Which statement correctly describes the conductivity of the specified material?


Gold has a high conductivity


Most plastics have a high conductivity


Most wires are made to have a low conductivity


Copper has a low conductivity

The diagram shows a picture of a compound.

A compound is a substance that is made up of two or more different elements that are chemically bonded together in a specific ratio.

This means that the elements are combined in a way that creates a new substance with different physical and chemical properties than the individual elements.

Compounds can be formed through a variety of chemical reactions, such as combining elements through a chemical bond or through a reaction between an acid and a base.

So for the given diagram, we can see that it represents two or more elements chemically combined.

Learn more about a compound here: https://brainly.com/question/29108029

#SPJ1

Answer:

Explanation:

Charles Law

V1/T1 = V2/T2

T2= T1V2/V1  = 384.15 X 3/2=576.23K or 303.08 Celsius

The majority of laboratory equipment is constructed of glass, since it is an easy-to-clean material and allows for good vision. The majority of the chemicals used in studies don't react with it.

The fact that glass equipment is transparent, which enables researchers to easily monitor the chemical reactions and physical changes occurring within, is one of its main advantages.

This is especially crucial in investigations when the reaction's color or appearance is crucial to comprehending the underlying chemistry. The majority of the chemicals used in studies don't react with it.

Learn more about laboratory, here:

https://brainly.com/question/27748008

#SPJ1

Answer:

I guess correct option is A.

Answer:

Comets are small, icy objects that have very elliptical orbits. When they are close to the Sun, they form comas and tails, which glow and make the comet more visible.

Explanation:

Hope This Helps!!

(brainliest please, if possible)

Answer:

comet's

Explanation:

what the other user said

Keep temperature constant and increase the pressure of the reaction; reaction rate will increase.

option A.

Boyle's law states that pressure of a given mass of a gas is directly proportional to its volume provided, temperature of the gas is kept constant.

Le Chatelier's Principle states that if a dynamic equilibrium is disturbed by changing the conditions, the position of equilibrium shifts to counteract the change to reestablish an equilibrium.

So the experimental plans that will test the effects of pressure on a reaction with gases and its expected result is keep temperature constant and increase the pressure of the reaction; reaction rate will increase.

Thus, option A is the correct answer.

Learn more about pressure of reaction here: https://brainly.com/question/30917518

#SPJ1

A silent mutation is a type of mutation that has no effect on protein function. This is because the mutation does not change the amino acid sequence of the protein.

Silent mutations can happen when a single base pair in the DNA is altered without changing the amino acid that the codon is meant to encode. For instance, a silent mutation could turn the initial G in the codon for the amino acid alanine from GCG to A, creating the codon GCA. The function of the protein is unaffected since the codon GCA still codes for the amino acid alanine.

The most frequent sort of mutation is a silent mutation, which can be brought on by a number of things, including mistakes in DNA replication, contact with environmental mutagens, and random chance. Silent mutations typically have no detrimental effects on the organism.

Learn more about silent mutations here : brainly.com/question/30280461

#SPJ1

Answer:

increase concentration of reactants

Explanation:

I took the test

Answer:8.18 moles C

Explanation:

98.22g x 1 mole C/ 12.011g = 8.18 moles C

Answer:

A) The effect on the net reaction catalyzed by glyceraldehyde is that

The 1-arsen0, 3-phosphoglycerate will decompose without enzymes hence no ATP will be formed in the reaction ( phosphoglycerate Kinase )

B) There will be  no conversion of ADP to ATP from the conversion of glucose to pyruvate hence No balanced overall equation can be derived

C ) Arsenate is very toxic to most organisms and it is used mostly regarded  as poisons during the formation of glycolysis, it forms  1-arsen0, 3-phosphoglycerate which  hinders the formation of ATP because it is unstable and will hydrolyze quickly, this will also lead to the reduction in oxygen in cells thereby leading to the death of cells

Explanation:

A) The effect on the net reaction catalyzed by glyceraldehyde is that

The 1-arsen0, 3-phosphoglycerate will decompose without enzymes hence no ATP will be formed in the reaction ( phosphoglycerate Kinase )

B) There will be  no conversion of ADP to ATP from the conversion of glucose to pyruvate hence No balanced overall equation can be derived

C ) Arsenate is very toxic to most organisms and it is mostly regarded as  poisons during the formation of glycolysis, it forms  1-arsen0, 3-phosphoglycerate which  hinders the formation of ATP because it is unstable and will hydrolyze quickly, this will also lead to the reduction in oxygen in cells thereby leading to the death of cells

Those structures that are similar in all behavior is called homologous structure.

