvalue µ = 0 of B. Since B has a zero eigenvalue, it is singular.
a) Let x be an eigenvector of A belonging to an eigenvalue α of A, then we have:
Ax = αx
Multiplying both sides by A and rearranging, we get:
A²x = αAx = α²x
Now, substituting (I - 2A + A²) for B, we have:
Bx = (I - 2A + A²)x = Ix - 2Ax + A²x
= x - 2αx + α²x (using Ax = αx and A²x = α²x)
= (1 - 2α + α²)x
So, x is an eigenvector of B belonging to an eigenvalue µ = (1 - 2α + α²) of B.
b) If α = 1 is an eigenvalue of A, then we have:
Ax = αx = x
Multiplying both sides by A and rearranging, we get:
A²x = A(x) = α(x) = x
Now, substituting (I - 2A + A²) for B, we have:
Bx = (I - 2A + A²)x = Ix - 2Ax + A²x
= x - 2x + x (using Ax = x and A²x = x)
= 0
So, x is an eigenvector of B belonging to an eigenvalue µ = 0 of B. Since B has a zero eigenvalue, it is singular.
Learn more about eigenvector here
https://brainly.com/question/12969229
#SPJ11
AMS and ENR are congruent triangles. What is the value of x in angle E? Show and explain your work.
The value of x in the angle E is 19.
We have,
Since the triangles are congruent.
Corresponding sides and angles are equal.
This means,
112 = 16x
Solve for x.
112 = 6x
x = 112/6
x = 18.66
x = 18.7
Rounding to the nearest whole number.
x = 19
Thus,
The value of x in the angle E is 19.
Learn more about angles here:
https://brainly.com/question/7116550
#SPJ1
Suppose that X has a hypergeometric distribution with N = 100, n = 4, and K = 20. Determine the following: (a) P(X = 1) (b) P(X = 6) (c) P(X = 4) (d) Mean and variance of X
The variance of the number of items of the particular type in a sample of 4 is approximately 0.674.
The hypergeometric distribution is used when we have a finite population and we sample without replacement. In this case, we have a population of size N = 100, and we sample n = 4 items from it. We are interested in the number of items that are of a particular type K = 20.
The probability mass function (PMF) of the hypergeometric distribution is given by:
P(X = k) = [K choose k] [N-K choose n-k] / [N choose n]
where [a choose b] denotes the binomial coefficient, which is the number of ways of choosing b items from a set of a items.
(a) P(X = 1)
Using the formula above, we get:
P(X = 1) = [20 choose 1] [80 choose 3] / [100 choose 4] ≈ 0.371
Therefore, the probability that exactly 1 item out of 4 is of the particular type is approximately 0.371.
(b) P(X = 6)
Since there are only 4 items being sampled, it is impossible to have 6 items of a particular type. Therefore, P(X = 6) = 0.
(c) P(X = 4)
Using the formula above, we get:
P(X = 4) = [20 choose 4] [80 choose 0] / [100 choose 4] ≈ 0.00035
Therefore, the probability that all 4 items are of the particular type is approximately 0.00035.
(d) Mean and variance of X
The mean of the hypergeometric distribution is given by:
μ = nK / N
Substituting the given values, we get:
μ = 4 × 20 / 100 = 0.8
Therefore, the mean number of items of the particular type in a sample of 4 is 0.8.
The variance of the hypergeometric distribution is given by:
σ^2 = nK(N-K)(N-n) / N^2(n-1)
Substituting the given values, we get:
σ^2 = 4 × 20 × 80 × 96 / 100^2 × 3 ≈ 0.674
Learn more about probability at: brainly.com/question/32004014
#SPJ11
find the power series for x4 1−3x2 centered at 0 and state the interval of convergence.
The interval of convergence for the power series is -1/√R < x < 1/√R.
To find the power series representation for the function f(x) = x^4 / (1 - 3x^2), centered at x = 0, we can start by using the geometric series expansion. Recall that for a geometric series with a common ratio r, the sum of the series is given by:
S = a / (1 - r),
where "a" is the first term of the series. In our case, we have:
f(x) = x^4 / (1 - 3x^2) = x^4 * (1 + 3x^2 + (3x^2)^2 + (3x^2)^3 + ...).
We can rewrite this as:
f(x) = x^4 + 3x^6 + 9x^8 + 27x^10 + ...
Now, we have the power series representation of f(x) centered at x = 0.
Next, let's determine the interval of convergence. To do this, we can consider the radius of convergence, which is given by:
R = 1 / lim (n->∞) |a_(n+1) / a_n|,
where a_n is the coefficient of x^n in the power series.
In our case, the coefficients are increasing powers of x, so the ratio |a_(n+1) / a_n| simplifies to |x|^2. Taking the limit as n approaches infinity, we have:
R = 1 / lim (n->∞) |x|^2 = 1 / |x|^2.
For the series to converge, the absolute value of x must be less than the radius of convergence. Therefore, the interval of convergence is |x|^2 < R, which can be rewritten as:
-√R < x < √R.
Substituting R = 1 / |x|^2, we have:
-1/√R < x < 1/√R.
Thus, the interval of convergence for the power series is -1/√R < x < 1/√R.