The answer of the following question is as follows:-

For more information, refer to the link:-

https://brainly.com/question/15804584

Heat transfer plays a crucial role in various aspects of our everyday lives. Here are five examples of how heat transfer occurs in our daily activities:

Cooking; Cooling; Central Heating; Ironing; Showering

Cooking: Heat is transferred from a stove or an oven to the cooking utensils and food. Conduction occurs when the heat is transferred through direct contact between the heat source and the cooking pan. Convection takes place when hot air circulates around the food, evenly cooking it. Radiation is also involved when heat is emitted by the heating elements and absorbed by the food.

Cooling: Heat transfer is essential in cooling processes, such as using refrigerators or air conditioning systems. In refrigeration, heat is transferred from the interior of the refrigerator to the outside environment through the process of convection and radiation. In air conditioning, heat is absorbed from the indoor air and released outside, again utilizing convection and radiation.

Central Heating: Many homes and buildings use central heating systems to warm up indoor spaces. Heat is produced by a furnace or boiler and then distributed through convection and radiation. Radiators or air vents release the heated air, raising the temperature in the rooms.

Ironing: Ironing clothes involves the transfer of heat to remove wrinkles. The iron's heating element conducts heat to the metal plate, which comes into direct contact with the fabric. Conduction transfers heat from the iron to the clothes, causing the fibers to relax and remove the wrinkles.

Showering: When taking a hot shower, heat transfer is involved in multiple ways. Firstly, conduction occurs as the hot water comes into contact with your skin, transferring heat. Secondly, convection takes place as the warm water surrounds your body, creating a warm sensation. Lastly, radiation occurs as the hot water radiates heat, making the shower enclosure feel warm.

These are just a few examples, but heat transfer is involved in numerous other activities, from using hairdryers to heating water for tea. Understanding heat transfer is crucial for designing efficient systems and ensuring our comfort and safety in everyday life.

For more question on Heat click on

https://brainly.com/question/30738335

#SPJ11

The new volume of the sample of argon, in L, will be 1.43 L.

At STP (Standard Temperature and Pressure), the temperature is 0 °C (273 K) and the pressure is 1 atm. Therefore, the initial conditions can be expressed as:

T1 = 273 K

P1 = 1 atm

V1 = 1.20 L

To find the new volume, we can use the combined gas law:

(P1V1) / T1 = (P2V2) / T2

We can rearrange this equation to solve for V2:

V2 = (P1V1T2) / (P2T1)

Substituting the given values, we get:

V2 = (1 atm x 1.20 L x 301 K) / (0.800 atm x 273 K)

V2 = 1.43 L

At a temperature of 28.0 °C and a pressure of 0.800 atm, the new volume of the argon sample is 1.43 L.

To know more about the Pressure, here

https://brainly.com/question/18698171

#SPJ1

The type of weathering that occurred at the XIT Ranch after a very cold winter causing new cracks in the landscape is frost wedging. From 1885 to 1912, the Texas Panhandle's XIT Ranch served as a cattle ranch.

The ranch was one of the largest in the world at the time, with an original area of ​​over 3 million acres. It was established as a joint venture between the state of Texas and Capital Syndicate, a group of Chicago-based businessmen. The ranch had a tremendous influence on the history of the American West, and Texas continues to be influenced by it today.

Therefore, the correct option is A.

Learn more about Ranch here:

https://brainly.com/question/30841932

#SPJ1

Your question is incomplete, most probably the complete question is:

The XIT Ranch is located in the Panhandle ecoregion of Texas. After a very cold winter, the vaqueros of the XIT Ranch found that several new cracks had opened in the landscape. What type of weathering occurred at the XIT Ranch?