To learn more about convergence
https://brainly.com/question/30089745
#SPJ11
Which of the following statements is not true regarding a robust statistic:
Question 10 options:
a) A statistical inference procedure is called robust if the probability calculations required are insensitive to violations of the assumptions made
b) The t procedures are not robust against outliers
c) t procedures are quite robust against nonnormality of the population where no outliers are present and the distribution is roughly symmetric
d) The two-sample t procedures are more robust than the one-sample t methods especially when the distributions are not symmetric
The statement that is not true is "The two-sample t procedures are more robust than the one-sample t methods especially when the distributions are not symmetric". That is option (d)
Understanding Robust StatisticsThe statement given in Option (d) above is incorrect because the two-sample t procedures are generally considered less robust than the one-sample t methods, especially when the distributions are not symmetric.
This is because the two-sample t procedures require the assumption that the two populations have equal variances, and this assumption is often violated in practice. In contrast, the one-sample t methods only require the assumption of normality, and are more robust in the presence of outliers or non-normality.
To summarize the other statements given above:
a) A statistical inference procedure is called robust if the probability calculations required are insensitive to violations of the assumptions made - This is a true statement that defines the concept of robustness.
b) The t procedures are not robust against outliers - This is a true statement that highlights the sensitivity of t procedures to outliers.
c) t procedures are quite robust against nonnormality of the population where no outliers are present and the distribution is roughly symmetric - This is a true statement that highlights the robustness of t procedures to non-normality when the sample is roughly symmetric and there are no outliers.
Learn more about robust statistics here:
https://brainly.com/question/15966631
#SPJ1
At a large district court, Assistant District Attorneys (ADAs) are paid by the hour. Data from the
personnel office show that mean hourly wages paid to ADAs is $52 with a standard deviation of
$5. 50.
Determine the probability that an ADA will earn between $50 and $60 per hour.
Show your calculations.
To determine the probability that an ADA will earn between $50 and $60 per hour, we can use the standard normal distribution and the z-score.
Given:
Mean (μ) = $52
Standard deviation (σ) = $5.50
To find the probability, we need to calculate the z-scores for the lower and upper limits, and then use the z-table or a calculator to find the corresponding probabilities.
Step 1: Calculate the z-scores
For the lower limit of $50:
z_lower = (X_lower - μ) / σ = (50 - 52) / 5.50
For the upper limit of $60:
z_upper = (X_upper - μ) / σ = (60 - 52) / 5.50
Step 2: Look up the probabilities from the z-table or use a calculator
Using the z-table or a calculator, we can find the probabilities corresponding to the z-scores.
Let's denote the probability for the lower limit as P1 and the probability for the upper limit as P2.
Step 3: Calculate the final probability
The probability that an ADA will earn between $50 and $60 per hour is the difference between P2 and P1.
P(X_lower < X < X_upper) = P2 - P1
Note: Make sure to use the cumulative probabilities (area under the curve) from the z-table or calculator.
I will perform the calculations using the given mean and standard deviation to find the probabilities. Please hold on.
Learn more about probability here:
https://brainly.com/question/31740607
#SPJ11
There are 15 different marbles and 3 jars. Suppose you are throwing the marbles in the jars and there is a 20%, 50% and 30% chance of landing a marble in jars 1, 2 and 3, respectively. Note: Stating the distribution and parameters will give you 4 points out of the 7. a. (7 pts) What is the probability of landing 4, 6 and 5 marbles in jars 1, 2 and 3 respectively? b. (7 pts) Suppose that out of the 15 marbles 7 are red and 8 are blue. If we randomly select a sample of size 5, what is the probability that we will have 3 blue marbles? C. (7 pts) Suppose we will throw marbles at the jars, until we have landed three (regardless of color) in jar 1. What is the probability that we will need to throw ten marbles to achieve this?
Answer: The probability of needing to throw ten marbles to achieve three landings in jar 1 is approximately 14.0%.
Step-by-step explanation:
a. To calculate the probability of landing a specific number of marbles in each jar, we need to use the multinomial distribution. Let X = (X1, X2, X3) be the random variable that represents the number of marbles in jars 1, 2, and 3, respectively. Then X follows a multinomial distribution with parameters n = 15 (total number of marbles) and p = (0.2, 0.5, 0.3) (probabilities of landing in jars 1, 2, and 3, respectively).The probability of landing 4, 6, and 5 marbles in jars 1, 2, and 3, respectively, can be calculated as:P(X1 = 4, X2 = 6, X3 = 5) = (15 choose 4,6,5) * (0.2)^4 * (0.5)^6 * (0.3)^5
= 1,539,615 * 0.0001048576 * 0.015625 * 0.00243
= 0.00679
Therefore, the probability of landing 4 marbles in jar 1, 6 marbles in jar 2, and 5 marbles in jar 3 is approximately 0.68%.b. We can use the hypergeometric distribution to calculate the probability of selecting a specific number of blue marbles from a sample of size 5 without replacement. Let X be the random variable that represents the number of blue marbles in the sample. Then X follows a hypergeometric distribution with parameters N = 15 (total number of marbles), K = 8 (number of blue marbles), and n = 5 (sample size).The probability of selecting 3 blue marbles can be calculated as:
P(X = 3) = (8 choose 3) * (15 - 8 choose 2) / (15 choose 5)
= 56 * 21 / 3003
= 0.392
Therefore, the probability of selecting 3 blue marbles from a sample of size 5 is approximately 39.2%.c. Let Y be the random variable that represents the number of marbles needed to achieve three landings in jar 1. Then Y follows a negative binomial distribution with parameters r = 3 (number of successes needed) and p = 0.2 (probability of landing in jar 1).The probability of needing to throw ten marbles to achieve three landings in jar 1 can be calculated as:
P(Y = 10) = (10 - 1 choose 3 - 1) * (0.2)^3 * (0.8)^7
= 84 * 0.008 * 0.2097152
= 0.140
Therefore, the probability of needing to throw ten marbles to achieve three landings in jar 1 is approximately 14.0%.
Learn more about probability here, https://brainly.com/question/25839839
#SPJ11
suppose you rotate a 1000 turn, 18 cm diameter coil in the earth’s 5.00 × 10-5 t magnetic field.
When you rotate a 1000 turn, 18 cm diameter coil in the earth's [tex]5.00 * 10^(-5)[/tex]T magnetic field, an electromotive force (EMF) is induced in the coil due to the change in the magnetic field as the coil rotates.
The amount of EMF induced depends on the rate of change of the magnetic field and the number of turns in the coil. This phenomenon is known as electromagnetic induction. The direction of the induced EMF is given by Fleming's right-hand rule.
A magnet or an electric current is surrounded by a magnetic field, which is a force field. Since it is a vector field, it has both magnitude and direction. Its magnitude is expressed in teslas (T) or gauss (G) units. Electron mobility generates magnetic fields, which have the power to exert forces on other electrically charged particles like moving charged particles or magnetic materials. Electric motors, magnetic storage systems, medical imaging, and particle accelerators are just a few of the many applications for magnetic fields. They are crucial to the study of engineering and physics, as well.
Learn more about magnetic field here:
https://brainly.com/question/23096032
#SPJ11
a normal distribution has a mean of µ = 40 with σ = 8. if one score is randomly selected from this distribution, which is the probability that the score will be less than x = 34?
The probability of randomly selecting a score less than x = 34 from a normal distribution with a mean of µ = 40 and a standard deviation of σ = 8 is approximately 0.2266, or 22.66%.
First, we need to standardize the value of 34 using the formula for standardization:
Z = (x - µ) / σ
Where:
Z is the standard score or z-score,
x is the value of interest,
µ is the mean of the distribution, and
σ is the standard deviation of the distribution.
Plugging in the values, we get:
Z = (34 - 40) / 8 = -0.75
Now that we have the z-score, we can look up the corresponding probability from the standard normal distribution table or use statistical software. The standard normal distribution has a mean of 0 and a standard deviation of 1.
By looking up the z-score of -0.75 in the standard normal distribution table or using software, we find that the corresponding probability is approximately 0.2266. This means that there is a probability of 0.2266, or 22.66%, of randomly selecting a score less than 34 from the given normal distribution.
Alternatively, you can use software or a graphing calculator to directly calculate the probability using the standard normal distribution function. In this case, you would use the formula:
P(Z < -0.75) = Φ(-0.75)
Where Φ represents the cumulative distribution function (CDF) of the standard normal distribution. By evaluating this expression, you would get the same result of approximately 0.2266.
To know more about probability here
https://brainly.com/question/11234923
#SPJ4
1. Mr. W operates a small restaurant at Berkeley. Due to the pandemic, customers can only take out the foods through walk-in service. Once a customer arrives, an order will be placed immediately and the cooks of the restaurant will process orders in a first come first serve pattern. After an order is finished by a cook, the customer will pick up the food and leave immediately. During the time the food is prepared, a customer waits in the restaurant. For simplicity, we assume this restaurant opens 24 hours every day and customers arrive to the restaurant according to a Poisson process with constant rate 20 per hour. The cooking time for each order is exponentially distributed with rate 10 per hour. Each cook in the restaurant can only process one order at one time. Each cook works independently. The time it takes to place an order is considered to be negligible (e.g., through mobile apps or kiosks) and is not counted in the model. Consider a continuous time stochastic process {X(t):t> 0} where X(t) is the number of customers in the restaurant at time t. a.) Suppose that there is only one cook in the restaurant. When an customer arrives at the restaurant, she has a probability of immediately leaving the restaurant without placing an order at all. This probability is n/(n +1) if there are already n customers in the restaurant. Find the invariant distribution of the number of customers in the restaurant. b.) Suppose there are now 2 cooks in the restaurant. When an customer arrives at the restaurant, she immediately leaves the restaurant without placing an order at all, if the restaurant already has 5 customers. Otherwise the customer stays and places an order. In equilibrium, what is the fraction of arriving customers that will leave immediately?
For one cook, the invariant distribution is given by π_n = (1/2)ⁿ for n ≥ 0. For two cooks and a maximum of 5 customers, the fraction of arriving customers that leave immediately in equilibrium is approximately 0.361.
a.) For one cook, we can solve for the invariant distribution using the balance equations. For n ≥ 1, we have λπ_n = μπ_(n-1), where λ = 20 (arrival rate) and μ = 10 (service rate). Solving these equations, we find π_n = (1/2)ⁿ for n ≥ 0.
b.) For two cooks, we use a similar approach but with a maximum of 5 customers. Let ρ = λ/(2μ) = 1/2. We calculate the probabilities of the states 0, 1, 2, 3, 4, and 5 using the Erlang loss formula:
π_0 = 1/(1 + 2ρ + 2ρ² + 2ρ³ + 2ρ⁴ + ρ⁵),
π_n = 2ρⁿπ₀ for n = 1, 2, 3, 4,
π_5 = ρ⁵π₀.
The fraction of arriving customers that leave immediately is given by π_5, which is approximately 0.361.