The steps in the engineering process in order is D. Identifying a problem, brainstorming solutions, researching the background of each solution, testing solutions, choosing a solution, production, making future improvements.

The initial step involves recognizing the predicament that requires resolution. One may achieve this through collaborating with fellow engineers, consulting customers, or conducting studies. After recognizing the issue at hand, the subsequent course of action involves generating ideas or solutions to address it. One way to achieve this is to generate a large number of ideas.

The subsequent phase necessitates the experimentation of potential answers. To achieve this, one must take into account both the outcomes of the assessments and the advantages and disadvantages associated with every proposed resolution. The subsequent action entails generating the resolution. One way to accomplish this is to create a prototype, while another is to manufacture the solution in large quantities. The last stage involves enhancing forthcoming developments.

Find out more on the engineering process at https://brainly.com/question/19369851

#SPJ1

If the [OH-] concentration is 5.9 x 10^(-M), the pOH of the solution is approximately -4.77 and the solution is basic.

To calculate the pOH of a solution, we can use the formula:

pOH = -log[OH-]

Given that the [OH-] concentration is 5.9 x 10^(-M), we can substitute this value into the formula:

pOH = -log(5.9 x 10^(-M))

Calculating this expression, we find:

pOH = -log(5.9 x 10^(-M))

pOH ≈ -log(5.9) + (-log(10^(-M)))

Since log(10^(-M)) is equal to -M, the equation simplifies to:

pOH ≈ -log(5.9) - M

Now, we need the value of M (the exponent) to calculate the exact pOH value. It appears that the value of M is missing in the given information. However, assuming M is a positive value, we can continue the calculation.

If we consider M = 6, for instance, the equation becomes:

pOH ≈ -log(5.9) - 6

Now, we can evaluate the expression:

pOH ≈ 1.23 - 6

pOH ≈ -4.77

Therefore, if the [OH-] concentration is 5.9 x 10^(-M), the pOH of the solution is approximately -4.77.

To determine whether the solution is acidic, basic, or neutral, we can use the relationship between pH and pOH. The sum of the pH and pOH of a solution at 25°C is always equal to 14.

Since pOH = -4.77, the pH would be:

pH = 14 - pOH

pH ≈ 14 - (-4.77)

pH ≈ 18.77

A solution with a pH above 7 is considered basic. In this case, the calculated pH is greater than 7. Therefore, the solution is basic.

for more questions on pOH
https://brainly.com/question/1420583
#SPJ11

Answer:

carbon

Explanation:

I hope this helps :)

Answer:

carbon

Explanation:

YOU CAN MARK ME AS BRAINIEST IF YOU WANT

Answer:

Explanation:

pOH = -log1.36 X 10^-10 = 9.87

pH = 14-pOH = 14-8.97 = 5.03

The pH of the solution is 10.82.

To solve this problem, we need to determine the concentration of the hydronium ion ([tex]H_3O^+[/tex]) in the solution. This can be done using the following steps:

Write the balanced chemical equation for the reaction between HBr and CH₃NH₂.

HBr + CH₃NH₂ → CH₃NH₃⁺ + Br⁻

Write the expression for the base dissociation constant (Kb) for CH₃NH₂.

Kb = [CH₃NH₃⁺][OH⁻]/[CH₃NH₂]

Calculate the concentration of hydroxide ions (OH⁻) in the solution using the Kb value and the concentration of CH₃NH₂.

Kb = [CH₃NH₃⁺][OH⁻]/[CH₃NH₂]

4.4 × 10⁻⁴ = x² / (0.400 M)

x = 6.63 × 10⁻³ M

[OH⁻] = 6.63 × 10⁻³ M

Calculate the concentration of [tex]H_3O^+[/tex] using the equilibrium constant for the reaction between HBr and [tex]H_2O[/tex].

[tex]HBr + H_2O = H_3O^+ + Br^-[/tex]

[tex]Kw = [H_3O^+][OH^-] = 1.0 * 10^{-14}\\[H_3O^+] = Kw/[OH-] = 1.51 * 10^{-11}[/tex]

Calculate the pH using the concentration of [tex]H_3O^+[/tex].

[tex]pH = -log[H_3O^+]\\pH = -log(1.51 * 10^{-11})[/tex]

pH = 10.82

For more question on pH click on

https://brainly.com/question/172153

#SPJ11

Answer:

Hydrogen H 3.330% Carbon C 26.450% Oxygen O 35.234%

Explanation:

Answer:

Pretty sure it's C

Explanation:

The energy of light with a wavelength of 589 nm is approximately 3.36 × 10^(-19) Joules.

To calculate the energy of light, we can use the equation E = hc/λ, where E represents the energy, h is Planck's constant (6.626 × 10^(-34) J·s), c is the speed of light in a vacuum (3.00 × 10^8 m/s), and λ is the wavelength of light.

Given that the wavelength is 589 nm (which is equivalent to 589 × 10^(-9) m), we can substitute the values into the equation:

E = (6.626 × 10^(-34) J·s × 3.00 × 10^8 m/s) / (589 × 10^(-9) m)

Simplifying the equation, we get:

E = (1.9778 × 10^(-25) J·m) / (5.89 × 10^(-7) m)

Dividing these values, we find:

E ≈ 3.36 × 10^(-19) J

For more such questions on energy

https://brainly.com/question/30128198

#SPJ11

Answer:

The molarity of Carl's sugar solution can be calculated using the formula:

Molarity = moles of solute / liters of solution

First, we need to determine the number of moles of sucrose in the solution. We can do this using the formula:

moles = mass / molar mass

The mass of sucrose is 400 grams, and the molar mass is 342.3 g/mol:

moles = 400 g / 342.3 g/mol

moles = 1.167 mol

Now we can calculate the molarity by dividing the moles by the liters of solution (which is 1.00 L):

Molarity = 1.167 mol / 1.00 L

Molarity = 1.2 M

Therefore, the molarity of Carl's sugar solution is 1.2 M. Answer: 1.2 M.

Explanation:

Answer:

The correct answer is B. equals mass divided by volume

Answer:

They were right, I got all the questions right. If you need answers I got them I guess?

Explanation:

Dietary fats include polyunsaturated fat. Along with monounsaturated fat, it is one of the good fats. Foods like salmon, vegetable oils, and other plant- and animal-based foods include polyunsaturated fat. They act as precursors of other molecules. The given statement is true.

Precursors of eicosanoids with hormone-like properties including prostaglandins, leukotrienes, and thromboxanes are polyunsaturated fatty acids (PUFA).

Dihomo-linolenic acid (DGLA), arachidonic acid (AA), and eicosapentaenoic acid (EPA) are the three precursors that prostaglandins can be formed from. Depending on the precursor, series 1, 2, or 3 prostanoids is produced.

To know more about Polyunsaturated fatty acids, visit;

https://brainly.com/question/12409149

#SPJ1

Answer:

The Answer will be provided below, please pay attention in class next time so that you don't have to be in a hurry like you are in now.

Explanation: The correct option is:

Both fossil fuels and wind energy can be used to produce electricity. However, burning fossil fuels does pollute the atmosphere, while using Earth's wind does not. Both fossil fuels and wind energy contribute to climate change, but the use of fossil fuels is much more damaging to the environment than the use of wind power.

Fossil fuels are non-renewable sources of energy that are formed over millions of years by the decomposition of organic matter. They release harmful greenhouse gases when burned, contributing to climate change. In contrast, wind energy is a renewable source of energy that uses turbines to harvest the power of wind. Wind energy does not produce any emissions, making it an environmentally friendly alternative to fossil fuels. While wind turbines can have some impacts on wildlife and habitats, the impact is much less severe than the effects of fossil fuel extraction and burning.

Added Part: Fossil fuels are non-renewable sources of energy that are derived from the remains of plants and animals that died millions of years ago. These sources include coal, oil, and natural gas. Wind energy, on the other hand, is a renewable source of energy that is generated by the kinetic energy of wind.

Here are some comparisons between fossil fuels and wind energy:

Environmental Impact: Fossil fuels have a significant negative impact on the environment. Burning fossil fuels produces greenhouse gases that contribute to climate change. The extraction of fossil fuels also has negative impacts on the air, water, and soil. Wind energy, however, has a very small environmental footprint. Wind turbines do not produce any emissions and do not require any water to generate electricity.