To know more about Erlang loss click on below link:
https://brainly.com/question/31791182#
#SPJ11
you are given that tan(a)=3 and tan(b)=6. find tan(a−b). give your answer as a fraction.
Tan(a-b) thus equals -3/19 The angle a-b is in the second quadrant according to the negative sign.
To find tan(a-b), we need to use the trigonometric identity tan(a-b) = (tan(a)-tan(b))/(1+tan(a)tan(b)). We are given that tan(a) = 3 and tan(b) = 6, so we can substitute those values into the formula.
tan(a-b) = (tan(a)-tan(b))/(1+tan(a)tan(b))
tan(a-b) = (3-6)/(1+(3*6))
tan(a-b) = (-3)/(1+18)
tan(a-b) = (-3/19)
Therefore, tan(a-b) = -3/19. We express this as a fraction because the question asks for the answer as a fraction. The negative sign indicates that the angle a-b is in the second quadrant.
To learn more about : Tan(a-b)
https://brainly.com/question/31006872
#SPJ11
A fraction represents a part or more of a whole, the majority of equal parts. Therefore, Tan(a-b) thus equals -3/19 The angle a-b is in the second quadrant according to the negative sign.
Given that tan (a) = 3 and tan (b) = 6,
tan(a-b) = -3/19 as a fraction.
A fraction represents a part or more of a whole, the majority of equal parts. In modern English, a fraction describes how many parts of a small quantity, such as one-half, eight-fifths, or three-quarters. An example, profanity or simplicity usually has the number shown above on a line, and the number is not below (or after) the lines. Numerals and numbers are also used in very few fractions, including compounds, numbers, and composite numbers.
We are given that tan(a) = 3 and tan(b) = 6. To find tan(a-b), we will use the tangent subtraction formula:
tan(a-b) = (tan(a) - tan(b)) / (1 + tan(a)tan(b))
Now, let's substitute the given values into the formula:
Substituting the given values, we get:
tan(a-b) = (3 - 6) / (1 + 3 * 6)
tan(a-b) = (-3) / (1 + 18)
tan(a-b) = -3 / 19
So, tan(a-b) = -3/19.
Learn more about Fraction:
brainly.com/question/10354322
#SPJ11
A genetic experiment involving peas yielded one sample of offspring consisting of 405 green peas and 138 yellow peas. Use a 0.05 significance level to test the claim that under the same circumstances, 27% of offsprinig peas will be yellow. Identify the null hypothesis, alterrnative hypothesis, test statistic, P-value, conclusion about the null hypothesis, and final conclusion that addresses the original claim. Use the P-value method and the normal distribution as an approximation to the binomial distribution.A) what are the hypotheses? alternative hypothesis?B) Identify the test statistict=?C) Identify the P-value___ (round to four decimal places as needed)D) Identify the critical value(s)The critical value(s) is (are)___(round to three decimal places as needed. Use a comma to seperate as needed)
A genetic experiment with peas resulted in 138 yellow and 405 green peas. The null hypothesis was rejected at the 0.05 level, concluding that the proportion of yellow peas is different from 27%. The test statistic was -1.7524 and the p-value was 0.0791. The critical values were -1.96 and 1.96.
The null hypothesis is that the proportion of yellow peas is equal to 0.27, and the alternative hypothesis is that the proportion of yellow peas is not equal to 0.27.
The test statistic is the z-score, which is calculated as z = (P - p) / √(p(1-p)/n), where P is the sample proportion, p is the hypothesized proportion, and n is the sample size.
The P-value for the two-tailed test is calculated as P(Z ≤ -z) + P(Z ≥ z), where z is the absolute value of the calculated z-score. Using a significance level of 0.05, the critical z-value is ±1.96.
The sample proportion of yellow peas is P = 138 / (405 + 138) ≈ 0.2543. The calculated z-score is z = (0.2543 - 0.27) / √(0.27 * 0.73 / 543) ≈ -1.7524. The P-value is P(Z ≤ -1.7524) + P(Z ≥ 1.7524) ≈ 0.0791.
The critical values for a two-tailed test with a significance level of 0.05 are ±1.96. Since the calculated z-score of -1.7524 is less than the critical value of -1.96, we fail to reject the null hypothesis.
Therefore, there is not enough evidence to conclude that the proportion of yellow peas is different from 0.27. The final conclusion is that the data do not support the claim that under the same circumstances, 27% of offspring peas will be yellow.
To know more about Null hypothesis:
https://brainly.com/question/28920252
#SPJ4
A student tries to fit a linear model to a set of data obtained in a chemistry experiment. His instructor says his model is incorrect, and suggests that the student try a quadratic model. The instructor may have known that the linear model is incorrect because the residual plot
A residual plot is a type of plot that is useful in assessing whether or not a linear regression model is appropriate for a set of data. The plot shows the residuals on the vertical axis and the independent variable on the horizontal axis. If the plot shows a pattern, then it indicates that the model is not appropriate for the data.
The instructor may have known that the linear model is incorrect because the residual plot showed a pattern. If the residuals are randomly distributed around zero, then it indicates that the linear model is appropriate for the data. However, if the residuals show a pattern, then it indicates that the linear model is not appropriate for the data. In this case, the instructor suggested that the student try a quadratic model because it is possible that the relationship between the variables is not linear but rather quadratic.
To know more about regression model, visit:
https://brainly.com/question/31969332
#SPJ11
assuming that the population mean is 47.2 and the population deviation is 6.4, what is the zobt value for a sample mean of 52.1 if n = 8?