Energy Availability: Fossil fuels are abundant and have been the primary source of energy for decades. On the other hand, wind energy is a relatively new source of energy and the technology is still developing. However, the availability of wind energy is significant, as wind is a renewable source that is constantly available.

Sustainability: Fossil fuels are non-renewable, which means they will eventually run out. As the demand for energy continues to increase, the availability of fossil fuels will decrease. Wind energy is a renewable source of energy that will never run out.

Here are some pros and cons of both fossil fuels and wind energy:

Fossil Fuels:

Pros:

Reliable source of energy

High energy density

Large global infrastructure

Cons:

Non-renewable source of energy

Significant environmental impact

Price instability

Wind Energy:

Pros:

Renewable source of energy

Small environmental footprint

Low operating costs

Cons:

High initial costs for building wind turbines

Wind is an inconsistent source of energy

Can create noise pollution for surrounding communities

0.4141 grams of hydrogen gas will be produced from the reaction.

The balanced chemical equation for the reaction between hydrochloric acid (HCl) and zinc (Zn) can be written as follows:

2 HCl + Zn → ZnCl2 + H2

To determine the grams of hydrogen gas produced by each reactant, we need to use the concept of stoichiometry. First, we calculate the number of moles of each reactant.

The molar mass of HCl is approximately 36.5 g/mol, and the molar mass of Zn is approximately 65.4 g/mol.

For hydrochloric acid (HCl):

Number of moles = Mass / Molar mass = 7.5 g / 36.5 g/mol = 0.205 moles

For zinc (Zn):

Number of moles = Mass / Molar mass = 6.5 g / 65.4 g/mol = 0.0993 moles

According to the balanced equation, the mole ratio between HCl and H2 is 2:1. Therefore, for 0.205 moles of HCl, the theoretical yield of H2 is 0.205 moles.

The molar mass of hydrogen gas (H2) is approximately 2.02 g/mol.

To determine the mass of hydrogen gas produced:

Mass of H2 = Number of moles of H2 × Molar mass of H2

          = 0.205 moles × 2.02 g/mol

          = 0.4141 g

Therefore, 0.4141 grams of hydrogen gas will be produced from the reaction.

for more questions on hydrogen
https://brainly.com/question/24433860
#SPJ8

Answer:

C3H7O + O2 → CO2 + H2O

Explanation:

a) The full symbol equation for the oxidation reaction of an isomer of C3H7O can be represented as:

C3H7O + O2 → CO2 + H2O

b) The proper reagent for this oxidation reaction is O2 (oxygen gas). The catalyst required for this reaction depends on the specific conditions. Common catalysts used for oxidation reactions include transition metals such as platinum (Pt), palladium (Pd), or copper (Cu).

c) There is no need to remove the product (CO2 and H2O) from the reaction vessel because they are typically in the gas or liquid phase and do not significantly interfere with the reaction. The product gases can be easily vented out of the vessel, while the liquid water can be left in the reaction mixture. Additionally, the product CO2 is a stable and inert gas, which does not pose any hazards in most cases. Therefore, it is often not necessary to remove the products after the reaction is complete.

The compound that contains sterogenic centre is the 1,3,4-trichloropentane. That is option F.

Sterogenic centers are found in compounds where a carbon atom share four bonds to the carbon atom with each to different elements or functional groups.

From the list of example given above, the carbon atom of which Ch the second chloride is attached to is sharing bonds with carbon, hydrogen, chloride and another carbon.

Learn more about atom here:

https://brainly.com/question/20994647

#SPJ1

Answer:

Yes

Explanation:

According to the information, we can infer that the pie chart shows 1/8 of its surface corresponding to protein and fat, 1/2 would be carbohydrates and 1/4 would be fibers.

To draw a pie chart with the information from the nutritional table, we must take into account that the portions in grams are given with respect to a quantity of 100g of food. Therefore, if it says that it has 12.5g, it is equal to 12.5% of its content. Then we can infer that each grammage is equal to the percentage of that compound in the food.

Learn more about the pie chart in: https://brainly.com/question/1109099

#SPJ1