The zobt value for a sample mean of 52.1 with a population mean of 47.2 and a population deviation of 6.4, and a sample size of 8 is approximately 3.19.
We can use the formula for calculating the z-score:
z = (x - μ) / (σ / √n)
where x is the sample mean, μ is the population mean, σ is the population deviation, and n is the sample size.
Plugging in the given values, we get:
z = (52.1 - 47.2) / (6.4 / √8) ≈ 3.19
Therefore, the zobt value for a sample mean of 52.1 with a population mean of 47.2 and a population deviation of 6.4, and a sample size of 8 is approximately 3.19.
Learn more about population here
https://brainly.com/question/29885712
#SPJ11
Can someone please explain the HL Congruence Property, HA Congruence Property, LL Congruence Property, and the LA Congruence Property
HL stands for hypotenuse-Leg
HA stands for angle-angle
LL stands for side-side
LA stands for angle-side.
What are the congruence property?HL Congruence Property: This property states that if the hypotenuse and a leg of one right triangle are congruent to the hypotenuse and a leg of another right triangle, then the two triangles are congruent.
HA Congruence Property: This property states that if two angles and a non-included side of one triangle are congruent to two angles and a non-included side of another triangle, then the two triangles are congruent.
LL Congruence Property: This property states that if the corresponding sides of two triangles are congruent, then the two triangles are congruent.
LA Congruence Property: This property states that if two angles and the included side of one triangle are congruent to two angles and the included side of another triangle, then the two triangles are congruent.
Learn more about congruence property here: https://brainly.com/question/30091300
#SPJ1
The HL Congruence Property, HA Congruence Property, LL Congruence Property, and LA Congruence Property are properties used to prove that two triangles are congruent. Congruent triangles have the same size and shape.
1. HL Congruence Property:
The HL Congruence Property states that if the hypotenuse and one leg of a right triangle are congruent to the hypotenuse and one leg of another right triangle, then the two triangles are congruent. "HL" stands for "Hypotenuse-Leg." This property is based on the fact that if the hypotenuse and one leg of a right triangle are equal to the corresponding parts of another right triangle, then all three corresponding sides of the triangles will be equal, and the triangles will have the same shape.
For example, if we have two right triangles, triangle ABC and triangle DEF, and we know that AB is congruent to DE (one leg), and AC is congruent to DF (hypotenuse), then we can conclude that triangle ABC is congruent to triangle DEF.
2. HA Congruence Property:
The HA Congruence Property states that if two angles and the side between them of one triangle are congruent to two angles and the side between them of another triangle, then the two triangles are congruent. "HA" stands for "Angle-Side-Angle." This property is based on the fact that if two angles and the side between them are equal in two triangles, then the remaining angles and sides will also be equal, and the triangles will have the same shape.
For example, if we have two triangles, triangle ABC and triangle DEF, and we know that angle A is congruent to angle D, angle B is congruent to angle E, and side AB is congruent to side DE, then we can conclude that triangle ABC is congruent to triangle DEF.
3. LL Congruence Property:
The LL Congruence Property states that if two pairs of corresponding sides of two triangles are congruent, then the triangles are congruent. "LL" stands for "Leg-Leg." This property is based on the fact that if two pairs of corresponding sides of two triangles are equal, then the remaining side and angles will also be equal, and the triangles will have the same shape.
For example, if we have two triangles, triangle ABC and triangle DEF, and we know that AB is congruent to DE and BC is congruent to EF, then we can conclude that triangle ABC is congruent to triangle DEF.
4. LA Congruence Property:
The LA Congruence Property states that if two pairs of corresponding angles of two triangles are congruent, and the included sides are congruent, then the triangles are congruent. "LA" stands for "Leg-Angle." This property is based on the fact that if two pairs of corresponding angles and the included side of two triangles are equal, then the remaining side and angles will also be equal, and the triangles will have the same shape.
For example, if we have two triangles, triangle ABC and triangle DEF, and we know that angle A is congruent to angle D, angle B is congruent to angle E, and side AB is congruent to side DE, then we can conclude that triangle ABC is congruent to triangle DEF.
These properties provide a way to prove that two triangles are congruent by comparing their corresponding sides and angles. By identifying congruent parts, we can establish the congruence of the entire triangle. Remember to apply the appropriate property based on the given information to determine the congruence of triangles.
To know more about Congruence Property refer here:
https://brainly.com/question/31992651#
#SPJ11
Write the net cell equation for this electrochemical cell. Phases are optional. Do not include the concentrations. Sn(s)∣∣Sn2+(aq, 0.0155 M)‖‖Ag+(aq, 2.50 M)∣∣Ag(s) net cell equation: Calculate ∘cell , Δ∘rxn , Δrxn , and cell at 25.0 ∘C , using standard potentials as needed. (in KJ/mole for delta G)∘cell= ?Δ∘rxn= ?Δrxn=?cell= V
The electrochemical cell is composed of a tin electrode in contact with a solution containing Sn2+ ions, separated by a salt bridge from a silver electrode in contact with a solution containing Ag+ ions. The net cell equation is Sn(s) + 2Ag+(aq) → Sn2+(aq) + 2Ag(s).
The net cell equation shows the overall chemical reaction occurring in the electrochemical cell. In this case, the tin electrode undergoes oxidation, losing two electrons to become Sn2+ ions in solution, while the silver ions in solution are reduced, gaining two electrons to form silver metal on the electrode. The standard reduction potentials for the half-reactions are E°(Ag+/Ag) = +0.80 V and E°(Sn2+/Sn) = -0.14 V. The standard cell potential can be calculated using the formula E°cell = E°(cathode) - E°(anode), which yields a value of E°cell = +0.94 V.
The Gibbs free energy change for the reaction can be calculated using ΔG° = [tex]-nFE°cell,[/tex] where n is the number of electrons transferred in the balanced equation and F is the Faraday constant. In this case, n = 2 and F = 96485 C/mol, so ΔG° = -nFE°cell = -181.5 kJ/mol. The non-standard cell potential can be calculated using the Nernst equation, which takes into account the concentrations of the reactants and products, as well as the temperature. The standard Gibbs free energy change can be used to calculate the equilibrium constant for the reaction, which is related to the non-standard cell potential through the equation ΔG = -RTlnK. Overall, the electrochemical cell involving tin and silver electrodes has a high standard cell potential and a negative standard Gibbs free energy change, indicating that it is a spontaneous reaction that can be used to generate electrical energy.
Learn more about equilibrium here:
https://brainly.com/question/30807709
#SPJ11
What is the 2nd random number using a linear congruent generator with a = 4, b = 1, m = 9 and a seed of 5? (Enter your answer to the 4th decimal place.)
The second random number in the linear congruent sequence generated by a = 4, b = 1, m = 9, and a seed of 5 is approximately 0.2222, rounded to the fourth decimal place.
What is the 2nd random number generated by a linear congruent generator with a = 4, b = 1, m = 9 and a seed of 5?To generate a sequence of random numbers using a linear congruent generator, we use the formula:
Xn+1 = (aXn + b) mod m
where Xn is the current random number, Xn+1 is the next random number in the sequence, and mod m means taking the remainder after dividing by m.
Given a = 4, b = 1, m = 9, and a seed of 5, we can generate the sequence of random numbers as follows:
X0 = 5X1 = (45 + 1) mod 9 = 2X2 = (42 + 1) mod 9 = 8X3 = (48 + 1) mod 9 = 0X4 = (40 + 1) mod 9 = 1X5 = (4*1 + 1) mod 9 = 5Therefore, the 2nd random number in the sequence is X1 = 2 (rounded to the 4th decimal place).
Learn more about linear congruent
brainly.com/question/24583039
#SPJ11
consider the following function. f(x) = x ln(8x), a = 1, n = 3, 0.5 ≤ x ≤ 1.5 (a) approximate f by a taylor polynomial with degree n at the number a.
The third-degree Taylor polynomial of f(x) at a=1 is P3(x) = ln(8) + (x-1)(ln(8)+1) + (1/2)(x-1)^2 - (1/6)(x-1)^3.
To approximate f(x) by a Taylor polynomial with degree n=3 at a=1, we need to find the values of f(1), f'(1), f''(1), and f'''(1) first:
f(x) = x ln(8x)
f(1) = 1 ln(8) = ln(8)
f'(x) = ln(8x) + x(1/x) = ln(8x) + 1
f'(1) = ln(8) + 1
f''(x) = 1/x
f''(1) = 1
f'''(x) = -1/x^2
f'''(1) = -1
Now, we can use the Taylor polynomial formula:
[tex]P3(x) = f(a) + f'(a)(x-a) + (f''(a)/2!)(x-a)^2 + (f'''(a)/3!)(x-a)^3[/tex]
P3(x) = ln(8) + (ln(8)+1)(x-1) + (1/2!)(x-1)^2 - (1/3!)(x-1)^3
P3(x) = ln(8) + (x-1)(ln(8)+1) + (1/2)(x-1)^2 - (1/6)(x-1)^3
Therefore, the third-degree Taylor polynomial of f(x) at a=1 is P3(x) = ln(8) + (x-1)(ln(8)+1) + (1/2)(x-1)^2 - (1/6)(x-1)^3.
Learn more about Taylor polynomial here:
https://brainly.com/question/31419648
#SPJ11
Find the equation of thw straight line through the point (4. -5)and is (a) parallel as well as (b) perpendicular to the line 3x+4y=0
Given information: A straight line through the point (4, -5).A line equation 3x + 4y = 0We need to find the equation of straight line through the point (4, -5) which is parallel and perpendicular to the given line respectively.
Concepts Used: Equation of a straight line in point-slope form. m Equation of a straight line in slope-intercept form. Method to solve the problem: We need to find the equation of straight line through the point (4, -5) which is parallel and perpendicular to the given line respectively.1. Equation of straight line parallel to the given line and passing through the point (4, -5):Equation of the given line 3x + 4y = 0 can be written in slope-intercept form as: y = (-3/4)x We can observe that the slope of given line is -3/4.
Now, the slope of the parallel line will also be -3/4 and the equation of the required straight line can be written in point-slope form as: y - y1 = m(x - x1)where m = -3/4 (slope of the line), (x1, y1) = (4, -5) (the given point)Therefore, y - (-5) = (-3/4)(x - 4)y + 5 = (-3/4)x + 3y = (-3/4)x - 2This is the equation of the straight line parallel to the given line and passing through the point (4, -5).2. Equation of straight line perpendicular to the given line and passing through the point (4, -5):We can observe that the slope of given line is -3/4.Now, the slope of the perpendicular line will be 4/3 and the equation of the required straight line can be written in point-slope form as:y - y1 = m(x - x1)where m = 4/3 (slope of the line), (x1, y1) = (4, -5) (the given point)
To know more about perpendicular visit:
brainly.com/question/12746252
#SPJ11
If the definite integral (In x dx is approximated by 3 circumscribed rectangles of equal width on the x-axis, then the approximation is (A) ¿(In3 + 1n5 + In7) (B) Ź (In1 + 1n3 + In5) (C) 2(In3 + In5 + In7) (D) 2(In3 + In5)
The approximation for the given definite integral 2(In3 + In5 + In7).
To approximate the definite integral of In x dx using circumscribed rectangles, we need to divide the interval [1,7] into three equal parts.
The width of each rectangle will be (7-1)/3 = 2.
The height of each rectangle will be the value of In x at the right endpoint of each interval, since we are using circumscribed rectangles.
So, our three rectangles will have heights of In3, In5, and In7.
The area of each rectangle will be the width multiplied by the height, so we have:
Rectangle 1: 2 * In3
Rectangle 2: 2 * In5
Rectangle 3: 2 * In7
Adding these areas together, we get:
2 * In3 + 2 * In5 + 2 * In7
Simplifying, we can factor out a 2:
2 * (In3 + In5 + In7)
Therefore, the approximation is option (C): 2(In3 + In5 + In7).
To know more about definite integral refer here:
https://brainly.com/question/29974649
#SPJ11
Suppose that a scientist seeks to compare the ability of a new hand sanitizer to eliminate Pseudomonas aeruginosa bacteria against the hand sanitizer currently in use. Assume that the mean number of bacteria remaining on a hand after using sanitizer is approximately normally distributed; however, the population standard deviation is unknown.
The scientist selects a simple random sample of 57 students. Each subject uses the new hand sanitizer on one randomly‑chosen hand and the sanitizer currently in use on the other. The number of Pseudomonas aeruginosa bacteria remaining on each hand after using the sanitizers is determined, and the difference in the number of bacteria on the hand treated with the new sanitizer and the number of bacteria on the hand treated with the current sanitizer is determined.
Choose the procedure for estimating the mean difference.
A. Two sample test for a difference in means
B. One sample confidence interval for paired data
C. Two sample confidence interval for a difference in means
D. One sample confidence interval for a difference in means
E. One sample test for paired data
The appropriate procedure for estimating the mean difference in this scenario is one sample confidence interval for paired data. The correct option is B.
Understanding Sample Confidence IntervalIn this study, each subject uses both the new hand sanitizer and the sanitizer currently in use, with the number of bacteria measured for each hand. This is a paired design, as each subject serves as their own control.
By using a one sample confidence interval for paired data, we can estimate the mean difference in the number of bacteria between the two sanitizers and determine the level of confidence in the estimate. This approach takes into account the paired nature of the data and provides a confidence interval specifically tailored for such situations.
Learn more about confidence interval here:
https://brainly.com/question/15712887
#SPJ4
The u.s. federal ban on assault weapons expired in september 2004, which meant that after 10 years (since the ban was instituted in 1994) there were certain types of guns that could be manufactured legally again. a poll asked a random sample of 1,200 eligible voters (among other questions) whether they were satisfied with the fact that the law had expired. out of the 1200 voters, 142 said they were satisfited with the fact that the law had expired. ( meaning that 1200 - 142 = 1058 were not satisfied). (data were generated based on a poll conducted by nbc news/wall street journal poll).
we would like to estimate p, the proportion of u.s. eligible voters who were satisfied with the expiration of the law, with a 95% confidence interval.
problems with proportions, will generally give an x value, the number of individuals answering a certain way, and the n value, the total number of individuals in the sample.
for this problem, n=1200, and x=142, the number satisfied.
to have the calculator calculate the 95% confidence interval for p:
choose: stat → tests → a: 1-propzint
for x: enter 142
for n: enter 1200
for c_level: enter .95 for a (95%) confidence interval.
press: calculate
based on the output:
how many of the 1,200 sampled voters were satisfied?
answer = correct
what is the sample proportion (ˆpp^ )(note: ˆp=xnp^=xn) of those who were satisfied?
answer = correct (round to four decimal places)
what is the upper limit of the 95% confidence interval for p? interpret this interval.
answer = incorrect (round to four decimal places)
Answer: The percentage of eligible voters who were satisfied with the expiration of the U.S. federal ban on assault weapons is 11.83%.
The percentage of eligible voters who were satisfied with the expiration of the U.S. federal ban on assault weapons is calculated as follows:
Total number of eligible voters who were not satisfied = 1,200 - 142 = 1058.Percentage of eligible voters who were satisfied = (142 / 1,200) x 100% = 11.83%.Therefore, the percentage of eligible voters who were satisfied with the expiration of the U.S. federal ban on assault weapons is 11.83%.
Explanation :To find the percentage of eligible voters who were satisfied with the expiration of the U.S. federal ban on assault weapons, we need to divide the number of voters who were satisfied by the total number of eligible voters who participated in the poll and then multiply the result by 100%.The total number of eligible voters who participated in the poll is given as 1,200, and out of these, 142 were satisfied with the fact that the law had expired.
So, we can calculate the percentage of eligible voters who were satisfied as follows:
Percentage of eligible voters who were satisfied = (142 / 1,200) x 100% = 11.83%.Hence, the percentage of eligible voters who were satisfied with the expiration of the U.S. federal ban on assault weapons is 11.83%.
Know more about U.S. federal ban on assault weapons here:
https://brainly.com/question/18882864
#SPJ11
if code contains these 3 constant time operations (x = 26.6, system.out.println(x), z = x y), they are collectively considered 1 constant time operation
the three operations you mentioned would each be considered O(1) time complexity, and their total time complexity would be O(3) = O(1). However, they would not be considered as one constant time operation.
No, the three operations you mentioned would not be considered as one constant time operation. Each of these operations has its own cost and takes a certain amount of time to execute.
Assigning a value to a variable, such as x = 26.6, is a simple operation that takes constant time, usually considered O(1) time complexity.
Printing the value of a variable to the console using System.out.println(x) involves some I/O operations and can take some time, but it is generally assumed to take constant time as well.
The last operation you mentioned, z = x y, is not a valid operation in Java. However, assuming you meant z = x * y, this is a simple arithmetic operation that also takes constant time.
To learn more about variable visit:
brainly.com/question/17344045
#SPJ11
A random sample of 19 companies from the Forbes 500 list was selected, and the relationship between sales (in hundreds of thousands of dollars) and profits (in hundreds of thousands of dollars) was investigated by regression. The following simple linear regression model was used
Profits = α + β (Sales)
where the deviations were assumed to be independent and Normally distributed, with mean 0 and standard deviation σ. This model was fit to the data using the method of least squares. The following results were obtained from statistical software.
r2 = 0.662 s = 466.2
Parameter Parameter est. Std. err. of parameter est.
α –176.644 61.16
β 0.092498 0.0075
part I
The slope of the least-squares regression line is (approximately)
a) 0.09. b) 0.0075. c) –176.64. d) 61.16.
part II
A 90% confidence interval for the slope β in the simple linear regression model is (approximately)
a) –176.66 to –176.63. b) 0.079 to 0.106. c) 0.071 to 0.114. d) None of the above
The 90% confidence interval for the slope β is approximately (0.079 to 0.106), which is option b.
Part I:
The slope of the least-squares regression line is 0.092498, which is option b.
Part II:
To find the confidence interval for the slope β, we use the formula:
β ± t* (s/√n)
where t is the t-value for a 90% confidence interval with (n-2) degrees of freedom, s is the standard error of the estimate, and n is the sample size.
From the output, we have s = 466.2 and n = 19.
To find the t-value, we can use a t-distribution table or a calculator. For a 90% confidence interval with 17 degrees of freedom, the t-value is approximately 1.734.
Substituting the values, we get:
0.092498 ± 1.734 * (466.2/√19)
Simplifying, we get:
0.092498 ± 0.099
Therefore, the 90% confidence interval for the slope β is approximately (0.079 to 0.106), which is option b.
learn more about confidence interval
https://brainly.com/question/13574945
#SPJ11
Two dice are tossed. Let X be the absolute difference in the number of dots facing up. (a) Find and plot the PMF of X. (b) Find the probability that X lessthanorequalto 2. (c) Find E[X] and Var[X].
a. the probabilities for X = 3, X = 4, and X = 5. The PMF of X can be plotted as a bar graph, with X on the x-axis and P(X) on the y-axis. b. Var[X] = E[X^2] - (E[X])^2
(a) To find the PMF (Probability Mass Function) of X, we need to consider all possible outcomes when two dice are tossed. There are 36 possible outcomes, each of which has a probability of 1/36. The absolute difference in the number of dots facing up can be 0, 1, 2, 3, 4, 5. We can calculate the probabilities of these outcomes as follows:
When the absolute difference is 0, the numbers on both dice are the same, so there are 6 possible outcomes: (1,1), (2,2), (3,3), (4,4), (5,5), and (6,6). The probability of each outcome is 1/36. Therefore, P(X = 0) = 6/36 = 1/6.
When the absolute difference is 1, the numbers on the dice differ by 1, so there are 10 possible outcomes: (1,2), (2,1), (2,3), (3,2), (3,4), (4,3), (4,5), (5,4), (5,6), and (6,5). The probability of each outcome is 1/36. Therefore, P(X = 1) = 10/36 = 5/18.
When the absolute difference is 2, the numbers on the dice differ by 2, so there are 8 possible outcomes: (1,3), (3,1), (2,4), (4,2), (3,5), (5,3), (4,6), and (6,4). The probability of each outcome is 1/36. Therefore, P(X = 2) = 8/36 = 2/9.
Similarly, we can find the probabilities for X = 3, X = 4, and X = 5. The PMF of X can be plotted as a bar graph, with X on the x-axis and P(X) on the y-axis.
(b) To find the probability that X ≤ 2, we need to add the probabilities of X = 0, X = 1, and X = 2. Therefore, P(X ≤ 2) = P(X = 0) + P(X = 1) + P(X = 2) = 1/6 + 5/18 + 2/9 = 11/18.
(c) To find the expected value E[X], we can use the formula E[X] = ∑x P(X = x). Using the PMF values calculated in part (a), we get:
E[X] = 0(1/6) + 1(5/18) + 2(2/9) + 3(1/6) + 4(1/18) + 5(1/36)
= 35/12
To find the variance Var[X], we can use the formula Var[X] = E[X^2] - (E[X])^2, where E[X^2] = ∑x (x^2) P(X = x). Using the PMF values calculated in part (a), we get:
E[X^2] = 0^2(1/6) + 1^2(5/18) + 2^2(2/9) + 3^2(1/6) + 4^2(1/18) + 5^2(1/36)
= 161/18
Therefore, Var[X] = E[X^2] - (E[X])^2
Learn more about probabilities here
https://brainly.com/question/25839839
#SPJ11